KAISER TOOL COMPANY, INC.

Size: px

Start display at page:

Download "KAISER TOOL COMPANY, INC."

Amice Lawson
5 years ago
Views:

1 O.D./I.D. THREDING INSERTS D FRONT RKE: 15 RDIUS:.002" or.000" TOP RKE: 0 PROFILE: 60 Insert Shown in Toolholder PRODUT INFORMTION External threading within.046" of a shoulder. Internal threading with 1.250" minimum bore diameter. 8 Threads Per Inch and greater. Sub-micron grain DUR-MX 2000 and 5000 arbides and High Speed Steel. Inserts can be coated with TiN, TiIN, TiN and Diamond coating. PRODUT DEMONSTRTION SPEEDS ND FEEDS PPLITION REFERENE TROULESHOOTING TEHNIL SETIONS PG 9-18 PG 9-4 PG ORDERING INSTRUTIONS omplete the in the table below that represents your selection of Threads Per Inch and insert grade. The for an TPI insert in DUR-MX 2000 is: STTD2 SPEIFITIONS INFO. Insert Threads Per Inch Insert Grades See Page 9-5 for expanded material selections and Page 9-18 for Speeds and Feeds information DUR-MX 2000 arbide For Steel & Interrupted utting DUR-MX 5000 arbide For luminum & Non-ferrous High Speed Steel oatings See Page 9-6 for Expanded oating Descriptions Use Uncoated Part Number and dd oating ode TiN TiN TilN Diamond lank Width '' Overall Length 'D' Toolholder atalog Section 7 & 10 Use Toolholders eginning With entered For either right hand or left hand 15 to 56 STTD2 STTD5 STTHS Greater than 56 STTD21 STTD51 STTHS1 8 to 56 LTTD2 LTTD5 LTTHS Greater than 56 LTTD21 LTTD51 LTTHS1 add '' add 'D' add 'E' add 'F'.068".650" add '' add 'D' add 'E' add 'F'.130".721" 'S' Page 10-5 through 10-8 'L' Section 7 Page 10-5 through KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

2 U.S. PTENT NOS. 6,688,816 and 6,824,333 STRIGHT TOOLHOLDERS PRODUT INFORMTION Designed for N, conventional and top slide position on Swiss screw machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. Modifications can be provided on any of our tooling. Please contact us with your application requirements. KISER TOOL OMPNY, IN. MDE IN U.S.. 3/4" GROOVE N TURN LGS34R GROOVING FE GROOVING THREDING PRTING INSERT SELETIONS LGT100D2R LGTTD2R PG 1-9 PG 2-9 PG 4-9 PG 5-3 Scan this code for additional information. ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank dimensions. The for a.750" square shank for inserts beginning with 'L' is: LGS34R SPEIFITIONS Dimensions Includes, lamp and 7-3 Straight Use right hand holder with right hand inserts Use left hand holder with left hand inserts For Inserts eginning '' '' '' With 'L' RIGHT LEFT HND HND.312".500" 4.840" LGS56R LGS56L.375".500" 4.840" LGS38R LGS38L.500".500" 4.840" LGS12R LGS12L.625".625" 4.840" LGS58R LGS58L.750".750" 4.840" LGS34R LGS34L 1.000" 1.000" 4.840" LGS01R LGS01L 1.250" 1.250" 4.840" LGS14R LGS14L 8mm.500" 4.840" LGS08RM LGS08LM 10mm.500" 4.840" LGS10RM LGS10LM 12mm.500" 4.840" LGS12RM LGS12LM 16mm.750" 4.840" LGS16RM LGS16LM 20mm 1.000" 4.840" LGS20RM LGS20LM 25mm 1.000" 4.840" LGS25RM LGS25LM KISER TOOL OMPNY, IN. lamp Screw Wrench Pin : lamp X : lamp Y S3808 W1005 P0206 Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

3 IN U.S. PTENT NOS. 6,688,816 and 6,824,333 90º TOOLHOLDERS PRODUT INFORMTION Designed for N and conventional machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. Modifications can be provided on any of our tooling. Please contact us with your application requirements. 3/4" GROOVE N TURN LGSF34R KISER TOOL OMPNY, IN. MDE U.S.. GROOVING FE GROOVING THREDING PRTING INSERT SELETIONS LGT100D2R LGTTD2R PG 1-9 PG 2-9 PG 4-9 PG 5-3 Scan this code for additional information. ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.750" right hand shank for inserts beginning with 'L' is: LGSF34R SPEIFITIONS Dimensions Includes, lamp and For Inserts eginning With 'L' 90º Use right hand holder with left hand inserts Use left hand holder with right hand inserts '' '' '' RIGHT LEFT lamp Screw Wrench Pin HND HND.312".500" 4.840" LGSF56R.375".500" 4.840" LGSF38R.500".500" 4.840" LGSF12R.625".625" 4.840" LGSF58R LGSF58L.750".750" 4.840" LGSF34R LGSF34L 1.000" 1.000" 4.840" LGSF01R LGSF01L 1.250" 1.250" 4.840" LGSF14R LGSF14L lamp S3808 W1005 P0312 8mm.500" 4.840" LGSF08RM 10mm.500" 4.840" LGSF10RM 12mm.500" 4.840" LGSF12RM 16mm.750" 4.840" LGSF16RM LGSF16LM 20mm 1.000" 4.840" LGSF20RM LGSF20LM 25mm 1.000" 4.840" LGSF25RM LGSF25LM GROOVE 'N TURN TOOLHOLDERS KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND REVERSILE TOOLHOLDERS PRODUT INFORMTION Designed for boring bar positions on all machines. an be used with a boring head to trepan on a mill.

4 U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND REVERSILE TOOLHOLDERS PRODUT INFORMTION Designed for boring bar positions on all machines. an be used with a boring head to trepan on a mill. may need to be shortened. Toolholder reversible by removing face and bottom screws and rotating head 1/2 turn. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. Modifications can be provided on any of our tooling. Please contact us with your application requirements. 1" 5.5" 5/8" REVERSILE ROE58 THINIT KISER TOOL OMPNY, IN. MDE IN U.S.. GROOVING FE GROOVING THREDING PRTING INSERT SELETIONS LGT100D2R LGTTD2R PG 1-9 PG 2-9 PG 4-9 PG 5-3 Scan this code for additional information. ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank dimensions. The for a.625" round shank for inserts beginning with 'L' is: LROE58 SPEIFITIONS Dimensions Includes,, lamp and '' For Inserts eginning With 'L' Only Includes lamp and For Inserts eginning With 'L' Screws Wrenches lamp lamp.500" LROE12 RROE12 or Use as right hand with right hand inserts; Use as left hand with left hand inserts; Use as either hand with centered inserts..625" LROE58 RROE58 1 each: 1 each: LROEH S5806 W1006 S2810 W " LROE34 RROE34 lamp Screw: S3808 Wrench: W " LROE01 RROE KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

5 U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND INTERNL TOOLHOLDERS Designed for boring bar positions on all machines. PRODUT INFORMTION Toolholder reversible for left and right hand orientation. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. Modifications can be provided on any of our tooling. Please contact us with your application requirements. 1" GROOVING FE GROOVING THREDING PRTING INSERT SELETIONS LGT100D2R LGTTD2R PG 1-9 PG 2-9 PG 4-9 PG 5-3 Scan this code for additional information. ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.625" right hand shank for inserts beginning with 'L' is: LR5806 or SPEIFITIONS Minimum ore Diameter Dimensions '' '' Includes, lamp and For Inserts eginning With without pin 'L' lamp Screw Wrench Pin.500" LR " 5.500" LR5806 ROUND TOOLHOLDERS Use as right hand with left hand inserts; Use as left hand with right hand inserts; Use as either hand with centered inserts ".750" LR " LR " " LR0112 lamp S3808 W1005 P0305 KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

6 FLUSHTOP & HRDINGE TOOLHOLDERS THINIT KISER TOOL OMPNY, IN. 3/8" RIGHT HND S SERIES FLUSHTOP ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.375" shank, right hand flushtop tool for inserts beginning with 'L' is: LFT38R SPEIFITIONS Dimensions Includes, lamp and '' '' '' For Inserts eginning With Use with right hand and centered inserts Use with left hand and centered inserts 'S' 'L' lamp Screw Wrench Pin.312".312" 4.840" SFT56R lamp S LFT56R lamp S ".375" 4.840" SFT38R lamp S LFT38R lamp S ".500" 4.840" SFT12R LFT12R lamp S ".625" 4.840" SFT58R LFT58R lamp S3808 W1005 P0308 SFT56L lamp S ".312" 4.840" LFT56L lamp S ".375" 4.840" SFT38L lamp S LFT38L lamp S ".500" 4.840" SFT12L LFT12L lamp S ".625" 4.840" SFT58L LFT58L lamp S3808 THINIT 3/8" INTERNL S SERIES KISER TOOL OMPNY, IN. SPEIFITIONS HRDINGE ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.375" shank, right hand tool for inserts beginning with 'L' is: LH38 Dimensions '' '' '' Minimum ore Diameter with 'S' inserts; add.071" for 'L' inserts Includes, lamp and For Inserts eginning With 'S' 'L' lamp Screw Wrench Pin Use with left hand and centered inserts Use with right hand and centered inserts SH ".375" 4.840" 1.050" LH38.500".500" 4.840" 1.290" SH12 LH12 SH ".375" 4.840" 1.050" LH38.500".500" 4.840" 1.290" SH12 LH12 lamp S3808 W1005 P0204 KISER TOOL OMPNY, IN Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

7 SWISS SREW MHINE & SWISS FE TOOLHOLDERS SWISS SREW ORDERING INSTRUTIONS Use with right hand and centered inserts Use with left hand and centered inserts T H I N I T KISER TOOL OMPNY, IN. 16MM RH L SERIES SPEIFITIONS Dimensions Select the in the table below that represents your selection of shank orientation and dimensions. The for a.500" shank, right hand tool for inserts beginning with 'L' is: LSS12R Includes, lamp and '' '' '' For Inserts eginning With.375".375" lamp Screw Wrench Pin 'S' 'L' 'S' 'L' 'S' 'L' SSS38R S ".500" SSS12R LSS12R S5608 S3808 8mm 8mm SSS08RM S " 10mm 10mm SSS10RM S mm 12mm SSS12RM LSS12RM S5608 S mm 16mm SSS16RM LSS16RM S3808 S ".375" SSS38L S ".500" SSS12L LSS12L S5608 S3808 8mm 8mm SSS08LM S " 10mm 10mm SSS10LM S mm 12mm SSS12LM LSS12LM S5608 S mm 16mm SSS16LM LSS16LM S3808 S3808 W1005 P0305 SWISS TOOLHOLDERS MDE IN U.S.. Use with left hand and centered inserts for counter-clockwise rotation 1/2 SSMFE GROOVE L SERIES LSSFG12R TH INIT KISER TOOL OMPNY, IN. SPEIFITIONS Dimensions SWISS FE ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.375" shank, right hand tool for inserts beginning with 'L' is: LSSFG38R Includes, lamp and '' '' '' For Inserts eginning With.375".375" 4.840" SSSFG38R LSSFG38R KISER TOOL OMPNY, IN. lamp Screw Wrench Pin 'S' 'L' 'S' 'L' 10mm 10mm 4.840" SSSFG10RM LSSFG10RM lamp S5452 Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260) S ".500" 4.840" SSSFG12R LSSFG12R S mm 12mm 4.840" SSSFG12RM LSSFG12RM S mm 16mm 4.840" SSSFG16RM LSSFG16RM S3808 S3808 W1005 P0203

8 REVERSILE TOOLHOLDER, STRIGHT & 90 1' REVERSILE SHNK T HINIT KISER TOOL OMPNY, IN. Straight Illustrated T H IN IT KISER TOOL OMPNY, IN. 3/4" REVERSILE SHNK 90 Illustrated ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.750" shank and a 90 right hand tool for inserts beginning with 'L' is: LRI3434R SPEIFITIONS Dimensions Includes,, lamp and '' '' '' For Inserts eginning With Only Includes lamp and For Inserts eginning With 'S' 'L' 'S' 'L' Screws Wrenches Pin lamp lamp Straight or.375" SRE3438 LRE3438 RS " SRE3412 LRE each: 1 each: RS " 4.840" SREH34 LREH34 S3808 W " SRE3458 LRE3458 S2808 W1009 RS " SRE3434 LRE3434 RS3434 Use as right hand with right hand.750" SRE0134 LRE each: 1 each: RS0134 inserts; Use as left hand with left hand 1.000" 4.840" SREH01 LREH01 S3812 W1005 inserts; Use as either 1.000" SRE0101 LRE0101 S2808 W1009 RS0101 hand with centered inserts " SRE1401 LRE each: 1 each: RS " 4.840" SREH14 LREH14 S3816 W " SRE1414 LRE1414 S2808 W1009 RS1414 lamp Screw: S3808 Wrench: W Use with left hand and centered inserts 90 Use with right hand and centered inserts.375" SRI3438R LRI3438R RS " SRI3412R LRI3412R 1 each: 1 each: RS " 4.840" SRIH34R LRIH34R S3808 W " SRI3458R LRI3458R S2812 W1009 RS " SRI3434R LRI3434R RS " SRI0134R LRI0134R 1 each: 1 each: 1.000" 4.840" SRIH01R LRIH01R S3812 W1005 P0305 RS " SRI0101R LRI0101R S2812 W1009 RS " SRI3438L LRI3438L RS " SRI3412L LRI3412L 1 each: 1 each: RS " 4.840" SRIH34L LRIH34L S3808 W " SRI3458L LRI3458L S2812 W1009 RS " SRI3434L LRI3434L RS " SRI0134L LRI0134L 1 each: 1 each: 1.000" 4.840" SRIH01L LRIH01L S3812 W1005 P0305 RS " SRI0101L LRI0101L S2812 W1009 RS0101 lamp Screw: S3808 Wrench: W KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

9 ROUND INTERNL & REVERSILE TOOLHOLDERS 1" SPEIFITIONS Minimum ore Diameter without pin Dimensions ''.500" '' ROUND INTERNL ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.625", 5.5" long round shank for inserts beginning with 'L' is: Includes, lamp and For Inserts eginning With LR5806 'S' 'L' lamp Screw Wrench Pin SR ROUND TOOLHOLDERS or 1.125" Use as right hand with left hand inserts; Use as left hand with right hand inserts; Use as 1.187" either hand with (1.250" centered inserts. for insert beginning with 'LGT').625" SR ".750" SR SR " " SR " LR " LR ".750" LR LR " " LR0112 lamp S3808 W1005 P0305 1" 5.5" 5/8" REVERSILE ROE58 THINIT KISER TOOL OMPNY, IN. MDE IN U.S.. ROUND REVERSILE ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank dimensions. The for a.625" round shank for inserts beginning with 'L' is: LROE58 SPEIFITIONS Dimensions '' Includes,, lamp and For Inserts eginning With Only Includes lamp and For Inserts eginning With 'S' 'L' 'S' 'L' Screws Wrenches lamp lamp or Use as right hand with right hand inserts; Use as left hand with left hand inserts; Use as either hand with centered inserts..500" SROE12 LROE12 RROE12.625" SROE58 LROE58 RROE58 1 each: 1 each: SROEH LROEH S5806 W1006 S2810 W " SROE34 LROE34 RROE " SROE01 LROE01 RROE01 lamp Screw: S3808 Wrench: W1005 KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

10 45 TOOLHOLDERS Note: If groove width is less than.080" it may require a special insert. SPEIFITIONS 45 ORDERING INSTRUTIONS Select the in the table below that represents your selection of shank orientation and dimensions. The for a.750" shank, right hand tool for inserts beginning with 'L' is: L453434R Dimensions Includes, lamp and '' '' '' For Inserts eginning With 'S' 'L' lamp Screw Wrench Pin Use with left hand and centered inserts for counter-clockwise rotation Use with right hand and centered inserts for clockwise rotation.375" S453438R L453438R.500" S453412R L453412R.750".625" 4.840" S453458R L453458R.750" S453434R L453434R 1.000" 1.000" S450101R L450101R.375" S453438L L453438L.500" S453412L L453412L.750".625" 4.840" S453458L L453458L.750" S453434L L453434L 1.000" 1.000" S450101L L450101L lamp Q lamp R S3808 W1005 * 0509 * Roll Pin sizes may have changed due to manufacturing updates. Toolholders will be shipped with the correct item. Replacement pin (0509) will contain two items (P0204 & P0305) to accomodate either revision KISER TOOL OMPNY, IN. Phone: 888-THINIT ( ) or (260) Fax: 888-THINFX ( ) or (260)

APPLICATION REFERENCE

APPLICATION REFERENCE O.D./I.D. GROOVING INSERTS Insert Shown in D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides RDIUS: