Assembly Instructions 10x12 Woven Post Gazebo Model: L-GZ1033PST SKU:

Transcription

1 Assembly Instructions 10x12 Woven Post Gazebo Model: L-GZ1033PST SKU:

2 Congratulations on your purchase of our SUNJOY 10x12 Woven Post Gazebo. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. IMPORTANT: 1. When installing and assembling your gazebo, it is recommended that two or more adults are involved. 2. Do not use the gazebo during an electrical storm, as there is a remote chance of getting struck by lightning. 3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death. 4. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the structure. 5. Do not use lanterns that contain open flames. 6. This package contains small items and plastic bags that should be kept away from children. 7. Ensure that all s & poles are firmly secured in position fully. It is important to do so before use so as to avoid collapsing or damage to the item, which could result in injury. 8. KEEP ALL FLAME AWAY FROM THIS SHELTER FABRIC. The fabric may burn if it is exposed to prolonged contact with a flame source. The application of any foreign substance to the fabric may render the flame-resistant properties ineffective. USE & CARE: 1. This gazebo is not a permanent structure. The canopy top should never be left on during periods of extended or heavy rain nor any inclement weather where high winds or wind gusts can occur. If left up, damage to the gazebo and surroundings can occur. 2. Do not repack your gazebo until completely dry. 3. Steel components for garden accessories and furniture are treated with rust inhibiting paint that protects them from rust. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched. This is a natural process. To minimize this condition, it is recommended that care be taken when assembling and handling the product in order to prevent the paint from being scratched. Surface rust can be removed easily using a very light application of common cooking oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the oxidation may start dripping onto the deck or patio, which may cause damaging stains that may be difficult to remove.

3 Parts List Post A 4 Long left beam B1 2 Long right beam B2 2 Short left beam C1 2 Short right beam Beam up Beam down Decorative ferrule C2 2 D1 4 D2 4 E 4 Arch support F 8 Long netting pipe Short netting pipe Oblique beam down side Middle beam down side G 4 H 4 I 4 J 4 Oblique beam K 4 Oblique beam down side Long middle beam Short middle beam Big top Small top oblique beam L 4 M 2 N 2 O 1 P 4

4 Small top Q 1 Stake cover R 4 Stake plate S 4 Hook T 1 Small canopy U 1 Big canopy V 1 Netting W 1 Hardware Pack 1 AA M6*15 Flat bolt 16 PCS BB M6 Washer 128 PCS CC M6*25 Hex bolt 48 PCS DD M6*70 Hex bolt 16 PCS EE M6 Nut 16 PCS FF M6*40 Hex bolt 32 PCS Z M6 Wrench 1 PCS

5 Fig.1: Insert the Stake cover (R) into the post (A) from bottom, then use bolt (AA) and washer (BB) to fasten it with post. Fig.2: Use bolt (CC) and washer (BB) to fasten the oblique beam down (I) on the post (A). Fig.3:Use bolt (DD), washer (BB) and nut (EE) to fasten the beam (B1, B2, C1, C2) through beam s (D1, D2).

6 Fig.4:Use bolt (CC) and washer (BB) to fasten the assembled beam (B1, B2, C1, C2) on the up side of post (A). Fig.5-1:Use bolt (CC) and washer (BB) to fasten the middle beam down (J) with long netting pipe (H, G) on the beam. Fig.5-2: Use bolt (CC) and washer (BB) to fasten the long/short netting pipe (H, G) on the Beam (B1, B2, C1, C2) Fig.6:Firstly cover the decorative ferrule (E) from the bottom to up side on the connecting part of beam. Then use bolt (CC) and washer (BB) to fasten it on the beam. Fig.7-1:Use bolt (FF) and washer (BB) to fasten the arch support on the post (A). Fig.7-2:Use bolt (FF) and washer (BB) to fasten the other side of arch support on the beam (B1, B2, C1, C2). Hardware Pack 2 BB M6 Washer 16 PCS EE M6 Nut 8 PCS GG M6*40 Flat bolt 8 PCS

7 Fig.8:Attach the oblique beam (K) with down pipe (L) as pic. shows. Fig.9:Insert the up side of assembled oblique beam (K) into the tube of big top (O). Fig.10:Use bolt (GG), washer (BB) and nut (EE) to fasten the down side pipe (L) on the oblique beam down side (I). Fig.11:Insert the middle beam (N) into the big top (O), then attach the hook (T) on the. Fig.12:Use bolt (GG), washer (BB) and nut (EE) to fasten middle beam downside pipe (N) on the (J). then cover the big canopy (V) on the top, but do not unfold it. Fig.13:See as the pic. fix the small top oblique beam (P) with small top (Q). Fig.14:Attach the assembled small top to pipe of big top oblique beam (K) through small top oblique beam (P). Hardware Pack 3 HH Ring 52 PCS II 8*180 Stake 16 PCS

8 Fig.15:Cover the small canopy (U) on the top, then button up the 4 sides of canopy on the oblique beam (P). Fig.16: Unfold the big canopy (V), button up the 4 sides on the oblique beam downside pipe (L). Fig.17:Use rings (HH) to hook the netting on the netting pipe (H, G). Fig.18:Use stake (II) to fix the assembled gazebo on the lawn. Your 10x12 woven post gazebo is now ready for use. Please do not return this product to the store. For technical assistance on assembly or replacement parts call Sunjoy Industries at 1(866) from 8:00 AM to 8:00 PM EST or menards@sunjoygroup.com or visit to place your order or fax your parts replacement order form together with your purchase receipt to 1 (740) for assistance.