Rated current. Dielectric withstanding voltage

Size: px

Start display at page:

Download "Rated current. Dielectric withstanding voltage"

Morris Carroll
6 years ago
Views:

1 mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the purpose of saving extra space on printed circuit boards. Features Long-life design allowing up to 5,000 mating cycles Low profile with overall height of 5mm from the PC surface Sequential structure allowing up to two stacked connections One-touch-lock-type and detachable / re-attachable housing EMI/ESD-shielded and over-molded type metal housing IDC type connector on the cable end allows simultaneous termination Principal Applications Portable information terminals, smaller-sized office automation equipment, and their peripherals Electrical Characteristics Rated voltage Rated current Insulation resistance Dielectric withstanding voltage Contact resistance 125V AC (r.m.s.) 0.5 A Over 1000 megohms at 250V DC 350V AC (r.m.s.) 70 milliohms or less Document Disclaimer When placing orders with us, minimum order quantities are set for every product. e sure to contact us before starting preliminary design of PCs using our connectors. The specifications and information shown in the catalog are subject to change without notice.

2 Reflow temperature profile (for reference purposes) Flow temperature profile (for reference purposes) 5sec 250 C (Peak) 260±5 C 220 C 150~180 C (Preheating period) 90~120sec (Full heating period) 30~60sec 100~130 C 30~60sec The reflow temperature profile shown in this drawing is for reference purposes. This profile depends on requirements such as reflow equipment, soldering paste, and PC size. Thus, this profile may not meet with your specific situation. Please evaluate your PC-mounting soldering and set your own reflow temperature profile. ΩApplicable products HDR-EA( )LMYPG1-( )( )+ HDR-EA( )LFYPG1-( )( )+ The flow temperature profile as shown above is for reference purposes. This profile depends on requirements such as the PC size. Thus, this profile may not meet with your specific situation. Please evaluate your PC-mounting soldering and set your own flow temperature profile. ΩApplicable products HDR-EC( )FDT( )-( )+ HDR-EC( )LFDT( )-( )+ The profile shown in this drawing is applicable only for those products shown above. The profile shown in this drawing is applicable only for those products shown above.

Product List IDC type male connector for cable HDR-E( )MAG1+ Soldering type male connector for cable HDR-E( )MSG1+ Straddle SMT type male connector

type female connector for PC HDR-EC( )FDT( )-( )+ Right-angle through hole type female connector for PC HDR-EC( )LFDT( )-( )+ A-10HDR HDR series.

3 Product List IDC type male connector for cable HDR-E( )MAG1+ Soldering type male connector for cable HDR-E( )MSG1+ Straddle SMT type male connector for PC HDR-E50MT( )+ Right-angle SMT type male connector for PC HDR-EA( )LMYPG1-( )( )+ A-6HDR HDR series...4 A-7HDR HDR series...5 A-8HDR HDR series...6 A-9HDR HDR series...7 IDC type female connector for cable HDR-E( )FAG1+ Right-angle SMT type female connector for PC HDR-EA( )LFYPG1-( )( )+ Straight through hole type female connector for PC HDR-EC( )FDT( )-( )+ Right-angle through hole type female connector for PC HDR-EC( )LFDT( )-( )+ A-10HDR HDR series...8 A-11HDR HDR series...9 A-12HDR HDR series...10 A-13HDR HDR series...11 EMI-filtered vertical plastic housing for standard and thin cable HDR-E( )LP( )( )-( ) A-14HDR HDR series...12 EMI-filtered screw-lock vertical type plastic housing HDR-E26LPH A-15HDR HDR series...13

4 mm pitch connector IDC type male connector for cable HDR- E( )MAG1+ For cable IDC EMI shielded HDR- E ( ) M A G1+ ➀ ➁ ➂ ➃ ➄ ➅ ➁ E: With metal shell ➂ No. of contacts: 14, 26 or 50 ➃ Type of contact M: IDC type, Male ➄ Compatible cable A: AWG#30 (7/0.1), dia. 0.58mm ➅ Contact plating G1: 0.76μm or more Gold plate A ➀ LAST POS. C 15 ➂ ➁ contacts contacts contacts ➃ ➄ ➀ Contacts ➁ Shell ➂ Insulator ➃ Spacer ➄ Cable housing Dimensions Part No. A C HDR-E14MAG1+ HDR-E26MAG1+ HDR-E50MAG =4.8 12=9.6 24= Mating connector: HDR series SMT type or through hole type female connector For use with housings: HDR series upright housing Required tools: Termination tool: FHAT-0029, IDC tool: FHPT-923, Hand presser: MFC-K1 (Refer to page Tool-10) Through hole SMT Press-in IDC Soldering Crimping Wire wrapping Others

5 Soldering type male connector for cable HDR-E( )MSG1+ mm pitch connector For cable Soldering EMI shielded HDR- E ( ) M S G1+ ➀ ➁ ➂ ➃ ➄ ➅ ➁ E: With metal shell ➂ No. of contacts: 26 or 50 ➃ Male ➄ Soldering ➅ Contact plating G1: 0.76μm or more Gold plate C / ± A C /2 5.4 ± ±0.15 / /2+1 C 26-contact connector Dimensions Part No. A C HDR-E26MSG1+ HDR-E50MSG =9.6 24=19.2 Mating connector: HDR series female connector For use with housings: HDR-E( )LPH Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole

6 Straddle SMT type male connector for PC HDR-E50MT( )+ mm pitch connector For PC Straddle SMT HDR- E 50 MT ( )+ ➀ ➁ ➂ ➃ ➁ No. of contacts: 50 ➂ Type of contact MT: Straddle SMT type, male ➃ PC thickness lank: 0.4 mm A : mm 24=19.2 ➀ POS.#25 ➁ ➂ =19.2 POS.# POS.# POS.# ➀ Contacts ➁ Insulator ➂ Shell POS.#26 POS.#50 2-C ± ±0.03 ± ± ± ±0.1 POS.#25 POS.#50 POS.#26 2-C ±0.05 ± =19.2 ±0.1 24=19.2 ±0.1 Prohibited area for mounting parts Recommended PC layout Mating connector: HDR series SMT type female connector Through hole SMT Press-in IDC Soldering Crimping Wire wrapping Others

7 Right-angle SMT type male connector for PC HDR-EA( )LMYPG1- ( )( )+ mm pitch connector For PC Right-angle SMT HDR- EA ( ) LMY P G1- ( ) ( )+ ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➁ Contact pitch: mm ➅ Lock screw lank : None ➂ No. of contacts: 14 or 26 SL : Provided ➃ Type of contact LMY: Right-angle SMT type, male ➄ Contact plating G1: 0.76 μm or more Gold plate ➆ Length of lock screw E: 6.6 (standard) K: 3.3 (for HDR-E ( ) LPA-LS) Compatible with -to- and -to-c ➃ ➀ 1.7 A C ➁ ➇ ➂ / ➆ ➄ 3.7 /2 1 D 15 ø1.1 ø1.7 E ➀ Insulator A ➁ Shell ➂ Contacts ➃ Insulator ➄ Square nuts ➅ Hold down ➆ Hex nuts ➇ Lock screw REF. 6.7 /2 1 3 ➅ ~0.25 F /2 6.6 /2+1 Dimensions Part No. A C HDR-EA14LMYPG1-( )( )+ HDR-EA26LMYPG1-( )( )+ 2-ø2.3 ± Recommended PC layout ± F ±0.05 E ±0.1 2-ø1.8 ±0.1 3 ±0.15 ±0.1 G ±0.1 3 ± ± /2 6 ± ± ± D E F G : PAD Mating connector: HDR series IDC type or solder type female cable connector For use with housing: -SLE: HDR series vertical housing -SLK: HDR series vertical housing -LS, -LSA Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole

8 IDC type female connector for cable HDR-E( )FAG1+ HDR- E ( )F A G1+ ➀ ➁ ➂ ➃ ➄ ➅ ➁ E: With metal shell ➂ No. of contacts: 14 or 26 ➃ Type of contact F: IDC type, female mm pitch connector For cable IDC EMI shielded ➄ Compatible cable A: AWG#30 (7/0.1), dia mm ➅ Contact plating G1: 0.76 μm or more Gold plate A /2 5.4 C 15 / ➂ ➀ Contacts ➁ Insulator ➂ Shell ➃ Spacer ➄ Cable housing ➀ ➁ ➃ ➄ Dimensions Part No. A C HDR-E14FAG1+ HDR-E26FAG Mating connector: HDR series SMT type male connector For use with housings: HDR series vertical housing Required tools: Termination tool: FHAT-0029, IDC tool: FHPT-923, Hand presser: MFC-K1 (Refer to page Tool-10) Through hole SMT Press-in IDC Soldering Crimping Wire wrapping Others

9 Right-angle SMT type female connector for PC HDR-EA( )LFYPG1-( )( )+ mm pitch connector For PC Right-angle SMT HDR- EA ( ) LFY P G1- ( ) ( )+ ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➁ Contact pitch: mm ➅ Lock screw lank : None ➂ No. of contacts: 14 or 26 ➃ Type of contact LFY: Right-angle SMT type, female SL : Provided ➄ Contact plating G1: 0.76 μm or more Gold plate ➆ Length of lock screw E: 6.6 (standard) K: 3.3 (for HDR-E ( ) LPA-LS) Compatible with -to- and -to-c 1.7 ➃ ➀ ➆ ➄ /2 A C ➁ ➇ 5 ➂ 2.5 D 15 /2+1 ø1.1 ø REF ➅ /2 2-ø2.3 ±0.05 F ±0.05 ± ±0.03 /2+1 ± ± ± ➀ Insulator A ➁ Shell ➂ Contacts ➃ Insulator ➄ Square nuts ➅ Hold down ➆ Hex nuts ➇ Lock screw 1.6 / ~0.25 F /2+1 Dimensions Part No. A C HDR-EA14LFYPG1-( )( )+ HDR-EA26LFYPG1-( )( ) ±0.1 2-ø1.8 ±0.1 E ±0.1 ± G Recommended PC layout ±0.1 ±0.15 D E F G : PAD Mating connector: HDR series IDC or solder type male cable connector For use with housing: -SLE: HDR series vertical housing -SLK: HDR series vertical housing -LS, -LSA Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole

10 Straight through hole type female connector for PC HDR-EC( )FDT( )-( )+ mm pitch connector For PC Straight Through hole EMI shielded HDR- EC ( ) FD T ( )- ( )+ ➀ ➁ ➂ ➃ ➄ ➅ ➅ Lock screw ➁ No. of contacts: 14 or 26 lank: None ➂ Type of contact SL : Provided FD: Straight through hole type, female (Panel thickness: 1.12 mm) ➃ With ground contact ➄ Contact plating G2: Min μm Gold plate 11.5 ±0.3 6 ±0.15 E D ± ± ± ± ± ±0.03 ø0.65 ±0.05 ±0.03 E ±0.05 ±0.05 POS.#2 ø1 ±0.05 (PAD) (PAD) 2-ø2MAX. 2-ø1.2 ± ø1.75 ± ±0.3 A ±0.2 F C (n/2-1)= POS.#2 M ± R ± D ±0.05 Recommended PC layout R1.1 X ± ±0.1 Y ±0.1 ➀ Insulator ➁ Contacts ➂ Shell ➃ Lock screws ➄ oard lock pin Recommended panel cut-out dimensions Dimensions Part No. A C D E HDR-EC14FDT( )-( )+ HDR-EC26FDT( )-( ) =4.8 12= F Mating connector: HDR series male connector Through hole SMT Press-in IDC Soldering Crimping Wire wrapping Others

Right-angle through hole type female connector for PC HDR-EC( )LFDT( )-( )+ mm pitch connector For PC Right-angle Through hole EMI shielded HDR- EC ( ) LFD T ( )- ( )+ ➀ ➁ ➂ ➃ ➄ ➅ ➁ No.

11 Right-angle through hole type female connector for PC HDR-EC( )LFDT( )-( )+ mm pitch connector For PC Right-angle Through hole EMI shielded HDR- EC ( ) LFD T ( )- ( )+ ➀ ➁ ➂ ➃ ➄ ➅ ➁ No. of contacts: 14, 26 or 50 ➂ Type of contact LFD: Right-angle through hole type, female ➃ With ground contact ➄ Through hole length, contact plating lank : 1.65 mm, 1 : 2.08 mm, G2 ➅ Lock screw lank: None SLD : Screw lock SLE : Spring lock SLG : Screw lock (Panel thickness: 1.12 mm) Min. 0.1 μm Gold plate + Min. 0.5 μm Palladium alloy : 2.08 mm, Min μm Gold plate REF. 6 Lock screw A ± POS.#(n/2) 3.5 C (n/2-1) =D ±0.08 POS.#2 5 M POS.#(n/2+1) 6.6 POS.#(n/2) ➀ Shell ➁ Insulator ➂ Contacts ➃ racket ➄ oard lock Lock screw 0.4 E POS.#(n/2+1) POS.#2 6.1 ±0.1 ø0.65 ±0.05 ø ±0.05 E ±0.1 ± ±0.03 ± ø2.3 ±0.1 2-ø Recommended PC layout POS.#2 Dimensions Part No. A C HDR-EC14LFDT( )-( ) HDR-EC26LFDT( )-( ) HDR-EC50LFDT( )-( ) ± ± ± ±0.03 Edge of PC D 6=4.8 12=9.6 24=19.2 E Mating connector: HDR series male connector Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole

12 EMI-filtered vertical plastic housing for standard and thin cable HDR-E( )LP( )( )-( ) mm pitch connector Housing Vertical EMI shielded HDR- E( ) LP ( )( )- ( ) ➀ ➁ ➂ ➃ ➄ ➅ ➁ No. of contacts 14, 26 or 50 ➂ Type of housing: Vertical type ➃ Compatible cable A: Standard cable : Thin cable ➄ Color of housing lank: Gray 5 : lack ➅ Length of lock spring lank: PC side lock screw -SLE LS : PC side lock screw -SLK C A Dimensions Part No. A C HDR-E14LPA( )-( ) HDR-E26LPA( )-( ) ø HDR-E50LPA( )-( ) HDR-E50LP( )-( ) For use with connectors: HDR series IDC type cable connector HDR-E( )MAG1+, HDR-E( )FAG1+ Required tools: Clamp caulking tools: FHPT-0024A, for 14 contacts cable connectors (Refer to page Tool-10) FHPT-0022A, for 26 contacts and 50 contacts thin cable connectors FHPT-0023A, for 50 contacts thick (standard) cable connectors Through hole SMT Press-in IDC Soldering Crimping Wire wrapping Others

13 EMI-filtered screw-lock vertical type plastic housing HDR-E26LPH mm pitch connector Housing Vertical EMI shielded HDR- E 26 LP H ➀ ➁ ➂ ➃ ➁ No. of contacts: 26 ➂ Type of housing ➃ Serial number HONDA JAPAN Screw size M Mating connector: HDR series female connector For use with connector: HDR-E26MAG1+, HDR-E26MSG1+ Required tools: Clamp caulking tools: FHPT-0022A (Refer to page Tool-10) Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole

EMI-filtered vertical type plastic housing with mounting hardware for spring-lock, for heavy wires and relay connections HDR-E26LPKA+ mm pitch connector Housing For Relay connections EMI-filtered

14 EMI-filtered vertical type plastic housing with mounting hardware for spring-lock, for heavy wires and relay connections HDR-E26LPKA+ mm pitch connector Housing For Relay connections EMI-filtered countermeasures HDR- E 26 LP K A+ ➀ ➁ ➂ ➃ ➄ ➁ No. of contacts: 26 ➂ Form of housing Vertical type housing ➃ Serial number For use with cables: Outside diameter of heavy wire: mm ➄ Thickness of relay panel: 1.6 mm Ø11.7 Max. Ø M2 0.4 Panel Connector ➀ Plastic Cover ➁ Inner Shell ➂ Inner Shell A ➃ Lock Screw ➄ Plate (For lock screw) Mating connector: HDR series of spring-lock type connector For use with connectors: HDR series of soldering type male or female connector HDR series of IDC type male or female connector Dip SMT Press-in IDC Soldering Crimping Wire wrapping Others HDR series

15 EMI-filtered screw-lock vertical type plastic housing for heavy wires HDR-E26LPK+ mm pitch connector Housing Vertical type EMI-filtered countermeasures HDR- E 26 LP K+ ➀ ➁ ➂ ➃ ➁ No. of contacts: 26 ➂ Form of housing Vertical type housing ➃ Serial number For use with cables: Outside diameter of cable: mm Ø M Connector 19.2 ➀ Plastic Cover ➁ Inner Shell ➂ Inner Shell A ➃ Thumb screw Mating connector: HDR series of screw-lock type connector For use with connectors: HDR series of soldering type male or female connector HDR series of IDC type male or female connector Dip SMT Press-in IDC Soldering Crimping Wire wrapping Others HDR series

16 EMI-filtered spring-lock vertical type plastic housing HDR-E26LPJ+ mm pitch connector Housing Vertical type EMI-filtered countermeasures HDR- E 26 LP J+ ➀ ➁ ➂ ➃ ➁ No. of contacts: 26 ➂ Form of housing Vertical type housing ➃ Serial number ➀ Plastic Cover A ➁ Plastic Cover ➂ Inner Shell ➃ utton ➄ Inner Shell A ➅ Lock spring Mating connector: HDR series of spring-lock type connector For use with connectors: HDR series of soldering type male or female connector HDR series of IDC type male or female connector Dip SMT Press-in IDC Soldering Crimping Wire wrapping Others HDR series

17 EMI-filtered vertical type plastic housing with mounting hardware for spring-lock, for thin wires and relay connections HDR-E26LPHA+ mm pitch connector Housing For Relay connections EMI-filtered countermeasures HDR- E 26 LP H A+ ➀ ➁ ➂ ➃ ➄ ➁ No. of contacts: 26 ➂ Form of housing Vertical type housing ➃ Serial number For use with cables: Outside diameter of thin wire: mm ➄ Thickness of relay panel: 1.6 mm Ø6.5 Max. HONDA JAPAN Panel Connector ➀ Plastic Cover ➁ Inner Shell ➂ Inner Shell A ➃ Lock Screw ➄ Plate (For lock screw) Mating connector: HDR series of screw-lock type connector For use with connectors: HDR series of soldering type male or female connector HDR series of IDC type male or female connector HDR series Others Wire wrapping Crimping Soldering IDC Press-in SMT Dip

Soldering type female connector for cables HDR-E26FSG1+ mm pitch connector For cables Soldering type EMI-filtered countermeasures HDR- E 26 FS G1+ ➀ ➁ ➂ ➃ ➄ ➁ With metal shell ➂ No.

18 Soldering type female connector for cables HDR-E26FSG1+ mm pitch connector For cables Soldering type EMI-filtered countermeasures HDR- E 26 FS G1+ ➀ ➁ ➂ ➃ ➄ ➁ With metal shell ➂ No. of contacts: 26 ➃ Form of housing FS: Soldering type, female connector, AWG#28 Insulator OD: 1.0 mm max. ➄ Contact plating G1: Min mm Gold plate 12=9.6 Pos.#13 Pos.# Pos.#13 12=9.6 Pos.# Pos.#26 15 Pos.# ➀ Female Contact ➁ Shell ➂ Insulator ➃ Spacer Pos.#26 12=9.6 Pos.#14 Mating connector: HDRA series, male connector For use with connectors: HDR-E26LPH( ), HDR-E26LPJ+, HDR-E26LPK( ), HDR-E26ALP( )+ HDR series Others Wire wrapping Crimping Soldering IDC Press-in SMT Dip

EMI-filtered screw-lock right-angle type plastic housing HDR-E26ALPA+ mm pitch connector Housing Right-angle EMI-filtered countermeasures HDR- E 26 ALP A+ ➀ ➁ ➂ ➃ ➁ No.

19 EMI-filtered screw-lock right-angle type plastic housing HDR-E26ALPA+ mm pitch connector Housing Right-angle EMI-filtered countermeasures HDR- E 26 ALP A+ ➀ ➁ ➂ ➃ ➁ No. of contacts: 26 ➂ Form of housing Right-angle ➃ Serial number For use with cables: Outside diameter of cable: mm ➀ Plastic Cover A ➁ Plastic Cover ➂ Inner Shell ➃ Inner Shell A ➄ Thumb screw PC-side connector Mating connector: HDR series of screw-lock type connector For use with connectors: HDR series of soldering type male or female connector HDR series of IDC type male or female connector HDR series Others Wire wrapping Crimping Soldering IDC Press-in SMT Dip

EMI-filtered screw-lock vertical type plastic housing HDR-E50LPH mm pitch connector Housing Vertical type EMI-filtered countermeasures HDR- E 50 LP H ➀ ➁ ➂ ➃ ➁ No.

20 EMI-filtered screw-lock vertical type plastic housing HDR-E50LPH mm pitch connector Housing Vertical type EMI-filtered countermeasures HDR- E 50 LP H ➀ ➁ ➂ ➃ ➁ No. of contacts: 50 ➂ Form of housing Vertical type housing ➃ Serial number Ø M Connector HDR-E50MSG ➀ Plastic Cover ➁ Inner Shell ➂ Inner Shell A ➃ Thumb screw Mating connector: HDR series of screw lock type connectors For use with connectors: HDR-E50MSG1+ HDR-E50M( )G( )+ Dip SMT Press-in IDC Soldering Crimping Wire wrapping Others HDR series

M20 Connectors Specification

M20 Connectors Specification Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical