SYSTEMS PEERLESS PRODUCT DATA SHEETS APPLICATIONS. for architects and designers. display + shelving systems

Transcription

1 SYSTEMS APPLICATIONS + PRODUCT DATA SHEETS for architects and designers TM PEERLESS display + shelving systems

2 INTRODUCTION PEERLESS systems are designed for use within a variety of interior environments. Known for our quality and innovation, PEERLESS shelving and display fittings will complement any contemporary or traditional project, where equipment may be discreetly integrated or used in more visible applications. Design led in our approach to product development, PEERLESS continues to adapt to customer needs. In addition to our standard systems, our custom manufacturing service also allows us to efficiently reflect any concept or brief. This brochure illustrates a few examples of how PEERLESS may be applied. OFFICES RECEPTIONS SHOWROOMS GALLERIES MUSEUMS EXHIBITIONS BARS & RESTAURANTS HOTELS RETAIL VISITOR CENTRES HEALTH & LEISURE CLUBS RESIDENTIAL Visit our London Showroom

3 MODULAR SHELVING RECESSED vertical + horizontal NON-MODULAR SHELVING / GRAPHICS

4 RECESSED + APPLIED horizontal OFFICE NON-MODULAR SHELVING / STORAGE PRESENTATION NON-MODULAR SHELVING / GRAPHICS

5 SURFACE MOUNTED MODULAR SHELVING APPLIED vertical FLOOR TO WALL POST SYSTEMS FLOOR TO WALL MODULAR UNITS

6 FLOOR + CEILING ISLAND UNITS SHELVING STORAGE SCREENS DIVIDERS SHELVING CABLE DISPLAYS

7 INTEGRAL vertical ALCOVE / BACK BAR REAR MOUNTED SHELVING ALCOVE / CABINET / SHOWCASE SIDE MOUNTED SHELVING

8 INTEGRAL ferrules FLOOR TO WALL PANELS FEATURE STRUCTURES COLUMN SHELVING PERIMETER PANELS FURNITURE

9 WALL PANELS GRAPHICS / SIGNAGE PRESENTATION INTEGRAL ferrules2 WALL PANELS SHELVING

10 CLOTHING storage + display CLOAKROOM STORAGE DRESSING ROOMS RETAIL DISPLAY

11 FASHION PRESENTATION CUSTOM MANUFACTURE DISPLAY FURNITURE FREESTANDING UNITS

12 PRODUCT INFORMATION DATA SHEETS PEERLESS DESIGNS DISPLAY AND SHELVING SYSTEMS

13 DATE JUL 2011 CONTENTS UPRIGHTS, POSTS AND FITTINGS, WALL AND CEILING FRAMES 1.01 UPRIGHT AND POST PROFILES 1.02 APPLIED UPRIGHTS 1.03 SIDELINE 1.04 PANELINE 1.05 RECTANGULAR 1.06 SQUARE 1.07 APPLIED POSTS 1.08 ELLIPTICAL 1.09 ALTO - TUBE 1.10 FREELINE MOBILE SYSTEM 1.11 FREELINE MOBILE SYSTEM 1.12 FREELINE MOBILE SYSTEM 1.13 ELLIPSE 1.14 OMNI WALL - LARGE / REGULAR 1.15 OMNI WALL - SMALL / MEDIUM 1.16 VERSO BRACKETS AND FITTINGS 2.01 LINEAR 2.02 LINEAR 2.03 CURVED 2.04 RECTANGULAR 2.05 ELLIPSE 2.06 SPECIALIST DISPLAY RAILS, ARMS AND FITTINGS 3.01 STANDARD 3.02 INTERMEDIATE 3.03 FINE 3.04 ONE PIECE RAILS 3.05 RECTANGULAR 3.06 FOIL FERRULES AND FITTINGS 4.01 FERRULE RANGE 4.02 HD HEAVY DUTY 4.03 CIRCULAR RAILS 4.04 QUARTZ ROUND 4.05 QUARTZ SQUARE 4.06 CAP 4.07 rpuc BLADE 4.08 rpuc BLADE 4.09 rpuc TUBULAR 4.10 ipuc ipuc opuc xpuc VIRTUA ALULINE HORIZONTAL SYSTEM 5.01 VIRTUA - ALULINE 5.02 VIRTUA - ALULINE vpuc 5.03 VIRTUA - ALULINE FITTINGS 5.04 VIRTUA - ALUBOARD VIRTUA vtrack - MOVELINE FLOOR UNITS 6.01 FREELINE 6.02 ROTOR 6.03 OMNI SMALL 6.04 OMNI LARGE 6.05 OMNI SINGLE AND TWO-WAY 6.06 AXUS 6.07 VARIA 6.08 BESPOKE FURNITURE TABLES AND GLASS CUBES 7.01 STEPPE 7.02 TRIO AND GLASS CUBES

14 DATA SHEET NO 1.01 PRODUCT UPRIGHT AND POST PROFILES Full size details. See Peerless Data Sheets for further details SU.70 Data Sheet 1.03 SU.75 Data Sheet 1.04 SU.10 Data Sheet 1.02 SU.30 Data Sheet 1.02 SU.80 Data Sheet 1.02 SU.40 Data Sheet 1.02 SU.25 Data Sheet 1.02 SU.20 Data Sheet 1.02 SU.32 Data Sheet 1.02 SU.60 Data Sheet 1.06 SU.95 Data Sheet 1.08 SU.22 Data Sheet 1.07 SU.35 Data Sheet 1.07 SU.50 Data Sheet 1.06 SU.90 Data Sheet 1.08/1.09 SU.96 Data Sheet 1.10/1.11/1.13 SU.55 Data Sheet 1.02 SU.94 Data Sheet 1.08 SU.92 Data Sheet 1.08 SU.58 Data Sheet 1.05/1.12 SU.56 Data Sheet 1.05 SU.54 Data Sheet 1.05 SU.52 Data Sheet 1.05

15 DATA SHEET NO 1.02 PRODUCT APPLIED UPRIGHTS SU.10 UPRIGHT LENGTH 2500 nominal SU.30 UPRIGHT LENGTH 2500 nominal SU.40 UPRIGHT LENGTH 2500 nominal SU.80 UPRIGHT LENGTH 2500 nominal SU.25 UPRIGHT LENGTH 2500 nominal SU.20 UPRIGHT LENGTH 2500 nominal SU.32 UPRIGHT LENGTH 3000 nominal SU.55 SU.31 UPRIGHT INFILL LENGTH 2500 nominal For use with SU Applied uprights for use in normal or heavy duty applications, designed to to accommodate removable infill infill panels, panels. It are is recommended for that supporting on timber verticals of should minimum be of size minimum 44 x 44 size for stability. 44 x 44 for stability. SU.40, and SU.80 SU.80 and uprights SU.55 uprights are reversible. are reversible. SU.10 SU.20 SU.30 SU.80 SU.80 SU.55 SU SU.P5 PANEL RETAINER Finish - Clear Acrylic For 1mm recessed slotted uprights (SU.10, SU.30) SU SU.31 SU.31 INFILL LENGTH 2500 nominal For use within SU.30 SU.80 and uprights SU.55 may uprights be may be used in left set or into right sides hand of 25mm format; SU.80 uprights may also be set into sides of 25mm panels, securely panels, screwed securely and screwed bonded. SU.40 and bonded.. Customised posts may SU.20 be constructed,. using uprights, as examples below. SU.P6 PANEL RETAINER Finish - Clear Acrylic For 11mm recessed slotted uprights (SU.20, SU.22, SU.25, SU.32, SU.34, SU.35, SU.40, SU.60, SU.80) SU.32 SU.40. SU.80 SU.10 SU.32. SU.20 Custom posts may be constructed using uprights, as example above.

16 DATA SHEET NO 1.03 PRODUCT SIDELINE FITTINGS SU.70 uprights for rebating into panels or hardwood posts. Recommended for side fittings only, not for cantilevered loads. Apply strong adhesive to sides of upright when fixing, ensuring rear slot is kept clear to avoid impeding bracket location. SU.70 UPRIGHT LENGTH 2500 Nominal 15 SU.70 SU.10 SU.10 uprights. Suitable for side fixing and for use with infill panels. 7.6 SU.10 US.01 A SU.70 US.01 SHELF CLIP US.01 GS.01 B US.01 GS.01 US.02 TS.10 C US.02 GS.10 US.02 SHELF CLIP US.02 GS.10 D DISPLAY RAILS GS.01 SHELF STUD for use with US.01 GS.10 SHELF WASHER for use with US.02 TS.10 SHELF CLIP for use with US.02 DISPLAY RAILS Display rails and fittings are available - see later data sheets FUS.04 GS.10 FUS.04 GS.10 CSF.M6 MICRO FERRULE FUS.04 TOGGLE FUS.04 TS.10 FUS.04 GS.10 E F

17 DATA SHEET NO 1.04 PRODUCT PANELINE UPRIGHTS 12 SU.75 UPRIGHT LENGTH 2500 nominal Paneline SU.75 uprights are designed for fitting directly into rebated slots in MDF or plywood panels or hardwood posts. Uprights are ideal for either side fixing within wardrobes or recessed fixtures, or rear location within back panels or posts. For rear applications, displays should be of a light or medium duty load, subject to appropriate panel specification. Contractors must ensure suitable fixing on site to support desired load. Regular rebate - For uprights rebated into side panels (minimum thickness 18mm), to receive US.01 or US.02 shelf clips only (see previous page) using routers below Deep rebate - For uprights rebated into side or rear panels (minimum thickness 25mm), using routers below, to receive projected fittings for lightweight use. Uprights may also be secured with optional self tap screws fitted from rear. R0.01 PRIMARY ROUTER R0.02 SECONDARY ROUTER REAR APPLICATIONS NOTE To form slot to receive SU.75 upright, it is important to use primary router to create initial guide slot, followed by secondary router to create undercut slot, all in accordance with separate joiners instruction sheet. For thicker panels or hardwood posts, initial slots may be cut 3mm deeper to accept standard Peerless brackets. Please note that use of secondary router without initial slot is likely to cause breakage. In all applications, face of uprights should master face of joinery. An optional joinery service is available for supply of panels and hardwood sections complete with SU.75 upright to suit customer specifications and finish. REGULAR SLOT APPLICATIONS (RSA) A B C D Regular depth slots above are designed to accept side shelf clips or specially adapted side fittings (e.g. rail side cups) on request. DEEP SLOT APPLICATIONS (DSA) E F G H SIDE APPLICATIONS Deep slots accept standard lightweight brackets and fittings as illustrated within data sheets. Please note that standard equipment will not locate into regular slot depths.

18 DATA SHEET NO 1.05 PRODUCT RECTANGULAR POSTS AND FITTINGS Rectangular post uprights may be used in applied perimeter or mid-floor applications. An associated range of rectangular fittings are available (see Rectangular brackets, rails and fittings on respective data sheets). Alternatively, posts may be combined with a wide variety of other Peerless accessories. SU.56 POST UPRIGHT LENGTH 2500 nominal 20 SU.58 POST UPRIGHT LENGTH 3000 nominal 15 SU.54 POST UPRIGHT LENGTH 3000 nominal 20 SU.52 POST UPRIGHT LENGTH 3000 nominal TIMBER TOP CAP TC.52 For SU.52 TC.54 For SU.54 TOP CAP TC.21 For SU.52 TC.29 For SU.54 TOP CAP TC.31 For SU.58 TC.52 SU.52 FU.24 TC.29 ADJUSTABLE WALL RESTRAINT WU.22 For SU.52/SU.54 WALL RESTRAINT WU.21 For SU.54 WALL FIXING PLATE WU.18 For SU.52 WU.30 For SU.58 SU.56 WU.21 WU.18 RMB.30 RIFA.30 ADJUSTABLE FOOT FU.22 For SU.52 FU.30 For SU.54 ADJUSTABLE FOOT FU.23 For SU.52 FU.31 For SU.54 ADJUSTABLE FOOT FU.34 For SU.58 SU.58 SU.54 WU.22 RUDR.100 RLB.25 SU.52 TOP/BOTTOM FIXING PLATE FU.25 For SU.52/SU.54 POST BASE SPIGOT FUHD.52 For SU.52/SU.54 For use with gondolas CONCEALED FIXING BLOCK FU.24 For SU.52/SU.54 WU.30 FU.34 FU.31 FU.22 FU.25

19 DATA SHEET NO 1.06 PRODUCT SQUARE POSTS AND FITTINGS SU.50 POST UPRIGHT LENGTH 3000 nominal SU.50 and SU.60 posts may be used for applied or self supporting structures, in perimeter or island locations, using the alternative fixings below. Posts will accept a wide variety of loose Peerless brackets, rails and accessories illustrated within our data sheets. TC.50/60 TC.30 TC.61 WU.33 WU SU.60 POST UPRIGHT LENGTH 3000 nominal TIMBER TOP CAPS TC x 50 x 50 TC x 63 x 63 TC x 30 x 80 TC Ø Available to order. CUSTOM TC.02 WALL RESTRAINT WU.24 For top fixing of post WU.33 For extended top fixing of post - alternative lengths to order COVER PLATE WU.26 For optional use with SU.50 post. WU TC.01 TIMBER CORNERS TC.01 SQUARE TC.02 RADIUSED LENGTH 3000 Available to order, loose or pre-bonded to SU.60 posts. WU.24 WU.26 TC.50 WU.23 WU.33 RURR.100 RISA.40D 14 RIFA.30D SU.60 FU WALL RESTRAINT WU.23 For SU.50 TC.01 RURR.100 RMB.30 SU.50 FU.01/06 METAL TOP CAP FU Ø WALL RESTRAINT WU.00 For SU.50 WU.01 For SU.60 WU.00 RUDR.100 RIFA.30 FU.32/33 FU.02 FU.03 FU.02i FIXING PLATES FU x 75 For SU.50 FU x 50 For SU.50 FU x 60 For SU.60 FU Ø For SU.60 FU x 50 For SU.50 FU x 50 For SU.60 POST BASE SPIGOT FU.HD6 FU.07 THREADED INSERT FU.02i ADJUSTABLE FEET FU Ø FU.03 Use with FU.02 FU.02 FU.03 TC.02 FU.02i FU.07 FU.33

20 PRODUCT APPLIED POSTS AND FITTINGS DATA SHEET NO 1.07 SU.35 POST UPRIGHT LENGTH nominal SU.22 POST UPRIGHT LENGTH nominal Twin or single slot posts for use in applied or self supporting structural applications on perimeter or island locations. A range of fittings are available to accommodate a variety of fixing positions. Posts may be used plain with infill panels or customised using timber claddings as examples below TC SU.22 FDR.100 FDC.33 TC.05 WU.09 SU.35 FDC.32 WU.07 RURR.100 RIFA.30 CSB.30 UTS.01 SU.35 RISA.30 RMB.30 US.07 TC.05 TIMBER CLADDING Available to order FU.02i FU.07 WU.07 POST WALL RESTRAINT TC.03 TIMBER CLADDING Available to order FU.15 ADJUSTABLE FOOT FU.02i THREADED INSERT FU.07 ADJUSTABLE FOOT FU.16 POST FIXING PLATE WU.09 POST WALL PLATE

21 DATA SHEET NO 1.08 PRODUCT ELLIPTICAL POSTS AND FITTINGS Posts for perimeter or island locations using fittings as illustrated, or applied uprights for face fixing directly onto elevations. SU.95 POST UPRIGHT LENGTH 3000 nominal SU.94 POST UPRIGHT LENGTH 3000 nominal SU.90 POST UPRIGHT LENGTH 2500 nominal SU.92 POST UPRIGHT LENGTH 2500 nominal PT PT.00 TIMBER TOP CAP TC.94 For SU.94/SU.95 TC.95 For use with WU.05 TIMBER TOP CAP TC.90 For SU.90 TC.92 For SU.92 TC.95 WU.05 FU.14 SU.94 WALL TOGGLES PT.00 For post to wall fixing of SU.90 PT.01 For post to wall fixing of SU.92 BOTTOM WALL STOP / TOP CAP FU.27 For SU.90 FU.28 For SU.92 ADJUSTABLE FOOT FU.11 For SU.90 FU.26 For SU.92 TC.92 SU.92 PT.01 SU.95 FA.30 URR.100 FU.12 ADJUSTABLE FOOT For SU.94 or SU.95 WU.05 WALL RESTRAINT For top wall fixing of SU.94 or SU.95 TC.04 TOP CAP For SU.94/SU.95 WU.19 WALL RESTRAINT For post to wall fixing of SU.94 CSB.30 US.00 FU.28 PT.00 WU.06 UDR.100 SU.90 FUHD.9 POSTBASE SPIGOT FU.13 FIXING PLATE For SU.94/SU.95 FU.14 FIXING PLATE For SU.94/SU.95 WU.06 WALL RESTRAINT For mid fixing of For SU.94/SU.95 FU.11 FU.12

22 DATA SHEET NO 1.09 PRODUCT ALTO - TUBE POSTS AND FITTINGS The ALTO tube range of round vertical posts for wall mounted applications, with adjustable feet and supporting wall restraints. Posts are discreetly slotted to their rear, to receive a selection of display rails, arms and shelf support rods, attached using two-part collars. POST PROFILE 30 Ø *Posts should be installed at 625 horizontal centres where display rails are to be used. ALWU.01 ALRR.122 ALPA.20 ADJUSTABLE WALL RESTRAINT SET ALWU.01 LENGTH or 2 No restraints per post subject to post height. ALFA.10D ALHA.22 ALPA.20D ALFA.30 ALDR.122 POST ASSEMBLY includes post and foot. AL.225 POST 2240L AL.250 POST 2490L AL.275 POST 2740L AL.300 POST 2990L Adjustable foot adds 65-85mm to post length. ALTA.60 ALGS.35 ALB.32 GLASS SHELF ALGS x350x8 with radius corners. Other glass sizes and timber shelves to order. DISPLAY RAIL ALDR L x 25Ø REAR DISPLAY RAIL ALRR L x 25Ø TWO WAY ARM ALTA L x 315 x 25Ø SHELF SUPPORT BRACKET SET ALB L x 20Ø Set of 2 brackets with plastic studs. ALFA.30D ALPA.20D ALFA.30 ALPA.20 ALHA.22 POST ARMS AND PRONGS ALFA.10D ARM 100L x 20Ø ALFA.30D ARM 300L x 20Ø ALPA.15D PRONG 150L x 10Ø ALPA.20D PRONG 200L x 10Ø RAIL ARMS AND PRONGS ALFA.30 ARM 300L x 20Ø ALPA.20 PRONG 200L x 10Ø ALHA.12 HOOK 120L x 6Ø ALHA.22 HOOK 220L x 6Ø

23 DATA SHEET NO 1.10 PRODUCT FREELINE MOBILE SYSTEM The FREELINE system is designed to offer complete flexibility, combining both horizontal and vertical adjustability. Surface mounted or semi-recessed crossrails are available for single or double tier presentation, with optional decorative claddings. CRC CRS.300 CROSSRAIL LENGTH 3000 CRS.301 CAPPING LENGTH 3000 Freely adjustable verticals suspend from crossrails for non-modular displays, ideal for retail and architectural interiors CRS.302 TIMBER FACING LENGTH 2400 FCPA.15 CRE.00 END CAP MID STOP FSA.35D FFA.35D FFA.25 FSU.964 FDR.100 FDC.05 FEC.01 CSB.40 US.00 CRS.300 CRS.301 CSB.30 US.03 FSU.962 US.06 FDR.100 FDC.23 FEC.01 FSU.963 FFA.25D FDR.100 FDC.23 FEC max CRE.00 FSA.35D 9 FSU.961 FSU.963 Peerless CURVED brackets, FINE rails and accessories are ideal for FREELINE, or alternative Peerless fittings may be readily applied CRC.300 crossrails are designed to be partially concealed by facing panels, leaving a discreet 11mm visible profile. CRC.300 CROSSRAIL LENGTH 3000

24 DATA SHEET NO 1.11 PRODUCT FREELINE MOBILE SYSTEM CRS.300 CRS.301 CRC.300 ELLIPSE POST ASSEMBLY FSU.961 LENGTH 370 FSU.962 LENGTH 720 FSU.963 LENGTH 970 FSU.964 LENGTH (1500 length includes mid stop) 17 SU.96 POST PROFILE C CRC.300 Freely adjustable verticals suspend from crossrails for non-modular displays, ideal for retail and architectural interiors. A B CSB.23 US.03 FFA.25D SU.25 CP.15 CRS.300 CRS.301 EDS.81 STRAP FDH.05 DISPLAY HOOK FFA.08D FSU.961 CPF.M10 US.06 FDR.60 FDC.23 FEC.01 RP.08 FDR.100 FDC.35 FEC.01 SP.25 FSU.963 FPH.10 SUPPORT HOOK DISPLAY BUST FDB.20 F FEMALE FDB.20 M MALE FDB.20 C CHILD Includes support bracket FMR.150 MIRROR 1500L x 400W Includes straps FSU.962 FREELINE POSTS AND PANELS ARE MOBILE Interchangeable panels are available to order for graphic presentations, or pre-fitted with integral Peerless ferrules or slotted uprights ready to receive adjustable accessories. Panel options A, B, C illustrate three examples of many different configurations offered. FPH.11 SPACER HOOK Includes neoprene pad

25 DATA SHEET NO 1.12 PRODUCT FREELINE MOBILE SYSTEM CRS.300 CRS.301 CRC.300 RECTANGULAR POST ASSEMBLY FSU.581 LENGTH 370 FSU.582 LENGTH 720 FSU.583 LENGTH 970 FSU.584 LENGTH 1480 (1500 length includes mid stop) SU.58 POST PROFILE CRC.300 Freely adjustable Rectangular verticals may be used with our associated Rectangular brackets and rails or alternative ranges. CRS.300 CRS.301 FSU.582 Examples of special fittings to order RMB.25 US.07 US.06 RLB.20 GS.05 FDR.100 FDC.35 FEC.01 FSU.583 FREELINE POSTS AND PANELS ARE MOBILE Standard FREELINE fittings may be combined with our CUSTOM manufactured accessories for individual presentation and storage needs. Suitable for perimeter and mid floor applications. FREELINE floor units are available with a selection of accessories illustrated within data sheets

26 DATA SHEET NO 1.13 PRODUCT ELLIPSE POST AND FITTINGS The ELLIPSE micro posts are ideal for retail, commercial and display needs. ELLIPSE brackets and fittings illustrated on Data Sheet No 2.05 may be applied for shelving or graphic presentation. 17 Alternative Peerless accessories may be used for suitable applications. FU.18 FU FU.19 WU.27 WU.16 SU.96 PROFILE LENGTH 3000 FIXING PLATE FU.18 WU.16 TOP CAP FU.19 WALL FIXING ANCHOR PLATE FU.20 For use with WU.15 or WU.27 FU.18 FU.20 A FU.18 B C WALL FIXING BOSS WU.15 WALL TO WALL Option A FLOOR TO CEILING Option B WALL TO FLOOR Option C WU.16 WU.27 WU.15 FU.19 FU.18 FU.19 WU.16 WALL FIXING PLATES WU projection Use with floor mounted posts only WU projection Posts may be surfaced mounted as options A, B and C using alternative fixings, or integrated within joinery or glazed displays. WU.27 FU.20 FU.18 WU.16 FU.18 HEAVY DUTY BASE SPIGOT FUHD.96

27 DATA SHEET NO 1.14 PRODUCT OMNI WALL UNITS LARGE REGULAR Nominal dimensions are given in millimetres OMNI wall units are available in four standard sizes, providing contemporary, adaptable fixtures, ideal for fashion, accessory and giftware products. Merchandise may be displayed directly from fine stainless steel frames or optional fittings. These include glass or timber shelves, accessory prongs and intermediate display rails for front and side presentation. LARGER units featured below are designed to rest on floors with simple fixing to walls. See next page for SMALLER units. Wall units may be combined with our OMNI floor units. TOP GLASS SHELF ASSEMBLY TGS.06R 1155 x 340 x 8 with radius corners Including support pillars which add 70mm to overall unit height OFA.40 Optional forward arm heights 1100, 1420, 1740 off floor ODR.120 Optional display rail heights 1100, 1420, 1740 off floor OMNI PERIMETER RANGE OW.H2 MERCHANDISING EXAMPLES OW.R2 OW.H2 OW.M2 OW.S2 Top shelves optional OMNI LARGE FRAME OW.H2 2120H x 1200W x 300D Frames are 20 x 20 square tube and supplied with wall fixing spacers. Shelving optional. TGS.06R ODR.120 Optional display rail height 1100 off floor FORWARD ARM OFA D including fixing screw OMNI REGULAR FRAME OW.R2 1480H x 1200W x 300D Frames are 20 x 20 square tube and supplied with wall fixing spacers. Shelving optional OW.R2 MERCHANDISING EXAMPLES MID GLASS SHELF MGS.05R 1155 x 340 x 8 with radius corners and supports INTERMEDIATE DISPLAY RAIL ODR L x 300D including supports ACCESSORIES RAIL OPR L with 10 No. Capped prongs 150L x 8 Ø for fitting immediately below top frame or under intermediate rail TIMBER SHELF OTS x 340 x 26 including supports

28 DATA SHEET NO 1.15 PRODUCT OMNI WALL UNITS SMALL MEDIUM Nominal dimensions are given in millimetres OMNI wall units are available in four standard sizes, providing contemporary, adaptable fixtures, ideal for fashion, accessory and giftware products. Merchandise may be displayed directly from fine stainless steel frames or optional fittings. These include glass or timber shelves, accessory prongs and intermediate display rails for front and side presentation. SMALLER units featured below are designed to be easily fixed to walls. See previous page for LARGER units. Wall units may be combined with our OMNI floor units. TOP GLASS SHELF TGS.06R 1155 x 340 x 8 with radius corners Including support pillars OMNI SMALL FRAME OW.S2 400H x 1200W x 300D Frames are 20 x 20 square tube. Shelving optional OMNI PERIMETER RANGE OW.R2 OW.H2 OW.M2 OW.S2 Top shelves optional OW.S2 MERCHANDISING EXAMPLES TGS.06R OMNI MEDIUM FRAME OW.M2 1030H x 1200W x 300D Frames are 20 x 20 square tube. Shelving optional ACCESSORIES PANEL OWP H x 1150W x 20 thick For use within Medium, Regular and Large frames. Includes fixings and optional ferrules positioned to order along with alternative prongs. See relevant data sheets for details. OW.M2 MERCHANDISING EXAMPLES ACCESSORIES RAIL OPR L with 10 No. Capped prongs 150L x 8 Ø for fitting immediately below top or bottom of frames MID GLASS SHELF MGS.05R 1155 x 340 x 8 with radius corners and supports TIMBER SHELF OTS x 340 x 26 including supports

29 DATA SHEET NO 1.16 PRODUCT VERSO WALL AND CEILING UNITS Nominal dimensions are given in millimetres VERSO units provide contemporary, innovative displays for retail or showroom interiors. Ideal for fashion and accessories, these flexible units offer side or front hanging with optional shelving. The fine stainless steel frames are available with fittings for floor to wall, wall to ceiling and mid floor suspended locations subject to site conditions. Wall units may be combined with our ROTOR or OMNI floor units. Release pin for height adjustability VGS.01R VGS.01R WALL TO CEILING FRAME VWF W x 430D x 1500H (2100H max. extended) Includes wall and ceiling bosses. Shelving optional VFP.01 CEILING PLATE Optional item, for additional support Pivoting top joint for added shock absorbtion CEILING FRAME VWF W x 600D x 1500H (2100H max. extended) Includes ceiling bosses. Excludes optional VFP.01 plate. Shelving optional VGS.02R VGS.02R FLOOR TO WALL FRAME VWF H x 1210W x 430D Includes wall and floor bosses. Shelving optional VGS.01R VGS.01R Frames are 25 x 25 square tube with 15 Ø arms and shelf supports VARIABLE FLOOR SPIGOT VFS.01 for uneven floors VWF.03 VWF.02 VWF.01 MERCHANDISING EXAMPLES DECORATIVE PLUG VDP.02 for fitting into frames if display arms removed GLASS SHELF with radius corners and supports VGS.01R 1155 x 340 x 8 for VWF.01 and VWF.02 frames VGS.02R 1155 x 340 x 8 for VWF.03 frame

30 DATA SHEET NO 2.01 PRODUCT LINEAR BRACKETS DATA - VISIBLE PROJECTION FROM FACE OF UPRIGHT STANDARD BRACKET LIGHTWEIGHT BRACKET ADJUSTABLE BRACKET HEAVY DUTY BRACKET TWO-WAY BRACKET BRACKET TYPE BLADE UPRIGHT SLOT TYPE No OF HEIGHT A B C HOOKS STANDARD SB SB SB LIGHTWEIGHT LB LB LB LB ADJUSTABLE (When in level position) AB AB AB HEAVY DUTY HB HB HB TWO-WAY TB wide 2 PELMET PB To order SLOT : TYPE A - 1mm Recessed - SU.10, SU.30, SU.55, SU.75 (DSA) TYPE B - 8mm Recessed - SU.50 TYPE C - 11mm Recessed - SU.20, SU.22, SU.25, SU.32, SU.35, SU.40, SU.52, SU.54, SU.56, SU.58, SU.60, SU.80, SU.90, SU.92, SU.94, SU.95, SU.96 All brackets are flat blade type, constructed from 3mm mild steel. Designed for universal use on all uprights. For use with shelf fittings illustrated on data sheets no and PELMET BRACKET Pelmet brackets made to order to customers specification FB.01 FIXING BRACKET FB.02 FIXING BRACKET Left hand FB.03 FIXING BRACKET Right hand SH.03 SUPPORT HOOK

31 PRODUCT LINEAR BRACKET FITTINGS DATA SHEET NO 2.02 US.00 UNIVERSAL SHELF CLIP For use in single or double applications. Reversible for alternative shelf positions. GS.M6 GLASS SHELF SCREW For use with GS.02 washers SS.M6 GLASS SHELF SCREW For use with GS.04 washers GS.01 GLASS SHELF PLASTIC STUD For use with US.00 GLASS SHELF WASHER GS.02 For use with GS.M6 and US.00 GS.04 For use with SS.M6 and US.00 FS.M6 SINGLE LOCKING SCREW For fixing of US.00 single sided DS.M6 DOUBLE LOCKING SCREW For fixing of US.00 double sided TS.05 DOUBLE STUD For use with US.00 and TS.M6 insert TS.M6 INSERT For use with TS.05 stud or DS.M6 AK.10 ALLEN KEY SET A D Glass shelves supported inside standard or lightweight brackets B Glass shelves supported over standard or lightweight brackets E C F J Solid shelves supported inside standard or lightweight brackets G H Solid shelves supported over standard or lightweight brackets Shelves may be fitted with TS.M6 ferrules for use with TS.05 stud or DS.M6 locking screw, to give secure fixing on US.00 shelf clips as illustrated in diagram H K

32 PRODUCT CURVED BRACKETS AND FITTINGS DATA SHEET NO 2.03 DATA - VISIBLE PROJECTION FROM FACE OF UPRIGHT STANDARD BRACKET ADJUSTABLE BRACKET HEAVY DUTY BRACKET TWO-WAY BRACKET BRACKET TYPE UPRIGHT SLOT TYPE No OF A B C HOOKS STANDARD CSB CSB CSB CSB CSB CSB ADJUSTABLE BRACKET (When in level position) CAB CAB CAB HEAVY DUTY BRACKET CHB CHB CHB TWO-WAY BRACKET CTB wide 2 SLOT : TYPE A - 1mm Recessed - SU.10, SU.30, SU.55, SU.75 (DSA) TYPE B - 8mm Recessed - SU.50 TYPE C - 11mm Recessed - SU.20, SU.22, SU.25, SU.32, SU.35, SU.40, SU.52, SU.54, SU.56, SU.58, SU.60, SU.80, SU.90, SU.92, SU.94, SU.95, SU.96 All brackets are flat blade type, constructed from 3mm mild steel. Designed for universal use on all uprights. Shelves can be fitted in single or double format using fittings illustrated below and on previous data sheet. US.03 BARREL SHELF CLIP For use with GS.01 or GS.M6/GS.02 fittings illustrated on previous data sheet. Glass shelves supported over brackets on US.03 shelf clip L M Glass shelves supported over brackets on US.00 shelf clip, using fittings illustrated in examples C&E on previous data sheet. Glass shelves supported inside brackets on FUS.03/FUS.04 toggles with GS.10 washers. FUS.03 TOGGLE FUS.04 DOUBLE TOGGLE N FS.M6 LOCKING SCREW GS.10 SHELF WASHER For use with glass shelves O

33 DATA SHEET NO 2.04 PRODUCT RECTANGULAR BRACKETS AND FITTINGS All brackets are flat blade type, constructed from 3mm mild steel. Designed for universal use on all uprights, shelves can be fitted for single or double sided applications using components illustrated below or on other data sheets. LIGHTWEIGHT BRACKET MEDIUM BRACKET ADJUSTABLE BRACKET STANDARD BRACKET TWO-WAY BRACKET DATA - VISIBLE PROJECTION FROM FACE OF UPRIGHT BRACKET TYPE BLADE UPRIGHT SLOT TYPE No OF HEIGHT A B C HOOKS LIGHTWEIGHT RLB RLB RLB MEDIUM RMB RMB RMB RMB ADJUSTABLE (When in level position) RAB RAB RAB TWO-WAY RTB wide 2 STANDARD RSB RSB RSB HEAVY DUTY RHB.50 (to order) SLOT : TYPE A - 1mm Recessed - SU.10, SU.30, SU.55, SU.75 (DSA) TYPE B - 8mm Recessed - SU.50 TYPE C - 11mm Recessed - SU.20, SU.22, SU.25, SU.32, SU.35, SU.40, SU.52, SU.54, SU.56, SU.58, SU.60, SU.80, SU.90, SU.92, SU.94, SU.95, SU.96 A US.07 RECTANGULAR SHELF CLIP FS.M6 SINGLE LOCKING SCREW For use with US.07 DS.M6 DOUBLE LOCKING SCREW For use with double application of US.07 B C GS.04 GLASS SHELF WASHER SS.M6 GLASS SHELF SCREW GS.03 GLASS SHELF PLASTIC STUD GS.05 GLASS SHELF PLASTIC SADDLE

34 PRODUCT ELLIPSE BRACKETS AND FITTINGS DATA SHEET NO 2.05 ELLIPSE DUAL BRACKET ELLIPSE CLAMP BRACKET Includes 3 No GS.07 plastic sleeves for 6mm glass shelves BRACKET VISIBLE TYPE LENGTH ANGLE AT 0 ELLIPSE DUAL EDB ,-10 EDB ,-10 EDB ,-10 ELLIPSE CLAMP ECB ,+10 Note: Visible lengths apply for brackets locating into uprights with slots recessed 11mm SINGLE TOGGLE SET UTS.01 (as view A) DOUBLE TOGGLE SET UTS.02 (as view B) C D E F A B FS.M6 DS.M6 GLASS SHELF SCREW 16Ø GS.M6 PH.00 GLASS SHELF WASHER GS.02 ERB.02 DS.M6 GLASS SHELF STUD GS.01 ERB.01 US.05 FS.M6 BARREL SHELF CLIP US.04 SINGLE LOCKING SCREW FS.M6 (as view E) DOUBLE LOCKING SCREW DS.M6 (as view F) Shelves may be horizontal or sloping by varying the position of the ERB.02 brackets FIXING CLAMP US.05 Use with ERB.01 and ERB.02 as view E/F EFB.02 EFB.03 ERB.02 EFB.01 SU.96 ACRYLIC POSTER HOLDER PH.00 sizes to order US.05 ERB.02 ACRYLIC ANGLED SHELF GCS.01 sizes to order. L/H D/H R/H EFB.00 REVERSIBLE BRACKET ERB.01 EXTENDED REVERSIBLE BRACKET ERB.02 DUAL ANGLED FIXING BRACKETS EFB.01 L/H 15, 25 EFB.00 0, 10 EFB.02 R/H 15, 25 EFB.03 D/H 15, 25

35 DATA SHEET NO 2.06 PRODUCT SPECIALIST BRACKETS AND FITTINGS SU.70 SU.70 SU.75 SU SU OPTICAL SINGLE PRONG OPP.02 OPTICAL TWIN PRONG OPP.03 Single and twin optical prongs may be located into panels containing SU.70 or SU.75 recessed uprights. SU.75 uprights may also be combined with ELLIPSE or other PEERLESS brackets to carry lightweight shelves for optical displays. BEB.00 BEB SLOPE 10 SLOPE LEVEL BAB.10 ANGLED BOOK SHELF BRACKET BAB.10 ANGLED BOOK END SHELF BRACKET BEB.10 BOOK END SHELF BRACKET BEB.00 Note: Book brackets are available to order for LH, RH or double sided (DH) format. FGS.M6 FGS.02 CANTILEVER BRACKET (2 Parts) CB.200 LENGTH 200 CB.250 LENGTH 250 CB.300 LENGTH 300 For support of timber shelves fixed from underside, or glass shelves using screws/washers illustrated GLASS SHELF SCREW 25Ø FGS.M6 GLASS SHELF WASHER FGS.02 UT.00 UT.00 UT.01 GS.10 E FS.M6 GS.10 F METAL SHELVES AND FIXINGS Metal shelves are available to order, and may be connected to brackets using SHELF TOGGLES UT.00 and UT.01 above. FS.M6 screws and GS.10 washers should also be used as illustrated.

36 DATA SHEET NO 3.01 PRODUCT STANDARD RAILS AND FITTINGS A range of STANDARD flat oval display rails and accessories, for location into Peerless uprights and posts. Designed for total flexibility, these rails are suitable for direct side hanging of merchandise, or as rear supports for forward facing arms using appropriate brackets. Alternative rail lengths are available on request to suit a variety of modular sizes DISPLAY 'Z' RAIL ZR.100 LENGTH 995 For use with uprights at 1000 centres. ZR.120 LENGTH 1195 For use with uprights at 1200 centres. EXTENDED RAIL SUPPORT CUP DC.32 Left Hand DC.33 Right Hand LENGTH DISPLAY RAIL DR.100 LENGTH 995 For use with uprights at 1000 centres. DR.120 LENGTH 1195 For use with uprights at 1200 centres. SC.13 ARM SUPPORT ADAPTOR AS.10 For location into 8mm recessed slot. AS.11 For location into 11mm recessed slot. SC.10 SC.11 SC.12 RAIL SIDE CUP SC.10 For location into uprights with slots recessed 1mm SC.11 For location into uprights with slots recessed 8mm SC.12 For location into uprights with slots recessed 11mm SC.13 Face fixed RAIL SUPPORT CUP DC.02 Left hand DC.03 Right hand EXTENDED RAIL SUPPORT COLLAR DC.30 LENGTH 300 RAIL SUPPORT COLLAR DC.01 COLLAR CAP CC.01 For use with DC.01 and DC.30 DISPLAY RAIL END CAP EC.00 For location into ends of STANDARD rails SUPPORT HOOK SSH.20 ARM PROFILE RAIL PROFILE STEPPED ARM SA.40 Length 400 SA.50 Length 500 RAKED ARM RA.12 (12 PIN) FORWARD ARM FA.30 LENGTH 300 FA.40 LENGTH 400 FA.50 LENGTH 500 C ARM CR.50 LENGTH 500 CR.60 LENGTH 600 TWO WAY ARM TWA.60 LENGTH 500 x 270 TELESCOPIC ARM TA.25 LENGTH 250 Arm extends to 400 PRONG ARM PA L x 8 Ø PA L x 8 Ø PA L x 8 Ø

37 PRODUCT INTERMEDIATE RAILS AND FITTINGS DATA SHEET NO 3.02 A range of INTERMEDIATE flat oval display rails and accessories, for location into Peerless uprights and posts. Designed for total flexibility, these rails are suitable for direct side hanging of merchandise, or as rear supports for forward facing arms using appropriate brackets. Alternative rail lengths are available on request to suit a variety of modular sizes. MDR.100 MDR.100 MDC MDC.01 MCC ARM PROFILE 15 RAIL PROFILE DISPLAY RAIL MDR.100 LENGTH 995 For use with uprights at 1000 centres MDR.120 LENGTH 1195 For use with uprights at 1200 centres DISPLAY Z RAIL MZR.100 LENGTH 995 For use with uprights at 1000 centres MZR.120 LENGTH 1195 For use with uprights at 1200 centres SUPPORT HOOK MSH.15 RAIL SUPPORT BRACKET MDC.02 Left hand MDC.03 Right hand RAIL SUPPORT COLLAR MDC.01 COLLAR CAP MCC.01 For use with MDC.01 and MDC.30 RAIL END CAP MEC.00 For location into ends of INTERMEDIATE rails PRONG ARM MPA L x 8 Ø MPA L x 8 Ø MPA L x 8 Ø MSC.13 MSC.10 MSC.11 MSC.12 EXTENDED RAIL SUPPORT BRACKET LENGTH 300 MDC.32 Left hand MDC.33 Right hand EXTENDED RAIL SUPPORT COLLAR MDC.30 LENGTH 300 RAIL SIDE CUP MSC.10 For location into uprights with slots recessed 1mm MSC.11 For location into uprights with slots recessed 8mm MSC.12 For location into uprights with slots recessed 11mm MSC.13 Face fixed HAT ARM HA.20 For location directly into uprights FORWARD ARM MFA.35 LENGTH 350 STEPPED ARM MSA.35 LENGTH 350 RAKED ARM MRA.12 (12 PIN) BALL ARM BA.20 Available to order to suit all Peerless rails

38 PRODUCT FINE RAILS AND FITTINGS DATA SHEET NO 3.03 A range of FINE flat oval display rails and accessories, for location into Peerless uprights and posts. Designed for total flexibility, these rails are suitable for direct side hanging of merchandise, or as rear supports for forward facing arms using appropriate brackets. Alternative rail lengths are available on request to suit a variety of modular sizes. FDR.100 FDC.05 FCC ARM PROFILE RAIL PROFILE FSC.10 FSC.11 FSC.12 FSC.13 RAIL SIDE CUP FSC.10 For location into uprights with slots recessed 1mm FSC.11 For location into uprights with slots recessed 8mm FSC.12 For location into uprights with slots recessed 11mm FSC.13 Face fixed DISPLAY Z RAIL FZR L For use with uprights at 1000 centres RAIL SUPPORT COLLAR FDC.05 RAIL SUPPORT CUP FDC.02 L/H FDC.03 R/H COLLAR CAP FCC.01 For FDC.05 and FDC.35 RAIL END CAP FEC.01 For location into ends of FINE rails FDC.23 FDC.35 DISPLAY RAIL FDR L For use with uprights at 1000 centres BARREL SHELF CLIP US.06 PROJECTION 40 For use with FDC.23 or FDC.35 EXTENDED RAIL SUPPORT COLLAR FDC L FDC L EXTENDED RAIL SUPPORT CUP FDC.32 L/H FDC.33 R/H 300L SUPPORT HOOK FSH.10 FFA.08D FFA.08 DISPLAY PEG FFA.08 FFA.08D 80L PRONG ARM FPA L x 8Ø FPA L x 8Ø CAPPED PRONG FCPA L x 8Ø FCPA L x 8Ø HOOK ARM FHA L x 5Ø FHA L x 5Ø EUROHOOK FDA L FDA L FRA.12D FRA.12 FSA.35D FSA.35 FFA.25D/35D FFA.25/35 FTA.45D FTA.45 RAKED ARM FRA.12 (12 PIN) FRA.12D STEPPED ARM FSA L FSA.35D 350L FORWARD ARM FFA L FFA L FFA.25D 250L FFA.35D 350L TWO WAY ARM FTA L x 250 FTA.45D 450L x 250

39 DATA SHEET NO 3.04 PRODUCT ONE PIECE DISPLAY RAILS STANDARD, INTERMEDIATE and FINE flat oval display rails are available as one piece fittings complete with brackets. Display rails are suitable for side hanging of merchandise, whilst rear versions accommodate forward facing arms. Z rails offer a combination of side and forward hanging. Alternative rail lengths are available to order to suit upright centres DISPLAY RAIL REAR DISPLAY RAIL DISPLAY Z RAIL LEFT HAND RIGHT HAND 10 FINE DISPLAY RAILS 35 FUDR.100 FURR.100 FUZR.100L FUZR.100R DISPLAY RAIL REAR DISPLAY RAIL DISPLAY Z RAIL LEFT HAND DISPLAY Z RAIL RIGHT HAND RAIL CODES ENDING 100 RAIL LENGTH 1000 nominal, for location into uprights with slots at 1000 working centres 15 INTERMEDIATE DISPLAY RAILS 40 MUDR.100 DISPLAY RAIL MURR.100 REAR DISPLAY RAIL MUZR.100L DISPLAY Z RAIL LEFT HAND MUZR.100R DISPLAY Z RAIL RIGHT HAND MUDR.120 DISPLAY RAIL MURR.120 REAR DISPLAY RAIL MUZR.120L DISPLAY Z RAIL LEFT HAND MUZR.120R DISPLAY Z RAIL RIGHT HAND RAIL CODES ENDING 120 RAIL LENGTH 1200 nominal, for location into uprights with slots at 1200 working centres 20 STANDARD DISPLAY RAILS 45 UDR.100 URR.100 UZR.100L UZR.100R UDR.120 URR.120 UZR.120L UZR.120R DISPLAY RAIL REAR DISPLAY RAIL DISPLAY Z RAIL LEFT HAND DISPLAY Z RAIL RIGHT HAND DISPLAY RAIL REAR DISPLAY RAIL DISPLAY Z RAIL LEFT HAND DISPLAY Z RAIL RIGHT HAND

40 PRODUCT RECTANGULAR RAILS AND FITTINGS DATA SHEET NO 3.05 A range of Rectangular display rails and fittings for use with Peerless uprights and posts. Regular rail lengths are offered for location into uprights with working centres at either 1000 or Versions with inset brackets are available for location into uprights with working centres at either 500 or 600. Alternative lengths to order. Rails are suitable for side hanging or forward facing merchandise REAR DISPLAY RAIL RURR.100 LENGTH 1003 RURR.120 LENGTH 1203 DISPLAY RAIL RUDR.100 LENGTH 1003 RUDR.120 LENGTH 1203 ARM PROFILE RAIL PROFILE RIFA.30/40 RIFA.30D/40D RIRA.12 RIRA.12D REAR DISPLAY RAIL RIRR.100 LENGTH 995 RIRR.120 LENGTH 1195 with inset brackets DISPLAY RAIL RIDR.100 LENGTH 995 RIDR.120 LENGTH 1195 with inset brackets FORWARD ARM RIFA.30 LENGTH 300 RIFA.40 LENGTH 400 RIFA.30D LENGTH 300 RIFA.40D LENGTH 400 RISA.40 RISA.40D RITA.50 RITA.50D RAKED ARM RIRA.12 (12 PIN) RIRA.12D (12 PIN) LEFT HAND STEPPED ARM RISA.40 LENGTH 400 RISA.40D LENGTH 400 TWO WAY ARM RITA.50 LENGTH 500 x 270 RITA.50D LENGTH 500 x 270 RIGHT HAND RIFA.08D RIFA.08 DISPLAY 'Z' RAIL RUZR.100 L LENGTH 1003 Left Hand RUZR.100 R LENGTH 1003 Right Hand RUZR.120 L LENGTH 1203 Left Hand RUZR.120 R LENGTH 1203 Right Hand SUPPORT HOOK RSH.10 PRONG ARM RPA.15 LENGTH 150 x 8 Ø RPA.23 LENGTH 230 x 8 Ø DISPLAY PEG RIFA.08 LENGTH 80 RIFA.08D LENGTH 80

41 DATA SHEET NO 3.06 PRODUCT FOIL RAIL AND FLAT BLADE FITTINGS A range of Rectangular display rails and associated flat blade fittings, for universal use with our rear mounted single slot verticals. Standard rail lengths are offered for location onto verticals at either 500 or 600 centres, for side hanging or forward facing merchandise. These flat blade fittings are constructed from 3mm thick mild steel and may be used in conjunction with our Rectangular shelf brackets illustrated on separate data sheets. 10 BDC.05 REAR RAIL ASSEMBLY BFA BDR.100 BDC.05 BPA.15 BPA.15 BPA.15 BFA.29 Adjustable Tensioner RAIL PROFILE rails are notched to locate onto support brackets at specific centres BDC.30 BDC.30 DISPLAY RAIL ASSEMBLY BDR.100 or BDR.120 RAIL SUPPORT BRACKET BDC.05 includes tensioner EXTENDED RAIL SUPPORT BRACKET BDC.30 LENGTH 300 includes tensioner DISPLAY RAILS BDR.100 LENGTH 990 notched for bracket 500 centres BDR.120 LENGTH 1190 notched for bracket 600 centres Includes rail end caps. Alternative lengths to order. RAIL PRONG ARM BPA.15 LENGTH 150 RAIL FORWARD ARM BFA.29 LENGTH 300 GLASS SHELF PLASTIC SADDLE GS.05 FORWARD ARM BFA.30 LENGTH 300 BFA.35 LENGTH 350 DISPLAY PEG BFA.08 LENGTH 80 DUAL RAIL / SHELF BRACKET BDB.30 LENGTH 300 for combined shelf with side hanging DUAL ARM / SHELF BRACKET BDA.35 LENGTH 350 for combined shelf with forward hanging STEPPED ARM BSA.35 LENGTH 350 RAKED ARM BRA.12 (12 PIN) 20 slope

42 DATA SHEET NO 4.01 PRODUCT FERRULE RANGE A range of ferrules are available for light, medium and heavy duty applications. Supplied loose for mounting into timber panels or posts, ferrules are designed to receive a range of display prongs and fittings. Further information on standard accessories are illustrated within data sheets. Custom fabricated fittings are available to order. All dimensions are nominal and not to be used for precise setting out purposes. QUARTZ MEDIUM DUTY FERRULE CPP.18 (See data sheet 4.04) QUARTZ MEDIUM DUTY FERRULE CPP.28 (See data sheet 4.05) HEAVY DUTY FERRULE CPP.14 (See data sheet 4.02) CAP FERRULE CPF.M10 - M10 Thread CPF.M8 - M8 Thread (See data sheet 4.06) M8 or M10 FERRULE CSF.M10 FPF.M10 - Recessed M10 Thread - Countersunk head - Flat head CPF.M10 CPF.M M10 11 FERRULE CSF.M8 FPF.M8 - Recessed M8 Thread - Countersunk head - Flat head CSF.M10 FPF.M M8 9 FERRULE CSF.M6 FPF.M6 - Recessed M6 Thread - Countersunk head - Flat head 9 CSF.M8 FPF.M M6 7 CSF.M6 FPF.M6

43 PRODUCT HD FERRULE AND FITTINGS DATA SHEET NO 4.02 HD heavy duty ferrules are available for use in perimeter or island locations. Ferrules are supplied loose or prefitted into timber panels or other fixtures to suit customers specification. All measurements on arms and rods are visible projection from face of CPP.14 Ferrule. Support rods and arms illustrated below are available with an optional friction fit for a secure location in ferrules. Components are not suitable for Powder Coating. CPP.14 HPR.M8 FRA.12 PDC.30 PZR.100 CPP.14 HD FERRULE LENGTH - 50 For face fixing into timber panels or posts, using heavy duty adhesive. A minimum timber thickness of 50mm is required to hold the ferrule securely. Ferrules should be fitted at 1 uprake in accordance with our installation sheet. PDC.30 HPP.30 PDR.100 HPR.M8 10 FORWARD ARM HCP.30 LENGTH 300 HCP.35 LENGTH 350 SHELF SUPPORT ROD HPP.30 LENGTH 300 HPP.35 LENGTH 350 Shelves are fitted using GS.14 or TS.14 illustrated Fine display rails and accessories are available for location into ferrules at specified centres using support rods and screws. Alternative lengths available to order. DISPLAY RAIL PDR.100 LENGTH 995 For fixing in ferrules at specified centres. RAKED SHELF SUPPORT ROD HRP.30 LENGTH 300 SHELF CLIP TS.14 To suit 14 mm arms. For use with timber shelves. SHELF WASHER GS.14 To suit 14 mm arms. For use with glass shelves. DISPLAY RAIL SCREW HPR.M8 LENGTH 22 Z DISPLAY RAIL PZR.100 LENGTH 995 For fixing in ferrules at specified centres. DISPLAY RAIL SUPPORT ROD PDC.01 LENGTH 30 EXTENDED DISPLAY RAIL SUPPORT ROD PDC.30 LENGTH 310

44 PRODUCT CIRCULAR RAILS AND FITTINGS A range of display rails are available constructed from round tube and designed for use with uprights or CPP.14 ferrules, using fittings illustrated. All measurements on arms and rods are visible projection from face of CPP.14 Ferrule. CRR.100 CFA.30 CHR.100 CHA.30 CDA.35 DATA SHEET NO 4.03 DISPLAY RAIL CDR.100 / CDRD.100 LENGTH 995 For use with extended and dual support rods at specified centres. REAR DISPLAY RAIL CRR.100 LENGTH 995 For use with support rods to accept forward and raked arms at specified centres. HIGH DISPLAY RAIL CHR.100 LENGTH 995 For use with support rods to accept high forward arms at specified centres. CDRD.100 CDC.30 CDR.100 GS.14 CDC.30 RAIL SUPPORT ROD CDC.01 LENGTH 50 For direct location into uprights. CDC.05 LENGTH 50 For direct location into CPP.14 ferrules. EXTENDED RAIL AND SHELF SUPPORT ROD CDC.30 LENGTH 320 For location into uprights. CDC.35 LENGTH 320 For location into CPP.14 ferrules. DUAL SUPPORT ROD CDA.35 LENGTH 350 CDA.40 LENGTH 400 For location into CPP.14 ferrules NOTE Shelf rods to be used with either GS.14 washers or TS.14 clips FORWARD ARM CFA.30 LENGTH 300 CFA.40 LENGTH 400 HIGH FORWARD ARM CHA.30 LENGTH 300 CHA.40 LENGTH 400 RAKED ARM CRA.12 (13 PIN)

45 DATA SHEET NO 4.04 PRODUCT QUARTZ FERRULES AND FITTINGS 2 sets of WU.28 wall fixing brackets are supplied per panel QUARTZ medium duty ferrules are available for use within a variety of perimeter and island display applications. Supplied loose for mounting into timber panels or posts, ferrules should be bonded securely to prevent rotation or movement. QTA.49 CPN QFA.08 QDR.100 QDD.30 QRA.12 QDR.100 QDU.30 QDR.100 QDC.30 QSA.35 CPP.18 QUARTZ ROUND FERRULE Ferrules used with optional CPN.18 rear nut & washer are recommended to be housed within 38mm minimum depth of timber including appropriate packers as required. For ferrules used alone, 50mm depth of timber is advisable to achieve optimum strength when bonded. Note: Snug holes to receive ferrules should always be drilled consistently using an accurate jigging method. GS.18 GS.18 NUT / WASHER SET CPN.18 QFA.30 PF.13 QDC.30 QDR.100 (connection detail) QPP.30 GS.18 SHELF SUPPORT RODS QPP.20 LENGTH 200 x 18 Ø QPP.25 LENGTH 250 x 18 Ø QPP.30 LENGTH 300 x 18 Ø QPP.35 LENGTH 350 x 18 Ø For support of glass shelves using GS.18 washers. (order separately) SHELF WASHER GS.18 QFK.01 KEY TOOL Jigging tool to aid fixing of ferrules. QDD.30 QDU.30 QDC.30 DISPLAY RAIL QDR.100 LENGTH 995 x 32 Ø For location onto support rods. Other lengths available to order. FORWARD ARMS QFA.08 LENGTH 80 x 18 Ø QFA.30 LENGTH 300 x 18 Ø QFA.35 LENGTH 350 x 18 Ø 18 Ø round tube DISPLAY RAIL SUPPORT RODS QDC.30 LENGTH 300 x 18 Ø Straight rod support. QDD.30 LENGTH 300 x 18 Ø Curved rod for downward support. QDU.30 LENGTH 300 x 18 Ø Curved rod for upward support. TWO WAY ARM QTA.49 LENGTH 490 x 300 STEPPED ARM QSA.35 LENGTH 350 RAKED ARM QRA.12 (12 PIN)

46 DATA SHEET NO 4.05 PRODUCT QUARTZ FERRULES AND FITTINGS 2 sets of WU.28 wall fixing brackets are supplied per panel QUARTZ medium duty ferrules are available for use within a variety of perimeter and island display applications. Supplied loose for mounting into timber panels or posts, ferrules should be bonded securely to prevent rotation or movement. CPN QSSA.35 QUDR.100 CPP.28 QUARTZ SQUARE FERRULE QSFA.08 QSTA.49 QSFA.35 Ferrules used with optional CPN.18 rear nut & washer are recommended to be housed within 38mm minimum depth of timber including appropriate packers as required. For ferrules used alone, 50mm depth of timber is advisable to achieve optimum strength when bonded. Note: Snug holes to receive ferrules should always be drilled consistently using an accurate jigging method. GS x 20 square section tube NUT / WASHER SET CPN.18 QSPP.30 GS.11 PF.03 GS.11 SHELF SUPPORT RODS SHELF STUDS QSPP.30 LENGTH 300 GS.11 QSPP.35 LENGTH 350 For support of glass shelves using GS.11 studs (order separately) QFK.01 KEY TOOL Jigging tool to aid fixing of ferrules. DISPLAY RAIL QUDR.100 LENGTH 995 x 300 FORWARD ARMS QSFA.08 LENGTH 80 QSFA.30 LENGTH 300 QSFA.35 LENGTH 350 TWO WAY ARMS QSTA.49 LENGTH 490 x 300 PANEL FOOT PF.13 Round LENGTH 100 PANEL FOOT PF.03 Square LENGTH 100 PANEL FOOT PF.01 Adjustable STEPPED ARM QSSA.35 LENGTH 350

47 PRODUCT CAP FERRULE AND FITTINGS DATA SHEET NO 4.06 The panel prong system offers a versatile and attractive alternative to slatted wall systems. Ferrules are supplied for mounting into 18mm minimum timber panels and designed to receive a range of display fittings for perimeter or free standing locations. Ferrules are available loose or pre-fitted into custom made panels to suit customers specified finishes and dimensions. PDR.100 PDR.M10 PGS.M10 GS.10 CAP FERRULE CPF.M8 LENGTH 20 CPF.M10 LENGTH 20 For face fixing into panels using heavy duty adhesive to prevent rotation or movement FIXING SCREW WASHER SET FSW.M6 Optional extra screw washer set, to locate into rear of ferrule for additional support CP.15 GRAPHIC PANEL SCREW PGS.M10 LENGTH 15 GRAPHIC PANEL SCREW PGS.M8 LENGTH 15 CPF.M10 PDR.100 FINE DISPLAY RAIL Fine Display rails are available to order in various lengths for fixing directly into ferrules at specified centres. See other data sheets for fine rails and prongs. SHELF CLIP TS.08 To suit M8 prongs TS.10 To suit M10 prongs For use with timber shelves SHELF WASHER GS.08 To suit M8 prongs GS.10 To suit M10 prongs For use with glass shelves DISPLAY RAIL FIXING SCREW PDR.M8 LENGTH 30 PDR.M10 LENGTH 30 PANEL PRONG PP.15 M8 150L x 8 Ø PP.15 M10 150L x 10 Ø PP.25 M8 250L x 8 Ø PP.25 M10 250L x 10 Ø CAPPED PRONG CP.15 M8 150L x 8 Ø CP.15 M10 150L x 10 Ø CP.25 M8 250L x 8 Ø CP.25 M10 250L x 10 Ø STEPPED PRONG SP.15 M8 150L x 8 Ø SP.15 M10 150L x 10 Ø SP.25 M8 250L x 8 Ø SP.25 M10 250L x 10 Ø BAG PRONG (4 HOOK) BP.04 M8 280L x 8 Ø BP.04 M10 280L x 10 Ø RAKED PRONG (8 PIN) RP.08 M8 200L x 8 Ø RP.08 M10 200L x 10 Ø HOOP PRONG HP.15 M8 150L x 60 Ø x 8 Ø HP.15 M10 150L x 60 Ø x 10 Ø

48 DATA SHEET NO 4.07 PRODUCT rpuc FERRULE AND BLADE FITTINGS 6* RF.01 rpuc FERRULE rpuc rectangular heavy duty ferrules for perimeter and mid floor applications. Ferrule assemblies should be mounted into timber panels, including appropriate vertical packers to achieve an overall thickness of 36-38mm. Snug rectangular holes for ferrules should be machined using accurate CNC or jigging methods. Secure assemblies firmly from rear. rpuc BLADE fittings are illustrated on the following data sheet. RPSA.35 RPFA.08 NOM FERRULE ASSEMBLY *allow 6mm clearance at rear of ferrule for plug-in fittings. RPFA.08 RPPB.25 RPRA.12 RPTS.60 RPPB.25 RPTA.48 RPGS.08 RPDA.30 RPFA.40 RPDR.60 RPDC.01 RPRA.25 RPRP.15 RPTA.28 RPGS.08 RPDR.120 RPDB.30 RPCB RPGS.08 RPSB.40 RPDR.60 RPDC RPFB.01 RPAB ARM PROFILE 400L arms are 25 high RAIL PROFILE FERRULE PROFILE

49 PRODUCT rpuc BLADE FITTINGS DATA SHEET NO 4.08 The unique rpuc BLADE fittings offer a pure range of contemporary accessories to locate into rpuc ferrules. DUAL RAIL / SHELF SUPPORT BRACKET RPDB.30 LENGTH 300 EXTENDED RAIL SUPPORT BRACKET RPDC.30 LENGTH 300 RAIL SUPPORT BRACKET RPDC.01 LENGTH 40 RAIL ARM RPRA.25 LENGTH 250 RAIL PRONG RPRP.15 LENGTH 150 Rail support brackets slide over rails without the need to remove rail end caps. Rail arms and prongs are designed to slide over rails without the need to remove rail end caps. DISPLAY RAILS RPDR.60 LENGTH 590 RPDR.100 LENGTH 990 RPDR.120 LENGTH 1190 Includes rail end caps. Alternative lengths to order TWO WAY DISPLAY RAIL RPTA.48 LENGTH 480 x 300 Includes rail end caps. TWO WAY ARM RPTA.28 LENGTH 280 x 300 RPFA.08 RPFA.30T/40T RPFA.30/40 STEPPED ARM RPSA.35 LENGTH 350 RAKED ARM RPRA.12 LENGTH 315 (12 NOTCH) DUAL ARM / SHELF SUPPORT BRACKET RPDA.30 LENGTH 300 SS.M6 GS.04 GS.01 FORWARD ARMS / PEG RPFA.08 PEG LENGTH 80 RPFA.30 ARM LENGTH 300 RPFA.40 ARM LENGTH 400 RPFA.30T ARM LENGTH 300 RPFA.40T ARM LENGTH 400 RPFB.01 SHELF BRACKET RPSB.25 LENGTH 250 RPSB.30 LENGTH 300 RPSB.40 LENGTH 400 Use with plastic saddles or support bosses SLOPING SHELF BRACKET RPAB.30 LENGTH 315 x 20 Use with support bosses SHELF SUPPORT BOSS GLASS SHELF RPFB.01 PLASTIC SADDLE PROJECTION 10 RPGS.08 Use with GS.01 plastic studs or SS.M6 screws & GS.04 washers REAR PATCH GLASS SHELF BRACKET SET RPPB.07 Includes 2 No screws for 8mm thick glass DISPLAY SHELF BRACKET RPPB.25 LENGTH 250 Use with relevant screws SHELF CLAMP BRACKET RPCB.06 Includes 2 No saddles for support of 6mm thick shelves REAR PATCH BRACKET RPPB.06 Includes 2 No screws for 18-20mm thick shelves TIMBER SHELF RPTS L x 350W Includes RPPB.06 patch bracket