Pirate Sandboat. Assembly Instructions REQUIRES 2 PEOPLE FOR ASSEMBLY. Item# 00128A To order replacement parts, please visit
|
|
- Clement Allen
- 6 years ago
- Views:
Transcription
1 Please retain this information for future reference ssembly nstructions REQURES 2 PEOPLE FOR SSEMBLY. 3+yrs tem# To order replacement parts, please visit ULT SUPERVSO REQURE. FOR OUTOOR USE OLY. CUTO: ULT SSEMBLY REQURE. Hardware contains small screws with sharp points. Keep unassembled parts out of the reach of small children. USE MTECE: -Use on level surfaces only -Please check assembly at regular intervals, and frequently tighten hardware if necessary. f maintenance is not carried out, the product could cease to function properly. WR: CHOK HZR. Small parts and sharp points, not suitable for children under 3 years. 1
2 PRTS LST 1 2 ssembly nstructions x 5 pcs tem # x 2 pcs x 4 pcs x 2 pcs x 2 pcs x 2 pcs x 7 pcs Bolt x 27 pcs 1 3/16 in / 30 mm B. Bolt x 4 pcs 1 3/8 in / 35 mm C. Bolt x 4 pcs 1 3/4 in / 45 mm. Bolt x 16 pcs 2 3/16 in / 55 mm E. Bolt x 3 pcs x 2 pcs F. Bolt x 1 pc 4 3/8 in / 110 mm. Washer x 16 pcs H. Large Washer x 2 pcs. Countersunk Washer x 43 pcs. Cross owel ut x 16 pcs x 2 pcs HRWRE K. ut x 1 pc L. Spacer x 1 pc M. Bolt x 5 pcs 1 9/16 in / 40 mm. Wood Screw x 12 pcs (1/2 in / 12mm) O. Snap x 12 pcs x 2 pcs llen Wrench x 1 pc The following tools (not included) are required for assembly: Phillips Pliers screwdriver 3 3/16 in / 80 mm Before calling customer service, please locate the batch code number (example: 2693/65006/04) found on the bottom or back of your product. 2
3 STEP 1 ssembly nstructions tem # STEP E STEP 3 3 B 1 B 9 M F H L 10 8 H K 3
4 STEP 4 ssembly nstructions tem # E 13 E B B STEP
5 STEP 6 ssembly nstructions 15 tem # STEP
6 ssembly nstructions 2010 KidKraft, LP tem # STEP 8 18 STEP C 21 C M M M M 6
7 ssembly nstructions tem # STEP STEP
8 ssembly nstructions tem # STEP STEP
9 ssembly nstructions tem # STEP 14 STEP
10 ssembly nstructions tem # STEP 16 Screw red flag pole out for assembling blue canopy, then tighten it again. 7 Secure both corners of liner (part 35) with plastic strip (part 36). STEP Fold liner cover over so the holes align Secure both corners of liner (part 35) with plastic strip (part 36). 10
11 ssembly nstructions tem # STEP STEP 19 1" 8" 1" 1" O O O nsert the wood screws as shown in the above picture. There are no holes, but you can use the listed measurements as a guide. rilling should not be necessary. 11
12 1" 8" ssembly nstructions 1" tem # STEP 20 nsert the wood screws as shown in the above picture. There are no holes, but you can use the listed measurements as a guide. rilling should not be necessary. 1" O O O 12
13 STEP 21 nsert the wood screws as shown in the above picture. There are no holes, but you can use the listed measurements as a guide. rilling should not be necessary. ssembly nstructions 1 1/2" 26 1/2" 1 1/2" tem # /4" 2 9/16" O O 13
14 ssembly nstructions tem # STEP /2" 26 1/2" 1 1/2" nsert the wood screws as shown in the above picture. There are no holes, but you can use the listed measurements as a guide. rilling should not be necessary. 2 9/16" 3/4" O O 14
15 3/8" 3/8" 2010 KidKraft, LP ssembly nstructions tem # STEP /4" 9 1/4" nsert the wood screws as shown in the above picture. There are no holes, but you can use the listed measurements as a guide. rilling should not be necessary. O O 15
16 ssembly nstructions tem # STEP COMPLETE Snap mesh cover into place when not in use. 16
17
Vintage Kitchen in Pink Assembly Instructions
2010 KidKraft, LP WARNING: ADULT ASSEMBLY REQUIRED. Product includes small parts with potentially hazardous sharp points and sharp edges in the unassembled state. Keep unassembled parts away from children.
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationInstallation Instructions
Articulating Dual Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied
More informationK-Emily Twin Nkl Canopy Bed K-Emily Twin Pink Canopy Bed K-Emily Purple Twin Canopy Bed
Parts and Hardware List A. Headboard 1 pc B. Footboard 1 pc C. Side Rails 2 pcs D. Support Slats 3 pcs E. Leg Supports 3 pcs F. Long Canopy Rails 2 pcs G. Short Canopy Rails 2 pcs H. Long Posts 2 pcs I.
More informationLIGHT BEAM ANTENNA MaxRange Antenna Series Assembly Instructions MaxRange Plus Digital / High Definition Television Antennas
LIGHT BEAM ANTENNA MaxRange Antenna Series Assembly Instructions MaxRange Plus Digital / High Definition Television Antennas Assembly Instructions 1 MaxRange Plus Antenna These instructions will lead you
More informationAnnabelle Dollhouse. Assembly Instructions. 37 x2
HRWRE. Cross owel olt x 13 pcs 1 11/16 in / 43 mm. Cross owel Nut x 13 pcs nnabelle ollhouse PRTS LIST: 1 ssembly Instructions 2 3 please visit 4 C. Hex olt x 4 pcs 1 9/16 in / 40 mm. Screw x 52 pcs 13/16
More informationSEAT-361 E-Z-Go RXV RHOX Seat Kit Installation Instructions
SEAT-361 E-Z-Go RXV RHOX Seat Kit Installation Instructions Contents of SEAT-361 RHOX 300 Series Rear Seat Kit: a (1 ea.) Front Seat Back Support, Driver Side b (1 ea.) Front Seat Back Support, Passenger
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationAssembly Instructions Nevins Phone Booth
Assembly Instructions Nevins Phone Booth Included Hardware Tools Required supplied by installer Drill & Bit Bolt A - (16) 1/4-20 x 1-1/2 hex head Bolt B - (20) 1/4-20 x 2-1/2 phillips head Screw 1 - (24)
More informationSapper XYZ Monitor Arm Installation Instructions
9/5/2012 Sapper XYZ Monitor rm Installation Instructions 5900800 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower to upper jaw 5/32 () lamp
More informationKX2 Side KX installation
KX2 Side KX installation NOTE: The installation of any Side KX parts does NOT require the unsoldering of any connection nor removal of ANY of the boards from within the radio! The user/installer assumes
More informationSapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationKids Scandinavia - XL Storage Box
Kids Scandinavia - XL Storage Box ssembly nstructions - Please keep for future reference Retain these instructions for future reference 7/ 99/ imensions Width - 7cm epth - 2cm eight -.cm Sainsbury s rgos
More informationSLOANE WHITE / COBALT / CRIMSON LEANING DESK
SLONE WHITE / OLT / RIMSON LENING ESK SSEMLY HRWRE Missing hardware? Please call 800.606.6387 for replacements. 2 - large bolts 6 - small bolts 10 - wood dowels 8 - spring washers 8 - flat washers 20 -
More informationAUTOMATIC ADVANCE MANUAL
AUTOMATIC ADVANCE MANUAL AVL Looms, Inc. 3851 Morrow Lane, Suite #9 Chico, CA 95928-8305 530 893-4915 530 893-1372 fax # info@avlusa.com www.avlusa.com Copyright 2009 TABLE OF CONTENTS Page # I. Parts.........................
More informationIMPORTANT: WILL NOT FIT COUNTRYMAN MODELS
Part #1410-0102-07 2 3 1 IMPORTANT: WILL NOT FIT COUNTRYMAN MODELS Apply masking tape around the bottom grille opening and across the bottom of the upper facto ry grille.. Open the hood and remove the
More informationAssembly Instruction Item No. : HF SKU No. : Description: 48IN CHERRY CORNER FIREPLACE
ssembly Instruction Item No. : H170192 SKU No. : 810392478 Description: 48IN HRRY ORNR IRPL Option Option To prevent serious injury or death, this product is equipped with a wall anchoring system. efore
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationSapper XYZ Crossbar Monitor Arm Installation Instructions
02/13/2015 Sapper XYZ rossbar Monitor rm Installation Instructions 59046 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower to upper jaw 5/32
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationMOD-5421/5422/5423/5424/5425/5426
Thank you for purchasing the MODWY! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationM10 x 75mm Sockethead Cap Screws. 5mm Fender Washer (12) Included - (8) Required. #10 x 2.5" PH Wood Screws. (30) Included - (24) Required
Door System Unit - Hardware Tools Included: (2) 2mm Allen Wrenches, (2) 3mm Allen Wrenches, (2) 4mm Allen Wrenches, (2) 6mm Allen Wrenches, and (1) 8mm T-Handle Allen Wrench Tools Required: Phillips Screwdriver,
More informationVibe Buffet Assembly Instructions
ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt bolt locking dowel long x nut x x0 screw x8 x H I J K small screw x4 V W safety strap x
More informationAssembly Instructions Nevins Phone Booth
Assembly Instructions Nevins Phone Booth Included Hardware Tools Required supplied by installer Drill & Bit Socket Wrench Bolt A - (16) 1/4-20 x 1-1/2 hex head Bolt B - (20) 1/4-20 x 2-1/4 phillips head
More informationJesse Entertainment Unit Assembly Instructions
esse ntertainment Unit ssembly nstructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt x32 dowel x16 D F small screw x16 L + R L + R locking nut x32 cam
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationDeluxe Let s Cook Kitchen
Please retain this information for future reference Deluxe Let s ook Kitchen ssembly Instructions To order replacement parts, please visit 45 43 6 7 44 4 5 8 10 12 15 16 17 20 13 21 22 9 11 14 18 19 30
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationItem Name: Carlisle Mini Hall Tree SKU: DIME For assistance with assembly, please contact Hayneedle Customer Care Center /12
Item Name: arlisle Mini Hall Tree SU: IM039- For assistance with assembly, please contact Hayneedle ustomer are enter -888-880-4884 /2 PR-ASSMY PRPARATION:! WARNING: Failure to follow these directions
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationSTEP 1 : DESTROYER FRONT BUMPER INSTALL GATHER YOUR TOOLS AND LAY OUT YOUR PARTS... *shorty bumper to show hardware* Tools Required:
DESTROYER FRONT BUMPER INSTALL JL STEP 1 : GATHER YOUR TOOLS AND LAY OUT YOUR PARTS... Tools Required: - Utility knife - 11/16 Deep socket - Ratchet - 11/16 Crescent wrench - Ratchet Extension - 1/4 socket
More informationINTRODUCTION TOOLS AND SUPPLIES
INTROUTION 1 The MFJ Ground-oupled gives you a stable way to mount your vertical antenna and provides an effective ground by just setting the base down and standing on it to push the legs firmly into the
More informationASSEMBLY INSTRUCTIONS MANUAL
PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)
More informationINSTALLATION INSTRUCTIONS
SG57f GENUINE PARTS INSTALLATION INSTRUCTIONS. DESCRIPTION: Sunroof Wind Deflector. APPLICATION: Pathfinder; Frontier with no roof rails 3. PART NUMBER: 999D4-XR00 4. KIT CONTENTS: Item No. ) ) 3) 4) 5)
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationEMERSON HOUSE INSTRUCTIONS
EMERSON HOUSE INSTRUCTIONS CAUTION: Adult Assembly Required. Hardware contains small screws with sharp points. Keep the unassembled parts out of reach of small children. USE AND MAINTENANCE: Use on level
More informationASSEMBLY INSTRUCTIONS
MODEL: FH144119 ASSEMBLY INSTRUCTIONS FINGERHUT ATTENTION DO NOT RETURN TO THE STORE Contact MD Sports Customer Service * For additional resources and Frequently Ask Questions, please visit us at themdsports.com
More informationAssembly Instructions. #89868 Single Floor Carrel Teak HP Laminate
1 Assembly Instructions #89868 Single Floor arrel Teak HP Laminate #89868 Single Floor arrel Part rawing escription Qty Part rawing escription Qty Left Side Panel 1 A Hardware List A Socket Screw M5X15
More informationLIGHT BEAM ANTENNA MaxRange Antenna Series Assembly Instructions MaxRange Ultra Digital / High Definition Television Antennas
LIGHT BEAM ANTENNA MaxRange Antenna Series Assembly Instructions MaxRange Ultra Digital / High Definition Television Antennas Assembly Instructions 1 MaxRange Ultra Antenna These instructions will lead
More informationTabletop or Rolling Media Pod
U5 U5-S U6 U6-S Tabletop or Rolling Media Pod ssembly Guide For assistance, please contact us: U5-S_U6-S_2015_ heck out our other products online at www.copernicused.com WRNING 1-800-267-8494 mail info@copernicused.com
More informationWhite Black Espresso Corner Desk Assembly Instructions
White Black Espresso Corner Desk Assembly Instructions Page 1 White / Black / Espresso Corner Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
More informationBEST-RITE. Straight Wall Swing Panels 698. It s A Better Board Assembly Instructions. Since 1950
BST-RT R Since 1950 t s A Better Board www.bestrite.com Straight Wall Swing Panels 698 Assembly nstructions 1 WOW Straight Wall Swing Panels (698) Part rawing escription Qty Upright 2 A Hardware List A
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationJK JEEP MIDWIDTH FRONT BUMPER
SIGNATURE SERIES JK JEEP MIDWIDTH FRONT BUMPER INSTALLATION INSTRUCTIONS **PLEASE READ THROUGH THE INSTRUCTIONS BEFORE BEGINNING ANY PART OF THE INSTALLATION PROCESS** 1. Begin the installation of your
More informationSIGNATURE FRONT BUMPER INSTALL
SIGNATURE FRONT BUMPER INSTALL JL **PLEASE READ THROUGH THE INSTRUCTIONS BEFORE BEGINNING ANY PART OF THE INSTALLATION PROCESS** 1. You can now remove the trim strip (2 vertical clips, 4 horizontal, 2
More informationThanks for shopping with Improvements! 7 Wood Garden Bridge with Removable Plugs Item #573366
Thanks for shopping with Improvements! 7 Wood Garden Bridge with Removable Plugs Item #73366 Note: Danger: Do not overload this bridge. This bridge is NOT REOMMENDED for weight of more than 0 lbs. Do not
More informationCABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS
Assembled cabanas are large & heavy. Assemble at place of use. CABANA / PAVILION ASSEMBLY ALUMINUM FRAME MODELS Step 1 CAUTION: To avoid damage to the finish of your Cabana frame, prepare a smooth, non-scratch
More informationSit N Sleep Bed 758/ /5401. Assembly Instructions - Please keep for future reference
Sit N Sleep ed ssembly nstructions - Please keep for future reference 8/18 8/01 MPRTNT NT: The top surface of the mattress should not come above this line. imensions Width - 00cm epth - /1cm Height - 10.cm
More informationNew England TallBoy. Assembly Instructions - please keep for future reference. Important Please read these instructions fully before starting assembly
New England TallBoy ssembly nstructions - please keep for future reference QN9 464/3944 Dimensions Width - 30cm Depth - 24cm Height - 172cm mportant Please read these instructions fully before starting
More informationTherma-Tru Door Gallery Setup Instructions Swing Unit with Hardware Kit - Hardware Part # MADGSWU15 (Swing Unit) Part # MADGHKSU10 (Hardware Kit)
Swing Unit with Hardware Kit - Hardware Tools Included: 4mm Allen Wrench, 6mm Allen Wrench, 8mm T-Handle Allen Wrench (1) 3/4" Drill Bit, (1) 7/32" Drill Bit and Hole Template Guide Tools Required: Phillips
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationCAROLINA SWIVEL DESK CHAIR ASSEMBLY INSTRUCTIONS
pottery barn kids AROLNA SWVEL DESK AR ASSEMLY NSTRUTONS www.potterybarnkids.com Date: 2012-Jun-30 Page 1 of 5 mportant Safety nstructions: Please read all instructions carefully before assembling. or
More informationLarge Wood Windmill Assembly Instructions
CROW S NEST (TOP VIEW) TOWER (SIDE VIEW) 0 QTY 2 2 ITEM QTY 2 QTY QTY 8 QTY 8 QTY 4 TOP TOP TOP 47 9 QTY 4 QTY 4 QTY 4 QTY 4 QTY 4 ITEM 6 ITEM 7 ITEM 8 ITEM 3 ITEM 9 ITEM 4 ITEM 2 ITEM 5 47 Leg QTY 4 42.5
More informationPPFE 12 Miter Disk Sander
PPFE 12 Miter Disk Sander Instructional Manual 1 2017 framingsupplies.com Parts 1. Base 2. Sanding Wheel 3. Guide 4. Guide Axle 5. Guide Handle 6. Bearing Assembly 7. Triangle 2 3 6 7 4 1 5 Set-Up Instructions
More informationIsuzu D-Max Part Numbers Black Polished
SB007 Sports Bar Fitting Instructions Isuzu D-Max 0 Part Numbers - 55000 - Black - 5000 - Polished Installation Time: 0 min (Approximately) PLEASE KEEP INSTRUCTIONS IN GLOVE BOX FOR FURTHER USE RECOMMENDED
More information# 2204 PRINCETON STAIR BUNK SLATE - GREY
SFETY WRS # 0 PRCETO STR UK SLTE - REY. Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed.. lways use the recommended
More informationTools Required: - Utility knife - 11/16 Deep socket - Ratchet - 11/16 Crescent wrench - Ratchet Extension - 1/4 socket - Electrical tape
DESTROYER FRONT BUMPER INSTALL JL STEP 1 : GATHER YOUR TOOLS AND LAY OUT YOUR PARTS... Tools Required: - Utility knife - 11/16 Deep socket - Ratchet - 11/16 Crescent wrench - Ratchet Extension - 1/4 socket
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationESRA III. Expressive System for Robotic Animation
ESRA III Expressive System for Robotic Animation 1 ESRA III Kit Contents 1 Hitec Servos 8 Upper Eye Support 2 Dagu (New as of 7/12) 9 Lower Eye Support 3 Eye Balls 10 Main Support 4 Flat Servo Plate 11
More informationBramley Bookcase L4305
Thank you for shopping with GLT, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationBBULTRA Basketball Tower Installation
Ph: 1300 500 314 Basketball Tower Installation Thank you for your purchase of the Ultra adjustable Basketball system. To ensure that our equipment will provide years of use to you, we are including this
More informationRough Country JK Modular Winch Mount Bumper With Light End Caps
Rough Country JK Modular Winch Mount Bumper With Light End Caps Note: These instructions involve cutting parts of your vehicle. Please read all instructions prior to starting. Note: This installation also
More informationTEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER PART # 17FJ26MA
\ TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER 02-05 PART # 17FJ26MA NOTE: Please read this information before assembling. Complete step by step instruction sheets will be
More informationBOX-115 Club Car Precedent Utility Box Mounting Kit Installation Instructions
BOX-115 Club Car Precedent Utility Box Mounting Kit Installation Instructions Contents of BOX-115 Utility Box Mounting Kit: a (1 ea.) Utility Box Support Frame, Passenger Side b (1 ea.) Utility Box Support
More information4-Piece Table Tennis Table
Item# 45-6074 4-Piece Table Tennis Table Please keep this instruction manual for future reference If you have any problems with your new product, please contact Triumph Sports USA at 1-866-815-4173, or
More informationMedium HoneyBadger Chase Rack Installation Instructions
PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading
More informationInstall. instructions. B8 A4/S4 RS4 Blackout Mesh Style Grille. By: 7716 Wiles Rd.Coral Springs, FL
Install instructions B8 A4/S4 RS4 Blackout Mesh Style Grille By: Preface: The best fitting grille on the market! Completely change the look of your Audi A4 or S4. This mesh style grille features a black
More informationSHOWER ENCLOSURE INSTALLATION
T F e34 x 46 s a QUATRA LUX 32 x 46 / ele A R r r fo SHOWER ENCLOSURE INSTALLATION I NSTRUCTIONS d e D v o r p IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without
More informationRugged Ridge 2 Receiver Hitch Kit (J21068)
Rugged Ridge 2 Receiver Hitch Kit (J21068) Installation Time: 1-2 Hours Tools Required: ¾ Open End Wrench 18 mm Socket ¼ drive Pliers/Needle nose pliers/channel locks, etc. Torque wrench Phillips head
More informationA. Top Unit 1 Pc. For assembly see instructions in carton:
88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationSAN DIEGO - TV Unit. Assembly Instructions - Please keep for future reference 389/6620
SN GO - TV Unit ssembly nstructions - Please keep for future reference 389/6620 imensions Width - 125cm epth - 40cm eight - 50cm mportant Please read these instructions fully before starting assembly f
More informationNISSAN NV200 CHEVY CITY EXPRESS WALL LINER KIT INSTALLATION INSTRUCTIONS
NISSAN NV200 CHEVY CITY EXPRESS WALL LINER KIT INSTALLATION INSTRUCTIONS NOTES: 1. Before commencing, remove all wall liners and D Rings already installed in the vehicle. 2. Consult layout PDF and compare
More informationMobile TV Cart Instruction Manual SKU: STAND-TV03E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv03e
More informationAustin Entertainment Unit. FLOOR AREA 2M x 2M. 2hr 2 PERSON ASSEMBLY 1 / 11
LOOR RE 2 x 2 2hr PPROXTE SSELY TE 2 PERSON SSELY 1 / 11 REQURE SSELY SPE Tips before you start: 1. Please check that all parts are present before you start the assembly of your furniture. 2. or ease and
More informationCook's Corner Kitchen Assembly Instructions
Assembly Instructions 00 Melissa & Doug, LLC All rights reserved 0 We care about your comments Please call us! -800-84-948 www.melissaanddoug.com PARTS D A E I ( pieces) Q N B F J R ( pieces) S ( pieces)
More information10" E-Series D-Series - Pair. kit includes (14) (4) (4) It is strongly recommended that this product be installed by a professional.
2014 GMC 1500 grille installation instructions 10" E-Series D-Series - Pair kit includes (14) (14) (4) 5 /16-18x 5 /8 Button Socket 5 /16-18 Low Profile Nylock Nut M6-1.0x30mm Button Head Socket (14) (4)
More informationAssembly Instructions
Assembly Instructions 24" x 12" and 30" x 12" Items: 36640 and 36641 Video assembly instructions available at: aqueonproducts.com Parts List End A Panels x2 Middle C Stringers x2 Bottom B Stringers x2
More informationBrooklyn Drawers Assembly Instructions
rooklyn rawers ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. locking nut x30 long screw dowel bolt x16 x46 x30 F G H W Safety Strap X Wall
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationBolt-On/Rugged Fender Flares Toyota Tundra (14-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY Extrusion 28.0 ft Short Screw 18 Nuts 42 Alcohol Wipe 4 Long
More informationASSEMBLY INSTRUCTION SHEET
ASSMLY NSTRUTON ST TM# FP-1829 SU# 810385720 SRPTON: RAN RRY FRPLA USTOMR SRV NO.: 1-888-878-8820 mail:customerservice@gbtcorporation.com ! Warning: 1. Need at least two adults to assemble this fireplace.
More informationThis Genius retractable screen is being provided in an easy to custom size and assemble kit.
T S HGHLY REOMMENE THT THE NSTRUTONS E RE THROUGH EFORE NSTLLTON. RETRTLE SREEN OOR MLNO 100 SNGLE OOR installation instructions 42 MM cassette NSTLLTON TOOLS Phillips Screwdriver measuring tape Hand-Held
More informationReplacing the build plate clamps
Repair manual Replacing the build plate clamps Instructions The build plate clamps hold the glass plate in place on the heated bed. There are two fixed in place at the back of the heated bed and two at
More informationAssembly Instructions. Table of Contents
HQ Little Foot Assembly Instructions Back of Handi Quilter, Inc. 501 North 400 West North Salt Lake, UT 84054 1-877-697-8458 Front of 2015 Handi Quilter, Inc. www.handiquilter.com Printed in the United
More informationPantry IMPORTANT NOTE
88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationAmerisun PowerSmart Snow Thrower Inspection Instructions
Amerisun PowerSmart Snow Thrower Inspection Instructions IMPORTANT SNOW THROWER SAFETY NOTICE Read ALL instructions included in this brochure. Failure to follow these instructions can result in injury
More informationASSEMBLY INSTRUCTIONS
TM MODEL: 44119-1 ASSEMBLY INSTRUCTIONS Blain's Please contact us before returning the product to the store. Toll Free: 877-82-814 Register Now on themdsports.com and Earn a One-Year Warranty for Free!
More informationRobodyssey ESRA III. Expressive System for Robotic Animation
Robodyssey ESRA III Expressive System for Robotic Animation Assembly and Operation Instructions Version 1.0 Robodyssey Systems, LLC. Phone/Fax: 609-585-8535 20 Quimby Avenue Web: www.robodyssey.com Trenton,
More informationTHANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER
THANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER Your safety and the safety of others is very important. Please read and understand all safety precautions before installing this or
More informationExtreme Air Splitter/Protector
Extreme Air Splitter/Protector Year: 2004-2005 MazdaSpeed Item: TDR-04M122 Thank you for purchasing the Track Dog Racing Air Splitter/Protector. The Air Splitter is designed to help protect the factory
More informationHT281 Dat e Code: 2 - HT WJ Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More information702mm. 400mm. 1058mm. Page 1 of 16. Baltic chest 5+2 drawers
BLTI HST +2 RWRS 702mm 00mm 8mm Page of 6 Please check all parts before you begin to assemble the item. This to make sure you always use the correct part. Fittings contained in the box. 8 pcs. am - x 2mm
More informationMS2 Straight Key Kit Assembly Manual
American Morse Equipment MS2 Straight Key Kit Assembly Manual Thank you for purchasing our MS2 Miniature Straight Key Kit! Please take a few minutes to look over these instructions before starting assembly.
More information