.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
|
|
- Felix Bates
- 5 years ago
- Views:
Transcription
1 dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single, Dual and Triple row, they are offered in Straight, Right ngle, SMT, ottom Entry and Pass Through PC mounting styles. Each type has a specially designed contact system which uses a wiping mating action and produces a high normal force connection with gold, tin or selective gold plating. ll are available with Standard or Hi-Temp Thermoplastic insulators. Our SMT offering is available with optional pick and place pads and tape & reel packaging. " RECEPTCLE STRIPS SINGLE ND DUL ROW " CENTERLINE FETURES: road range of sizes and profiles Contact systems with high normal force Choice of contact plating SMT pick & place option Optional Tape & reel packaging ORDERING INFORMTION RS1 12 G MTING CONNECTORS: dam Tech PH series " pitch pin headers and all industry standard pin headers with a.025" (0.64mm] square pin. SPECIFICTIONS: Material: Insulator: PT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: lack Contacts: Phosphor ronze Contact Plating: G = Gold flash (30u optional) over nickel underplate overall SG = Gold flash (30u optional) over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V C max. Current rating: 3 mps max. Contact resistance: 20 mω max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Insertion force: lbs per contact max. Withdrawal force: lbs per contact min. Temperature Rating: Operating temperature: -40 C to +105 C SERIES INDICTOR RS1 = Single row vertical mount receptacle RS1R = Single row right angle mount receptacle RS2 = Dual row vertical mount receptacle RS2R = Dual row right angle mount receptacle RS = Dual row straight PC mount with polarization bump and keyed corner contacts RSR = Dual row right angle PC mount with polarization bump and keyed corner contacts RSE1 = Single row elevated recepticle RSE2 = Dual row elevated recepticle RSM1 = Single row surface mount RSM2 = Dual row surface mount PLTING G = Gold plated T = Tin plated SG = Gold plating in contact area, Tin Plated solder tails POSITIONS Single row: 1 thru 40 Dual row: 2 thru 80 PCKGING: nti-esd plastic trays (Tape and Reel optional for SMT option) SFETY GENCY PPROVLS: UL Recognized & CS Certified, File no. E Pb RoHS COMPLINT 2002 / 95 / EC HI-TEMP INSULTOR V I L L E C E US OPTIONS: dd designator(s) to end of part number SMT = SMT Dual row with Hi-Temp insulator SMT- = SMT Single Row Type with Hi-Temp insulator SMT- = SMT Single Row Type with Hi-Temp insulator 30 = 30 µin gold plating in contact area P = Optional guide peg on SMT version HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260 C (dd this option for thru-hole products only. ll SMT products are manufactured with Hi-Temp insulators) Rahway venue Union, New Jersey T: F:
2 dam Technologies, Inc. " RECEPTCLE STRIPS ORDERING INFORmTION RECEPTCLE STRIPS FOUR SIDED CONTCT PGE 309, 310 & 314 RS1 26 G RECEPTCLE STRIPS LOW PROFILE PGE 313 RS1L 34 G SERIES INDICTOR RS1 = Single row, vertical mount 4-sided contact receptacle strip RS2 = Dual row, vertical mount 4-sided contact receptacle strip RS1R = Single row, right angle mount, 3-sided contact receptacle strip RS2R = Dual row, right angle mount, 3-sided contact receptacle strip POSITIONS Single row: 2 thru 40 Dual row: 4 thru 80 PLTING G = Gold plated T = Tin plated SG = Gold plated contact area, tin plated solder tails SERIES INDICTOR RS1L = Single row,.224" body height RS2L = Dual row,.224" body height POSITIONS Single row: 2 thru 40 Dual row : 4 thru 80 PLTING G = Gold plated T = Tin plated RECEPTCLE STRIPS OTTOM, PSS THROUGH OR DUL ENTRY PGE 307, 315 & 316 RECEPTCLE STRIPS VERY LOW PROFILE PGE 308 RS2E 40 G RSVL 2 10 G SERIES INDICTOR RS1E = Single row, vertical mount, bottom, pass through or dual entry receptacle strip RS2E = Dual row, vertical mount, bottom, pass through or dual entry receptacle strip RS2E- = Dual row, with single sided footprint, vertical mount, bottom, pass through or dual entry receptacle strip SOLDER TIL FOOTPRINT = " x.150" = " x.200" C = " x.300" lank = Single row PLTING G = Gold plated POSITIONS Single Row: 2 thru 40 Dual Row: 4 Thru 80 SERIES INDICTOR RSVL = Vertical Mount, very low profile receptacle strip PROFILE / NO. OF ROWS 1 = Single row,.138" body height 1 = Single row,.205" body height 2 = Dual row,.138" body height 2 = Dual row,.205" body height PLTING G = Gold plated T = Tin plated POSITIONS Single Row: 2 Thru 36 Dual Row: 4 Thru 72 OPTIONS: dd designator(s) to end of part number = Type PC Layout = Type PC Layout 909 Rahway venue Union, New Jersey T: F:
3 dam Technologies, Inc. " RECEPTCLE STRIPS.138" &.205" height SINGLE ND DUL ROW Ordering Information pg. 307 RSVL-1 RSVL-1-18-G.016x.022 [0.40x0.55].138 [3.50].130 [3.30].016 [0.40] = X No. of Positions = X No. of Spaces Recommended PC Layout RSVL [5.50] RSVL-2-38-G.016x.022 [0.40x0.55].138 [3.50].130 [3.30].016 [0.40] = X No. of Positions Per Row = X No. of Spaces Recommended PC Layout RSVL-1 RSVL-1-18-G.016x.022 [0.40x0.55].205 [5.20].130 [3.30].016 [0.40] = X No. of Positions = X No. of Spaces Recommended PC Layout RSVL [5.50] RSVL-2-36-G.016x.022 [0.40x0.55].205 [5.20].130 [3.30] = X No. of Positions Per Row = X No. of Spaces.016 [0.40] Recommended PC Layout Rahway venue Union, New Jersey T: F:
4 dam Technologies, Inc. " RECEPTCLE STRIPS.335" height, " CENTERLINE Ordering Information pg. 306 RS1.094 [2.40] RS1-12-G.335 [8.50].024x.016 [0.60x0.40] = X No. of Positions [0.50] = X No. of Spaces Recommended PC Layout RS1R.094 [2.40] RS1R-09-G.335 [8.50].063 [1.60] = X No. of Positions [0.50] = X No. of Spaces.024x.016 [0.60x0.40].114 [2.90] Recommended PC Layout RS1R.125 [3.18].028X.010 [0.70X0.25] RS1R-13-G.138 [3.50] ø.040 [1.02].315 [8.00].310 [7.87].310 [7.87] = X No. of Positions = X No. of Spaces Recommended PC Layout 909 Rahway venue Union, New Jersey T: F:
5 dam Technologies, Inc. " RECEPTCLE STRIPS.335" height, " CENTERLINE Ordering Information pg. 306 RS2 RS2-24-G.335 [8.50].024 x.016 [0.60 x 0.40] = x No. of Positions per row [0.50] = x No. of Spaces Recommended PC Layout RS2R RS2R-14-G.335 [8.50].024 x.016 [0.60 x 0.40] = x No. of Positions per row [0.50] = x No. of Spaces.063 [1.60].114 [2.90] Recommended PC Layout RS2R.174 [4.43].230 [5.85].028 x.010 [.700 x.250] RS2R-28-G.138 [3.50] ø.040 [1.02].315 [8.00].310 [7.87].310 [7.87] = x No. of Positions per row = x No. of Spaces Recommended PC Layout Rahway venue Union, New Jersey T: F:
6 dam Technologies, Inc. " RECEPTCLE STRIPS SmT.283" height, " CENTERLINE Ordering Information pg. 306 RSM1.039 [1.00] TYPE.205 [5.20] RSM1-10-SG-SMT- TYPE.075 [1.90] TYPE Recommended PC Layout.098 [2.50].283 [7.20].295 [7.50].075 [1.90].020 x.010 [0.50 x 0.25].165 [4.20].205 [5.20] TYPE.075 [1.90] = x No. of Positions = x No. of Spaces Recommended PC Layout RSM2 RSM2-20-SG-SMT.283 [7.20].295 [7.50].020 x.010 [0.50 x 0.25] Optional - Guide Peg.264 [6.70].303 [7.70].154 [3.90] = x No. of Positions per row = x No. of Spaces x.075 [1.00 x 1.90] Recommended PC Layout ø.047 [1.20] 909 Rahway venue Union, New Jersey T: F:
7 dam Technologies, Inc. " RECEPTCLE STRIPS.335" height WITh POLRIzING UmP Ordering Information pg. 306 RS.146 [3.70] RS-36-G.275 [7.00].236 [6.00].335 [8.50].126 [3.20].031 x.016 [0.80 x 0.40] = X No. of Positions [7.62] = X No. of Spaces ø.040 [1.02] Recommended PC Layout RSR.146 [3.70].275 [7.00].236 [6.00] RSR-36-G.335 [8.50].063 [1.60].031 x.016 [0.80 x 0.40].126 [3.20] Recommended PC Layout = x No. of Positions [7.62] = x No. of Spaces Rahway venue Union, New Jersey T: F:
8 dam Technologies, Inc. " RECEPTCLE STRIPS.224" height LOW PROFILE Ordering Information pg. 307 RS1L.094 [2.40] RS1L RS1L-10-G.094 [2.40].224 [5.70].110 [2.80].028 x.016 [0.70 x 0.40] = x No. of Positions = x No. of Spaces Recommended PC Layout RS2L RS2L RS2L-20-G.224 [5.70].028 x.016 [0.70 x 0.40].110 [2.80] = x No. of Positions per row = x No. of Spaces Recommended PC Layout 909 Rahway venue Union, New Jersey T: F:
9 dam Technologies, Inc. " RECEPTCLE STRIPS.260" height FOUR SIDED CONTCT Ordering Information pg. 307 RS1.138 [3.50] RS1-10-SG RS1.267 [6.80].125 [3.17].026x.010 [0.65x0.25] = X No. of Positions = X No. of Spaces Recommended PC Layout RS2.230 [5.84] RS2 RS2-20-SG.267 [6.80].125 [3.17].026x.010 [.65x.25] = X No. of Positions per row = X No. of Spaces Recommended PC Layout Rahway venue Union, New Jersey T: F:
10 dam Technologies, Inc. " RECEPTCLE STRIPS OTTOm, PSS ThRU & DUL ENTRY Ordering Information pg. 307 RS1E-/ PIN 1 TYPE PIN 1 TYPE RS1E--10-SG-.200 [5.08] = X No. of Positions = X No. of Spaces ø.047 [1.20] ø.047 [1.20].200 [5.08] [ [5.08] [2.54 TYPE TYPE Recommended PC Layouts RS1E = X No. of Positions = X No. of Spaces RS1E-10-SG.031x.010 [0.81x0.25] ø.035 [0.89] Recommended PC Layout 909 Rahway venue Union, New Jersey T: F:
11 dam Technologies, Inc. " RECEPTCLE STRIPS TOP, OTTOm & PSS ThRU ENTRY Ordering Information pg. 307 RS2E- Top EnTRy.200 [5.08] RS2E--28-G = X No. of Positions per row = X No. of Spaces.031x.010 [0.80x0.25].150 [3.81] SINGLE ROW CONFIGURTION LSO VILLE.150 [3.81] Recommended PC Layout RS2E- Top or ottom EnTRy.200 [5.08] RS2E--26-G = X No. of Positions per row = X No. of Spaces.031x.010 [0.80x0.25].200 [5.08] SINGLE ROW CONFIGURTION LSO VILLE.200 [5.08] ø.037 [.95] Recommended PC Layout RS2E-C Top or ottom EnTRy.200 [5.08] RS2E-C-30-G = X No. of Positions per row = X No. of Spaces.031x.010 [0.80x0.25].300 [7.62] SINGLE ROW CONFIGURTION LSO VILLE ø.047 [1.20] Recommended PC Layout Rahway venue Union, New Jersey T: F:
12 dam Technologies, Inc. " RECEPTCLE STRIPS ELEvTED SOCkETS " CENTERLINE RSE1 RSE SG-3 Recommended PC Layout RSE2 RSE SG-3 Recommended PC Layout 1 Insulator 2 Insulators 3 Insulators ORDERING INFORMTION RSE SG 1 SERIES INDICTOR RSE1 = Single row, vertical elevated socket strip RSE2 = Dual row, vertical elevated socket strip POSITIONS Single Row 01 thru 40 Dual Row 02 thru 80 HEIGHT 1 =.433 [11.00] 2 =.531 [13.50] 3 =.630 [16.00] PIN LENGTH Dim. D See chart Dim.D PLTING SG = Selective Gold Plating in contact area, Tin Plated tails T = Tin Plated PRT NUMER INSULTORS DIM. C DIM. D RSEX-1-XX-SG [11.00] RSEX-1-XX-SG [11.00].315 [8.00] RSEX-1-XX-SG [11.00].448 [11.40] RSEX-2-XX-SG [13.50].216 [5.50] RSEX-3-XX-SG [16.12] RSEX-3-XX-SG [16.12].252 [6.40] *Replace X with 1 for single row or 2 for double row. *Replace XX with total number of positions. 909 Rahway venue Union, New Jersey T: F:
13 Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: DM TECH: RS1-03-G RS1-05-G RS1-08-G RS1-20-G RS2-04-G RS2-20-G RS2-40-G
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More informationTERMINAL BLOCKS BULkhEAD & PC BOARD mount TB & TD SERIES
dam Technologies, Inc. TERMINL LOCKS ULkhED & PC ORD mount T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and
More information0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
More informationHEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
More informationlif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
More informationTERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
More informationTERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More informationM20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
More informationPRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationCOMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
More informationConnector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More informationPoke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationBy using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
More informationMaterial: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationCONTACTING - MODULES TEST SOLUTIONS ENGINEERED TO CONNECT
ENGINEERED TO CONNECT CONTACTING - MODULES TEST SOLUTIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 CONTACTING - MODULES QSEVEN
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More informationInsertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
More information3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
More information2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More informationD Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
More informationPoke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More informationELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
More informationCompact Coaxial Connectors Compatible with IEC (Type SMB) Standard SMT Type SMB Connector
COMPONENTS PRODUCT INFORMATION NEW Compact Coaxial Connectors Compatible with IEC60169-10 (Type SMB) Standard SMT Type SMB Connector CONNECTOR MB-0156-3 October 2010 SMT Type SMB Connector P/N No.: SMBR003D00
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationITT Cannon Combination D-Sub Connectors
PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION
More informationEuroMag Series PCB Mount Terminal Blocks. EM3123 Series Euro-Mag Terminal Blocks 3.50 Centers; Modular. Part Numbering System
EuroMag PCB Mount Terminal Blocks EM.0 Centers; Modular Rating: A, 00V Center Spacing: 0. (.0mm) Wire Range: #1- AWG Housing Material: Black Polyamide Type /, V0 Screw Size: M.0 Chromate Steel Operating
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationDatamate Connectors Female Vertical PC Tail
Female Vertical PC Polarised mouldings. For ritish Standard versions see pages 14 to 15. Dummy contacts for additional polarisation use order code M80-023. Mates with male connectors on pages 21 to 25.
More informationXA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationCLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationSurface Mount Connectors
Surface Mount Connectors 3 As the industry s first surfacemountable connectors to be supplied on a continuous reel, our surface mount connectors are designed to be used as part of Zierick s Surf-Shooter
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationWIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationConnector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationSMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More informationStandard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
More information.062 [1.57] Commercial Pin and Socket Connectors
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More informationPRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationIDC Plug: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ENVIRONMENTAL MECHANICAL ELECTRICAL HOW TO ORDER 00X
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationPC BOARD MOUNTING CONNECTORS
PC BOARD MOUNTING CONNECTORS 720 SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp connector) are designed for a wide range of uses, and come in many shapes, two contact arrangements
More informationPRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
More informationAirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
More informationOperating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
More informationDiscrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationSSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationDetailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More informationSMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationYL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More informationD-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
More informationINSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
More informationMaximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
More informationPC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS)
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp type connectors) are designed for a wide range of uses. 1-row and 2-row types are available to allow various
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
More information