Low-cost technology for draft animals
|
|
- Darlene Powers
- 5 years ago
- Views:
Transcription
1 Low-cost technology for draft animals TRAINING OF COWS FOR DRAFT Location: Kangwon Province, Korea A heifer about one year old is trained to be a draft cow. It is fitted with a yoke connected with chains to a kg log. Draft cows are mainly used for pulling carts in Korea. Existing carts are not suitable for training, since they are too big and too easily damaged. Hence, fitting cows with logs can help train them for this purpose (Fig. 1). It does not need any specific techniques and materials. It is easy to find open spaces for the training: fallow idle land and pasture, for instance. Spectators should not be around the training area, for safety reasons. The weight of the logs and the period of training must be adjusted according to the cow s abaility. Women or old men are not recommended as trainers since physical strength is needed to control untrained cows. Training should not take place in very hot or cold weather. Fig. 1. To train a heifer for work, a kg log is attached with chains to the yoke and dragged by the cow 1
2 RAKE FOR PADDY SOILS Location: Surin Province, Thailand A piece of 150 x 5 x 7 cm hardwood (A), is perpendicularly attached to pieces of bamboo or soft timber (B). One piece of softwood timber (C) is laid and secured to the other end of B to make a handle. Pieces of softwood timber (D) are secured to both ends of A. Holes are drilled through timber A at regular intervals, through which pieces of smaller hardwood timber A are stuck, making a comb-like structure (Fig. 2). In land preparation for paddy planting after the land has been ploughed and flooded, all grasses and weeds that have been uprooted must be removed by raking. This traditional tool is often used in Thailand, and is very efficient. The contraption is harnessed to a draft animal such as a water buffalo and pulled through a wet or dry paddy field (Fig. 3). The rake is said to work better in flooded paddy fields. The teeth of the comb-like structure may have to be replaced fairly often, depending on the soil type. Fig. 2. A wooden rake. Fig. 3. The rake, harnessed to a draft animal, helps to uproot weeds and grasses. 2
3 WOODEN PLOW Location: Mahasarakarm Province, Thailand The wooden plow is constructed as follows (Fig. 4). A branch of a hardwood tree, A, is carved into the shape shown in Fig. 1. Another branch of hardwood, B, is also carved out. B is then inserted into A through a slot. Another piece of hardwood is also carved with a big slot, through which one end of A is inserted and secured tightly. A piece of steel, D, is then fitted to C, thus forming a plow. A piece of rope is inserted through a hole at E. This is then connected to the yoke of a water buffalo (Fig. 5). The first operation in paddy land preparation is plowing to turn the topsoil. This eliminates the weeds and grasses that may compete with the young rice plants. The device mentioned here can help farmers do the plowing. The plow can be controlled by the farmer via the handle and the animal. Two water buffaloes may be teamed up to pull a plow with a larger steel blade. The plow works better when the field is soft and the soil is flooded. The draft animals should be put to work a few hours in the morning and late afternoon to avoid heat stress. They should be left to graze or rest during the hot part of the day. While plowing, it is advisable to avoid large rocks or stumps as the animals will readily get exhausted if forced to pull a plow that gets caught in boulders or tree stumps. The device can be made of steel. Fig. 4. Wooden plow. Fig. 5. Plow connected to the yoke of a buffalo helps farmers prepare the land for planting. 3
4 WOODEN CART WHEEL Location: Mahasarakarm Province, Thailand Planks of hardwood timber (A) about 3 to 4 cm thick are cut into sections. When joined together end to end, a complete ring is formed. Each of the planks has two slots. A wooden spoke (B) is inserted into each end of the spoke with the other end inserted into a slot at the hub (C). The total number of slots on the hub should be the same as the total number of slots on the wooden ring, which is joined to the planks (A) (Fig. 6). A ring of steel (D) with the same width as the plank s thickness and nearly the same diameter as the wooden wheel is then heated and forged over the wooden wheel to increase its strength. A hole about 4 cm diameter is drilled through the hub. A large steel rod is then inserted through the hole, thus forming an axle when inserted through the two wheels. A chassis is fitted over the axle and a draw bar is attached. The cart is then ready as a utility vehicle. During the time when engines were not available or too expensive for the farmers, carts were used extensively and swamp buffaloes provided power to move the vehicle. Wooden carts are used to transport agricultural products through paddy fields where no road is available (Fig. 7). It seems towork fairly well on soft ground. The vehicle is rather slow, but the objective of transporting heavy goods from one place to another is met. The farmer must not drive the animals to exhaustion and should not overload the cart. Used tires can replace the wooden wheels. Fig. 6. Wooden cart. Fig. 7. The cart is useful for transporting produce from the field to the farmhouse or to market 4
5 MUZZLE BAG FOR WORKING ANIMALS Location: Philippines The method involves covering the muzzle of a working ox or buffalo with a small basket or bag (Fig. 8). The bag permits the animal to breathe freely, but prevents his mouth from opening while plowing or harrowing. It also prevents him from causing damage to crops by eating them while working. In this way, the animal devotes its full attention to its work. During plowing or soil cultivation, draft animals take any opportunity to grab planted crops or graze while pulling the plow. This results in damage to crops and work delay, because the animal has to stop to feed. The use of muzzle bags is popular in upland or slopeland areas where draft animals are used to plow or cultivate the land. It minimizes damage to crops, and allows the work animals to concentrate on plowing without disturbance, and therefore use their work time efficiently. Initially, the presence of the contraption will annoy the work animal. Also, the basket or bag will limit the movement of the mouth and tongue while working. This may cause discomfort for the animal during regurgitation or rumination. The most practical purpose of the basket or bag is to prevent the animal from grazing what is already planted in the fields. The problem is common during the hilling up of soil in cornfields. The basket or bag used should allow the animal to breathe comfortably and move his jaws freely. While the animal is at rest, the basket must be removed to allow the animal to graze or drink during break time. Fig. 8. In the Philippines, to prevent the work animal from grazing while plowing, a basket or bag is placed over its muzzle. 5
6 SUGARCANE JUICE EXTRACTOR Location: Burirum Province, Thailand Three pieces of hardwood (A, B and C) are shaped into barrels with identical diameters and height, and fitted with wooden cogs. The two barrels (A and C) are fitted with axles and sandwiched between two heavy pieces of timber (Fig. 9). The barrel B is fitted with a large shaft, which in turn is fitted with a fairly long yoke. Therefore if one barrel is turned, the other two barrels will also turn. A buffalo cart can transport only relatively small amounts of sugarcane very slowly. It is far better to extract the sugarcane juice and manufacture brown sugar in the field, than carry the bulky sugarcane stalks to a factory in a distant village. This juice extractor will therefore come in handy in field situations (Fig. 10). A buffalo carries the free end of the yoke and is led to walk in a circle around the contraption that is anchored to the ground. This turns barrel B which also turns the other two barrels, A and C, at the same time. Stalks of sugarcane are then fed and crushed between the rolling barrels, yielding sugarcane juice that is collected in buckets as it flows into the wooden channel. The contraption should be anchored securely to the ground and a well-trained buffalo should be used. The animal should be let free to graze and rest during the hot part of the day. The sugarcane juice should be boiled down very soon. If there is any delay, fermentation of the liquid is likely to begin, especially in hot and humid areas. Fig. 9. Sugarcane juice extractor. Fig. 10. Used out in the field, it frees farmers from the labor of hauling bulky sugarcane stalks to the factory for processing
7 DRAG CARTS FOR MUDDY AREAS Location: Philippines The use of carts pulled by draft animals like cattle and water buffalo is still very popular in the Philippines (Fig. 11 and Fig. 12). Such carts are used to transport loads such as farm products,logs, bamboo, soil/clay, planting materials or even people. Animal-drawn carts facilitate farm mobility and transport. Depending on the design and terrain, some carts can have either tires or wooden wheels. On muddy paths, sleds without wheels are simply dragged. The design of carts varies with the kind of load and terrain. In steeplands or waterlogged areas, the use of draft animals is practical. Animals are able to train themselves to move through rugged or marshy terrain on dirt tracks. Animal-drawn carts used to transport loads give farmers mobility in rough terrain. They do not cause any pollution, and are relatively inexpensive. Animals are a natural source of draft power. Their maintenance requirements are relatively low. Even with the advent of modern farming, the use of animal power and locally designed carts is practical. Such carts serve their purpose of transporting loads from the farm to places where they are utilized or further transported. Fig.11. Sled constructed of hardwood Fig. 12. Boat-shapped sled
DTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 25 LIGHT STEEL AND WOOD DONKEY CART RELEASE Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)203 523523
More informationWORK STATION DESIGN AND WORK TOOLS
WORK STATION DESIGN AND WORK TOOLS As well as on the farm, farmers and their families are working at in-house workplaces. They have to sort and pack agricultural products, and also do cooking and other
More informationDTU. 27 Single Donkey Harness for Cart Pulling. Animal Cart Programme KENDAT
DTU KENDAT Animal Cart Programme TECHNICAL 27 Single Donkey Harness for Cart Pulling RELEASE Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44
More informationQuestion : Exercise 3. Following are the car parking charges near a railway station up to: 4 hours 0 8 hours 00 2 hours 40 24 hours 80 Check if the parking charges are in direct proportion to the parking
More informationDTU. 50 Wooden Double Donkey Harness for Cart Pulling. Animal Cart Programme KENDAT
DTU KENDAT Animal Cart Programme TECHNICAL 50 Wooden Double Donkey Harness for Cart Pulling RELEASE Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK,
More informationLOG SPLITTER PROJECT REFERENCE NO. : 37S0913
LOG SPLITTER PROJECT REFERENCE NO. : 37S0913 COLLEGE : SRINIVAS INSTITUTE OF TECHNOLOGY, MANGALORE BRANCH : MECHANICAL ENGINEERING GUIDE : SADASHIV LALASANGI STUDENTS : SANKESH RAFATH ABDUL RAZAK B E VACHAN
More informationSECTION 2. AMERICAN Pipe Joints
SECTION 2 AMERICAN Pipe Joints The AMERICAN Fastite Joint is a pushon type joint meeting all the rigorous requirements of AWWA C111. The ANSI/AWWA C600 Standard covers in detail the installation of ductile
More informationDTU 26 LOW-COST STEEL & WOOD OX CART. Animal Cart Programme D T U
DTU D T U Animal Cart Programme TECHNICAL 26 LOW-COST STEEL & WOOD OX CART RELEASE Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203
More informationTYPES OF FENCING FOR GOATS. Steve Hart. E (Kika) de la Garza Institute for Goat Research Langston University Langston, Oklahoma
TYPES OF FENCING FOR GOATS Steve Hart E (Kika) de la Garza Institute for Goat Research Langston University Langston, Oklahoma 73050 Introduction Anyone that has goats knows that fencing them in is one
More informationBarrel and Tire Mineral Feeder Construction Instructions
Barrel and Tire Mineral Feeder Construction Instructions Dr. Matt Poore Department of Animal Science NCCE, NCSU Following is a description of how you assemble one of these barrel and tire feeders and accompanying
More informationHigh Wheel Cultivator Model HWC-243A
High Wheel Cultivator Model HWC-243A Owner s Manual and Parts List SAVE THIS MANUAL You will need this manual for the safety instructions, assembly instructions and parts list. Put it in a safe, dry place
More information580A Automatic Cable Tying Machine 580A
Automatic Cable Tying Machine 580A Contenido Regular Information...3 Technical parameters:...5 Operation Instruction....6 Trouble Shooting....8 Maintenance....9 After-sales Service...9 Safety Instructions....10
More informationIFRC SHELTER TOOL KIT
IFRC SHELTER TOOL KIT PP ROPE ROPE, polypropylene, black, 12mm diam., twisted Diameter: 12mm +/- 0.5mm Length: 30m Weight: 1.9kg Number of strand: 3 minimum Type: twisted Material: polypropylene, no recycled
More informationMulchmaker for gardening buffs
Mulchmaker for gardening buffs By MANLY BANISTER ANY GARDENING BUFF knows the best way to fertilize the garden is with organic material and that the cheapest organic material is homegrown compost. Mulches
More informationELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0
ELECTRIC SLIP ROLL MACHINE Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 Operation Manual Table of contents I MAIN SPECIFICATION...2 II SAFETY INSTRUCTIONS.. 2 III OPERATION INSTRUCTIONS..4
More informationHOW TO BUILD A DEER OR ELK-PROOF FENCE. Saskatchewan Environment Resource Stewardship Branch 112 Research Drive Saskatoon, Saskatchewan S7K 2H6
HOW TO BUILD A DEER OR ELK-PROOF FENCE Saskatchewan Environment Resource Stewardship Branch 112 Research Drive Saskatoon, Saskatchewan S7K 2H6 Revised March 2005 1 This information is intended to assist
More informationNative Americans Seminole. SS 4H1: The students will describe how early native American cultures developed in North America
Native Americans Seminole SS 4H1: The students will describe how early native American cultures developed in North America Where did the Seminole Live? The Seminole Indians are original people of Georgia
More informationDrawing. Fig. 1 Drawing
Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet
More information" PLUG AERATOR. Model No. Safety Assembly Operation Maintenance Parts. CAUTION: Read Rules for Safe Operation and Instructions Carefully
owner s manual Model No. 45-0383 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts www.speedepart.com
More informationInstallation and Operating Instructions
Installation and Operating Instructions Autorobot Finland Oy, 2014 3-2014, Srj 8 EasyBoatRoller - Installing instructions 3 INSTALLATION INSTRUCTIONS Preparation work The shore does not necessarily need
More informationCustom 3-Point Seatbelt Installation Guide for: Corvette
Custom 3-Point Seatbelt Installation Guide for: 1963-67 Corvette Note: The information enclosed in this installation guide is to be used as merely an outline to assist you during the process of installation.
More informationDRILLING & WORKING TOOLS
EAGLE EQUIPMENT SUPPLIES & SERVICES PTE LTD 48 Toh Guan Road East #06-107 Enterprise Hub, Singapore 608586 Tel : (65) 6795 2411 Fax: (65) 6795 5877 Email: eesss@singnet.com.sg Company Registration (UEN)
More informationK Ramesh* et al ISSN International Journal for Research in Science & Advanced Technologies Volume-3, Issue-6,
DESIGN AND FABRICATION OF WEED REMOVING MACHINE K.RAMESH 1, G.TERENCE ANTO 2, S.MAHESWARAN 3, S.BIRUNDHA DEVI 4 1 (Asst.professor of Mech. Engineering, SNS College of Engineering, Coimbatore, India) 234
More informationINSTALLATION, ASSEMBLY & OPERATIONAL MANUAL
INSTALLATION, ASSEMBLY & OPERATIONAL MANUAL Dog Park Equipment Hill Climb, Balance Beam, Bridge Climb, Mini Hill Climb, Jump Hurdles, Tunnel House, Training Platform, Jump Balance Beam Safe Zone When installing
More informationGlaser Wheel Hoe Instruction Manual
Glaser Wheel Hoe Instruction Manual 955 Benton Ave., Winslow, ME 04901 Phone: 1-877-564-6697 Fax: 1-800-738-6314 Email: service@johnnyseeds.com Web Site: Johnnyseeds.com The wheel hoe is a lightweight,
More information2015 Ag Mechanics CDE Prelim Exam
Florida FFA Association ID: A 2015 Ag Mechanics CDE Prelim Exam Multiple Choice Identify the choice that best completes the statement or answers the question. Mark your answer choices on your answer form.
More informationDTU. 46 Straight Hame Collar for Donkey Harness. Animal Cart Programme KENDAT
DTU KENDAT Animal Cart Programme TECHNICAL 46 Straight Hame Collar for Donkey Harness RELEASE Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44
More informationBirds, Beaks, and Adaptations
Big River Journey Classroom Activity: Wetland Birds Objective: The student will learn and describe how different kinds of bird beaks have adapted to feed on different foods within a specific habitat. raisins
More informationSectors. Wire solutions adapted to all sectors. Construction
Sectors Wire solutions adapted to all sectors Construction We provide reliable solutions for the construction sector. We offer technical advice on erosion control, concrete reinforcement, fencing and others.
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationDesktop Trebuchet Kit Assembly Instructions
Desktop Trebuchet Kit Assembly Instructions Contents of package (drawings are not to scale for clarity, parts that have duplicates are indicated with total number of that part to be found, example: 2X
More informationST SHIPO DRILLING
ST 1.2.1 SHIPO DRILLING Version : 2 March 2014 Published by : Foundation Connect International Authors : Henk Holtslag & Walter Mgina Disclaimer This manual is part of the main manual, named ST 1 Wells.
More informationAssembly Instructions
& Infield Rascal Jr. Assembly Instructions As Of 9/20/2010 1 Rascal LGR & Infield Rascal Jr. Assembly Instructions 877.788.7253 www.abisupport.com Side View Rear View On behalf of Absolute Innovations,
More informationThreshing of Rice NARI TOKTOK RGP005. April National Agricultural Research Institute. Copies of this leaflet can be obtained from:
National Agricultural Research Institute Copies of this leaflet can be obtained from: The Publications Section National Agricultural Research Institute Wet Lowlands Mainland Programme PO Box 1639 LAE 411
More informationLumber Smith. Assembly Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Assembly Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 Step 1 Safety Carefully read the Owners Manual.
More informationCOJSAWBX Electric Jig Saw Assembly & Operating Instructions
COJSAWBX Electric Jig Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.
More informationSEATBELT SOLUTIONS, LLC.
Custom 3-Point Seatbelt Installation Guide for: 1963-67 Corvette Note: The information enclosed in this installation guide is to be used as merely an outline to assist you during the process of installation.
More informationEngineering Weld Symbols
Engineering Weld Symbols Working drawings present views of a workpiece in three ways: Plan Elevations Sections The plan view is as seen from above, looking down vertically. Elevations are side and/or end
More informationSectional HDD Reamer Package
Sectional HDD Reamer Package Recommended for Sand, Soft Soil, Sand Stone, Coral Mix and Gravel Carbides Internally welded leaving an external groove. Using a thin grinder blade, worn out carbides can be
More informationA day in the life of a charcoal burner
A day in the life of a charcoal burner Hi! My name is Sam Ansell and I am a coppice worker and charcoal burner. Coppicing A coppice worker is someone who looks after woods and trees in a special way called
More informationLog Hauler. Senior Design Project. Department of Mechanical Engineering Trevor Kline 4/19/2011
Log Hauler Senior Design Project Department of Mechanical Engineering Trevor Kline 4/19/2011 Table of Contents BACKGROUND:... 3 INSPIRATION:... 3 PROPOSAL AND REQUIREMENTS:... 4 DESIGN:... 4 LOG SIZE:...
More information1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward.
Figure 1 Miniature Quick Change Applicators, of the end feed type, are designed to crimp end feed strip terminals to prestripped wires. Each applicator is set up to accept the strip form of certain specific
More informationMechatronics in the Evolution of Our Agriculture
Seventh LACCEI Latin American and Caribbean Conference for Engineering and Technology (LACCEI 2009) Energy and Technology for the Americas: Education, Innovation, Technology and Practice June 2-5, 2009,
More informationConstructing Wire Fences
1 of 6 12/3/2010 9:48 AM University of Missouri Extension G1192, Reviewed October 1993 Constructing Wire Fences Richard E. Phillips Department of Agricultural Engineering This guide will provide some basic
More informationMy own personal suggestion is that you use native timbers for the construction of your Psaltery. These are often the cheapest and most economical.
In making this design freely available I am granting a license for you to make one for yourself or to sell. All I ask in kind is that you somewhere include the authorising label on this page as acknowledgement.
More informationAquaGuard - Water Resistant Flooring Installation guidelines
AquaGuard - Water Resistant Flooring Installation guidelines Before You Start: Please read all the instructions before you begin the installation. Improper installation will void the warranty. Important
More informationA H M 531 The Civil Engineering Center
Title Page Introduction 2 Objectives 2 Theory 2 Fitting 3 Turning 5 Shaping and Grinding 7 Milling 8 Conclusion 11 Reference 11 1 Introduction Machining Machining is a manufacturing process in which a
More informationOWNERS MANUAL. Model No " PLUG AERATOR. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. 45-0299 48" PLUG AERATOR CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com
More informationOXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE
OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 5 Quick Guide 6 In Depth Instructions 8 Operating Instructions 12
More informationUNPACK & ASSEMBLY. Done! CAUTION! THE MILL WILL BE VERY HEAVY - GET ASSISTANCE Pepe Tools.
PARTS DIAGRAM T Bar Height adjustment Wooden hand grip Height adjustment gears Frame Height adjustment screws Top roller End Gears cover Handle Brass Bushes (Each side) Bottom roller 4:1 Gearbox Mounting
More informationProject Documentation
Project Documentation Precision Planter Prototype Summaries, How To Build, Next Steps D Kar Botswana, August September 2017 Mathambo Ngakaeaja, Stephanie Lew, Alex Wilder, Thabiso Mashaba, Nico Barkard
More informationVisualization & construction of simple rotors for micro wind turbines
Visualization & construction of simple rotors for micro wind turbines John, Jafar & friends - 2002-2003 BLADE CARVING Friends: It has been our objective to conduct research into "construction and
More informationQuick Set Dovetail Jig
Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT
More information1 INTRODUCTION. 2. LITERATURE REVIEW 2.1 Literature Review Summary. 3 DATA COLLECTION & ANALYSIS 3.1 Product Study
Design and Development of a Pepper Plucking Equipment to Facilitate Pepper Harvesting Rahul M. 1, Prakash V. Unakal 2, Gopinath C. 3 1- M. Sc. [Engg.], Student, 2-Former Professor, 3- HOD, Department of
More information(Watertown, SD)
A Notes updated and cosmetic changes REV ph: 1.800.447.2781 DESC / PAGE NUMBERS AFFECTED fax: 903.957.0015 (Sherman, TX) 101911 DATE email: augertools@terex.com Rev 09/13/11 Spin-Bottom, Drill Bucket 3/4
More informationgarlic pepper tomato onion lime
Salsa Vegetableseta garlic pepper tomato onion lime Permission granted to copy student pages for purchaser s class. Life Science, Part 2: BLM 1 Station 1. 2. Use your senses to observe the seeds, the tomato,
More informationHANDLING THE WAX FROM HONEY COMBS*
HANDLING THE WAX FROM HONEY COMBS* G.F. TOWNSEND, CANADA Cappings Cappings are obtained when the waxen surface is removed from honeycombs prior to extracting the honey. Where eight or nine frames are used
More informationPRO Brake Operating Instructions
PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality
More informationBENEFITS SOIL CORE SAMPLERS P1.04. Soil core samplers (gouges)
After a sample has been taken with the gouge auger, it is pulled up using the push-/pull handle. Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product
More informationINSTALLATION MANUAL. 2. Check with local utility companies for locations of underground cables or pipe lines.
INSTALLATION MANUAL Install our maintenance free fencing system yourself! About 90% of our residential clientele install our fencing systems themselves. Why hire and pay someone to install it when you
More informationZ14 MANUAL TÉCNICO TECHNICAL MANUAL
Z14 MANUAL TÉCNICO TECHNICAL MANUAL Z14 TECHNICAL INSTRUCTIONS CONTENTS: 1.- Opening the machine 2.- Changing the bridge 3.- Checking if cleaning and greasing is needed 4.- Puller runner bolts 5.- Tray
More informationAgri-Fab OWNERS MANUAL. Model No WHEEL CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully
Agri-Fab OWNERS MANUAL Model No. 45-0270 4-WHEEL CART CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com
More informationEasyDigging.com HOSS Single Wheel Hoe or Parts List and Tool List
Parts List and Tool List Your package should contain the following components: 1 of Toolbar Assembly with 2 wheel arms 1 of Steel Wheel with bronze bushing installed 2 of Steel Dust Caps (For wheel assembly)
More informationSteel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
More informationFencing Options. Properly installed corner brace assemblies are the cornerstone of any fence. Fences with. A Horizontal brace (compression member)
Fencing Options 125 The goal of fencing is to facilitate the management of the livestock herd. The type and design of a fencing system will vary with the type of animal and the level of management. Boundary
More informationCold Saw Blade Basics
Cold Saw Blade Basics 01/2018 Scotchman Industries Inc. 180 US-14 Philip, SD 57567 USA Phone 800.843.8844 - Fax 800.843.2499 www.scotchman.com info@scotchman.com THE COLD SAW BLADE MATERIAL Most Cold Saw
More information2015 State Ag Mechanics Exam
Florida FFA Association ID: A 2015 State Ag Mechanics Exam Multiple Choice Identify the choice that best completes the statement or answers the question. Mark your answer choices on your answer form. 1
More informationChapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
More informationInstructions For Installing A Pig Fence
Instructions For Installing A Pig Fence A Multi-wire Fence on a Single Line of Posts Height: 18 Inches Polywire for seasonally removable fences Aluminum wire for permanent fences These pages provide the
More informationDIY CIDER PRESS. If you ever fancied making your own cider, now is your chance! To build a cider press you will need the following;
DIY CIDER PRESS If you ever fancied making your own cider, now is your chance! To build a cider press you will need the following; Plain timber (we used CLS Timber 40x90cm) Plywood (we used 18mm marine
More informationA Long-Term Survival Guide - How To Make Bamboo Joints:
A Long-Term Survival Guide - How To Make Bamboo Joints: Bamboo is one of the most useful plants that survivalists can grow, as it can be used to make shelters, traps, cages, tools, weapons, bridges, rafts,
More informationGardening. Sprayers/Rakes SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN RAKE - LAWN RUBBER SPRAY - PRESSURE 1.25 LITRE
SPRAY - TRIGGER 500ML & 1 LITRE RAKE - LAWN STEEL FAN Versatile pressure sprayer for home and garden Adjustable nozzle provides a choice of single jet through to fine mist Trigger action for easy onehand
More informationWESTERN PISTOL.22 CALIBER SINGLE SHOT. Entire pamphlet Copyrighted by JACO Designs 1972
WESTERN PISTOL.22 CALIBER SINGLE SHOT Entire pamphlet Copyrighted by JACO Designs 1972 This pamphlet contains the plans and instructions necessary to construct the Western pistol. This pistol breaks open
More informationModule 9 Lecture 35 to 40 DRILLED-SHAFT AND CAISSON FOUNDATIONS
Topics Module 9 Lecture 35 to 40 DRILLED-SHAFT AND CAISSON FOUNDATIONS 35.1 INTRODUCTION 35.2 DRILLED SHAFTS 35.3 TYPES OF DRILLED SHAFTS 35.4 CONSTRUCTION PROCEDURES Use of Casings and Drilling Mud Inspection
More informationOWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. -0301 CAUTION: Read Rules for Safe Operation and Instructions Carefully 17 LB. POLY PRO SPIKER/SPREADER Safety Assembly Operation Maintenance Parts PRINTED IN U.S.A. FORM NO. 78
More informationGREAT OUTDOORS A ACHIEVEMENT DAY REQUIREMENTS. Bird Feeder 40 Swallow or Bat Box 30 Special Project Marks EXHIBITION REQUIREMENT.
WELCOME Welcome to the 4-H Great Outdoors A Project! Please read through this guide carefully, as it contains information and suggestions that are important for your project. 4-H leaders can obtain a Leader
More informationResidential Fencing Picket. Installation Guide
Residential Fencing Picket. Installation Guide Jabiru Picket Fence White Contents Getting Started 4 Installation Tips 4 Shortening a Panel Tools Required 5 Instructions 6 3 Getting Started Congratulations
More informationDouble Bar Plate Dowels for Saw-Cut Contraction Joints
Double Bar Plate Dowels for Saw-Cut Contraction Joints Designed to Deliver More Serviceable Slabs Concrete slabs-on-ground must be able to withstand the repetitious, concentrated loads and abrasion of
More informationNautical Decor. Timeless Gifts 17
Nautical Decor Full Size Diving Bells The two diving bells illustrated on the left are a reproduction of the US navy divers Mark V version. Our reproductions are made of copper with brass attachments.
More informationMechanical Drawing. Fig 5-1
College of Engineering 1 Mechanical Drawing Mechanical Engineering Department Mechanical Drawing Lecture 5 Keys and keyways 5-1 Introduction A key, Fig. 5.1, is usually made from steel and is inserted
More informationAN IMPROVED VANDERWILT ROCK SAW G. D. Eurcn, Uniaersity of Arizona, Tucson, Arizona.
AN IMPROVED VANDERWILT ROCK SAW G. D. Eurcn, Uniaersity of Arizona, Tucson, Arizona. A simple and inexpensive device for sawing rock specimens up to 7 inches square in cross section was designed and described
More informationWorking with Wood and Wood Materials
Working with Wood and Wood Materials Excerpt from the Bosch Encyclopedia of Power Tools. Written & Published by ROBERT BOSCH GmbH and Robert Bosch Tool Corporation. The grain direction of the fibers determines
More informationFENCE INSTALLATION GUIDE 8 HIGH WALLS
FENCE INSTALLATION GUIDE 8 HIGH WALLS 1.866.648.9336 www.simtekfence.com INSTALLATION GUIDE These instructions are designed to assist both professional installers and do-it-yourselfers of SimTek decorative
More information2008 High School Math Contest Draft #3
2008 High School Math Contest Draft #3 Elon University April, 2008 Note : In general, figures are drawn not to scale! All decimal answers should be rounded to two decimal places. 1. On average, how often
More informationPRO Series Brakes Operating Instructions
PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,
More informationModel No.'s B
owners manual Model No.'s 45-01012 190-653B UTILITY CARTS (SEE SPECIFICATIONS ON PAGE 7) CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the
More informationINSTALLATION. Installation Guide. Installing Bamboo Flooring on Top of a Wood Subfloor
READ COMPLETELY BEFORE STARTING INSTALLATION. Congratulations on choosing Yanchi bamboo flooring. Please take time to read the following procedures before you begin installation. With the correct installation
More informationA Know Before You Go Guide to our Museum
A Know Before You Go Guide to our Museum There are a few rules I need to remember: I use my walking feet. I use my indoor voice. I share and wait patiently for my turn. I use picking up hands. And I have
More informationForce multipliers and speed multipliers Machines can make work easier by reducing the amount of force necessary to move an object or increasing the
MACHINES A machine is a device that makes work easier by transmitting or transforming energy. They have been used since ancient times to help people move heavy objects, bring substances like water from
More informationHow to Grow Wheat. Growing Wheat For Grain Make Your Own Flour! Different Types of Wheat
How to Grow Wheat ) 888 246 5233 Growing Wheat For Grain Make Your Own Flour! If you re deep into gardening and self-sufficiency, sooner or later you ll want to try growing wheat. Among other benefits,
More informationNOT ALLOW YOUNG CHILDREN TO PLAY WITH THIS TOY UNSUPERVISED.
SNAPPING ALLIGATOR This wooden toy is great for parents or grandparents to play with young children. Hold by the tail and move the alligator slowly along with the front wheel slightly off the ground and
More informationowners manual CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts
owners manual Model No. 45-0350 (ATV) 45-0351 (FARM) (45-0350 SHOWN) TANDEM AXLE CART CAUTION: Read Rules for Safe Operation and Instructions Carefully IMPORTANT! The wheel bearings are not pre lubricated.
More informationS10C. Instructions. Version S10C-V1c
S10C Instructions Version S10C-V1c To celebrate our fortieth anniversary, we have transformed the spinning wheel it all started with: the S10. The new S10 Concept spinning wheel makes it possible to customize
More informationUNPACK & ASSEMBLY. Done! CAUTION! THE MILL WILL BE VERY HEAVY - GET ASSISTANCE Pepe Tools.
PARTS DIAGRAM T Bar Height adjustment Wooden hand grip Height adjustment gears Frame Height adjustment screws Top roller End Gears cover Handle Brass Bushes (Each side) Bottom roller 4:1 Gearbox Mounting
More informationCONTINUOUS COUNTERPOISE ON POLES
Project Procedure CONTINUOUS COUNTERPOISE ON POLES 07/25/2011 PAGE 1 OF 5 1.0 PURPOSE The purpose of this procedure is to provide guidance and direction for the installation of continuous counterpoise
More informationInformation Booklet 1
NOTES:-. Information Booklet 1 Axe & Saws Compiled For Cambridgeshire Scouts August 2013 Parts of an Axe and SAFETY RULES An axe is a good servant but a bad master. No Scout plays or fools with an axe
More informationRosalina Accessories Tutorial Version March 2011 Martyn
Rosalina Accessories Tutorial Version 1.0 - March 2011 Martyn Star Brooch Feel free to experiment with these dimensions, you should make a template you are happy with, the method still works. 1) Creating
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationINSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: IMPORTANT INFORMATION
INSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: To achieve a safe and long lasting Ekodeck installation, it is important to read the following guide in full. Be used as a structural or load bearing
More informationUse of tools Summary: Billhook
No P1: Out of Classroom Page 1 of 10 APPENDIX 8: METHOD STATEMENTS Use of tools Summary: Billhook Check tang is secure in shaft. Check that blade is sharp If using as a swinging tool - ensure no-one is
More information