NewsLetter. A publication of SPE European Thermoforming Division

Size: px

Start display at page:

Download "NewsLetter. A publication of SPE European Thermoforming Division"

Marvin Nelson
5 years ago
Views:

1 Fall 2011 NewsLetter A publication of SPE European Thermoforming Division Table of Content ETD Chair message - page 1 ETD conference - pages Sponsorship - page 6 Parts competition - page 7 Training course - page 8 Classic lounge chair - page 9 ETD board - page 10 Welcome to The Fall Edition of your Newsletter Dear Members, Every year, the SPE President has an opportunity to recognize an individual within our industry who has provided outstanding service to the Society of. It gives me enormous pleasure to announce that at this year s SPE Antec Celebratory Banquet, the current SPE President, Ken Braney, presented the President s Cup to our own ETD Board Member, Yetty Pauwels. In his speech, Ken highlighted that Yetty was one of the founding members of SPE in Europe and has demonstrated much dedication to the organisation over the last 30 years. She was the SPE s first European staff member and has previoiusly been awarded the James Toner Service Excellence Award. Her involvement has played a big part in the SPE s global expansion coordinating many events over the years. I would like to offer Yetty my warmest congratulations! But now let me update you on our forthcoming Thermoforming Conference. It will be the second time in our history, (Viareggio 2004) that the SPE European Thermoforming Division will have their conference in Italy, which will be held from 26th -27th April 2012 in the NH Laguna Palace Hotel, Venice. (Mestre). On behalf of ETD, it s my pleasure to invite you join us and to play an active part at what will be our 8th European Thermoforming Conference. By attending you will have access to the entire World of Thermoforming and no doubt will benefit from networking and close interaction with your colleagues and piers. This venue provides excellent facilities for our speakers to present their technical and commercial papers. The program, which is nearing completion, offers two intensive days of presentations and workshops on both thin and thick gauge topics. Please go also to to see all details on the conference. I would also like to invite thermoformers to participate in the Parts Competition where there are several catagories. It is possible to enter as many parts as you wish in both thick and thin gauge parts sections, details of which can be found in this newsletter. In parallel to the conference a trade exhibition is held giving suppliers to our industry an exceptional opportunity to display their products, services and capabilities to a captive audience. Company s wishing to either sponsor the conference or to book a table top, (or indeed to do both), can contact us immediately. This is a unique opportunity to raise your profile at an event that is tailored for the Thermoforming Industry by persons within the Industry. It is widely viewed as the most relevant and important event in Last but not least I am pleased to announce that ETD has launched a new website. We hope this will be considered an interactive website targeting technological issues and subjects within the thermoforming industry. Please visit the site and we welcome your feedback. Find more under May I take this opportunity to thank you in advance for supporting the efforts of all those involved in raising the profile of Thermoforming and I wish you all a Merry Christmas and a happy and successful New Year! Reinhold Plot, Chair ETD

The Society of European Thermoforming Division invites you to the 8 th European Thermoforming Conference to be held in Venice from 26 th to 27 th April 2012 at NH Laguna Palace Hotel, Mestre, Venezia.

2 8 th european thermoforming conference Mark your calendar for Europe s leading event dedicated to the Thermoforming Industry! APRIL 2012 V ENICE (ME s TRE) 8 th EUROPEAN THERMOFORMING CONFERENCE 2012 Back on Track! The Society of European Thermoforming Division invites you to the 8 th European Thermoforming Conference to be held in Venice from 26 th to 27 th April 2012 at NH Laguna Palace Hotel, Mestre, Venezia. Be part of this conference. Again the agenda will include presentations from experts in the thermoforming industry and lively debates in workshops about technical and commercial issues. Moreover, the event provides the unique opportunity to meet colleagues and customers from the industry around the world. More details are available at Parallel Exhibition The conference is to be complimented by an informative and comprehensive exhibition (table top displays) of relevant latest product developments and services offered by a variety of leading suppliers to the thermoforming industry. This will also be held in the NH Laguna Palace Hotel and will create a discussion platform for exhibitors and conference participants. A partners programme will present the opportunity to experience the unique atmosphere and culture offered by Venice. Come to Venice, you ll be most welcome! - 2 -

european thermoforming parts competition World famous c ity of a rt: Venice Parts Competition Thermoformers are invited to participate in the European Thermoforming Parts Competition.

Entries with thick gauge parts will be possible in the categories Vehicle/Automotive, Industrial and Point of Purchase/Displays.

3 european thermoforming parts competition World famous c ity of a rt: Venice Parts Competition Thermoformers are invited to participate in the European Thermoforming Parts Competition. Originality, creativity, mould complexity and technical ability will be the judging criteria in order to promote advanced design and developments from a structural innovation perspective. Entries with thick gauge parts will be possible in the categories Vehicle/Automotive, Industrial and Point of Purchase/Displays. Thin gauge parts will be judged in the categories Food Applications, Medical Applications and General Packaging. More details: The city of Venice is simply stunning and completely unique. Founded on 117 different islands, Venice is linked by a series of over 150 canals, 400 bridges and many ancient pavements. Venice is without doubt one of the most beautiful and popular cities in the world, and is always admired by the many tourists that visit throughout the year. There are numerous famous Venice attractions and sights to see. Highlights include the Basilica San Marco; the San Marco Square, the Doge s Palace and the Accademia Gallery with wonderful masterpieces from the 14 th century to the 18 th century by world-famous artists, such as Picasso, Tintoretto, Titian, Tiziano and many others. The award winners will be presented at the European Thermo forming Conference. Fundamentals of Thermoforming training course Thin and Thick Gauge 25 th April 2012, h h presented by Peter Lichtherte, Technical Consulting & Management Experience Level: NH Laguna Palace Hotel, Venice (Mestre), Italy Registration fee: 175,00-3 -

Further information about the conference may be obtained from Yetty Pauwels, Society of European Thermoforming Division ETD Eric Sasselaan 51, B 2020 Antwerp, Belgium Tel.

4 Further information about the conference may be obtained from Yetty Pauwels, Society of European Thermoforming Division ETD Eric Sasselaan 51, B 2020 Antwerp, Belgium Tel , Fax spe.etd@skynet.be Venue & Accommodation NH Laguna Palace Hotel Viale Ancona, Mestre, Venezia, ITALY T , F f.sartori@nh-hotels.com, Accommodation: Special ETD Conference rates have been agreed! See also download fax form on or use phone, fax or 2 Airports Venice Marco Polo Airport (13km away), Treviso Canova Airport (30km away), Mestre Train Station 5 min. trip to NH Laguna Palace Hotel Fees Advance Conference registration fees, valid until 25 th January 2012: SPE-member 625, SPE-member 800, incl. 2 years SPE membership renewal non SPE-member 800, incl. 2 years SPE membership Extra surcharge of 100, after 25 th January Conference fee includes Welcome Reception, Lunches for both days and Conference Dinner. Hotel room is not included. Spouse s fee: 150, including Welcome Reception, Conference Dinner and Spouse programme Student s fee: 100, incl. Welcome Reception and Conference Lunches Tabletop display: SPE member 1.350, non SPE member 1.525, incl. 2 years SPE membership Fee includes full conference registration for 1 person. Why join SPE European Thermoforming Division? The SPE European Thermoforming Division (E.T.D.) is dedicated to helping you attain higher professional status through increased scientific, engineering and technical knowledge. Through its extensive international network, E.T.D. also provides an excellent opportunity to make valuable contacts. NH Laguna Palace Hotel For more information visit or fax this form to

5 CONFERENCE REGISTRATION FORM SPE 8th EUROPEAN THERMOFORMING CONFERENCE April 2012 Venice (Mestre), Italy I will attend the Welcome Reception 25 April the Conference Dinner 26 April I will be bringing my Spouse My Spouse will join the Spouse Programme Participation fee for Spouse: 150 I would like to attend the indicated Sessions: Thin Gauge Session or Thick Gauge Session Name: Company: Function: Address: Postcode: Country: Tel.: City: Fax: SPE-member; membership nr: non SPE-member Advance Conference registration fees, valid till 25 January 2012: SPE-member (incl. 2 years SPE membership renewal) non SPE-member 800 (incl. 2 years SPE membership) Extra surcharge of 100 after 25 January 2012 Conference fee includes Welcome Reception, Lunches for both days and Conference Dinner. Hotel room is not included. Spouse s fee: 150, including Welcome Reception, Conference Dinner and Spouse programme Student s fee: 100 incl. Welcome Reception and Conference Lunches Tabletop display: SPE member non SPE member (incl. 2 years SPE membership). Fee includes full conference registration for 1 person. Payment, by preference with money transfer (copy attached) Money Transfer: Rabo Bank, Venray, Netherlands, Account: BIC: RABO NL2U - IBAN: NL11 RABO Please charge the following credit card: Visa MasterCard Card no. Expiry date: / validation code: (m) (y) (last 3 digits on back of card) If the name and address of the cardholder is different from above please indicate the cardholder s name and address: Signature Please fax this form with payment details to or mail to: Society of, European Thermoforming Division, Eric Sasselaan 51, BE-2020 Antwerpen, Belgium - Tel: spe.etd@skynet.be

Society of CONFERENCE SPONSORSHIP As you know, the success of

delegates, but also on the support of the Industry as a whole.

Once again major recognition will be given to those

given maximum exposure throughout the Conference.

continuously displayed on advertising boards as well as

with the presentation of a commemorative plaque.

to demonstrate your product or service to the Industry.

marketing of your products or services to the ONLY

We advise you not to miss out on this unique opportunity.

supporting the efforts of all those involved in raising the

6 Society of CONFERENCE SPONSORSHIP As you know, the success of every conference depends not only on the support of the delegates, but also on the support of the Industry as a whole. With this in mind, we urge you to MAXIMISE YOUR IMPACT AND RAISE YOUR PROFILE by signing up for sponsorship at the most important industry event in Once again major recognition will be given to those organisations that support the Conference, their details being given maximum exposure throughout the Conference. Sponsors will have the opportunity to make a commercial presentation, company profile and logo will be posted on the ETD website for a period of 2 years, company details will be continuously displayed on advertising boards as well as recognition being given at the Conference Sponsors luncheon, with the presentation of a commemorative plaque. Additionally, you may wish to consider a Tabletop exhibition to demonstrate your product or service to the Industry. Tabletops are limited, therefore early application is recommended to avoid disappointment! These are the only opportunities for DIRECT sponsorship and marketing of your products or services to the ONLY Thermoforming Industry specific Conference in Europe. We advise you not to miss out on this unique opportunity. May we take this opportunity to thank you in advance for supporting the efforts of all those involved in raising the profile of Thermoforming and we look forward to meeting with you in Venice in 2012! If you have any questions please do not hesitate to contact Yetty Pauwels at spe.etd@skynet.be or call , for further details on Sponsorship. 7th European Thermoforming Conference CONFERENCE SPONSORS SPONSORS MULTIPACK Society of,

4th European Thermoforming PARTS Competition On the occasion of the next conference of the Society of European Thermoforming Division from 26 27 April 2012 in Venice, Italy; thermoformers are invited

7 4th European Thermoforming PARTS Competition On the occasion of the next conference of the Society of European Thermoforming Division from April 2012 in Venice, Italy; thermoformers are invited to participate in the 4th European Thermoforming Parts Competition. Originality, creativity, mould complexity and technical ability will be the judging criteria in order to promote advanced design and developments from a structural innovation perspective. Entries with thick gauge parts will be possible in the categories Vehicle/Automotive, Industrial, Point of Purchase/Displays, Technical Applications and Sanitary. Thin gauge parts will be judged in the categories Food Applications, Medical Applications, Electronic Applications and General Packaging. The essential points of the European Thermoforming Parts Competition are the design-orientated application of materials and the successful combination of technical innovation and design quality. Exceed the bounds of materials applications, present new application opportunities, combine the traditional with the innovative, take new steps in combining material and design to present the importance of materials for a design-orientated application: these are the aims of the European Thermoforming Parts Competition. The award winners will be presented at the 8th European Thermoforming Conference. We look forward to receiving your contribution to the European Thermoforming Parts Competition 2012! The 2-day conference will be held in Venice, Italy from April Further details are available at Information about the Conference and the Parts Competition may be obtained from: Yetty Pauwels - Society of / European Thermoforming Division ETD Eric Sasselaan 51, BE-2020 Antwerpen, Belgium Tel.: Fax: spe.etd@skynet.be / Niklas Magnusson, Chair Parts Committee Mission Statement It is the purpose of the European Thermoforming Division to stimulate and diffuse knowledge of all aspects of the Thermoforming industry. This will be achieved by providing conferences, training seminars and regular topical news bulletins. It will provide a dynamic network platform and encourage and promote technical and scientific participation by its members - 7 -

8 FUNDAMENTALS OF THERMOFORMING Training Course Thin and Thick Gauge Experience Level: Fundamental-Intermediate 25 April h-18.00h Peter Lichtherte, Technical Consulting & Management NH Laguna Palace Hotel Venice (Mestre), Italy Registration fee: 175 PROGRAMME 10.00h Start - General part - Basics of - Extrusion technology - Thermoforming principles - Vacuum forming - High Pressure forming - Twin sheet forming 13.00h-14.00h Lunch 14.00h Start - Basics of thermoforming - Reinforcement of thermoformed parts - Simulation Feasibility study - Importance of Design - Workshop - Presentation and discussion of Cases - Comparison of different technologies REGISTRATION FORM - please fax to or spe.etd@skynet.be Name: Company: Function: Address: Post code: Country: Fax: City: Tel: Registration fee: 175 payment by preference with money transfer Money transfer: RaboBank, Venray, Netherlands (copy attached) Account: BIC: RABO NL2U - IBAN: NL11 RABO Please charge the following credit card: Visa MasterCard - Expiry date / (m) (y) Card no. Validation code: (last 3 digits on back of card) Name Cardholder: Signature - 8 -

Classic lounge chair updated thanks to Solera-Thermoform by David Vink Thermoformed plastics play an integral part in the Avus lounge chair, designed by German studio Konstantin Grcic Industrial

9 Classic lounge chair updated thanks to Solera-Thermoform by David Vink Thermoformed plastics play an integral part in the Avus lounge chair, designed by German studio Konstantin Grcic Industrial Design (KGID) for Plank Collezioni, the furniture company located in the Italian town of Ora. The leather-cushioned chair featured among Plank exhibits at the Salone del Mobile furniture fair in Milan in April Konstantin Grcic designed the chair with the assistance from Sami Ayadi of KGID to incorporate a rigid base in matt ABS plastic. This is produced using a twinsheet thermoforming process and incorporates integrated grip recesses. The characteristic hollow interior produced in this process is filled with flame retardant polyurethane foam, which increases rigidity without adding excessive weight. However, flexibility is a feature of the seat shells and the fluted high gloss upper shell, which are made from a single 3mm thick thermoformed sheet in the same type of ABS material as the base. Grcic says the Avus chair pays tribute to the characteristic qualities of this classic furniture type: great comfort, attention to detail, fine materials and refined elegance. However, the use of modern materials processed with cutting-edge technology from the automotive and sports industry makes Avus a radical reinterpretation of the lounge classic. The combination of plastic shells with leather upholstery is said to generate an exciting diversity of surfaces and allows Avus to be produced in a wide spectrum of colour combinations, from complete monochrome to strong contrasts. With its choice of five back-shell and three base-shell colours, the lightweight Avus chair has overall dimensions of 80cm x 73cm x 73cm and is expected to be used in public lounges, offices and private homes. Solera-Thermoform Group, an Italian thermoforming company with facilities in Fucecchio and Torreglia, produced the plastic parts for the Avus chair. The July/August 2010 issue of European News reported on the company s PastItaly pasta automat project, which was also made using twinsheet thermoforming. The company s sales and marketing director Daniele Versolato said he first contacted Martin Plank and his son Michael in the second half of 2010 to discuss how the flexible, high-gloss, rear upper part envisaged in Konstantin Grcic s design could be realized in plastic. Versolato said: During the first meeting I explained to Plank that we can also have the twinsheet technology that could be evaluated for the rigid matt base. Plank then pulled in both Konstantin Grcic and Sami Ayadi of KGID to discuss the sheet and twinsheet solutions in more detail. This involved a meeting at Solera-Thermoform to give an overview of the technology to the designers, who had not been familiar with it. That meeting allowed the KGID designers to prepare a 3D design of the Avus lounge chair so that it could be produced by thermoforming. The chair s production methods are traditional vacuum forming for the top part and structural twin sheet forming from two sheet halves for the base. The 3D design was then finalized with the assistance of Solera technical staff, leading to production of both the moulds and prototype parts in January Following minor modifications, Plank and KGID decided to go into industrial production. Final moulds and the first complete chairs were ready within five weeks, well in time for the Milan furniture fair in April. Konstantin Grcic is scheduled to present a paper on the Avus chair project at the SPE European Thermoforming Division s 2012 thermoforming conference in Venice (26-27 April 2012). Other recent designs by KGID for Plank have included the Monza armchair (2009) in wood and injection moulded polypropylene back and arm rests, and the filigree net structured Myto cantilever chair (2007), a single-piece injection moulding in BASF s HighSpeed easy-flow PBT plastic

Versolato Cor Janssen Yetty Pauwels Hubert Kittelmann Gabriel Bernar Wim

Daniele Versolato Mauro Faé Gabriel Bernar Marc Ommeslagh Reinhold Plot

Pauwels Daniele Versolato Cor Janssen Kitty Beijer Michel Py Cor Janssen

/ Website Committee Chair Parts Committee Chair Parts Committee Parts

Sponsors Committee Social Chair Social Social Membership Chair Advisor

FlexTrim machines for cost-effective and conveniant thermoforming and

Eric Sasselaan 51, BE-2020 Antwerpen, Belgium Tel: +32 3 541 77 55 -

10 Thermoforming Society of and More... ETD board Members Reinhold Plot Wim De Vos Daniele Versolato Cor Janssen Yetty Pauwels Hubert Kittelmann Gabriel Bernar Wim De Vos Mauro Faé Hans Lauridsen Marek Nikiforov Jeff Pitt Henning Sandal Daniele Versolato Mauro Faé Gabriel Bernar Marc Ommeslagh Reinhold Plot Niklas Magnusson Ray Lewis Marek Nikiforov Cor Janssen Ken Braney Yetty Pauwels Daniele Versolato Cor Janssen Kitty Beijer Michel Py Cor Janssen Manfred Jacob Ken Braney Olivier Crave Chair and Councilor Chair-elect Conference Chair Treasurer Secretary and Newsletter Editor Chair Technology Committee Chair Technology Committee Technology Committee PR / Website Committee Chair Parts Committee Chair Parts Committee Parts Committee Sponsors Committee Chair Sponsors Committee Sponsors Committee Sponsors Committee Social Chair Social Social Membership Chair Advisor Advisor SPE Liaison officer FRIMO EcoForm and FlexTrim machines for cost-effective and conveniant thermoforming and milling of thick gauge parts. One Stop. All Services. More information: om SPE European Thermoforming Division Newsletter Editor - Yetty Pauwels Eric Sasselaan 51, BE-2020 Antwerpen, Belgium Tel: Fax: spe.etd@skynet.be FRIMO Group GmbH Liegnitzer Str Freilassing Tel.: +49 (0) Fax: +49 (0) info.freilassing@frimo.com

NewsLetter. A publication of SPE European Thermoforming Division

NewsLetter. A publication of SPE European Thermoforming Division Spring 2011 NewsLetter A publication of SPE European Thermoforming Division www.e-t-d.org Table of Content ETD Chair message - page 1 ETD conference - pages 2-3 Parts competition - page 4 Article Ken Braney