2.54mm Pitch Bottom Entry Type Connector
|
|
|
- Christine Hancock
- 5 years ago
- Views:
Transcription
1 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. 2.54mm Pitch Bottom Entry Type Connector MDF Series Features 1. Board to Board Size Freely Settable The board to board size can be set at infinite stages, according to the header pin through type structure and the diverse header variation. The board to board size can be set at infinite stages. Board to Board size Freely settable 2. Integrity of Parts Mounted Surface The parts mounted surface on two boards aren't face each other, and can be oriented in the same direction. 3. Wide Variation Single-row product, double-row product, tin plated and gold plated products are lined up. In addition, the header to correspond to the board to board size are prepared. Concerning board to board size, other products can be provided, in addition to products in this catalog. Please contact HRS company as required. Applications Internal connection of telephone sets and OA/FA equipment, connection between IPM, IGBT and the board. A1
2 All non-rohs MDF products Series 2.54mm have been discontinued, Pitch or will Bottom be discontinued Entry soon. Type Please Connector check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Product Specifications Rating Current rating: 3A Operating Temperature Range: -30ç to +5ç(Note 1) Storage Temperature Range: -ç to +60ç (Note 2) Voltage rating: 250V AC Operating Humidity Range: 40% to 0% Storage Humidity Range: 40% to 0%(Note 2) Item Specification Condition 1. Insulation Resistance 00M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30m ohms max. 0mA 4. Single Insertion/Extraction Force MIN 0.4N(40gf), MAX 4.4N(450gf) Measured by the square steel pin with 0.635±0.002mm 5. Vibration No electrical discontinuity of 1µs or more Frequency: to 55 Hz, single amplitude of 0.5 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max. 96 hours at temperature of Insulation resistance: 500M ohms min. 40 ± 2ç and humidity of 90% to 95%. Temperature Cycle Contact resistance: 30m ohms max. (-55ç: 30 minutes, 5 to 35ç: minutes Insulation resistance: 00M ohms min. (-5ç: 30 minutes, 5 to 35ç: minutes) 5cycles. Durability Tin plating : 30 cycles Contact resistance: 30m ohms max. (Mating/un-mating) Gold plating : 50 cycles 9. Resistance to Soldering heat No deformation of components affecting performance. Flow: 260ç for seconds Manual soldering: 350ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Part Material Finish Remarks Receptacle Insulator Polyamide Black UL94V-0 Contact Phosphor bronze Tin plated or gold plated Pin Header Insulator PBT Main unit: Black/Locator: Gray UL94V-0 Contact Brass Tin plated or gold plated Ordering Information MDF q - * S DSA w e r t q Series Name : MDF w Number of contacts : 3 to 46 e Connector Type S : Single row receptacle D : Double row receptacle P : Single row pin header DP: Double row pin header r Contact Pitch : 2.54mm t Contact type DSA: Straight through hole DS : Right Angle through hole A2
3 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website MDF RoHS search Series 2.54mm at Pitch Bottom or contact Entry your Type Hirose Connector sales representative. Single Row Receptacle (56) :Gold plated Part Number CL No. Number of Contacts A B RoHS Part Number CL No. Number of Contacts A B RoHS MDF- 3S-2.54DSA(**) ** MDF-15S-2.54DSA(**) ** MDF- 5S-2.54DSA(**) ** 5.. MDF-S-2.54DSA(**) ** 3.1 MDF- 6S-2.54DSA(**) MDF- S-2.54DSA(**) MDF- S-2.54DSA(**) ** ** ** MDF-1S-2.54DSA(**) MDF-1S-2.54DSA(**) MDF-S-2.54DSA(**) ** ** ** MDF- 9S-2.54DSA(**) ** MDF-20S-2.54DSA(**) ** MDF-S-2.54DSA(**) **.6 MDF-21S-2.54DSA(**) ** MDF-11S-2.54DSA(**) MDF-S-2.54DSA(**) MDF-S-2.54DSA(**) ** ** ** MDF-S-2.54DSA(**) MDF-S-2.54DSA(**) MDF-S-2.54DSA(**) ** ** ** MDF-S-2.54DSA(**) ** MDF-25S-2.54DSA(**) ** Note: The quantity for delivery is determined per pack (0 pcs.). If needed, please order the products per pack. Double Row Receptacle Part Number MDF-D-2.54DSA(**) MDF-D-2.54DSA(**) MDF-D-2.54DSA(**) MDF-20D-2.54DSA(**) MDF-D-2.54DSA(**) MDF-D-2.54DSA(**) MDF-26D-2.54DSA(**) MDF-30D-2.54DSA(**) MDF-34D-2.54DSA(**) MDF-40D-2.54DSA(**) MDF-46D-2.54DSA(**) CL No ** ** ** ** ** ** ** ** ** ** ** Number of Contacts A B RoHS (Note 2) (56) :Gold plated MDF-4D-2.54DSA(**) ** Note 1: A quantity for delivery is determined per pack (0 pcs.). If needed, please order the products per pack. Note 2: The MDF series 2-row plating specification is different from the single-row plating specification. No-specification indicates the gold plating, and (01) indicates the tin plating. A3
![Single Row Straight Pin Header (01) :Gold plated Board Through-hole Diameter: Ø1.0+0 +0.1 [without locator] [with locator] MDF(Board to Board Size: 2.54 to 5.5mm) MDFB (Board to Board Size 2.](/docs-images/96/127052346/images/4-1.jpg "54 to mm) Part Number CL No. Number of Contacts A B C RoHS Part Number CL No. Number of Contacts A B C RoHS MDF- 3P-2.54DSA(**) 54-00-1-** 3.62 5.0 MDFB- 3P-2.54DSA(**) 54-0304-0-** 3.62 5.0.46 MDF- 5P-2.")
4 All non-rohs MDF products Series 2.54mm have been discontinued, Pitch or will Bottom be discontinued Entry soon. Type Please Connector check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Single Row Straight Pin Header (01) :Gold plated Board Through-hole Diameter: Ø [without locator] [with locator] MDF(Board to Board Size: 2.54 to 5.5mm) MDFB (Board to Board Size 2.54 to mm) Part Number CL No. Number of Contacts A B C RoHS Part Number CL No. Number of Contacts A B C RoHS MDF- 3P-2.54DSA(**) ** MDFB- 3P-2.54DSA(**) ** MDF- 5P-2.54DSA(**) ** 5.. MDFB- 5P-2.54DSA(**) ** MDF- 6P-2.54DSA(**) ** MDFB- 6P-2.54DSA(**) ** MDF- P-2.54DSA(**) MDF- P-2.54DSA(**) MDF- 9P-2.54DSA(**) ** ** ** MDFB- P-2.54DSA(**) MDFB- P-2.54DSA(**) MDFB- 9P-2.54DSA(**) ** ** ** MDF-P-2.54DSA(**) **.6 MDFB-P-2.54DSA(**) **.6.46 MDF-11P-2.54DSA(**) ** MDFB-11P-2.54DSA(**) ** MDF-P-2.54DSA(**) MDF-P-2.54DSA(**) ** ** MDFB-P-2.54DSA(**) MDFB-P-2.54DSA(**) ** ** MDF-P-2.54DSA(**) ** MDFB-P-2.54DSA(**) **.46 MDF-15P-2.54DSA(**) ** MDFB-15P-2.54DSA(**) ** MDF-P-2.54DSA(**) ** 3.1 MDFB-P-2.54DSA(**) ** NDF-1P-2.54DSA(**) MDF-1P-2.54DSA(**) MDF-P-2.54DSA(**) ** ** ** MDFB-1P-2.54DSA(**) MSDB-1P-2.54DSA(**) MDFB-P-2.54DSA(**) ** ** ** MDF-20P-2.54DSA(**) ** MDFB-20P-2.54DSA(**) ** MDF-21P-2.54DSA(**) ** MDFB-21P-2.54DSA(**) ** MDF-P-2.54DSA(**) MDF-P-2.54DSA(**) MDF-P-2.54DSA(**) ** ** ** MDFB-P-2.54DSA(**) MDFB-P-2.54DSA(**) MDFB-P-2.54DSA(**) ** ** ** MDF-25P-2.54DSA(**) ** MDFB-25P-2.54DSA(**) ** Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used. Note 2: The quantity for delivery is determined per pack (0 pcs.). If needed, please order the products per pack. A4
5 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website MDF RoHS search Series 2.54mm at Pitch Bottom or contact Entry your Type Hirose Connector sales representative. MDFP (Board to Board Size 2.54 to mm) Part Number MDFP- 3P-2.54DSA(**) MDFP- 5P-2.54DSA(**) MDFP- 6P-2.54DSA(**) MDFP- P-2.54DSA(**) MDFP- P-2.54DSA(**) MDFP- 9P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-11P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-15P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-1P-2.54DSA(**) MDFP-1P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-20P-2.54DSA(**) MDFP-21P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-P-2.54DSA(**) MDFP-P-2.54DSA(**) CL No ** ** ** ** ** ** Number of Contacts A B MDFC (Board to Board Size 5.0 to 15mm,with Locator) C RoHS Part Number.5 MDFC- 3P-2.54DSA(**).5 MDFC- 5P-2.54DSA(**).5 MDFC- P-2.54DSA(**).5 MDFC- P-2.54DSA(**).5 MDFC- 9P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-11P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-15P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-1P-2.54DSA(**).5 MDFC-1P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-20P-2.54DSA(**).5 MDFC-21P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-P-2.54DSA(**).5 MDFC-25P-2.54DSA(**) CL No ** ** ** ** ** ** ** ** ** ** Number of Contacts A B C RoHS MDFP-25P-2.54DSA(**) ** Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used. Note 2: A quantity for delivery is determined per pack (0 pcs.). If needed, please order the products per pack. Note 3: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production according to your demand. Please contact HRS company, as required. A5
6 All non-rohs MDF products Series 2.54mm have been discontinued, Pitch or will Bottom be discontinued Entry soon. Type Please Connector check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. Single-Row Right Angle Pin Header +0.1 Board Through-hole Diameter: Ø (56) :Gold plated Part Number CL No. Number of Contacts A B RoHS Part Number CL No. Number of Contacts A B RoHS MDF- 5P-2.54DS(**) MDF- 6P-2.54DS(**) MDF- P-2.54DS(**) MDF- P-2.54DS(**) ** ** ** ** MDF-P-2.54DS(**) MDF-1P-2.54DS(**) MDF-1P-2.54DS(**) MDF-P-2.54DS(**) ** ** ** ** MDF- 9P-2.54DS(**) ** MDF-20P-2.54DS(**) ** MDF-P-2.54DS(**) **.6 MDF-21P-2.54DS(**) ** MDF-11P-2.54DS(**) MDF-P-2.54DS(**) MDF-P-2.54DS(**) MDF-P-2.54DS(**) MDF-15P-2.54DS(**) ** ** ** ** ** MDF-P-2.54DS(**) MDF-P-2.54DS(**) MDF-P-2.54DS(**) MDF-25P-2.54DS(**) ** ** ** ** Note: A quantity for delivery is determined per pack (0 pcs.). If needed, please order the products per pack. BApplication Pattern and PCB mounting pattern When the single-row straight pin header is used When the header with locator is used The locator moves as the connector is inserted. When the board to board size is set to MAX When the right angle pin header is used To separate clearance between the boards, the operation limit t is defined as the state where the male pin has passed through the receptacle. A6
7 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website MDF RoHS search Series 2.54mm at Pitch Bottom or contact Entry your Type Hirose Connector sales representative. Double-Row Straight Pin Header +0.1 Board Through-hole Diameter: Ø Blank :Gold plated MDF (Board to Board Size: 2.54 to 5.5mm) Part Number CL No. MDF-DP-2.54DSA(**) ** MDF-DP-2.54DSA(**) ** MDF-DP-2.54DSA(**) ** MDF-20DP-2.54DSA(**) ** MDF-DP-2.54DSA(**) ** MDF-DP-2.54DSA(**) ** MDF-26DP-2.54DSA(**) ** MDF-30DP-2.54DSA(**) ** MDF-34DP-2.54DSA(**) ** MDF-40DP-2.54DSA(**) ** MDF-46DP-2.54DSA(**) ** Number of Contacts A B Note 1: The board to board size in the above table represents the state where the 1.6mm thickness board is used. Note 2: A quantity for delivery is determined per pack (0 pcs.). If needed, please order the products per pack. Note 3: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production according to your demand. Please contact HRS company, as required. BApplication Pattern and PCB mounting pattern When the double-row straight pin header is used MDFP (Board to Board Size: 2.54 to mm) C RoHS Part Number CL No. MDFP-DP-2.54DSA(**) MDFP-DP-2.54DSA(**) MDFP-DP-2.54DSA(**) MDFP-20DP-2.54DSA(**) MDFP-DP-2.54DSA(**) MDFP-DP-2.54DSA(**) MDFP-26DP-2.54DSA(**) MDFP-30DP-2.54DSA(**) MDFP-34DP-2.54DSA(**) MDFP-40DP-2.54DSA(**) MDFP-46DP-2.54DSA(**) ** ** ** ** ** ** ** Number of Contacts A B RoHS C BPrecautions 1. Recommended Soldering Condition Flow Condition by Automatic Soldering Unit Soldering temperature: 255±5ç, Soldering time: within seconds Manual Soldering Condition Soldering iron temperature: 340±ç, Soldering time: within 3 seconds 2. Board Masking If the automatic soldering unit is used, block the pin header through-hole on the receptacle mounted board with the masking tape, etc., and prevent the flux pervasion. In addition, if much flux is adhered so as to affect the contact, please be sure to clean the board. 3. Cleaning Condition Refer to Nylon Connector Use Hand book. 4. Cautions It is impossible to fix the board to the board by the connector only. Please take actions to fix the board without using the connector. If the board deformation could occur due to vibration, please use the gold plating. Don't use the connector as the top entry. A
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
Coaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Features 1. High current capacity Capable of going to a max. of 45A when using AWG
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
Sep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Non-reflective Terminations (BNC) BNC-TM Series BNC-TMP-05(43) BNC-TMJ-05(42) BNC-TMP-05-2(42) BNC-TMJ-05-2(42) BNC-TMP-05-1(41) BNC-TMJ-05-1(41) BNC-TMP-05(75)(40) BNC-TMJ-05(75)(40) BNC-TMP-1(42) Product
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
Couplers with Connectors (H Type)
Couplers with Connectors (H Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HDH Series HDH-83GHD HDH-3GH(4) HDH-93GHD(4) Product Specifications Ratings Frequency range (Note) Characteristic
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: J PRODUCT
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
PRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Mar11 Rev J
Product Specification 108-1051 11Mar11 Rev J System, Connector/Header, MTA 156 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) MTA
Miniature Interface Coaxial Switch, DC to 10 GHz
Miniature Interface Coaxial Switch, DC to 10 GHz MS-162B Series Features 1. Wide frequency range Applicable frequencies range from DC to 10 GHz. 2. Low insertion loss 0.15 db MAX (DC to 2 GHz) 0.2 db MAX
TEST SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND MATE INTERFACE (BMI) (WIRE TO PCB AND WIRE TO WIRE)
SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND (WIRE TO PCB AND WIRE TO WIRE) 1.0 SCOPE This specification covers the 4.20 mm (.165 inch) centerline connector series terminated with 18 to 24
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
Plug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Miniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions.. Features. Small high density Outer diameters - plugs (max): mm :, and positions mm : 2, and positions 2. Simple push-in/ pull-out mating
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
3 db 90 Card Couplers
3 db 90 Card Couplers HD-M Series HD-0053M3-IH HD-0195M3-DH HD-0195M3-DH-1 HD-0900M3-CH-1 HD-0620M3-EH HD-1700M3-FH HD-3900M3-BH HD-0313M3-FH HD-2100M3-CH HD-1800M3-CH HD-3200M3-BH HD-6150M3-AH Features
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
SSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB