ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
|
|
- Norman Perkins
- 6 years ago
- Views:
Transcription
1 ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS
2 SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads A heavy duty ball thrust bearing takes all axial thrust Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant Centre Maximum Morse Point Body Body Body Weight of SKODA STM Taper Angle Dia. (in) Dia. (in) Length (in) Work Piece Code No. Price $ Code No. Price $ lb lb lb lb lb lb PARTS FOR HEAVY DUTY LIVE CENTERS Skoda Model #CSN4334M has new design for part # s,3 & 6 (red) All remaining parts are used in both models Parts For Heavy Duty Live Centers Morse -Point -Point M Model 3-Ring 3-Ring M Model 4-Sleeve 5-End Plug 6-Seal 6-Seal M Model Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ M M M M M M M M M M M M M M M 8.00 Morse 7-Roller Bearing 8-Thrust Bearing 9-Ball Bearing 0-Set Screw -Slot Screw -Ring Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $
3 SKODA LIVE CENTERS Skoda Extra Heavy Duty Live Centers - CSN 4335 For clamping of heavy workpieces at lathes. The rigid structure and seating of the turning part is characterized by long service life The model EXTRA is commonly used for work at grinding machines Centers with the apex angle of 60 for reduction of deformations of the machine (tailstock, bed, headstock) from axial clamping forces The live centers are provided with shanks according to DIN 8 and ISO 96 (without clamping thread) Morse D d I L Load Weight Taper (in.) (in) a (in.) (in.) (lb) (lb) Code No. Price $ , , , , SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS Spare Parts For Extra Heavy Duty Live Centers Spare Parts For Extra Heavy Duty Live Centers Parts No. Description Code No. Price $ MT Point Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring MT Point Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring Parts No. Description Code No. Price $ MT Point , Point 30-83, Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring
4 SKODA LIVE CENTERS Skoda Precision CNC Live Centers - CSN 4337-II The centers are intended for NC lathes. Their face parts are formed to allow easy access of the tool to the workpiece, which is an advantage with workpieces of complex shapes A special ring is used to set the radial clearance of the center. It also prevents cutting lubricant from leaking into the center bearing space, and so extends the operational life of the center Spindle-like point extends into shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration Morse D d L l Load Taper (in.) (in) (in.) (in.) (lb) Code No. Price $ SPARE PARTS FOR CNC LIVE CENTERS Spare Parts For CNC Live Centers Spare Parts For CNC Live Centers Parts No. Description Code No. Price $ MT -0 Point Ring Set Ring End Plug Needle Bearing Thrust Bearing Radial Bearing Packing Piece Snap Ring Countersink Screw Lock Screw MT 3-0 Point Ring Set Ring End Plug Needle Bearing Thrust Bearing Radial Bearing Packing Piece Snap Ring Countersink Screw Lock Screw Parts No. Description Code No. Price $ MT 4-0 Point Ring Set Ring End Plug Needle Bearing Thrust Bearing Radial Bearing Packing Piece Snap Ring Countersink Screw Lock Screw MT 5-0 Point Ring Set Ring End Plug Needle Bearing Thrust Bearing Radial Bearing Packing Piece Snap Ring Countersink Screw Lock Screw
5 SKODA LIVE CENTERS Skoda Extended Point Live Centers - CSN 4338 Designed to keep dust, chips and coolant from coming inside the bearings Hardened and ground to 6-65 Rockwell Concentricity within.000" Morse D d L I Load Weight Point Taper (in.) (in) (in.) (in.) (lb) (lb) Angle Code No. Price $ Skoda Heavy Duty Bull Nose Live Centers - CSN 4339 Designed to hold pipe and hollow work. Pipe head can be used as an all-round center for light work. Two matched angular contact bearings preloaded at the factory. This achieves good thrust and radial capacities. Bearings are protected by a combination steel shield and neoprene seal. Accuracy: ±0.000" Morse D d L l Load Weight Taper a (in) (in.) (in.) (in.) (lb) (lb) Code No. Price $ , , ,
6 SKODA LIVE CENTERS Skoda Live Center Sets - CSN 4336 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads A heavy duty ball thrust bearing takes all axial thrust Complete protection of bearings from the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant Morse All A B-G A B C D E F G Taper d l L L D D D D D D D D D D D D D D D Code No. Price $ , ,75.00 Parts For Skoda Live Center Sets Morse Part A Part B Part C Part D Part E Part F Part G Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $ Additional Items For Skoda Live Center Sets Live Center Internal Wooden Drift Morse Only Point Case Key Taper Code No. Price $ Code No. Price $ Code No. Price $ Code No. Price $
7 NAREX BORING AND FACING HEADS Universal Boring And Facing Masterhead Solve ALL Your Boring and Facing Problems Model No. VHU 36 Price $ VHU 56 Price $ VHU 80 Price $ VHU 5 Price $ VHU 60 Price $ Code No , , , , ,90.30 QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREW Operating Accuracy ±.000 ±.000 ±.000 ±.000 ±.000 Boring and facing range from 0 up to Max. adjustability of slide Max. dia. of slide Various automatic slide feeds per revolution graduation of sensitive adjustments ins. on dia. Revolution of sensitive adjustment Quick return per revolution Diameter of tool post holes in slide Height of Head without shank Width of Head Weight of head without shank 4 lb lb 6 lb 6.6 lb 3 lb Accessories , , ,80 Head only , , , , ,949.0 Case only Shank M.T Shank M.T Shank M.T Shank M.T Shank M.T Shank ISA Shank ISA Shank ISA Shank R Shank Straight 3/ Shank Straight Shank Cat Shank Cat Shank BT Shank BT Tang M.T Tang M.T Tang M.T Tang M.T Tang M.T Available only while supplies last. Standard Equipment Supplied With The Master Head In Case Boring bars 3 8 pcs. x 4 x 4-4 x 6-4 x 6 Boring bars 5 8 pcs. x 6 x 6-4 x x Boring bar holders * x 5- * x 5- *- 4 x *- 4 x * pcs. * pcs. * pcs. * pcs. Extension holder 5 8 x x x x x -3 6 Complete set of reinforcing rings Carbide round tool bits *5 8 * * *- 4 *- 4 *4 pcs. *4 pcs. *4 pcs. *4 pcs. HSS square tool bits *5 6 x -3 6 *5 6 x -3 6 *3 8 x -3 3 *3 8 x -3 3 *4 pcs. *4 pcs. *4 pcs. *4 pcs. Reducing sleeve 5 8 x 3 8 x 3 4 x x x 3 4 Reducing sleeve x 5 8 x x x 5 8 7
8 NAREX BORING AND FACING HEADS Principal Component Part of Head Vhu-36. Braking ring. Engaging ring 3. Control ring 4. Scale 5. Slide 6. Setting screw 7. Holes for tools 8. Clamping screws 9. Screw for locking slide in position 0. Stop dog. Stop dog pin. Knob for rapid traverse control (only in Vhu -/4) 3. Lubricator 4. Screw for clutch adjustment 5. Clutch 6. Retaining rod Basic machining operations shown for the Vhu type universal boring heads:. Boring of holes. Spotfacing of small end large-diameter end faces 3. Recessing inside holes 4. Recessing on surfaces of parts 5. Free recessing 6. External diameter machining 7. Boring of tapered holes 8. External machining of taper 9. Facing of rear end faces 0. Thread cutting 8
9 NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 5, 60 VHU 36 9
10 NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 5, 60 CONTINUED 0
11 NAREX BORING AND FACING HEADS Narex Boring And Facing Head Parts VHU-36 (-3/8 ) VHU-56 (-/8 ) VHU-5 (4-7/8 ) New VHU-80 (3-/8 ) VHU-60 (6-/4 ) ID No. Description pcs Code No. Price $ pcs Code No. Price $ pcs Code No. Price $ Cap Screw Ring Flange (Hold-Ring) (vhu-56) (vhu-80) Clutch (Safety pin) Hold Ring (Brake ring) Set Ring Ring (Control Ring) Spring Spring Cap Screw Cover (Lid) Washer Star Gear (Ratchet Wheel) Washer (Ring) Slideguide (vhu-56) (vhu-80) Screw Spring Brake Washer (Ring) Stop Screw Stop (Dog) - L.H. Stop Stop Nut (Insert) Slide , (vhu-56), , (vhu-80), , (Bar) Spring Set Screw Set Screw Set Screw Ball Worm Rod (Screw) (vhu-56) (vhu-80) Washer (Distance Ring) - Spacer End Stop (Back Bearing) End Screw Stop (Dog) - R.H. Stop Gear Ring Spindle (Worm) Worm Gear (Worm Wheel) (Parallel Key) Head Nut Head Screw
12 NAREX BORING AND FACING HEADS Narex Boring And Facing Head Parts VHU-36 (-3/8 ) New ID No P 34P 4P Description Ring (Control Ring) Ball Stop Rod (Bar) Knob (Ball) Screw Spring Point Ball Cap Screw Cap Screw pcs Code No Price $ Plug Ring Clip (Circlip) Parallel key Screw Set Screw Screw Boring tool Ø5mmx3/8"x60mm Boring tool Ø3mmx5/8"x90mm Internal corner tool Ø5mmx3/8"x Internal corner tool Ø3mmx5/8"x Right hand tool S Right hand tool H Left hand tool S Left hand tool H Tool HSS Tool S0 Extension (Boring bar) Extension (Boring bar) Toolholder (Holder with screw) Toolholder (Holder with screw) Collar Set (Set of spacing tubes) Reducer (Reduction sleeve) Reducer (Reduction sleeve) Allen (Hexagon) Wrench "NAREX" Allen (Hexagon) Wrench Hexagon wrench 6 Washer Hex Screw Slide-set consists of parts: Screw-set consists of parts: Worm wheel-set consists of: pcs VHU-56 (-/8 ) VHU-80 (3-/8 ) Code No Price $ pcs VHU-5 (4-7/8 ) VHU-60 (6-/4 ) Code No (vhu-56) (vhu-80) L= L= L= Price $ Distributed By: Pricing in US Dollars subject to change without notice. 46 Dussel Drive Maumee, Ohio Maumee, Ohio Toll Free: Phone: (59) Toll Free Fax: Fax: (59) sales@sowatool.com web: *USAC4* Printed In Canada
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationSKODA LIVE CENTERS. Skoda & Sowa Heavy Duty Live Centers - CSN PARTS FOR HEAVY DUTY LIVE CENTERS. Parts For Heavy Duty Live Centres
Skoda & Sowa Heavy Duty Live Centers - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
STR TOO SUPPY / RN TOO SUPPY TOO POST TURRTS SRIS 00: Tel: 01-18-81 / Fax: 01-9-7 0 Huyler St / So. Hackensack, NJ 070 US TISTOK TURRTS SRIS 00: SOI TH NTRS SRIS 1: Hardened and ground to closest tolerances.
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationEEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More information20" WOODTURNING LATHE Model 3520A
20" WOODTURNING LATHE Model 3520A Instruction Manual & Parts List M-0460221 (800) 248-0144 www.powermatic.com SPECIFICATIONS: 3520A Lathe Table with standard extensions... 28 x 38 Distance Between Centers...
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationSpecifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)
Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of
More informationVhu. Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼. Vhu. Instruction Manual No.:
Instruction Manual No.: 2420304 Vhu Vhu Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼ Producer: Moskevska 63 101 00 Praha 10 Vrsovice Czech Republic Phone: +420 246 002 249 Fax: +420 246 002 335
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More informationComplete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
More informationHeadstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationSE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More information3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
More informationHEADSTOCK (CASTNG & CONTROLS)
HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationHIGH PERFORMANCE LIVE & DEAD CENTERS ROYAL MAKES THE BEST LIVE CENTERS ON EARTH
HIGH PRORMANC LIV & DAD CNTRS ROYAL MAKS TH ST LIV CNTRS ON ARTH WHY DO TOP MANUACTURRS INSIST ON ROYAL LIV CNTRS? Royal live centers are widely regarded by top metalworking professionals as the best live
More informationALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
More informationDIRECTION FOR USE Evid. č
DIRECTION FOR USE Evid. č. 1520304 SAFETY THREAD-CUTTING HEADS Zhb 21, Zhb 31, Zhb 41, Zhb 51 Zhb 21A, Zhb 31A, Zhb 41A Manufacturer: NAREX MTE s.r.o., Moskevská 63, CZ-10100 Praha 10, Czech Republic Tel:
More informationSwing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8"
MODEL KL1640 PLUS Swing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8" Spindle speed L:50-355 rpm, H:352-2500 rpm Spindle number 2 Spindle
More informationPARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT
PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer
More informationPage 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
More informationSECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
More informationHow to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
More informationDUGARD EAGLE. Mega Slant and Mega Turn Heavy Duty CNC Lathes
DUGARD EAGLE Mega Slant and Mega Turn Heavy Duty CNC Lathes Dugard Eagle SS and SA Series Machine Features 60 for SA-Series, 45 for SS-Series slant bed construction ensures maximum stability and convenient
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationMODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
More informationMACHINE VISE + PARALLEL SET
2017 Fall/Winter Flyer Pricing valid from October 1 to January 31, 2018 MACHINE VISE + PARALLEL SET Vises are matched An integral key and large fasteners reduce reflection Chip cover protects lead screw
More informationSECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationColumn & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
More informationTire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationHOW TO ORDER REPAIR PARTS
HOW TO ORDER REPAIR PARTS Should you need repair parts for your lathe the following information is necessary to fill your order promptly and correctly. 1. Complete name and number of the part as listed
More informationSECTION 9: PARTS Stand/Brake/Coolant Pump
SECTION 9: PARTS Stand/Brake/Coolant Pump 8-1 18 3 4 2 8 7 20 6 5 19 7 1 17 23 42 22 21 25 24 31 62 26 27 29 28 30 55 5 56 57 32 33 66 60 61 63 64 22 9 54 53 2 10 10 2 11 10 16 9 58 10 67 10 34 65 35 36
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationEMCOMAT E-200 MC for the m cycle-controlled m
EMCOMAT E-200 MC for the m cycle-controlled m 1 HEADSTOCK Solid cast-iron construction Powerful Siemens drive system Short taper spindle nose with CAMLOCK adaptor Spindle bore diameter ø 53 (50) mm 2 2
More informationFacing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
More informationDUGARD. Machine Tools Since Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines.
DUGARD Machine Tools Since 1939 Dugard HBM-4 / HBM-5 CNC Horizontal Boring Machines www.dugard.com Dugard HBM-4 Horizontal Borer Rotary Table Spindle (BT) Gear Box ATC 60 Tools (OPT) Heavy Loading capacity
More information12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
More informationPrecision & Heavy Duty Machining
High Speed Precision Lathes Large capacity, Powerful, Universal & Precision ATRUMP 18, 21 and 25" Series Lathes have just the right amount of engineering to afford simplicity of operation, coupled with
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationModel No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationOperating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com
More informationRecessing. Recessing. Automatic
Recessing contents Automatic Recessing Tools 2 Overview of Automatic Recessing 4 Tool Selection 5 AR Series Operating Principle 7 AR Automatic Recessing Heads Automatic Recessing GENERATING HEADS & PRECISION
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
More informationHIGH PERFORMANCE LIVE & DEAD CENTERS ROYAL MAKES THE BEST LIVE CENTERS ON EARTH
HIGH PRORMANC LIV & DAD CNTRS ROYAL MAKS TH ST LIV CNTRS ON ARTH WHY DO TOP MANUACTURRS INSIST ON ROYAL LIV CNTRS? Royal live centers are widely regarded by top metalworking professionals as the best live
More informationSAMSUNG Machine Tools
NC Unit Specifications / FANUC Series Item Specification 0i-TD 32i-B i SAMSUNG Machine Tools PL 2000Y/SY PL 2500Y/SY SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea
More informationSECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
More informationRUCKNER. High Performance Live Centres for heavy-duty machining F W ± F S + F F
High Performance Live Centres for heavy-duty machining High concentricity Shaft seal ring protects the bearings from dirt and coolant Housing high quality material, forged, therefore uniform grain structure,
More informationI 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
More informationModel MFC-2 Split Frame Clamshell Operation and Parts Manual
Model MFC- Split Frame Clamshell Operation and Parts Manual Corporate H&S Tool, Inc. Mail: P.O. box Wadsworth, OH Shipping: Weber Dr. Wadsworth, OH U.S.A. Tel: +-0--0 Fax: +-0-- www.hstool.com e-mail:
More informationPARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
More informationUser s Guide. Silent Tools. turning products
User s Guide Silent Tools turning products Introduction This guide will help you to use dampened boring bars (Silent Tools) to achieve the best possible results in internal turning. Silent Tools dampened
More informationSECTION 9: PARTS. Accessories 2-1
SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY
More information3.1 MUELLER LARGE DRILLING MACHINES
MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available
More information3.1 MUELLER LARGE DRILLING MACHINES
MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available
More informationRecessing. contents Automatic Recessing Tools. Recessing. Automatic. Generating Heads. Precision Chamfering Tools
Recessing contents Automatic Recessing Tools 2 Overview of Automatic Recessing 4 Tool Selection 5 AR Series Operating Principle 7 AR Automatic Recessing Heads Automatic Recessing GENERATING HEADS & PRECISION
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationCAT40 Toolholders ER11
CAT40 ER11 CAT40 & Straight Shank ER11 Collet Chucks (Balanced to G2.5@18,000 RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationTM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout
TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout Ex GST Inc GST $23,900.00 $27,485.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres
More information6000, Heavy Duty Drum/Disc Lathe. Parts Identification
6000, 6002 Heavy Duty Drum/Disc Lathe Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More informationCNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationBD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel
BD-405 MINI LATHE Cast iron with ground, hardened slideways Belt driven, with variable speed self-centring 3 jaw scroll chuck Chuck guard with a safety interlock Supplied with 3 jaw chuck, wrench set and
More informationGreenslade & Company Rockwell Hardness Tester, Dial Type
Greenslade & Company Rockwell Hardness Tester, Dial Type Greenslade Hardness Tester Operating Instructions & Parts Manual Please read and save these instructions. Read carefully before attempting to assemble,
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationTrade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
More informationOnyx 90 Media Cutter. Parts Manual
Parts Manual Professional Picture Frame Equipment 441 South Whitted Street Hendersonville, NC 28739 Thank you for purchasing the Onyx 90 Media Cutter. Please read all instructions before operating your
More information