A H M 531 The Civil Engineering Center

Size: px
Start display at page:

Download "A H M 531 The Civil Engineering Center"

Transcription

1 Title Page Introduction 2 Objectives 2 Theory 2 Fitting 3 Turning 5 Shaping and Grinding 7 Milling 8 Conclusion 11 Reference 11 1

2 Introduction Machining Machining is a manufacturing process in which a cutting tool is used to remove excess material from a work part so that the remaining material is the desired part shape. And it is some times called Materials removal processes. Objectives To know about the machines used in this operation, its name parts and jobs. To distinguish when to use a machine and for what type of parts. Theory and background: Machining is the final operation of making the working piece, this operation contains cutting parts from the working piece to make soft surfaces. Cutting conditions: The cutting speed: It is expressed with unit of meter per minute. It is defined as the largest of the relative velocities between the cutting tool and the work piece. The depth of the cut: It is expressed in millimeter and is defined as the distance that the cutting tool project below the original surface of the work. The feed: It is expressed with the unit mm per revolution It is defined as the movement between the tool and the work piece during the operation. Note that is some operation the cutting speed depends on the diameter of the work piece such as in turning, in other operations the cutting speed depends on the diameter of the cutting tool. When I will talk about the machines it I will discuss it on three axes the name, Operation and parts. 2

3 Fitting: It is the operation a student or an engineer does to produce a working piece using manual tools. Three Apparatuses should be available for the fitting operation: 1. The working table. 2. The vice. 3. The files. And here I gave a brief of each one: 1. The work table: It must satisfy the following: It should be made from a heavy metal or wood, so that the movement and the vibrations won t affect on it during working and knocking on it. Natural or manufactured lighting should be available in the working place. The height of the working table should be 80 cm so it fits most of the worker length. Drawers and shelves should be available in the working table. 2. Vice It has the following parts: Moving jaw. Fixed jaw. Body. Sliding part. Handle. Chuck release, it is used to release the moving jaw in the vice so we can move it faster. Caring about the vice: 1. The vice is made of casting metal, which breaks easily when knocking it. 3

4 2. Oil the screws regularly. 3. Never fix on the vice a piece that is bigger than its size. 4. Clean the vice regularly. 5. Never hammer on the top of the sliding part. 6. When fixing apiece into the vice never push the handle using external forces. A problem with vices: On the jaws of the vice, a rough metal pieces to prevent the working pieces from slipping, however, when dealing with soft metal pieces the jaws might ruin the finished pieces. The solution: The invention of vice shoes from soft metals as well, solved this problem. So when I deal with a soft metal pieced all I have to do to prevent it form scratching or being ruined is to attach the vice shoes on the vice jaws. 3. Files: Files are made of a mixture of metals, so that it can be used with any type of working pieces. To specify a file the following information should be given: File length. The length of the file is directly proportional with the length of the working piece. File shape. It is also proportional with the shape of the working pieces. Grade of cut. There are three grades of cut: Roughing, Bastard, Smooth and dead file. Caring of files: 1. Clean the file using the wire purse. Unless that, chips of metal will be stuck on the file and so the finished piece will be dirty. 2. Never place the files on each other. 3. Use the file only for filling and never use it to knock on the working piece to edit its position. 4

5 Some notes on the filling operation: The file should be elevated for about 5 mm above the vice. Why? Because in that way the filling sound will be acceptable otherwise it will be annoying. The cutting edges of the files are always to the front direction. The cutting edges angle equals 45 degrees. As the finished piece is harder the angle of the cutting is smaller. The sawing Operation: The saw consists of tow parts: Handle and The Hack. When starting the sawing operation, we should start with more than one tooth. We noticed that the teeth have a set of sides, and that is to cause the blade to cut a slit wider than it self, and prevents the body of the blade from rubbing and jamming the saw cut. Blades might break for the following reasons: Rapid and erratic strokes. Too much pressure. Blade held to loosely in the frame. And that why blades are changeable. Turning: Turning is carried out on a machine tool called lathe. And is used to shape round pieces of metal. The jobs of the Lathe machine: To decrease the outside diameter. To increase the inside diameter. Making configuration turning. 5

6 Parts of the machine: They are summarized in table 1. Name Function Descriptions Head stock It contains the gearbox and the spindle. The spindle can be related with two types of chucks: The bed The Saddle Tail stock As a slide for the saddle and the tail stock. It consists of the following parts: Carriage: It moves the group forward and backward, to give parallel turning to the spindle. Cross slide: It moves the group left and right, It gives depth of cut in the long turning, And gives feed rate in cross turning. The compound slide: It 3 jaw chuck 4 jaws chuck It is hard. To link regular cylindrical shapes and triangular shapes. To link the irregular shapes. gives Precision A H in turning, M 531 Parallel turning, taper turning, and boring turning. Tool post: Carries the cutting tool which is made from high speed steel. To support the long work pieces. It gives drilling. Taper turning. The cutting tool cuts every thing which is less tough, But if the working piece was tougher we use diamond cutting tools. The correct rotation of the cutting tools is counter clock wise. It is placed at the end of the machine. Feed change gear box Base It controls the feed rate and the cutting speed automatically. Support the parts of the turning machine. Table 1 6

7 The procedures: We were doing the finishing of a circular metal piece we made by casting. And here I describe the procedures of turning to this piece. 1. Facing: Turning the circumference of the working piece then we place the measurements. 2. Straight turning: Here we reduced the diameter to 125mm. 3. Shoulder turning: We measure from the pieces surface to the inside of it and we reduce the front diameter to 115mm. 4. Finishing: To get rid of the riser. The remaining thickness should be 10mm. Shaping and grinding: Shaping: The machines name>> Shaping machine. The machines operation>> Production of soft surface. The machines specification>> 1- The machine gives linear motion on the Surface of the working piece. 2- The cutting tools is attached with the head. 3- The working piece is attached to the Vice. The machines disadvantage>> It is too slow. Note that we use shaping when the number of working pieces is small. The machine parts>> 1. Ramp 2. Head, it contains a micrometers the gives a precision of 0.1 mm. 3. Column that contains the gear box. Grinding: 7

8 The machines name>> Surface grinding machine. The machines operation>> Production of highly soft plains. The machines apparatus>> Are described in table 2 Name Operation Description Column It contains the gearbox It contains a micrometer that gives a precision of 0.01 mm. Grinding Wheel (Cutting tool) Cross slide Table Vice The cooling liquid Does the cutting operation. Carries the table. Carries the vice It is made of a mixture of sand and carbide materials. The cutting edges are infinity. Its speed is high and equal to 2860 rev/min Fixes the working A H M pieces 531 magnetically. The Civil Reduce Engineering friction Center Reduce resistance Reduce heat Remove the chips from the working piece surface. Protect the working piece from oxidizing. Table 2 It is made of seed oil and water. 8

9 Milling: Main operation of milling is the production of flat surfaces. It is more accurate and speeds than the shaping operation but is more expensive. There are two types of milling: 1. Horizontal milling. 2. Vertical milling. Table 3 compares between the two types. Compare Horizontal Milling Vertical Milling Spindle Horizontal Vertical Operation Peripheral milling Face milling Holding cutting tools Stud Arbor Cullet chuck Holding the working piece If the working piece was small we use the vice otherwise we use the working table, And for cylindrical pieces we use the V-Block Table 3 Note: One muse distinguish between the rotation direction and the direction of the spindle. Type of face milling: They differ in the diameter of the cutting tool. 1. Conventional milling 2. Partial milling 3. End milling 4. Profile milling 5. Pocket milling 6. Surface milling Note that for polygon pockets we use Pocket milling but for circular pockets we use drilling. 9

10 Types of Peripheral milling: They differ in the width of the cutting tool. 1. Slab milling 2. Slot milling 3. Sid milling 4. Straddle milling For more information about these types see figures Direction of rotation: 1. Up milling 2. Down milling But Up milling is better because there is no vibration results from it, opposite of the down milling. The Vertical milling machine parts: 1. Base 2. Column 3. Lead, change the spindle from horizontal to vertical and it carries the cullet chuck. 4. knee, movement in the Z axis. 5. Saddle, movement in the Y axis. 6. Work table, Movement in the X axis. 7. Vice. The parts of the Horizontal milling machine are the same except that there is Over Arm head to fix the holding arbor. 10

11 Conclusion: After 4 weeks of working on this report, I concluded the each of the machines we have studied have a specific operations that we should distinguish, for example, If the working piece has around shape then I will do the cutting using the turning machine, The cube and polygon shapes are cut using the milling or the shaping machine and that depends on the cost of the piece and the quantity, If I want to make holes in pieces then I will use the drill. And I also concluded the main differences between Shaping, Grinding, Turning and Milling and summarized that in table 4. Compare Shaping Grinding Turning Milling Cutting tool One Infinity One Multi edges edges Rotation No Rotation The cutting Working Cutting tool The Civil Engineering tool rotates Piece Center rotates rotates. References: Instructors Notes. Workshop Manual. 11

Materials Removal Processes (Machining)

Materials Removal Processes (Machining) Chapter Six Materials Removal Processes (Machining) 6.1 Theory of Material Removal Processes 6.1.1 Machining Definition Machining is a manufacturing process in which a cutting tool is used to remove excess

More information

Typical Parts Made with These Processes

Typical Parts Made with These Processes Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts

More information

Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering

Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st

More information

Chapter 24 Machining Processes Used to Produce Various Shapes.

Chapter 24 Machining Processes Used to Produce Various Shapes. Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts

More information

Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)

Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise) Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach

More information

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining

More information

Flat file. Round file. Hand file. Half -round. Mill file. Square file

Flat file. Round file. Hand file. Half -round. Mill file. Square file Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing

More information

Lathes. CADD SPHERE Place for innovation Introduction

Lathes. CADD SPHERE Place for innovation  Introduction Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to

More information

Summer Junior Fellowship Experience at LUMS. Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship

Summer Junior Fellowship Experience at LUMS. Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship Summer Junior Fellowship Experience at LUMS Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship Internship Schedule June 13-17: 2D and 3D drawings in AutoCAD June 20-24: 2D and 3D drawings in AutoCAD

More information

Lathe. A Lathe. Photo by Curt Newton

Lathe. A Lathe. Photo by Curt Newton Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring

More information

ROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department

ROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department Notes: Lathe (Turning) Basic Mechanical Engineering (Part B) 1 Introduction: In previous Lecture 2, we have seen that with the help of forging and casting processes, we can manufacture machine parts of

More information

DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is

More information

MACHINE TOOL ALIGNMENT TESTS

MACHINE TOOL ALIGNMENT TESTS MACHINE TOOL ALIGNMENT TESTS 39 MACHINE TOOL TESTING INTRODUCTION: The surface components produced by machining processes are mostly by generation. As a result, the quality of surface produced depends

More information

CNC Cooltool - Milling Machine

CNC Cooltool - Milling Machine CNC Cooltool - Milling Machine Module 1: Introduction to CNC Machining 1 Prepared By: Tareq Al Sawafta Module Objectives: 1. Define machining. 2. Know the milling machine parts 3. Understand safety rules

More information

Question 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46

Question 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46 Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for

More information

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip

More information

ROOP LAL Unit-6 (Milling) Mechanical Engineering Department

ROOP LAL Unit-6 (Milling) Mechanical Engineering Department Notes: Milling Basic Mechanical Engineering (Part B, Unit - I) 1 Introduction: Milling is a machining process which is performed with a rotary cutter with several cutting edges arranged on the periphery

More information

Turning and Lathe Basics

Turning and Lathe Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques

More information

Turning and Related Operations

Turning and Related Operations Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.

More information

Machining. Module 6: Lathe Setup and Operations. (Part 2) Curriculum Development Unit PREPARED BY. August 2013

Machining. Module 6: Lathe Setup and Operations. (Part 2) Curriculum Development Unit PREPARED BY. August 2013 Machining Module 6: Lathe Setup and Operations (Part 2) PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 Module 6: Lathe Setup and Operations (Part 2) Module Objectives

More information

Introduction to Machining: Lathe Operation

Introduction to Machining: Lathe Operation Introduction to Machining: Lathe Operation Lathe Operation Lathe The purpose of a lathe is to rotate a part against a tool whose position it controls. It is useful for fabricating parts and/or features

More information

TURNING BORING TURNING:

TURNING BORING TURNING: TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single

More information

Machining Processes Turning

Machining Processes Turning Machining Review Questions - Page 2 Machining Processes Turning 1. Identify the cutting parameters (speed, feed and depth of cut) for the turning process. 2. Identify the basic parts of the lathe machine

More information

Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2

Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Published by SOLAS 2014 Unit 1 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...

More information

Milling operations TA 102 Workshop Practice. By Prof.A.chANDRASHEKHAR

Milling operations TA 102 Workshop Practice. By Prof.A.chANDRASHEKHAR Milling operations TA 102 Workshop Practice By Prof.A.chANDRASHEKHAR Introduction Milling machines are used to produce parts having flat as well as curved shapes. Milling machines are capable of performing

More information

COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004

COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the

More information

MANUFACTURING PROCESSES

MANUFACTURING PROCESSES 1 MANUFACTURING PROCESSES - AMEM 201 Lecture 5: Milling Processes DR. SOTIRIS L. OMIROU Milling Machining - Definition Milling machining is one of the very common manufacturing processes used in machinery

More information

Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions

Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization

More information

Metal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.

Metal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7. Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal

More information

MACHINE TOOLS LAB LABORATORY MANUAL

MACHINE TOOLS LAB LABORATORY MANUAL Vanjari Seethaiah Memorial Engineering College Patancheru, Medak MACHINE TOOLS LAB LABORATORY MANUAL Department of Mechanical Engineering PREFACE Industrial Revolution has given man a lot many luxuries,

More information

Milling. Chapter 24. Veljko Samardzic. ME-215 Engineering Materials and Processes

Milling. Chapter 24. Veljko Samardzic. ME-215 Engineering Materials and Processes Milling Chapter 24 24.1 Introduction Milling is the basic process of progressive chip removal to produce a surface. Mill cutters have single or multiple teeth that rotate about an axis, removing material.

More information

STEEL RULE. Stock TRY SQUARE

STEEL RULE. Stock TRY SQUARE FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation

More information

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling Chapter 24 Machining Processes Used to Produce Various Shapes: Milling Parts Made with Machining Processes of Chapter 24 Figure 24.1 Typical parts and shapes that can be produced with the machining processes

More information

Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing

Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping

More information

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling operation

More information

Review of Various Machining Processes

Review of Various Machining Processes Review of Various Machining Processes Digambar O. Jumale 1, Akshay V kharat 2, Akash Tekale 3, Yogesh Sapkal 4,Vinay K. Ghusalkar 5 Department of mechanical engg. 1, 2, 3, 4,5 1, 2, 3, 4,5, PLITMS Buldana

More information

Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing

Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool

More information

ME MANUFACTURING TECHNOLOGY LABORATORY-I VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI LAB MANUAL

ME MANUFACTURING TECHNOLOGY LABORATORY-I VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI LAB MANUAL VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI 636 703 ME 6311 - MANUFACTURING TECHNOLOGY LABORATORY-I REGULATION 2013 LAB MANUAL BRANCH YEAR / SEM MECHANICAL ENGINEERING II YEAR & III SEMESTER D

More information

Lathe Accessories. Work-holding, -supporting, and driving devices

Lathe Accessories. Work-holding, -supporting, and driving devices 46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding

More information

Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY

Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form

More information

Agricultural Mechanics and Technology Power Tool Safety Rules

Agricultural Mechanics and Technology Power Tool Safety Rules Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust

More information

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh Basic Workshop 1 أت ارش Machining Process Machining is a term used to describe a variety of material removal processes in which a cutting tool removes unwanted material from a workpiece to produce the

More information

CHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1

CHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter

More information

INDEX. S.No. Name of the Experiment Page No.

INDEX. S.No. Name of the Experiment Page No. MACHINE TOOLS LAB INDEX S.No. Name of the Experiment Page No. 1 Step Turning and Taper Turning on Lathe 2 Thread Cutting and Knurling on Lathe 3 Machining Flat Surface using Shaper Machine 4 Manufacturing

More information

LANDMARK UNIVERSITY, OMU-ARAN

LANDMARK UNIVERSITY, OMU-ARAN LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: DRILLING. COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MECHANICAL ENGINEERING ENGR. ALIYU, S.J Course code: MCE

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe

1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe 1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe

More information

Module 1. Classification of Metal Removal Processes and Machine tools. Version 2 ME IIT, Kharagpur

Module 1. Classification of Metal Removal Processes and Machine tools. Version 2 ME IIT, Kharagpur Module 1 Classification of Metal Removal Processes and Machine tools Lesson 2 Basic working principle, configuration, specification and classification of machine tools Instructional Objectives At the end

More information

PREVIEW COPY. Table of Contents. Using the Horizontal Milling Machine...3. Lesson Two Slab Milling Procedures...19

PREVIEW COPY. Table of Contents. Using the Horizontal Milling Machine...3. Lesson Two Slab Milling Procedures...19 Table of Contents Lesson One Using the Horizontal Milling Machine...3 Lesson Two Slab Milling Procedures...19 Lesson Three Milling Slots and Angles...35 Lesson Four Straddle, Side, and Face Milling...51

More information

PLANING MACHINE. Crossrail. Tool head. Table. Table. reciprocating movement Roller. Bed. Open Side Planer Sketch S-8.1-A. Feed screws.

PLANING MACHINE. Crossrail. Tool head. Table. Table. reciprocating movement Roller. Bed. Open Side Planer Sketch S-8.1-A. Feed screws. 8 PLANING MACHINE A8.1 : Planing Machine Tool head Table reciprocating movement Roller Table Cross-rail Bed Column Open Side Planer Sketch S-8.1-A Introduction This is also a reciprocating type of machine

More information

Trade of Toolmaking. Module 2: Turning Unit 8: Concentric Turning (4-jaw) Phase 2. Published by. Trade of Toolmaking Phase 2 Module 2 Unit 8

Trade of Toolmaking. Module 2: Turning Unit 8: Concentric Turning (4-jaw) Phase 2. Published by. Trade of Toolmaking Phase 2 Module 2 Unit 8 Trade of Toolmaking Module 2: Turning Unit 8: Concentric Turning (4-jaw) Phase 2 Published by SOLAS 2014 Unit 8 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4 1.0

More information

Other Lathe Operations

Other Lathe Operations Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady

More information

A H M 531 The Civil Engineering Center

A H M 531 The Civil Engineering Center Table of Contents contents Page Introduction 1 Objectives 2 Background 2 Apparatus and tools 3 Requirements 5 Procedures 6 Conclusion 10 References 10 1 Introduction Carpentry work is one of the most important

More information

INTRODUCTION TO GRINDING PROCESS

INTRODUCTION TO GRINDING PROCESS GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding

More information

MILLING and GRINDING MACHINES Machine Tools

MILLING and GRINDING MACHINES Machine Tools ELEMENTS OF MECHANICAL ENGINEERING PART B UNIT VI MILLING and GRINDING MACHINES Machine Tools 1 Objectives: 1.1 To understand the Principle of working of Milling, Horizontal & Vertical Milling. 1.2 Classification/Types

More information

Instruction Sheet MCHE 365 & I-Tech 344 Lathe & Mill Machining Operations Pencil Organizer Project, FALL 2015

Instruction Sheet MCHE 365 & I-Tech 344 Lathe & Mill Machining Operations Pencil Organizer Project, FALL 2015 Instruction Sheet MCHE 365 & I-Tech 344 Lathe & Mill Machining Operations Pencil Organizer Project, FALL 2015 1 Always flip to 1 st page & leave your drawings & instructions on your Machine at end of class.

More information

STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK

STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF

More information

MACHINE TOOLS LAB MANUAL. B. Tech III Year - I Semester DEPARTMENT OF MECHANICAL ENGINEERING. Aurora s Technological And Research Institute

MACHINE TOOLS LAB MANUAL. B. Tech III Year - I Semester DEPARTMENT OF MECHANICAL ENGINEERING. Aurora s Technological And Research Institute MACHINE TOOLS LAB MANUAL B. Tech III Year - I Semester NAME : ROLL NO : BRANCH : DEPARTMENT OF MECHANICAL ENGINEERING Aurora s Technological And Research Institute Parvathapur, Uppal, Hyderabad-98. 1 MACHINE

More information

SHAPER, MILLING AND GEAR CUTTING MACHINES

SHAPER, MILLING AND GEAR CUTTING MACHINES UNIT 3 SHAPER, MILLING AND GEAR CUTTING MACHINES 1. Compare hydraulic shaper with mechanical shaper? SL.NO Hydrulic shaper Mechanical shaper 1. smooth cutting operation Rough and noisy cutting operation

More information

11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate

11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular

More information

Precision made in Germany. As per DIN The heart of a system, versatile and expandable.

Precision made in Germany. As per DIN The heart of a system, versatile and expandable. 1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Get to know drilling. Module 6

Get to know drilling. Module 6 Get to know drilling Module 6 Warm Up Activity on Module 5 Team A vs. Team B Lets play Jeopardy!! Objectives 1. Describe the operation of a drill press. 2. Identify the drill press parts. 3. Identify the

More information

Knee Mill. 1. Two Axis kits measure the table movement where left to right is considered the X-Axis and front to back is considered the Y-Axis.

Knee Mill. 1. Two Axis kits measure the table movement where left to right is considered the X-Axis and front to back is considered the Y-Axis. Knee Mill Many knee mill manufacturers publish their machine travels in their literature and on their web sites. For new machines, this information is useful to determine the proper length Acu-Rite precision

More information

C O M P E T E N C Y A L I G N M E N T

C O M P E T E N C Y A L I G N M E N T S C A N S C O M P E T E N C Y A L I G N M E N T -ROP COURSE: MACHINIST/PRE-EMPLOYMENT ROP NO. 29-40-89 SCANS COMPETENCIES BASIC SKILLS READING, WRITING, ARITHMETIC, MATHEMATICS, LISTING, AND SPEAKING.

More information

Workshop Practice (ME192)

Workshop Practice (ME192) Workshop Practice (ME192) Credits: 3 Contacts: Mail: poddar05@gmail.com Web: http://www.ajourneywithtime.weebly.com Exp 03: To make a pin as given profile from a φ20 mm mild steel rod in a lathe. Material

More information

CHAPTER 1- INTRODUCTION TO MACHINING

CHAPTER 1- INTRODUCTION TO MACHINING CHAPTER 1- INTRODUCTION TO MACHINING LEARNING OBJECTIVES Introduction to Manufacturing, Manufacturing processes Broad classification of Manufacturing processes Kinematics elements involved in metal cutting

More information

061 MECHANICAL ENGINEERING CRAFT PRACTICE

061 MECHANICAL ENGINEERING CRAFT PRACTICE 061 MECHANICAL ENGINEERING CRAFT PRACTICE EXAMINATION STRUCTURE The examination for this syllabus wills cover the underlisted two major areas of groupings and 193 Building/Engineering Drawing as the related

More information

Manufacturing Science-II (EME-503)

Manufacturing Science-II (EME-503) Time: 1 Hour B.Tech. [SEM V (ME-5 All Groups)] QUIZ TEST-1 Manufacturing Science-II ` Max. Marks: 30 Note: Attempt all the questions Q1) How metal is removed in metal cutting? Explain by giving any simple

More information

TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES

TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000

More information

TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head

TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691

More information

Machining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba

Machining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba Machining Processes Used to Produce Various Shapes 1 Homework Assignment Due Wensday 28/4/2010 1. Show that the distance lc in slab milling is approximately equal to for situations where D>>d. (see Figure

More information

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated

More information

Turning Operations. L a t h e

Turning Operations. L a t h e Turning Operations L a t h e Turning Operations Machine Tool LATHE Job (workpiece) rotary motion Tool linear motions Mother of Machine Tools Cylindrical and flat surfaces Some Typical Lathe Jobs Turning/Drilling/Grooving/

More information

UNIT 5: Indexing: Simple, compound, differential and angular indexing calculations. Simple problems on simple and compound indexing.

UNIT 5: Indexing: Simple, compound, differential and angular indexing calculations. Simple problems on simple and compound indexing. UNIT 5: Milling machines: Classification, constructional features, milling cutters nomenclature, milling operations, up milling and down milling concepts. Indexing: Simple, compound, differential and angular

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing

More information

Screws. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:

Screws. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes: Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for

More information

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The

More information

UNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle

UNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this

More information

Credit Value 7 QCF Level 2 GLH 50. Learner pack

Credit Value 7 QCF Level 2 GLH 50. Learner pack QETI/018 Turning and milling machining techniques and technology Credit Value 7 QCF Level 2 GLH 50 Unit purpose/aims Learner pack This unit enables you to acquire the essential knowledge and practice to

More information

C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. TURNING PRODUCT CATALOG

C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. TURNING PRODUCT CATALOG TURNING PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. HIGH SPEED

More information

The new generation with system accessories. Made in Europe!

The new generation with system accessories. Made in Europe! 1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.

More information

Chapter 22: Turning and Boring Processes. DeGarmo s Materials and Processes in Manufacturing

Chapter 22: Turning and Boring Processes. DeGarmo s Materials and Processes in Manufacturing Chapter 22: Turning and Boring Processes DeGarmo s Materials and Processes in Manufacturing 22.1 Introduction Turning is the process of machining external cylindrical and conical surfaces. Boring is a

More information

TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head

TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691

More information

HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG

HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG 6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,

More information

TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox

TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox Ex GST Inc GST $3,460.00 $3,979.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm):

More information

By C.W. Woodson From the pages of Model Craftsman magazine June, 1937

By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling, Broaching, Sawing, and Filing; Gear Manufacturing

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling, Broaching, Sawing, and Filing; Gear Manufacturing Chapter 24 Machining Processes Used to Produce Various Shapes: Milling, Broaching, Sawing, and Filing; Gear Manufacturing Parts Made with Machining Processes of Chapter 24 Figure 24.1 Typical parts and

More information

SHERLINE Drill Chucks

SHERLINE Drill Chucks SHERLINE Drill Chucks P/N 1010/1015 (5/32"), P/N 1072 (1/4") and P/N 1069 (3/8") Chuck and Drill Sizes The size of the chuck indicates the largest size drill shank it will hold. Larger chucks will hold

More information

Milling Machine Operations

Milling Machine Operations 03/05/2004 TABLE OF CONTENTS Lesson 1 Objectives......3 Vertical Mill 4 Milling Machine Accessories......23 Common Milling Cutters......24 Metal Saws 24 End Mills 25 T-Slot Cutter 25 Dovetail Cutter......25

More information

Module 4 General Purpose Machine Tools. Version 2 ME, IIT Kharagpur

Module 4 General Purpose Machine Tools. Version 2 ME, IIT Kharagpur Module 4 General urpose Machine Tools Lesson 24 Forces developing and acting in machine tools Instructional objectives At the end of this lesson, the students will be able to; (i) Identify the sources

More information

Metals can be bought from suppliers in standardized forms and sizes, such as round,

Metals can be bought from suppliers in standardized forms and sizes, such as round, 1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally

More information

Trade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9

Trade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9 Trade of Toolmaking Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2 Published by SOLAS 2014 Unit 9 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4

More information

Machining. Module 5: Lathe Setup and Operations. (Part 1) Curriculum Development Unit PREPARED BY. August 2013

Machining. Module 5: Lathe Setup and Operations. (Part 1) Curriculum Development Unit PREPARED BY. August 2013 Machining Module 5: Lathe Setup and Operations (Part 1) PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 Module 5: Lathe Setup and Operations (Part 1) Module Objectives

More information

TIMTOS 2017 EXHIBITS PROFILE

TIMTOS 2017 EXHIBITS PROFILE TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes

More information

BHARATHIDASAN ENGINEERING COLLEGE NATTRAMPALLI DEPARTMENT OF MECHANICAL ENGINEERING LABORATORY MANUAL ME6411-MANUFACTURING TECHNOLOGY LAB- II

BHARATHIDASAN ENGINEERING COLLEGE NATTRAMPALLI DEPARTMENT OF MECHANICAL ENGINEERING LABORATORY MANUAL ME6411-MANUFACTURING TECHNOLOGY LAB- II BHARATHIDASAN ENGINEERING COLLEGE NATTRAMPALLI 635 854 DEPARTMENT OF MECHANICAL ENGINEERING LABORATORY MANUAL ME6411-MANUFACTURING TECHNOLOGY LAB- II YEAR / SEMESTER : II / IV DEPARTMENT : Mechanical REGULATION

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT IV SURFACE FINISHING PROCESS Grinding Grinding is the most common form of abrasive machining. It is a material cutting process which engages an abrasive tool whose cutting

More information

A Quick-Change Gearbox For The 7x Minilathe

A Quick-Change Gearbox For The 7x Minilathe A Quick-Change Gearbox For The 7x Minilathe Richard Hagenbuch 10 August 2002 This article describes how to a build a quick-change gearbox for your 7X minilathe. I'll describe one that I built as a prototype

More information