TAW Drill. Indexable insert drill, yet always stable drilling. Stable drilling with indexable drill B060A. MIRACLE Coated VP15TF
|
|
- Dwain Hodge
- 5 years ago
- Views:
Transcription
1 B060A Stable drilling with indexable drill Indexable insert drill, yet always stable drilling Grade for high rigidity and longer tool life MIRACLE Coated MIRACLE coating displays high welding resistance therefore it can be used for machining a wide range of workpiece materials such as Plain steels, Mild steels, Carbon steels,stainless steels and Cast iron.
2 Indexable Insert Drill Features Unique design ensures extreme sharpness and accuracy Exclusive design cutting edge enables superior chip control Original serrated geometry maintains accuracy Undulating Cutting Edge Concave part of insert engineered into cutting edge achieves sharp cutting performance. Convex part of insert allows for strong cutting edge. Mitsubishi's Unique Serration Geometry Mitsubishi's unique serration structure allows excellent clamping accuracy to be maintained. Insert with extraordinary tool life Use of MIRACLE coated delivers exceptional tool life. Cutting edge shape High durability body Special surface treatment applied to high heat resistant special alloy steel body increases resistance to corrosion and abrasion. MIRACLE coating (Al,Ti)N Micro-grain cemented carbide TF15 Features of Welding-resistant MIRACLE coated can be used in a wide range of materials from general steel to carbon steel, alloy steel, stainless steel, cast iron etc. Economy No Regrinding Eliminates burdensome regrinding and recoating of brazed drills. Eliminates quality trouble that may occur in regrinding of brazed drills. (Decreased tool life resulting from dimensional changes after regrinding) Reduced Reduces stock of holders for each diameter inserts as inserts with different diameters can be installed on the same body which is more economical. Easy handling Can replace an insert easily just by loosening a clamp screw. 1
3 Cutting Performance OVER SIZE SURFACE ROUGHNESS Over size (µinch) Brazed type drill(our product) Competitor A`s insert type drill Surface roughness (µinch) Brazed type drill(our product) Competitor A`s insert type drill Feed (IPR) Feed (IPR) <Cutting conditions> Workpiece : ANSI 1045( HB) Drill Diameter : ø20mm(l/d=5) Cutting Speed : 260SFM Coolant : Emulsion 10% Pressure : 0.5MPa(Internal Coolant) <Cutting conditions> Workpiece : ANSI 1045( HB) Drill Diameter : ø20mm(l/d=5) Cutting Speed : 260SFM Coolant : Emulsion 10% Pressure : 0.5MPa(Internal Coolant) LIFE OF INSERT POWER CONSUMPTION 12 Brazed type drill (MITSUBISHI) Competitor A`s insert type drill Power consumption (Kw) mm/rev 0.3mm/rev Cutting length (ft) Drill Diameter (inch) <Cutting conditions> Workpiece : ANSI 1045( HB) Coolant : Emulsion 10% Drill Diameter : ø20mm(l/d=5) Pressure : 0.5MPa(Internal Coolant) Cutting speed : 330SFM Feed :.010IPR <Cutting conditions> Workpiece : ANSI 1045( HB) Cutting speed : 260SFM Coolant : Emulsion 10% Pressure : 0.5MPa(Internal Coolant) 2
4 3 TAWDrill D1 L3 L1 D4 D8 L/D=3 ød1 ød4 D8 L1 L3 INDEXABLE INSERT DRILL : Inventory maintained. Holder Insert Dimensions (inch) Drill Dia. (inch) Clamp Screw Wrench Plate Anti-seize Lubricant INCH STANDARD Internal Coolant
5 4 D1 L3 L1 D4 D8 L/D=5 ød1 ød4 D8 L1 L3 Holder Insert Dimensions (inch) Drill Dia. Clamp Screw Wrench Plate Anti-seize Lubricant INCH STANDARD Internal Coolant (inch)
6 5 TAWDrill S1 D1 D1 S1 INDEXABLE INSERT DRILL Geometry Dimensions (inch) Applicable Holder Inch Metric INSERTS INCH STANDARD : Inventory maintained. (2 inserts in a case)
7 6 TAWDrill D1 L3 L1 D4 (l/d) ød1 ød4 L1 L3 METRIC STANDARD Holder Insert Dimensions (mm) Drill Dia. Clamp Screw Wrench Plate Anti-seize Lubricant Hole Depth (mm) Internal Coolant : Inventory maintained. : Inventory maintained in Japan.
8 7 TAWDrill D1 L3 L1 D4 (l/d) ød1 ød4 L1 L3 INDEXABLE INSERT DRILL : Inventory maintained. : Inventory maintained in Japan. Holder Insert Dimensions (mm) Drill Dia. Clamp Screw Wrench Plate Anti-seize Lubricant Hole Depth (mm)
9 8 S1 D1 D1 S1 Geometry Dimensions (mm) Applicable Holder Inch Metric INSERTS METRIC STANDARD : Inventory maintained. (2 inserts in a case)
10 9 TAWDrill S1 D1 D1 S1 INDEXABLE INSERT DRILL Geometry Dimensions (mm) Applicable Holder Inch Metric : Inventory maintained. (2 inserts in a case)
11 RECOMMENDED CUTTING CONDITIONS P M K Workpiece Mild Steel Carbon Steel Alloy Steel Drill Diameter Conditions Hardness Stainless Steel Tensile Strength Cast Iron Tensile Strength Ductile Cast Iron ø.5625ø.6094 ø.6250ø.7188 ø.7344ø.8438 Cutting Speed Feed Cutting Speed Feed Cutting Speed Feed (SFM) (inch/rev) (SFM) (inch/rev) (SFM) (inch/rev) P M K Workpiece Mild Steel Carbon Steel Alloy Steel Stainless Steel Cast Iron Ductile Cast Iron Drill Diameter Conditions Hardness Tensile Strength Tensile Strength ø.8594ø.9531 ø.9688ø ø1.0938ø Cutting Speed Feed Cutting Speed Feed Cutting Speed Feed (SFM) (inch/rev) (SFM) (inch/rev) (SFM) (inch/rev) Notes on Use INSERT INSTALLATION. Loosen clamp screw of holder to install insert.. Mesh the insert serration to holder grooves.. Fasten the clamp screw using the provided torque wrench while holding rake face of the insert lightly with your thumb. (Figure 1). Check that there is no clearance between the insert bottom and holder flute end. (Figure 2) NG Figure 1 Figure 2 Clearance NOTE ON INSERT REPLACEMENT. Clean insert guide grooves of a used holder by blowing air before installing a new insert. Remove heavy dirt in the holder serration and holder slits using the provided plate. 10
12 Tsukuba Plant Registration No. 00GRC-EA010 Gifu Plant INDEXABLE INSERT DRILL TAWDrill APPLICATION EXAMPLES Holder Insert (Grade) ANSI 4140 (34HS) ø21 Workpiece ANSI 1045 (200HB) ø18 Cutting Conditions Component Cutting Speed (SFM) Feed (IPR) Revolution (min -1 ) Feed Rate (inch/min) Coolant Machine Shank Type Ring W.S.O (Internal coolant) Machining center Ring gear W.S.O (Internal coolant) Machining center No. of hole No. of hole Result Competitor's Competitor's Holder Insert (Grade) Workpiece Alloy Steel ø16.1 ANSI 4130 ø27 Cutting Conditions Component Cutting Speed (SFM) Feed (IPR) Revolution (min -1 ) Feed Rate (inch/min) Coolant Machine Shank Type Machine parts W.S.O (Internal coolant) Machining center Bit W.S.O (Internal coolant) NC lather Result No. of hole No. of hole Competitor's Competitor's For your safety Do not touch cutting or chips without wearing gloves. Use tools under recommended cutting conditions, and exchange tools before excessive wear occurs. Chips become extremely hot, scattered over and may be stretched. Ensure safety guards and goggles are used. In case of using non-water soluble oil, make sure to have a fire prevention countermeasure. Use the provided wrench spanner, and ensure the inserts and spare parts are damped securely. ISO Registration No. JSAQ 080 Gifu Plant ISO Registration No. JSAQ 094 Tsukuba Plant ISO Registration No. JSAE Eastman Street, Irvine, California 92614, U.S.A TEL FAX Customer Service: (800) Technical Support: (800) Chicago Branch Office: 2401 Hassell Road, Northwest Tech Centre, Suite 1540, Hoffman Estates, Illinois 60195, U.S.A TEL FAX Detroit Branch Office: Country Club Drive, Suite A-1, Farmington Hills, Michigan 48331, U.S.A TEL FAX Toront Branch Office: 6535 Millcreek Drive, Unit 63 & 64, Mississauga, Ontario, Canada L5N 2M2 TEL FAX Av. La Cañada No.16, Parque Industrial Bernardo Quintana, El Marques, Queretaro, CP Mexico TEL / / FAX Mitsubishi Carbides Home page : (Tools specifications subject to change without notice.) Printed in U.S.A. 09/04
Solid carbide drill WSTAR 5XD DRILL B026A. Superior design wavy cutting edge & flute geometry
Excellent multi-purpose applications from general steel to nickel based alloys A wide application range from.125 to.7812 inch. Sharp cutting edge performance and smooth chip discharge B26A Solid carbide
More informationExcellent for Swiss type automatic machine applications! MSTAR End Mill for Swiss type machine tools B074A MSTAR END MILL SERIES
B074A MSTAR END MILL SERIES MSTAR End Mill for Swiss type machine tools Excellent for Swiss type automatic machine plications! Overall length suitable for small automatic lathe machining. (35mm and 45mm)
More informationAdditional line up of Inch Sizes debut!
NEW Solid End Mills MSTA B083A Long Neck Series Inch Sizes Additional line up of Inch Sizes debut! Solid End Mills MSTA Additional line up of Inch Sizes debut! Long Neck Series Inch Sizes MS2XL - Inch
More informationdrill MITSUBISHI CARBIDE New Products LJ293A Large diameter sizes added. Solid carbide drill
MITSUBISHI CARBIDE LJ293A New Products Solid carbide drill Large diameter sizes added. MZ drill Internal and external coolant, multi purpose high performance drill. MZ drill, characteristics and application
More informationCoating LJ403A. Additional Series. Metric End Mill Series. Dependable Quality and Performance. New PVD coating. high efficiency machining
LJ0A New PVD coating Coating Achieving high speed, high efficiency machining and long tool life Additional Series Dependable Quality and Performance Metric End Mill Series Features of A wide variety of
More informationHighly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy.
B041G CDV for stainless steel turning Excellent toughness in relation to notch wear resistance. Highly efficient machining of difficult-to-cut materials, such as stainless steal and superalloy. yminimizing
More informationDrill for Wheel Hubs. Solid Carbide Drill MHE
. Update B3G Expanded New Grade Solid Carbide Drill Uniue design provides superior hole accuracy for shallow hole drilling. Effective drilling of hub bolt holes can be achieved. Additional new grade DP30
More informationLeading edge technology for high efficiency steel turning
TOOL NEWS New CVD Coated Grade for High Speed Steel Turning 2013.4 Update B165A /RP Breaker Expansion Leading edge technology for high efficiency steel turning 2 in 1 technology ensures longer tool life.
More informationHigh Precision Violet Series Drills for Counter Boring VA-PDS-CB Exclusive design for counter boring.
212.12 Update B159B New sizes included High Precision Violet Series Drills for Counter Boring Exclusive design for counter boring. y Innovative cutting edge geometry for high performance counter boring.
More informationStable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationMulti-Drill Type SMD. Sumitomo Multi-Drills with Replaceable and Regrindable Heads. Programme Expansion:
TOOLING NEWS E-99 P M K N S H Sumitomo Multi-Drills with Replaceable and Regrindable Heads Multi-Drill Type SMD Prograe Expansion: Large Hole MTL Type - High Drilling Accuracy Drill Diameter up to Ø 4,5
More informationKeeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version
Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal
More informationHigh percision clamping system Cutting edge produces good surface finishes. Holder with superb durability TPDB. Top Solid Piercing Drill Blade
Paleari Carlo S.a.s. di Pellegatta Annamaria & C. Via Asmara, 7-252 BUSTO ARSIZIO (VA) Tel. 01 3000 - Fax 01 3414 info@palearicarlo.com RIVENDITORE UNICO PER L'ITALIA High percision clamping system Cutting
More informationDRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
More informationTOOLS NEWS B076G. Series Expansion Update
TOOLS NEWS 2013.10 Update B076G Solid CBN Grade for Cast Iron and Sintered Alloy Good balance of wear and fracture resistance from the high-performance sintering technology. New solid CBN for improved
More informationTOOLS NEWS B218G. Hydro-Clamp Type Valve Finisher HVF. New Product. Series. Drastically shortened time and reduced costs!
TOOLS NEWS Hydro-Clamp Type Valve Finisher HVF Series B218G New Product Drastically shortened time and reduced costs! Cooperated with Hydro-Clamp Type Valve Finisher HVF Series Greatly Reduced Costs The
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationCost reduction Cost reduction Cost reduction
Cost reduction Quality, performance, value - Guaranteed! Work-Piece Cutting Speed vc(sfm) ISO Material Hardness (HB) Hardness (HRC) PC5300 PC5400 P Carbon steel C = 0.10-0.35% 80~180 10~ 459~886 328~820
More informationInnovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
More informationNon-chattering Side Cutter
TOOLS NEWS Exchangeable Inserts Side Cutter Series B242G New Product Non-chattering Side Cutter Vertical blade double-sided insert VAS0 VAS0 VOS0 ASX0 1 Classified Side cutter VAS0 VOS0 ASX0 Features of
More informationOptimum tool for finish machining
Series Expansion Indexable Ball-nose End Mill for Finishing Indexable Corner Radius End Mill for Finishing 2011.2 Update B065E SRF/SRB SUF High accuracy indexable end mill Optimum tool for finish machining
More informationDRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency.
MagicDrill DRC type High efficiency drill module Larger cutting diameters now available High efficiency High reliability High feed rate High quality lineup SS-DRC (Straight Shank) Machining diameters:
More informationKORLOY Indexable new generation drill KING DRILL
KORLOY Indexable new generation drill KING DRILL Optimized insert design for maximum drilling efficiency KING DRILL Code system of holder K 5D - 0 07 KING/KORLOY Aspect ratio(l/d) D,.5D, 3D, 3.5D, 4D,
More informationDouble-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
More informationDRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
More informationNEW INDEXABLE DRILL FOR HOLE MAKING
No:160-3 NEW INDEXABLE DRILL FOR HOLE MAKING Features - Excellent chip evacuation due to the specially designed flute - Special surface treatment of shank provides long durability - 4 cutting-edge using
More informationMMT series. MMT series for precise and efficient threading. New Threading Tools
New ing Tools 2005.6. Update B053G Expanded Insert MMT series MMT series for precise and efficient threading Series expanded, additional M-class inserts with 3-D chip breakers Tough new grade, VP15TF for
More informationMiniature shoulder milling cutter with incomparable stability
MillLine Tungaloy eport No. 56-US TUCE-EC Miniature shoulder milling cutter with incomparable stability 2 TUCE-EC 2 TU TU TU TU TU TU TU T C C C C C C C C C CE- E- E- E- E- E- E- E- E E E E E E E C ACCELEATED
More informationSPD & NPD Drill NEW INDEXABLE DRILL FOR HOLE MAKING. No: Features
No:1-2 NEW INDEXABLE DRILL FOR HOLE MAKING SPD & NPD Drill Features Excellent chip evacuation. Special surface treatment. 4 corner use insert, same insert used for both inner & outter position cutting
More informationTOOLS NEWS B216B. High Feed Finish Milling Cutter FMAX. Feed Maximum (FMAX) Milling cutter for ultra efficient and accurate finishing.
TOOLS NEWS B216B Feed Maximum () Milling cutter for ultra efficient and accurate finishing. By CG image Ultra high efficiency machining The ultra fi ne pitch design is ideal for high effi ciency machining
More informationTDX. Range extended with new AH725 grade, for steels and stainless steels! Highest Productivity with Maximum Performance! Concept
Keeping the Customer First Tungaloy Report No.021-USA TAC Drills / New TDX type TDX Concept Range of drills from ø0.500" ~ 2.00" L/D = 2xD, 3xD, 4xD, 5xD Full Line up Available! Highest Productivity with
More informationIndexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
More informationOptimized design of inserts for maximum drilling efficiency
KORLOY Indexable new generation drill KING DRILL Optimized design of s for maximum drilling efficiency Excellent cutting performance and chip control due to the optimized geometry and chip breaker of both
More informationTechnical Information for Power Buster
Technical Information for ower Buster Recommended cutting condition ISO Workpiece NC5330 NC335 0.0040.008 0.0040.008 0.0040.008 vg(sfm) High speed NC5330 NC335 Carbon steel 919755591 820656525 755591492
More informationNew Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationSimple and highly rigid clamping
New 091G Single Action Type DOULE CLAMP SERIES Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts. Series expansion.
More informationKeeping the Customer First. Tungaloy Report No. 409-US. Indexable drill NEW. TDS type TUNGALOY. The most economical solution for drilling!
Keeping the Customer First Tungaloy Report No. 409-US Indexable drill NEW TDS type TUNGALOY The most economical solution for drilling! Features Double-sided insert with 6-cutting edges TungSix-Drill is
More informationImproved Efficiency for Slot Milling with Deep Depths of Cut
TOOLS NEWS B230G Corner Radius End Mill for High Efficiency Titanium Alloy Machining New Product Improved Efficiency for Slot Milling with Deep Depths of Cut Corner Radius End Mill for High Efficiency
More informationTOOLING NEWS E-140. Sumitomo Multi-Drills with Replaceable and Regrindable Heads. Multi-Drill Type SMD. Programme Expansion: 12 x D K N S H
TOOLING NEWS E-140 Sumitomo Multi-Drills with Replaceable and Regrindable Heads Multi-Drill Type SMD Prograe Expansion: 1 x D P M K N S H Multi-Drill Heads Front screw clamp design MultiDrill design +
More informationHybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining
No.011-USA April 2009 Small diameter endmills able to handle various machining modes Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining Hybrid TAC Mills provide
More informationIndexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
More informationIncreases the feed rate up to. 400% using 4 inserts! Compared with competitor's cutter. The Ultra High Feed Chamfer Mill
The Ultra High eed Chamfer Mill CATAOG No. - ong Type Hexagon Increases the feed rate up to 00% using inserts! Compared with competitor's cutter Eccentric Design for Tapped Holes New series exclusively
More informationAXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E
TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining
More informationKYOCERA Cutting Tools Drilling Catalog
2013 KYOCERA Cutting Tools Drilling Catalog 2013 Drilling Catalog Table of Contents KYOCERA Company Overview How to Order Kyocera Cutting Tools iv v Drilling Product Lineup & Inserts 1-2 Summary of Drilling
More informationGENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON Electromagnetic Iron can be readily machined when proper tool angles are used. Tools should be ground to more acute cutting edge angles than are
More informationMELIN TOOL COUNTERSINKS
MELIN TOOL COUNTERSINKS TABLE OF CONTENTS GENERAL PURPOSE Zero Flute, Single Edge - HSS Zero Flute, Single Edge - Cobalt HSS Single Flute - HSS Single Flute - Cobalt HSS (M42) Single Flute, TiN Coated
More informationNew Item & New Concept Tools Aqua EX Flat Drill
New Item & New Concept Tools Aqua EX Flat Drill Completely Flat Point Angle! (Point Angle 180 ) Multi-Function Drill Covering Wide Application Range Aqua EX Flat Drill Sharpness & Rigidity at the Same
More informationFor boring down to ø.177" with CBN inserts
Keeping the Customer First Tungaloy Report No. 411-US Small CBN insert series NEW For boring down to ø.177" with CBN inserts The World's smallest diameter tool for boring on hardened steels with its *ø.177"
More informationJANUARY 2007 / NEW-072 / PAGE 1 OF 7
JANUARY 2007 / NEW-072 / PAGE 1 OF 7 Ingersoll TaeguLine introduces HEX-TURN, a new, unique addition to the turning product line that offers exceptional performance and cost saving benefits. The 12 cutting
More informationDrilling Tools. Common problems and solutions for drilling. Problem Cause Solution. Bend,distortion and slippage of machine and workpiece
Drilling Tools for solid carbide drills C Common problems and solutions for drilling Problem Cause Solution Drill breakage Bend,distortion and slippage of machine and workpiece Increase the rigidity of
More informationRich line up of indexable drills for various
DrillLine Tungaloy Report No. 377-US TUNGDRILLTWISTED Rich line up of indexable drills for various machining needs ACCELERATED MACHINING DrillLine Excellent surface finish and stable chip evacuation due
More informationA660A OIL & GAS APPLICATIONS
A660A OIL & GAS APPLICATIONS INDEX Oil & Gas COUPLING 3 6 INNER SLEEVE 4 7 BOP 5 FLANGED ROCK BIT INNER SLEEVE BOP INNER SLEEVE BOP FLANGED COUPLING COUPLING 2 ROCK BIT ROCK BIT COUPLING Work Materials:
More informationDRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
More informationCat.3a Super Power Drill Super Drill
www.jic-tools.com.tw Cat.3a Super Power Drill Super Drill WE HAVE INVESTED RESOURCES IN THE DESIGN & MANUFACTURE OF INSERTED CUTTERS Cost Saving Our innovative tooling design upgrades productivity and
More informationBoring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials
oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -
More informationG02 KRLOY Drills DRILLS. Technical Information for Drills. Solid Drills. Indexable Drills. Reamer G73 G76 G77 G78 G81
Technical Information for Drills 02 KRLOY Drills 04 Available Insert Indexable Drills 06 Technical Information for KIN DRILL 12 KIN DRILL 16 Technical information of KIN DRILL (for large diameter drilling)
More informationSNAP. For more case studies, testimonials, and videos. We are also available on:
www.heuletool.com For more case studies, testimonials, and videos We provide online tool selectors for the COF,, DEF and BSF product groups. Simply enter your application information and the correct tool
More informationMillLine Tungaloy Report No. 429-US www.tungaloyamerica.com Exceptional productivity for aluminum and non-ferrous material machining! www.tungaloyamerica.com MillLine V-shaped bottom secures insert on
More informationHertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
More informationB223E DLE MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING
MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING 2018.10 B223E MULTI-FUNCTIONAL - FOR CENTERING AND CHAMFERING Centering Hole Chamfering Edge Chamfering V-grooving FEATURES THINNED POINT GEOMETRY
More information4/5/6RFH 4/5/6RFH NEW. High Efficiency Roughing End Mill for Difficult-to-Cut Material
For Difficult-to-Cut Material High Efficiency Roughing End Mill 4/5/6RFH High Efficiency Roughing End Mill for Difficult-to-Cut Material 4/5/6RFH NEW High Efficiency Machining of Difficult-to-Cut Material
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationNo: Features. Facing Shouldering Slotting Ramping down Helical Ramping Through Coolant System
No: 0-1 Features - Rich Mill Series, as a new concept tool for milling application, offer improved tool life and increase of usable cutting edge adopting innovative double sided insert with unique geometries.
More informationTungaloy Report. No. 411-US. Small CBN insert series. Expansion of grade. For boring down to ø0.177" with CBN inserts
Tungaloy Report No. 411-US Small CBN insert series Expansion of grade For boring down to ø0.177" with CBN inserts The world's smallest diameter tool for boring on hardened steel and sintered metals down
More informationCylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
More informationTPDB. Top Solid Piercing Drill Blade. Multi-functional machining with strong clamping system and new technology
Top Solid Piercing Drill Blade Multi-functional machining with strong clamping system and new technology High precision clamping system Cutting edge produces good surface finishes Holder with superb durability
More informationBASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
More informationFMAX. Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. TOOLS NEWS. High Feed Finish Milling Cutter for Aluminum Alloys
High Feed Finish Milling Cutter for s TOOLS NEWS 2017.4 Update B216G FMAX Item Expansion Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. By CG image High Feed Finish Milling
More informationLower Spindle Power Consumptionn
ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix
More informationNew. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
More informationFlexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
More information90 Indexable Positive Milling Cutter
90 Indexable Positive Cutter Inserts HIGH POSITIVE 90 MILLING CUTTER Cutting Rake - 20 for 11 positive 85 parallelogram AP inserts Application TOOL ANGLES: Cutting Rake +20 Axial Rake 6 Radial Rake -6
More informationIABP4F/ABP4F. Four Flute Indexable Ball End Mills for High Efficiency Finishing SHANK STYLE MODULAR STYLE FEATURES
Four Flute Indexable Ball End Mills for High Efficiency SHANK STYE MODUA STYE FEATUES Four flute design provides improved productivity compared to traditional two-flute design adius tolerance of ±0.01mm
More informationKeeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling
Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes
More informationCarbide Drill for Hardened Steel EHSE-TH. Epoch TH Hard Drill. New Product News No.405E
Carbide Drill for Hardened Steel Epoch TH Hard Drill New Product News No.0E- 17-7 TH coating and guides with double margins make it last even longer. EDM, which is generally used for drilling hardend steel,
More informationAutomotive solutions for ISO K
Automotive solutions for ISO K When machining in ISO K materials, you need tough tools that can withstand high abrasive wear and frittering, and deliver secure and precise machining again and again. This
More informationMachining Strenx and Hardox. Drilling, countersinking, tapping, turning and milling
Machining and Drilling, countersinking, tapping, turning and milling and are registered trademarks. These steel grades are manufactured only by SSAB. high strength steel and wear plate are steel grades
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More information20 LEAD FACE MILL SERIES DM6G, DM5G
20 LEAD FACE MILL SERIES DM6G, DM5G Diameters Cutting Edge Length Insert Corner 1.500" to 8.000".230".030"R Facing Lead Angle Coolant Thru K H 70º.23 D3 D 1 D 2 D 3 Coolant Thru Effective Cutter Number
More informationVEX-S. Combination Drill with Front & Back Chamfering of Through Holes. tip combined with patented SNAP. chip control.
Combination Drill with Front & Back Chamfering of Through Holes tip combined with patented SNAP chip control blade replacement Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 HEULE is setting new
More information-treme thread cutting. Tiny Tools. New Products. Metric
TM -treme thread cutting Tiny Tools New Products Metric 2014-2015 Tiny Tools Broaching Tools for Hexagon Keys - HK The HK broaching system have been developed to machine internal keyways inside blind or
More information3AFK 3AFK. For Aluminum Machining. 3-Flute End Mill for High Efficiency and Precision. Solid End Mill
Solid End Mill For Machining 3-Flute End Mill for High Efficiency and Precision High Efficiency with 3-Flutes. Excellent Precision Machining Stable Machining due to sharp edge for Anti-chattering Performance
More informationPRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series
PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material
More informationMetal Cutting Processes 1 - Turning
You are here: Home > Handout > Metal Cutting Processes 1 - Turning Metal Cutting Processes 1 - Turning Contents 1. Introduction 2. Center Lathe 3. Cutting Tools 4. Basic Matel Cutting Theory 5. Tool Angles
More informationTOOLS NEWS B228G. Ceramic End Mills. CERAMIC Corner Radius End Mills. Ultra high productivity for nickel based heat resistant alloys CERAMIC
Ceramic End Mills TOOLS NEWS B228G CERAMIC Corner Radius End Mills Ultra high productivity for nickel based heat resistant alloys CERAMIC CERAMIC End Mill Series From difficult-to-cut to easy-to-cut! Generation
More informationOperating instruction for the quick-change adapters type:
type: EM 00 - U EM 01 - U EM 03 - U EM 04 - U EM 05 - U EM 01 U / IKZ EM 03 U / IKZ EM 04 U / IKZ EM 05 U / IKZ Date of edition: 01.02.2008 Stage of alteration: 2 Please keep this for future use! Contents:
More information15 Lead Angle D1~D9 MSRS15 MSE15 D2-D8 D9
15 1~9 15 MSE15 2~9 28 9 Heavy Milling Face Mill MonSteR M S R Square Mill Conventional Tools Metal removal rate is drastically increased Square (4edge) type Face Mill 15 Roughing takes place in one pass.
More informationMILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
More informationBSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
More informationMachining. Drilling Countersinking Tapping Turning Milling
Machining Drilling Countersinking Tapping Turning Milling hardox and weldox are registered trademarks.these steel grades are manufactured only by SSAB Oxelösund AB. hardox wear plate and weldox extra-high
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationM-FOUR (MEW) 90 Milling with Double-sided 4-edge Inserts. Low Cutting Forces with Chatter Resistance for Excellent Surface Finish
M-FOUR (MEW) 9 Milling with Double-sided 4-edge Low Cutting Forces with Chatter Resistance for Excellent urface Finish Economical 4-edge Insert MEWH Helical End Mill Added Improved Toolholder Durability
More informationFeatures. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
More informationWorkshop Practice TA 102 Lec 6 & 7 :Theory of Metal Cutting. By Prof.A.Chandrashekhar
Workshop Practice TA 102 Lec 6 & 7 :Theory of Metal Cutting By Prof.A.Chandrashekhar Theory of Metal cutting INTRODUCTION: The process of manufacturing a component by removing the unwanted material using
More informationInternal Grooving Application Added for ISCAR s Indexable Multifunction Tools
JANUARY Page 1 / 7 Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 2 / 7 Highlights ISCAR is introducing new tools which can carry the current multifunction XCMT-MF
More informationNEW. MILLLINE High Speed Milling Cutter. Exceptional productivity for aluminum and non-ferrous machining. Keeping the Customer First
Keeping the Customer First Tungaloy Report No. 429-US MILLLINE High Speed Milling Cutter NEW Exceptional productivity for aluminum and non-ferrous machining NEW CHIPBREAKER Outstanding productivity in
More informationOperating manual. TruTool N 500 (1A1) english
Operating manual TruTool N 500 (1A1) english Table of Contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Correct use...7 2.2 Technical
More informationWhy settle for 2 cutting edges when you can have 3 on one insert?
MillLine www.tungaloyamerica.com Tungaloy Report No. 421-US TUNG-TRI Why settle for 2 cutting edges when you can have 3 on one insert? ACCELERATED MACHINING 2 TUNG-TRI MillLine Tung-Tri s economical insert
More information