P4KE Series RoHS Pb e3
|
|
- Rosalind Lawrence
- 6 years ago
- Views:
Transcription
1 P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Agency Approvals AGENCY Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2 (Note 1, (Note 4 P PPM 4 W Steady State Power Dissipation on Infinite Heat Sink at T L =75ºC Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2 Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 3 Operating Junction and Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient P D 1.5 W I FSM 6 A V F 3.5/5. V T J, T STG -55 to 175 C R θjl 6 C/W R θja C/W Notes: 1. Non-repetitive current pulse, per Fig. 4 and derated above T J (initial =25 O C per Fig Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. V F < 3.5V for single die parts and V F < 5.V for stacked-die parts. 4. The P PPM of stacked-die parts is 6W and please contact littelfuse for the detail stacked-die parts. Functional Diagram AGENCY FILE NUMBER E W peak pulse capability at /μs waveform, repetition rate (duty cycles:.1% Glass passivated chip junction in DO-41 Package Fast response time: typically less than 1.ps from Volts to BV min Excellent clamping capability Typical failure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD21A per its table 4a and 4c IEC ESD 3kV(Air, 3kV (Contact ESD protection of data lines in accordance with IEC EFT protection of data lines in accordance with IEC Low incremental surge resistance Applications Typical I R less than 1μA when min>12v High temperature to reflow soldering guaranteed: 26 C/4sec /.375,(9.5mm lead length, 5 lbs., (2.3kg T J C x (1+αT x (T J - 25 (αt:temperature Coefficient, typical value is.1% Plastic package is flammability rated V- per Underwriters Laboratories Matte tin lead free plated Halogen free and RoHS compliant Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(sn (IPC/JEDEC J-STD- 69A.1 TVS devices are ideal for the protection of I/O interfaces, V CC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Additional Infomarion Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional
2 Electrical Characteristics (T A =25 C unless otherwise noted Part Number (Uni Part Number (Bi Reverse Stand off Voltage V R (Volts MIN Breakdown I T (V MAX Test Current I T (ma Maximum Clamping Voltage V I pp (V Maximum Peak Pulse Current I pp (A Maximum Reverse Leakage I V R (µa P4KE6.8A P4KE6.8CA X P4KE7.5A P4KE7.5CA X P4KE8.2A P4KE8.2CA X P4KE9.1A P4KE9.1CA X P4KEA P4KECA X P4KE11A P4KE11CA X P4KE12A P4KE12CA X P4KE13A P4KE13CA X P4KE15A P4KE15CA X P4KE16A P4KE16CA X P4KE18A P4KE18CA X P4KE2A P4KE2CA X P4KE22A P4KE22CA X P4KE24A P4KE24CA X P4KE27A P4KE27CA X P4KE3A P4KE3CA X P4KE33A P4KE33CA X P4KE36A P4KE36CA X P4KE39A P4KE39CA X P4KE43A P4KE43CA X P4KE47A P4KE47CA X P4KE51A P4KE51CA X P4KE56A P4KE56CA X P4KE62A P4KE62CA X P4KE68A P4KE68CA X P4KE75A P4KE75CA X P4KE82A P4KE82CA X P4KE91A P4KE91CA X P4KEA P4KECA X P4KE1A P4KE1CA X P4KE12A P4KE12CA X P4KE13A P4KE13CA X P4KE15A P4KE15CA X P4KE16A P4KE16CA X P4KE17A P4KE17CA X P4KE18A P4KE18CA X P4KE2A P4KE2CA X P4KE22A P4KE22CA P4KE25A P4KE25CA P4KE3A P4KE3CA P4KE35A P4KE35CA P4KE4A P4KE4CA P4KE44A P4KE44CA P4KE48A P4KE48CA P4KE5A P4KE5CA P4KE53A P4KE53CA P4KE54A P4KE54CA P4KE55A P4KE55CA For bidirectional type having V R of volts and less, the I R limit is double. For parts without A, the is ± % and V C is 5% higher than with A parts Agency Approval
3 I-V Curve Characteristics Uni-directional Bi-directional Ipp Vc VBR VR IR IT VF V Vc VBR VR IT IR IR IT VRVBR Vc V Ipp Ipp P PPM Peak Pulse Power Dissipation -- Max power dissipation V R Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I T V C Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current I R V F Reverse Leakage Current -- Current measured at V R Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T A =25 C unless otherwise noted Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS P PPM -Peak Pulse Power (kw 1 Single die,4w at xµs, 25 C TJ initial = Tamb stacked-die, 6W at xµs, 25 C t d -Pulse Width (ms Time continues on next page.
4 Ratings and Characteristic Curves (T A =25 C unless otherwise noted (Continued Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform Peak Pulse Power (P PP or Current (I PP Derating in Percentage % T J - Initial Junction Temperature (ºC I PPM - Peak Pulse Current, % I RSM 15 5 td tr=µsec Peak Value IPPM Half Value IPPM 2 IPPM ( TJ=25 C Pulse Width(td is defined as the point where the peak current decays to 5% of IPPM /µsec. Waveform as defined by R.E.A t-time (ms Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance Cj (pf Uni-direc onal V=V Uni/Bi-direc onal V=V R Bi-direc onal V=V Transient Thermal Impedance ( C/W Reverse Breakdown Voltage (V T P -Pulse Duration (s Figure 7 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 7 Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values. IFSM - Peak Forward Surve Current (A IF-Peak Forward Current (A. 1. Single die Stacked-die 1 Number of Cycles at 6 Hz VF-Peak Forward Voltage(V
5 Temperature (T Transient Voltage Suppression Diodes Soldering Parameters Reflow Condition Lead free assembly T P t p - Temperature Min (T s(min 15 C Ramp-up Critical Zone T L to T P Pre Heat - Temperature Max (T s(max 2 C T L t L - Time (min to max (t s 6 18 secs Average ramp up rate (Liquidus Temp (T A to peak 3 C/second max T s(max T s(min t s Preheat Ramp-down T S(max to T A - Ramp-up Rate Reflow - Temperature (T A (Liquidus 217 C 3 C/second max - Time (min to max (t s 6 15 seconds 25 C t 25 C to Peak Time (t Peak Temperature (T P 26 +/-5 C Time within 5 C of actual peak Temperature (t p 2 4 seconds Flow/Wave Soldering (Solder Dipping Ramp-down Rate 6 C/second max Peak Temperature : 26 O C Time 25 C to peak Temperature (T P 8 minutes Max. Dipping Time : 5 seconds Do not exceed 26 C Soldering : 1 time Physical Specifications Environmental Specifications Weight.12oz.,.3g High Temp. Storage JESD22-A3 Case JEDEC DO-24AL (DO-41 molded plastic body over passivated junction. HTRB JESD22-A8 Polarity Color band denotes the cathode except Bipolar. Temperature Cycling JESD22-A4 Terminal Matte Tin axial leads, solderable per JESD22-B2. H3TRB RSH JESD22-A1 JESD22-B6 Dimensions A D Cathode Band (for Uni-directional products only B A DO-24AL (DO-41 C Dimensions Inches Millimeters Min Max Min Max A B C D
6 Part Numbering System Part Marking System P4KE xxx XXX OPTION CODE: BLANK Reel Tape -B Bulk Packaging TYPE CODE: A Uni-Directional (5% Voltage Tolerance CA Bi-Directional (5% Voltage Tolerance VOLTAGE CODE (Refer to the Electrical Characteristics table SERIES CODE Cathode Band (for Uni-directional products only Littelfuse Logo F YYWW P4KEXXX Trace Code Marking YY:Year Code WW: Week Code Product Type Packaging Part Number Component Package Quantity Packaging Option Packaging Specification P4KExxxXX DO-24AL 5 Tape & Reel EIA STD RS-296 P4KExxxXX-B DO-24AL 5 BOX Littelfuse Spec. Tape and Reel Specification 2.56 (65. Off Center either side.28( /-.39 (53.+2./ /-.2 (5.+/ ( ( (6. Dimensions are in inches/mm 3. ( ( (17.27 Recess Depth Max..75 (19.5 Direction of Feed
3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationLCE Series. Transient Voltage Suppression Diodes. Axial Leaded 1500W > LCE series. Description. Uni-directional
Transient Suppression Diodes LCE Series RoHS Pb e3 Uni-directional Description The LCE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More information1KSMB Series. Transient Voltage Suppression Diodes. Surface Mount 1000W > 1KSMB series. Uni-directional. Description
Surface Mount W > KSMB series KSMB Series RoHS Pb e3 Uni-directional Description Bi-directional The KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationTPSMD Series. TVS Diodes Surface Mount 3000W > TPSMD series. Description
TPSMD Series RoHS Pb e3 Description Bi-directional The TPSMD series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTPSMC-VR Series. TVS Diodes Surface Mount 1500W > TPSMC-VR series Series. Description. Uni-directional. Bi-directional
TPSMC-VR Series Description RoHS Pb e3 The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationTransient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series
Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationSMBJ-HRA Series. Transient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HRA Series. Description. Uni-directional
SMBJ-HRA Series RoHS Pb e3 Uni-directional Bi-directional Description The SMBJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series
SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationTransient Voltage Suppressors. SMAJ Series. Circuit Protection System
Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible
More informationSurface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationZener Diode Surface Mount - 1W - SMF47xxA LF RoHS
SMF47xxA Description SMF47xxA Series Zener Diodes are excellent voltage stabilization devices. The Series is designed specifically for Voltage stabilization Voltage regulation, and so on. Zener Diode LF
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationTransient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR series. Bi-directional. Features V BR 3000 W 6.5 W 300 A 3.5 V.
RoHS Uni-directional Description Bi-directional The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationSMDJ-HR Series. Transient Voltage Suppression Diodes Surface Mount 3000W > SMDJ-HR Series. Description. Uni-directional
SMDJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMDJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSMCG-HRA Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HRA series
SMCG-HRA Series RoHS Pb e3 Description The SMCG-HRA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationS M A J x x x C A. Reverse Stand-Off Voltage
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More information20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationGLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationAutomotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series
Automotive Electrical Overvoltage Transient Suppressors Leaded - > ATH series Description Overvoltage transient suppressors are designed for applications requiring a low voltage rectifier with reverse
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationSM24CANA Series 200W TVS Diode Array
SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering diodes with one or two avalanche
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationAQxxC-01FTG Series. TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG SD-C Series Series. RoHS Pb GREEN.
General Purpose ESD Protection - AQxxC-1FTG SD-C Series Series AQxxC-1FTG Series RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSP4021 Series 2.5pF, 25A Discrete TVS Diode
SP40 Series.5pF, 5A Discrete TVS Diode RoHS Pb GREEN Description The SP40 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationSP4020 Series 2.5pF, 30A Discrete TVS Diode
SP400 Series.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP400 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationSMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional
SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationSP4208 series 3.0pF, 30A Discrete TVS Diode
SP4208 series 3.0pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The SP4208 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationSMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional
RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More information