Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
|
|
- Jacob Edwards
- 6 years ago
- Views:
Transcription
1 Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height of 1.2mm. (Refer to Fig.1) 2. High frequency transmission This sereis offers the high performance needed to meet the requirements of many different miniature devices, featuring a DC to 6GHz capacity. 3. Automatic board placement This product is available in embossed packaging; this allows the plug and receptacles to be automatically mounted 4. Design to prevent wrong placement Different shape of shell and contact can prevent wrong placement with easy checking polarization. Product Specifications Ratings Nominal characteristic impedance Frequency range 50Ω DC to 6GHz Operating Temperature Range Storage Temperature Range -40 to +90 (RH 90% or less) -40 to +90 (RH 90% or less) Items 1.Contact resistance 2.V.S.W.R.( ) 3.Insulation resistance 4.Withstanding voltage Specifications(Plug type) 20mΩ (Inner), 20mΩ (Outer) at 10mA DC 1.3 max(dc~3ghz) 1.45max.(3GHz~6GHz) 500MΩmin. At 100V DC 200V AC r.m.s. for 1 minute V.S.W.R. Measurement System (plug type) The above V.S.W.R. specification values were measured using the measurement system shown below. Network Test Test Analyzer Set Port Test Port Cable D.U.T Termination Note1 : Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note2 : Board type connectors were mounted to a 50 glass epoxy board and measurements were conducted with SMA conversion adapters attached. 1
2 Cable Assembly (Plug) K.FL2-LP-040(Applicable cable : outer diameter (Ø0.81 or Ø0.64) Material/Finish Part Materials Finish and Remarks Shell Phosphor bronze Au plating Insulator PBT Black/UL94V-0 Contact Phosphor bronze Au plating * NOTE : This product satisfies halogen free requirements defined as 900ppm maximum chlorine. 900ppm maximum bromine and 1500ppm maximum total of chlorine and bromine. Cable Guide Description ф0.81mm Coaxial Cable ф0.64mm Coaxial Cable Cable Type Center Conductor 7/0.05(36AWG) Silver plated annealed copper wire 7/0.05(36AWG) Silver plated annealed copper wire Dielectric Diameter ф0.40 ф0.44 Cable Specification Outer Conductor Single-layer braided wire Tin plated Fiber or paper coverd copper winding wire Tin plated How to Specify Plug Cable Assembly Jacket Diam eter ф0.81 ф0.64 Nominal Impedance Nominal attenuation 3GHz 6GHz 5.8dB 5.8dB 9.4dB 9.4dB The dimensions of a cable assembly of the K.FL2 series should be specified as follows: [Double-Ended Cable Assembly] [Single-Ended Cable Assembly] Single ended assemblies come with a blunt cut on the non-terminated end. Please contact us if special strip requirements are needed. 2
3 Product Number Structure Refer to the charts below for determining specific part number characteristics. Please select connectors listed in this catalog when placing orders and be sure to check the latest delivery specifications at the time of ordering the product. Used Plug : K.FL2-LP-040 Ø0.81 Coaxial Cable Double-Ended Single-Ended K.FL2-2LP-0.4H [] T-A-(L) K.FL2- LP- 0.4H [] T-A-(L) 1Series Name: 2 Assembly type LP : Single-ended, 2LP : Double-ended 3Cable type 04H : Ø0.81 coaxial cable 4Cable color 1:White, 4:Blue, 6:Red 5Cable outer conductor T: Tin plated braided wire 6Total length L(mm) L length in mm Ø0.64 Coaxial Cable Double-Ended Single-Ended K.FL2-2LP-044H [] TS-A-(L) K.FL2-LP-044H [] TS-A-(L) 1Series Name: 2 Assembly type LP : Single-ended, 2LP : Double-ended 3Cable type 044H : Ø0.64 coaxial cable 4Cable color 1:White, 4:Blue, 6:Red 5Cable outer conductor TS : Tin plated fiber or paper covered copper winding wire 6Total length L(mm) L length in mm Standard Tolerances for (L) L(mm) Standard Tolerances(mm) 35 L 200 ±4 200 L 500 ±8 L(mm) Standard Tolerances(mm) 500 L 1000 ± < L ±1.5% 3
4 Receptacles Recommended PCB Mounting Pattern(*1) *1) The pattern is the same as the W.FL and W.FL2 connectors. Part No. HRS No. Packaging RoHS K.FL2-R-SMT-1(800) Reel packaging 10,000 pieces per reel Embossed Carrier Tape Dimensions(JIC-C-0806 compliant) Reel Dimensions 4
5 Usage Precautions 1.Plugs (1) Allowable load to a cable that is mated After the connector is mated, do not apply a load to the cable in excess of the values indicated in the figure below. When the cable is routed in such a direction that lifts the cable, it is recommended that cushioning should be placed on the plug to prevent the connector from unmating(see the example below) (2)Precautions Do not mate or unmate a connector with an excessive prying force. It may cause a failure of the connector. 5
6 2. Reflow conditions of receptacles and plug receptacles (1)Recommended reflow Soldering profile for lead free solder(reference) temperature profile[reference] (2)Recommended metal mask thickness (3)Reflow cycles 1. The temperatures indicated are the surface temperatures on the printed circuit board at the points of contact with the terminals. 2. Reflow soldering should be performed at a peak temperature of 250 or less at the surface of the printed circuit board. 3. The temperature profile varies depending on conditions such as the size of the printed circuit board, the solder paste type, and solder thickness. 0.1mm 2 times 3.Operating Environment and Storage Conditions (1) Operating environment This product was designed under the assumption that it would be used in a normal operating environment. Use of this connector under adverse environmental conditions may lead to discoloration or other kinds of degradation. Use of the connector in regions having exposure to excessive amounts of fine particles and dust, high densities of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses (e.g., exhaust gas from automobiles or factories), is not advised environments having a large difference in temperature, such as a place near a heater. (2) Storage conditions Store the product in Hirose Electric s packaging or similar packaging conditions. Temperature: -10 to +40, humidity : 85% or less (recommended storage conditions) Use the product within six months from delivery. Products for which the storage period has expired must be tested for solderability before the use. 6
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
More informationMicro Coaxial Connector. Ultrasmall Series with mating height 1.00 mm
MCC Micro Coaxial Connector Ultrasmall Series with mating height 1.00 mm IEEE802.11a b g n WiMAX Bluetooth Zigbee MIMO (Multiple input and multiple output) 1 USS RF V Plug Cable Assembly Mating height
More informationI-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
More informationI-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More informationMicrowave Coaxial Connectors
O0E.pdf 07.9. Microwave Coaxial Connectors Ultra Miniature SMT HSC Type Features 1. The mating height is only 1.2mm maximum by new mechanical design. Suitable for low profile design. 2. New mating mechanical
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More information- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
More informationUltra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationSECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
More informationCompact Coaxial Connectors Compatible with IEC (Type SMB) Standard SMT Type SMB Connector
COMPONENTS PRODUCT INFORMATION NEW Compact Coaxial Connectors Compatible with IEC60169-10 (Type SMB) Standard SMT Type SMB Connector CONNECTOR MB-0156-3 October 2010 SMT Type SMB Connector P/N No.: SMBR003D00
More informationUltra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height W.FL Series Occupied Mounting Area Features 1. Nominal mated height of 1.4mm or 1.65mm (Max. 1.55 or 1.85mm)(Fig.2) 2. Small board
More informationUSS RF I plug Connector series
DOC. No.: 651-0089-01 Rev.: D Page: 1/10 1. Application This style products are designed for Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc, LAN, Mini-PCI,,PDA,
More informationC240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More informationMicrowave Coaxial Connectors
!Note Please read rating and!cution (for storage and operating, rating, soldering and mounting, handling) in in this PDF catalog catalog to prevent to prevent smoking smoking and/or and/or burning, burning,
More informationSunridge MCF Series 2.0mm Mated Height Miniature Coaxial Interconnect
Sunridge MCF series coaxial product fulfills the rigorous requirements of high frequency RF signal transmission in digital world. In a miniature form factor of 3.0mm x 3.0mm PCB foot print by 2.0mm mated
More informationSunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height
Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationDC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationMCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationAmphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
More informationSunridge MCD Series Ultimate Miniature Coaxial Interconnect, 1.55mm Mated Height
Sunridge MCD series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCD
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More informationRF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
More informationRFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More informationSTANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationSMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationMMS/MMT MMCX CONTENTS PAGE MMS/MMT
MMCX CONTENTS PAGE MMS/MMT Introduction... 4 General... 5 Characteristics MMS... 6 Characteristics MMT... 7 Connectors...8-9 Plugs... 10 Standard cable assemblies...11-12 Receptacles... 13 Adapters...
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationMicrowave Coaxial Connectors
This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice.
More informationTRUtest Specifications. Electrical. Mechanical. Environmental. Requirement. Detail. 1.35:1 maximum. 0.4 db/ft GHz
TRUtest Series TRUtest Series cable assemblies combine MIL-standard test-grade interfaces with flexible and durable cable construction to provide repeatable, reliable performance and long service life.
More informationWelcome to the Hirose MS-162A product training module. This tutorial will introduce the MS-162A series and explain its features and benefits.
Welcome to the Hirose MS-162A product training module. This tutorial will introduce the MS-162A series and explain its features and benefits. 1 MS-162A Series is a RF coaxial switch for interface applications
More informationC195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C195-SMQM-3M Product Classification Brand Product Series Product Type CNT-195 CNT Jumper with interface types SMA Male and QMA Male, 3M CNT CNT-195 Braided cable assembly General Specifications Body Style,
More informationAmphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More informationPlug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
More informationAmphenol RF- BNC Connector Series
Page 1 of 7 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More informationPCB Footprint Max.Load Coil Voltage Non-Latching part number Single-coil latching part number Standard ground terminal (1GHz)
High Frequency Relay G6K-RF Surface Mount, 1GHz / 3 GHz Miniature DPDT, High Frequency Relay New Models with 3 GHz band available ( -T versions) Space-saving 1 GHz version with smaller ground terminal
More information0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
More informationATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.
ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions
More informationEC 200 CHARACTERISTICS D A T A S H E E T. Kabelwerk EUPEN AG cable. M e c h a n i c a l c h a r a c t e r i s t i c s
EC 200 EC200 - Rev. 3-23.06.11 Characteristic impedance 50 ± 2 Material copper wire Nominal capacity (pf/m) 80.5 Construction - Relative propagation velocity (%) 83 Diameter (mm) 1.05 Inductance (µh/m)
More information1 GHz capable, 3 W carrying power (at 1 GHz), 50Ω impedance and 2 Form C relays
1 GHz capable, 3 W carrying power (at 1 GHz), 5Ω impedance and 2 Form C relays RA RELAYS (ARA) 9.7 14.7.382.579 5.9.232 mm inch RoHS compliant Protective construction: Sealed type ORDERING INFORMATION
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationClass Sealing Fully sealed Contact configuration Rated coil voltage Model Basic Type SPDT 4.5 VDC G6Y-1 5 VDC 9 VDC 12 VDC 24 VDC
Switching Structure Based on the Micro Strip Line is Used to Combine High Performance and Costeffectiveness ROHS compliant. Isolation characteristics of 65 db or better at 900 MHz. Effective insertion
More informationHandling Precaution for Terminal and Connector
1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use
More informationFor board-to-fpc. Narrow pitch connectors (0.4mm pitch)
Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4F Series 3.0mm 2.4mm RoHS compliant FEATURES 1. 0.6 mm mated height low profile two-piece type connector 2. Space-saving
More informationSECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
More informationC400-UMUM-100. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C400-UMUM-100 Product Classification Brand Product Series Product Type CNT Jumper with interface types UHF Male and UHF Male, 30.48 m CNT Braided cable assembly General Specifications Body Style, Connector
More informationMINI CIRCULAR DIN PLUGS
MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current
More informationC400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications
C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationInitial release of document
This specification covers the requirements for application of SMT Poke In Connectors for use on printed circuit (pc) board based LED strip lighting typically used for sign lighting. The connector accommodates
More informationDATASHEET. It needs tuning process for customer s device. AMOTECH
Document Datasheet Type Dielectric Chip Antenna Application 1575.42 & 1592~1610MHz Part No. AMAN1003015ST03 Revision 1.0 DATASHEET Application GPS(1575.42 MHz) & Glonass (1592~1610 MHz) Features PIFA Structure
More informationBoard to Board Connector Board to Board Connector
Board to Board Connector Board to Board Connector GigaLane Board to Board connectors are especially developed for board-to-board and board-to-module RF interconnections. It is the perfect solution for
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationFor board-to-fpc. Narrow pitch connectors (0.4mm pitch)
Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm RoHS compliant FEATURES 1. 0.9 mm mated height low profile two-piece type connectors 2. Strong resistance
More information7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
More informationSPECIFICATION FOR APPROVAL. 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free)
DOCUMENT REVISION : SRK220000NH : A2 SPECIFICATION FOR APPROVAL PAGE : 1 OF 9 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to1.0mm x 0.5mm size 1/8W,
More informationMICROWAVE COAXIAL CONNECTORS
!Note Please read rating and!cution (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. O0E4.pdf 0.4.6 This catalog has only
More informationSMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
More informationPRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationQN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationTimes Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
More informationSMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationFPC connectors (0.3mm pitch) Front lock with FPC tabs
AYF31 For FPC FPC connectors (0.3mm pitch) Front lock with FPC tabs Y3FT Series FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes to the miniaturization
More informationPRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
More informationRG142-TNMNM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR. Regulatory Compliance/Certifications
RG142-TNMNM-3M Product Classification Product Series Product Type RG142 CNT Jumper with interface types and, 3 m RG142 Braided cable assembly General Specifications Body Style, Connector A Body Style,
More informationFor FPC. FPC connectors (0.3mm pitch) Back lock
0.9 For FPC FPC connectors (0.3mm pitch) Back lock AYF33 Y3B/Y3BW Series New Y3B Y3BW is added. FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) Back lock type and the slim body with a 3.15 mm depth
More informationN Male Connector Clamp/Solder Attachment for RG17, RG218, RG219
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationProduct Specification - LPS Connector Series
LPS Product Specification - LPS OVERVIEW The LPS products are solderable versions of those in the Neoconix LPM product series. Also developed for mobile devices and other space-constrained applications,
More information