Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY
|
|
- Shon Wade
- 5 years ago
- Views:
Transcription
1 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish of existing vehicles and the painting of newly build commercial vehicles and trailers. The EU VOC limit for this product (product category: IIB.C) in ready to use form is max target 540 g/litre. The VOC content of this product in ready to use form is max 531 g/litre Product and Additives: Autocoat BT Autocoat BT LV 350 Primer EP Hardener Autocoat BT LV 350 Primer EP Hardener Fast Autocoat BT LV 350 Primer EP Reducer suction feed 1-2* mm 3-5 bar Basic Raw Materials: Autocoat BT Autocoat BT LV 350 Primer EP Hardener /103 Autocoat BT LV 350 Primer EP Reducer : epoxy resins : polyamide resins : solvents 5-10 mins. see t.i.s. Polystop LP Polykit IV Suitable Substrates: Existing finishes, with the exception of finishes with a thermoplastic behavior (Phosphated) Steel (note 1) Stainless steel Zinctec (see note 2). Hot dipped galvanized steel and Zincor. Aluminium (see note 3). Polyester laminates and plywood Sikkens polyester bodyfillers and Polysurfacer. Notes: 1. Chemical cleaners and pretreatments should be pre-approved by AKZO Nobel 2. It is important that the zinc-coated steel is dried at 60 C prior to the painting in order to avoid gassing. 3. It is not advised to use Autocoat BT on aluminum click constructions and in the case of rivets Surface Preparation: Existing finishes: Degrease with Autocoat BT LV 350 Antistatic Silicone Remover and dry sand with P280 grit. Steel: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P180 grit. Blast clean if necessary, Sa Stainless steel and aluminum: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P180 grit or degrease with LV 350 Antistatic Silicone Remover and abrade with Scotch Brite type A (red). Hot dipped galvanized steel, Zincor and aluminum: Degrease with LV 350 Antistatic Silicone Remover and abrade with Scotch Brite type A (red). Polyester laminate and plywood: Degrease with LV 350 Antistatic Silicone Remover 1/5
2 and dry sand with P280 grit or abrade with Scotch Brite type A (red). Wood: Dry sand with P180 grit to achieve a smooth surface and to remove any loose fibers. Sikkens polyester bodyfillers and Polysurfacer: Degrease with LV 350 Antistatic Silicone Remover and dry sand with P180-P280-grit. Tinting: can be tinted with Tintflex tinters up to 5 percent by weight. Mixing Ratio by Volume: Conventional application Mixture A : 4 parts of Autocoat BT 1 parts of Autocoat BT LV 350 Primer EP Hardener part of Autocoat BT LV 350 Primer EP Reducer Use mixing stick # 34 For improved through hardening at lower temperatures the following mixing ratio should be used: Mixture B: 5 parts of Autocoat BT 2 parts of Autocoat BT LV 350 Primer EP Hardener Fast ,5 part of Autocoat BT LV 350 Primer EP Reducer Use mixing stick # 32 Note: 1. For airless and air assisted airless application above mentioned hardeners can be used without addition of reducer. 2. For use with plural component equipment consult your Sikkens technical representative Spraying Viscosity: Mixture A : secs DIN Cup 4 at 20 C. Mixture B : 18 secs DIN Cup 4 at 20 C. Potlife: Mixture A : 8 hours at 20 C Mixture B : 4 hours at 20 C 2/5
3 Spray gun fluid tip and working pressure: Spray Gun: Fluid Tip: Working Pressure: Gravity feed: mm 3-5 bar Gravity feed HVLP: mm max. 0.7 bar Suction feed: mm 3-5 bar Suction feed HVLP: mm max. 0.7 bar Airless spray 4.13/ bar¹ Airmix spray 4.13/ bar¹ Pressure feed: mm 3-5 bar atomization pressure and ± 1 bar material pressure ¹It is advised to use an installation with a minimum pump ratio of 30:1 Note: Consult your Sikkens technical representative for Electrostatic spray application. Application Process: Spray gun Apply 1-2 single coats, allowing a flash-off time of 5 to 10 minutes between coats. Airless/Airmix spray Apply 1 cross-coat or 2 single coats. Brush Don t add any thinner to both mixtures. Film Thickness: Approx µm total film thickness Theoretical cover rate: m²/l ready for use mixture at 60 µm. Note: The practical cover rate depends on many factors i.e. shape of the object, roughness of the surface, application method and application circumstances. Cleaning of Equipment: Use Autocoat BT LV 350 Primer EP Reducer Drying times: 10 C: 20 C: 40 C: 60 C: Recoatable with bodyfillers: At maximum 60 µm after: 2 hrs 45 mins 30 mins 15 mins Recoatable with filler or topcoat/basecoat In case of LV 350 Primer EP Reducer At 90 µm after: 1½ hrs 45 mins 30 mins 15 mins 3/5
4 Notes: 1. LV 350 Primer EP must be abraded with P360-P400 grit prior to be recoated with a finish, if a drying time of 48 hours at 20 C is exceeded. 2. LV 350 Primer EP using Hardener can be recoated with itself within 3 months without abrading. 3. LV 350 Primer EP using Hardener Fast can be recoated with itself within 1 month without abrading. 4. Apply a minimum film build of µm of LV 350 Primer EP for a good corrosion protection and adhesion to the substrate. Recommended sandpaper grades before recoating with topcoat, when necessary: Dry sand with : P280-P360 Wet sand with : P800-P1000. Recoatable with: Polyester bodyfillers Autocoat BT LV 250 Topcoat MM/RM Autocoat BT LV 250 Topcoat IC RM Autocoat BT LV 350 Topcoat MM/RM Autocoat BT LV 351 Topcoat MM/RM Autocoat BT LV 350 Filler Beige/Gray Autocoat BT LV 350 Filler Varicolor Autocoat BT WB 551 Basecoat RM / Autowave Packaging: : 10L in 20-liter and 160 liter in 200-liter drum LV 350 Primer EP Hardener : 5L in 5-liter can, 200-liter in 200-liter drum LV 350 Primer EP Hardener Fast : 5L in 5-liter can. LV 350 Primer EP Reducer : 5L in 5-liter can, 200-liter in 200-liter drum Color: Light yellow HEALTH & SAFETY DATA regarding Autocoat BT : For professional use only. (See Material Safety Data Sheet). See text on the label of this product. The user of this product is required to comply with the national statutory regulations for health and safety at work and waste disposal. 4/5
5 Akzo Nobel Car Refinishes B.V. Address: Rijksstraatweg 31, PO Box 3, 2170 BA Sassenheim Tel: +31(0) IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. Always read the Material Data Sheet and the Technical Data Sheet for this product if available. All advice we give or any statement made about the product by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product. All products supplied and technical advices given are subject to our standard terms and conditions of sale. You should request a copy of this document and review it carefully. The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development. It is the user's responsibility to verify that this data sheet is current prior to using the product. Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel. Head Office Akzo Nobel Car Refinishes B.V., PO Box BA Sassenheim, The Netherlands. 5/5
Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY
100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..
More informationFOR PROFESSIONAL USE ONLY
100 3506-001 20 3599-104 40 3506-204 3505-205 23 Description: High performance, fast drying two-pack non-sanding filler or sanding filler. The target use for this product is refinishing and refurbish of
More informationmm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application
Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationUse suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.
Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The
More informationE380 and E381 Epoxy Primer
Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380
More informationPrimer / Primer Surfacer
Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationApply a high gloss color coat: LV650 Topcoat or LV650 Basecoat per TDS. Flash a minimum of 20 minutes before LV650 LumiCoat High Gloss application
Description Autocoat BT LV650 Infuse LumiCoat is a high gloss, two-component polyurethane topcoat that offers the ability to add reflectance or brilliance to any Autocoat BT LV650 color. LumiCoat is part
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationAutowave 3 Stage Application and Repair
Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels
More informationnax Pro LV3601/03/05 VHS Primer Surfacer
Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good
More information10P20-44MNF High Solids Epoxy Primer
Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.
More informationApplication and Repair of Autobase Plus Red Tri-Stage Colors
Description Sikkens Autobase Plus Ready Mix (RM) Groundcoat and Midcoat are a unique color package that requires a specialized blend of pigments and toners designed to provide a color match for FA12:RR.
More informationAutobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015
Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be
More informationnax K Premium Primer
Description Premium quality, high build multi grey shade fast drying, 2K sanding primer filler with excellent application and sanding properties. Due to its fast ambient drying, it helps to reduce process
More informationSELECTION AND PREPARATION OF SUBSTRATES
592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates
More informationnax Urethane Primer Surfacer Zitan
Description Quick-drying two-pack wet on wet primer surfacer and sanding primer filler with excellent application and sanding properties. Helps to reduce process time due to its wide application window
More informationHP Epoxy Primer P
Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationProduct Data Sheet November 2016
Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More informationJanuary 2007 Product Information DELTRON D821
GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.
More informationGRIP-GARD BC Translucent For Professional Use Only
Description Grip-Gard BC uses a specially blended binder which converts Grip-Gard BC toners into a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted quickly
More informationHP Chromate Free Epoxy Primer P /-4505/-4510
Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free
More informationMarch 2009 Product Information RAPID GREYMATIC 2K Filler
GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,
More informationBC Translucent uses a specially
Grip-Gard BC Translucent Description Technical Data Sheet October 2013 Topcoat Grip-Garinto a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted BC Translucent
More informationAerodur 3001 Base Coat Special Effects
Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001
More informationProduct Information PRIMA D839 2 Component Primer
GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick
More informationPercoTop PUR 2K MS Topcoat
Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint
More informationProduct Data Sheet August 2006 (Updated in December 2014)
Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationPercoTop 449 2K Structure Topcoat
Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop
More informationProduct Information DP5000
GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Express Surfacer 5250. Permasolid HS Express Surfacer 5250 is a high-grade, productive, VOCcompliant 2K HS sanding surfacer based on acrylic resins. Very good application
More informationFull Product Name. Products. Properties. 2K Etch Primer. Type of Product Description
Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion
More informationProduct Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description
Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Premium Surfacer 5310. Permasolid HS Premium Surfacer 5310 is a very high-grade two-pack HS sanding surfacer based on acrylic resins. very long application time ideal,
More information8-746 High Production Non-Sanding Primer Grey GS907
8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,
More informationProduct Data Sheet March 2015
Product Data Sheet March 2015 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY 2K HS Plus Express Clearcoat P190-6659 Product Product Description P190-6659 is a fast drying high solids 2-pack express clearcoat.
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically
More informationMarch 2013 Product Information GRS Deltron BC
GLOBAL REFINISH SYSTEM March 2013 Product Information GRS Deltron BC Basecoat colour PRODUCTS Deltron Basecoat Tinters Deltron Xirallic Special Effect Tinters Deltron Thinners Deltron BC Fade-out Thinner
More informationVolume Solids %
Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity
More informationP Waterborne Primer-Surfacer-Grey
PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot
More informationPermasolid HS Vario Surfacer 8590
Permasolid HS Vario Surfacer 8590 GENERAL DESCRIPTION A high quality acrylic surfacer from our 2K-Acryl-System for partial and full passenger car refinishes. Its versatility enables application at both
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationProduct Information Deltron D894 High Solids Clear
GLOBAL REFINISH SYSTEM May 2012 Product Information Deltron High Solids Clear PRODUCTS Deltron HS Clear Deltron HS Hardeners D897, D8208 Deltron MS Hardener D803, D841, D861, D864 Deltron Thinners D808,
More informationMay 2012 Product Information GRS Deltron D800
GLOBAL REFINISH SYSTEM May 2012 Product Information GRS Deltron Clear PRODUCTS Deltron Clear Deltron Medium Solids Hardeners D803, D841, D861 Deltron Accelerated Medium Solids Hardener D864 Deltron Standard
More information2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX
2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX PICTOGRAM DESCRIPTION Degrease Machine sand dry Hand sand wet Hand sand dry Scotch Brite Use Akzo Measuring Stick Ready to Spray Mixing Ratio: 2
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationUHS Duralit Extra Tinters series 150
2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum
More informationPRODUCT GUIDE: COMPLIANT TOPCOATS. Version:
PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint
More informationAquaCLAD Water-Reducible Rust Preventative Alkyd
AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High
More informationPermasolid HS Premium Surfacer 5310
Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationPRODUCT GUIDE: CATALYZED TOPCOATS. Version:
PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane
More informationTechnical Data Sheet.
Technical Data Sheet. Permasolid HS Automotive Top Coat 275. Permasolid HS Automotive Top Coat 275 is a High-Solid top coat system for solid colours. It is used for passenger car finishes. The comprehensive
More informationSoak a cloth with SC 850 and wipe over a sand-through.
Process description High-quality refinishing process suitable for long-lasting restorations of classic cars in professional body shops, using the R-M base- clear coat systems. Substrates - Steel - Galvanised
More information2 : % VOC-compliant clear 2 : % Clear Mixing ratio 100% by vol Film thickness: µm.
Application: Drying accelerator for Glasurit standard clears (VOC-compliant and non-voc-compliant), Line, Line VOC, VOC MC600, and 85- HS-Primerfiller / Filler Properties: Reduction of drying times Improves
More informationJuly 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear
GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst
More informationSYSTEM INFORMATION Glasurit 55 Line procedure
1. Edge to edge repair 1-0 Process description Paint system with improved surface hardness for Nissan GT-R with Line 55. 1-1.Application of surfacer Apply 801-72 according to 801-72 technical information.
More informationTECHNICAL DATA SHEET 9008B0900D. Desothane HD 9008B0900D Buffable Clear Coat. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description Desothane HD is a buffable clear coat intended to be used over Desothane HD 9008 Basecoat. can also be used as a buffable clear coat over pigmented polyurethane
More informationProduct Information FILLERS
GLOBAL REFINISH SYSTEM February 2010 Product Information FILLERS PRODUCTS Galvaplast 77 - Multi Purpose Polyester A656 Multi Purpose A722 - Flexible Polyester Putty - Standard Polyester A1 - Polyester
More informationPRODUCT GUIDE: WATERBORNE TOPCOATS. Version:
PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible
More informationCV116 Polyurethane Coat Gloss
Polyurethane Coat Gloss TECHNICAL DATA SHEET Product Description Components is a two pack, ambient curing clear polyurethane gloss coating, designed for internal / external use to protect identification
More informationJuly 2014 Product Information GRS DELTRON D8122 CERAMICLEAR TM 8122 CeramiClear 8122 Clear
GLOBAL REFINISH SYSTEM July 2014 Product Information GRS DELTRON CERAMICLEAR TM 8122 CeramiClear 8122 Clear PRODUCTS Deltron CeramiClear 8122 Clear Deltron HS Hardeners Deltron Thinners Deltron Catalyst
More informationPAINT SYSTEMS Polyester yachts
PAINT SYSTEMS Polyester yachts Polyester osmosis renovation Polyester osmosis repair Polyester below the waterline Polyester above the waterline Polyester decks Polyester superstructure Polyester interior
More informationF565 Intermediate Coatings (EMEA)
TECHNICAL DATA SHEET Product Description Components is a two pack, pigmented, polyamide based coating formulated for use as intermediate coats in selectively strippable finish paint systems. High resistance
More informationK 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)
K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer
More informationData Sheet 5741 Englisch
Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl
More informationPhysical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.
Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (
More informationVELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981
VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 VELOX PLUS TECHNICAL INFORMATION Please read all information and application instructions before beginning. Coverage Estimates Normal
More informationAutomotive Refinish Terminology
Automotive Refinish Terminology Accelerator: A substance that when added to a paint will speed up the rate of cure. Acetone: A very fast evaporating solvent with high solvency for certain types of compounds
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V PRIME Acrylic Urethane Surfacer P 238 DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable
More informationD895 EU-113. Colour Blender. Preparation of Substrate: Required Products. Product Description:
Product Description: GLOBAL REFINISH SYSTEM is a multipurpose product used with Global Refinish System BC colour. Mixed ready-to-spray with BC Colour, it is used as a blending clear along the colour blend
More informationNOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).
Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as
More informationCUPRON NEXT TECHNICAL DATA SHEET
Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.
More informationMetal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces
Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,
More informationGen2O - Environmentally Friendly
Waterborne Automotive Basecoat: Go for Gen2O and build a future for your business that makes cents. Gen2O is user friendly and cost effective. The transition from conventional to Gen2O is easy. Only minor
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More information3M Spray Equipment Products Automotive Refinish Applications. Effective, Efficient. Economical
3M Spray Equipment Products Automotive Refinish Applications Effective, Efficient Economical Key Benefits of using the 3M PPS Paint Preparation System Only one PPS cup for mixing and spraying Enables painters
More informationMarine. Paint Specification: November ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS
Marine ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS ::Below the Water Line:: System 1 Fiberglass Substrate Pre Treatment Degreaser 10 Additional Requirements Keep surface wet for 5 to 10
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V-PRIME DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V-PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable for the wide range of day-to-day
More informationTECHNICAL DATA SHEET 515X349. DeSoto 515X349 Exterior Primer. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description DeSoto exterior primer is a conventional solids urethane compatible epoxy coating. This primer was formulated to protect aluminum and composite substrates from
More informationProduct Data Sheet Awlwood MA Primers OJ3809 / OJ9809 / OJ7809 Specification Data
Specification Data Packaging: Product Code: Cleaning: Available in 1 quart packs OJ3809 Clear; OJ9809 Yellow; OJ7809 Red OT0200 Awlwood MA Brush Cleaner Volume Solids: 45% Specific Gravity: OJ3809-1.013
More informationHigh-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.
Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding
More informationPRODUCT GUIDE: CATALYZED PRIMERS. Version:
PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and
More informationProcess description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB
Process description R-M process ONYX HD. Special paint system for the Nissan GT-R, colour KAB Substrates - original OEM paint Nissan Required products - PK 700 / PK 900 / PK 1000 / PK 2000 - EUROXY CP
More informationDesobond CA102 Adhesive Bonding Primer
TECHNICAL DATA SHEET Product Description Components Desobond is a low density adhesion promoter. It was developed to improve bonding characteristics to aged primers, topcoats, acrylics, aluminum, and other
More informationPRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS
PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS ULTRIMAX 1 ULTRIMAX 1 ULTRIMAX 1 THE NUMBER 1 FOR SAVING YOU TIME AND EFFORT ULTRIMAX 1 COMPLIANT PRIMER, GLOSS AND VALUE IN ONE Ultrimax 1 is a high build acrylicbased
More informationPaint Problems and Solutions Guide. Endura Manufacturing Co. Ltd th Street Edmonton, Alberta T5L 2J
Paint Problems and Solutions Guide Endura Manufacturing Co. Ltd. 12425 149th Street Edmonton, Alberta T5L 2J6 1-800-661-9930 www.endura.ca Table of Contents Paint problems are easy to spot, but in many
More informationDPLV Low VOC Epoxy Primer P-245
Low VOC Epoxy Primer P-245 Low VOC Epoxy Primer provides excellent adhesion and corrosion resistance to many types of properly prepared steel, aluminum, and fiberglass substrates. Epoxy Primer may also
More information