Tabletop or Rolling Media Pod
|
|
- Magdalen Wilson
- 6 years ago
- Views:
Transcription
1 U5 U5-S U6 U6-S Tabletop or Rolling Media Pod ssembly Guide For assistance, please contact us: U5-S_U6-S_2015_ heck out our other products online at WRNING mail Have your packing slip ready for reference This product is meant to be assembled by an adult. In its unassembled state, small parts present a hazard. To be used under direct supervision of an adult. U5 evice ivider (1) Headphone Holder (6) Switch between Landscape and Portrait positions Plastic Top (1) Landscape U6 ewey Mount (1) evice ivider (1) Included with models U5-S & U6-S only. Headphone Holder (6) Portrait Power Strip racket (1) Power Strip Not Included heck out some of our other great products Leg (2) Open Tub (2) Wire Management Rack (1) aster (4) Hidden Please Recycle ottom Tub Rack (1) 1 Life Time 5 Year Tub Warranty Frame Warranty
2 U5 U5-S U6 U6-S Tabletop or Rolling Media Pod efore beginning, you should have: dditional tools required: djustable wrench + Rubber Mallet x1 Screwdriver + OR Plastic Top U5 - ontents ox 1 Rubber Feet 4x Headphone Holder 6x Powerbar racket Right U5-S, U6- S ontents ox 1 ewey Mount Top ewey Mount ottom evice ivider Rack Powerbar Flat ar Powerbar racket Left Hardware ctual Size F M4 Lock Nut G Spacer U6 ontents - ox 1 Plastic Top Headphone Holder 6x 2 aster 4x ottom Tub Rack Leg Wire Management Rack OR In ox 1 M6x30mm 8x M6 Lock Washer 8x M6 Nut 6x M6x15mm arrel Nut (Installed on ottom Tub Rack) 4x Hardware ctual Size llen Key (Not to Scale) Stretcher x 1 Powerbar Flat ar M8 Lock Washer (Installed on ottom Tub Rack) 4x evice ivider Rack Powerbar racket Left Powerbar racket Right F M4 Lock Nut G Spacer H M5 corn Nut 10x I M6 12mm ontents - ox 2 Open Tub (4068-O-G) 10 lbs Weight Limit J M6 Lock Nut 2
3 U5 U5-S U6 U6-S Tips for ssembly - Using this Manual Watch for These Helpful Symbols This symbol denotes a 2 Person Task. For safety, please ensure that there are two people working on steps displaying this symbol Watch for this symbol throughout the ssembly Instructions. Wherever you see it, pay close attention. The symbol denotes a step needing extra attention to ensure it is done correctly 2 Person Task The Star symbol highlights an advisory note efore You egin Layout and identify all of the included parts The hardware has been packed according to step Read the assembly instructions over once to familiarize yourself with them Please note that in its unassembled state, this product contains parts that can be a hazard to small children; it should be assembled by an adult s You ssemble the Unit Follow the steps in sequence efore beginning each step, find the part(s) that you need for that step Pay attention to the labeling on the parts, they are there to help direct you at certain stages The title of each step states what you will be doing. Review the text and the pictures as you build the unit Life Time Tub Warranty 5 Year Frame Warranty Validate Your Warranty To validate your five year frame warranty & lifetime tub warranty, submit the ON-LIN form at ear ducator, Thank you for purchasing one of our products. I hope that the New Media Pod is useful in your classroom. If you have any questions, concerns, or ideas please contact us by telephone at or at info@copernicused.com. njoy using your new product and happy teaching. Jim Phillips hief ook and ottle Washer 3
4 1 ctual Size: Headphone Holder x 6 Plastic Top x 1 ttach Headphone Holders to Plastic Top - Press Headphone Holder down firmly into place. You may need to wiggle in the holder so one Side Tab goes in before the other. NOT: Headphone Holder may be very hard to snap in because once installed, they are not meant to be removed. Repeat for remaining Headphone Holders FOR U5 & U5-S ONLY: lign a Rubber Foot with the matching post in the underside of the Plastic Top - Insert Foot over the outside of the largest inner ring Repeat for remaining Rubber Feet Rubber Feet x 4 4
5 2 ctual Size: F x 2 G x 2 ewey Mount Top x 1 ewey Mount ottom x 1 U5-S & U6-S Only ssemble ewey Mount to Plastic Top Note the position of ewey Mount Top G G F F 5
6 3 evice ivider Rack Unfold evice ivider Rack evice ivider Rack Insert evice ivider Rack into holes on Plastic top Once in place, tighten all hardware on evice ivider rack. 6
7 5 ctual Size: x 2 x 2 x 2 Wire Management Rack x 1 Install Wire Management Rack lign the Wire Management Rack with the holes shown on the Plastic Top. Tighten bolts. 8
8 6 Powerbar racket Left Powerbar racket Right Rubber Mallet x1 Install Powerbar Holder Using a Rubber Mallet, insert Powerbar rackets into holes on Plastic Top. Note orientation of Powerbar rackets. ottom hooks should be facing outwards. ctual Size: 7 I x2 J x2 Powerbar Flat ar ssemble Powerbar Holder ttach Flat ar to Powerbar rackets. ompletely tighten hardware. I I J J 9
9 8 ctual Size: ttach Powerbar to Powerbar Holder Remove backing on double-sided tape and press your powerbar onto bracket face to adhere to Powerbar Holder. *Note: Power Strip Not Included Wrap Powerbar ord around hooks provided on bottom of Powerbar Holder. 10
10 9 ctual Size: x 2 x 2 x 4 x 4 Leg x 2 ottom Tub Rack x 1 barrel nuts & lock washers come installed on the ottom rack. Stretcher x 1 U6 & U6-S Only uild Frame 1 Stretcher can be installed on either side Front View Note orientation of legs 2 3 o not fully tighten the hardware. 11
11 ctual Size: x4 10 x4 x4 ttach uilt Frame to Plastic Top lign Legs ssembly with holes in the Plastic Top ssembly Use 4 holes shown 11 Tighten all screws. aster x 4 Install asters Flip entire ssembly onto its side, so the bottoms of the Legs are exposed. Flip entire ssembly onto its side, so the bottoms of the Legs are exposed Press asters firmly into the Legs - asters will click into place - If necessary, place a wrench between the wheels & tap in with a rubber mallet. 12
12 Tip Wire Management - Routing ables Note - Plastic Top is shown Transparent for illustration purposes only H H H H Headphone cables run though the side of the Plastic Top, underneath, come up through the hole in the center and plug into the jack box. xcess cable collects in the Wire Management Rack. FrontView H Top View 13 U5-S_U6-S - Version - 23 pril opernicus ducational Products Inc.
13 Tip Please note images are representational only to show how the ewey head works. Your ewey is mounted to the media pod, not a stand alone unit. To hange Projected Image Holding onto top mechanism - turn ipad 90 degrees If swivel tension ever needs to be tighter, tighten this bolt with 10mm wrench. Portrait Position Landscape Position NOT: Sometimes when you rotate the ipad your projected image does not rotate, in that case you need to tilt down the top mechanism to allow the ipad to adjust hanging from ocument amera to Stand Position Holding onto top Mechanism - tilt between ocument amera Position and Stand Position If folding tension ever needs to be tighter, tighten this bolt with 10mm wrench and the provided allen key. Inserting ipad The green piece slides in and out to secure ipad 14
AudioPod. Assembly Guide AUD1_3_4_2013_A Have your packing slip ready for reference WARNING AUD1/AUD3 AUD4
AUD1/AUD3 AUD4 TM AudioPod Assembly Guide AUD1_3_4_2013_A Check out our other products online at www.copernicused.com For assistance, please contact us: 1-800-267-8494 Email info@copernicused.com ave your
More informationRegal Reading Writing Center - Assembly Guide
RC107 Regal Reading Writing Center - Assembly Guide If parts are missing or you require assistance, please call: 1-800-267-8494 or email info@copernicused.com Have your packing slip ready for reference
More informationModular Teacher s Desk Systems
Modular Teacher s Desk Systems ssembly Instructions 1 Modular Teacher s Desk Components Part Drawing Description Qty Part Drawing Description Qty 90390 djustable Leg-1S 90369 Modular Pedestal 90391 djustable
More informationFlat Panel TV Cart Instruction Manual SKU: STAND-TV02D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv02d
More informationThe Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )
P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your
More informationBABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms
BABY WOLF LOOM Assembly Instructions for Knocked-Down Looms BEFORE YOU BEGIN Please read through the directions before beginning to assemble your loom. Unpack the loom parts carefully. Do not throw away
More informationThis instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently.
This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. Don t be put off by the size of the instruction manual as the large diagrams
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More informationItem Name: Carlisle Mini Hall Tree SKU: DIME For assistance with assembly, please contact Hayneedle Customer Care Center /12
Item Name: arlisle Mini Hall Tree SU: IM039- For assistance with assembly, please contact Hayneedle ustomer are enter -888-880-4884 /2 PR-ASSMY PRPARATION:! WARNING: Failure to follow these directions
More informationWOLF PUP LOOM TM & WOLF PUP LT LOOM TM
WOLF PUP LOOM TM & WOLF PUP LT LOOM TM Assembly Instructions FL3000 FL3006 FL3009 WOLF PUP WOLF PUP LT Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 p. 303.442.3212
More information4-Piece Table Tennis Table
Item# 45-6074 4-Piece Table Tennis Table Please keep this instruction manual for future reference If you have any problems with your new product, please contact Triumph Sports USA at 1-866-815-4173, or
More informationDesk/Wall-Mount Rack
Desk/Wall-Mount Rack Patent(s) Pending Installation Instructions Post P/N: 119-1752 119-1781 119-1782 119-4014 Frame P/N: 119-1591 119-1754 119-1755 Kit Contents (2) Frames (4) Posts Assembly Hardware
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationEDGE2 DUAL MONITOR ARM
EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationDrywall Lift Storage & Transportation Cart Model 110 Patents Pending
Drywall Lift Storage & Transportation Cart Model 110 Patents Pending WRNING: When transporting, LWYS secure the PNELLIFT Model 110 cart in the vehicle to prevent shifting of the load while in transit.
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationStar Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
More informationWEIGHT ADJUSTABLE ESPREE. Model 2ESP-WA-C48- Model 2ESP-WA-C60- 2ESP-WA Rev B 8/17 ASSEMBLY AND OPERATION
WEIGHT ADJUSTABLE ESPREE PNEUMATIC TABLE BASE 2ESP-WA Rev B 8/17 Model 2ESP-WA-C48- Model 2ESP-WA-C60- = SLV, BLK or WHT ASSEMBLY AND OPERATION PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationThe Nantucket Legacy Arbor
SSEMLY INSTRUTIONS The Nantucket Legacy rbor Please read through before starting assembly. IMPORTNT: HEK THE INSIDE OF YOUR POSTS FOR LL MTERILS. heck ox for These ontents In. the Keystone event of missing
More informationADJUSTABLE BASKETBALL SYSTEM ASSEMBLY INSTRUCTIONS AND OWNER'S MANUAL
IRONCLAD SPORTS, INC HIGHLIGHT HOOPS ADJUSTALE ASKETALL SYSTEM ASSEMLY INSTRUCTIONS AND OWNER'S MANUAL MODEL: HIL885!! WARNING FAILURE TO COMPLY WITH ANY OF THE WARNINGS IN THESE INSTRUCTIONS MAY RESULT
More informationSTOP! READ THIS FIRST
STOP! READ THIS FIRST Page 1 of 37 Getting Started With Your Pantograms GS1501 Embroidery Machine (the quick guide) Thank you for choosing Pantograms for your embroidery system provider. We encourage you
More information2 ADULTS REQUIRED FOR ASSEMBLING
2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your
More informationCreation Station Table
reation Station able ssembly Instructions Video ssembly Instructions: Go to www.martinuniversaldesign.com and click on ssembly Instructions to watch a video for HW SSEMBLE the U-DS90W / U-DS90B, reation
More informationINSTALLATION GUIDE. Model:B60 RECESSED IN WALL MOUNT
INSTALLATION GUIDE Model:B60 RECESSED IN WALL MOUNT Features: Installs between 16 (406mm) wood stud centers Mounting Pattern Compliance: VESA 100*100mm up to 600 x 400mm Level 5 degree horizontal adjustment
More informationASPEN OUTDOOR TABLE TENNIS
ASPEN OUTDOOR TABLE TENNIS Replacement Parts Order direct at or call our Customer Service department at (800) 225-7593 8 am to :30 pm Central Standard Time January 201 UPC Code 7-19265-51830-3 Staple your
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More informationYes 20 Charging Wall Cabinet for Tablets
Built with Anthro-DNA Owner's Manual for Yes 20 Charging Wall Cabinet for Tablets Part # YESCABGMPW Components at a Glance 1 2 4 5 8 7 10 3 6 9 Front of Cabinet (closed) 1. Locking front door to User area.
More informationSapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
More information326/455 Pontiac Installation Manual For Systems With A/C #14900 / #14920
326/455 Pontiac Installation Manual For Systems With / #14900 / #14920 PLESE RED LL INSTRUTIONS EFORE INSTLLING NY OMPONENTS OF THE TRU TR SERPENTINE SYSTEM Required Tools & Materials Prepping The lock:
More informationINSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD
For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationINSTALLATION MANUAL VERITY. friant.com/verity
INSTLLTION MNUL VERITY friant.com/verity 2 VERITY INSTLLTION MNUL General Information... 4 Safety & Support... 5 Installation Tools... 6 Staging & Installation... 7 Stand lone Units Single-Sided Structure...
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING WARRANTY AND USER INFORMATION CAN BE FOUND AT THE END OF THESE INSTRUCTIONS
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
More informationCV1B Sliding Table Installation and Setup Guide
CV1B Sliding Table Installation and Setup Guide Tech Mark, Inc 7901 Industry Drive North Little Rock, AR 72117 tel (501) 945-9393 fax (501) 945-0312 www.tech-mark.com email: info@tech-mark.com The CV1B
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationStrata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationHARVIL 3-IN-1 FLIP TABLE ASSEMBLY INSTRUCTIONS
HARVIL 3-IN-1 FLIP TABLE ASSEMBLY INSTRUCTIONS NGD1018/1022 THANK YOU! Thank you for your purchase of this Harvil product. We work around the clock and around the globe to ensure that Harvil products maintain
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationTOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
More informationINSTALLATION GUIDE Ceiling TV Mount MHP-52
ISTLLTIO GUIDE Ceiling TV Mount MHP-52 Max Load Capacity: 125 lbs (57kg) ote: Read entire instruction sheet before you start installation and assembly. Be sure to read this entire manual thoroughly and
More informationFind out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO p f
WOLF STROLLER FL3051 Assembly Instructions folded ready to travel open ready to weave For installation on Wolf Pup, Wolf Pup LT, Baby Wolf, and Mighty Wolf Looms Find out more at schachtspindle.com Schacht
More informationINSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationSapper XYZ Crossbar Monitor Arm Installation Instructions
02/13/2015 Sapper XYZ rossbar Monitor rm Installation Instructions 59046 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower to upper jaw 5/32
More informationINSTRUCTION BOOKLET #C20
INSTRUCTION BOOKLET #C0 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT IN SEVERE PERSONAL INJURY TO
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationMACHINE QUILTING FRAME
MACHINE QUILTING FRAME YOU WILL NEED TO PURCHASE: 5 pieces of 1-1/4 thin wall metal conduit (EMT) cut to your preferred length for the rollers. (Maximum 120 ) DETERMINING YOUR ROLLER LENGTH: Determine
More information6 BAY AV CREDENZA WITH DUAL DISPLAY MOUNT
D2/367M2 SSEMLY INSTRUCTIONS 6 Y V CREDENZ WITH DUL DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS For Wallbed models: Do-It-Yourself BOOKLET #C90 WARNING! ALL MURPY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationCharlotte Dressing Table & Stool Set L4294
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationStrata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1 with
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationPortable System Owners Manual
Portable System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Adult Assembly Required. This manual, accompanied by sales receipt, should be saved and kept
More informationFREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B
FREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B 1 TOOLS REQUIRED: CLAW HAMMER KNIFE 1/2 WRENCH OR SOCKET 1. USE KNIFE TO REMOVE ALL PLASTIC STRAPS FROM AROUND PALLET AND CARTON. STRAP 2. USE CLAW HAMMER
More informationSmall Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems without A/C #13605 / #13625
Small lock Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems without /C #13605 / #13625 illet Specialties, Inc. 500 Shawmut venue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
More informationA-dec 541 and 545 Delivery System Mount on Preference Collection 5580 I NSTALLATION GUIDE
-dec 541 and 545 Delivery System Mount on Preference ollection 5580 I NSTLLTION GUIDE Introduction Figure 1. -dec 500 abinet-mounted 541/545 Delivery System This document contains instructions for installing
More informationJesse Entertainment Unit Assembly Instructions
esse ntertainment Unit ssembly nstructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt x32 dowel x16 D F small screw x16 L + R L + R locking nut x32 cam
More informationBramley Bookcase L4305
Thank you for shopping with GLT, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried
More informationUsage and Assembly Instructions
Instructions #1037447 Product #795234 Revision D Usage and Assembly Instructions Rear Fork (Buttstock) Rear Fork Lock Knob Rail Lock Knob Front Fork (Forend) Rails Tilt Friction Knob Rail Extension Locks
More informationFitWork Walkstation Series 7 AdjusTables
FitWork Walkstation Tools Required: #2 Phillips Bit with Extension Page 1 of 20 A7TG660606H A7TR663232H FitWork Walkstation 4mm Hex Head Bit A7TG660632H A7TR383030H www.details-worktools.com A7TG663206H
More information** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at:
3/01/2007 VISIT THE LITIME WEB SITE: WWW.LITIME.COM ** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 1 (800) 225-3865 Double Shed Doors for Back
More informationVC-TABLE. Assembly Instructions
VC-TABLE Assembly Instructions Thank you for purchasing AVFI's Video Conferencing Table. This product was designed for multiple configurations. Connecting furniture will have its own instructions. Page
More information08+ KAWASAKI KLR PD NERF
08+ KAWASAKI KLR PD NERF 0505-1299 Before you begin, place the bike on a hard level surface where you have room to work. Lay out the parts included in this kit and compare to the parts list on page 5 of
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationASSEMBLY INSTRUCTIONS MANUAL
PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)
More informationCLARK 5-SHELF BOOKCASE
LRK 5-SHELF OOKSE MODEL N0. 06-70-2 SSEMLY INSTRUTIONS IMPORTNT: Please read and understand this manual before any assembly. efore beginning assembly of product, make sure all parts are present. ompare
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationSeries Assembly Instructions
ComforTrak TM Series Assembly Instructions EP-560, EP-860, EP-960 & EP-970 Models *Inversion Table images may vary slightly from your model. The EP-560 is shown here. BEFORE YOU BEGIN: Review all steps
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationThis guide contains everything you need to set up and operate all three. Inspira Imperial Quilting Frame Assembly...2
Congratulations on the purchase of your Husqvarna Viking Mega Quilter 18x8, Inspira Imperial Quilting Frame, and QBOT by Inspira! This guide contains everything you need to set up and operate all three.
More informationHatchback Wing Riser Kit
Hatchback Wing Riser Kit 2015-06-11 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation of aftermarket
More informationSIGNATURE FRONT BUMPER INSTALL
SIGNATURE FRONT BUMPER INSTALL JL **PLEASE READ THROUGH THE INSTRUCTIONS BEFORE BEGINNING ANY PART OF THE INSTALLATION PROCESS** 1. You can now remove the trim strip (2 vertical clips, 4 horizontal, 2
More information3 BAY AV CREDENZA WITH SINGLE DISPLAY MOUNT
D2/337M1 SSEMLY INSTRUCTIONS 3 Y V CREDENZ WITH SINGLE DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing
More informationASSEMBLY INSTRUCTIONS
TM MODEL: 44119-1 ASSEMBLY INSTRUCTIONS Blain's Please contact us before returning the product to the store. Toll Free: 877-82-814 Register Now on themdsports.com and Earn a One-Year Warranty for Free!
More informationStrata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box:
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached
More informationFull Size Bed CAUTION: You must read this before you proceed.
Full Size ed CUTON: You must read this before you proceed. NOTE : This ed is NOT a TOY. Keep your child / children at bay during the assembly process. The ED is EVY. To prevent injury to yourself or damage
More informationParts Included: T-Feet Assembly
Parts Included: T-Feet Assembly Foot Kit: J-Rail Kit: Column Kit: 2 Feet 2 T-Top Supports 2 J-Rails Hex Rod to be Included on a Crank Assembly only. 2 Electric or Crank Columns 3 rd Leg option for 3 leg
More informationre3d Assembling Gigabot: "Flatpack"
re3d Assembling Gigabot: "Flatpack" Your Gigabot was assembled, calibrated, tested, and taken apart for shipping purposes. All you need to do is reassemble it, and you're ready to go! Written By: Chris
More informationLegacy Woodworking Machinery a division of Phantom Engineering. The Legacy CNC. Assembly Manual
Legacy Woodworking Machinery a division of Phantom Engineering The Legacy CNC Assembly Manual New Orientation of the Legacy Step one: Re-orientation of the machine Remove the X-axis screw and supports.
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationMOD-5421/5422/5423/5424/5425/5426
Thank you for purchasing the MODWY! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
More informationWILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount
WILDING WALLBEDS INSTALLATION INSTRUCTION Side Mount For Wallbed models: Do-It-Yourself Insturction booklet C92 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE
More informationXceed ASSEMBLY MANUAL
Xceed ASSEMBLY MANUAL Table of Contents / Registration Congratulations on your commitment to fitness and your purchase of the Bowflex Xceed home gym. Before assembling your Bowflex Xceed home gym please
More informationThor Audi A4/S4 Skid Plate Installation Instructions
Thor Audi A4/S4 Skid Plate Installation Instructions Parts List: 1 Aluminum Skid Plate 2 Aluminum Side Wings 10 10mm Flat Washers 3 8mm Flat Washers 3 8mm Speed Clips 2 10x40mm Bolts 3 8x35mm Bolts 2 Rivet-nuts
More information* This item is for consumer use only and it is not meant for commercial use.
BRM 6110 For use under U.S. Patent numbers 6159132, D459773, D438264 * This item is for consumer use only and it is not meant for commercial use. OWNER S MNUL General Information Safety Before you undertake
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationINSTALLATION INSTRUCTIONS
TreadClimber INSTALLATION INSTRUCTIONS STAR TRAC FITNESS 1 of 14 635-4175 Rev: B NOTICE Installation of this product requires that 2 or more people are available to safely perform certain steps outlined
More informationAUTOMATIC ADVANCE MANUAL
AUTOMATIC ADVANCE MANUAL AVL Looms, Inc. 3851 Morrow Lane, Suite #9 Chico, CA 95928-8305 530 893-4915 530 893-1372 fax # info@avlusa.com www.avlusa.com Copyright 2009 TABLE OF CONTENTS Page # I. Parts.........................
More informationMOTORIZED STANDARD SHADE WITH CABLES Installation Instructions
Tools Needed Drill Measuring Tape Pencil 2 Level Plumb Line ¼ Masonry Drill Bit Hammer Linesmans Pliers Cable Cutters Phillips & Flat-Head Screw Driver 11/32 Socket or Open End Wrench 5/32 Allen Wrench
More informationMade in / Hech en CHINA Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
Owner s Manual Steel Round azebo Made in / Hech en HIN Distributed by Sears, Roebuck and o., Hoffman Estates, IL 079 See our extensive assortment of outdoor living products on-line at www.sears.com and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Single QuickStand Lite Parts A (1) Lower Arm A B C D B (1) Upper Arm C (1) Base D (1) Base Plate E (1) M8 Dynamic Arm Long F (1) Clamp Bracket G H (1) VESA Plate
More information