FMAX. Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. TOOLS NEWS. High Feed Finish Milling Cutter for Aluminum Alloys
|
|
- Abigayle Day
- 6 years ago
- Views:
Transcription
1 High Feed Finish Milling Cutter for s TOOLS NEWS Update B216G FMAX Item Expansion Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. By CG image
2 High Feed Finish Milling Cutter for s FMAX Ultra High Efficiency Machining The ultra fi ne pitch design is ideal for high effi ciency machining (F 20 m/min). Internal coolant and a special chip breaker wall (body protector) provides ideal chip discharge performance. Body Protector Internal Coolant Graphical Representation. The body protector on the rake face forms chip shapes ideal for disposal and disperses them away from the body. Internal coolant also aids this process. The body is compatible with all center through coolant arbors. Designed for High Speeds Anti fly dovetail clamping mechanism. Angled Face Dovetail Clamp Light Weight, High Rigidity Body A special alloy steel and aluminum body combine to provide rigidity and light weight. 1 Standard Through Coolant Arbor Special Alloy Steel 1 1 Except ø50mm and ø63mm.
3 High Precision, Easy Setting The combination of both a large and micro screw provides precise run-out adjustment and for adjusting new or re-grinding inserts (5 ɥm or better). Large Adjustment Screw Micro Adjustment Nut Economy, Multi-use A maximum re-grinding allowance of 0.6 mm is possible on both the peripheral and bottom edges. New PCD Grade for Machining DC=50, 63mm GAMP 5 2
4 High Feed Finish Milling Cutter for s FACE MILLING FMAX <HIGH FEED FINISHING> 90 P M K N S H Steel Stainless Steel Cast Iron Non-ferrous Metal Diffi cult-to-cut Materials Hardened Steel Finishing Fig.2 ø80 Fig.3 ø100 ø125 Fig.1 ø50 ø63 KWL y Cutter Body DC=mm, DCON=inch LCCB DCSFMS DCON KWW DAH DCCB DC L8 CBDP LF KAPR LCCB DCSFMS DCON KWW DAH DCCB DC L8 CBDP LF KAPR LCCB DCSFMS DCON KWW DAH DCCB DC L8 CBDP LF KAPR KAPR : 90 GAMP : +5 GAMF : -5 0 Right hand tool holder only. With Coolant Hole 2 WT RPMX DC Order Number Stock No.T LF DCON (kg) (min -1 Fig. ) 50 FMAX-050A08R a FMAX-050A10R a FMAX-063A10R a FMAX-063A12R a FMAXR08010C a FMAXR08014C a FMAXR10012D a FMAXR10018D a FMAXR12516E a FMAXR12524E a mm or less is the recommended maximum depth of cut for ultra high effi ciency machining. 2 Number of Teeth Spare Parts DC Tool Holder Type Insert Clamp Screw Micro Adjustment Nut Large Adjustment Screw Balance Adjustment Screw Cutter Set Bolt Wrench T10 Wrench ø FMAX-050 TSS04505S KSN2 KSS2 HSS04004G HSC10030H TKY10T RKY25S 63 FMAX-063 TSS04505S KSN2 KSS2 HSS04004G HSC10030H TKY10T RKY25S 80 FMAX-080 TSS04505S KSN2 KSS2 HSS05005G HSCX12030H TKY10T RKY25S 80 FMAXR080 TSS04505S KSN2 KSS2 HSS05005G HSCX12030H TKY10T RKY25S 100 FMAX-100 TSS04505S KSN2 KSS2 HSS06006G HSCX16035H TKY10T RKY25S 100 FMAXR100 TSS04505S KSN2 KSS2 HSS06006G HSCX16035H TKY10T RKY25S 125 FMAX-125 TSS04505S KSN2 KSS2 HSS08008G HSCX20035H TKY10T RKY25S 125 FMAXR125 TSS04505S KSN2 KSS2 HSS08008G HSCX20035H TKY10T RKY25S Clamp Torque (N m) : TSS04505S=3.5 Please refer to the instruction manual included in the cutter body for how to locate the insert and adjust the run-out. 3 a : Inventory maintained in Japan.
5 Metric Standard DC=mm, DCON=mm KAPR : 90 GAMP : +5 GAMF : -5 0 With Coolant Hole 2 WT RPMX DC Order Number Stock No.T LF DCON (kg) (min -1 Fig. ) 50 FMAX-050A08R a FMAX-050A10R a FMAX-063A10R a FMAX-063A12R a FMAX-080B14R a FMAX-100B18R a FMAX-125B24R a mm or less is the recommended maximum depth of cut for ultra high effi ciency machining. 2 Number of Teeth Mounting Dimension DCON DC Order Number CBDP DAH DCCB LCCB DCSFMS KWW L8 KWL Fig FMAX-050A08R FMAX-050A10R FMAX-063A10R FMAX-063A12R FMAXR08010C FMAXR08014C FMAX-080B14R FMAXR10012D FMAXR10018D FMAX-100B18R FMAXR12516E FMAXR12524E FMAX-125B24R
6 High Feed Finish Milling Cutter for s Inserts Shape Order Number Class Stock L W1 S BS RE L GOER1404PXFR2 MD2030 a GOER1408PXFR2 MD2030 a BS W1 5 RE 5 S AN 10 a : Inventory maintained. (PCD inserts are available in 1 piece in one case) Features of New PCD Grade MD2030 Diamond Sintered Segment Containing Ultra Microparticle Diamond Optimized grade for milling. Improved fracture resistance during interrupted machining. Offers a highly stable cutting edge that prevents burrs and gives an excellent surface fi nish. MD205 Bond of Diamond Particles Bond Wear Resistance MD220 MD230 MD2030 Diamond Particles Binding Material Diamond Particles : Give a highly stable cutting edge performance because of the Fracture Resistance strong bonding. Re-grinding of an Insert The maximum material to be re-grinding is 0.6 mm. Use similar inserts after re-grinding to maintain balance. Problems may occur if the cutter isn't balanced correctly. After re-grinding the minor edge will reduce in size and may affect surface fi nishes. Check the diameter offset after fi tting re-grinding inserts. Please contact us regarding optimum re-grinding conditions. Max 0.6 mm Max 0.6 mm Minor Cutting Edge 5
7 Recommended Cutting Conditions Work Material Characteristics Grade vc (m/min) ae ap fz (mm/t.) N 0.2 DC ( ) Si 12.5% MD ( ) 0.5 DC ( ) 0.08 ( ) 0.8 DC 0.2 DC ( ) ( ) Si 12.5% MD ( ) 0.5 DC ( ) 0.08 ( ) 0.8 DC ( ) Please adjust the depth of cut depending on the width of cut. Finished Surface Roughness (Rz) Finished Surface Roughness Rz (μm) <Cutting Conditions> Work Material : ADC12 Cylinder Head Tool : FMAXR12524E Insert : GOER1408PXFR2 Grade : MD2030 Revolution : min -1 Feed Rate : 0.08 mm/t. Depth of Cut : ap = 2.0 mm ae = 68 mm x 3 pass Cutting Mode : Internal Through Coolant 4MPa Revolution n (min -1 ) Effective Chip Disposal Range 3 Depth of Cut ap % 40% 60% 80% 100% Depth of Cut (Width of Cut ae) / Cutter Dia. DC 6
8 Application Examples Cutter Body Insert (Grade) FMAXR10018D GOER1408PXFR2 (MD2030) FMAXR08014C GOER1408PXFR2 (MD2030) Workpiece Cutting Conditions Revolution (min -1 ) Cutting Speed (m/min) Feed Rate (mm/t.) Table Feed (mm/min) Depth of Cut Width of Cut Cutting Mode Wet Cutting Wet Cutting Machine Horizontal Type Horizontal Type Results Increased effi ciency with a table feed increase x 2.6, FMAX achieved good surface fi nishes and increased machining stability. Increased effi ciency with a table feed increase x 2.2, FMAX achieved good surface fi nishes and increased machining stability. The above application examples are customer's application examples, so it can be different from the recommended conditions. For Your Safety adon't handle inserts and chips without gloves. aplease machine within the recommended application range and exchange expired tools with new ones in advance of breakage. aplease use safety covers and wear safety glasses. awhen using compounded cutting oils, please take fire precautions. awhen attaching inserts or spare parts, please use only the correct wrench or driver. awhen using rotating tools, please make a trial run to check run-out, vibration and abnormal sounds etc. MITSUBISHI MATERIALS CORPORATION Overseas Sales Dept, Asian Region KFC bldg., 8F, Yokoami, Sumida-ku, Tokyo , Japan TEL FAX Overseas Sales Dept, European & American Region KFC bldg., 8F, Yokoami, Sumida-ku, Tokyo , Japan TEL FAX (Tools specifications subject to change without notice.) EXP-14-E ( - )
TOOLS NEWS B216B. High Feed Finish Milling Cutter FMAX. Feed Maximum (FMAX) Milling cutter for ultra efficient and accurate finishing.
TOOLS NEWS B216B Feed Maximum () Milling cutter for ultra efficient and accurate finishing. By CG image Ultra high efficiency machining The ultra fi ne pitch design is ideal for high effi ciency machining
More informationB216E FMAX FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING
FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING B216E FMAX 2018.04 FMAX HIGH FEED MILLING CUTTER FOR FINISHING ULTRA HIGH EFFICIENCY MACHINING The ultra fine pitch design
More informationFMAX FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING HIGH FEED MILLING CUTTER FOR FINISHING
FMAX FEED MAXIMUM (FMAX) MILLING CUTTER FOR ULTRA EFFICIENT, HIGH ACCURACY FINISHING HIGH FEED MILLING CUTTER FOR FINISHING FMAX HIGH FEED MILLING CUTTER FOR FINISHING ULTRA HIGH EFFICIENCY MACHINING The
More informationNon-chattering Side Cutter
TOOLS NEWS Exchangeable Inserts Side Cutter Series B242G New Product Non-chattering Side Cutter Vertical blade double-sided insert VAS0 VAS0 VOS0 ASX0 1 Classified Side cutter VAS0 VOS0 ASX0 Features of
More informationTOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs!
TOOLS NEWS Hydro-Clamp Type Valve Finisher HVF Series B218G New Product Drastically shortened time and reduced costs! Cooperated with Hydro-Clamp Type Valve Finisher HVF Series Greatly Reduced Costs The
More informationTOOLS NEWS B228G. Ceramic End Mills. CERAMIC Corner Radius End Mills. Ultra high productivity for nickel based heat resistant alloys CERAMIC
Ceramic End Mills TOOLS NEWS B228G CERAMIC Corner Radius End Mills Ultra high productivity for nickel based heat resistant alloys CERAMIC CERAMIC End Mill Series From difficult-to-cut to easy-to-cut! Generation
More informationImproved Efficiency for Slot Milling with Deep Depths of Cut
TOOLS NEWS B230G Corner Radius End Mill for High Efficiency Titanium Alloy Machining New Product Improved Efficiency for Slot Milling with Deep Depths of Cut Corner Radius End Mill for High Efficiency
More informationTOOLS NEWS B076G. Series Expansion Update
TOOLS NEWS 2013.10 Update B076G Solid CBN Grade for Cast Iron and Sintered Alloy Good balance of wear and fracture resistance from the high-performance sintering technology. New solid CBN for improved
More informationHigh Precision Violet Series Drills for Counter Boring VA-PDS-CB Exclusive design for counter boring.
212.12 Update B159B New sizes included High Precision Violet Series Drills for Counter Boring Exclusive design for counter boring. y Innovative cutting edge geometry for high performance counter boring.
More informationDrill for Wheel Hubs. Solid Carbide Drill MHE
. Update B3G Expanded New Grade Solid Carbide Drill Uniue design provides superior hole accuracy for shallow hole drilling. Effective drilling of hub bolt holes can be achieved. Additional new grade DP30
More informationTOOLS NEWS MP6100/MP7100/MP9100
New PVD Coated Grades TOOLS NEWS 2014.11 Update B208G MP6100/MP7100/MP9100 Specialised grades for specific materials. New PVD Coated Grades MP6100/MP7100/MP9100 Wide range of grades for specifi c materials
More informationAHX ECONOMICAL, HEPTAGONAL DOUBLE SIDED INSERTS WITH 14 CUTTING EDGES MULTI CORNER INSERT FACE MILLING CUTTERS
AHX ECONOMICAL, HEPTAGONAL DOUBLE SIDED INSERTS WITH 14 CUTTING EDGES MULTI CORNER INSERT FACE MILLING CUTTERS AHX MULTI CORNER INSERT FACE MILLING CUTTERS AHX440S IDEAL FOR ROUGHING AT HIGH FEEDS ON LOWER
More informationAXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E
TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining
More informationHighly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy.
B041G CDV for stainless steel turning Excellent toughness in relation to notch wear resistance. Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy. yminimizing
More informationOptimum tool for finish machining
Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining
More informationLeading edge technology for high efficiency steel turning
TOOL NEWS New CVD Coated Grade for High Speed Steel Turning 2013.4 Update B165A /RP Breaker Expansion Leading edge technology for high efficiency steel turning 2 in 1 technology ensures longer tool life.
More informationKeeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version
Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal
More information3AFK 3AFK. For Aluminum Machining. 3-Flute End Mill for High Efficiency and Precision. Solid End Mill
Solid End Mill For Machining 3-Flute End Mill for High Efficiency and Precision High Efficiency with 3-Flutes. Excellent Precision Machining Stable Machining due to sharp edge for Anti-chattering Performance
More informationIndexable ball end mill for finishing. ABPFN type. Ball Precision F ABPFN type. New Product News No.1606E
Indexable ball end mill for finishing ABPFN type Ball Precision F ABPFN type New Product News No.1606E-1 2017-6 High cutting performance by S-shaped cutting edge! High helix edge shape provides a beautiful
More informationDouble Clamp Series TOOLS NEWS. New Clamp Bridge Simple and highly rigid clamping. Single Action Type B091G Update
Single Action Type TOOLS NEWS 2015.5 Update 091G Double Series New Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts.
More informationDouble-Side 45 Face Milling
5 Double-Side 45 Face Milling 23 of 26 Double-Side 45 Face Milling SNEU+MFB145&MFB245 Introduction Double-side general 45 face milling; Thicker negative insert design, with high strength, to assure stability.
More informationMFH High Efficiency and High Feed Cutter
Milling MFH High Efficiency and High Feed Cutter MFH High Efficiency and High Feed Cutter Resistant to chattering with 3D convex cutting edge. Multi-functional cutter for ramping, helical milling, etc.
More informationHPC FACE MILLS for rough and finish machining
HOLLFELDER CUTTING TOOLS THE ORIGINAL HPC FACE MILLS for rough and finish machining THE ULTIMATE EVOLUTION! AXIALLY CLOSED CHIP FLUTES EXTREMELY HIGH NUMBER OF CUTTING EDGE FOR FINISH MACHINING CUTTERS
More informationTAW Drill. Indexable insert drill, yet always stable drilling. Stable drilling with indexable drill B060A. MIRACLE Coated VP15TF
B060A Stable drilling with indexable drill Indexable insert drill, yet always stable drilling Grade for high rigidity and longer tool life MIRACLE Coated MIRACLE coating displays high welding resistance
More informationHigh Feed Finishing of Cast Iron. High Feed Finishing of Cast Iron. High Feed Finishing of Non- Ferrous Metal/Thin Work Pieces.
157 to 173 igh Feed Finishing of Cast Iron SEC- Series... 158 GFXC13000 Type... 162 GFX 16000 Type... 163 GFS 13000 Type... 164 GRF 17000 Type... 165 GRM 17000 Type... 166 GRV 16000 Type... 167 IG igh
More information4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material
For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material
More informationMetal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More informationTP2P. Tangen-Pro. Tangential Shoulder Milling Tool
Tangen-Pro TP2P Tangential Shoulder Milling Tool This milling tool series with its tangential clamping system increases stable machining and productivity, while improving perpendicularity Superior Clamping
More informationUPDATED. PCD & CBN Tangential Milling. Features:
Diameters Metric: 5.0 mm 50 mm Inch:.0 0.0 Bodies Cylindrical Shell Type Integral on request UPDATED PCD & CBN Tangential Milling TEDIFEED is the newest line of mill with tangential inserts available with
More informationNo Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter,
NEW PRODUCT NEWS No.0 Patent Pending Super Excellent INI AS Type Grade for processing high-hardness materials Grade for processing stainless-steel materials Introducing new JP/J coating Small tool diameter,
More informationDouble-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
More informationNPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
More informationSimple and highly rigid clamping
New 091G Single Action Type DOULE CLAMP SERIES Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts. Series expansion.
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationNew Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18
More informationMillLine Tungaloy Report No. 429-US www.tungaloyamerica.com Exceptional productivity for aluminum and non-ferrous material machining! www.tungaloyamerica.com MillLine V-shaped bottom secures insert on
More informationMEC Series. Low cutting force, reduced chattering and high efficiency machining. High efficiency end mills and face mills
High efficiency end mills and face mills MEC eries MEC eries ow cutting force, reduced chattering and high efficiency machining arge lineup for various applications New PD5 grade for machining aluminum
More informationIndexable Milling Tools
Tools Difference and selection between down milling and up milling X Vf Vf Y B Up milling magnified X Dowm milling magnified Y Climb milling (also called down milling): the feed direction of workpiece
More informationNew Generation Coated CBN Grades
TOOL NEW 2017.11 Update B215A Coated CBN-eries for Hardened teel Turning BC8100 eries Item Expansion New Generation Coated CBN Grades Wear and fracture resistance greatly improved for a wide range of continuous
More information15 Lead Angle D1~D9 MSRS15 MSE15 D2-D8 D9
15 1~9 15 MSE15 2~9 28 9 Heavy Milling Face Mill MonSteR M S R Square Mill Conventional Tools Metal removal rate is drastically increased Square (4edge) type Face Mill 15 Roughing takes place in one pass.
More informationCarbide Miniature Drill with Oil Hole WHMB-TH MINIATURE DRILL WHMB. New Product News No.1603E
Carbide Miniature Drill with Oil Hole MINIATUE DI WHMB New Product News No.1E- 1-9 MINIATUE DI WHMB drills small-diameter holes with high efficiency and high accuracy. Features of 01 02 0 04 New flute
More informationIncreases the feed rate up to. 400% using 4 inserts! Compared with competitor's cutter. The Ultra High Feed Chamfer Mill
The Ultra High eed Chamfer Mill CATAOG No. - ong Type Hexagon Increases the feed rate up to 00% using inserts! Compared with competitor's cutter Eccentric Design for Tapped Holes New series exclusively
More informationXMR01 XMR01. Indexable Milling Tools. High feed milling cutters B 119. Specification of tools XMR01 XMR01. S type insert, straight shank.
Tools S type insert, straight shank Specification of tools Stock ØD L1 L ød Number of teeth Z asic dimensions(mm) Weight (kg) 0 1 0. -0-G-SD09-0 1-0-G-SD09-0 1-0-G-SD1-0 1-0-G-SD1-0 1 1. Stock available
More informationMMT series. MMT series for precise and efficient threading. New Threading Tools
New ing Tools 2005.6. Update B053G Expanded Insert MMT series MMT series for precise and efficient threading Series expanded, additional M-class inserts with 3-D chip breakers Tough new grade, VP15TF for
More informationThink efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
More informationNEW. MILLLINE High Speed Milling Cutter. Exceptional productivity for aluminum and non-ferrous machining. Keeping the Customer First
Keeping the Customer First Tungaloy Report No. 429-US MILLLINE High Speed Milling Cutter NEW Exceptional productivity for aluminum and non-ferrous machining NEW CHIPBREAKER Outstanding productivity in
More informationPRODUCT NEWS PFC/MPF NEW PRODUCT. No. 303 DIJET INDUSTRIAL CO., LTD. Ø 50, Ø 63, Ø 80: 6 Items. Ø 30, Ø33, Ø 40: 3 Items. Face Mill type.
PRODUCT NEWS No. 303 NEW PRODUCT Face Mill type PFC/MPF Ø, Ø 63, Ø 80: 6 Items Heads type Ø 30, Ø33, Ø 40: 3 Items Up & Down From semi-finishing to super finishing on slide seat surface. High speed up
More informationBestellinformationen RAL
Bestellinformationen RAL90 2016-07-01 Shoulder milling too RAL90 insert for milling N Dimensions, mm, inch Medium RE Ordering code W1 LE S BS 15 0.50 KPHT 15 04 05 FR-CM H13A 10.7 14.0 4.60 0.9 0.020.420.590.180.035
More informationPRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series
PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material
More informationM-FOUR (MEW) 90 Milling with Double-sided 4-edge Inserts. Low Cutting Forces with Chatter Resistance for Excellent Surface Finish
M-FOUR (MEW) 9 Milling with Double-sided 4-edge Low Cutting Forces with Chatter Resistance for Excellent urface Finish Economical 4-edge Insert MEWH Helical End Mill Added Improved Toolholder Durability
More informationMilling Cutter for Heavy Roughing
15 15 Milling Cutter for Heavy Roughing Notched insert reduces cutting force, chattering and enables efficient cutting. Large depth of cut and high feed rate enable high effi ciency cutting. TZE00047 changes
More informationAutomotive solutions for ISO K
Automotive solutions for ISO K When machining in ISO K materials, you need tough tools that can withstand high abrasive wear and frittering, and deliver secure and precise machining again and again. This
More informationKORLOY Indexable new generation drill KING DRILL
KORLOY Indexable new generation drill KING DRILL Optimized insert design for maximum drilling efficiency KING DRILL Code system of holder K 5D - 0 07 KING/KORLOY Aspect ratio(l/d) D,.5D, 3D, 3.5D, 4D,
More informationReaming. MAPAL MonoReam. Systematic versatility NEW
Reaming MAPAL MonoReam Systematic versatility NEW MAPAL MonoReam With the newly developed multi-bladed reamers in the 600, 700 and 800 series, MAPAL is offering a new, simple, highperformance, standardised
More informationMiniature shoulder milling cutter with incomparable stability
MillLine Tungaloy eport No. 56-US TUCE-EC Miniature shoulder milling cutter with incomparable stability 2 TUCE-EC 2 TU TU TU TU TU TU TU T C C C C C C C C C CE- E- E- E- E- E- E- E- E E E E E E E C ACCELEATED
More informationIndexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
More informationDRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
More informationCarbide Drill for Hardened Steel EHSE-TH. Epoch TH Hard Drill. New Product News No.405E
Carbide Drill for Hardened Steel Epoch TH Hard Drill New Product News No.0E- 17-7 TH coating and guides with double margins make it last even longer. EDM, which is generally used for drilling hardend steel,
More informationB223E DLE MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING
MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING 2018.10 B223E MULTI-FUNCTIONAL - FOR CENTERING AND CHAMFERING Centering Hole Chamfering Edge Chamfering V-grooving FEATURES THINNED POINT GEOMETRY
More informationTechnical Information for Power Buster
Technical Information for ower Buster Recommended cutting condition ISO Workpiece NC5330 NC335 0.0040.008 0.0040.008 0.0040.008 vg(sfm) High speed NC5330 NC335 Carbon steel 919755591 820656525 755591492
More informationSolid carbide drill WSTAR 5XD DRILL B026A. Superior design wavy cutting edge & flute geometry
Excellent multi-purpose applications from general steel to nickel based alloys A wide application range from.125 to.7812 inch. Sharp cutting edge performance and smooth chip discharge B26A Solid carbide
More informationKeeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling
Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes
More informationMEW Series MEW. 90 Milling with Double Sided 4-edge Inserts
9 Milling with Double ided -edge Inserts 9 Milling with Double ided -edge Inserts eries Low Cutting Forces Equivalent to Positive Inserts with Chattering Resistance for Excellent urface Finish Economical
More informationApplication range. feed rate (mm/rev) 0.1~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~0.
Grades KORLOY Chip Breaker For Turning VG 0.1~0.35 0.5~2.5 For finishing Ensures stable chip flow even at very small depth of cut. Suitable for copying. VQ 1.0~3.0 For Medium to Finish Cutting Strong cutting
More informationCopy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
More informationCost reduction Cost reduction Cost reduction
Cost reduction Quality, performance, value - Guaranteed! Work-Piece Cutting Speed vc(sfm) ISO Material Hardness (HB) Hardness (HRC) PC5300 PC5400 P Carbon steel C = 0.10-0.35% 80~180 10~ 459~886 328~820
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationEpoch CFRP series ECH/X-SD, ECN/W-HD. Epoch CFRP End Mill, Epoch CFRP Trim Cutter. New Product News No.1403E
Epoch CFRP series ECH/X-SD, ECN/W-HD Epoch CFRP End Mill, Epoch CFRP Trim Cutter New Product News No.10E- 017-7 Adopt special flute shape reduces cutting force. Achieves the improvement of machining efficiency
More informationDRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency.
MagicDrill DRC type High efficiency drill module Larger cutting diameters now available High efficiency High reliability High feed rate High quality lineup SS-DRC (Straight Shank) Machining diameters:
More informationNC Spot Drill with Patented indexable carbide insert.
with Patented indexable carbide insert. High Efficiency! Low Cost! CNC Lathes, CNC Turning Centers and Machining Centers. One tool will perform multiple applications. Long tool life. Each insert has four
More informationBNBX Type BNBX L103. Small Hole Boring Bars SUMIBORON
Small ole BNBX Type BNBX Boring & Facing Brazed 3 Newly developed high rigidity slit-clamping system, excellent for small hole boring Maximum overhang of /D=5 possible. Minimal bar deformation produces
More informationFPK 4 FPK 6 FPK 4 FPK 6. Tool Milling Machines. Universal Machine Tools including 3-axis position indicator.
Tool Milling Machines Universal Machine Tools including 3-axis position indicator FPK 4 Travel X-axis 15.7 / 12.2 in (man. / autom.) Table dimensions 12.6 x 29.5 in FPK 6 Travel X-axis 23.6 / 22 in (man.
More informationDRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
More informationChapter 23: Machining Processes: Turning and Hole Making
Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations
More informationHigh Efficiency Finishing Special Shape Tool Series. GF3L type. GALLEA series. New Product News No.1802E
High Efficiency Special Shape Tool Series GLLE series GF3L type New Product News No.12E 18-1 GLLE series 6th, GF3L type Lens tool for semi-finishing to finishing machining on gentle curved surfaces and
More informationJANUARY 2007 / NEW-072 / PAGE 1 OF 7
JANUARY 2007 / NEW-072 / PAGE 1 OF 7 Ingersoll TaeguLine introduces HEX-TURN, a new, unique addition to the turning product line that offers exceptional performance and cost saving benefits. The 12 cutting
More informationNew Item & New Concept Tools Aqua EX Flat Drill
New Item & New Concept Tools Aqua EX Flat Drill Completely Flat Point Angle! (Point Angle 180 ) Multi-Function Drill Covering Wide Application Range Aqua EX Flat Drill Sharpness & Rigidity at the Same
More informationCP157-E. Heavy Milling. MSR Type. BT50 Integral Arbor type. Heavy Milling Cutter. PR830(For Steel) PR905(For Cast Iron) New! Low resistance insert
CP157-E Heavy Milling Type Heavy Milling Cutter BT50 Integral Arbor type PR830(For Steel) PR905(For Cast Iron) New! MonSteR M S R Mill Low resistance insert Heavy Milling Cutter Advantages Nicked insert
More informationNew. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
More informationbotek Solid drill head Type 70 A,70 B
DEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS Solid drill head botek Type 70 A,70 B Deep hole drilling tools, system BTA with indexable inserts and guide pads for solid drilling Drilling range: 5,00 64,99
More informationGrade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09
Grade/Chip breaker Contents Korloy grades system Grade selection system The feature of korloy grades A02 A03 A04 For For For A06 A08 A09 >>> /Chipbreakers Korloy grades system Uncoated P For steel ST05
More informationFeatures. Excellent Repeatability >> Applications >>
Chamfer Mill 45 >> Nine9 chamfer mill is designed for chamfering and countersinking with an indexable insert. The insert is a specifically designed for use in high speed machining ; the multiple flutes
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationCOFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock
Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and
More informationDRV DRV. MagicDrill. High Efficiency Indexable Insert Drill
High Efficiency Indexable Insert Drill High Efficiency Indexable Insert Drill MagicDrill Economical Inserts with 4 Cutting Edges. Excellent Chip Evacuation with 6D Maximum Deep-Hole Drilling D to 6D Drilling
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationNo: Features. Facing Shouldering Slotting Ramping down Helical Ramping Through Coolant System
No: 0-1 Features - Rich Mill Series, as a new concept tool for milling application, offer improved tool life and increase of usable cutting edge adopting innovative double sided insert with unique geometries.
More informationHOLLFELDER CUTTING TOOLS. Main Catalog H6
HOLLFELDER CUTTING TOOLS Main Catalog H6 HOLLFELDER-GÜHRING CUTTING TOOLS Your competent partner in the area of metal chip removal. At our two company locations in Nuremberg und Zorbau (Germany) we design
More informationHybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining
No.011-USA April 2009 Small diameter endmills able to handle various machining modes Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining Hybrid TAC Mills provide
More informationWhy settle for 2 cutting edges when you can have 3 on one insert?
MillLine www.tungaloyamerica.com Tungaloy Report No. 421-US TUNG-TRI Why settle for 2 cutting edges when you can have 3 on one insert? ACCELERATED MACHINING 2 TUNG-TRI MillLine Tung-Tri s economical insert
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationExcellent for Swiss type automatic machine applications! MSTAR End Mill for Swiss type machine tools B074A MSTAR END MILL SERIES
B074A MSTAR END MILL SERIES MSTAR End Mill for Swiss type machine tools Excellent for Swiss type automatic machine plications! Overall length suitable for small automatic lathe machining. (35mm and 45mm)
More informationChange!! Change I Change II Change III Change IV. Magic Drill DRX DRX
Drilling DRX Magic Drill DRX Magic Drill DRX Change!! The total product lineup is now complete! ø1~ø60 D,3D,4D,5D Change I Change II Change III Change IV New Technology: Twisted coolant hole New Concept:
More informationHigh Feed Radius End Mill for Hardened Steel EHHRE-TH3. Epoch High Hard Radius. New Product News No.1709E
High Feed Radius End Mill for Hardened Steel EHHRE-TH Epoch High Hard Radius New Product News No.709E 07- dopt the design of indexable high-feed cutter to solid end mill. High feed cutting for high hardness
More informationMilling Series. Product Lineup M4. Milling Indexable Inserts. Milling Inserts Identifi cation System M9 Milling Inserts. Corner Angle 45 MOF45
1~12 eries Product ineup Indexable Inserts Inserts Identifi cation ystem Inserts 1 Corner Angle OF 22 OFX Easy edge adjustment 2 E 2 E-F Easy edge adjustment 28 D 1 O- / O / O- 2 Corner Angle R P / E Corner
More informationMultipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
More informationSolid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
More informationIndustrial Solutions of KORLOY GEAR INDUSTRY. We Create your Tomorrow! is-em-3-01
Industrial Solutions of KORLOY GEAR INDUSTRY We Create your Tomorrow! 20100830 is-em-3-01 We learn the challenge with nature. We also dream love in nature. Challenge for dream, Love for human It s an ideal
More information