WB Fastener Kit (ONLY available with G5W & G5W-PRO Models)

Size: px

Start display at page:

Download "WB Fastener Kit (ONLY available with G5W & G5W-PRO Models)"

Dwight Higgins
5 years ago
Views:

2 Thank you for purchasing a Pro LIFT G5. The Pro LIFT product line is designed to enhance your interactive whiteboards and projectors or LCD. Please follow all assembly instructions correctly to provide optimal use. Only a qualified contractor should install the Pro LIFT G5. If you do not understand any of the assembly instructions, please contact your local re seller or visit. IMPROPER INSTALLATION CAN CAUSE DAMAGE TO YOUR Pro LIFT AND LEAD TO SERIOUS PHYSICAL INJURY. JORO Manufacturing cannot take any responsibility for damage or injury resulting from improper installation. Do not operate Pro LIFT G5 if there are any obstructions below or above the board. Doing so may cause unit malfunction or lead to serious physical injury. The supplied mounting hardware is for use on the Pro LIFT stands only. If you encounter any problems or insufficient hardware during installation, please contact your local re seller.

3 G5 Main Frame Kit 10x M6 x 12mm Socket Cap Screw SILVER LCD Mount Fastener Kit (ONLY available with G5L & G5L-PRO Models) 8x M6 x 20mm Socket Cap Screw Low Profile 4x 5/16x1" SILVER Button Head 8x 8x M6 x 20mm Socket Cap Screw Low Profile JORO Button Head 8x 4x 8x 5/16x1-1/2" Button Head 5/16 Hex Nut 5/16" Washer 2x 2x Wire Mgmt Molding Board Backer Support 1x 3/16" T-Handle Allen Key 5/32" Allen (Hex) Key 1x 1x 3/16" Allen (Hex) Key 5/32" Allen (Hex) Key WB Fastener Kit (ONLY available with G5W & G5W-PRO Models) 16x M6 x 8mm Socket Cap Screw 16x JORO Button Head 18x M6 x 20mm Socket Cap Screw Low Profile 4x 4x 1/4" Washer M6 Hex Nut Machine Screw Insulator 6x 6x Nylon Washer 1x M5 Allen (Hex) Key 1x 5/32" Allen (Hex) Key Note: Parts may not be exactly as shown and not to scale ProLift G5 - G5L ASSY Instructions : 0.004

5 Pro-LIFT G5 Foot Pro-LIFT G5 Foot 1 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Feet For ease of installation, do this step while Pro-LIFT G5 is lying down Be sure to use the 5/16x1-1/2" Button Head screws provided Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

M6 x 20mm Socket Cap Screw 2 Turret Head 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head Mount the Turret Head Be sure to use the M6 x 20mm Socket Cap Screws (Low

6 M6 x 20mm Socket Cap Screw 2 Turret Head 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head Mount the Turret Head Be sure to use the M6 x 20mm Socket Cap Screws (Low Profile) provided Be sure to NOT over tighten If necessary, loosen 5/16x1" Button Head screws to align holes REMEMBER to tighten screws, but DO NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

3 Pro-LIFT G5 Accessory Shelf Part#: WF122412PROL M6 x 20mm Socket Cap Screw 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Accessory Shelf 5/16x1-1/2" Button Head Be sure to use the M6 x 20mm Socket

7 3 Pro-LIFT G5 Accessory Shelf Part#: WF122412PROL M6 x 20mm Socket Cap Screw 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Accessory Shelf 5/16x1-1/2" Button Head Be sure to use the M6 x 20mm Socket Cap Screws supplied Be sure to NOT over tighten If necessary, loosen 5/16x1-1/2" Button Head screws to align holes REMEMBER to tighten screws, but DO NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

8 4 Machine Screw Insulator 1/4" Nylon Washer M6 x 20mm Socket Cap Screw Machine Screw Insulator 1/4" Nylon Washer M6 x 20mm Socket Cap Screw Mount the Pencil Tray Adapters (may not be exactly as shown) Be sure to use the following supplied parts: 1. M6 x 20mm Socket Cap Screw 2. 1/4" Nylon Washer 3. Machine Screw Insulator Do not completely tighten fasteners until pencil tray has been fastened Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

M6 Hex Nut 1/4" Washer 5 WB Hanger (SL-607) Part#: G5-ACC-WBH M6 Hex Nut 1/4" Washer M6 x 20mm Socket Cap Screw M6 x 20mm Socket Cap Screw 5/16x3/4" SILVER Button Head screw Be sure to tighten on

9 M6 Hex Nut 1/4" Washer 5 WB Hanger (SL-607) Part#: G5-ACC-WBH M6 Hex Nut 1/4" Washer M6 x 20mm Socket Cap Screw M6 x 20mm Socket Cap Screw 5/16x3/4" SILVER Button Head screw Be sure to tighten on both angles once WB Hanger has be installed. Mount the WB Hanger BE AWARE the mounting position of the WB Hanger is dependant on projector/white board combination Be sure to use the following supplied parts: 1. M6 x 20mm Socket Cap Screw 2. 1/4" Washer 3. M6 Hex Nut Once the WB Hanger is installed, thighten the 5/16x3/4" SILVER Button Head screws Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

10 6 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder 3/8" Washer Laptop Tray Slider Arm Laptop Tray Arm 3/8" Nylon Washer M6x8mm SILVER Button Head 5/16" Washer 5/16" Nylon Locking Nut Mount the Laptop Tray Arm (if the Laptop Tray was ordered with your product) Fasten the Laptop Tray Arm to the Laptop Tray Slider Arm using the M6x8mm SILVER Button Head Screws supplied If the 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder bolt is not fastened, follow the sequence above Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

11 7 M6x8mm SILVER Button Head Laptop Tray M6x8mm SILVER Button Head Mount the Laptop Tray (if ordered with your product) Be sure to use the fasteners from the LTT Kit Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

12 8 Mounting patterns for tested projectors Match holes in the diagram to projection system being used Fasten projector to the corresponding holes using the JORO Button Head Screws supplied Be sure to NOT over tighten ProLift G5 - G5W ASSY Instructions : 0.003

Mount the white board Use the holes which correspond to manufacturers recommended projector to image distance Fasten using the JORO Button Head screws supplied Be sure to NOT over tighten 9 Note,

13 Mount the white board Use the holes which correspond to manufacturers recommended projector to image distance Fasten using the JORO Button Head screws supplied Be sure to NOT over tighten 9 Note, there are drilled/tapped holes on the frame upright, if lowering the board is required JORO Button Head Mount the Wire Mgmt Molding Mount the Board Backer Support Remove the backing from the double sided tape and attach to outer edge of upright JORO recommends attaching the Board Backer Supports supplied JORO recommends attaching the Wire Mgmt Moldings supplied Remove the backing from the double sided tape and attach to side of frame upright Board Backer Support Wire Mgmt Molding Laptop Tray (if ordered with your product) ProLift G5 - G5W ASSY Instructions : 0.003

14 10

16 Pro-LIFT G5 Foot Pro-LIFT G5 Foot 1 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Feet For ease of installation, do this step while Pro-LIFT G5 is lying down Use the 5/16x1-1/2" Button Head screws provided Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

2 Pro-LIFT G5 Accessory Shelf Part#: WF122412PROL M6 x 20mm Socket Cap Screw 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Accessory Shelf 5/16x1-1/2" Button Head Use the M6 x 20mm Socket Cap

17 2 Pro-LIFT G5 Accessory Shelf Part#: WF122412PROL M6 x 20mm Socket Cap Screw 5/16x1-1/2" Button Head Mount the Pro-LIFT G5 Accessory Shelf 5/16x1-1/2" Button Head Use the M6 x 20mm Socket Cap Screws supplied Do NOT over tighten If necessary, loosen 5/16x1-1/2" Button Head screws to align holes REMEMBER to tighten screws, but DO NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

18 Pro-LIFT LCD ARM 3 5/16x1" SILVER Button Head Pro-LIFT LCD ARM 5/16x1" SILVER Button Head Pro-LIFT LCD ARM Remove Pro-LIFT LCD Arms Remove 5/16x1" SILVER Button Head screws and store in safe place to re-use once LCD is installed. Remove Pro-LIFT LCD Arms ProLift G5 - G5L ASSY Instructions : 0.004

19 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16 Hex Nut 5/16x1" SILVER Button Head 4 5/16 Hex Nut G5-ACC-PT5 5/16x1" SILVER Button Head 5/16 Hex Nut 5/16x1" SILVER Button Head Fasten the 5/16x1" SILVER Button Head screws to the G5-ACC-PT5 Be sure to NOT over tighten 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16 Hex Nut G5-ACC-PT5 5/16 Hex Nut 5/16x1" SILVER Button Head 5/16x1" SILVER Button Head When fastened end result should resemble this ProLift G5 - G5L ASSY Instructions : 0.004

800 VESA 600 VESA 400 VESA 200 VESA 200 VESA 400 VESA 600 VESA 800 VESA 5 Please use the appropriate mounting holes for your LCD (not included) as shown above G5-ACC-PT5 G5-ACC-PT5 LCD fastener from

20 800 VESA 600 VESA 400 VESA 200 VESA 200 VESA 400 VESA 600 VESA 800 VESA 5 Please use the appropriate mounting holes for your LCD (not included) as shown above G5-ACC-PT5 G5-ACC-PT5 LCD fastener from LCD TV kit provided Fasten the G5-ACC-PT5 to your LCD (not included) using the fasteners from the LCD TV Kit. Use the appropriate fasteners as specified in the LCD owners manual Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

6 Pro-LIFT LCD ARM 5/16" Washer Narrow 5/16 Hex Nut 5/16 Hex Nut 5/16" Washer Narrow 5/16 Hex Nut 5/16" Washer Narrow Pro-LIFT LCD ARM 5/16 Hex Nut 5/16" Washer Narrow Mount the

21 6 Pro-LIFT LCD ARM 5/16" Washer Narrow 5/16 Hex Nut 5/16 Hex Nut 5/16" Washer Narrow 5/16 Hex Nut 5/16" Washer Narrow Pro-LIFT LCD ARM 5/16 Hex Nut 5/16" Washer Narrow Mount the Pro-LIFT LCD Arms to G5-ACC-PT5 tubes Mount the Pro-LIFT LCD Arms prior to hanging on the Pro-LIFT G5L Use the fasteners supplied Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

22 Pin 7 Pin 5/16x1" Button Head 5/16x1" Button Head 5/16x1" Button Head Hang the LCD Assembly Hang on all four (4) pins on uprights If necessary, loosen the 5/16x1" Button Head screws to align holes REMEMBER to tighten screws, but do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

23 8 5/16x1" SILVER Button Head 5/16x1" SILVER Button Head Secure Pro-LIFT LCD Arms to Pro-LIFT G5L Frame Use the 5/16x1" SILVER Button Head screws that were removed earlier Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

24 9 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder Bolt 3/8" Washer Laptop Tray Slider Arm Laptop Tray Arm 3/8" Nylon Washer 5/16" Washer M6x6mm Button Head 5/16" Nylon Locking Nut Mount the Laptop Tray Arm (if the Laptop Tray was ordered with your product) Fasten the Laptop Tray Arm to the Laptop Tray Slider Arm using the M6x6mm Button Head Screws supplied If the 3/8" x 4" Lg. - 5/16" Hex Socket Head Shoulder Bolt bolt is not fastened, follow the sequence above Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

25 10 M6x6mm Button Head Laptop Tray M6x6mm Button Head Mount the Laptop Tray (if ordered with your product) Use the fasteners from the LTT Kit Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

26 11 Cable Tray #12 x 5/8" Pan Head Wood Screw Mount the Cable Tray (if ordered with your product) Use the #12 x 5/8" Pan Head Wood Screws supplied Do NOT over tighten ProLift G5 - G5L ASSY Instructions : 0.004

27 12 Wire Mgmt Molding Laptop Tray (if ordered with your product) Mount the Wire Mgmt Molding JORO recommends attaching the Wire Mgmt Moldings supplied Remove the backing from the double sided tape and attach to side of frame upright ProLift G5 - G5L ASSY Instructions : 0.004

28 12

Hatch Whiteboard: Portable Stand Installation Instructions

Hatch Whiteboard: Portable Stand Installation Instructions Remove Projector Wall Plate 1. Open the wall mount for the projector. 2. Remove the shipping screw from the front center of the mount arm. 1 P