M C C SMBJ11AHE3 THRU SMBJ78CAHE3. Features. Transient Voltage Suppressor 11 to 78 Volts 600 Watt
|
|
- Barrie Bradford
- 5 years ago
- Views:
Transcription
1 omponents 2736 Marilla Street Chatsworth!"# $%!"# SMBJAHE3 THU SMBJ78CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/ohs Compliant (Note) ("P"Suffix designates Compliant. See ordering information) Fast response time: typical less than.ps from volts to VB minimum AEC-Q Qualified Low inductance UL ecognized File # E48232 Halogen free HFKDQLFDO'DWD Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level Terminals:solderable per MIL-STD-7, Method 226 Polarity:Color band denotes positive end(cathode) except Bidirectional Maximum soldering temperature:26 o C for seconds Manufacturing code added for better tracking Maximum 2 o C Unless Otherwise Specified Peak Pulse Current on /us waveform I PP See Table Note: 2 Peak Pulse Power Dissipation P PP 6W Note: 2, 3 Operation And Storage T J, T STG Temperature ange - o C to +7 o C Thermal esistance thjc 2 o C/W thjl 2 o C/W Transient Voltage Suppressor to 78 Volts 6 Watt DO-24AA (SMB) (LEAD FAME) G F D E DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A B C D E F G H H A B C NOTES:. High Temperature Solder Exemptions Applied, see EU Directive Annex Non-repetitive current pulse, per Fig.3 and derated above T A =2 o C per Fig Mounted on.mm 2 copper pads to each terminal. 4. Peak pulse current waveform is /us, with maximum duty Cycle of.%.. Unidirectional and bidirectional available,for bidirectional devices add 'C' suffix to the pn#, i.e.smbj.cahe3 6. For bi-directional type having Vrwm of Volts and less, the I limit is double. SUGGESTED SOLDE PAD LAYOUT.6".82. evision: C of 26/8/
2 SMBJAHE3 THU SMBJ78CAHE3 PPPM, PEAK PULSE POWE, KW. MOUNTEDON.mm 2 COPPE LAND AEAS NON-EPETITIVE PULSE WAVEFOM SHOWNINFIGUE3 TA = 2.. us. us us us.ms ms td, PULSE WIDTH, SEC PEAK PULSE POWE(pppm) O CUENT (Ipp)DEATING IN PECENTAGE % T A, AMBIENT TEMPEATUE, Fig. -PEAK PULSE POWE ATING CUVE Fig. 2-PULSE DEATING CUVE Ippm, PEAK PULSE CUENT, % tf = usec Peak Value Ippm Half Value-Ipp 2 TA = 2 Pulse Width(td) is Defined as the Point Where the Peak Current Decays to % of lpp /usec Waveform as Defined by.e.a. e-kt td t, TIME, ms Fig. 3-PULSE WAVEFOM CJ, CAPACITANCE, pf 6, 4, 2,, TJ = 2 f=.mhz Vsig = mvp-p MEASUED AT VOLTAGE(VMW) MEASUED AT ZEO BIAS IFSM, PEAK FOWAD SUGE CUENT, AMPEES 2 TJ = TJ max 8.3ms SINGLE HALF SINCE-WAVE JEDEC METHOD NUMBE OF CYCLES AT 6Hz V(WM), EVESE VOLTAGE, VOLTS Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. - NON-EPETITIVE PEAK FOWAD SUGE CUENT evision: C 2 of 26/8/
3 SMBJAHE3 thru SMBJ78CAHE3 Electrical 2 o C Unless Otherwise Specified MCC PAT NUMBE EVESE VOLTAGE V WM BEAKDOWN VOLTAGE V T (VOLTS) CLAMPING VOLTAGE@I PP PEAK PULSE CUENT I PP EVESE WM I D VOLTS MIN MAX I T (ma) VOLTS (AMPS) (μa) MAKING CODE SMBJAHE KZ SMBJ2AHE LE SMBJ3AHE LG SMBJ4AHE LK SMBJAHE LM SMBJ6AHE LP SMBJ7AHE L SMBJ8AHE3 SMBJ2AHE LT LV SMBJ22AHE LX SMBJ24AHE3 SMBJ26AHE LZ ME SMBJ28AHE MG SMBJ3AHE MK SMBJ33AHE MM SMBJ36AHE MP SMBJAHE3 SMBJ43AHE M MT SMBJ4AHE MV SMBJ48AHE MX SMBJAHE MZ SMBJ4AHE NE SMBJ8AHE NG SMBJ6AHE NK SMBJ64AHE NM SMBJ7AHE NP SMBJ7AHE N SMBJ78AHE NT evision: C 3 of 26/8/
4 SMBJ.AHE3 thru SMBJ4CAHE3 Electrical 2 o C Unless Otherwise Specified MCC PAT NUMBE EVESE VOLTAGE V WM EVESE WM I D BEAKDOWN VOLTAGE V T (VOLTS) CLAMPING VOLTAGE@I PP PEAK PULSE CUENT I PP VOLTS MIN MAX I T (ma) VOLTS (AMPS) (μa) MAKING CODE SMBJCAHE AZ SMBJ2CAHE BE SMBJ3CAHE BG SMBJ4CAHE BK SMBJCAHE BM SMBJ6CAHE BP SMBJ7CAHE B SMBJ8CAHE3 SMBJ2CAHE BT BV SMBJ22CAHE BX SMBJ24CAHE3 SMBJ26CAHE BZ CE SMBJ28CAHE CG SMBJ3CAHE CK SMBJ33CAHE CM SMBJ36CAHE CP SMBJCAHE3 SMBJ43CAHE C CT SMBJ4CAHE CV SMBJ48CAHE CX SMBJCAHE CZ SMBJ4CAHE DE SMBJ8CAHE3 SMBJ6CAHE DG DK SMBJ64CAHE3 SMBJ7CAHE DM DP SMBJ7CAHE D SMBJ78CAHE DT evision: C 4 of 26/8/
5 Ordering Information : Device Part Number-TP Packing Tape&eel: 3Kpcs/eel ***IMPOTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPOT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOME AWAENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. evision: C of 26/8/
M C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features
More informationMicro Commercial Components Marilla Street, Chatsworth, CA91311 Tel: Fax: Process Change Notification.
M C C 076 Marilla Street, Chatsworth, CA9 Tel:88-70-49 ax:88-70-499 Process Change Notification Jan- st -0 Subject : MCC Process Change Notification#PCN_00 Title: MCC revise the pn# designation for MMBD50A~MMBD505A
More informationMCC. SS220-L THRU. Features. 2 Amp Schottky Rectifier 20 to 200 Volts DO-214AC (SMA) (LEAD FRAME) Maximum Ratings
Features Guard Ring Protection Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Low Forward High Current Capability Halogen free available upon request
More informationM C C 3EZ5.1D5 THRU 3EZ75D5. Features. 3 W Glass Passivated Junction Silicon Zener Diode Volts. Mechanical Data DO-15
Features Low Profile Package Glass Passivated Junction Excellent Clamping Capability Lead Free Finish/RoHS Compliant(Note C)("P" Suffix Designates Compliant. See Ordering Information) Halogen free available
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More informationomponents Marilla Street Chatsworth nadc Vdc ms
Features Symbol ating ating Unit V DS Drain -source Voltage 60 V V GS Gate -source Voltage ±20 V I D Drain Current 115 ma P D Total Power Dissipation 200 mw JA Thermal esistance Junction to Ambient 625
More information600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMB(DO-214AA) PACKAGE. SMBJ Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 440 V Peak Pulae Power: 600 W SMB (DO-214AA) Features Glass passivated chip 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage
More information5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified
More informationM C C. Revision: B 2016/10/10 MCQ4503 SOP-8. Features Halogen free available upon request by adding suffix "-HF"
omponents 736 Marilla Street Chatsworth!"# $%!"# MCQ43 Features Halogen free available upon request by adding suffix "-HF" Lead Free Finish/ohs Compliant ("P"Suffix designates ohs Compliant. See ordering
More informationM C C. Revision: A 2016/02/07 MCMNP517 DFN2020-6U
omponents 2736 Marilla Street Chatsworth!"# $%!"# MCMNP517 Features Halogen free available upon request by adding suffix "-HF" Super High Density Cell Design for Extremely Low DS(ON) Lead Free Finish/ohs
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series. SMBJ Series. SMBJ Series
Surface Mount 6W > SMBJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E28662/E2353 Maximum Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak
More informationMicro Commercial Components Marilla Street Chatsworth C/ W C/ W
Features Mechanical Data Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) except Standard packaging: 16mm tape per ( EIA 481). Weight: 0.007 ounce,
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationMCC. BC846AW/BW BC847AW/BW/CW BC848AW/BW/CW. Features. NPN General Purpose Transistors. Maximum Ratings SOT-323
Features Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Low current (max. 100mA) Low voltage (max. 65V) Epoxy meets UL 94 V-0 flammability rating Moisure
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More informationMicro Commercial Components MCP140N10Y N-Channel Enhancement Mode Field Effect Transistor TO-220 Symbol Parameter Rating Unit 1 2 3
omponents 2736 Marilla Street Chatsworth!"# $%!"# MCP4NY Features Trench Power MV MOSFET technology Low DS(ON) Halogen free available upon request by adding suffix "-HF" Low Gate Charge Optimized for fast-switching
More informationM C C. MCAC48N10Y. Features. N-Channel Power MOSFET DFN5060. C Unless Otherwise Specified. Micro Commercial Components
omponents 736 Marilla treet Chatsworth!"# $%!"# MCC48NY Features Trench Power MV MOFET technology Very low on-resistance (ON) Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ series
Surface Mount 6W > SMBJ series RoHS Pb Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationM C C. MCAC80N06Y. Features. N-Channel Power MOSFET DFN5060. Maximum 25 O. C Unless Otherwise Specified
Features omponents 20736 Marilla treet Chatsworth!"# $%!"# Trench Power MV MOFET technology Very low on-resistance (ON) Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationomponents Marilla Street Chatsworth Watts
omponents 2736 Marilla Street Chatsworth!"# $%!"# 5.SMLJA THRU 5.SMLJ4A Features Halogen free available upon request by adding suffix "-HF" For surface mount application in order to optimize board space
More informationPeak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 600 Watts
TRANSIENT VOLTAGE SUPPRESSORS TM DESCRIPTION The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationMCC BC558A/B/C. Features. PNP Silicon Amplifier Transistor 625mW
omponents 2736 Marilla Street Chatsworth!"# $%!"# BC556A/B/C BC557A/B/C A/B/C Features Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) 15 o C Junction Temperature
More informationTransient Voltage Suppressors. SMBJ Series. Circuit Protection System
Transient Suppressors SMBJ Series Features UNI Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Optimized for LAN protection applications Matte tin lead free Plated
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationTransient Voltage Suppressors Diodes
Transient Voltage Suppressors Diodes Surface Mount - 6W > SMBJ5.~44CA Series The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationM C C. SI2301A. Features. P-Channel Enhancement Mode Field Effect Transistor SOT-23. Internal Block Diagram
omponents 736 Marilla treet Chatsworth!"# $%!"# I31A Features Halogen free available upon request by adding suffix "-HF" -,-.A, (ON) =1mΩ@ G =-.5 (ON) =15mΩ@ G =-.5 High dee cell design for extremely low
More informationMCC. MMDT3904V
Features Halogen free available upon request by adding suffix "-HF" Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Epitaxial Die Construction Ideal for
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationM C C. SI2302A. Features. N-Channel Enhancement Mode Field Effect Transistor SOT-23. Internal Block Diagram
omponents 73 Marilla treet Chatsworth!"# $%!"# I3A Features Halogen free available upon request by adding suffix "-HF",3.A, (ON) =55m @ G =.5 (ON) =8m @ G =.5 High dee cell design for extremely low (ON)
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Transient Suppressors Features Glass passivated junction. 600W Peak Pulse
More informationSMBJ Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationMCC. 2N5401 )HDWXUHV. PNP Silicon Amplifier Transistor 625mW 0HFKDQLFDO'DWD TO-92
omponents 20736 Marilla Street Chatsworth!"# $%!"# 2N5401 )HDWXUHV Through Hole Package 1 o C Junction Temperature Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information)
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationSMBJ. Transient Voltage Suppression Diodes. Surface Mount 600W > SMBJ series. Description. Uni-directional
SMBJ RoHS Pb e3 Uni-directional Description Bi-directional The SMBJ is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationMicro Commercial Components Marilla Street Chatsworth. Watts
20736 Marilla Street Chatsworth!"# $%!"# SMCJ5.0(C)A THRU SMCJ440(C)A Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For surface mount application
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD-123 Flat Lead Package
Zener Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More information200W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR. SMF Series WILLAS ELECTRONIC CORP.
Working : 5.0 to 190 V Peak Pulse Power: 200 W Features Glass passivated chip 200 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information1SMB5.0AT3 Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
1SMBAT3 Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationM C C. MT110C08T1 MT110C12T1 MT110C16T1 MT110C18T Amp THYRISTOR MODULE. Features. 800~1800 Volts. Applications.
Features pplications omponents 2736 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/RoHS Compliant (NOTE 1)("P" Suffix designates RoHS Compliant. See ordering information) International standard package
More informationSMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE
WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional
More informationM C C. MT200C08T2 MT200C12T2 MT200C16T2 MT200C18T Amp THYRISTOR MODULE. Features. 800~1800 Volts. Applications.
Features pplications omponents 2736 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/RoHS Compliant (NOTE 1)("P" Suffix designates RoHS Compliant. See ordering information) International standard package
More informationSurface Mount Transient Voltage Suppressor Stand-Off Voltage to 180 Volts 200 Watt Peak Pulse Power
Features Surface Mount Transient Suppressor Stand-Off - 5.0 to 80 olts 0 Watt Peak Pulse Power For surface mounted applications in order to optimize board space Low profile package Built-in strain relief
More informationSZ1SMB Series. TVS Diodes. Surface Mount > 600W > SZ1SMB Series. Description
SZ1SMB Series Pb Description The SZ1SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More information400W, 10V - 100V Surface Mount Transient Voltage Suppressor
400W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q101 qualified Low profile package Photo Glass passivated junction Excellent clamping capability Moisture sensitivity level: level
More informationSMF5.0AT1 Series. Zener Transient Voltage Suppressor SOD 123 Flat Lead Package
Zener Transient Voltage Suppressor SOD 123 Flat Lead Package The SMF5.A Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability,
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationSymbol Description Value Unit Conditions. Minimum 600
600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:
More informationM C C. MT200CB18T2 MT200CB16T Amp THYRISTOR/DIODE. Features. MODULE 800~1800 Volts. Applications. Circuit
Features pplications omponents 2736 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/RoHS Compliant (NOTE 1)("P" Suffix designates RoHS Compliant. See ordering information) International standard package
More informationASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF
SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More informationSMF5.0AT1G Series, SZSMF5.0AT1G Series. 200 W Transient Voltage Suppressor SOD-123 Flat Lead Package
SMF5.AT1G Series, SZSMF5.AT1G Series 2 W Transient Voltage Suppressor SOD-123 Flat Lead Package The SMF5.AT1G Series is designed to protect voltage sensitive components from high voltage, high energy transients.
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More informationV GS =0V,I D =10µA V DS = 20V, V GS =0V V GS = -8V, V DS =0V. V GS =V DS,I D =50µA V GS = 4.5V, I D = 3.6A V GS = 2.5V, I D = 3.1A V DS =5V,I D = 3.
Features Halogen free available upon request by adding suffix "-HF",3.A, R (ON) =55m @ G =.5 R (ON) =8m @ G =.5 High dee cell design for extremely low R (ON) Rugged and reliable Lead free product is acquired
More informationSurface Mount Silicon Zener Diodes
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance CREAT BY ART - Moisture sensitivity level: level, per J-STD-2 - Compliant
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More informationSMBJ5V0(C)A - SMBJ170(C)A 600 Watt Transient Voltage Suppressors
SMBJ5V0(C)A - SMBJ170(C)A 600 Watt Transient Suppressors Features Glass-Passivated Junction 600 W Peak Pulse Power Capability on 10/0 μs Waveform. Excellent Clamping Capability Low-Incremental Surge Resistance
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More information