PROFILE Flat Panel Console System Installation Manual

Size: px
Start display at page:

Download "PROFILE Flat Panel Console System Installation Manual"

Transcription

1 PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double Sided/Single Unit Single Sided/Multiple Unit... 9 Double Sided/Multiple Unit Single Sided Concave..11 Single Side Convex..12 Ergonomic Worksurfaces.13 Upright/Docker Assembly 14, 15, 16 Swivel CPU Caddy.17, 18 Core To Core Assembly (linear)... 19, 20 Core To Core Assembly (concave).21, 22, 23, 24, 25, 26 Core To Core Assembly (convex)...27, 28, 29, 30, 31,32 Flat Panel Display (FPD) Wall Assembly...33, 34, 35 Modular Wall Options.36, 37, 38, 39 Heavy Duty Lift...40, 41, 42, 43, 44, 45 Dual Lift Corner..46, 47, 48, 49, 50, 51 Linear Lift..52, 53, 54, 55, 56, 57, 58, 59, 60 Worksurface Assembly 61, 62, 63, 64 Trim/Panels Assembly...65, 66, 67, 68, 69, 70, 71, 72, 73 Desktop Modular Rackmount..74, 75, 76, 77, 78, 79 Monitor Arms And Accessories..80, 81, 82, 83 Fans..80, 81 Power.82 Flat Panel Display Arms...83 Product specifications are subject to change without notice Rev. D (6/4/04)

2 INTRODUCTION Profile Console System Introduction Thank you for selecting the Profile Console System from Wright Line. You are installing the most advanced modular technical furniture system designed for interactive monitoring and technologies based on LCD flat panel displays. Please take the time to review this manual to ensure an efficient and safe installation of our products. The beauty of Profile is its simplicity in space planning, assembly and technology integration. This manual is dedicated to the installation of the furniture system itself. We recommend that you have plan drawings of your Profile configuration and an equipment list (or shipping list) of Profile components. Profile is manufactured in Worcester, Massachusetts, from our world-class manufacturing center for technical furniture and made to your specifications. 2

3 Important Safety Information STOP! BEFORE YOU BEGIN TO UNPACK Before you begin to unpack your Profile Flat Panel Display System components, please read the following paragraphs. Attention to these warnings will help prevent personal injuries and damage to the products. WARNING The Profile components can be very heavy. To minimize the possibility of personal injury and damage to the product, it is strongly recommended that several people take part in the unpacking and moving process. When lifting units, there should be at least one person for every 40 lbs. of weight to be lifted. WARNING Tier 2 and tier 3 add-on walls can be very heavy. When assembling tier 2 and tier 3 add-on walls, ensure that there is an adequate number of people on hand to lift these units. WARNING During installation, care should be taken when sliding cores along the floor. Three tier units, in particular, are susceptible to tipping. WARNING In seismically active areas, all Profile installations must be securely fastened to the floor. WARNING Do not, under any circumstance, stand on Profile worksurfaces. WARNING Do not place any loads in excess of 300 pounds ( kg) on each 72 ( cm) of linear worksurface. WARNING Do not stand on Profile worksurfaces to load monitors. 3

4 INSTALLATION OVERVIEW Tools That You Will Need: Level 11/16 Nut Driver (or Socket Wrench) 5/8 Nut Driver ( or Socket Wrench) 5/32 Allen Wrench 1-3/8 Open End Wrench (for leveling glide adjustment) Phillips Head Screwdriver Rubber Mallet Fasteners That You Will Be Using: # /16-18 x 1.00 Hex Head Bolt # /16 Washer #89377 M8 x 40 S.S. Phillips Flat Head Screw #89714 M6 x 14 S.S. Hex Flat Head Screw # /4-20 x 1/2 Hex Washer Head Screw # /16 Lock Washer # x 3/8 Phillips Pan Head Thread Forming Screw #68374 #8AB x 1/2 Phillips Pan Head Screw #59103 #10-32 x 3/4 Phillips Pan Head Thread Forming Screw # /4-20 Kep Hex Nut # /4-20 x 3/4 Phillips Head Machine Screw #88599 Door Strike # /4-20 x 1/2 Button Head Screw #88598 Door Latch #82555 #10-24 x 1/2 Phillips Flat Head Thread Forming Screw 4

5 INSTALLATION OVERVIEW Installation Sequence 1. Read the Important Safety Information in the Proceeding Section. Reference pages Attach the Uprights and / or Equipment Dockers. Reference pages Attach the CPU Caddy. Reference pages Assemble Core and Wedge Connector configurations. Reference pages Attach the Flat Panel Display Walls. Reference pages Modular Wall Options. Reference pages Install Ergonomic Worksurfaces. Reference pages Install Worksurfaces. Reference pages Attach the Trim and optional Privacy Screens. Reference pages Install Modular Rackmount. Reference pages Install Flat Panel Display Arms. Reference page Install optional Cooling Fans. Reference pages Install optional Power Accessories. Reference page 82 Select from the sample configurations on the following pages which best represent your Profile System. Refer to the Icons on the bottom of the pages to guide you through the assembly sequences. Typical configurations : Single Sided - Single Unit Single Sided - Multiple Units Double Sided - Single Unit Double Sided - Multiple Units Single Side - 45 and 15 Concave Multiple Units Single Side - 45 and 15 Convex Multiple Units Ergonomic Worksurfaces 5

6 INSTALLATION OVERVIEW TYPICAL CONFIGURATIONS SINGLE SIDED/SINGLE UNIT See page 7 DOUBLE SIDED/SINGLE UNIT See page 8 SINGLE SIDED/MULTIPLE UNIT See page 9 DOUBLE SIDED/MULTIPLE UNIT See page 10 SINGLE SIDED 45º & 15º CONCAVE MULTIPLE UNITS See page 11 SINGLE SIDED 45º & 15º CONVEX MULTIPLE UNITS See page 12 ERGONOMIC WORKSURFACES See page 13 6

7 SINGLE SIDED- SINGLE UNIT Refer to the pages on the Icons below for the detailed assembly sequences. SINGLE SIDED UPRIGHT / DOCKER See page 14 FPD WALL See page 33 CORE TO CORE See page 19 WORKSURFACE See page 61 TRIM / PANELS See page 65 7 ACCESSORIES See page 83

8 DOUBLE SIDED- SINGLE UNIT Refer to the pages on the Icons below for the detailed assembly sequences. For Double Sided units, repeat assembly sequence for Single Sided on opposite side. DOUBLE SIDED UPRIGHT / DOCKER See page 14 CORE TO CORE See page 19 FPD WALL See page 33 WORKSURFACE See page 61 TRIM / PANELS See page 65 ACCESSORIES See page 83 8

9 SINGLE SIDED- MULTIPLE UNITS Refer to the pages on the Icons below for the detailed assembly sequences. SINGLE SIDED MULTI UNITS UPRIGHT / DOCKER See page 14 CORE TO CORE See page 19 FPD WALL See page 33 WORKSURFACE See page 61 TRIM / PANELS See page 65 9 ACCESSORIES See page 83

10 DOUBLE SIDED- MULTIPLE UNITS Refer to the pages on the Icons below for the detailed assembly sequences. For Double Sided units, repeat assembly sequence for Single Sided on opposite side. DOUBLE SIDED MULTI UNITS UPRIGHT / DOCKER See page 14 CORE TO CORE See page 19 FPD WALL See page 33 WORKSURFACE See page 61 TRIM / PANELS See page ACCESSORIES See page 83

11 CONCAVE UNIT Refer to the pages on the Icons below for the detailed assembly sequences. CONCAVE CONFIGURATION UPRIGHT / DOCKER See page 14 CORE TO CORE See page 19 FPD WALL See page 33 WORKSURFACE See page 61 TRIM / PANELS See page ACCESSORIES See page 83

12 CONVEX UNIT Refer to the pages on the Icons below for the detailed assembly sequences. CONVEX CONFIGURATION UPRIGHT / DOCKER See page 14 CORE TO CORE See page 19 FPD WALL See page 33 WORKSURFACE See page 61 TRIM / PANELS See page ACCESSORIES See page 83

13 Ergonomic Worksurfaces Refer to the pages on the Icons below for the detailed assembly sequences. ERGONOMIC WORKSURFACE HEAVY-DUTY LIFT ERGONOMIC CORNER WORKSURFACES See page 40 DUAL LIFT ERGONOMIC CORNER WORKSURFACES See page 46 SINGLE LIFT ERGONOMIC LINEAR WORKSURFACES See page 52 13

14 UPRIGHT / DOCKER ASSEMBLY Notes: 1.) Assemble the Uprights and /or Dockers to the core frame first, to stabilize a Core. 2.) For Double Sided configurations, repeat the following sequences for the opposite side of the unit. To assemble the Uprights to the Core: Reference figure 1. Install the Uprights to the Core. Insert the hooks on the rear of the Uprights into the slots in the Core Frame and push down. Tap the top of the Uprights with a plastic mallet to ensure that the hooks are firmly seated. (See Figure 1). Install three 1/4-20 x 1/2 hex head screws into each Upright to lock them in place. Flange Left hand upright Hooks (3) 1/4-20 x 1/2 Hex head screws Flange Slots Profile core Right hand upright Figure 1 14

15 UPRIGHT / DOCKER ASSEMBLY Cont. Notes: For Double Sided configurations, repeat the following sequences for the opposite side of the unit. To assemble the Docker to the Core: Reference figure 2. Align Docker(s) with frame according to the Plan Layout. Install three 1/4-20 x 3/4 phillips pan head screws, from the inside of the Docker, into the Core Frame as shown. Secure the 1/4-20 x 3/4 phillips pan head screws to the Core using three 1/4-20 kep hex nuts inside Core Frame as shown. 1/4 20 X 3/4 Phillips head pan head screw 1/4-20 Kep Hex nut (2) 1/4-20 Kep hex nuts (2) 1/4 20 X 3/4 Phillips pan head screws Figure 2 15

16 UPRIGHT / DOCKER ASSEMBLY Cont. Install Core / Foot Re-enforcement Bracket using the 1/4 20 x 1/2 hex washer head screws (four each bracket) as shown in figure 3. Note: One Bracket is required wherever a Upright is located. (4) 1/4 20 x 1/2 Hex washer head screw 10953X - Core / Re-enforcement bracket (required where Upright is located ) Figure 3 16

17 SWIVEL CPU CADDY ASSEMBLY To assemble the Swivel CPU Caddy: (reference figures 4, 5, 6 &7) Install four 1/4-20 x 1/2 hex washer head screws partially into the appropriate holes in the core. The screws should protrude at least 1/16. Reference figure 4. Lower the caddy mounting bracket slots onto the screws. Reference figure 5. Core (4) 1/4-20 x 1/2 hex washer head screws (protruding 5/64 ) (4) 1/4-20 x 1/2 hex washer head screws Figure 4 Core Mounting bracket slots Screws Swivel CPU Caddy Figure 5 17

18 SWIVEL CPU CADDY ASSEMBLY Cont. Note: Use strap to secure CPU within Caddy. Install two 1/4-20 x 1/2 hex washer head screws at the top of the mounting bracket. Tighten all four screws. Reference figure 6. Lower the End Bracket onto the previously installed screws at the bottom of the core and then install two 1/4-20 x 1/2 hex washer head screws at the top of the bracket. Align top of End Bracket with top of Caddy. Tighten all four screws. Reference figure 7. Core (2) 1/4-20 x 1/2 hex washer head screws Mounting bracket slots CPU Caddy Slots Figure 6 (2) 1/4-20 x 1/2 hex washer head screws Core End bracket End bracket Screws Figure 7 18

19 CORE TO CORE ASSEMBLY (linear) Notes: A Transition Upright is required between the connection of every linear core section, see page 18. For Double Sided configurations, repeat the following sequences for the opposite side of the unit. To assemble multiple Cores together: Reference figures 8. Align Cores according to the Plan Layout. Attach & Secure Cores using four 1/4-20 x 1/2 hex washer head screws and four 1/4-20 hex kep nuts as shown. Reference figure 8. Profile core (4) 1/4-20 x 1/2 Hex washer head screw (4) 1/4-20 Hex Kep nuts Figure 8 19

20 CORE TO CORE ASSEMBLY (linear) Cont. Note: A Transition Upright is required between the connection of every linear core section, see below. To assemble the Transition Upright to the Cores: Reference figure 9a and 9b. First assemble Cantilever Supports to Transition Upright, left and right side. Reference figure 9a. Align the Transition Upright Assembly with the holes in the Core frames as shown. Reference figure 9b. Secure using six 1/4-20 button head cap screws and six kep nuts. Tighten securely. Reference figure 9b. (8) 1/4-20 button head cap screws Cantilever Supports (8) Lock washers Transition Upright Figure 9a (6) 1/4-20 Hex kep nuts (6) 1/4-20 button head cap screws Transition Upright assembly Levelers Figure 9b Levelers 20

21 CORE TO CORE ASSEMBLY (concave) Note: Two people are required when assembling Core/Walls. 15º Angle is shown; also applies to 45º concave configurations as well as 90º, 180º and 360º Connectors. To connect multiple Cores (with tiers and without): Reference figures 10a and 10b. Note: On concave and convex units with FPD Walls, FPD Walls need to be attached to cores and FPD Walls before wedge components can be installed. See pages 33, 34 and 35. Align Front Panel with front of Core/Wall. Reference figure 10a. (Note: Upright location on Core indicates front reference.) Secure Front Panel to Cores using six 1/4-20 x 1/2 hex washer head screws. Reference figure 10b. Front Panel (6) 1/4-20 x 1/2 Hex washer head screws Core Figure 10b Core See figure 10a Figure 10a 21

22 CORE TO CORE ASSEMBLY (concave) Cont. To connect multiple Cores (with tiers and without): Reference figure 11. Assemble two Horizontal Connector Plates to the cores as shown using eight 1/4-20 x 1/2 hex washer head screws in two locations. Reference figure 11. Front Panel Horizontal Connector Plates (8) 1/4-20 x 1/2 Hex washer head screws Figure 11 22

23 CORE TO CORE ASSEMBLY (concave) Cont. Note: Wedge Upright is required for both 15º and 45º Wedge Connector. 90º, 180º and 360º do not require Uprights. To assemble the Wedge Upright to the Wedge Front Panel: Reference figures. 12a and 12b. Note: On concave and convex units with FPD Walls, FPD Walls need to be attached to cores and FPD Walls before wedge components can be installed. See pages 33, 34 and 35. First assemble Cantilever Supports to Wedge Uprights, left and right side. Reference figure 8. Align the holes in the back of the Wedge Upright with the holes in the Wedge Front Panel. Secure using three 1/4-20 x 1/2 hex head screws. See Figure 12b. (8) 1/4-20 button head cap screws Cantilever Supports Wedge Upright (8) Lock washers Figure 12a (6) 1/4-20 x 1/2 Hex washer head screws Wedge Upright Front Panel Figure 12b 23

24 CORE TO CORE ASSEMBLY (concave) Cont. To assemble the Rear Panel to the Cores: Reference figures 13. Attach the Rear Panel to the Cores using four 1/4-20 x 1/2 hex washer head screws as shown in figure 13. (4) 1/4-20 x 1/2 Hex washer head screws Rear Panel Core Core Figure 13 24

25 CORE TO CORE ASSEMBLY (concave) Cont. To assemble the Plastic Top Cap to the Cores: Reference figure 14. Attach the Top Plate and Plastic Top Cap to the Cores using four #10-32 x 3/8 thread forming screws as shown in figure 14. (4) #10-32 x 3/8 Thread forming screws Plastic Top Cap Core Top Plate Core Figure 14 25

26 CORE TO CORE ASSEMBLY (concave) Cont. To assemble the Rear and Front Panels to the Cores and FPD Walls: Reference figures 15 and 15a. Note: On concave and convex units with FPD Walls. FPD Walls need to be attached to cores and previous FPD Walls before wedge components can be installed. Reference pages for FPD assembly. Attach a Front Panel to the FPD Walls using four 1/4-20 x 1/2 hex washer head screws as shown in figure 15a. Attach a Rear Panel to the FPD Walls using six 1/4-20 x 1/2 hex washer head screws as shown in figure 15a. Attach a Top Plate and a Plastic Top Cap to the FPD Walls using four #10-32 x 3/8 thread forming screws. Reference figure 15a. Plastic Top Cap (4) #10-32 x 3/8 Thread forming screws (6) 1/4-20 x 1/2 Hex washer head screws FPD Wall Top Plate Rear Panel (4) 1/4-20 x 1/2 Hex washer head screws FPD Wall See figure 15a Front Panel Figure 15a FPD Wall (moved for clarity) Figure 15 26

27 CORE TO CORE ASSEMBLY (convex) Note: Two people are required when assembling Core/Walls. 15º Angle is shown; also applies to 45º convex configurations. To connect multiple Cores (with tiers and without): Reference figures 16 and 16a. Note: On concave and convex units with FPD Walls. FPD Walls need to be attached to cores and FPD Walls before wedge components can be installed. Align Rear Panel with rear of Core/Wall. Reference figure 16. (Note: Upright location on Core indicates front reference.) Secure Rear Panel to Cores using four 1/4-20 x 1/2 hex washer head screws. Reference figure 16a. Core See figure 16a Core Front Figure 16 Rear Panel (4) 1/4-20 x 1/2 Hex washer head screws Figure 16a 27

28 CORE TO CORE ASSEMBLY (convex) Cont. To connect multiple Cores (with tiers and without): Reference figures 17. Assemble two Horizontal Connector Plates to the cores as shown using eight 1/4-20 x 1/2 hex washer head screws in two locations. Reference figure 17. Horizontal Connector Plates (8) 1/4-20 x 1/2 Hex washer head screws Figure 17 28

29 CORE TO CORE ASSEMBLY (convex) Cont. To assemble the Rear Panel to the Cores: Reference figures 18. Attach the Font Panel to the Cores using four 1/4-20 x 1/2 hex washer head screws as shown in figure 18. Core Core Front Panel (4) 1/4-20 x 1/2 Hex washer head screws Figure 18 29

30 CORE TO CORE ASSEMBLY (convex) Cont. Note: Wedge Upright is required for both 15º and 45º Wedge Connector. 90º, 180º and 360º do not require Uprights. To assemble the Wedge Upright to the Convex Wedge: Reference figures. 19, and 19a. First assemble Cantilever Supports to Wedge Uprights, left and right side. Reference figure 19. Align the holes in the back of each Transition Upright with the holes in the cores on both side of the Wedge. Secure using three 1/4-20 x 1/2 hex head screws. See Figure 19a. (4) 1/4-20 button head cap screws Cantilever Supports (4) Lock washers Cores (4) 1/4-20 button head cap screws (4) Lock washers (3) 1/4-20 x 1/2 Hex washer head screws each Upright Wedge Uprights Wedge Uprights Figure 19 Figure 19a 30

WORKSURFACE ASSEMBLY

WORKSURFACE ASSEMBLY WORKSURFACE ASSEMBLY Notes: Worksurfaces should be installed last. This provides easy access to Core/Walls. For Double Sided configurations, repeat the following sequences for the opposite side of the

More information

F l a t S c r e e n A R M S I n s t a l l a t i o n

F l a t S c r e e n A R M S I n s t a l l a t i o n ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)

More information

Linear Hook- on Worksurfaces

Linear Hook- on Worksurfaces Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep

More information

Command Console. Profile. Command Console Installation manual

Command Console. Profile. Command Console Installation manual Command Console Profile Command Console Installation manual Table of Contents SECTION I GENERAL INFORMATION About this manual............................3 Contact information..........................70

More information

LCD LIFT Flat Panel Display System Installation Manual. Table of Contents

LCD LIFT Flat Panel Display System Installation Manual. Table of Contents LCD LIFT Flat Panel Display System Installation Manual Table of Contents Page Installation Overview... 2 Trim Ring Installation... 3 LCD Lift Installation....4 Actuator Switch Installation.5 Top Plate

More information

Paramount Enclosure. Installation Guide

Paramount Enclosure. Installation Guide Paramount Enclosure Installation Guide Wright Line LLC 160 Gold Star Boulevard Worcester, MA 01606 Tel: 800-225-7348 508-852-4300 Fax: 508-365-6178 info@wrightline.com All products and company names are

More information

Workbench Instructions for Assembly

Workbench Instructions for Assembly Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with

More information

WEIGHT ADJUSTABLE ESPREE. Model 2ESP-WA-C48- Model 2ESP-WA-C60- 2ESP-WA Rev B 8/17 ASSEMBLY AND OPERATION

WEIGHT ADJUSTABLE ESPREE. Model 2ESP-WA-C48- Model 2ESP-WA-C60- 2ESP-WA Rev B 8/17 ASSEMBLY AND OPERATION WEIGHT ADJUSTABLE ESPREE PNEUMATIC TABLE BASE 2ESP-WA Rev B 8/17 Model 2ESP-WA-C48- Model 2ESP-WA-C60- = SLV, BLK or WHT ASSEMBLY AND OPERATION PARTS AND TOOLS PLEASE REVIEW these instructions before beginning

More information

Eaton Data Center Racks

Eaton Data Center Racks Eaton Data Center Racks U 1. Product Overview In today's world, network equipment is one of the most important investments a business can make. How you store and protect this equipment is just as crucial.

More information

TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.

TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER. TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support

More information

Jenny Legs Assembly Instructions

Jenny Legs Assembly Instructions Jenny Legs Assembly Instructions R EXTENDED PHILLIPS BIT MM ALLEN WRENCH 6MM HEX DRIVE /" 007 Steelcase Inc. Grand Rapids, MI 90 U.S.A. Printed in U.S.A. Page of 6 88000 Rev F Jenny Club Instructions:

More information

EmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY

EmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B

More information

LAN Locker Adjustable Shelves

LAN Locker Adjustable Shelves Adjustable Shelves LAN LOCKER ADJUSTABLE SHELVES * Adjustable Shelves are available for LAN LOCKER widths: 24, 30, 48, 60, and 72. * When installing more than one Adjustable Shelf, it is recommended that

More information

Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV

Showpiece Cabinet Integrated Stand For 32 - 52 LCD HDTV Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV

More information

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair

More information

Important Loading Information. Tools Required. Meridian Lateral Files Instructions

Important Loading Information. Tools Required. Meridian Lateral Files Instructions Y Meridian Lateral Files Instructions! WARNING Failure to observe stated capacities below will result in unsafe usage conditions, causing possible product damage or personal injury. Important Loading Information

More information

Star Trac Turbo Trainer Assembly & Setup

Star Trac Turbo Trainer Assembly & Setup Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is

More information

Workbench Instructions for Assembly

Workbench Instructions for Assembly Workbench Instructions for Assembly FlexWorks is a trademark of Lista International Corporation. Making Workspace Work is a trademark of Lista International Corporation. Document Number: MD002A3 Print

More information

Interactive Monitor Arm

Interactive Monitor Arm Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine

Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine Installation Guide Philips MP40/50/60/70 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe installation of MP40/50/60/70 mounting equipment on the anesthesia machine.

More information

Installing the Profile Privacy Panel. Assemble top mounting bracket. Prerequisites. Tools

Installing the Profile Privacy Panel. Assemble top mounting bracket. Prerequisites. Tools Installing the Profile Privacy Panel Complete these instructions to install the Profile Privacy Panel. Privacy panels are available in various heights to match tiers and include mounting hardware for slat

More information

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2

More information

Dublin Stalls Installation Instructions

Dublin Stalls Installation Instructions Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round

More information

TechBench Installation Manual

TechBench Installation Manual Manual Table of Contents TechBench Overview....2 Bench Assembly Linear,36 (914,4mm) Wide 96 (2438,4mm) Wide 3,4,5,6,7 Bench Assembly Linear,24 (609,6mm) Wide 30 (762mm) Wide..8,9 Bench Assembly Corner

More information

TITAN2-EDGE Public Access Computer Station Dual Track

TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the

More information

Assembly Instructions

Assembly Instructions Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt

More information

Oxford Stalls Installation Instructions

Oxford Stalls Installation Instructions Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or

More information

User Instructions Multiline Otter Scoreboard Caddy Assembly

User Instructions Multiline Otter Scoreboard Caddy Assembly List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)

More information

STOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets

STOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench

More information

Modular Bi-File Lateral

Modular Bi-File Lateral Modular Bi-File Lateral Installation Instructions 920-563-6362 E-mail: ssc@spacesaver.com Internet: www.spacesaver.com Contents Hardware Identification..................................3 Pre-Installation........................................6

More information

Technical Environment Systems INSTALLATION MANUAL

Technical Environment Systems INSTALLATION MANUAL Technical Environment Systems INSTALLATION MANUAL Technical Environment Systems INSTALLATION MANUAL Table of Contents INTRODUCTION Full Frame, Open Frame & Upright Assembly...A Foundations...B Mobile &

More information

EDGE2 DUAL MONITOR ARM

EDGE2 DUAL MONITOR ARM EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

SINCE 1922 P UBLICATION N O

SINCE 1922 P UBLICATION N O SINCE 1922 GARED SPORTS MICRO-Z SET-UP INSTRUCTIONS VERY IMPORTANT! READ INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP SET-UP PROCEDURE P UBLICATION N O. 5 5 1 7 5 2 9 1 6 Recommended tools and accessories.

More information

Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine

Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine Installation Guide Philips MP80/90 Installation Kit for Penlon Anesthesia Machine The purpose of this guide is to describe mounting of MP90 equipment on the anesthesia machine. WARNING: USE OF MOUNTING

More information

Xceed ASSEMBLY MANUAL

Xceed ASSEMBLY MANUAL Xceed ASSEMBLY MANUAL Table of Contents / Registration Congratulations on your commitment to fitness and your purchase of the Bowflex Xceed home gym. Before assembling your Bowflex Xceed home gym please

More information

INSTALLATION MANUAL. All Recessed Wall-Mount Modules Front-Loading, Rear-Loading, Parcel-Only, Collection Box, Trash/Recycling Bin

INSTALLATION MANUAL. All Recessed Wall-Mount Modules Front-Loading, Rear-Loading, Parcel-Only, Collection Box, Trash/Recycling Bin INSTALLATION MANUAL All Recessed Wall-Mount Modules Front-Loading, Rear-Loading, Parcel-Only, Collection Box, Trash/Recycling Bin TABLE OF CONTENTS GENERAL INFORMATION AND ADVISORIES 3 USPS INSTALLATION

More information

Assembly Instructions

Assembly Instructions InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective

More information

LARGE FLAT PANEL DISPLAY STATIC MOUNT PST 2000 Series

LARGE FLAT PANEL DISPLAY STATIC MOUNT PST 2000 Series INSTALLATION INSTRUCTIONS LARGE FLAT PANEL DISPLAY STATIC MOUNT The PST static wall mount accommodates large flat screens weighing up to 200 lbs (90.72kg). The teardrop holes in the mount allow for quick

More information

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42-55 Page 20 SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management

More information

Modular Furniture LMS. Technical environment systems Installation manual

Modular Furniture LMS. Technical environment systems Installation manual Modular Furniture LMS Technical environment systems Installation manual Technical Environment Systems INSTALLATION MANUAL Table of Contents INTRODUCTION Full Frame, Open Frame & Upright Assembly...A Foundations...B

More information

IDR assembly instructions:

IDR assembly instructions: IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

Assembled Ez2 Positioning/Operating Instructions

Assembled Ez2 Positioning/Operating Instructions Assembled Ez2 Positioning/Operating Instructions Step 1: Remove packaging material from unit. Report any damage to trucking company as soon as possible. Strap Unit Hand Truck Step 2: Remove unit from skid.

More information

Series 7 - Adjustable Height Tables

Series 7 - Adjustable Height Tables Page 1 of 22 Series 7 - Adjustable Height Tables Installation Instructions Tools required: #2 Phillips Bit with Extension #2 Square Drive Bit 4mm Hex Drive Bit Series 7 - Adjustable Height Tables Installation

More information

EPPA2-KIT DUAL MONITOR ARM CONVERSION

EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment

More information

3/8-16 x 3/4 cap screw. 3/8-16 hex nut for above screws. 1/4-20 x 3/4 socket cap screw. 3/16 short arm hex key (not to scale)

3/8-16 x 3/4 cap screw. 3/8-16 hex nut for above screws. 1/4-20 x 3/4 socket cap screw. 3/16 short arm hex key (not to scale) Super Slab Roller 24, 30 and 36 models Worktable Assembly Directions P.O. Box 89 Cheney, WA 99004 USA 509.235.9200/800.23.7896 Fax: 509.235.9203 www.northstarequipment.com Revised September, 2006. All

More information

Track Rack. * Track Racks are not lockable

Track Rack. * Track Racks are not lockable The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply

More information

Select Lab Fixed Height Workstation

Select Lab Fixed Height Workstation Assembly Instructions Select Lab Fixed Height Workstation Contents Important User Information.............................. 2 Safety Precautions.................................... 3 Required Tools........................................

More information

Heavy Duty Ceiling Tilt Mount Installation Manual

Heavy Duty Ceiling Tilt Mount Installation Manual HD-CTM-5580 Heavy Duty Ceiling Tilt Mount Installation Manual *This Installation requires a minimum of two people. For your safety: Read the complete instruction manual before starting an installation

More information

Series 7 AdjusTable Height Tables

Series 7 AdjusTable Height Tables Series 7 AdjusTable Height Tables Tools required: #2 Phillips Bit with Extension #2 Square Drive Bit 4mm Hex Drive Bit #3 Phillips Bit If you have a problem, question, or request, call your local dealer,

More information

M10 x 75mm Sockethead Cap Screws. 5mm Fender Washer (12) Included - (8) Required. #10 x 2.5" PH Wood Screws. (30) Included - (24) Required

M10 x 75mm Sockethead Cap Screws. 5mm Fender Washer (12) Included - (8) Required. #10 x 2.5 PH Wood Screws. (30) Included - (24) Required Door System Unit - Hardware Tools Included: (2) 2mm Allen Wrenches, (2) 3mm Allen Wrenches, (2) 4mm Allen Wrenches, (2) 6mm Allen Wrenches, and (1) 8mm T-Handle Allen Wrench Tools Required: Phillips Screwdriver,

More information

D3976 RECESSED EXIT INSTALLATION INSTRUCTIONS

D3976 RECESSED EXIT INSTALLATION INSTRUCTIONS PACKAGE CONTENTS PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES TEMPLATE INSTALLATION INSTRUCTIONS STRIKE HAND TOOL 5/32 HEX KEY ROD END CAPS EXIT DEVICE CRANK ARM

More information

Footprint Mobile Assembly Instructions

Footprint Mobile Assembly Instructions Footprint Mobile Assembly Instructions 1998754 Revision -1 Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 20 Kimball

More information

Franklin Mills Stackable Movable Lateral Instructions

Franklin Mills Stackable Movable Lateral Instructions Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11

More information

Series 4 HV Single Monitor Lift Assembly Instructions

Series 4 HV Single Monitor Lift Assembly Instructions 6703 Zinser Street Schofield, WI 54476 6/13/17 Series 4 HV Single Monitor Lift Assembly Instructions Read all the instructions before beginning. Hardware Pack # 53368 Page1 OF 6 Tools Required for Assembly:

More information

TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF

TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF DXST4500 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS TECHNICAL

More information

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

INSTRUCTION BOOKLET #C20

INSTRUCTION BOOKLET #C20 INSTRUCTION BOOKLET #C0 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT IN SEVERE PERSONAL INJURY TO

More information

MPA-9000 Universal Ceiling Projector Mount Kit

MPA-9000 Universal Ceiling Projector Mount Kit I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low

More information

Medium HoneyBadger Chase Rack Installation Instructions

Medium HoneyBadger Chase Rack Installation Instructions PREPARATION Medium HoneyBadger Chase Rack Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend reading

More information

Phone #: (360) Online Tech Support: Web:

Phone #: (360) Online Tech Support: Web: Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz Your new Model D2058A Super-Heavy Duty Mobile Base () is designed to give you a stable and mobile platform upon

More information

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

LOW-PROFILE WALLMOUNT CABINETS

LOW-PROFILE WALLMOUNT CABINETS USER MANUAL RMT35X SERIES LOW-PROFILE WALLMOUNT CABINETS 24/7 AT OR VISIT BLACKBOX.COM TABLE OF CONTENTS SAFETY INFORMATION... 3 Receiving, Unpacking, and Removing the Low-Profile Wallmount Cabinet from

More information

Arc Trainer Main Frame Assembly

Arc Trainer Main Frame Assembly Arc Trainer Main Frame Assembly Kit No. 610AK019-4 Kit No. 630AK019-4 NOTE: This instruction sheet describes how to replace the main frame assembly in the Arc Trainer 610A. Tools Required 3/16 Allen wrench

More information

Therma-Tru Door Gallery Setup Instructions Swing Unit with Hardware Kit - Hardware Part # MADGSWU15 (Swing Unit) Part # MADGHKSU10 (Hardware Kit)

Therma-Tru Door Gallery Setup Instructions Swing Unit with Hardware Kit - Hardware Part # MADGSWU15 (Swing Unit) Part # MADGHKSU10 (Hardware Kit) Swing Unit with Hardware Kit - Hardware Tools Included: 4mm Allen Wrench, 6mm Allen Wrench, 8mm T-Handle Allen Wrench (1) 3/4" Drill Bit, (1) 7/32" Drill Bit and Hole Template Guide Tools Required: Phillips

More information

FLAT PANEL CART WITH OR WITHOUT A PULL OUT SHELF

FLAT PANEL CART WITH OR WITHOUT A PULL OUT SHELF FP42UL FP60UL FP42MUL FP60MUL FLAT PANEL CART WITH OR WITHOUT A PULL OUT SHELF WARNING: FP42 carts are intended to hold monitors up to 75 lbs and FP60 carts are intended to hold monitors up to 100 lbs.

More information

compile system INSTALLATION GUIDE Updated January 2019

compile system INSTALLATION GUIDE Updated January 2019 INSTALLATION GUIDE Updated January 09 compile system Table of Contents Panels 0 Quick Connect Clips 0 Lock Clips 0 Panel Trims 0 Privacy Glass 0 Post Base Covers 04 Electrical 04 Power Distribution Harness

More information

Powerware Series. Eaton Rail Kit 9- and 12-Slot Cabinets Installation Guide

Powerware Series. Eaton Rail Kit 9- and 12-Slot Cabinets Installation Guide Powerware Series Eaton 9170 + Rail Kit 9- and 12-Slot Cabinets Installation Guide Eaton and Powerware are registered trademarks of Eaton Corporation or its subsidiaries and affiliates. Phillips is a registered

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

LF Series Assembly Instructions

LF Series Assembly Instructions LF Series Assembly Instructions 1998760 Revision A-10 Complete Series Master Packet 2010 Kimball International, Inc. T 800.482.1818 F 812.482.8300 Footprint Storage and Metal Filing Systems Assembly Instructions

More information

ASSEMBLY GUIDE. Mia Narrow Bookcase

ASSEMBLY GUIDE. Mia Narrow Bookcase ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step

More information

Select Lab Adjustable Height Workstation

Select Lab Adjustable Height Workstation Assembly Instructions Select Lab Adjustable Height Workstation Mobile version is shown. Also available without casters. Contents Important User Information.............................. 2 Safety Precautions....................................

More information

Series Adjustable Height Tables

Series Adjustable Height Tables Series 7.2 - Adjustable Height Tables Tools required: Power Drill #2 SQUARE DRIVE BIT If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522)

More information

ASSEMBLY AND ADJUSTMENT

ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and

More information

SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL

SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done

More information

https://www.wallbedsbywilding.com/wallbed-installation-studio-series/

https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED

More information

Installation Instructions

Installation Instructions Articulating Dual Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied

More information

Side Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY

Side Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT

More information

INSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE

INSTRUCTION BOOKLET #C21. For Wallbed models: KING SIZE For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS For Wallbed models: Do-It-Yourself BOOKLET #C90 WARNING! ALL MURPY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION

More information

Bunk Pod Front Entry Assembly Instructions

Bunk Pod Front Entry Assembly Instructions Bunk Pod Front Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod This step by step guide will show how to assemble your pod(s) on site. It

More information

FlexFrame - Storage Components and Skins

FlexFrame - Storage Components and Skins FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General

More information

Trak-Slider Instructions

Trak-Slider Instructions Trak-Slider Instructions 1/4-20 x 3/4" Hex Head Bolt 1/4-20 Flanged Hex Nut Gusset 1/4-20 x 1/2" Allen Cap Screw 1/4-20 Nylock Nut Rivet 1/4-20 x 3/8" Pan Head Phillips Machine Screw 1/4 USS Flat Washer

More information

INSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.

More information

For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED

More information

Assembly Instructions Signature Choral Riser 4-Step Model

Assembly Instructions Signature Choral Riser 4-Step Model Assembly Instructions Signature Choral Riser 4-Step Model Contents Important User Information...........................2 General...2 Manufacturer...2 Intended Use...2 Warranty...2 Safety Precautions.................................3

More information

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at 1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel

More information

3 wide x 3 deep Video Wall Display Installation Guide

3 wide x 3 deep Video Wall Display Installation Guide HoverTrack Series 3 wide x 3 deep Video Wall Display Installation Guide VWD-3X3-X462 This display kit mounts NEC X461UN and X462UNS LCD monitors in a 3 wide by 3 deep landscape configuration. The frame

More information

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series INSTALLATION INSTRUCTIONS Large Flat Panel Wall Mount Model: PRO-2000 Series PRO-2000 Series Wall Mount Features: Accommodates large flat screens weighing up to 200 lbs (90.7 kg). Mounting brackets adapt

More information

Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold

Flat Panel Stand FPZ-655. for 32 to 55 Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination

More information

Mighty Mo GX Series Cabinet Installation Guide. OR Rev /11

Mighty Mo GX Series Cabinet Installation Guide. OR Rev /11 Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating

More information

INSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.

More information

Joiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B

Joiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B Joiner Kit For Models N388, C450, E402B, E411T, E415H, E440T, E442B, E521T and E522B KIT COMPONENTS Part Illustration Description Rear Bracket Front Lower Bracket Front Upper Bracket KIT APPLICATION This

More information

Installation and Assembly: 32" - 60" Flat Panel TV Cart

Installation and Assembly: 32 - 60 Flat Panel TV Cart nstallation and Assembly: 32" - 60" Flat Panel TV Cart Models: SR1M, SR560M R This product is UL Listed. t must be installed by a qualified professional installer. Max UL Load Capacity: 150 lb (68 kg)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TreadClimber INSTALLATION INSTRUCTIONS STAR TRAC FITNESS 1 of 14 635-4175 Rev: B NOTICE Installation of this product requires that 2 or more people are available to safely perform certain steps outlined

More information

INSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD

INSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD INSTRUCTION BOOKLET #34 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION

More information

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax Copyright 2004. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JANUARY 2004 RF500A RF507A RF514A RF521A RF501A RF508A RF515A RF522A RF502A

More information