Light Structural Main Runner Light Structural Infill Tees. Straight Connector. Strut Structural Tee thread
|
|
- Emil Bailey
- 5 years ago
- Views:
Transcription
1 Internal Splice Support Connector 85.6 Straight Connector *Note: All Dimensions are in Millimeters U-Shape Connector, Hex Bolts, & Channel Nuts L-Angle Connector for Light Structural Infill connections Strut Main Runner 2.6 Internal Splice Support Connector Field Connector Strut Structural Tee U-Shaped Connector 6.4 Light Structural Main Runner Light Structural Infill Tees Straight Connectors for Strut connections 4-20 thread Field Connector STRUCTURAL GRID SPECIFICATIONS Structural suspended ceiling grid system consists of steel strut with Light Structural Infill White painted finish Steel Strut profile ₒ Center-on-Center Grid Spacing can be selected to accommodate project specific specs (See page 3) ₒ static/uniform load based on span (table ) ₒ Continuous slot on top and bottom of Steel Strut ₒ Capable of supporting cable trays, caging, and other heavy duty accessories Light Structural Infill ₒ Center-on-Center Grid Spacing can be selected to accommodate project specific specs (See page 3) ₒ Structural aluminum extrusion ₒ Capable of supporting ceiling tiles, light fixtures,and other lightweight flange supported accessories COMPONENTS Steel Strut Grid ₒ Steel Strut Main Runner ₒ Steel Strut Structural Tees ₒ Strut Straight Connectors ₒ U-Shaped Strut Connector ₒ Internal Splice Support Connector ₒ 2-3 Channel Nut with Spring ₒ 2-3 x.5 Hex Head Bolt ₒ 2-3 x 7.85 lg w/ Starter Rod Light Structural Infill ₒ Light Structural Main Runner ₒ Light Structural Infill Tees ₒ Light Structural L-Angle Connector ₒ Light Structural Field Connector ₒ x 7 lg w/ Starter Rod Factory Applied Gasket available upon request COMPONENTS BY OTHERS Ceiling tiles, light fixtures, or other accessories All-thread and attachment to building structure Channel Nuts and all-thread to attach equipment below steel strut Aluminum Perimeter Angle Simple Channel Nut Assemblies are used for Strut connections Open slots for connecting cable trays, utilities and other accessories via Channel Nuts of 9
2 TABLE : PERFORMANCE CRITERIA BASED ON SPAN LENGTH To determine load capacities and corresponding deflections based on span lengths, use this chart L SPAN (cm) L (Span between Supports) = cm E (Modulus of Elasticity) = 20.69x0 6 N/cm 2 I (Moment of Inertia) = 32.84cm 4 P P D P ULF USF Point Yield Point (kg) Yield Point (cm) Point Various Deflections (kg) SPAN /80 SPAN/240 SPAN/360 Uniform Load (kg/m) D (Deflection) = 9.8xPL 3 /48EI ULF (Uniform Load/m) = P/(L/00x2) USF (Uniform Load/m 2 ) = P/(L/00) 2 TABLE 2: PERFORMANCE CRITERIA BASED ON SLOT CONNECTION Uniform Load (kg/m 2 ) imum point load locations are to be no less than the length of the strut span in any given direction 2. imum point loads are limited by the turnbuckle connections to strut. s are required to be within 2 of a Main Runner Splice Hanging Method Connection to Top Slot Connection to Bottom Slot Min. Design Load (kg) 590 kg 795 kg Min. Ultimate Load (kg) 375 kg 590 kg 2 of 9
3 DETERMINING GRID SPACING AND TILE SIZING: EXAMPLE Grid Spacing - Length Grid Spacing - Width Grid Spacing - Width W W W W Grid Spacing - Width W W If you want the Strut Spacing to be on a 2400mm x 2400mm module size, use this table to determine tile size requirement: Grid Profile Grid Spacing (W x L) (W x L) Tate Strut 2400mm x 2400mm 579mm x 70mm +/- 4mm If you want the Strut Spacing to be on a larger module size to fit standard 600mm x 200mm nominal tile sizes, use this table: Grid Profile Grid Spacing (W x L) (W x L) Tate Strut 2458mm x 2446mm 593mm x 93mm +/- 4mm 3 of 9
4 STRAIGHT CONNECTOR ASSEMBLY Structural Tee coped for simplified installation and stronger connections Straight Connector Channel Nuts are used to secure the load to the Strut System Channel Nuts are used to secure connections to Main Runners and Structural Tees STRAIGHT CONNECTOR ASSEMBLY 3 4. Main Runner 2. Structural Tees 3.Straight Connector 4. Hex Bolt 5. Channel Nut and Spring Straight Connector joining two Structural Tees on either side of a Main Runner. Note all Structural Tees have factory coped ends 4 of 9
5 U-SHAPED & INTERNAL SPLICE SUPPORT CONNECTOR ASSEMBLY U-Shaped Connection Hex Nut Internal Splice Support Connector Channel Nut Straight Connector with Assembly must be placed a imum Distance of 300mm from U-Shaped Connector Internal Splice Support Connector imum Distance of 300mm Internal Splice Support Connectors must be installed inside the bottom of a Main Runner Splice 5 of 9
6 FIELD CONNECTOR ASSEMBLY Light Structural Main Runners notched to positively position connectors on center every time Light Structural Infill coped for simplified installation and stronger connections Ribs on connector to align with grid and prevent racking LIGHT STRUCTURAL INFILL Coped Light Structural Infill connection via L-Angle Connector and pre-drilled Main Runner for simple assembly Light Structural Infill with Field Connectors and Connection. 6 of 9
7 Repeating infill pattern between struts as per project specification. PERIMETER ANGLE Main Runners and Structural Tees are utilized when installing with a floating detail in conjunction with Perimeter Angles. Perimeter Angles can be cut on site to desired length when assembled along perimeter walls. Perimeter Angles are bolted directly to the wall with appropriate fasteners for wall type. Main Runner Perimeter Angle 7 of 9
8 600mm X 200mm CEILING GRID WITH 200mm X 200mm TURNBUCKLE LAYOUT Light Structural Infill Light Structural Infill Strut Main Runner 2 Strut Structural Tee 3 Field Connectors L-Angle Connector Main Runner Tees 2-3 x 7.85 lg 7 U-Shaped Connector 8 Internal Splice Support 9 Straight Connector x 7 8 of 9
9 FIELD CONNECTOR TURNBUCKLE ASSEMBLY STRAIGHT CONNECTOR TURNBUCKLE ASSEMBLY Internally Threaded Anchor (Supplied by others) RH M0-.5 Threaded Rod and connection to decking (Supplied by others) RH 2-3 Threaded Rod and connection to decking (Supplied by others) M0-.5 LH/RH x 78mm 2-3 LH/ RH x 7.85 lg M0-.5 Threaded Starter Rod into 2-3 Threaded Starter Rod into Hex Bolts M0-.5 RH Threaded Connection to Field Connector Hex Nut and Washer Straight Connector Channel Nuts and Springs 9 of 9
T-GRID SYSTEM WIDE CLEANROOM CEILING GRID SYSTEM
T-GRID SYSTEM 1.1 2 WIDE CLEANROOM CEILING GRID SYSTEM Updated: 4-18-2012 UOVERVIEW The CleanPro T-Grid ystem is designed for carrying the load of standard filter modules for Class 10 to Class 100,000
More informationXL MAX. Suspension System Data Center Ceiling Solutions. Assembly and Installation Instructions
PRELUDE Top Lock XL MAX (4) #8 x 1/" Long Main Beam Sharp Point Truss Head Screws Suspension System Data Center Ceiling Solutions Assembly and Installation Instructions SYSTEM OVERVIEW The Prelude XL Max
More information5 ACCESS PANEL INSTALLATION SPACER *SLIDE TO LOCATION OF FASTENER DURING INSTALLATION OF EACH FASTENER
1/2 K.O. (3/8 K.O. on 165 with factory supplied 3/8 flex conduit fitting) TR - Trim Flange Side Blocking Install Method Secure fixture to structure following instructions below: 1. Remove lens and internal
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationLightplane 3.5 Recessed
INSTALLATION INSTRUCTIONS Lightplane 3.5 Recessed LP3.5R Recessed Ceiling IMPORTANT SAFETY INSTRUCTIONS When installing or using this fixtures basic safety precautions must be followed. Read all instructions
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationINSTALLATION INSTRUCTIONS FOR HAND OPERATED SILENT STEEL ADC HEAVY DUTY CURTAIN TRACK MODELS: 280, 281, 282, 280-A, 283-N, 283-R
INSTALLATION INSTRUCTIONS FOR HAND OPERATED SILENT STEEL ADC HEAVY DUTY CURTAIN TRACK MODELS: 280, 281, 282, 280-A, 283-N, 283-R I. SUSPENDED INSTALLATIONS 1. Lay the two track halves on the floor with
More informationFaux Wood Beams Installation
HDF Interior U Shaped Beams Start with clean, sound substrate; if applying over a painted surface make sure that the paint is load bearing. Figure out the desired layout for all beams. Mark the inside
More informationInc. BT Series. BW Series
Inc. 2013 BT Series BW Series Inc. Fast Installation One of the prime features of the RangeRack cable tray design is that the channel-style siderails accept spring nuts. This eliminates the need for any
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationCABTRAY Why you need it!
Cabtray CABTRAY Standard Range CABTRAY Load Carrying Capacity CABTRAY Tray Joiners CABLOK Composite Connectors CABTRAY Tray Joiners CABTRAY Support Systems CABTRAY Brackets CABTRAY Accessories CABTRAY
More informationAluminium Structural Framing
info@smoothedge.co.za a division of Smoothedge SA (Pty) Ltd. Aluminium Structural Framing Aluminium vs Steel How do T-slots compare to welded steel products? T-slots were created to build structures faster
More informationINSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
More informationSoundscapes Shapes Acoustical Clouds
Soundscapes Shapes Acoustical Clouds Assembly and Installation Instructions DO NOT REMOVE PANELS FROM THE CARTON UNTIL YOU HAVE READ THESE INSTRUCTIONS IN THEIR ENTIRETY. LOCATE HARDWARE ACCESSORY KITS
More informationFast, Flexible, Functional
FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard
More information- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS. Factory pre-installed mud flange TOOLS REQUIRED: Phillips screwdriver, 5/16 nut driver.
- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS TruGroove Drywall A3 MOUNTING Ceiling INSTALLATION System Overview These instructions review how to install drywall trim versions of TruGroove recessed
More informationMidwest Roadside Safety Facility
28 Spaces @ 75"=2100" 100' 3:1 Cut 40' 75" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 75" 300" or Two 12'-6" Section End Section 300" or Two 12'-6"
More informationMidwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 100'-0" 3:1 Cut 40'-0" 6'-3" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 6'-3" 25'-0" or Two Section 12-gauge End Section 25'-0"
More informationMidwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 6'-3" (TYP.) 8'-0" Soil Cut 1 2 3 4 5 6 7 8 9 10 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 25 C.I.P. 26 6'-3" 25'-0" or Two Section End Section 25'-0" or Two Section End Section
More informationCARRIER OVERHANG 1'-0" MAX PANEL LENGTH 3'-0" MIN - 16'-0" MAX (RECOMMENDED) SPECIFICATIONS (unless noted otherwise)
DETAIL 5 32 5 " 27 32 " 6" OPTIONAL FLAT RECESSED CLOSURE 1 1 4 " 17 32 " 1 25 32 " OPTIONAL BUTTERFLY CLOSURE CARRIER OVERHANG 1'-0" MAX CARRIER SPAN 4'-0" 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationMidwest Roadside Safety Facility
2 Spaces @ 75" [05]= 150" 3810 4 Spaces @ 3 Spaces @ 4 Spaces @ 18.75" 37.5" [953]= 37.5" [953]= [476] 112 1/2" 150" = 75" 2857 3810 [05] 18 476 7 Spaces @ 75" [05]=525" [13335] 21 20 18 17 1615 14 1312
More informationINSTALLATION: D1-NOTCH DRYWALL TRIM FLANGE
T F W 604.549.979 604.549.9555 fluxwerx.com INSTALLATION: D1-NOTCH DRYWALL TRIM FLANGE fixture housing endcap kit optic kit join kit notch 2 cross section notch 4 cross section 4 4" 4-11/2" 4 /8 (111)
More informationMETALWORKS TARTAN PANELS General Installation Instructions
CEILING SYSTEMS METALWORKS TARTAN PANELS General Installation Instructions 1. GENERAL 1.1. Product Description MetalWorks Tartan system is a combination of metal ceiling panels available in a range of
More informationSTRUCTURAL HOLDING, CT6 TOOL BOARD, AND CART ASSEMBLY
STRUCTURAL HOLDING, CT6 TOOL BOARD, AND CART ASSEMBLY IN20765 2015 Chief Automotive Technologies CO9545.5 Rev. - 11/02/15 CT6 Structural Holding Tool Board Cart Step 1: Caster Assembly. A.) Assemble 5
More informationMSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox
INSTALLATION INSTRUCTIONS MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit provides a sturdy support for LCD displays
More informationABW-4-SSP ABW-5-SSP 5 ABW-6-SSP 6 ABW-7-SSP 7 ABW-4-ESP ABW-5-ESP 5 ABW-6-ESP 6 ABW-7-ESP 7 ABW(*)24HSP ABW(*)36HSP. Furnished in pairs with hardware.
Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. ABW--SSP ABW--SSP
More informationINSTALLATION INSTRUCTIONS FOR HAND OPERATED MODELS: 170, 171-R, 171-N, 172, 260
INSTALLATION INSTRUCTIONS FOR HAND OPERATED MODELS: 170, 171-R, 171-N, 172, 260 I. SUSPENDED INSTALLATIONS NOTE: MODEL 260 FENSTEEL TRACK IS ASSEMBLED IN THE SAME MANNER AS DESCRIBED BELOW WITH THE EXCEPTION
More informationInstallation Instructions Standalone or continuous run configurations - 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS
- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS TruGroove Drywall A3 MOUNTING Ceiling INSTALLATION System Overview These instructions review how to install trimless drywall versions of TruGroove
More informationCEILING SYSTEMS. Between us, ideas become reality. Installing. Suspended Ceilings. International Version
CEILING SYSTEMS Between us, ideas become reality Installing Suspended Ceilings International Version 1 Installing Armstrong Suspended Ceilings An Armstrong suspended mineral fiber ceiling is functional,
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationEZYMESH CABLE MESH EZYMESH. Cable Support Systems
EZYMESH CABLE MESH EZYMESH 50 500 00 150 PRODUCT DETAILS EzyStrut EzyMesh provides premium performance in commercial and light industrial applications. Strong, versatile and easy to install EzyMesh is
More information99 Straight Sections 100 fittings, splices & connectors. 103 fasteners
99 Straight Sections 100 fittings, splices & connectors 102 accessories 103 Cable unway is available in two styles, tubular side rails that are lightweight yet strong and solid-bar side rails that offer
More informationCABLE TRAY SYSTEM 136
CABLE TRAY SYSTEM 136 137 WIRE MESH TRAY SYSTEM 138 139 WIRE MESH TRAY SYSTEM 140 141 WIRE MESH TRAY SYSTEM Wire Mesh Tray width B thickness (t) mm/inch mm/inch mm/inch V GR 35.100 35/1,4 100/3,9 3,5 V
More informationINTERIOR INSTALLATION
6" TWO (2) #6 FASTENERS BY OTHERS, NOT BY HUNTER DOUGLAS, TYP. MAIN TEE PER ASTM C635, BY OTHERS, TYP. 2" HANGER BRACKET ASSEMBLY PRIME BEAM* 2" MAX MAIN TEE T-GRID PER ASTM C635 BY OTHERS SEE DETAIL A.2
More informationSky FactoryTM toll free
Sky FactoryTM www.skyfactory.com toll free 1.866.759.3228 Standard w/ EcoPlus Luminous SkyCeiling Installation Instructions EcoPlus LED light box Standard Elevator Luminous SkyTile Installation Packet
More informationSky FactoryTM toll free
Sky FactoryTM www.skyfactory.com toll free 1.866.759.3228 Classic w/ EcoPlus Luminous SkyCeiling Installation Instructions EcoPlus LED light box Classic Elevator Luminous SkyTile Installation Packet Includes:
More informationDrawer Kit Jeep Wrangler JKU 4-Door (2007 current) READ ME! IMPORTANT WARNING!
Drawer Kit Jeep Wrangler JKU -Door (2007 current) ENG SSDS112 / SSST002 / SSJW002 5 min READ ME! Thank you for purchasing a Front Runner Jeep Wrangler JKU -Door Drawer Kit. Before you start, take a moment
More informationCABLE RUNWAY & TRAY PRODUCTS
CABLE RUNWAY & TRAY PRODUCTS Cable Runway Products Page 3-3 Adjustable Cable Runway Page 3-4 Cable Runway Junction Products Page 3-13 Cable Runway Mounting Products Page 3-17 Cable Runway Support Products
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS A CSW Industrials Company FR and FRE Roof Expansion Joint Covers IMPORTANT The following instructions are very important. Read them carefully, and be sure you understand them
More informationMETALWORKS Concealed. Installation Instructions
METALWORKS Concealed Installation Instructions 1. GENERAL 1.1 Product Description MetalWorks Concealed ceilings consist of perforated and unperforated panels that are downward accessible, and are designed
More informationSwifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
More informationBIKE FILE (301)
B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing
More informationSTRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY
STRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY 150006 2014 Chief Automotive Technologies CO9110.1 Rev. A 12/19/14 F150 Structural Holding Tool Board Cart Step 1: Caster Assembly. A.) Assemble 5
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More informationHeight Adjustable Benching End Panel and Utility Pole
Height Adjustable Benching End Panel and Utility Pole Tools required: END PANEL Jig Saw Power Drill END PANEL WITH UTILITY POLE Bit Holder Long #2 Square Drive Bit 5mm Hex Drive Bit UTILITY POLE Level
More informationOlympia Plus Sports Ceiling Impact Class 1A
Olympia Plus Sports Ceiling Impact Class 1A Suspension system Exposed impact-resistant 50mm grid system 11 6 9 8 12 7 11 4 1 5 3B 3A 10 2 1. 50 mm main runner CMC 3050 2. 50 mm cross tee CMC 3054 3. Hold-down
More informationCable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
More information96 (Standard Length)
Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation
More informationSAVE THESE INSTALLATION INSTRUCTIONS
Light Without Boundaries LUMATO RESERVES THE RIGHT TO CHANGE PRODUCT 7500003 8/4 Light Without Boundaries LUMATO RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL INSTALLATION WARNING To Reduce Risk Of Death,
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationLight Frame Installation Instructions
Light Frame Installation Instructions Typical Panel Details featuring "Profile A" Individual Panel Downward Accessibility Designed and Engineered by:decoustics www.decoustics.com sales@decoustics.com Light
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationMulti-Set II Drop-In Anchors
CONCRETE ANCHORING SPECIALISTS Internally Threaded Heavy- Duty Anchoring Systems DESCRIPTION/SUGGESTED SPECIFICATIONS Drop-In, Shell-Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Drop-In, shell-type
More informationOVERVIEW You are installing 2 Major components: SITE PREP Remove organics
OVERVIEW You are installing 2 Major components: Dimensionally stable exterior frame with pre-drilled thread-bar holes. High yield thread-bar in a predetermined grid pattern (slab) and a heavy concentration
More informationRayport G Eco Ballasted
Rayport G Eco Ballasted Dealer Kit Installation Guide Contents 1. Installer Notes..... P2 2. Parts List........ P3-6 3. Tool List.... P7 4. Assembly.... P8-16 www.aetenergy.com Supporting a Cleaner, Greener
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationSECTION 7 CHANNEL & SUPPORT SYSTEMS
SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationConcealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wall Mount A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Floor Mount Wire Mesh Cable Tray System for Channeling of Cable Wiring Features
More informationBioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
More informationLaser Safety Curtains Page 1 of 5
Laser Safety Curtains Page 1 of 5 Overview For any laser curtain intallation and or hardware questions please do not hesitate to contact Laservision USA at 1-800-393-5565 or chat with our Certified Laser
More informationINSTALLATION GUIDE SM SOLAR MOUNT PUB15JAN01
MOUNT INSTALLATION GUIDE PUB5JAN0 SM SOLAR Wrenches and Torque Wrench Size Recommended Torque (ft-lbs) /4 Hardware 7/6 *0 3/8 Hardware 9/6 *30 # Hardware 5/6 0 Torques are not designed for use with wood
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
More informationREAD ME! IMPORTANT WARNING! ENG. LED Light Bar Rack Mount Brackets
LED Light Bar Rack Mount Brackets ENG RRAC124 READ ME! Thank you for purchasing a Front Runner LED Light Bar Rack Mount Brackets. Before you start, take a moment to familiarize yourself with the Fitting
More informationRockfon System OlympiaPlus A Impact 1A
System description Rockfon System OlympiaPlus A Impact 1A Ceiling systems for special applications Impact resistance SYSTE GRP WAR YEARS IT LIM ED E very single tile is demountable for easy and fast access
More informationRayport G Eco Dealer Kit
Rayport G Eco Dealer Kit Installation Guide www.aetenergy.com Supporting a Cleaner, Greener Tomorrow 1. Table of Contents 1. Table of Contents P2 2. Installer Notes P3 3. Parts List P4-7 4. Tool List P8
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationOffice Partitions WARNING. Assembly Instructions. Customer Service A S S E M B LY HARDWARE H1 H2 H3 H4 H5 H8 H9 H10 H11 H12
Customer Service 1-800-645-2986 Assembly Instructions WARNING In order to prevent structural failure, instability, t i p - o v e r, and/or serious injury, please follow i n s t ructions care f u l l y.
More informationWOODWORKS Concealed. Assembly and Installation Instructions
WOODWORKS Concealed Assembly and Installation Instructions 1.1 Product Description WoodWorks Concealed ceilings consist of perforated and unperforated panels that are downward accessible, and are designed
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationINSTALLATION GUIDE SM SOLAR MOUNT PUB15JUN15
MOUNT INSTALLATION GUIDE PUB5JUN5 Wrenches and Torque SM SOLAR Wrench Size Recommended Torque (ft-lbs) /4 Hardware 7/6 *0 3/8 Hardware 9/6 *30 # Hardware 5/6 0 Torques are not designed for use with wood
More informationROCKFON System Olympia Plus
Installation guide ROCKFON System Olympia Plus Sports Ceiling Impact Class 1A Suspension system Exposed impact-resistant 50mm grid system 11 6 9 8 12 7 11 4 1 5 3B 3A 10 2 1. 50 mm main runner CMC 3050
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
More informationJK Spartacus Stamped Front Bumper
Page 1/14 OMIX-ADA TECHNICAL SUPPORT PHONE: M-F 8am - 5pm EST 1-800-449-6649 EMAIL: techsupport@omix-ada.com FOR WARRANTY INFORMATION VISIT: www.omix-ada.com Page 2/14 Part #11544.01 11544.09 11543.13
More informationCopyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationTS-20KD-1010 LOW PROFILE CARGO SCALE INSTALLATION GUIDE
TS-20KD-1010 LOW PROFILE CARGO SCALE INSTALLATION GUIDE Triner Scale & Mfg. Co., Inc. 8411 Hacks Cross Rd. Olive Branch, MS 38654 Phone: 800-238-0152 Fax: 662-809-2386 Description The Triner Scale Model
More informationINSTALLATION INSTRUCTIONS FOR BALCO, INC. TYPES ACVS 6" & WIDER CEILING JOINT COVER SYSTEMS
2626 South Sheridan PO Box 17249 Wichita, Kansas 67217 Phone: (316) 945-9328 Fax: (316) 945-0789 INSTALLATION INSTRUCTIONS FOR BALCO, INC. TYPES ACVS 6" & WIDER CEILING JOINT COVER SYSTEMS 2012, Balco,
More informationA E D X E X C A C B A L B E L E T R T A R Y
ADE CABE TAY Adex Cable Tray Metallic Adex cable trays are manufactured for the smooth and easy pulling of cable from one point to another to BS EN 61537:2002. e have designed the best cable trays, by
More informationUNIVERSAL SPADE BRACKET RATCHET TYPE
UNIVERSAL SPADE BRACKET RATCHET TYPE RRAC024 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER
More informationEOS LED Surface Mounted Luminaire
Installation Instruction Sheet INSTALLATION INSTRUCTIONS FOR JOINING AND SUSPENDING FIXTURES WARNING WARNING To reduce the risk of death, injury or property damage from fire, electric shock, cuts, abrasions,
More informationMast Solutions Document/Installation Manual
Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile
More informationInstruction Sheet For: SCM-2
Instruction Sheet For: SCM-2 For more information, please contact us at: 345 Log Canoe Circle, Stevensville, Maryland 2666 Toll Free: 877.28.269 Phone: 40.643.6390 Fax: 40.643.665 www.videomount.com 27
More informationCONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
More informationInstallation and Assembly: Ceiling mount for LCD screens up to 29"
Installation and Assembly: Ceiling mount for LC screens up to 29" Models: LCC 18, LCC 18-S, LCC 36, LCC 36-S Patent Pending Features: Comes in two adjustable height ranges (in 1" increments): 18"-30" and
More informationThe fast track. in cable management systems for power, voice and data cables. Reduce installation time up to 50%
The fast track in cable management systems for power, voice and data cables Reduce installation time up to 50% Save TIME QuikLok tray connections at record speed In any project, installation time is key.
More informationMeva Guided Screens MGS Technical Instruction Manual
Meva Guided Screens MGS Technical Instruction Manual Product Characteristics: The MEVA Guided Screens (MGS) system encloses complete floors especially in high-rise construction independent of the height
More informationAXIOM Classic Trim. Assembly and Installation Instructions
AXIOM Classic Trim Assembly and Installation Instructions 1. GENERAL 1.1 Description Axiom Classic Trim is a perimeter trim system designed for use with a variety of Armstrong suspension systems. Classic
More informationINSTRUCTION, BMRA COUPLING BOLT FIELD KIT
LIFT CORPORATION Sht. 1 of 8 DSG# M-13-04 Rev. - Date: 05/28/13 INSTRUCTION, BMRA COUPLING BOLT FIELD KIT KIT P/N 285280-01 HEX BOLT PIN, 3/4-10 X 4-1/2 LG. P/N 900032-7 QTY. 1 FLAT WASHER, 3/4,.090 THICK
More information