Phone #: (360) Online Tech Support: Web: Inventory

Size: px
Start display at page:

Download "Phone #: (360) Online Tech Support: Web: Inventory"

Transcription

1 WM1104 Router Bit Display Cabinet Instruction Sheet Phone #: (360) Online Tech Support: Web: Shipment 1 Inventory Shipment 1: Cabinet... 1 Plexiglass Door... 1 Plexiglass Door w/lock... 1 Keys (ship between styrofoam boards)... 2 Box Figure 1. Router display shipping carton. Lock Box 1 Keys Figure 3. Shipping location of box 1 and keys. Figure 2. Plexiglass door panels with pre-installed lock. #15014KN COPYRIGHT MAY, 2012 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China

2 Long Wire Pegs Sign Base Assembly Short Wire Pegs Box 1 (Inside Shipment 1, Figures 4 5): Sign Base Assembly... 1 Long Wire Pegs Short Wire Pegs Double Ended Connectors... 8 Single Ended Connectors... 8 Sign Panel... 1 Box Box 2 Connectors Display Panel Figure 4. Box 1 contents. Double-Ended Connector Single-Ended Connector Figure 5. Types of connectors. Wall Brackets Hardware Wide Mounting Brackets Hex Wrench 5mm Feet M x 14 Mounting Brackets Box 2 (Inside Box 1, Figure 6): Wall Brackets... 2 Wide Mounting Brackets... 2 Narrow Mounting Brackets... 2 Hex Wrench 5mm... 1 Feet M x Hardware Button Head Cap Screws M x Phillips Screws M6-1 x Flat Head Screws M5-.8 x Figure 6. Box 2 contents. -2-

3 Assembly The Router Display Cabinet can be assembled in various configurations and may be stood on the floor or mounted to the wall. Two cabinets may be stacked and the sign base assembly can serve as either a base foot or a marquee. The assembly instructions that follow are for a stacked floor display. Bottom Top Figure 7. Cabinet orientation. Button Head Cap Screw Note: The top and bottom of the cabinet can be identified by the pre-installed door mounting rails. The bottom of the cabinet has a narrower, doubleslider rail. The top has a wider double-channel rail (see Figure 7). To assemble the cabinet, do these steps: 1. Install (4) double-ended connectors to the bottom of the cabinet using (4) M x 14 button head cap screws (see Figure 8). Double-Ended Connectors Double-Ended Connector Figure 8. Double ended connectors installed in bottom of cabinet. 2. Install the sign base assembly on the cabinet bottom (see FIgure 9). NOTE: As with all sheet metal parts, the flexible nature of the material means that mounting holes may not align without applying additional force to the components. This is normal. However, often additional force is unnecessary if you just hand-tighten fasteners during initial assembly, then come back and final-tighten them with a wrench once all components are installed. Figure 9. Install sign base assembly on bottom of cabinet. -3-

4 3. Secure the sign base assembly using (4) M x 14 button head cap screws, as shown in Figure 10. Figure 10. Securing sign base assembly to cabinet. 4. Install (4) single-ended connectors and secure with (4) M x 14 button head cap screws, as shown in Figure 11. Figure 11. Securing single-ended connectors. 5. Thread the feet into the single-ended connectors, as shown in Figure 12. Figure 12. Threading foot into single-ended connector. -4-

5 6. With the help of another person, stand the case upright (see Figure 13). 7. Adjust the leveling feet so the cabinet does not rock in any direction and is level. Figure 13. Sign base assembly and cabinet standing. 8. Attach the display panel to the sign base assembly with (4) M5-.8 x 8 flat head screws, as shown in Figure 14. Figure 14. Attaching display panel to sign base assembly. -5-

6 Runner 9. Slide the door panel (without lock) into the rear channel and slightly flex the plexiglass to seat the runner on the rear rail (see Figure 15). Rear Rail NOTE: Orient the door panel so the lockpin hole is on the lower left side of the door. Lock Pin Hole Figure 15. Right door panel installed. 10. Slide the door panel with the lock into front channel groove and slightly flex the plexiglass to seat the runner on the front rail (see Figure 16). NOTE: Install the left door panel so the lock-pin lines up with the lock-pin hole. Figure 16. Left door panel with lock installed. -6-

7 11. Lock the cabinet by depressing the spring action on the lock and removing the key when it is horizontal in the lock. We recommend placing and securing the cabinet in its intended location before installing wire hangers or product. This reduces the weight and saves time. Tip: The included wire pegs come in two sizes. We recommend the shorter size be situated towards top of the cabinet. This makes hanging stock more convenient. Figure 17. Cabinet assembly completed. Stacking Cabinets This display cabinet can be stacked with another unit to display more product. To stack cabinets, do these steps: 1. Invert and install the sign base assembly on the top of the second cabinet to act as a sign marquee. 2. With the help of another person, lift the second cabinet onto the completed cabinet and secure it with (4) M x 14 button head cap screws, as shown in Figure 18. Figure 18. Installing double-ended connector and securing top cabinet in place. 3. Install the plexiglass doors as detailed in Steps 8 9 on Page

8 Cleat Mounted to Stud Mounting Bracket Engaging Wall Mount Bracket M6-1 x 25 Phillips Screw Wall Bracket Secured to Cleat Lag Screw Into Cleat (1 of 2) Figure 19. Cut-away view of mounting bracket and wall mount installation on cabinet. Mounting Cabinets The display cabinet is HEAVY. When mounting it to the wall, ensure that all fasteners are properly seated in wall studs/masonry. Failure to do so could lead to the cabinet falling, resulting in serious crushing injury and property damage. The display cabinet can be hung on the wall or placed on a floor. In either case, we recommend securing the cabinet to a wall or fixed surface to prevent tipping. Phillips Screws Mounting Bracket To secure the cabinet to the wall, do these steps: 1. Install either the (2) wide or narrow mounting brackets on the case using (4) M6-1 x 25 Phillips screws, as illustrated in Figure Note: The wall mounting brackets must be secured to a stud or to a cleat that is mounted to a stud in order to provide a secure mount for the cabinet. Figure 20. Inside and outside view of narrow mounting bracket installed on cabinet. Anchor Lag Shield 2. Using the appropriate hardware for your situation (see Figure 21 for common examples), secure the (2) wall mounting brackets to the wall. 3. With assistance, either lift or slide the display cabinet into place so the mounting bracket engages the wall mounting bracket. Lag Screw 4. Congratulations, the cabinet is now assembled, mounted, and ready to display stock. Figure 21. Example of masonry and stud wall mounting hardware. -8-

Model D3348 Extension Block Kit Instruction Sheet

Model D3348 Extension Block Kit Instruction Sheet INTRODUCTION Model D3348 Extension Block Kit Instruction Sheet Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz This Extension Block Kit increases the maximum

More information

Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV

Showpiece Cabinet Integrated Stand For 32 - 52 LCD HDTV Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV

More information

Box Track INSTALLATION INSTRUCTIONS

Box Track INSTALLATION INSTRUCTIONS Box Track INSTALLATION INSTRUCTIONS BOX TRACK Recommended Tools Level Tape Measure Pencil Drill with 1/8, and 1/4, Drill Bits, Phillips Bit and Slotted Bit Socket Wrench with 9/16 Socket 9/16 and 5/8 Wrench

More information

Phone #: (360) Online Tech Support: Web:

Phone #: (360) Online Tech Support: Web: Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz Your new Model D2058A Super-Heavy Duty Mobile Base () is designed to give you a stable and mobile platform upon

More information

Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth

Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth 88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great

More information

Media Storage Systems Fixed Media Cabinets

Media Storage Systems Fixed Media Cabinets Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3

More information

MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS

MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Your new Model T28000 Heavy-Duty

More information

Assembly Instructions for model: VMPR1

Assembly Instructions for model: VMPR1 Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design

More information

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42-55 Page 20 SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management

More information

MODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17

MODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 MODEL T128 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 For questions or help with this product contact Tech Support at (570) 56-966 or techsupport@grizzly.com Introduction The Model T128

More information

Heavy Duty I-Beam Trolley

Heavy Duty I-Beam Trolley Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM

More information

Cabinet Storage Products

Cabinet Storage Products Assembly Instructions Storage Products (UltraStor, Acoustis, Adjustable Shelf, Cover Panels, Closure Panels) Wood Compartment Doors Full Wood Door Compartment Grille Doors Full Grille Door No Doors Contents

More information

LOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page

LOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page LOFT DOOR HANGER Page 1 Specifications 2 7/16" 3/8" 1-1/2 1-3/4 Ø3 3 7/8" 11-1/16 Page 2 Parts and Tools Tools Needed Tape Measure Pencil Drill with 1/8, 1/4 and 3/8 bits, 1 spade bit and Phillips bit

More information

ALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL

ALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL ALUMA-CLASSIC FENCE W1716 & W1720 INSTRUCTION MANUAL Phone: Phone: 1-360-734-3482 On-Line On-Line Technical Technical Support: Support: tech-support@woodstockint.com tech-support@shopfox.biz COPYRIGHT

More information

User Instructions Multiline Otter Scoreboard Caddy Assembly

User Instructions Multiline Otter Scoreboard Caddy Assembly List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)

More information

Heavy-Duty Bypass Track System

Heavy-Duty Bypass Track System Heavy-Duty Bypass Track System Please Note: This track system must be installed with the screws going into a solid surface such as studs or a header. Due to the spacing of the holes on these Brackets,

More information

PROFILE Flat Panel Console System Installation Manual

PROFILE Flat Panel Console System Installation Manual PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double

More information

Assembly Instructions Signature Choral Riser 4-Step Model

Assembly Instructions Signature Choral Riser 4-Step Model Assembly Instructions Signature Choral Riser 4-Step Model Contents Important User Information...........................2 General...2 Manufacturer...2 Intended Use...2 Warranty...2 Safety Precautions.................................3

More information

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at

Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at 1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel

More information

Assembly Instructions Music Library System

Assembly Instructions Music Library System Assembly Instructions Music Library System 7-Shelf Unit is shown. 6-Shelf Unit assembly is the same except where noted. Contents Important User Information...........................2 General...2 Manufacturer...2

More information

ETX Powered Loudspeaker Accessories

ETX Powered Loudspeaker Accessories ETX Powered Loudspeaker Accessories ETX-BRKT10, ETX-BRKT12, ETX-BRKT15, ETX-TCA-S, ETX-TCA-L, and ETX-BRKT35 en Installation Guide en 3 Table of contents 1 Safety 4 2 Installation 6 2.1 Wall mount bracket

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with

More information

Colonial Classic Bar

Colonial Classic Bar 88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.

More information

Xceed ASSEMBLY MANUAL

Xceed ASSEMBLY MANUAL Xceed ASSEMBLY MANUAL Table of Contents / Registration Congratulations on your commitment to fitness and your purchase of the Bowflex Xceed home gym. Before assembling your Bowflex Xceed home gym please

More information

Mighty Mo GX Series Cabinet Installation Guide. OR Rev /11

Mighty Mo GX Series Cabinet Installation Guide. OR Rev /11 Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating

More information

GETTING STARTED. Instructions IMPORTANT PS B PS B. Record the serial number from the tag on the door front.

GETTING STARTED. Instructions IMPORTANT PS B PS B. Record the serial number from the tag on the door front. PS-15-20-B IMPORTANT Instructions Record the serial number from the tag on the door front. Keep keys in a secure place away from children. DO NOT STORE KEYS INSIDE SAFE GETTING STARTED When you first receive

More information

Assembly and installation help

Assembly and installation help Assembly and installation help A supplement to the directions The Purpose of this tutorial is to expand (not replace) upon the directions that come with the system and to help provide shortcuts, the first

More information

Signature Choral Riser Side Rail

Signature Choral Riser Side Rail Assembly/Owner s Manual Signature Choral Riser Side Rail Signature Choral 3-Step Riser with Optional Side Rail Signature Choral 4-Step Riser with Optional Side Rail CONTENTS Visit the Signature Choral

More information

ASSEMBLY INSTRUCTIONS MANUAL

ASSEMBLY INSTRUCTIONS MANUAL PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)

More information

Vigilant Cigar Humidor Vault. Assembly Instructions

Vigilant Cigar Humidor Vault. Assembly Instructions Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly

More information

The Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )

The Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 ) P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your

More information

MODEL T1248/T1249 HEAVY-DUTY BEECH WORKBENCH INSTRUCTIONS

MODEL T1248/T1249 HEAVY-DUTY BEECH WORKBENCH INSTRUCTIONS MODEL T14/T14 HEAVY-DUTY BEECH WORKBENCH INSTRUCTIONS For questions or help with this product contact Tech Support at (0) 4- or techsupport@grizzly.com Introduction These workbenches are designed to be

More information

Mount to the Wall INSTALLATION MANUAL

Mount to the Wall INSTALLATION MANUAL Mount to the Wall 15 Locate the Wooden Studs This step applies to wooden stud wall installation only. Determine and mark the exact locations of two stud centers on the wall. Wooden studs should be spaced

More information

GearBoss AirPro Locker

GearBoss AirPro Locker Installation and Owner s Instructions GearBoss AirPro Locker Wall Installation Island Installation Contents Important User Information...........................2 General...2 Manufacturer...2 Intended

More information

MODEL T " X 72" BEECH CABINETMAKER'S WORKBENCH INSTRUCTIONS

MODEL T  X 72 BEECH CABINETMAKER'S WORKBENCH INSTRUCTIONS MODEL T1251 25" X 72" BEECH CABINETMAKER'S WORKBENCH INSTRUCTIONS For questions or help with this product contact Tech at (570) 546-663 or techsupport@grizzly.com Introduction This cabinetmaker's workbench

More information

Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch

Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch 88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have

More information

a.k.a. casegoods instructions

a.k.a. casegoods instructions a.k.a. casegoods instructions a a.k.a. workwall installation IMPORTANT NOTES Failure to install product according to installation instruction will result in loss of warranty. Tools required for assembly

More information

MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS

MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible

More information

ROCKWELL. Two Panel Door. Half X Door. Double X Door. Z Combination Door

ROCKWELL. Two Panel Door. Half X Door. Double X Door. Z Combination Door ROCKWELL 4 in 1 DOOR Choose between four door styles with this Door Kit. Our versatile Rockwell Door Kit is very easy to assemble. All materials and hardware needed to assemble any of the four styles are

More information

Queen Wingback Bed King Wingback Bed

Queen Wingback Bed King Wingback Bed Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock

More information

Pillar Hanger ASSEMBLY INSTRUCTIONS

Pillar Hanger ASSEMBLY INSTRUCTIONS Pillar Hanger ASSEMBLY INSTRUCTIONS PILLAR HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket

More information

INS T A L L A TIO N INS T R U C TIO N S. Ceiling Mount Track System

INS T A L L A TIO N INS T R U C TIO N S. Ceiling Mount Track System Ceiling Mount Track System 10.26.2016 Specifications Ceiling Post: Unassembled 2-7/8 Assembled 1-11/16 7/8 7-9/16 5-7/8 3/8 2 Tubes 1/2 2-3/8 5 Parts and Tools Tools Needed Tape Measure Pencil Drill with

More information

Office Partitions WARNING. Assembly Instructions. Customer Service A S S E M B LY HARDWARE H1 H2 H3 H4 H5 H8 H9 H10 H11 H12

Office Partitions WARNING. Assembly Instructions. Customer Service A S S E M B LY HARDWARE H1 H2 H3 H4 H5 H8 H9 H10 H11 H12 Customer Service 1-800-645-2986 Assembly Instructions WARNING In order to prevent structural failure, instability, t i p - o v e r, and/or serious injury, please follow i n s t ructions care f u l l y.

More information

Homestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s

Homestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s 88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.

More information

Rockwell 4-in-1 Sliding Door

Rockwell 4-in-1 Sliding Door Rockwell 4-in-1 Sliding Door ASSEMBLY INSTRUCTIONS ROCKWELL 4-IN-1 SLIDING DOOR Recommended Tools Drill with Phillips Bit Socket Wrench with 7/16 Socket Rubber Mallet Adjustable Square ROCKWELL 4-IN-1

More information

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320 INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays The FMA-220 and FMA-320 pivot array allow both horizontal and vertical display pitch adjustment. The pitch adjustment range is 30 (15 up / 15

More information

MODEL T TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17)

MODEL T TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17) MODEL T1241 20-TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17) For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Identification

More information

Worktop INDEX eight Capacity Unpacking

Worktop INDEX eight Capacity Unpacking Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of

More information

DRAWER Mitsubishi pajero lwb

DRAWER Mitsubishi pajero lwb DRAWER Mitsubishi pajero lwb SSDS601 / SSMP001 INSTALL TIME: 45 mins Thank you for purchasing a Front Runner Storage System. This Storage System is made up of the following components: 1. A Drawer System

More information

Wall Mount Assembly and Mounting Guide (55 /84 )

Wall Mount Assembly and Mounting Guide (55 /84 ) Microsoft Surface Hub Wall Mount Assembly and Mounting Guide (55 /84 ) For mounting on a wall with wood studs These instructions assume wood-stud wall construction with 2-by-4 studs spaced 16 inches apart,

More information

IDR assembly instructions:

IDR assembly instructions: IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)

More information

Star Trac Turbo Trainer Assembly & Setup

Star Trac Turbo Trainer Assembly & Setup Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is

More information

Top Mount Ultra Modern Hanger

Top Mount Ultra Modern Hanger Top Mount Ultra Modern Hanger ASSEMBLY INSTRUCTIONS TOP MOUNT ULTRA MODERN HANGER Recommended Tools Level Tape Measure Pencil Drill with 1/8, and 1/4, Drill Bits and Phillips Bit Socket Wrench with 9/16

More information

SHELTON THERMOSTATIC SHOWER PANEL

SHELTON THERMOSTATIC SHOWER PANEL SKU(s): 413241 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor,

More information

4 BAY Low Profile WALL MOUNT CABINET

4 BAY Low Profile WALL MOUNT CABINET D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier

More information

Spring Loaded All Season Roll-Up Doors

Spring Loaded All Season Roll-Up Doors Spring Loaded All Season Roll-Up Doors STAND-OFF MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately

More information

INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1

INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 IMPORTANT! : The MSP-S11 Mount is designed for use with Sharp 45" LCD displays that have a 200mm x 200mm mounting pattern. IMPORTANT! : The mount

More information

MPA-9000 Universal Ceiling Projector Mount Kit

MPA-9000 Universal Ceiling Projector Mount Kit I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low

More information

INSTRUCTION SHEET. PIECE INVENTORY - MOBILE BASES Refer to the diagram for part identification.

INSTRUCTION SHEET. PIECE INVENTORY - MOBILE BASES Refer to the diagram for part identification. INSTRUCTION SHEET D2260 HEAVY-DUTY MINI-MOBILE BASE D2057 HEAVY-DUTY MOBILE BASE D2058 SUPER HEAVY-DUTY MOBILE BASE D2259 EXTENSION KIT FOR D2260/D2057 D2246 EXTENSION RAIL KIT FOR D2058 This Shop Fox

More information

TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF

TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF TITAN INDUSTRIAL RACK 4-FOOT TALL / 3-SHELF DXST4500 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS TECHNICAL

More information

Stag Hanger ASSEMBLY INSTRUCTIONS

Stag Hanger ASSEMBLY INSTRUCTIONS Stag Hanger ASSEMBLY INSTRUCTIONS STAG HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket Wrench

More information

WARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE

WARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE MARCELINE TWIN OVER TWIN BUNK BED INSTRUCTIONS Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, California 91752 rhbabyandchild.com Distributed in Canada

More information

Read Below! Read Below! Read Below! Read Below! Read Below! Read Below! STOP READ TIPS BELOW TO MAKE ASSEMBLY MUCH EASIER

Read Below! Read Below! Read Below! Read Below! Read Below! Read Below! STOP READ TIPS BELOW TO MAKE ASSEMBLY MUCH EASIER Read Below! Read Below! Read Below! Read Below! Read Below! Read Below! STOP READ TIPS BELOW TO MAKE ASSEMBLY MUCH EASIER Here are some guidelines to help make assembling your unit much easier: -Read and

More information

Important Loading Information. Tools Required. Meridian Lateral Files Instructions

Important Loading Information. Tools Required. Meridian Lateral Files Instructions Y Meridian Lateral Files Instructions! WARNING Failure to observe stated capacities below will result in unsafe usage conditions, causing possible product damage or personal injury. Important Loading Information

More information

INS T A L L A TIO N INS T R U C TIO N S HORSESHOE W/ BAR HANGER

INS T A L L A TIO N INS T R U C TIO N S HORSESHOE W/ BAR HANGER INS T A L L A TIO N INS T R U C TIO N S HORSESHOE W/ BAR HANGER 6-1/2" 5" 2-7/16" 3-7/16" Ø2-7/8" 4-7/8" 11" 2" 3/16" 1/2" HORSESHOE W/ BAR S P ECIFICATIONS PARTS AND TOOLS Tools Needed Tape Measure Pencil

More information

Spoked GARRICK HANGER

Spoked GARRICK HANGER Spoked GARRICK HANGER ASSEMBLY INSTRUCTIONS SPOKED GARRICK HANGER Recommended Tools Drill with 1/8 and 1/4 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench

More information

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS

FLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair

More information

Contour Hanger ASSEMBLY INSTRUCTIONS

Contour Hanger ASSEMBLY INSTRUCTIONS Contour Hanger ASSEMBLY INSTRUCTIONS CONTOUR HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket

More information

Industrial Hanger ASSEMBLY INSTRUCTIONS

Industrial Hanger ASSEMBLY INSTRUCTIONS Industrial Hanger ASSEMBLY INSTRUCTIONS INDUSTRIAL HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench

More information

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS

More information

3 wide x 3 deep Video Wall Display Installation Guide

3 wide x 3 deep Video Wall Display Installation Guide HoverTrack Series 3 wide x 3 deep Video Wall Display Installation Guide VWD-3X3-X462 This display kit mounts NEC X461UN and X462UNS LCD monitors in a 3 wide by 3 deep landscape configuration. The frame

More information

Modern Gatherings 60" TV Console Assembly Instructions

Modern Gatherings 60 TV Console Assembly Instructions Parts List Page 1 of 6 No. Description Sketch Quantity A Console 1 B Door 1 Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have

More information

Pleated Shades with Corded Top Down / Bottom Up Option

Pleated Shades with Corded Top Down / Bottom Up Option Pleated Shades with Corded Top Down / Bottom Up Option Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing Pleated

More information

Jenny Legs Assembly Instructions

Jenny Legs Assembly Instructions Jenny Legs Assembly Instructions R EXTENDED PHILLIPS BIT MM ALLEN WRENCH 6MM HEX DRIVE /" 007 Steelcase Inc. Grand Rapids, MI 90 U.S.A. Printed in U.S.A. Page of 6 88000 Rev F Jenny Club Instructions:

More information

WAREHOUSE HANGER INSTALLATION INSTRUCTIONS R H INS T A L L A TIO N INS T R U C TIO N S

WAREHOUSE HANGER INSTALLATION INSTRUCTIONS R H INS T A L L A TIO N INS T R U C TIO N S INS T A L L A TIO N INS T R U C TIO N S WAREHOUSE HANGER NOTE: Due to the size and weight of the Warehouse Hanger it is recommended that this Hanger be installed on 3 4 or wider doors. 10.11.2016 2-3/16"

More information

INSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S THE MAVERICK HANGER R H

INSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S THE MAVERICK HANGER R H INS T A L L A TIO N INS T R U C TIO N S THE MAVERICK HANGER 10.6.2016 PARTS INSTALLATION SPECIFICATIONS AND TOOLS INSTRUCTIONS 2-1/4" 2-7/8 11-3/8" 1/4" 2-1/8 PARTS INSTALLATION AND INSTRUCTIONS TOOLS

More information

Assembly Instructions for Model: VMPR1

Assembly Instructions for Model: VMPR1 Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP

More information

COPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX Standard Release A March 2008

COPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX Standard Release A March 2008 COPPER / FIBER MANAGER RACK INSTALLATION INSTRUCTIONS PX101425 Standard Release A March 2008 A UPON RECEIPT OF YOUR Copper / Fiber Manager Rack Great care has been taken to insure that your Copper / Fiber

More information

V00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID

V00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID Net-Verse D-Type Cabinets Tool List 10mm Socket Wrench 122mm (48 ) Level 19mm Wrench 8mm Hex Drive T25 Torx driver Net-Verse D-Type

More information

CAELI THERMOSTATIC SHOWER PANEL

CAELI THERMOSTATIC SHOWER PANEL SKU(s): 300280 CAELI THERMOSTATIC SHOWER PANEL BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for

More information

L.L.Bean. Wooden Slat Bed

L.L.Bean. Wooden Slat Bed L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step

More information

Ripple Hanger ASSEMBLY INSTRUCTIONS

Ripple Hanger ASSEMBLY INSTRUCTIONS Ripple Hanger ASSEMBLY INSTRUCTIONS RIPPLE HANGER Recommended Tools Drill with 1/8, 1/4, and 1/2 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket

More information

Assembly Instructions

Assembly Instructions Selling Station Assembly Instructions View from above without top A B C D Rounded finished corners on A & D Square unfinished 3-sides on B & C Selling Station Components (2) 2' x 6' Side s Have a channel

More information

Original Gallery System

Original Gallery System GAllery System Art Displays Original Gallery System a Gallery System product Here s everything you need to know to get started with your Gallery System Art Hanging System GS getting started To install

More information

INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111

INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111 INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount Model: GSM-111 The GSM-111 static wall mount fits most 23" to 30" displays. The GSM-111 is designed to adapt to VESA 200mm/ 100mm compliant displays.

More information

TWIG Hanger ASSEMBLY INSTRUCTIONS

TWIG Hanger ASSEMBLY INSTRUCTIONS TWIG Hanger ASSEMBLY INSTRUCTIONS TWIG HANGER Recommended Tools Drill with 1/8, 1/4, and 3/8 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16 and 5/8 Combination Wrench Socket Wrench

More information

Cellar Hanger ASSEMBLY INSTRUCTIONS

Cellar Hanger ASSEMBLY INSTRUCTIONS Cellar Hanger ASSEMBLY INSTRUCTIONS CELLAR HANGER Recommended Tools Drill with 1/8 and 1/4 Drill Bits, 1-1/8 Forstner Bit or 1-1/8 Spade Bit, and Phillips Bit 9/16, 7/16, and 5/8 Combination Wrench Socket

More information

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written

More information

TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF

TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF TITAN INDUSTRIAL RACK 6-FOOT TALL / 4-SHELF DXST10000 IMPORTANT: Please read this manual carefully before assembling this storage rack and save it for reference INSTRUCTION MANUAL 3 TABLE OF CONTENTS

More information

Nantucket Buffet

Nantucket Buffet 88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We

More information

TABLE MKI small with Basin and under rack brackets kit

TABLE MKI small with Basin and under rack brackets kit TABLE MKI small with Basin and under rack brackets kit TBRA024 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO

More information

Parts list. Model:10400

Parts list. Model:10400 Manufacturing, Inc. Instruction sheet -- VTI Flat panel TV cart with cabinet Model number: 10400 Congratulations for having chosen this excellent VTI product. To assure your complete satisfaction, this

More information

BIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.

BIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers. 1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat

More information

WireCrafters, LLC. General Information

WireCrafters, LLC. General Information WireCrafters, LLC. General Information 6208 Strawberry Lane 502/363-6691 www.wirecrafters.com Louisville, Kentucky 40214 502/361-3857 FAX 1-800-626-1816 The following General Installation Instructions

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

INSTALLATION MANUAL PBL-UMP

INSTALLATION MANUAL PBL-UMP INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...

More information

Wenger Corporation 2013 Printed in USA 08/13 Part #240B Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota

Wenger Corporation 2013 Printed in USA 08/13 Part #240B Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota Assembly Instructions SportCart CONTENTS Important User Information...2 General...2 Manufacturer...2 Installation...2 Intended Use...2 Warranty...2 Safety............................................3 General...3

More information

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS The Universal Interface Bracket provides a solution for simplifying inventory of RPA and RPM series mounts and SLB/SLM projector brackets.

More information

EmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY

EmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B

More information

EKX Full-Range Loudspeaker Accessories

EKX Full-Range Loudspeaker Accessories EKX Full-Range Loudspeaker Accessories EKX-BRKT12, EKX-BRKT15, and EKX-TCA en Installation Note en 3 Table of contents 1 Safety 4 1.1 Safety point 6 2 Installation 7 2.1 Wall mount bracket 7 2.2 Truss

More information