INTELLITOUCH / SECURE TOUCH MODELS ONLY
|
|
- Gervais Lyons
- 5 years ago
- Views:
Transcription
1 NOTE: ALL DIMS. +/- 1mm UNLESS NOTED INTELLITOUCH / SECURE TOUCH MODELS ONLY (Max. 44.6mm) (ACTIVE AREA) (ACTIVE AREA) V DC POWER INPUT VGA VIDEO INPUT USB TOUCH SCREEN OUTPUT RJ-45 OSD CONNECTOR DVI-D VIDEO INPUT OPTIONAL OSD REMOTE P/N E (ORDERED SEPARATELY) SHEET 1 OF 9
2 INTELLITOUCH / SECURE TOUCH MODELS ONLY MAX. SCREW DEPTH 7mm FROM MOUNTING SURFACE. X VESA MOUNT SIDE MOUNT, VERTICAL (LEFT & RIGHT) MAX. SCREW DEPTH 8mm, X SIDE MOUNT, HORIZONTAL (TOP & BOTTOM) SHEET 2 OF 9
3 INTELLITOUCH / SECURE TOUCH MODELS ONLY MOUNTING WITH ADJUSTABLE BRACKETS (4 PROVIDED) R1.8 X X THRU HOLES, X X THRU HOLES, X2 RECOMMENDED CUSTOMER PANEL CUT-OUT MOUNTING BRACKET ADJUSTMENT RANGE -1 TO (X4 PLACES) SHEET 3 OF 9
4 INTELLITOUCH / SECURE TOUCH MODELS ONLY (Max.49 mm) OPTIONAL FRONT MOUNT BEZEL KIT P/N E (ORDERED SEPARATELY, CUSTOMER ASSEMBLED) FRONT MOUNT BEZEL R 8, X R5, X4 FRONT MOUNT ASSEMBLY FRONT MOUNT BRACKETS X4 (INCLUDED WITH FRONT MOUNT KIT) 224X SERIES MONITOR BRACKETS ACCOMODATE MAX PANEL THICKNESS OF 14MM 170 CUSTOMER PANEL 170 RECOMMENDED CUSTOMER PANEL CUT-OUT MOUNTING HOLES, X8 1. IF CUSTOMER PANEL IS WOOD, 4.5MM THRU HOLES FOR M4 SCREWS OR NO THRU HOLES, SCREWS FOR WOOD 4MM 2. If CUSTOMER PANEL IS SHEET METAL, CONCEALED HEAD THREADED STUDS M4 WITH NUTS SHEET 4 OF 9
5 INTELLITOUCH MODELS ONLY OPTIONAL RACK MOUNT KIT P/N E ORDERED SEPARATELY, CUSTOMER ASSEMBLED) (19") (18.3") 37.3 (1.47") (21.0") M4 SCREW NOTE: 1. MONITOR IS ORIENTED IN PORTRAIT MODE 2. REQUIRES 12U OF RACK SPACE 3. MOUNTING HOLES SPACING PER EIA-310-D 1. INSTALL BOTTOM BRACKET FIRST USING 2xM4 SCREWS (INCLUDED) 2. INSTALL SIDE BRACKETS USING M4 AND M6 SCREWS (INCLUDED) M6 SCREW SHEET 5 OF 9
6 PROJECTED CAPACITIVE MODELS ONLY 516 (EDGE OF GLASS) 38.5 (Max. 40.5mm) MAX. SCREW DEPTH 7mm FROM MOUNTING SURFACE. X (ACTIVE AREA) 2.3 (FOAM SEAL ALL AROUND) (ACTIVE AREA) 311 (EDGE OF GLASS) 204 M4 THREADS, X VESA MOUNT M4 THREADS, X SHEET 6 OF 9
7 TITLE: 2243L / 2244L PROJECTED CAPACITIVE MODELS ONLY 45 ADJUSTMENT RANGE = MM RECOMMENDED CUSTOMER PANEL CUT-OUT R9.5# # # CLEARANCE HOLE FOR M4 SCREW, x8 M4 THREADED HOLE, x8 MOUNTING HOLE,x8 IF CUSTOMER PANEL IS METAL, BLIND HOLE, M4 THREAD BRACKET "C" CLEARANCE HOLE FOR M4 THREADS ON BRACKET, X8 INSTALLATION NOTES: 1. ATTACH BRACKET "A" TO TOUCHMONITOR WITH M4 LOW PROFILE SCREWS (INCLUDED) 2. ATTACH BRACKET "C" TO CUSTOMER PANEL PER DRAWING 3. ATTACH BRACKET "B" TO BRACKET "C" WITH M4 HEX HEAD SCREWS (INCLUDED) 4. ADJUST DEPTH OF BRACKET "B" SO MONITOR IS FLUSH WITH CUSTOMER PANEL. 5. PLACE TOUCHMONITOR INTO CUSTOMER PANEL OPENING TAKING CARE NOT TO DAMAGE FOAM SEAL 6. SECURE TOUCHMONITOR TO BRACKET "B" FROM BEHIND WITH M4 HEX HEAD SCREWS (INCLUDED) FOAM SEAL BRACKET "B" (ADJUSTABLE) TOUCHMONITOR FOAM SEAL BRACKET "A" TOUCHSCREEN SURFACE CAUTION: WHEN ASSEMBLED, TOUCHSCREEN SURFACE MUST NOT PROTRUDE BEYOND CUSTOMER PANEL SURFACE ANYWHERE AROUND BORDER OF SCREEN CUSTOMER PANEL CUSTOMER PANEL SECTION 1-1 SCALE SHEET 7 OF 9
8 TITLE: TITLE: 2243L / 2244L itouch / NO TOUCH(ZB) MODELS ONLY (EDGE OF GLASS) (EDGE OF GLASS) 317.3#0.4mm (CUT-OUT DIMS. FOR CUSTOMER PANEL) #0.4mm (CUT-OUT DIMS. FOR CUSTOMER PANEL) R9.8#0.3mm (CUT-OUT DIMS. FOR CUSTOMER PANEL)9.8 MAX. SCREW DEPTH 6mm FROM MOUNTING SURFACE. X8 MAX. SCREW DEPTH 7mm FROM MOUNTING SURFACE. X (MAX. 42.4mm) 20.8 RJ-45 OSD CONNECTOR DVI TOUCH USB 12V DC POWER IN VGA SHEET 8 OF 9
9 C-1 B TITLE: TITLE: 2243L / 2244L itouch / NO TOUCH(ZB) MODELS ONLY B-1 A C INSTALLATION NOTES: 1. ATTACH BRACKET "A" TO CUSTOMER PANEL "C" PER DRAWING 2. ATTACH BRACKET "B" TO BRACKET "A" WITH M4 HEX HEAD SCREWS "B-1" (INCLUDED) 3. PLACE TOUCH MONITOR INTO CUSTOMER PANEL OPENING TAKING CARE NOT TO DAMAGE FOAM SEAL 4. ADJUST DEPTH OF BRACKETS "B" SO MONITOR IS SLIGHTLY PROUD OF CUSTOMER PANEL (~1mm) 5. SECURE TOUCHMONITOR TO BRACKET "B" + "A" FROM BEHIND WITH M4 HEX HEAD SCREWS "C-1" (INCLUDED) C-1 X8 C SECTION V-V SCALE B X4 A X4 TOUCH SCREEN FOAM SEAL B-1 X8 CUSTOMER PANEL CUT-OUT C 5 C CUSTOMER PANEL: MIN THICKNESS = 3mm MAX THICKNESS = 8.5mm V V MOUNTING HOLES, X8 IF CUSTOMER PANEL IS METAL, BLIND HOLE, M4 THREADS SHEET 9 OF 9
FRONT SIDE REAR BOTTOM INTELLITOUCH ONLY OPTIONAL OSD REMOTE P/N E (1 INCLUDED WITH TOUCHMONITOR) DIMENSIONAL DRAWING, 3243L SHEET 1 OF
INTELLITOUCH ONLY 25.1 736.4 58 ACTIVE AREA = 392.9 BEZEL OPENING =394.85 443 ACTIVE AREA = 698.4 BEZEL OPENING =700.4 19 FRONT SIDE REAR SEE A BOTTOM AC POWER IN USB TOUCHSCREEN OUTPUT OSD VGA INPUT HDMI
More information4Post and 2Post Universal Shelf System for 19 Racks
Patent(s) Pending 4Post and 2Post Universal Shelf System for 19 Racks Installation Instructions Kit P/N: 108-4013 108-4261 Kit Contents (1) Shelf (2) Rear Brackets Front Hardware Kit (4) 8-32 x.375 Flat
More informationDesk/Wall-Mount Rack
Desk/Wall-Mount Rack Patent(s) Pending Installation Instructions Post P/N: 119-1752 119-1781 119-1782 119-4014 Frame P/N: 119-1591 119-1754 119-1755 Kit Contents (2) Frames (4) Posts Assembly Hardware
More information4Post and 2Post Universal Shelf System
Patent(s) Pending 4Post and 2Post Universal Shelf System Installation Instructions Kit P/N: 108-4013 108-4261 Kit Contents Kit Contents: (1) Shelf (2) Rear Brackets Front Hardware Kit (4) 8-32 x.375 Flat
More informationOn-Roof Mounting Sets for Flat-Plate Collectors
Engineering Submittal Sheet Installation sets for collectors Fig. 1 Installation set for 2 collectors 1 basic installation set, 1 extension installation set Basic installation set for each collector array
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationIBM xseries 345 Third Party Slide Rail Kit
RackSolutions.com Patent(s) Pending IBM xseries 345 Third Party Slide Rail Kit Installation Instructions Kit P/N: 2URAIL-IBM-345 info@racksolutions.com Technical Support & Sales 903.453.0801 Kit Contents
More informationOffice Partitions WARNING. Assembly Instructions. Customer Service A S S E M B LY HARDWARE H1 H2 H3 H4 H5 H8 H9 H10 H11 H12
Customer Service 1-800-645-2986 Assembly Instructions WARNING In order to prevent structural failure, instability, t i p - o v e r, and/or serious injury, please follow i n s t ructions care f u l l y.
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationCAPTUR COMPONENTS. We make food look better.
CAPTUR COMPONENTS TOP EDGE GLASS CONNECTORS GCA6 6mm (1/4") Glass GCA10 10mm (3/8") Glass 2.76 2.90 2.76 2.90 TOP BOTTOM 1.13 1.13 6mm GLASS GC906 6mm (1/4") Glass 10mm GLASS GC9010 10mm (3/8") Glass Adjustable
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More informationMenu Board Tilt or Fixed Mount Installation Instructions MDS1T-200, MDS1T-300, MDS1T-400 MDS2T-200, MDS2T-300, MDS2T-400 MDS3T-200, MDS3T-300, MDS3T-400 MDS4T-200, MDS4T-300, MDS4T-400 MDS5T-200, MDS5T-300,
More informationVideo Wall Installation Instructions 2W X 3H, 3W X 3H
Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...
More information6 Foot/ 1800mm Aisle Width Net-Contain Aisle Containment for N-Type and S-Type Cabinets
6 Foot/ 1800mm Aisle Width Net-Contain Aisle Containment for N-Type and S-Type Cabinets Panduit Corp. 2016 INSTALLATION INSTRUCTIONS Page 1 of 36 Component Guide for Doors Dual Sliding Containment Door
More informationFlush Mount Bezel Kit
#15 13511 Crestwood Place Richmond BC Canada V6V 2G1 Tel: 604-207-1600 Fax: 604-207-8008 www.comnavmarine.com Flush Mount Bezel Kit for Admiral P3, Commander P2/P2VS and Navigator G2 Heads Installation
More informationMM700R Recess Box Kit Addendum
TM MM700R Recess Box Kit Addendum IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify additional requirement
More informationED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
More information33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
More information4Post and 2Post Rails for Dell PowerEdge R810
4Post and 2Post Rails for Dell PowerEdge R810 Patent(s) Pending 4Post Page 2 2Post Center Page 4 2Post Flush Page 6 Installation Instructions Kit P/N: 109-1737 109-1841 Kit Contents Kit Contents: (1) Right
More informationGiraud Tool Company, Inc.
Motor Upgrade for Gracey Trimmer This package is intended to allow the user to upgrade their Gracey trimmer with a higher rpm motor and convenience features not found in the production offering. This upgrade
More informationInstallation Instructions
Installation Instructions Alpha SolarSmart On Roof Kits for the Installation of Alpha Solar Collectors onto Tile and Slate Type Roofs For Technical help or for Service call... ALPHA HELPLINE Tel: 0 77
More informationS6 User s Manual USER S MANUAL ver. 1.0
S6 User s Manual SKEETER - 1U LOW PROFILE SOLUTION Table of Contents Tabletop Configuration 2 Tabletop Configuration Accessories 4 Slide Configuration 5 slide configuration accessories 7 rack Mount configuration
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationElo Touch Solutions Wallmounting Kit for the 7001L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wallmounting Kit for the 7001L IDS Touchmonitors SW602083 Rev E Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationCopyright Black Box Corporation. All rights reserved.
Copyright 2008. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 4-Post Steel Open Rack AUGUST 2008 RM7000A RM7001A RM7002 RM7003A RM7004A
More informationWINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS
WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com See garage door owner s manual for
More informationSliding Door Hardware Installation Instructions ROB ROY
Sliding Door Hardware Installation Instructions ROB ROY Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview All Krown Lab
More informationMTS-SP100. RENOGY Pole Mount System E Philadelphia St, Ontario, CA Version: 1.2
MTS-SP100 RENOGY Pole Mount System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.2 Important Safety Instructions Please save these instructions. This manual contains important safety,
More informationPet Door Panel Installation Manual
Pet Door Panel Installation Manual 400-558-1 1 4/3/03, 3:26 PM Components: Pet Door Panel Panel Latch Assembly Foam Weather-stripping Glass Sweep (4) Binding Posts (6) #6 x 1/2 Sheet Metal Screws (4) 8-32
More informationinstallation instructions For Slider Casement Air Conditioners
installation instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationPARTITION INSTALLATION INSTRUCTIONS
PARTITION INSTALLATION INSTRUCTIONS 2015 Chevrolet Tahoe PPV / Part Number 5703FW, FWA & FEW Do not attempt to install this product on any vehicle equipped with third row seating! Parts List Distributed
More informationHORIZONTAL AND VERTICAL - 43 to 54
Instructions for Décor TV Mounting Bracket Wall mount your speakers securely enough that they cannot fall and cause personal injury or damage to property. NON LIABILITY: We are aware that the mounting
More information96 (Standard Length)
Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation
More informationSurface Mount Bezel Kit
#15 13511 Crestwood Place Richmond BC Canada V6V 2G1 Tel: 604-207-1600 Fax: 604-207-8008 www.comnavmarine.com Surface Mount Bezel Kit for Admiral P3, Commander P2/P2VS and Navigator G2 Heads Installation
More informationINSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500
INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500 Specifications: Designed for in-wall installation spanning a minimum of 3 wood studs, 16" on center. Accomodates MWR, PWR and
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More informationUniversal flat-panel mount
I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate
More informationECLIPSE: TV COVER INSTALLATION GUIDE
ECLIPSE: TV COVER INSTALLATION GUIDE 1 Congratulations on purchasing your Eclipse Vanishing TV Mirror! Installing your TV into the Eclipse Mirror is a very simple process following these instructions.
More information6000 Horizontal Router Table Owners Manual Please Read Carefully!
6 Horizontal Router Table Owners Manual Please Read Carefully! Parts List Please identify and verify that you have all of the hardware & parts shown prior to assembly. The parts described in this box are
More informationEPPA2-KIT DUAL MONITOR ARM CONVERSION
EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationShim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS
Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)
More informationP /8 Ring Diameter 90. Trim Ring Mounting Holes P /8. 393/16 Ring Diameter. Stud Minimum
PARTS LIST VARIABLE Top Over Head Support Bracket 1 872070 P4000-SMR Over Head Joiner Bracket 1 VARIABLE Bottom Over Head Bracket 1 79741 P4000-SMR 4 Angled Leg 4 100-00230-14 1/4-20 x 31/2 RD. HD. MS.
More informationAWNING SYSTEM INSTALLATION INSTRUCTIONS ALL VERTICAL WALLS
INSTALLATION MANUAL AWNING SYSTEM INSTALLATION INSTRUCTIONS ALL VERTICAL WALLS TABLE OF CONTENTS Table of Contents... 3 Components... 4 System Components... 6 Attachment Components... 7 Module Compatibility...
More informationSENC 150. Longitudinal Installation... Mounting Information... Center reading head... First Steps...
Encoder Installation Manual For: Bridgeport Series I Vertical Knee Mill and other similar mills Longitudinal X Axis front table mount Longitudinal Installation... *Supplied with encoder hardware **Supplied
More informationSliding Pocket Door Systems
Sliding Pocket Door Systems W H DH Finished Floor Level DW Install at finished floor level. DOOR PANEL DW DH frame OVERALL DIMENSIONS width W H W H To obtain a sliding pocket door with two leafs it s necessary
More informationParts Included: Tools Required: Canvas Office Landscape Interiors Off Module 90 Connector Kit Installation and Disassembly for Recycling Instructions
Y Parts Included: Canvas Office Landscape Interiors Off Module 90 Connector Kit Installation and Disassembly for Recycling Instructions FT127.A N Shim A Light Seal B Foam Light Seal C G H Double-Face Tape
More information1 Single & Double Gang Enclosures
Install Guide 1 Single & Double Gang Enclosures Drywall, Stone, & Wood Applications TRUFIG can be installed in a variety of finishes and surfaces. This guide will detail the install of single and double
More informationWindload Post 9100/9600/9900 Installation Instructions
Windload Post 9100/9600/9900 Installation Instructions Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com Wayne-Dalton Corp. P.O. Box 67 Mt. Hope,
More informationSlide Rail Kit DVA-ASRK-28A DVA-ASRK-36A. Installation Manual
Slide Rail Kit DVA-ASRK-28A DVA-ASRK-36A en Installation Manual Slide Rail Kit Installation Manual Table of Contents en 3 Table of Contents 1 Introduction.......................................................................
More informationASSEMBLY AND ADJUSTMENT
EPPA MONITOR ARM EPPA Rev A 10/17 Model EPPA-XXX ASSEMBLY AND ADJUSTMENT EPPA MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment procedures. Check
More informationLC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60
More informationMarine PC MPC-SL17 USER MANUAL
Marine PC MPC-SL17 USER MANUAL 17 IP-65 Marine Display Sunlight Readable LED B/L LCD (1st Edition 2009) All information is subject to change without notice. Approved by Checked by Prepared by Erik Hank
More informationInstallation Instructions For Heavy Duty (FAS Models) and Median (FAM Models) Air Conditioners
Installation Instructions For Heavy Duty (FAS Models) and Median (FAM Models) Air Conditioners Please read ALL instructions before installing. Two people are recommended to install this product. If a new
More informationWall Mount Kit for Elo IDS-02 Series IDS Displays
Quick Installation Guide Wall Mount Kit for Elo IDS-02 Series IDS Displays Revision B P/N UM600076 Safety Warning: Do not install this equipment on any wall or structure that is not capable of supporting
More informationSuper Sky Surfer 2000 Assembly Instructions
Super Sky Surfer 2000 Assembly Instructions Note: Plug and Play version of the Sky Surfer comes with fuselage pre-glued and motor/servos installed. If you wish to route antennas or wires through the tail,
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationAluminum Sprinter Rack Installation
INSTALLATION INSTRUCTIONS MyGlassTruck.com Division of Demountable Concepts, Inc Aluminum MyGlassTruck.Com Demountable Concepts, Inc. 200 Acorn Rd. Glassboro, NJ 08028 800.254.3643 toll free 856.863.0900
More informationLIGHT FIXTURES MUST BE COMPLETELY INSTALLED PRIOR TO CEILING CONSTRUCTION
CAUTION: BEFORE BEGINNING INSTALLATION REVIEW LAYOUT DRAWINGS, AND SHIPMENT. MAKE SURE ALL LIGHT S AND MATERIALS ARE ON SITE AND READILY ACCESSIBLE. IF ANY ICON MATERIALS ARE MISSING, CONTACT ICON INTERNATIONAL
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: Ceiling mount for LC screens up to 29" Models: LCC 18, LCC 18-S, LCC 36, LCC 36-S Patent Pending Features: Comes in two adjustable height ranges (in 1" increments): 18"-30" and
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B PFD30 Fire Door Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
More informationThese 15U, 22U, 37U, 42U, and 51U racks provide exceptional stability.
RM7000A-R2 RM7003A-R2 RM7006 RM7001A-R2 RM7004A-R2 RM7007 RM7002 RM7005A-R2 RM7008A-R2 RM7010 4-Post Steel Open Racks These 15U, 22U, 37U, 42U, and 51U racks provide exceptional stability. Hold up to 2200
More informationED5200(A) Series Rim Exit Devices
ED5200(A) Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 4/10 (617350602) For Metal, Composite and Wood Doors of Either Hand End Clamp (3) 8-32 x 5/16" Flat
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationINSTALLATION GUIDE. Flat Panel Arm Mount MLA100-L. VESA 100x100 compatible. Support 10" to 24" Screens Max Load Capacity: 30 lbs (15 kg)
INSTALLATION GUIDE Flat Panel Arm Mount MLA100-L Support 10" to 24" Screens Max Load Capacity: 30 lbs (15 kg) VESA 100x100 compatible Note: Read entire instruction sheet before you start installation and
More information788XL Dado Jig Owners Manual Please Read Carefully!
788XL Dado Jig Owners Manual Please Read Carefully! 788XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
More informationINSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800
INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800 The PAC-800 Lateral Shift Accessory is for use with Chief Model PSM, PST, PRO, PLP, Large Flat Panel Display wall mounts. It can be installed
More informationCable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
More informationINSTALLATION GUIDE Hisense Laser TV Display Screen
INSTALLATION GUIDE Hisense Laser TV Display Screen Before you install this product, read this guide completely and make sure you understand all of the content. ES-G1811M2-1 ENGLISH Product Description
More informationDX-TVMLPTB03. Low-Profile TV Wall Mount ASSEMBLY GUIDE. For either wood-stud or concrete wall installations
ASSEMBLY GUIDE DX-TVMLPTB03 Low-Profile TV Wall Mount For either wood-stud or concrete wall installations Safety information and specifications...2 Tools needed...........................3 Package contents......................3
More informationMM750 Installation Instructions
MM750 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationCustom Wood Frame Overlay for Glass Doors Installation Instructions
MARVEL CUSTOM WOOD FRAME OVERLAY FOR GLASS DOORS Custom Wood Frame Overlay for Glass Doors Installation Instructions Wine Cellars 6SWC 6SWCE 61WC 61WCM 66SWC (2 required) 66SWCE (2 required) Beverage Centers
More informationLOWLINE SINGLE FOLD DOWN WALL BEDS
ASSEMBLY INSTRUCTIONS LOWLINE SINGLE FOLD DOWN WALL BEDS Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer Drill for Masonry) 6.5mm
More informationSmall Projection port, Small View port Installation procedure
Small Projection port, Small View port Installation procedure Wall Cut-out Materials required: 8 1/4 x 2 or longer lag, sheet metal, or wood screws. 4-8 Ft Foam insulating material, caulk, rubber etc...
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SHOWER Englefield has a history of making superb showers and their popularity is testament to their quality and affordability. It s the details that Englefield cares about - from
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B P7001 Standard Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
More informationINSTALLATION GUIDE. English
INSTALLATION GUIDE Hisense Laser TV Display Screen Before you install this product, read this guide completely and make sure you understand all of the content. ES-A18A102-1 English Maintenance We recommend
More informationJML " STOP. 44lbs 20kg. 81cm. AVF Group Ltd. Road 30. Hortonwood Ind Est, Telford, Shropshire, TF1 7YE, England. Leaflet No.
JML2400 Leaflet No. 463446 rev00 STOP Read through LL instructions before commencing installation. If you have any questions about this product or issues with installation contact the customer services
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationPFXGP4201TADW. Pro-face Xycom GP4000 PFXGP4201TADW
PFXGP4201TADW http://www.axcontrol.com/automation/pro-face/gp-4000/pfxgp4201tadw Pro-face Xycom GP4000 PFXGP4201TADW Pro-face Xycom GP-4201TW GP4201TW Touch Screen Operator Interface 3.5 TFT Color LCD
More informationINS A KSCR INSTALLATION INSTRUCTIONS STANDARD PROCEDURE. 1. Unpacking the KSCR Splicing the KSCR (If Required)...
INS-88.500-0A KSCR INSTALLATION INSTRUCTIONS STANDARD PROCEDURE 1. Unpacking the KSCR... 2 2. Splicing the KSCR (If Required)... 4 3. Assemble Curb and Rail Corners... 5 4. Install Cross Bracing (If Required)...
More informationSIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationLCD MONITOR/TV WALL MOUNT
INSTALLATION INSTRUCTIONS LCD MONITOR/TV WALL MOUNT DUAL DESK CLAMP (RFCD-110) S CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION
More informationPTC Model 4. Programmable Turntable Controller. Basic Motor Mount Kit P/N Installation Instructions
PTC Model 4 Programmable Turntable Controller M Basic Motor Mount Kit P/N 09-820 Installation Instructions New York Railway Supply 625 Aviator Dr Fort Worth TX 76179 (817) 233-5068 http://www.nyrs.com
More informationINSTRUCTIONS FOR 1431 Door Closer with Hold Open Arms 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
INSTRUCTIONS FOR Door Closer with Hold Open Arms SERIES ADJUSTABLE FROM SIZE THRU 6 FOR INSTALLATION ASSISTANCE CALL SARGENT AT -800-77-77 / www.sargentlock.com Installation Instructions based on Application
More information7902 Dado Jig. Owners Manual Please Read Carefully! Hardware List: 7902 Parts List:
7902 Dado Jig Owners Manual Please Read Carefully! 7902 Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Please read the instructions at least
More informationInstallation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
More informationProBuilder Series CoolSmart TV (42PB - sku# )(54PB - sku# )(72PB - sku# )
Compatibility ProBuilder Series CoolSmart TV ProBuilder Series Linear Fireplaces (42PB, 54PB & 72PB) Packing List Convection Manifold (with grill and mounting brackets pre-attached) 5 Diameter Aluminum
More informationSYSTIMAX 12A1 Cable Clamp Kit Instructions For Crossply-, R/L-, and LXE-Type Cable
Instruction Sheet 860063510 Issue 4, June 2013 SYSTIMAX Solutions SYSTIMAX 12A1 Cable Clamp Kit Instructions For Crossply-, R/L-, and LXE-Type Cable General The SYSTIMAX 12A1 cable clamp kit is used to
More informationPerfect Fit blinds. Preparation. Measuring Instructions. Step 1 - Measure glass size. Step 2 - Measure window depth
Preparation Before you begin, ensure there is a 6mm clearance all around the outside of your window beading to allow enough room for the Perfect Fit framework. Also check that the seals of your window
More informationMounting instructions SZ210 Full-frame pedestal with screw-on tube with placement hinge, for type SCHATTELLO
This height will be made to order. Mounting instructions SZ210 Full-frame pedestal with screw-on tube with placement hinge, for type SCHATTELLO The following instructions include all information necessary
More information7878 K940. Checkpoint Antenna. Kit Instructions. Issue B
7878 K940 Checkpoint Antenna Kit Instructions Issue B Revision Record Issue Date Remarks A July 7, 2009 First issue B Nov2013 Revised the Checkpoint installation procedures for 7878 and 7874 scanners Added
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationKai Installation Instructions
Kai Installation Instructions Before Beginning Installation Read through the entire instruction thoroughly A minimum of 2 people are required for this assembly These instructions reflect typical assemblies;
More informationTOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationQuick-Release Sliding Tail Vise 05G30.01
Quick-Release Sliding Tail Vise 05G30.01 U.S. Des. Pat. No. D671,812 U.S. Pat. No. 9,050,710 Introduction The Veritas Quick-Release Sliding Tail Vise is a reworked version of the well-known tail vise that
More information