FRONT SIDE REAR BOTTOM INTELLITOUCH ONLY OPTIONAL OSD REMOTE P/N E (1 INCLUDED WITH TOUCHMONITOR) DIMENSIONAL DRAWING, 3243L SHEET 1 OF

Size: px

Start display at page:

Download "FRONT SIDE REAR BOTTOM INTELLITOUCH ONLY OPTIONAL OSD REMOTE P/N E (1 INCLUDED WITH TOUCHMONITOR) DIMENSIONAL DRAWING, 3243L SHEET 1 OF"

Gladys Jennifer Park
6 years ago
Views:

1 INTELLITOUCH ONLY ACTIVE AREA = BEZEL OPENING = ACTIVE AREA = BEZEL OPENING = FRONT SIDE REAR SEE A BOTTOM AC POWER IN USB TOUCHSCREEN OUTPUT OSD VGA INPUT HDMI INPUT DVI INPUT A SCALE 4:5 OPTIONAL OSD REMOTE P/N E4837 (1 INCLUDED WITH TOUCHMONITOR) SHEET 1 OF 6

2 INTELLITOUCH ONLY SIDE MOUNT HORIZONTAL (TOP/BOTTOM) 400 M6 THREAD MAX THREAD DEPTH = 10MM, X4 200 VESA MOUNT PER MIS-F, 400,200, 6 SIDE MOUNT VERTICAL (LEFT/RIGHT) SHEET 2 OF 6

3 INTELLITOUCH ONLY MOUNTING WITH ADJUSTABLE BRACKETS (8 PROVIDED) ,x8 10,x # # R 2.2 MOUNTING HOLES, x16, FOR FRONT-ENTRY SCREWS: CLEARANCE HOLES FOR M4 MACHINE SCREWS RECOMMENDED CUSTOMER PANEL CUT-OUT MOUNTING HOLES, x16, FOR REAR-ENTRY SCREWS: 1. IF CUSTOMER PANEL IS WOOD, PILOT HOLES FOR 4MM WOOD SCREWS. 2. IF CUSTOMER PANEL IS METAL, BLIND TAPPED M4 THREADED HOLES FOR M4 STUDS. 1 to -25 SHEET 3 OF 6

4 PCAP ONLY B SCALE 1: (EDGE OF GLASS) 55 SEE B (ACTIVE AREA) (CHASSIS) (ACTIVE AREA) 452 (EDGE OF GLASS) C SCALE 1: (CHASSIS) SEE C FRONT SIDE REAR SEE D BOTTOM USB TOUCHSCREEN OUTPUT OSD HDMI INPUT AC POWER IN VGA INPUT DVI INPUT D SCALE 1:1 SHEET 4 OF 6 DATE: 03/02/16

5 PCAP ONLY 28.4 INSTALLATION NOTES: 1. DURING HANDLING AND INSTALLATION, DO NOT REST WEIGHT OF MONITOR ON EXPOSED TOUCHSCREEN EDGE. AVOID EXCESSIVE PRESSURE OR SHARP IMPACTS ON TOUCHSCREEN EDGE. DAMAGE TO TOUCHSCREEN AMY OCCUR. 2. MONITOR SHOULD BE MOUNTED WITH TOUCHSCREEN FLUSH TO CUSTOMER KIOSK FRONT SURFACE(WITHIN #0.3mm TOLERANCE). 3. KIOSK DESIGN SHOULD PROTECT TOUCHSCREEN EDGE TO AVOID ACCIDENTAL DAMAGE DURING USE AND CLEANING. 400 SIDE MOUNT HORIZONTAL (TOP/BOTTOM) M6 THREAD MAX THREAD DEPTH = 10MM, X4 443 (SIDE MTG. HOLES) (SIDE MOUNTING HOLES) VESA MOUNT PER MIS-F, 400,200, 6 SIDE MOUNT VERTICAL (LEFT/RIGHT) SHEET 5 OF 6 DATE: 03/02/16

6 OPTIONAL PROJECTED CAPACITIVE FLUSHMOUNT KIT, P/N E ORDER SEPARATELY, CUSTOMER ASSEMBLED ( 55 ) CUSTOMER PANEL THICKNESS: 1.3 MM TO 26.3MM # # , THRU, X16 M4 THREAD, X16 MOUNTING HOLES, 16X, FOR REAR-ENTRY SCREWS: 1. IF CUSTOMER PANEL IS WOOD, PILOT HOLES FOR 4MM WOOD SCREWS. 2. IF CUSTOMER PANEL IS METAL, BLIND TAPPED M4 THREADED HOLES OR M4 STUDS. MOUNTING HOLES, 16X, FOR FRONT-ENTRY SCREWS: CLEARANCE HOLES FOR M4 MACHINE SCREWS RECOMMENDED CUSTOMER PANEL CUTOUT INSTALLATION INSTRUCTIONS: 1. ATTACH BRACKETS "A" TO TOUCHMONITOR WITH QTY 2 M4 HEX HEAD SCREWS (INCLUDED), 8X 2. ATTACH BRACKETS "B" TO TOUCHMONITOR WITH QTY 2 M4 HEX HEAD SCREWS (INCLUDED), 8X CUSTOMER PANEL BRACKET C 3. ATTACH BRACKETS "C" LOOSELY TO TOUCHMONITOR WITH QTY 2 M4 HEAD HEAD SCREWS (INCLUDED), 8X 4. ADJUST DEPTH OF BRACKET "C" SUCH THAT FACE OF BRACKET SITS BELOW TOUCHSCREEN SURFACE APPROXIMATELY THE SAME DISTANCE AS THE CUSTOMER PANEL THICKNESS. TIGHTEN SCREWS HOLDING BRACKET "C". 5. INSTALL TOUCHMONITOR INTO CUSTOMER PANEL OPENING FROM BACK SIDE, TAKING CARE NOT TO DAMAGE TOUCHSCREEN GLASS EDGE. CENTER TOUCHMONITOR IN OPENING USING SHIMS. 6. SECURE TOUCHMONITOR TO CUSTOMER PANEL USING CUSTOMER-SUPPLIED HARDWARE. ADJUST BRACKETS "C" IF GLASS IS NOT FLUSH TO CUSTOMER PANEL. 7. SEAL GAP BETWEEN TOUCHSCREEN GLASS AND CUSTOMER PANEL USING SILICONE. MASK OFF TOUCHSCREEN SURFACE TO ENSURE NO SEALANT LEAKS ONTO FRONT OF GLASS. BRACKET B BRACKET C (ADJUSTABLE) BRACKET A BRACKET B BRACKET A TOUCHSCREEN SURFACE CAUTION: WHEN ASSEMBLED, THIS SURFACE} SHOULD NOT PROTRUDE BEYOND CUSTOMER PANEL SURFACE ANYWHERE AROUND PERIMETER OF SCREEN CUSTOMER PANEL SEAL PER NOTE 7 SHEET 6 OF 6

INTELLITOUCH / SECURE TOUCH MODELS ONLY

NOTE: ALL DIMS. +/- 1mm UNLESS NOTED INTELLITOUCH / SECURE TOUCH MODELS ONLY 511.7 42.6 (Max. 44.6mm) 476.64 (ACTIVE AREA) 268.11 (ACTIVE AREA) 298.1 12V DC POWER INPUT VGA VIDEO INPUT USB TOUCH SCREEN