ASSEMBLY ASSEMBLY. Step 3 Requires D, E

Transcription

1

2

3 φ

4 Model No Model No Note: When using bolts and nuts to assemble the product, always use a flat washer between the frames and the bolt and/or nut. This will protect the parts from wear and tear. Step 1 Requires A, B, AA, BB Attach screen (A) to screen (B) together using bolt (AA) and flat washer (BB). Repeat until all screens are assembled. Step 3 Requires D, E Attach one end of the upper bar (E) into one end of the lower bar (D). AA BB B BB A AA D E Step 4 Requires E, F Connect the other end of the upper bar (E) to the connector (F). Step 2 Requires A, B, C Insert the beam (C) into the screens (A, B) to form a frame structure. C B A E F 6 7

5 Model No Model No Step 5 Requires A, B, D Attach the other end of the lower bar (D) into the respective slots provided in the screens (A, B). D Step 7 Requires G, H After placing the top canopy (H) on the top roof frame, expand the lower canopy (G) on the lower roof frame. Attach the corners of the top canopy and lower canopy to the ends of the upper and lower bars, respectively. A B H G Note: This connection results in the formation of the lower roof frame by the lower portion of the upper bar and top roof frame by the top portion of the upper bar. Step 6 Requires G Place the lower canopy (G) on the lower roof frame. Do not expand the lower canopy at this step. Step 8 Requires DD Secure the gazebo into the ground using the stakes (DD). Repeat this step for every post until all four posts are anchored. DD G DD 8 9

6 Model No CLEANING AND MAINTENANCE CAUTION Check all screws and nuts periodically for tightness, tighten them if required. Disassemble the gazebo in the reverse order of the assembly steps. Always disassemble the gazebo completely. A partially-disassembled gazebo is not stable enough to resist wind and bad weather, and therefore can be damaged and/or cause damage. To wash the fabric parts: - Spread the fabric and use a soft-bristle brush to clean. - Always use a natural soap. Never use detergent. - Water should be cold to lukewarm, not more than 25ºC (77ºF). - Air dry only. Do not spin in washing machine or hand squeeze. Do not use bleach, acid, or other abrasive cleaners on the canopies or frame parts. Steel components of garden accessories and furniture are coated with rust-inhibiting paint. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched. This is a natural process. To minimize this condition, it is recommended that care be taken when assembling and handling the product, in order to prevent the paint from being scratched. Surface rust can be removed easily by applying little common cooking oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the oxidation may start dripping onto the assembly surface, which may cause stains that could be difficult to remove. WARRANTY This product carries a six (6) month warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. 10