DEVICES FOR BIPOLAR APPLICATIONS
|
|
- Brook Moore
- 5 years ago
- Views:
Transcription
1 SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass passivated chip construction * 15 watt surage capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time 1.5KE (25.4) MIN..42 (7).38 (.96) DIA..375 (9.5).285 (7.2) Ratings at 25 o C ambient temperature unless otherwise specified..2 (5.3).19 (4.8) DIA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. (25.4) MIN. Single phase, half wave, 6 Hz, resistive or inductive load, For capacitive load, derate current by %. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types 1.5KE 6.8 thru 1.5KE 45 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 o C unless otherwise noted) RATINGS SYMBOL VALUE UNITS Peak Power Dissipation at TA = 25 o C, TP = 1mS ( Note 1 ) PPPM Minimum 15 Watts Steady State Power Dissipation at TL = 75 o C lead lengths,.375 ( 9.5 mm ) ( Note 2 ) PM(AV) 5. Watts Peak Forward Surge Current, 8.3ms single half sine wavesuperimposed on rated load( JEDEC METHOD ) unidirectional only IFSM Amps Instantaneous Forward Current at 5.A for unidirectional only ( Note 3 ) V F 3.5/5. Volts Operating and Storage Temperature Range TJ, TSTG -55 to + 15 C NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 o C per Fig Mounted on copper pad area of.8x.8 ( Xmm ) per Fig VF = 3.5V for devices of V(BR) < V and VF = 5. Volts max.for devices of V(BR) > V. 2-12
2 RATING AND CHARACTERISTIC CURVES ( 1.5KE6.8 THRU 1.5KE45CA ) PPPM, PEAK PULSE POWER, KW FIG. 1 - PULSE POWER RATING CURVE Non-Repetitive Pulse Shown in Fig.3 TA = 25 us us us us ms ms TP, PULSE WIDTH, sec PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% FIG. 2 - PULSE DERATING CURVE TA, AMBIENT TEMPERATURE,( ), PEAK PULSE CURRENT,% 15 5 FIG. 3 - PULSE WAVEFORM tr = usec. Peak Value Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 5% of HALF VALUE - 2 /usec. as Defined by R.E.A t, TIME,mS CJ, CAPACITANCE, pf FIG. 4 - TYPICAL JUNCTION CAPACITANCE f = 1MH Vsig = 5mVp-p TJ = 25 Unidirectional----- Bidirectional VR = VR = RATED STAND-OFF VOLTAGE 5 5 V(BR), BREAKDOWN VOLTACE, VOLTS PM(AV), STEADY STATE POWER DISSIATION, WATTS FIG. 5 - STEADY STATE POWER DERATING CURVE L =.375"(9.5mm) Lead Lengths.8X.8X.4" (XX1mm) Copper Heat Sinks 6Hz Resistive or Inductive Load TL, LEAD TEMPERATURE ( ) AMPERES PEAK FORWARD SURGE CURRENT 4 FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL 8.3ms Single Half Sine-Wave (JEDED Method) TJ = TJ max. 1 NUMBER OF CYCLES AT 6 Hz
3 RATING AND CHARACTERISTIC CURVES ( 1.5KE6.8 THRU 1.5KE45CA ) X Impulse 1.5KE 1.5KE13 1.5KE 1.5KE75 1.5KE39 1.5KE33 1.5KE KE KE18 1.5KE X Impulse 1.5KE 1.5KE13 1.5KE75 1.5KE39 1.5KE33 1.5KE KE FORWARD CURRENT 2..2 FIG. 9 - INCREMENTAL CLAMPING VOLTAGE 8X Impulse 1.5KEC 1.5KE75C 1.5KE39C 1.5KE3C 1.5KE15C 1.5KE11C 1.5KE7.5C FIG. 11 -INSTANTANEOUS FORWARD VOLTAGE CHARACTERISTICS CURVE Pulse Width = 3uS 1% Duty Cycle TJ = INSTANTANEOUS FORWARD CURRENT, AMPERES KV-TEMPERATURE COEFFICIENT-mV/ 2..2 X Impulse 1.5KEC 1.5KE75C 1.5KE39C 1.5KE3C 1.5KE15C 1.5KE11C 1.5KE7.5C FIG BREAKDOWN VOLTAGE TEMPEATURE COEFFICIENT CURVE Unidirectional Bidirectional V(BR), BREAKDOWN VOLTAGE, VOLTS
4 TRANSIENT VOLTAGE SUPPRESSORS 15W SERIES TVS DIODES / 1.5KE ( CASE ) 15W TYPE Breakdown VBR MIN. MAX. (ma) Stand off VWM (Volts) Leakage at VWM ID(uA) Peak Pulse Current (Amps) Clamping at VC (Volts) 1.5KE KE6.8A KE KE7.5A KE KE8.2A KE KE9.1A KE KEA KE KE11A KE KE12A KE KE13A KE KE15A KE KE16A KE KE18A KE KEA KE KE22A KE KE24A KE KE27A KE KE3A KE KE33A KE KE36A KE KE39A KE KE43A KE KE47A KE KE51A KE KE56A
5 TRANSIENT VOLTAGE SUPPRESSORS 15W SERIES TVS DIODES / 1.5KE ( CASE ) 15W TYPE Breakdown VBR MIN. MAX. (ma) Stand off VWM (Volts) Leakage at VWM ID(uA) Peak Pulse Current (Amps) Clamping at VC (Volts) 1.5KE KE62A KE KE68A KE KE75A KE KE82A KE KE91A KE KEA KE KE1A KE KE1A KE KE13A KE KE15A KE KE16A KE KE17A KE KE18A KE KEA KE KE2A KE KE25A KE KE3A KE KE35A KE KE4A KE KE44A KE KE45A Notes : 1. V BR measured after I T applied for 3ms. I T = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. 1.5KE6.8C, 1.5KE45CA) electrical characteristics apply in both directions. 3. For bidirectional types having V WM of volts and less, the I D Iimit is doubled. 4. All devices UL listed file# E
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction
TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationSales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationSMCJ5.0CA Thru SMCJ170CA
Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More information5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
More informationSymbol Description Value Unit Conditions. Minimum 600
600W Surface Mount Transient Voltage Suppressor Features SMB Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time:
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More informationP6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationSMF4L Series. TVS Diodes Surface Mount 400W > SMF4L Series. Description. Uni-directional
SMF4L Series RoHS Pb e3 Uni-directional Description The SMF4L series of SOD-123FL small and flat lead lowprofile plastic package is designed specifically to protect sensitive electronic equipment from
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information1N6267A Series Watt Zener Transient Voltage Suppressors. Unidirectional*
500 Watt Zener Transient Voltage Suppressors Unidirectional* These devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability,
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationTransient Voltage Suppression Diodes Surface Mount 600W > TPSMA6L Series 3 W 60 A 3.5V V. -65 to 150 C 35 C/W 200 C/W. Anode
Surface Mount 6W > RoHS Description Uni-directional The is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events,
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information20KW Transient Voltage Suppressor 20KPA20A 20KPA300CA. 20KW Transient Voltage Suppressor. Features. Mechanical Data
Features Glass passivated junction 20KW peak pulse power capability at 10/1000μs waveform repetition rate (duty cycles): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR min. Excellent
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationRev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
More informationSMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series
SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More information1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description
1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF
SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty
More information1N6267A Series. TVS Diodes Watt Zener Transient Voltage Suppressors. Cathode. Anode. Description
1N6267A Series Pb Description These devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More information1.5KE SERIES 1500 WATT TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More informationSurface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems.
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationSurface Mount > 600W > P6SMB11AT3G Series. Description. Features
P6SMB11AT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY P6SMB Series Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage,
More information5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
More informationLCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.
Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationSMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional
SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More information5.0SMDJxxS Series, Single Chip Design
5.SMDJxxS Series, Single Chip Design RoHS Pb e3 Description The 5.SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by
More information1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationUnidirectional* PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS VOLTS 400 WATTS PEAK POWER
Unidirectional* The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationSLD8S Series RoHS Pb e3
SLD8S Series RoHS Pb e3 Description The SLD8S Series TVS Diode is housed in a SMTO-263 package with lead modifications. It is designed to protect sensitive electronics against lightning and inductive load
More information1N6267A Series Watt Mosorb Zener Transient Voltage Suppressors. Unidirectional
5 Watt Mosorb Zener Transient Voltage Suppressors Unidirectional Mosorb devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
More information5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors
Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips
More informationTECHNICAL SPECIFICATIONS OF SILICON RECTIFIER
TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER VOLTAGE RANGE 5 to 1 CURRENT 1. Ampere FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO 41 MECHANICAL DATA * Case:
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Compatible
More informationVoidless-Hermetically-Sealed Unidirectional 150 W Low-Capacitance Transient Voltage Suppressors
N89 N882 Available Voidless-Hermetically-Sealed Unidirectional 50 W Low-Capacitance Transient Suppressors DESCRIPTION This series of voidless-hermetically-sealed unidirectional low-capacitance Transient
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationChina - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationBZW04 Series. Features: DO-41. Mechanical Data. Page <1> 14/05/08 V1.1
DO-41 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low impedancesurge resistance.
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More information1N6373-1N6381 Series (ICTE-5 - ICTE-36) 1500 Watt Peak Power Mosorb Zener Transient Voltage Suppressors. Unidirectional*
N6373 - N638 Series (ICTE-5 - ICTE-36) 5 Watt Peak Power Mosorb Zener Transient Voltage Suppressors Unidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage,
More informationTransient Voltage Suppression Diodes Surface Mount 600W > SMBJ-HR series. Bi-directional. Features 5.0 W 100 A 3.5V/5.0 V. -55 to 150 C 20 C/W
SMBJ-HR Series RoHS Uni-directional Description TVS Diode Arrays (SPA Family of Products Bi-directional The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment
More informationSMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.
Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent
More informationt p = 10 ms T j initial = T amb
TRANSIL FEATURES Peak pulse power: 6 W (1/ µs ) Stand-off voltage range 6.8 to 44V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil diodes
More informationSurface Mount Transient Voltage Suppressor Stand-Off Voltage to 180 Volts 200 Watt Peak Pulse Power
Features Surface Mount Transient Suppressor Stand-Off - 5.0 to 80 olts 0 Watt Peak Pulse Power For surface mounted applications in order to optimize board space Low profile package Built-in strain relief
More informationVOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere VRRM VRMS VDC IFSM I 2 T. (Note 2) R JL (Note 3) R JA TJ, TSTG SYMBOL
SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY SILICON RECTIFIER VOLTAGE RANGE 5 to 1 Volts CURRENT 1. Ampere FFM11 THRU FFM17 FEATURES * Glass passivated device * Ideal for surface mounted applications
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationP6SMB6.8AT3G Series, SZP6SMB6.8AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
P66.8AT3G Series, SZP66.8AT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationG H I All Dimensions in millimeter Portable electronics Cellular handsets and accessories.
LITE-ON SEMICONDUCTOR BIDIRECTIONAL ESD PROTECTION DIODES STAND-OFF VOLTAGE - 12. Volts POWER DISSIPATION - 35 WATTS GENERAL DESCRIPTION Electro Static Discharge ( ESD ) protection diodes in ultra small
More informationTV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
More information