INSTALLATION GUIDE 8IWBM-EL. phone: (02) fax: (02)

Size: px
Start display at page:

Download "INSTALLATION GUIDE 8IWBM-EL. phone: (02) fax: (02)"

Transcription

1 INSTALLATION GUIDE 8IWBM-EL phone: (02) fax: (02)

2 CONTENTS 1. DISCLAIMER Page 2 2. WARNINGS & SAFETY INSTRUCTIONS Page 3 3. PACKAGE CONTENTS Page 4 4. SPECIFICATIONS Page INSTALLATION: Attach feet Page 9 6. INSTALLATION: Stand Freeframe upright Page INSTALLATION: Attach switch bracket Page INSTALLATION: Attach projector extension Page INSTALLATION: Attach board Page INSTALLATION: Attach projector arm Page INSTALLATION: Cable management Page INSTALLATION: Attach speakers (optional extra) Page INSTALLATION: Attach laptop shelf Page INSTALLATION: Attach foot brace (retrofit only) Page INSTRUCTION: Raising & lowering board Page INSTRUCTION: Moving Freeframe Page INSTRUCTION: Using the stabilising foot brace Page INSTRUCTION: Folding & unfolding laptop shelf Page INSTRUCTION: Swivel projector out of the way Page INSTRUCTION: Moving Freeframe through doorways Page 25 1

3 1. DISCLAIMER Wilson & Gilkes Pty Ltd, intend to make this manual accurate and complete. However, Wilson & Gilkes Pty Ltd makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. Information contained in this document is subject to change without notice or obligation of any kind. Wilson & Gilkes makes no representation of warranty, expressed or implied, regarding the information contained herein. Wilson & Gilkes assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. 2

4 2. WARNINGS & SAFETY INSTRUCTIONS Failure to read, understand and follow all instructions can result in serious personal injury, damage to equipment or voiding warranty. It is the installer s responsibility to make sure all components are properly installed using the instructions provided.! WARNING! Installation & assembly work must be carried out by properly licenced technicians or qualified trades people. Incorrect installation can cause the Freeframe unit to fall and cause injury. This company assumes no responsibility for injuries or damages that may occur due to improper installation and handling. The unit is designed for use with specific products and weight. Exceeding maximum weight capacity to the moving frame may damage product and equipment and could lead to serious personal injury. Adhering to proper installation instructions is critical in ensuring all components function properly. A small difference in installation can lead to a severely skewed and distorted projection image. In order to obtain a square image without the use of digital adjustment of the projector, follow the step by step instructions as shown. Installation will require the lifting of heavy components. A minimum of two people are required. Fully tighten all mounting screws as specified in the installation instructions. However, attachment points can be damaged if a power drill is used to tighten screws. Screws should be turned by hand first before tightening with a hex key. Do not over tighten screws. Check fasteners regularly to avoid parts becoming loose. Do not allow children to climb onto the frame Make sure cables are not caught between moving parts to ensure cables will not be damaged. Cable tie all loose cables to avoid damage. Watch your head when lowering the board. The projector will lower to head height. Injury can occur from possible collision with head. Do not stand directly underneath the projector. When the Freeframe is not in use, lock the castors and fold the foot brace down to avoid tipping. Make sure the fully raised height of the Freeframe does not exceed the height of the building/room the Freeframe will be used in. 3

5 3. PACKAGE CONTENTS NOTE: Packaged contents may look different to content shown in diagrams Electric Mobile Freeframe Frame (Qty: 1) Projector Extension (Qty: 1) Projector arm & Adjustment system (Qty: 1 set) Tool kit (Qty: 1 set) Includes: hex keys Fastener kit (Qty: 1) Laptop shelf (Qty: 1) Switch brackets (Qty: 1 set) Interactive Whiteboard Mounting brackets (Qty: 1 set) Feet (Qty: 2) Motor Control Box (Qty: 1) Includes: rubber grommets 4

6 4. SPECIFICATIONS Freeframe Model: 8IWBM-EL (Fully closed, without projector attachments) 820mm mm 1082mm 1697mm 1751mm 1504mm 5

7 Freeframe Model: 8IWBM-EL (Fully raised, with all attachments) NOTE: Projector & board shown in diagram is only a rough representation only and is not included in the package. 2493mm 2496mm 1984mm 6

8 Freeframe Model: 8IWBM-EL (Fully closed, with all attachments) NOTE: Projector & board shown in diagram is only a rough representation only and is not included in the package. 820mm 1751mm 2016mm 7

9 Component/ Feature Specifications Description Reference page WEIGHT 8IWBM-EL Freeframe Approx 65kg Freeframe assembled with feet and projector extension only Laptop Shelf Approx 5.9kg MOVEMENT Total Lift 480mm Page 5-7 Projector (horizontal) 220mm (110mm each side) Horizontal/sideways adjustment for projector extension along Freeframe Page 12 DIMENSIONS Height (raised) 2493mm Height of Freeframe & projector extension when fully raised Page 6 Height (closed) 2016mm Height of Freeframe & projector extension when closed Page 7 Depth 820mm Depth of Freeframe with all attachments closed Page 5 Depth (foot brace) mm Depth of Freeframe with foot brace folded up Page 5 Depth (all) 1082mm Depth of Freeframe with laptop shelf & laptop shelf folded down Page 5 Width 1751mm Width of fully assembled Freeframe without Interactive Whiteboard Page 5 8

10 5. INSTALLATION: Attach feet! WARNING! FREEFRAME UNIT EXCEEDS 15KG. TWO MEN OPERATION REQUIRED. (1) Lift Freeframe out of the carton. If required, use the carton as support for the attaching the feet. (2) Attached the feet to the uprights of the IWB frame assembly with M10-35 bolts supplied in fastener kit and tightened using supplied tools. 1 2 M10-35 hex head bolt & washer 9

11 6. INSTALLATION: Stand Freeframe upright 1 3 2! WARNING! (1) Once the feet are attached, tilt the Freeframe assembly forward to stand on the castors on the feet. Apply brakes to castors (2) Lock the castors in place to stop the freeframe from moving. (3) Use the foot brace to give more stability before proceeding to the next stage of installation. For more detailed instructions for the operation of the foot brace, refer to page

12 7. INSTALLATION: Attach switch bracket (1) Attach brackets together as shown with M8 nylock nuts. (2) Attach switch to the brackets by securing it with the plate and M4 nylock nuts. (3) Hook the U shaped bracket around the upright leg of the Freeframe just above the lower horizontal beam. (4) Attach the brackets together to form a clamp around the leg of the Freeframe and tighten with M6 screws. 11

13 8. INSTALLATION: Attach projector extension 110mm 1 110mm (1) Determine the required offset for the projector to be used. (2) Attach projector extension to the top of the Freeframe. 3 (3) Secure projector extension to the Freeframe with socket head screws, nut and rectangular washers supplied in fastener kit. 12

14 9. INSTALLATION: Attach board Refer to instructions for specific Interactive whiteboards. 13

15 10. INSTALLATION: Attach projector arm Refer to instructions for specific projector arms. 14

16 11. INSTALLATION: Cable management 1 2! WARNING! 3 Loose cables can be damaged during the use of the Freeframe. Cable tie all loose cable. 4 Cable tie loose cables to avoid possible damage. Use the path shown as a guide in securing loose cables. 5 (1) Cables from projector go through a hole in the side of the projector arm. (2) Cables comes through the projector arm and over the top and behind the projector frame extension. 6 (3) Cables are secured to the projector frame extension using cable ties through holes on the frame extension. (4) Cables are fed between the two frames. Make sure there is no pinching on the cables. (5) Cables are cable tied to the scissor arms of the cable management system. (6) Cables are fed through or around the control box. 15

17 12. INSTALLATION: Attach speakers (optional extra) 1 (1) Attach speakers to both left and right side mounting brackets using M4 screws. 2 (2) Attach speakers onto the Freeframe by screwing the mounting brackets onto the Freeframe using M8-16 button head screws supplied. 16

18 13. INSTALLATION: Attach laptop shelf (1) Undo tri-wheel from laptop shelp. (2) Hook laptop shelf onto support beam on Freeframe (as shown) (3) Re-attach tri-wheel, and tighten to secure laptop to Freeframe. 17

19 14. INSTALLATION: Attach foot brace (retrofit only) (1) Place Retrofit foot brace over the feet. (2) Screw clamp brackets into place with screws (marked in red) on both sides of the foot brace. Fully tighten the screws by hand to clamp down securely to the foot. 18

20 15. INSTRUCTION: Raising & lowering board 1 (1) To raise or lower the board, use the switch mounted on the side of the Freeframe. 19

21 ! WARNING! Do not stand underneath the projector when to avoid collision/injury to the head. Make sure no one underneath the board or the projector before raising or lowering the board. 20

22 16. INSTRUCTION: Moving Freeframe! WARNING! Wheeling Freeframe in the incorrect way may cause the stand to tip backwards. 1 2 (1) Correct way to push the Freeframe, from the side for more stable movement. (2) Incorrect way of wheeling the Freeframe can cause the stand to become unbalanced and may tip over. 21

23 17. INSTRUCTION: Using the stabilising foot brace! WARNING! Fold the stability brace up when moving Freeframe. Fold the stability brace down to provide stability to the frame. (1A) Folding the brace down. Make sure the lock clip is not in the way. (1B) Turn the lock clip (marked in red) 90 degrees to hold the brace in place. (2A) Turn the lock clip back 90 degrees to allow the brace to fold back up. (2B) Fold brace upwards. 1A 1B 1. Stability brace folded up. Ensure the brace is folded up when moving the freeframe. 2. Stability brace folded down. Ensure the brace is folded down when using the freeframe. 2A 2B

24 18. INSTRUCTION: Folding & unfolding laptop shelf 1 2 FOLDING SHELF DOWN (1) Lift up tab (coloured in red). (2) Let the shelf drop down into place. FOLDING SHELF UP (3) Lift shelf surface upwards. 3 (4) The tab automatically slides back down to hold the shelf up. 4 23

25 19. INSTRUCTION: Swivel projector out of the way (1) Loosen tri-wheel to allow the projector frame extension to swivel along the slot. (2) Swivel the projector frame extension (with projector) to the side. Tighten tri-wheel fully by hand to hold in place. (3) Turn the extension back all the way along the slot to reset to centered position. 24

26 20. INSTRUCTION: Moving Freeframe through doorways 1 2 (1) To move a fully installed Freeframe through a doorway, the projector must be swivelled out of the way, and the laptop shelf folded up. (2) For extra narrow doorways, try wheeling the Freeframe through doorways at an angle. 25

MPA-9000 Universal Ceiling Projector Mount Kit

MPA-9000 Universal Ceiling Projector Mount Kit I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low

More information

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42-55 Page 20 SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management

More information

OB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount

OB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description

More information

PS40/PS55/PS65. Installation Instructions. Articulated TV Wall Mount Range. Issue 002

PS40/PS55/PS65. Installation Instructions. Articulated TV Wall Mount Range. Issue 002 PS40/PS55/PS65 Articulated TV Wall Mount Range Installation Instructions Issue 002 Safety Disclaimer Manual Product Safety Disclaimer - IMPORTANT SAFETY INSTRUCTIONS BELOW WARNING: Failure to provide adequate

More information

Assembly Instructions for Model: VMPR1

Assembly Instructions for Model: VMPR1 Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP

More information

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with

More information

**MOUNTING YOUR MONITOR

**MOUNTING YOUR MONITOR FPP72V200 72 FREE STANDING DISPLAY CART Assembly Instructions Hardware List Ref. Qty. Part No. Description AA 4 030-1128 1/4-20 UNC, 1 3/4 Socket Hd Screws BB 1 030-1129 5/8-11 UNC 1 3/4 Socket Hd Screw

More information

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS The Universal Interface Bracket provides a solution for simplifying inventory of RPA and RPM series mounts and SLB/SLM projector brackets.

More information

Hatch Whiteboard: Portable Stand Installation Instructions

Hatch Whiteboard: Portable Stand Installation Instructions Hatch Whiteboard: Portable Stand Installation Instructions Remove Projector Wall Plate 1. Open the wall mount for the projector. 2. Remove the shipping screw from the front center of the mount arm. 1 P

More information

Speaker Mount Center Channel Speaker Adapter (PAC-301)

Speaker Mount Center Channel Speaker Adapter (PAC-301) I N S T R U C T I O N M A N U A L Speaker Mount Center Channel Speaker Adapter () The Speaker Mount Center Channel Speaker Adapter () uses the same interface as the Side Speaker Adapter and can be used

More information

MM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

MSP-DCCPGTU Large Screen Tilt Display Mount

MSP-DCCPGTU Large Screen Tilt Display Mount INSTALLATION INSTRUCTIONS Large Screen Tilt Display Mount The Large Screen Tilt Display Mount is a quick disconnect mounting solution for large flat panel displays. The mount features infinite adjust ability

More information

Assembly Instructions for Model: MF110

Assembly Instructions for Model: MF110 Assembly Instructions for Model: MF110 Thank you for choosing a Sanus Systems VisionMount wall mount. The MF110 is designed to mount LCD flat panels with VESA (Video Electronics Standards Association)

More information

MantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before

More information

Installation and Assembly: 32" - 60" Flat Panel TV Cart

Installation and Assembly: 32 - 60 Flat Panel TV Cart nstallation and Assembly: 32" - 60" Flat Panel TV Cart Models: SR1M, SR560M R This product is UL Listed. t must be installed by a qualified professional installer. Max UL Load Capacity: 150 lb (68 kg)

More information

MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS

MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Your new Model T28000 Heavy-Duty

More information

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320 INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays The FMA-220 and FMA-320 pivot array allow both horizontal and vertical display pitch adjustment. The pitch adjustment range is 30 (15 up / 15

More information

FSCTD Dual Back to Back Flat Screen Ceiling Mount

FSCTD Dual Back to Back Flat Screen Ceiling Mount Page 1 of 6 FSCTD Dual Back to Back Flat Screen Ceiling Mount The FSCTD Dual Back to Back Flat Screen Ceiling Mount is designed to suspend a monitor from a single flange mounted to structure in the ceiling.

More information

Assembly Instructions for model: VMPR1

Assembly Instructions for model: VMPR1 Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design

More information

Model MSPPWRTW Large Flat Panel Single Arm Wall Mount

Model MSPPWRTW Large Flat Panel Single Arm Wall Mount INSTALLATION INSTRUCTIONS Model Large Flat Panel Single Arm Wall Mount The is wall-mounted, rugged, versatile, and installer-friendly. The mount is compatible with the standard (14 x 14 ) PSB interface

More information

STEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION

STEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions

More information

MM750 Installation Instructions

MM750 Installation Instructions MM750 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on

More information

SPOM1 INSTALLATION INSTRUCTIONS. Medium Flat Panel Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação

SPOM1 INSTALLATION INSTRUCTIONS. Medium Flat Panel Wall Mount. Instrucciones de instalación Installationsanleitung Instruções de Instalação INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d installation Medium Flat Panel

More information

MSP-DCCPGSU Large Screen Static Display Mount

MSP-DCCPGSU Large Screen Static Display Mount INSTALLATION INSTRUCTIONS Large Screen Static Display Mount The Large Screen Static Display Mount () is a quick disconnect mounting solution for large flat panel displays. The mount self-adjusts for the

More information

SAN12 ( <00>)

SAN12 ( <00>) SAN12 (6904-002020 ) Wood 13mm (1/2 in.) 3mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East,

More information

Section 1 Safety working at height

Section 1 Safety working at height Contents Section 1 Safety working at height. Section 2 Hi-Step package contents & parts identification. Section 3 Assembly. Section 4 Operation. Section 5 Maintenance. Section 6 Extender package contents

More information

Stainless Steel Bench Stand

Stainless Steel Bench Stand Installation Manual Stainless Steel Bench Stand Product(s): 29600 29601 51229 2016 by Fairbanks Scales, Inc. Revision 2 02/16 All rights reserved. Amendment Record STAINLESS STEEL BENCH STAND Document

More information

INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series

INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series This Instruction Manual covers most of the F-Series wall and desk mounts, as well as selected F-Series pole mounts. NOTE: Some F-Series

More information

ALF109 Instruction Manual

ALF109 Instruction Manual ALF109 Instruction Manual Scan here to view product demo and install videos or visit san.us/101 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520

More information

Truss Pitch-Adjustable (TPP) Mount

Truss Pitch-Adjustable (TPP) Mount I N S T R U C T I O N M A N U A L Truss Pitch-Adjustable (TPP) Mount The Truss Pitch-Adjustable (TPP) mount is a perfect solution exhibit, retail and digital signage applications. The mount is quick, easy

More information

MEDIUM FLAT PANEL DISPLAY TILT MOUNT MSP-MT (MTR-V)

MEDIUM FLAT PANEL DISPLAY TILT MOUNT MSP-MT (MTR-V) INSTALLATION INSTRUCTIONS MEDIUM FLAT PANEL DISPLAY TILT MOUNT (MTR-V) The tilt mount accommodates medium flat panel displays weighing up to 100 lbs (45.36kgs). The teardrop holes in the mount allow for

More information

table brackets for mki table incl latch TBRA020

table brackets for mki table incl latch TBRA020 table brackets for mki table incl latch TBRA020 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER

More information

Projector Ceiling Mount

Projector Ceiling Mount INSTALLATION MANUAL Projector Ceiling Mount PID:3010 PID:5466 20kg (44lbs) RATED CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! ISSUED: FEB. 2013 NOTE: Read the

More information

SPRINT 5000 BOOKLETMAKER OPERATION MANUAL

SPRINT 5000 BOOKLETMAKER OPERATION MANUAL SPRINT 5000 BOOKLETMAKER OPERATION MANUAL Sprint5000HCS-USA.doc3.doc Page 1 01/05/2002 CONTENTS 1. Introduction. 2 2. Specification. 2 3. Initial setting up. 3 4. Operation. 4 4.1 Loading staples. 5 4.2

More information

Hip Roof Canopy Instructions

Hip Roof Canopy Instructions Hip Roof Canopy Instructions - PUT SAFETY FIRST. NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS MANUAL MAY RESULT IN PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.. Before attempting

More information

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series INSTALLATION INSTRUCTIONS Large Flat Panel Wall Mount Model: PRO-2000 Series PRO-2000 Series Wall Mount Features: Accommodates large flat screens weighing up to 200 lbs (90.7 kg). Mounting brackets adapt

More information

UNIVERSAL STAND. Owner s Manual. Visit us on the web at QUESTION Model No. UT1002

UNIVERSAL STAND. Owner s Manual. Visit us on the web at   QUESTION Model No. UT1002 Owner s Manual Model No. UT1002 UNIVERSAL STAND QUESTION... 1 877 393 7121 Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty.

More information

E4-WM5-Y525A00 MOUNTING INSTRUCTION

E4-WM5-Y525A00 MOUNTING INSTRUCTION RAM 2500/3500 4WD B8 5100 (Dual Steering Damper Kit) The installation of these steering dampers must be performed only by experienced and qualified personnel. Read and follow the installation instructions

More information

Closet Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls

Closet Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls Tools Required: Phillips Screwdriver (#2) Adjustable Wrench Level Tape Measure Utility Knife Electric Drill Drill Bits for Anchors Ladder (4 foot) Models TKA 5 Through TKA 14 Equipped with Footswitch Controls

More information

User Instructions Multiline Otter Scoreboard Caddy Assembly

User Instructions Multiline Otter Scoreboard Caddy Assembly List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)

More information

Series Assembly Instructions

Series Assembly Instructions ComforTrak TM Series Assembly Instructions EP-560, EP-860, EP-960 & EP-970 Models *Inversion Table images may vary slightly from your model. The EP-560 is shown here. BEFORE YOU BEGIN: Review all steps

More information

INSTRUCTION MANUAL DWX723-XE HEAVY-DUTY MITER SAW STAND FINAL PAGE SIZE : 8.5IN X 5.5IN

INSTRUCTION MANUAL DWX723-XE HEAVY-DUTY MITER SAW STAND FINAL PAGE SIZE : 8.5IN X 5.5IN INSTRUCTION MANUAL DWX723-XE HEAVY-DUTY MITER SAW STAND FINAL PAGE SIZE : 8.5IN X 5.5IN DWX723-XE MITER SAW STANDS Components List A. Beam B. DW7231 Miter saw mounting brackets C. Extension arm D. DW7232

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com

More information

PBM-UNI Installation Guide

PBM-UNI Installation Guide 1321 S. State College Blvd., Fullerton, CA 92831 USA Warning Statements Warning Warning Warning THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR (4) TIMES THE WEIGHT OF THE PROJECTOR.

More information

Thank you for purchasing out product! *Please read these instructions and follow them step by step. *

Thank you for purchasing out product! *Please read these instructions and follow them step by step. * Page 1 of 7 AD17 AA DS 4 X 16 T12 Thank you for purchasing out product! *Please read these instructions and follow them step by step. * STEP 1. Slide two support posts (REF. # 24) into the two outside

More information

SR560G SR560M. Flat Panel TV Carts. For 32" to 65" LCD and Plasma Flat Panel Screens. with Glass Shelf. with Metal Shelf

SR560G SR560M. Flat Panel TV Carts. For 32 to 65 LCD and Plasma Flat Panel Screens. with Glass Shelf. with Metal Shelf SR560G with Glass Shelf SR560M with Metal Shelf Flat Panel TV Carts For 32" to 65" LCD and Plasma Flat Panel Screens Peerless SmartMount Flat Panel TV Carts offer the most complete mobile solutions for

More information

TP4463. ASSeMBly INSTruCTIONS FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3

TP4463. ASSeMBly INSTruCTIONS FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3 TP63 FLAT PANEL TV MOUNTING SYSTEM OPTION 1 OPTION 2 OPTION 3 Flat Panel TV Stand Stand with TV Mounting System Stand with Wall Mount ASSeMBly INSTruCTIONS for your safety, please follow these precautions:!

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com

More information

INSTALLATION INSTRUCTIONS Y-Connector Accessory (For Multi-Dual Arm Mounting Systems) Model: KSA-1011

INSTALLATION INSTRUCTIONS Y-Connector Accessory (For Multi-Dual Arm Mounting Systems) Model: KSA-1011 INSTALLATION INSTRUCTIONS Y-Connector Accessory (For Multi-Dual Arm Mounting Systems) Model: KSA-1011 Specifications: Installs to K-Series desk or wall mount. Accommodates K-Series mounting arms (fixed

More information

FitSpine R.E.D. 5YEAR. Inversion Table Assembly Instructions WA R R A N T Y

FitSpine R.E.D. 5YEAR. Inversion Table Assembly Instructions WA R R A N T Y R FitSpine R.E.D. Inversion Table Assembly Instructions TEETER HANG UPS 5YEAR WA R R A N T Y BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion

More information

INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111

INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111 INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111 The GSM-111 static wall mount fits most 23" to 30" displays. The GSM-111 is designed to adapt to VESA 200mm/ 100mm compliant displays.

More information

SAN213 Instruction Manual

SAN213 Instruction Manual SAN213 Instruction Manual Scan here to view product demo and install videos or visit san.us/105 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520

More information

ASSEMBLY OF THE KNOCKED-DOWN LADDERS: 8 to 12 STEPS STANDARD TOP AND SAFELOCK REQUIRED TOOLS

ASSEMBLY OF THE KNOCKED-DOWN LADDERS: 8 to 12 STEPS STANDARD TOP AND SAFELOCK REQUIRED TOOLS ASSEMBLY OF THE KNOCKED-DOWN LADDERS: 8 to 12 STEPS STANDARD TOP AND SAFELOCK REQUIRED TOOLS SAFETY GLASSES 7/16" WRENCH OR SOCKET STEP LADDER OF APPROPRIATE HEIGHT (2) 9/16" WRENCHES OR SOCKETS RUBBER

More information

Assembly Instructions for Model: SD115

Assembly Instructions for Model: SD115 Assembly Instructions for Model: SD115 Thank you for choosing a Sanus Systems desk mount. The SD115 is designed to mount LCD flat panels with a VESA (Video Electronics Standards Association) hole pattern

More information

INSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING

INSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING PLASMA TV WALL MOUNT TILT Universal (RGTU-210) S CAUTION CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION alerts you to the possibility

More information

LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32 with up to 200mm x 200mm VESA Mounting Patterns LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns Multi-position triple pivoting arms allows you to position the monitor

More information

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment. Attachment Tab Height: 16-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

SERVICE MANUAL. SL236 Lift Weld Replacement. Lift Weldment Replacement

SERVICE MANUAL. SL236 Lift Weld Replacement. Lift Weldment Replacement SERVICE MANUAL Lift Weldment Replacement Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description

More information

Range height adjustable assembly

Range height adjustable assembly Table of contents Digital handset operation 3 Height adjustable bench kit 4-5 Cable carrier 6 Ganging tray and ganging rail 7 Height adjustable return frame kit 8 Cable entry pole 9 24 and 30 d worksurfaces

More information

Track Rack. * Track Racks are not lockable

Track Rack. * Track Racks are not lockable The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply

More information

INSTALLATION INSTRUCTIONS POLE/PITCH- ADJUSTABLE MOUNT Model: TPM-2000 SERIES

INSTALLATION INSTRUCTIONS POLE/PITCH- ADJUSTABLE MOUNT Model: TPM-2000 SERIES INSTALLATION INSTRUCTIONS POLE/PITCH- ADJUSTABLE MOUNT Model: TPM-2000 SERIES Specifications: Weight capacity of 150 lbs. (68 kg). Provides tilt range from 5 up to 15 down. Accommodates vertical pole (1"

More information

Supports up to 100 lbs / 45 kg

Supports up to 100 lbs / 45 kg User s Manual Supports up to 100 lbs / 45 kg U-PRO210 Included Mounting Hardware You Will Need 5 & 6 mm hex key 1 U-PRO210 mount (x1) 2 M4, M5 & M6 x 10 bolts (x4) 3 M4, M5 & M6 x 12 bolts (x4) 4 M4, M5

More information

TABLE MKI small with Basin and under rack brackets kit

TABLE MKI small with Basin and under rack brackets kit TABLE MKI small with Basin and under rack brackets kit TBRA024 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO

More information

GB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler

GB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00 Contents Weight Limit... 2 Warning Statements... 2 Installation Tools...

More information

#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS

#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,

More information

Projector Flush Mount

Projector Flush Mount Projector Flush Mount ABtUS SIGAPORE PTE LTD Model: AV819 www.abtussingapore.com Patent Pending Revision 21/05/2012 ABtUS SINGAPORE PTE LTD www.abtussingapore.com User Operation Guide IMPORTANT NOTES Thank

More information

Installation Instructions

Installation Instructions Articulating Dual Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied

More information

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair

More information

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32 with up to 200mm x 200mm VESA Mounting Patterns Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60

More information

QLF215 INSTRUCTION MANUAL

QLF215 INSTRUCTION MANUAL QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

More information

Flat Panel Mobile Cart and Accessories

Flat Panel Mobile Cart and Accessories INSTALLATION MANUAL Flat Panel Mobile Cart and Accessories Optional Accessories TCH01 TDV01 TLP01 TCR01 Note: The accessories are not standard. The accessories will be selected according to user requirement.

More information

Articulating TV/Monitor Grommet/Clamp Desk Mount Model: DE300S (Butterfly Series)

Articulating TV/Monitor Grommet/Clamp Desk Mount Model: DE300S (Butterfly Series) t Articulating TV/Monitor Grommet/Clamp Desk Mount Model: DE300S (Butterfly Series) Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct

More information

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine The purpose of this guide is to: 1. Describe mounting of Counterweight (page 2). 2. Describe

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700

More information

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /

More information

LC200WT Security Wall Mount with Tilt for up to 32" Flat Screens

LC200WT Security Wall Mount with Tilt for up to 32 Flat Screens Page 1 of 6 The LC200WT Security Wall Mount with Tilt is designed to secure up to a 32" flat panel monitor to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front

More information

Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays

Installation and Assembly: Flat Video Wall Mount For 40 to 65 Flat Panel Displays Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read

More information

Select Lab Adjustable Height Workstation

Select Lab Adjustable Height Workstation Assembly Instructions Select Lab Adjustable Height Workstation Mobile version is shown. Also available without casters. Contents Important User Information.............................. 2 Safety Precautions....................................

More information

Articulating TV/Monitor Wall Mount Model: WA300S (Butterfly Series)

Articulating TV/Monitor Wall Mount Model: WA300S (Butterfly Series) P Articulating TV/Monitor Wall Mount Model: WA300S (Butterfly Series) Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information

More information

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.

Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment. 2005-08 Pontiac G6 GT Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed

More information

ASSEMBLY AND ADJUSTMENT

ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and

More information

MODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17

MODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 MODEL T128 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 For questions or help with this product contact Tech Support at (570) 56-966 or techsupport@grizzly.com Introduction The Model T128

More information

Select Lab Fixed Height Workstation

Select Lab Fixed Height Workstation Assembly Instructions Select Lab Fixed Height Workstation Contents Important User Information.............................. 2 Safety Precautions.................................... 3 Required Tools........................................

More information

AM95 Installation Guide

AM95 Installation Guide 1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components: Maximum Flat Panel Weight: 95 lb. / 43.1 kg. M4 X 25mm M5 X 25mm M6 X 12mm (Qty 2) M6 X 25mm M8 X 25mm Allen Key Plastic Cover

More information

Mobile TV Cart Instruction Manual SKU: STAND-TV03E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv03e

More information

SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL

SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL SM-RAZOR-ART2-L / SM-RAZOR-ART2-XL Strong Razor Series Articulating Mount for Large and Extra Large Displays INSTRUCTION MANUAL Installation Manual Warnings: Installation of this product should be done

More information

LCD MONITOR/TV WALL MOUNT

LCD MONITOR/TV WALL MOUNT INSTALLATION INSTRUCTIONS LCD MONITOR/TV WALL MOUNT DUAL DESK CLAMP (RFCD-110) S CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION

More information

The Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )

The Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 ) P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your

More information

INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800

INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800 INSTALLATION INSTRUCTIONS Lateral Shift Accessory Model: PAC-800 The PAC-800 Lateral Shift Accessory is for use with Chief Model PSM, PST, PRO, PLP, Large Flat Panel Display wall mounts. It can be installed

More information

FCA800/801 INSTALLATION INSTRUCTIONS. Fusion Large Above/Below Accessory Shelf

FCA800/801 INSTALLATION INSTRUCTIONS. Fusion Large Above/Below Accessory Shelf INSTALLATION INSTRUCTIONS Above Cart/Ceiling Above Wall (FCA801 shown) Below Cart/Ceiling Below Wall Fusion Large Above/Below Accessory Shelf Spanish Product Description German Product Description Portuguese

More information

WB Fastener Kit (ONLY available with G5W & G5W-PRO Models)

WB Fastener Kit (ONLY available with G5W & G5W-PRO Models) Thank you for purchasing a Pro LIFT G5. The Pro LIFT product line is designed to enhance your interactive whiteboards and projectors or LCD. Please follow all assembly instructions correctly to provide

More information

INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500

INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500 INSTALLATION INSTRUCTIONS LARGE FLAT PANEL IN WALL ENCLOSURE Model: PAC-500 Specifications: Designed for in-wall installation spanning a minimum of 3 wood studs, 16" on center. Accomodates MWR, PWR and

More information

3 wide x 3 deep Video Wall Display Installation Guide

3 wide x 3 deep Video Wall Display Installation Guide HoverTrack Series 3 wide x 3 deep Video Wall Display Installation Guide VWD-3X3-X462 This display kit mounts NEC X461UN and X462UNS LCD monitors in a 3 wide by 3 deep landscape configuration. The frame

More information

INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1

INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 IMPORTANT! : The MSP-S11 Mount is designed for use with Sharp 45" LCD displays that have a 200mm x 200mm mounting pattern. IMPORTANT! : The mount

More information

ASSEMBLY INSTRUCTIONS TALL CABINET - MODEL CS30

ASSEMBLY INSTRUCTIONS TALL CABINET - MODEL CS30 ASSEMLY INSTRUCTIONS TALL CAINET - MOEL CS30 To avoid SERIOUS INJURY or AMAGE to personal belongings: O NOT overload the cabinet or the shelves, maximum weight limit for feet or caster installation is

More information

Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays

Installation and Assembly: Articulating Swivel Arm for 37 - 60 Flat Panel Displays Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502

More information

P4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels

P4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE

More information

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation

More information

INSTALLATION INSTRUCTIONS MSP-SPFB (PFB-2000S) Plasma Floor Stand

INSTALLATION INSTRUCTIONS MSP-SPFB (PFB-2000S) Plasma Floor Stand INSTALLATION INSTRUCTIONS MSP-SPFB (PFB-2000S) Plasma Floor Stand Chief s Plasma Floor Stand is a safe, stable, easy-toinstall modular design solution for digital signage and presentations. Ideal where

More information