APPLICATION REFERENCE
|
|
- Pearl Armstrong
- 5 years ago
- Views:
Transcription
1 O.D./I.D. GROOVING INSERTS Insert Shown in D THINIT LGI093D2.240" FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides RDIUS: Sharp corner through full radius available TOP RKE: 0 LED NGLE: 0 '' TOLERNE:.004" -.063": / " -.125": +.001/-.001 PRODUT INFORMTION This insert style will cut to within 1/16" of a shoulder. To work against a shoulder see Page Sub-micron grain DUR-MX 2000 and 5000 arbides and. Inserts available with TiN, TiIN, TiN and Diamond coating. PRODUT DEMONSTRTION SPEEDS ND FEEDS PPLITION REFERENE TROULE SHOOTING TEHNIL SETIONS PG 9-10 PGS 9-3 & 9-4 PG ORDERING INSTRUTIONS omplete the ORDER ODE in the table below that represents your selection of groove width and insert grade. The ORDER ODE for an.093" groove width insert in DUR-MX 2000 is: LGI D2 Specify the Tool Width '' SPEIFITIONS ORDER ODE INFORMTION Insert Width Range Depth of ut See Page 9-5 for expanded material descriptions and Page 9-10 for Speeds and Feeds information dd-ons Use 'Order ode' and dd lank Width Overall Length atalog Section 7 & 10 '' '' DUR-MX 2000 arbide For & Interrupted utting DUR-MX 5000 arbide For luminum & Non-ferrous Full Radius Page 8-3 orner Radius Page 8-3 oating Page 9-6 '' 'D' Use s eginning With.004"-.034" 3 x ''.035"-.063".100".064"-.095".096"-.125" SGI _ D2 SGI _ D5 SGI _ HS add 'FR' add 'R _' (indicate size in.xxx") TiN add '' TiN add 'D' TilN add 'E'.068".650" Diamond 1.5 x '' LGI _ D2 LGI _ D5 LGI _ HS add 'F'.130".721" 'S' 'EM' 'ROM' 'L' 'EM' 'ROM' Section KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
2 PRTING INSERTS Insert Shown in D THINIT LPT085D5 E FRONT RKE: RIDE: Primary 7 honed, Secondary 15 HIGH SPEED STEEL: 15 on SPT025HS, 7 all others K LERNE: 0 SPT045HS and SPT062HS; 1 all others SIDE LERNE: 1 RDIUS: None TOP RKE: 0 LED NGLE: 0 GROOVING & PRTING INSERTS PRODUT INFORMTION This insert style will cut to within 1/16" of a shoulder..025",.045",.062",.085" and.115" Parting off up to 1" diameter 0 or 7 lead angle entered Sub-micron grain DUR-MX 2000 and 5000 arbides and. Inserts available with TiN, TiIN, TiN and Diamond coating. PRODUT DEMONSTRTION SPEEDS ND FEEDS PPLITION REFERENE TROULE SHOOTING TEHNIL SETIONS PG 9-20 PG 9-4 PG ORDERING INSTRUTIONS Select the ORDER ODE in the table below that represents your selection of groove width and insert grade. The ORDER ODE for an.085" wide parting insert in DUR-MX 5000 is: LPT085D5 SPEIFITIONS ORDER ODE INFORMTION Groove Width Depth of ut See Pages 9-5 for expanded material descriptions and Page 9-20 for Speeds and Feeds information oatings See Page 9-6 for expanded coating descriptions lank Width Overall Length lank Height atalog Section 7 & 10 '' '' DUR-MX 2000 arbide For & Interrupted utting DUR-MX 5000 arbide For luminum & Non-ferrous Use uncoated part number and add coating code TiN TiN TilN Diamond '' 'D' 'E' Use s eginning With.025".200" SPT025D2 SPT025D5 SPT025HS.045" SPT045D2 SPT045D5 SPT045HS.500".062" SPT062D2 SPT062D5 SPT062HS add '' add 'D' add 'E' add 'F'.068".650" 1.000".240" 'S' 'EM' 'ROM'.085" LPT085D2 LPT085D5.238".500" add '' add 'D' add 'E' add 'F'.125" 1.000".115" LPT115D2 LPT115D5.232" 'L' 'EM' 'ROM' Section 7 KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
3 O.D./I.D. THREDING INSERTS D FRONT RKE: 15 RDIUS:.002" or.000" TOP RKE: 0 Insert Shown in PRODUT INFORMTION External threading within.046" of a shoulder. Internal threading with 1.250" minimum bore diameter. 8 Threads Per Inch and greater. Sub-micron grain DUR-MX 2000 and 5000 arbides and. Inserts can be coated with TiN, TiIN, TiN and Diamond coating. PRODUT DEMONSTRTION SPEEDS ND FEEDS PPLITION REFERENE TROULE SHOOTING TEHNIL SETIONS PG 9-18 PG 9-4 PG ORDERING INSTRUTIONS omplete the ORDER ODE in the table below that represents your selection of Threads Per Inch and insert grade. The ORDER ODE for an TPI insert in DUR-MX 2000 is: STTD2 SPEIFITIONS ORDER ODE INFO. Insert Threads Per Inch See Page 9-5 for expanded material selections and Page 9-18 for Speeds and Feeds information DUR-MX 2000 arbide For & Interrupted utting DUR-MX 5000 arbide For luminum & Non-ferrous oatings See Page 9-6 for Expanded oating Descriptions Use Uncoated Part Number and dd oating ode TiN TiN TilN Diamond lank Width '' Overall Length 'D' atalog Section 7 & 10 Use s eginning With entered For either right hand or left hand 15 to 56 STTD2 STTD5 STTHS Greater than 56 STTD21 STTD51 STTHS1 8 to 56 LTTD2 LTTD5 LTTHS Greater than 56 LTTD21 LTTD51 LTTHS1 add '' add 'D' add 'E' add 'F'.068".650" add '' add 'D' add 'E' add 'F'.130".721" 'S' 'L' Section KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
4 GROUND LNKS & GROOVING INSERT SETS ottom ngle, both sides THINIT SG068D2.240" FRONT RKE: 7 on SGP068HS; 15 all others GROUND LNK ORDERING INSTRUTIONS Select the ORDER ODE in the table below that represents your selection of blank width and insert grade. The ORDER ODE for a.068" wide blank and.654" length in DUR-MX 2000 is: SG068D2 LNKS & SETS SPEIFITIONS ORDER ODE INFO. lank Width '' Overall Length '' ottom ngle See Page 9-5 for expanded material descriptions DUR-MX 2000 arbide For & Interrupted utting DUR-MX 5000 arbide For luminum & Non-ferrous Use s eginning With.068".654" 0º SG068D2 SG068D5 SG068HS 1.004" 0º SGP068D2 SGP068D5 SGP068HS 'S'.125" 1.004" 0º LGP125D2 LGP125D5.130".725" 10º LG130D2 LG130D5 LG130HS 'L' SET ORDERING INSTRUTIONS Page 10-1 Select the ORDER ODE in the table below that represents your selection of insert width(s) and insert grade. For '1 Each' set types, specify the size range with the 'Order ode' The ORDER ODE for a '1 Each' set type, in DUR-MX 2000 with a groove width range of is: SSET2D2 SPEIFITIONS ORDER ODE Type Set Type Insert Width '' See Page 10-1 DUR-MX 2000 arbide For & Interrupted utting Uncoated See Page 9-5 for expanded material descriptions and Page 9-10 for Speeds and Feeds information DUR-MX 5000 arbide For luminum & Non-ferrous Uncoated.004"-.009" SSET1D2 SSET1D5 SSET1HS Inserts only; Use toolholders beginning with 'S' 1 Each, by.001" increments Inserts Only.010"-.030" SSET2D2 SSET2D5 SSET2HS.031"-.050" SSET3D2 SSET3D5 SSET3HS.051"-.063" SSET4D2 SSET4D5 SSET4HS Inserts only; Use toolholders beginning with 'L' Section 7 1 Each, by.001" increments Inserts Only.064"-.084" LSET1D2 LSET1D5 LSET1HS.085"-.105" LSET2D2 LSET2D5 LSET2HS.106"-.125" LSET3D2 LSET3D5 LSET3HS KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
5 FLUSHTOP & HRDINGE TOOLHOLDERS THINIT KISER TOOL OMPNY, IN. 3/8" RIGHT HND S SERIES Illustrated FLUSHTOP ORDERING INSTRUTIONS Select the ORDER ODE in the table below that The ORDER ODE for a shank, right hand flushtop tool for inserts beginning with 'L' is: LFT38R SPEIFITIONS Dimensions Includes, lamp and '' '' '' For Inserts eginning With ORDER ODE Use with right centered inserts Use with left hand and centered inserts 'S' 'L' lamp Screw Wrench Pin.312".312" 4.840" SFT56R lamp S LFT56R lamp S " SFT38R lamp S LFT38R lamp S ".500" 4.840" SFT12R LFT12R lamp S ".625" 4.840" SFT58R lamp S " 4.840" LFT58R lamp S ".312" 4.840" SFT56L lamp S LFT56L lamp S " SFT38L lamp S LFT38L lamp S ".500" 4.840" SFT12L LFT12L lamp S ".625" 4.840" SFT58L lamp S " 4.840" LFT58L lamp S3808 P0308 THINIT 3/8" INTERNL S SERIES KISER TOOL OMPNY, IN. Illustrated SPEIFITIONS HRDINGE ORDERING INSTRUTIONS Select the ORDER ODE in the table below that The ORDER ODE for a shank, right hand tool for inserts beginning with 'L' is: LH38 ORDER ODE Dimensions '' '' '' Minimum ore Diameter with 'S' inserts; add.071" for 'L' inserts Includes, lamp and For Inserts eginning With 'S' 'L' lamp Screw Wrench Pin 10-5 Use with left Use with right 4.840" 1.050" SH LH38.500".500" 4.840" 1.290" SH12 LH " 1.050" SH LH38.500".500" 4.840" 1.290" SH12 LH12 lamp S3808 P0204 KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
6 SWISS SREW MHINE & SWISS FE TOOLHOLDERS SWISS SREW ORDERING INSTRUTIONS T H I N I T KISER TOOL OMPNY, IN. 16MM RH L SERIES Illustrated Select the ORDER ODE in the table below that The ORDER ODE for a.500" shank, right hand tool for inserts beginning with 'L' is: LSS12R SWISS TOOLHOLDERS SPEIFITIONS Dimensions Includes, lamp and '' '' '' For Inserts eginning With ORDER ODE lamp Screw Wrench Pin 'S' 'L' 'S' 'L' 'S' 'L' Use with right Use with left SSS38R S ".500" SSS12R LSS12R S5608 S mm 10mm 4.840" SSS10RM S mm 12mm SSS12RM LSS12RM S5608 S mm 16mm SSS16RM LSS16RM S3808 S3808 SSS38L S ".500" SSS12L LSS12L S5608 S mm 10mm 4.840" SSS10LM S mm 12mm SSS12LM LSS12LM S5608 S mm 16mm SSS16LM LSS16LM S3808 S3808 P0305 MDE IN U.S.. 1/2 SSMFE GROOVE L SERIES LSSFG12R TH INIT KISER TOOL OMPNY, IN. Illustrated SWISS FE ORDERING INSTRUTIONS Select the ORDER ODE in the table below that The ORDER ODE for a shank, right hand tool for inserts beginning with 'L' is: LSSFG38R SPEIFITIONS Dimensions Includes, lamp and '' '' '' For Inserts eginning With ORDER ODE lamp Screw Wrench Pin Use with left hand and for counter-clockwise rotation 4.840" SSSFG38R LSSFG38R 'S' 'L' 'S' 'L' 10mm 10mm 4.840" SSSFG10RM LSSFG10RM lamp S5452 KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260) S ".500" 4.840" SSSFG12R LSSFG12R S mm 12mm 4.840" SSSFG12RM LSSFG12RM S mm 16mm 4.840" SSSFG16RM LSSFG16RM S3808 S3808 P0203
7 REVERSILE TOOLHOLDER, STRIGHT & 90 1' REVERSILE SHNK T HINIT KISER TOOL OMPNY, IN. Straight Illustrated T H IN IT KISER TOOL OMPNY, IN. 3/4" REVERSILE SHNK 90 Illustrated ORDERING INSTRUTIONS Select the ORDER ODE in the table below that The ORDER ODE for a shank and a 90 right hand tool for inserts beginning with 'L' is: LRI3434R SPEIFITIONS ORDER ODE Dimensions Includes,, lamp and '' '' '' For Inserts eginning With Only Includes lamp and For Inserts eginning With Straight or 'S' 'L' 'S' 'L' SRE3438 LRE3438 Screws Wrenches.500" SRE3412 LRE each: 1 each: RS " SREH34 LREH34 S " SRE3458 LRE3458 S2808 W1009 RS3458 SRE3434 LRE3434 RS3434 Use as right hand with right hand SRE0134 LRE each: 1 each: RS0134 inserts; Use as left hand with left hand 1.000" 4.840" SREH01 LREH01 S3812 inserts; Use as either 1.000" SRE0101 LRE0101 S2808 W1009 RS0101 hand with centered inserts " SRE1401 LRE each: 1 each: RS " 4.840" SREH14 LREH14 S " SRE1414 LRE1414 S2808 W1009 RS1414 Pin RS3438 lamp lamp lamp Screw: S3808 Wrench: 90 Use with left hand and 90 Use with right hand and SRI3438R LRI3438R RS " SRI3412R LRI3412R 1 each: 1 each: RS " SRIH34R LRIH34R S " SRI3458R LRI3458R S2808 W1009 RS3458 SRI3434R LRI3434R RS3434 SRI0134R LRI0134R 1 each: 1 each: 1.000" 4.840" SRIH01R LRIH01R S3812 P0305 RS " SRI0101R LRI0101R S2812 W1009 RS0101 SRI3438L LRI3438L RS " SRI3412L LRI3412L 1 each: 1 each: RS " SRIH34L LRIH34L S " SRI3458L LRI3458L S2808 W1009 RS3458 SRI3434L LRI3434L RS3434 SRI0134L LRI0134L 1 each: 1 each: 1.000" 4.840" SRIH01L LRIH01L S3812 P0305 RS " SRI0101L LRI0101L S2812 W1009 RS0101 lamp Screw: S3808 Wrench: 10-7 KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
8 ROUND INTERNL & REVERSILE TOOLHOLDERS 1" Illustrated SPEIFITIONS Minimum ore Diameter without pin Dimensions ''.500" '' ROUND INTERNL ORDERING INSTRUTIONS Select the ORDER ODE in the table below that represents your selection of shank orientation and dimensions. The ORDER ODE for a.625", 5.5" long round shank for inserts beginning with 'L' is: Includes, lamp and For Inserts eginning With LR5806 ORDER ODE 'S' 'L' lamp Screw Wrench Pin SR ROUND TOOLHOLDERS or 1.125" Use as right hand with left hand inserts; Use as left hand with right hand inserts; Use as 1.187" either hand with (1.250". for insert beginning with 'LGT').625" SR " SR SR " " SR " LR " LR " LR LR " " LR0112 lamp S3808 P0305 1" 5.5" 5/8" REVERSILE ROE58 THINIT KISER TOOL OMPNY, IN. MDE IN U.S.. Illustrated ROUND REVERSILE ORDERING INSTRUTIONS Select the ORDER ODE in the table below that represents your selection of shank dimensions. The ORDER ODE for a.625" round shank for inserts beginning with 'L' is: LROE58 SPEIFITIONS ORDER ODE Dimensions '' Includes,, lamp and For Inserts eginning With Only Includes lamp and For Inserts eginning With 'S' 'L' 'S' 'L' Screws Wrenches lamp lamp or Use as right hand with right hand inserts; Use as left hand with left hand inserts; Use as either hand with..500" SROE12 LROE12 RROE12.625" SROE58 LROE58 RROE58 1 each: 1 each: SROEH LROEH S5806 W1006 S2810 W1009 SROE34 LROE34 RROE " SROE01 LROE01 RROE01 lamp Screw: S3808 Wrench: KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
9 45 TOOLHOLDERS Note: If groove width is less than.080" it may require a special insert. 45º MDE IN U.S.. 3/4" 45 RIGHT HND L SERIES L4534R THINIT KISER TOOL OMPNY, IN. Illustrated 45 ORDERING INSTRUTIONS Select the ORDER ODE in the table below that The ORDER ODE for a shank, right hand tool for inserts beginning with 'L' is: L453434R SPEIFITIONS ORDER ODE Dimensions Includes, lamp and '' '' '' For Inserts eginning With 'S' 'L' lamp Screw Wrench Pin Use with left hand and centered inserts for counter-clockwise rotation Use with right for clockwise rotation S453438R L453438R.500" S453412R L453412R.625" 4.840" S453458R L453458R S453434R L453434R 1.000" 1.000" S450101R L450101R S453438L L453438L.500" S453412L L453412L.625" 4.840" S453458L L453458L S453434L L453434L 1.000" 1.000" S450101L L450101L lampq lampr S3808 * 0509 * Roll Pin sizes may have changed due to manufacturing updates. s will be shipped with the correct item. Replacement pin (0509) will contain two items (P0204 & P0305) to accomodate either revision KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)
KAISER TOOL COMPANY, INC.
O.D./I.D. THREDING INSERTS D FRONT RKE: 15 RDIUS:.002" or.000" TOP RKE: 0 PROFILE: 60 Insert Shown in Toolholder PRODUT INFORMTION External threading within.046" of a shoulder. Internal threading with
More informationAPPLICATION REFERENCE
O.D./I.D. S Insert Shown in Right Hand Toolholder D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides
More informationKAISER TOOL COMPANY, INC.
SERTS External grooving. Internal Static O-Ring grooving with 1.250" minimum bore diameter. Sub-micron grain DUR-MX 2000 and 5000 arbides. Inserts available with TiN, Ti, TiN and Diamond coating. Insert
More informationKAISER TOOL COMPANY, INC.
U.S. PTENT NOS. 6,688,816 and 6,824,333 S External threading within.070" of a shoulder. Internal ME threading with 1.250" minimum bore diameter. 4 threads per inch and greater. Sub-micron grain DUR-MX
More informationPRODUCT SELECTION GUIDE - TOOLHOLDERS ADAPTERS
PRODUT SELETION GUIDE - TOOLHOLDERS www.thinbit.com/qr7-1 Scan this code for additional information. DPTERS dapters Square and round adapters Use for boring bars and solid carbide tooling THINIT ROUND
More informationU.S. PATENT NOS. 6,688,816 and 6,824,333 INSERT WIDTH TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PG 9-20
U.S. PTENT NOS. 6,688,816 and 6,824,333 SERTS.025",.045",.062",.085" and.115" Parting off up to 1" diameter 0 or 7 lead angle Centered or Offset Sub-micron grain DUR-MX 2000 and 5000 s and High Speed Steel.
More informationO.D./I.D. GROOVING AND TURNING INSERTS .145" .240" ORDERING INSTRUCTIONS
O.D./I.D. GROOVING ND TURNING INSERTS FRONT RKE: CRIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 CK CLERNCE: 2-1/2 both sides SIDE CLERNCE:.004" -.019" - 0 both sides.020" -.150" - 5 both sides
More informationPRODUCT SELECTION GUIDE - FACE GROOVING
PRODUCT SELECTION GUIDE - FACE GROOVING PAGE 2-3 For internal diameters of.125" and larger Groove widths.004"-.250" Solid carbide shanks in 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" diameter FACE GROOVING
More informationtel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
More informationAMERICAN QUALITY AMERICAN VALUE AMERICAN PRIDE
AMERICAN QUALITY AMERICAN VALUE AMERICAN PRIDE FEATURING OVER 48 YEARS OF COMPLETE TOOLING SOLUTIONS FOR GROOVING THREADING PARTING BORING TURNING FACE GROOVING SPECIALS FORM TOOLS MADE IN THE U.S.A. SINCE
More informationGrooving Threading Parting Boring Turning Face Grooving Custom Tooling Form Tools. thinbit.com
Grooving Threading Parting Boring Turning Face Grooving Custom Tooling Form Tools 2014 thinbit.com SECTION 1: GROOVING PG 1-9 GROOVING AND TURNING.004 THROUGH.150 IN.001 INCREMENTS PG 1-13 1.000 DEPTH
More information888 THINBIT 888 THINFAX THINBIT.COM
SINCE 1964 888 THINBIT 888 THINFAX THINBIT.COM GROOVING THREADING PARTING BORING TURNING FACE GROOVING CUSTOM TOOLING FORM TOOLING MILL TOOLING 2018 thinbit.com MADE IN THE USA SECTION 1: GROOVING PG 1-9
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationPage 1-7 Page º(+) TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PGS 9-10, 9-12, 9-18 & 9-20 ORDERING INSTRUCTIONS
U.S. PATENT N. 5,638,728 PRDUCT INFRMATIN 2, 3, 4, 5 and 6mm insert widths. Recessed pocket and raised edge for chip control. Internal grooving, external grooving, face grooving and parting. Sub-micron
More informationCHAPTER C. Width of cut. Tool type. DOC t max. Page number
Step #1: Establish bore diamter Step #2: Find Depth of ut (DO) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths HAPTER DO t max.063
More informationKEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
More informationVEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationSNAP. For more case studies, testimonials, and videos. We are also available on:
www.heuletool.com For more case studies, testimonials, and videos We provide online tool selectors for the COF,, DEF and BSF product groups. Simply enter your application information and the correct tool
More informationGENERAL SAW CORPORATION
GENERL SW ORPORTION Router its and Other Tooling Made in the U.S.. Effective Date: 01/01/2003 2518 ndalusia oulevard ape oral, Florida 33909 Phone: (239) 574-2707 Fax: (239) 574-5328 Plunge arbide Tipped
More informationCOBALT Part Number. Price Each
OMINED DRILL & OUNTERSINKS OMINED DRILL & OUNTERSINKS PLAIN TYPE-60, 82 and 90 Included Angle Used for producing center holes in components or workpieces which requre machining between centers Available
More informationInnovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
More informationBoring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials
oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SLE KRL OOL Shiny black finish. Holder size : 4 x 1/2 x 1/2 Knurl size : 3/4 x 3/8 x 1/4 ncludes 1 Medium ut H.S.S. Knurl. 3230001 KRL OOL HOLDERS SERES 323: MEDA - SPEROR MPOR SERES 930: EALE ROK - SA
More informationStable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
More informationBUY 1 Toolholder and 1 Cartridge. and GET 10 FREE INSERTS! up to $ value. Built for Productivity!
KOOL Cut MODULAR Turning & Grooving System BUY 1 Toolholder and 1 Cartridge 10 FREE INSERTS! up to $229.40 value TM KOOL Cut TM Modular Turning & Grooving Built for Productivity! Interchangeable s & Cartridges
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationLINER MEASURING Made Easy
LINER MESURING Made Easy PHONE: (800) 983-7665 Fax: (888) 834-09 www.poolproducts.com EMIL: customforms@poolproducts.com 54 Newberry Road, East Windsor, T 06088 IMPORTNT: We base our ustom Liner quotes
More informationValue-Added Programs. Refurbishment Service. Refurbishment Delivery Service. Just In Time Inventory Programs. Commodity Management
Value-Added Programs ClappDiCO offers a number of value-added programs that reduces our customers manufacturing costs on a per unit basis. Refurbishment Service A complete refurbishment service to restore
More informationDiamond Burnishing Tools
Diamond Burnishing Tools www.cogsdill.co.uk Diamond burnishing Overview The Cogsdill Diamond Burnishing Tool is designed to produce high quality, low microinch burnished finishes on shafts, large bores,
More information2 edges Tip-Bar for micro boring HP type
2 edges Tip-Bar for micro boring P type New proposal for cost reduction igh cost performance with 2-edge insert Boring Back Boring Grooving ace Grooving Threading rom -edge to 2-edge insert 2 edges Tip-Bar
More informationARNO (UK) Limited We have a passion for precision. Holder 1 see page 3. Holder 35. Holders 70 see page 4. see page 5. Save Over 30% see page 8-10
Promotions - 2017 ARNO (UK) Limited NC - Grooving System The flexible solution for both axial and radial grooving SA Part-Off System With or without through tool coolant see page 2 Holder 1 see page 3
More informationMACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1
MACHINING PROCESSES: TURNING AND HOLE MAKING Dr. Mohammad Abuhaiba 1 HoweWork Assignment Due Wensday 7/7/2010 1. Estimate the machining time required to rough cut a 0.5 m long annealed copper alloy round
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More informationFLO-LOCK. hand of insert. Right. insert groove width. Inch/Metric sizes Example: Inch:.125 = 125 Metric: 1,50 = 150
lo-lock Grooving/hreading Insert Identification hart L G P 3 M 125 type of insert L lo-lock G J U V K P insert style additional info cme lank PI hread ace grooving Grooving UNJ hread ull adius hread Undercut
More informationwith better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
More informationMulti-Purpose Handles Lift, Pull, Cabinet and Finger
Multi-Purpose Handles from UNITED Multi-Purpose Handles Lift, Pull, Cabinet and Finger LIFT Fixtures Cabinets ZINC PLTED WROUGHT STEEL UNITED'S UNIVERSL FVORITE! Strong Simple Quick Installation Widely
More informationPARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning
90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width
More informationNew Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18
More informationMATERIAL & FINISH SPECIFICATIONS INSTALLATION. For Types FH, FHS, FHA, FHL, FHLS, TFH, TFHS, HFH, HFHB, HFHS and HFE studs
MTERIL & FINIS SPEIFITIONS s (1) Fastener Materials Standard Finishes Optional Finish (2) For use in Sheet ardness: External, Precipi- Zinc Per Zinc Per 50 or 55 or 70 or 80 or 85 or 92 or NSI 300 2024-T4
More informationINDEXABLE BORING BAR AND INSERTS FLAT TOP, CHIP CONTROL, CBN, AND PCD
INDEXABLE BORING BAR AND S FLAT TOP, CHIP CONTROL,, AND 80 Diamond.156 IC R.156.040 80 DIAMOND FLAT TOP 80 DIAMOND CHIP CONTROL AT6+ 0.003 ACD5031 ACD5031E AT6+ 0.007 ACD5071 ACD5071E AT6+ 0.015 ACD5151
More informationExternal Turning. Outline Review of Turning. Cutters for Turning Centers
Outline Review of Turning External Turning 3 External Turning Parameters Cutting Tools Inserts Toolholders Machining Operations Roughing Finishing General Recommendations Turning Calculations Machining
More informationINSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
More informationDRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
More informationSINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
More informationAPRIL 2009 / NEW-100 / PAGE 1 OF 13
APRIL 2009 / NEW-100 / PAGE 1 OF 13 The standard UNIDEX line covers reaming applications from 5/16 to 1 1/4 diameter. The single indexable blade and high wear resistant carbide or cermet pads provide a
More informationDRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES
DRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES JOBBER DRILL SETS 13 Piece -1/16-1/4" x 64ths Material Drill Point Finish Brand HSS 118 Bright Precision Twist Drill PTD-090164 $21.15 HSS 118 Black Oxide Precision
More informationALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
More informationValid from. MARcH 1 - AUGUST 31,
Valid from MARcH 1 - AUGUST 31, 2014 www.tungaloyamerica.com 1 Choices: Shellmill Type Holder 1) Buy 20 inserts, receive 1 shellmill at 25% off 2) Buy 30 inserts, receive 1 shellmill at 50% off 3) Buy
More informationUPDATE. NEW Gold-QuadF 09 09mm IC Insert Sizes
Styles: End Mill 15G1F Face Mill 5G5F, 5G6F s: 1.000" - 3.000" Inserts: SDXS0904MPR-MM SDXS0904MPR-MR SDXS0904MPR-MR1 Grades: IN4004 IN4005 IN4030 IN4035 UPDATE NEW Gold-QuadF 09 09mm IC Insert Sizes Features
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step head Rod utter (Front Mount Unit) utter Rods & Kicker Rods Section 10 Model Years 199 199... Model Years 1994 1995... Model Years 1996 004... 4 6 Row 0 w/ 1 1/4 Rods... 5-6 Row w/ 1 1/4 Rods...
More informationInternal Grooving Application Added for ISCAR s Indexable Multifunction Tools
JANUARY Page 1 / 7 Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 2 / 7 Highlights ISCAR is introducing new tools which can carry the current multifunction XCMT-MF
More informationFace Frame Stock Notes - Square
Face Frame Stock - Square FS100 Face Frame Stock - Square Face Frame Stock Notes - Square 1) Pricing Please see Section 1 of the Wholesale Pricing atalog. 2) FS100 Straight lineal square stock run through
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More information8029 S 200th St. Kent, WA USA Ph: Fax:
8029 S 200th St. Kent, WA 98032 USA Ph: 253-872-7050 Fax: 253-395-0230 1 GENERAL INFORMATION Rottler CBN and PCD Inserts are laser marked with our part number on one side. On single sided inserts, the
More informationGEN2 T-A Drill Inserts
7/8 RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts 7 Series HSS iameter Range: 89.10mm - 101.60mm (3.508-4.000 ) T 1 RILLING 144 HSS Inserts - Super obalt HSS Insert Super obalt HSS RMING
More informationMillLine Tungaloy Report No. 429-US www.tungaloyamerica.com Exceptional productivity for aluminum and non-ferrous material machining! www.tungaloyamerica.com MillLine V-shaped bottom secures insert on
More informationGreenslade & Company, Inc. USA
Greenslade Recess TIR Gaging System Patent # 5,182,865 Gage Application: The Recess TIR Gage is designed to make the measurement of the concentricity of the screw s drive system and head O.D. to its shank
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationHow to choose your turning tool
GNRAL TURNING General Turning GNRAL TURNING How to choose your turning tool How to choose your turning tool 1 Overview of tooling alternatives Choose Coromant Capto or shank tool, depending on clamping
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationSpotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
More information45 CUTTING HEAD TILE SAW-BLADE ALIGNMENT PROCEDURE
The of the MK-770 may become misaligned with the Cutting Head of the Tile Saw over time. Should misalignment occur, perform the following steps to realign the Tile Saw. NOTE: If alignment problems are
More informationBall Nose, Flat Bottom and Back Draft Automatic Cutter Replacement Program
all Nose, Flat ottom and ack raft utomatic utter Replacement Program With the purchase of apra all Nose, Flat ottom, ack raft and High-Feed Inserts, receive FR or discounted replacement all Nose, ack raft
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More informationViolet Series, High Precision Drills for Counter Boring VA-PDS-CB. Regrinding Manual. July 23, 2010
Violet Series, High Precision Drills for Counter Boring VA-PDS-CB Regrinding Manual July 23, 2010 MITSUBISHI MATERIALS CORPORATION Carbide & Tools Division Preliminary note Check wear condition and damage
More informationFor boring down to ø.177" with CBN inserts
Keeping the Customer First Tungaloy Report No. 411-US Small CBN insert series NEW For boring down to ø.177" with CBN inserts The World's smallest diameter tool for boring on hardened steels with its *ø.177"
More informationINSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS
INSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. LA-Tool... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
More informationA very warm welcome (Arial, 24-point bold font) Discover what's under the surface (Arial, 20-point bold font in italics)
A very warm welcome (Arial, 24-point bold font) Discover what's under the surface (Arial, 20-point bold font in italics) HORN Technology Days 2015 Longitudinal turning Flexibly producing complex turned
More informationMILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
More informationRight Angle Tools Accessories
Accessories for the No. 15 and 140 Series Right Angle Drills Bushing S125 Series S300 Series Thread Dim A Part No. Dim. A Part No..75-16 L.H. 5.3125 in. (135mm) 5.4375 in. (138mm) 5.4375 in. (138mm) 619143
More informationDRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
More informationKeeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version
Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal
More informationCutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
More informationSURE-GRIP EXPANDING COLLET SYSTEMS
SURE-GRIP EXPNDING COLLET SYSTEMS Turning Milling Grinding Workholding The Hardinge ID Gripping dvantage Years of experience in manufacturing standard expanding collets and special expanding systems brings
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationCARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationINSTRUCTIONS FOR USE B2 FORM KNURLING TOOL
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. B2 Tools... 6 2.1 Technical Data... 6 2.2 Overview: Main components... 7
More informationFIXTURE-PRO MULTI-AXIS QUICK CHANGE FIXTURING
MULTI-XIS QUIK HNGE FIXTURING Introduction Fixture-Pro Modular Workholding Systems... 64-65 rop & Lock Pallet hangers...66-67 Top Tooling...68 Multi-xis Workholding Subplates...69 Risers... 70-71 Rotary
More informationL & T PINS PIN: 12L14 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH HANDLE: 12L14 STEEL, BLACK OXIDE FINISH
ITIONL METERS NOW VILLE! E&E SPEIL PROUTS 700 MILLER RIVE, WRREN, MI 809, 58-978-7 L Pin L & T PINS PIN: L STEEL, RURIZE-HRENE, LK OXIE FINISH HNLE: L STEEL, LK OXIE FINISH T Pin L and T Pins are removable
More informationTable of Contents. Fundamentals of Screw Thread Technology Definitions and Terminology Gage Design Contacts...
1 Distributed by: Gage Crib Worldwide Inc 6701 Old 28th St SE, Suite B Grand Rapids, MI 49546-6937 USA Phone: 001.616.954.6581 Web: www.gagecrib.com Table of Contents SECTION 1: Fundamentals of Screw Thread
More informationRecommended Dimensional Guidelines for Single Screws
The Society of the Plastics Industry s Machinery Component Manufacturers Division Recommended Dimensional Guidelines for Single Screws The following recommendations for single screws of injection molding
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationPREVIEW COPY. Table of Contents. Lesson One Machining Cylindrical Shapes...3. Lesson Two Drilling, Reaming, and Honing...21
Table of Contents Lesson One Machining Cylindrical Shapes...3 Lesson Two Drilling, Reaming, and Honing...21 Lesson Three Lesson Four Machining Flat Surfaces...37 Determining Tolerances and Finishes...53
More informationUNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
More information323 and 365 Series SmoothFlute Variable Helix End Mills
323 and 365 Series SmoothFlute Variable Helix End Mills 323-365 High Speed Machining / HSM as well as traditional milling. Designed for advanced tool path software. Variable Helix where the helix changes
More information, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,.
More informationBack-Spotfacing. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing. & Chamfering TOOLS
COGSDILL TOOL PRODUCTS, INC. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing & Chamfering TOOLS Back-Spotfacing Available from stock for
More informationmodel tsa-sa48 Sliding Crosscut Table installation guide
model tsa-sa48 Sliding Crosscut Table installation guide A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop
More informationDRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
More informationSave Scrap, Time and Money
COMPACT RIGID CUTOFF HOLDER wks with most all pick off and back finish attachments Quickchange Carbide Insert by Manchester Tools Multiple Designs f Flexibility Save Scrap, Time and Money Benefits of New
More informationTungaloy Report. No. 411-US. Small CBN insert series. Expansion of grade. For boring down to ø0.177" with CBN inserts
Tungaloy Report No. 411-US Small CBN insert series Expansion of grade For boring down to ø0.177" with CBN inserts The world's smallest diameter tool for boring on hardened steel and sintered metals down
More informationBurnishing. Burnishing TOOLS & MACHINES SIZE, FINISH & WORK HARDEN FEATURING COMPLETE TOOL AND SPARE PART NUMBERS
Burnishing Burnishing TOOLS & MACHINES SIZE, FINISH & WORK HARDEN FEATURING COMPLETE TOOL AND SPARE PART NUMBERS T H E L E A D E R I N H O L E F I N I S H I N G S O L U T I O N S FOR THE WORLDWIDE MACHINE
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationGrade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09
Grade/Chip breaker Contents Korloy grades system Grade selection system The feature of korloy grades A02 A03 A04 For For For A06 A08 A09 >>> /Chipbreakers Korloy grades system Uncoated P For steel ST05
More informationBNBX Type BNBX L103. Small Hole Boring Bars SUMIBORON
Small ole BNBX Type BNBX Boring & Facing Brazed 3 Newly developed high rigidity slit-clamping system, excellent for small hole boring Maximum overhang of /D=5 possible. Minimal bar deformation produces
More informationRETENTION KNOBS/PULL STUDS
RETENTION KNOS/PULL STUDS LIVE ENTERS LTHE HUKS MDE IN THE US QUNTITY DISOUNTS FOR END USERS! uy 0 or more of any retention knob and receive a 0% Discount! VISE ESSORIES VISE WS We offer arguably the largest
More information15L Slant-PRO TM CNC LATHE
15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT
More information