WB Fastener Kit (ONLY available with G5W & G5W-PRO Models)
|
|
- Dwight Higgins
- 5 years ago
- Views:
Transcription
1
2 Thank you for purchasing a Pro LIFT G5. The Pro LIFT product line is designed to enhance your interactive whiteboards and projectors or LCD. Please follow all assembly instructions correctly to provide optimal use. Only a qualified contractor should install the Pro LIFT G5. If you do not understand any of the assembly instructions, please contact your local re seller or visit. IMPROPER INSTALLATION CAN CAUSE DAMAGE TO YOUR Pro LIFT AND LEAD TO SERIOUS PHYSICAL INJURY. JORO Manufacturing cannot take any responsibility for damage or injury resulting from improper installation. Do not operate Pro LIFT G5 if there are any obstructions below or above the board. Doing so may cause unit malfunction or lead to serious physical injury. The supplied mounting hardware is for use on the Pro LIFT stands only. If you encounter any problems or insufficient hardware during installation, please contact your local re seller.
3 G5 Main Frame Kit 10x M6 x 12mm Socket Cap Screw SILVER LCD Mount Fastener Kit (ONLY available with G5L & G5L-PRO Models) 8x M6 x 20mm Socket Cap Screw Low Profile 4x 5/16x1" SILVER Button Head 8x 8x M6 x 20mm Socket Cap Screw Low Profile JORO Button Head 8x 4x 8x 5/16x1-1/2" Button Head 5/16 Hex Nut 5/16" Washer 2x 2x Wire Mgmt Molding Board Backer Support 1x 3/16" T-Handle Allen Key 5/32" Allen (Hex) Key 1x 1x 3/16" Allen (Hex) Key 5/32" Allen (Hex) Key WB Fastener Kit (ONLY available with G5W & G5W-PRO Models) 16x M6 x 8mm Socket Cap Screw 16x JORO Button Head 18x M6 x 20mm Socket Cap Screw Low Profile 4x 4x 1/4" Washer M6 Hex Nut Machine Screw Insulator 6x 6x Nylon Washer 1x M5 Allen (Hex) Key 1x 5/32" Allen (Hex) Key Note: Parts may not be exactly as shown and not to scale ProLift G5 - G5L ASSY Instructions : 0.004
4
5 Pro-LIFT G5 Foot Pro-LIFT G5 Foot 1 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Feet For ease of installation, do this step while Pro-LIFT G5 is lying down Be sure to use the 5/16x1-1/2" Button Head screws provided Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
6 M6 x 20mm Socket Cap Screw 2 Turret Head 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head Mount the Turret Head Be sure to use the M6 x 20mm Socket Cap Screws (Low Profile) provided Be sure to NOT over tighten If necessary, loosen 5/16x1" Button Head screws to align holes REMEMBER to tighten screws, but DO NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
7 3 Pro-LIFT G5 Accessory Shelf Part#: WF122412PROL M6 x 20mm Socket Cap Screw 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Accessory Shelf 5/16x1-1/2" Button Head Be sure to use the M6 x 20mm Socket Cap Screws supplied Be sure to NOT over tighten If necessary, loosen 5/16x1-1/2" Button Head screws to align holes REMEMBER to tighten screws, but DO NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
8 4 Machine Screw Insulator 1/4" Nylon Washer M6 x 20mm Socket Cap Screw Machine Screw Insulator 1/4" Nylon Washer M6 x 20mm Socket Cap Screw Mount the Pencil Tray Adapters (may not be exactly as shown) Be sure to use the following supplied parts: 1. M6 x 20mm Socket Cap Screw 2. 1/4" Nylon Washer 3. Machine Screw Insulator Do not completely tighten fasteners until pencil tray has been fastened Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
9 M6 Hex Nut 1/4" Washer 5 WB Hanger (SL-607) Part#: G5-ACC-WBH M6 Hex Nut 1/4" Washer M6 x 20mm Socket Cap Screw M6 x 20mm Socket Cap Screw 5/16x3/4" SILVER Button Head screw Be sure to tighten on both angles once WB Hanger has be installed. Mount the WB Hanger BE AWARE the mounting position of the WB Hanger is dependant on projector/white board combination Be sure to use the following supplied parts: 1. M6 x 20mm Socket Cap Screw 2. 1/4" Washer 3. M6 Hex Nut Once the WB Hanger is installed, thighten the 5/16x3/4" SILVER Button Head screws Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
10 6 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder 3/8" Washer Laptop Tray Slider Arm Laptop Tray Arm 3/8" Nylon Washer M6x8mm SILVER Button Head 5/16" Washer 5/16" Nylon Locking Nut Mount the Laptop Tray Arm (if the Laptop Tray was ordered with your product) Fasten the Laptop Tray Arm to the Laptop Tray Slider Arm using the M6x8mm SILVER Button Head Screws supplied If the 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder bolt is not fastened, follow the sequence above Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
11 7 M6x8mm SILVER Button Head Laptop Tray M6x8mm SILVER Button Head Mount the Laptop Tray (if ordered with your product) Be sure to use the fasteners from the LTT Kit Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
12 8 Mounting patterns for tested projectors Match holes in the diagram to projection system being used Fasten projector to the corresponding holes using the JORO Button Head Screws supplied Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003
13 Mount the white board Use the holes which correspond to manufacturers recommended projector to image distance Fasten using the JORO Button Head screws supplied Be sure to NOT over tighten 9 Note, there are drilled/tapped holes on the frame upright, if lowering the board is required JORO Button Head Mount the Wire Mgmt Molding Mount the Board Backer Support Remove the backing from the double sided tape and attach to outer edge of upright JORO recommends attaching the Board Backer Supports supplied JORO recommends attaching the Wire Mgmt Moldings supplied Remove the backing from the double sided tape and attach to side of frame upright Board Backer Support Wire Mgmt Molding Laptop Tray (if ordered with your product) ProLift G5 - G5W ASSY Instructions : 0.003
14 10
15
16 Pro-LIFT G5 Foot Pro-LIFT G5 Foot 1 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Feet For ease of installation, do this step while Pro-LIFT G5 is lying down Use the 5/16x1-1/2" Button Head screws provided Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
17 2 Pro-LIFT G5 Accessory Shelf Part#: WF122412PROL M6 x 20mm Socket Cap Screw 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Accessory Shelf 5/16x1-1/2" Button Head Use the M6 x 20mm Socket Cap Screws supplied Do NOT over tighten If necessary, loosen 5/16x1-1/2" Button Head screws to align holes REMEMBER to tighten screws, but DO NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
18 Pro-LIFT LCD ARM 3 5/16x1" SILVER Button Head Pro-LIFT LCD ARM 5/16x1" SILVER Button Head Pro-LIFT LCD ARM Remove Pro-LIFT LCD Arms Remove 5/16x1" SILVER Button Head screws and store in safe place to re-use once LCD is installed. Remove Pro-LIFT LCD Arms ProLift G5 - G5L ASSY Instructions : 0.004
19 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16 Hex Nut 5/16x1" SILVER Button Head 4 5/16 Hex Nut G5-ACC-PT5 5/16x1" SILVER Button Head 5/16 Hex Nut 5/16x1" SILVER Button Head Fasten the 5/16x1" SILVER Button Head screws to the G5-ACC-PT5 Be sure to NOT over tighten 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16 Hex Nut G5-ACC-PT5 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16x1" SILVER Button Head When fastened end result should resemble this ProLift G5 - G5L ASSY Instructions : 0.004
20 800 VESA 600 VESA 400 VESA 200 VESA 200 VESA 400 VESA 600 VESA 800 VESA 5 Please use the appropriate mounting holes for your LCD (not included) as shown above G5-ACC-PT5 G5-ACC-PT5 LCD fastener from LCD TV kit provided Fasten the G5-ACC-PT5 to your LCD (not included) using the fasteners from the LCD TV Kit. Use the appropriate fasteners as specified in the LCD owners manual Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
21 6 Pro-LIFT LCD ARM 5/16" Washer Narrow 5/16 Hex Nut 5/16 Hex Nut 5/16" Washer Narrow 5/16 Hex Nut 5/16" Washer Narrow Pro-LIFT LCD ARM 5/16 Hex Nut 5/16" Washer Narrow Mount the Pro-LIFT LCD Arms to G5-ACC-PT5 tubes Mount the Pro-LIFT LCD Arms prior to hanging on the Pro-LIFT G5L Use the fasteners supplied Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
22 Pin 7 Pin 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head Hang the LCD Assembly Hang on all four (4) pins on uprights If necessary, loosen the 5/16x1" Button Head screws to align holes REMEMBER to tighten screws, but do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
23 8 5/16x1" SILVER Button Head 5/16x1" SILVER Button Head Secure Pro-LIFT LCD Arms to Pro-LIFT G5L Frame Use the 5/16x1" SILVER Button Head screws that were removed earlier Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
24 9 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder Bolt 3/8" Washer Laptop Tray Slider Arm Laptop Tray Arm 3/8" Nylon Washer 5/16" Washer M6x6mm Button Head 5/16" Nylon Locking Nut Mount the Laptop Tray Arm (if the Laptop Tray was ordered with your product) Fasten the Laptop Tray Arm to the Laptop Tray Slider Arm using the M6x6mm Button Head Screws supplied If the 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder Bolt bolt is not fastened, follow the sequence above Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
25 10 M6x6mm Button Head Laptop Tray M6x6mm Button Head Mount the Laptop Tray (if ordered with your product) Use the fasteners from the LTT Kit Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
26 11 Cable Tray #12 x 5/8" Pan Head Wood Screw Mount the Cable Tray (if ordered with your product) Use the #12 x 5/8" Pan Head Wood Screws supplied Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004
27 12 Wire Mgmt Molding Laptop Tray (if ordered with your product) Mount the Wire Mgmt Molding JORO recommends attaching the Wire Mgmt Moldings supplied Remove the backing from the double sided tape and attach to side of frame upright ProLift G5 - G5L ASSY Instructions : 0.004
28 12
Hatch Whiteboard: Portable Stand Installation Instructions
Hatch Whiteboard: Portable Stand Installation Instructions Remove Projector Wall Plate 1. Open the wall mount for the projector. 2. Remove the shipping screw from the front center of the mount arm. 1 P
More information3 wide x 3 deep Video Wall Display Installation Guide
HoverTrack Series 3 wide x 3 deep Video Wall Display Installation Guide VWD-3X3-X462 This display kit mounts NEC X461UN and X462UNS LCD monitors in a 3 wide by 3 deep landscape configuration. The frame
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationINSTALLATION GUIDE. Model:B60 RECESSED IN WALL MOUNT
INSTALLATION GUIDE Model:B60 RECESSED IN WALL MOUNT Features: Installs between 16 (406mm) wood stud centers Mounting Pattern Compliance: VESA 100*100mm up to 600 x 400mm Level 5 degree horizontal adjustment
More informationSmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide
SmartView Mounting Frame 3 Wide x 3 Deep Video Wall Display Installation Guide WMK-034 This display kit mounts ViewSonic 46 Video Wall displays in a 3 wide by 3 deep landscape configuration. The frame
More informationINSTALLATION GUIDE 8IWBM-EL. phone: (02) fax: (02)
INSTALLATION GUIDE 8IWBM-EL www.gilkon.com.au email: sales@gilkon.com.au phone: (02) 99140900 fax: (02) 99140901 CONTENTS 1. DISCLAIMER Page 2 2. WARNINGS & SAFETY INSTRUCTIONS Page 3 3. PACKAGE CONTENTS
More informationOWNER'S MANUAL. Parts list Check that all of the following items are present ENGLISH GERMAN FRENCH ITALIAN SPANISH. Before installation.
Contents Before installation Installation OWNER'S MANUAL Parts list Check that all of the following items are present MANUAL No. 090003-3230A700 Thank you for purchasing this product. Please read this
More information4099T Parts List. Front Bow Assy. (1) Rear Bow Assy. (1) Long Mounting Rail (2) Short Mounting Rail (2)
4099T Parts List Ver.2 Front Bow Assy. (1) Rear Bow Assy. (1) Small Mnt Foot (2) Large Mount Foot (2) Ladder Hook (2) Ladder Stop (2) Handle Extension (1) Long Mounting Rail (2) Short Mounting Rail (2)
More informationEZ BALANCER II. Please note: The hardware and accessories listed may not be the same as shown. We are always improving the product.
Parts List EZ BALANCER II 2ea. Aluminum Angle Base Frame Members. 2ea. 1/2"x1" Aluminum Angle Cross Frame Members. 2ea. Aluminum Uprights. 2ea. Aluminum Cradles. 4ea. Rubber Cradle Guards. 4ea. Rubber
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationProjector Flush Mount
Projector Flush Mount ABtUS SIGAPORE PTE LTD Model: AV819 www.abtussingapore.com Patent Pending Revision 21/05/2012 ABtUS SINGAPORE PTE LTD www.abtussingapore.com User Operation Guide IMPORTANT NOTES Thank
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationATTACH WALL PLATE TO WALL
DANGER! The Elite ar m contains high p r e s s u r e g a s s p r i n g s. T h e following cautions MUST be observed to avoid serious injury. 1. Do not attempt to adjust your Elite arm until everything
More informationInstalling flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
More informationFor additional assistance call
The following pages will help guide you through the process of assembling your new 48 custom prize wheel. Choose an assembly area with plenty of room to lay your pieces on the floor and also a bench or
More information40993 Parts List. Front Bow Assy.(1) Rear Bow Assy.(1)
40993 Parts List Front Bow Assy.(1) Rear Bow Assy.(1) Rail Mnt Foot(4) Ladder Hook (2) Ladder Stop (2) Mounting Clip-ProMaster Only (6) Mounting Bracket(6) Long Mounting Rail(2) Short Mounting Rail(2)
More informationTP4463. ASSeMBly INSTruCTIONS FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3
TP63 FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3 Flat Panel TV Stand Stand with TV Mounting System Stand with Wall Mount ASSeMBly INSTruCTIONS for your safety, please follow these precautions:!
More informationCable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
More informationAssembly Instructions. Table of Contents
HQ Little Foot Assembly Instructions Back of Handi Quilter, Inc. 501 North 400 West North Salt Lake, UT 84054 1-877-697-8458 Front of 2015 Handi Quilter, Inc. www.handiquilter.com Printed in the United
More informationFORD RANGER Onwards SLIMLINE II RACK (1255MM x 1358MM)
FORD RANGER - 2012 Onwards SLIMLINE II RACK (1255MM x 1358MM) FAFR001 / KRFM010T INSTALL TIME: 60 mins READ ME FIRST: Thank you for purchasing a Front Runner Slimline II Rack. This Roof Rack consists of
More informationAssembly InstructIons
tp50 FLAT PANEL TV MOUNTING SYSTEM OPTION OPTION 2 OPTION 3 Flat Panel TV Stand Stand with TV Mounting System Stand with Wall Mount Assembly InstructIons for your safety, please follow these precautions:!
More informationHILGARD Part Number Spectrum Lane ~ Missoula MT ~
HILGARD Part Number 20121 7100 Spectrum Lane ~ Missoula MT 59808 800.791.8056 ~ www.spectrumproducts.com 20121 Rev A You have purchased a Spectrum Products Hilgard Guard Chair. Providing the unit is installed
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationAdjustable Wall Mount and Adjustable Mobile Stand for the PolyVision PJ920 Ultra-Short Throw Projector. Installation Guide
Adjustable Wall Mount and Adjustable Mobile Stand for the PolyVision PJ920 Ultra-Short Throw Projector Installation Guide Part number 2002553-001 Rev A 2011 PolyVision Corporation All rights reserved Table
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationXceed ASSEMBLY MANUAL
Xceed ASSEMBLY MANUAL Table of Contents / Registration Congratulations on your commitment to fitness and your purchase of the Bowflex Xceed home gym. Before assembling your Bowflex Xceed home gym please
More informationStar Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
More informationFirst Team, Inc. WallMonster Series. Installation Instructions
First Team, Inc. WallMonster Series Installation Instructions Bill of Materials A (1) Wall Bracket B (2) Upper Extension Arms C (1) Lower Extension Arm Assembly D (1) H-Frame Backboard Mount E (1) 5/8
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationAssembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
More informationVolkswagen T5 Transporter FAVT001 / KRVK004T / KRVK005T
Volkswagen T5 Transporter 2003-2015 FAVT001 / KRVK004T / KRVK005T INSTALL TIME: 1 Hour READ ME FIRST: Thank you for purchasing a Front Runner Slimline II Rack. This Roof Rack consists of a kit that contains:
More informationThis manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4
More informationAssembly Instructions for Model: VMPL3
Assembly Instructions for Model: VMPL3 Thank you for choosing a Sanus Systems VisionMount Wall Mount. The VMPL3 is designed to hold 27-84 Flat Panel LCD or Plasma Displays weighing up to 280 lbs. It will
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Single QuickStand Lite Parts A (1) Lower Arm A B C D B (1) Upper Arm C (1) Base D (1) Base Plate E (1) M8 Dynamic Arm Long F (1) Clamp Bracket G H (1) VESA Plate
More informationMANUAL e130. Wallstation
MANUAL 07.29.13 e130 Wallstation The Enovate Medical e130 Wallstation was designed to set a new standard in quality. Enovate Medical s goal is to provide a wallstation that is ready for years of use,
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationINSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320
INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays The FMA-220 and FMA-320 pivot array allow both horizontal and vertical display pitch adjustment. The pitch adjustment range is 30 (15 up / 15
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationHigh Density Sports Storage
Owner s Manual High Density Sports Storage CONTENTS Safety...........................................2 General......................................2 Installation...................................2 Usage.......................................2
More informationETX Powered Loudspeaker Accessories
ETX Powered Loudspeaker Accessories ETX-BRKT10, ETX-BRKT12, ETX-BRKT15, ETX-TCA-S, ETX-TCA-L, and ETX-BRKT35 en Installation Guide en 3 Table of contents 1 Safety 4 2 Installation 6 2.1 Wall mount bracket
More informationINSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS
INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS The Universal Interface Bracket provides a solution for simplifying inventory of RPA and RPM series mounts and SLB/SLM projector brackets.
More informationInstallation and Assembly: LCD UPRIGHT STAND FOR PEDESTAL CABINETS
Installation and Assembly: LCD UPRIHT STAND OR PEDESTAL CABINETS Part Number 49-5672-30 EATURES Take all of the guess work out of selecting the proper stand for your pedestal cabinets. This custom stand
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationēno one Adjustable Wall Mount and Adjustable Mobile Stand Installation Guide
Installation Guide Part number 2002105-001 Rev B 2011 PolyVision Corporation All rights reserved Table of contents Overview... 3 Important considerations... 3 Adjustable Wall Mount considerations... 3
More information19 to 39 TV WALL MOUNT - FULL MOTION
19 to 39 TV WALL MOUNT - FULL MOTION RF-HTVMMAB For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...5
More information**MOUNTING YOUR MONITOR
FPP72V200 72 FREE STANDING DISPLAY CART Assembly Instructions Hardware List Ref. Qty. Part No. Description AA 4 030-1128 1/4-20 UNC, 1 3/4 Socket Hd Screws BB 1 030-1129 5/8-11 UNC 1 3/4 Socket Hd Screw
More informationMobile TV Cart Instruction Manual SKU: STAND-TV03E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv03e
More informationSmall Above Fireplace Pull-Down Full-Motion TV Wall Mount
Small Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 33123 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationPSM-144X SMITH MACHINE. Owner s Manual
SMITH MACHINE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationFlat Panel TV Cart Instruction Manual SKU: STAND-TV02D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv02d
More informationOB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount
INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationPVKC-83X. Owner s Manual VERTICAL KNEE RAISE
VERTICAL KNEE RAISE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each
More informationSMITH STRENGTH TRAINING SYSTEM INSTRUCTION MANUAL MODEL : F410
SMITH STRENGTH TRAINING SYSTEM INSTRUCTION MANUAL MODEL : F0 QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts,
More informationDRAWER Volkswagen amarok
DRAWER Volkswagen amarok SSDS301 / SSVA001 INSTALL TIME: 1 Hour Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System -
More informationEPPA2-KIT DUAL MONITOR ARM CONVERSION
EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationThis Folding Shelf Kit will work in conjunction with our Swing Away Carrier Kit allowing you add additional exterior storage space to your Vanagon.
Rocky Mountain Westy Folding Shelf Kit Assembly & Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Folding Shelf Kit. We pride ourselves in the products we develop
More informationWEIGHT ADJUSTABLE ESPREE. Model 2ESP-WA-C48- Model 2ESP-WA-C60- 2ESP-WA Rev B 8/17 ASSEMBLY AND OPERATION
WEIGHT ADJUSTABLE ESPREE PNEUMATIC TABLE BASE 2ESP-WA Rev B 8/17 Model 2ESP-WA-C48- Model 2ESP-WA-C60- = SLV, BLK or WHT ASSEMBLY AND OPERATION PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationPROFILE Flat Panel Console System Installation Manual
PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double
More informationOPERATIONS MANUAL. Port-O-Slitter
Tapco Products Company The World Leader in Specialty Tools for the Professional Port-O-Slitter OPERATIONS MANUAL General instructions, set up, accessories and guide to using your portable precision slitting,
More informationINSTALLATION MANUAL PBL-UMP
INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...
More informationModel Name: ROY6609B. Installation Instructions. Hardware Bags. Imp o r t a n t N o t e s. Component Checklist P.1
P.1 Imp o r t a n t N o t e s Installation Instructions Model Name: ROY6609B I n s t al l a t i o n w il l r e q u i r e a m i n i m u m o f t w o p e o p l e. U n d e r n o c i r c u m s ta n c e s s
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationPVLP-156X. Owner s Manual VERTICAL LEG PRESS
VERTICAL LEG PRESS Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationPSC-43X. Owner s Manual SEATED CALF RAISE
SEATED CALF RAISE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationI NSTALLATION M ANUAL
Universal PVS Kit Star Trac Fitness E-TR, E-TBT, E-RB, and E-UB S-TR, S-TBT, S-RB, and S-UB I NSTALLATION M ANUAL STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 1 TABLE OF CONTENTS Introduction...4 Before
More informationAssembly Instructions for Model: VMPR1
Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP
More informationTOYOTA TACOMA SLIMLINE II RACK ( 1165MM x 1358MM)
TOYOTA TACOMA SLIMLINE II RACK ( 1165MM x 1358MM) FATT001 / KRTT001T INSTALL TIME: 60 mins READ ME FIRST: Thank you for purchasing a Front Runner Slimline II Rack. This Roof Rack consists of a kit that
More informationAS-TX86. Please read these instructions carefully before using. This model will hold most Flat Panel TVs. Load capacity: 60kg (132Lbs).
AS-TX86 Please read these instructions carefully before using. This model will hold most 52-84 Flat Panel TVs. Load capacity: 60kg (132Lbs). AS-TX86 Information Please read these instructions carefully
More informationINSTALLATION MANUAL PBC-UMS
INSTALLATION MANUAL. PBC-UMS Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com Rev. 01 PBL-110 Projector Mount Page 2 Installation
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationinstallation guide 1 GUIDE#: pwb-wwtowv1-pol-003
g300 WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationSM-RAZOR-ART2-L / SM-RAZOR-ART2-XL
SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2004. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JANUARY 2004 RF500A RF507A RF514A RF521A RF501A RF508A RF515A RF522A RF502A
More informationUniversal Projector Ceiling Mount Model: DPM-45
Universal Projector Ceiling Mount Model: DPM-45 Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented within this
More informationinstallation guide 1 GUIDE#: pwb-assault-004
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationFML64S ASSEMBLY INSTRUCTIONS
FML64S ASSEMBLY INSTRUCTIONS Please read this instruction manual carefully before assembly Fits 42-84in plasma and LCD TVs Weight Capacity 60kg (32lbs) MetraHomeTheater.com 866-839-987 460 Walker Street
More informationInstalling the Profile Privacy Panel. Assemble top mounting bracket. Prerequisites. Tools
Installing the Profile Privacy Panel Complete these instructions to install the Profile Privacy Panel. Privacy panels are available in various heights to match tiers and include mounting hardware for slat
More informationWARNING. Installation and Assembly - Vision Point Height Adjustable Desktop Mount with Stationary Base for LCD Screens
Installation and Assembly - Vision Point Height Adjustable Desktop Mount with Stationary Base for LD Screens IMPORTANT! Read entire instruction sheet before you start installation and assembly. Models:
More informationEKX Full-Range Loudspeaker Accessories
EKX Full-Range Loudspeaker Accessories EKX-BRKT12, EKX-BRKT15, and EKX-TCA en Installation Note en 3 Table of contents 1 Safety 4 1.1 Safety point 6 2 Installation 7 2.1 Wall mount bracket 7 2.2 Truss
More informationMONOPRICE. Above Fireplace Pull-Down Full-Motion TV Wall Mount. User's Manual P/N 27773
MONOPRICE Above Fireplace Pull-Down Full-Motion TV Wall Mount P/N 27773 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 4 FEATURES... 4 CUSTOMER SERVICE... 4 PACKAGE CONTENTS...
More informationWarnings. Description. Prior to Installation Tools Needed
Warnings Failure to act in accordance with the following may result in death or personal injury. The JT Strong Arm Stabilizer System is intended to eliminate chassis movement in travel trailers and fifth
More informationDRAWER Mitsubishi pajero lwb
DRAWER Mitsubishi pajero lwb SSDS601 / SSMP001 INSTALL TIME: 45 mins Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System
More informationABM International, Inc.
ABM International, Inc. Lightning Stitch required 1 1.0: Parts List head and motor assembly (Qty. 1) Reel stand (Qty. 1) Needle bar frame clamp (Qty. 1) Motor drive (Qty. 1) 2 Cable harness with bracket
More informationLCD MONITOR/TV WALL MOUNT
INSTALLATION INSTRUCTIONS LCD MONITOR/TV WALL MOUNT DUAL DESK CLAMP (RFCD-110) S CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION
More informationB B B
Winchester SXP Gauge Tactlite Six Position Adjustable Shotgun Stock with Scorpion Recoil System B..0.00 B..0.00 B..0.00 Removable/Adjustable Tactical Cheekrests X Scorpion Recoil Pad Dual Sided QD Attachment
More informationArducopter 3DR-B Hardware
Arducopter 3DR-B Thank you for purchasing an Arducopter 3DR kit. The Arducopter 3DR is a stable and supported quadrotor frame in the ongoing development of the Arducopter code on DIYDrones. It features
More information4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET
D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with
More informationPM4S3 Monitor Kiosk. features and benefits: dimensions: additional information:
PM4S3 Monitor Kiosk PM4S3-MK-M PM4S3-MK-L Kiosk displays are portable and easy to assemble. The aluminum extrusion frame features cam locks, tension glide connections and medium or large monitor mounts.
More informationInstallation & Operations Manual 2 Piece Hood Rack for Polaris Ranger With Pro-Fit Roll Cage
Installation & Operations Manual 2 Piece Hood Rack for Polaris Ranger With Pro-Fit Roll Cage Part Number #08071 Installation information: This product has an installation rating of: Easy Approximate installation
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationPhone #: (360) Online Tech Support: Web: Inventory
WM1104 Router Bit Display Cabinet Instruction Sheet Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz Shipment 1 Inventory Shipment 1: Cabinet... 1 Plexiglass Door...
More informationinstallation guide 1 GUIDE#: pwb-assault-001
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationToyota Prado 150 / LEXUS GX460 SLIMLINE II RACK ( 1255MM X 1964mm)
Toyota Prado 150 / LEXUS GX460 SLIMLINE II RACK ( 1255MM X 1964mm) FATP001 / KRTP011T / KRLE007T INSTALL TIME: 1 Hour READ ME FIRST: Thank you for purchasing a Front Runner Slimline II Rack. This Roof
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationFlat Panel Mobile Cart and Accessories
INSTALLATION MANUAL Flat Panel Mobile Cart and Accessories Optional Accessories TCH01 TDV01 TLP01 TCR01 Note: The accessories are not standard. The accessories will be selected according to user requirement.
More informationThank you for purchasing our product! *Please read these instructions and follow them step by step.*
07/07/08.rev1 PAGE 1 OF 11 601AL VERTICAL 60120VL LIFT W/CHAIN DRIVE WINCH Thank you for purchasing our product! *Please read these instructions and follow them step by step.* Step 1. Separate and group
More informationHQ Pole Upgrade Kit for HQ Adjustable Table and HQ QuilTable Assembly Instructions 1
HQ Pole Upgrade Kit for HQ Adjustable Table and HQ QuilTable Assembly Instructions QF09775 The pole upgrade kit can be used with or without the QF09700 HQ Precison-Glide track upgrade kit. What s Included
More information