Round grinding machines
|
|
- Sheila McDowell
- 5 years ago
- Views:
Transcription
1 Round grinding machines
2 Round Grinding Machine 72/ /210 Item number: VT workpieces in the format of 156 x 156 mm² and 210 x 210 mm², with three grinding aggregates (2 x pre-, 1 x fine grinding) and one additional grinding aggregate for OD grinding.s of 180 up to 600 mm can be processed.the fully automatic grinding machine excels by the following advantages: grinding of flat (45 ) and round chamfers unique, pneumatic clamping and centring of the workpieces, even in the case of a rectangular brick shape the squared ingots can be processed without preparation (for instance gluing of centring- or clamping-pieces) automatic edge detection and adjustment of grinding tools with ingot length detection, for an optimized cycle time, by using high-resolution measurement systems detection and evaluation of the work piece specific quality data after grinding, for instance chamfer size, chipping and un-grinded chamfer-area based on ingot defects incl. an evaluation of useable ingot lengths automatic wheel wear compensation equipped with two loading areas for manual and fully automatic loading, for instance with the help of an industrial robot high throughput, even when a high removal of silicon is achieved by using 4 grinding wheels with a separate pre- and fine grinding process, for instance:ingot diameter as grown: ø 203 mmfinal ingot diameter: ø 195 mmingot ; 500 mmcycle p; < 30 Min.Machine sp; approx bricks/year (based 24/7-production)Quality data of workpiece: DIN EN ISO 1101 evenness +/- 0,1 mm DIN EN ISO 1101 roundness < 0,1 mm up 200 mm DIN EN ISO 1101 concentricity 0,2 mm surface roughness Ra 0,15 µm - grinding spindles (4 pieces) with air protected spindle bearings - 15 tough panel with HMI, visualisation based on WinCC flexible - Option: ARPAT Arnold Remote Production Analysis Tool machine internal MES mm 156 x 156 mm², 210 x 210 mm²
3 Weight Machine measurements (LxWxH) approx kg approx x 2290 x 2035 mm Round Grinding Machine 72/ /156 Item number: VT workpieces in the format of 125 x 125 mm² and 156 x 156 mm², with three grinding aggregates (2 x pre-, 1 x fine grinding) and one additional grinding aggregate for OD grinding. s of 450 up to 1000 mm can be processed. The fully automatic grinding machine excels by the following advantages: grinding of flat (45 ) and round chamfers unique, pneumatic clamping and centring of the workpieces, even in the case of a rectangular brick shape the squared ingots can be processed without preparation (for instance gluing of centring- or clamping-pieces) automatic edge detection and adjustment of grinding tools with ingot length detection, for an optimized cycle time, by using high-resolution measurement systems detection and evaluation of the work piece specific quality data after grinding, for instance chamfer size, chipping and ungrounded chamfer-area based on ingot defects incl. an evaluation of useable ingot lengths automatic wheel wear compensation equipped with two loading areas for manual and fully automatic loading, for instance with the help of an industrial robot high throughput, even when a high removal of silicon is achieved by using 4 grinding wheels with a separate pre- and fine grinding process, for instance:ingot diameter as grown: ø 204 mmfinal ingot diameter: p; ø 200 mmingot ; p; 1000 mmcycle p; < 48 Min.Machine sp; approx bricks/year (based 24/7- production)quality data of workpiece: DIN EN ISO 1101 evenness +/- 0,1 mm DIN EN ISO 1101 roundness < 0,1 mm up 200 mm DIN EN ISO 1101 concentricity 0,2 mm Average value Ra 0,15 µm - grinding spindles (4 pieces) with air protected spindle bearings
4 - 15 tough panel with HMI, visualisation based on WinCC flexible - Option: ARPAT Arnold Remote Production Analysis Tool machine internal MES (option) Weight Machine measurements (LxWxH) mm 125 x 125 mm²; 156 x 156 mm² approx, 8200 kg approx x 2290 x 2035 mm Round Grinding Machine 72/ /210 Item number: VT workpieces in the format of 156 x 156 mm² and 210 x 210 mm², with three grinding aggregates (2 x pre-, 1 x fine grinding) and one additional grinding aggregate for OD grinding.s of 450 up to 1000 mm can be processed.the fully automatic grinding machine excels by the following advantages: grinding of flat (45 ) and round chamfers unique, pneumatic clamping and centring of the workpieces, even in the case of a rectangular brick shape the squared ingots can processed without preparation (for instance gluing of centring- or clamping-pieces) automatic edge detection and adjustment of grinding tools with ingot length detection, for an optimized cycle time, by using high-resolution measurement systems detection and evaluation of the work piece specific quality data after grinding, for instance chamfer size, chipping and un-grinded chamfer-area based on ingot defects incl. an evaluation of useable workpiece lengths automatic wheel wear compensation equipped with two loading areas for manual and fully automatic loading, for instance with the help of an industrial robot high throughput, even when a high removal of silicon is achieved by using 4 grinding wheels with a separate pre- and fine grinding process, for instance:ingot diameter as grown: ø 204 mmfinal ingot diameter: ø 200 mmingot ; 1000 mmcycle p; < 48 Min.Machine sp; approx bricks/year (based 24/7-production)Quality data of workpiece: DIN EN ISO 1101 evenness +/- 0,1 mm DIN EN ISO 1101 roundness < 0,1 mm up 200 mm DIN EN ISO 1101 concentricity 0,2 mm Average value Ra 0,15 µm
5 - grinding spindles (4 pieces) with air protected spindle bearings - 15 tough panel with HMI, visualisation based on WinCC flexible - Optionen: ARPAT Arnold Remote Production Analysis Tool machine internal MES mm 156x156 mm²; 210x210 mm² Machine measurements without switch cabinet (LxWxH)approx x 2290 x 2035 mm Machine weight approx kg Round Grinding Machine 72/ /156 Item number: VT workpieces in the format of 125 x 125 mm² and 156 x 156 mm², with three grinding aggregates (2 x pre-, 1 x fine grinding) and one additional laterally working round grinding aggregate for OD grinding process.s of 180 up to 600 mm can be processed.the fully automatic grinding machine excels by the following advantages: grinding of flat (45 ) and round chamfers unique, pneumatic clamping and centring of the workpieces, even in the case of a rectangular brick shape the squared ingots can be processed without preparation (for instance gluing of centring- or clamping-pieces) automatic edge detection and adjustment of grinding tools with ingot length detection, for an optimized cycle time, by using high-resolution measurement systems detection and evaluation of the work piece specific quality data after grinding, for instance chamfer size, chipping and ungrounded chamfer-area based on ingot defects incl. an evaluation of useable ingot lengths automatic wheel wear compensation equipped with two loading areas for manual and fully automatic loading, for instance with the help of an industrial robot high throughput, even when a high removal of silicon is achieved by using 4 grinding wheels with a separate pre- and fine grinding process, for instance:ingot diameter as grown: ø 203 mmfinal ingot diameter: ø 195 mmingot ; 500 mmcycle < 30 Min.Machine
6 sp; approx bricks/year (based 24/7-production)Quality data of workpiece: DIN EN ISO 1101 evenness +/- 0,1 mm DIN EN ISO 1101 roundness < 0,1 mm up 200 mm DIN EN ISO 1101 concentricity 0,2 mm Surface roughness Ra 0,15 µm - grinding spindles (4 pieces) with air protected spindle bearings - 15 tough panel with HMI, visualisation based on WinCC flexible - Option: ARPAT Arnold Remote Production Analysis Tool machine internal MES Machine (LxWxH) Weight approx x 2290 x 2035 mm approx kg 125 x 125 mm²; 156 x 156 mm² mm
SEMICONDUCTORS MATERIALS AND CERAMICS
TPP CONDUCTORS MATERIALS AND CERAMICS MPS R700 S MPS 2 R300 S MPS 2 R300 DCS MPS R400 DS MPS R400 DS Twin MPS R400 GGP MPS 3HS MPS 3-134 Twin Solar block Grinder MPS T 500 NANOGRINDER/3 NANOGRINDER 941-3/300
More informationULTRA PRECISION HARD TURNING MACHINES
ULTRA PRECISION HARD TURNING MACHINES Hembrug Machine Tools, with more than 50 years experience in the design, manufacturing and marketing of ultra precision, fully hydrostatic turning machines, Hembrug
More informationDISKUS Double-Face-Grinding-Machines. Series: DDS 457 XR DDS 600 XR DDS 750 XR
DISKUS Double-Face-Grinding-Machines Series: DDS 457 XR DDS 600 XR DDS 750 XR DDS 457 600 750 XR Three grinding methods meeting different production problems: 1. Through-feed grinding For large mass-production
More informationAUTOMATION ACCESSORIES
RG SERIES AUTOMATION ACCESSORIES The Vision System Faster than contact probes, the ultra-highspeed vision system gives integrated, closed loop control of the machine using the image from the camera. The
More informationSTREAM FINISHING MACHINES
Structure and function 2 (SF) Technique Workpieces are fixed in a holder and immersed in a rotating process container filled with grinding or polishing granulate. Grinding effect due to the grinding and
More informationMachine weight kg 11000
Grinding range Grinding workpiece length Center height Workpiece weight Grinding wheel S1 and S2 Diameter, maximum Width, maximum Grinding wheel S3 Diameter, maximum Width, maximum Set-up area required
More informationDiamond Dressing System
Diamond Dressing System for CNCcontrolled dressing of vitrified bonded diamond grinding wheels (V+) and other types 1 Examples of Profiles With this new dressing system you can create a broad range of
More information[ means: One-stop shop. EMCOMAT FB-450 L / FB-600 L. Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle
[ E[M]CONOMY] means: One-stop shop. EMCOMAT FB-450 L / FB-600 L Universal milling machines with Heidenhain TNC 320 or EMCO Easy Cycle EMCOMAT FB-450 L / FB-600 L Whether single or small series production,
More informationTurmatic L 2530 Laser Cutter YCM 106 CNC CNC Machine HB 16 Balancing Machine A75 Tube Bender QC12Y-8*3200 Shear WC67Y-100/3200 Press Brake
Turmatic L 2530 Laser Cutter YCM 106 CNC CNC Machine HB 16 Balancing Machine A75 Tube Bender QC12Y-8*3200 Shear WC67Y-100/3200 Press Brake Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page:2 Total
More informationVertical and horizontal Turning/Grinding Centers
Vertical and horizontal Turning/Grinding Centers INDEX Turning/Grinding Centers Turning and grinding of course with INDEX The INDEX Turning/Grinding Centers combine the advantages of turning and grinding
More informationWHERE WE LIVE, QUALITY HAS A LONG TRADITION STREAM FINISHING UNITS SF SERIES. Precision finish demands. Precision finish demands. CF Series.
Precision finish demands Precision finish demands WHERE WE LIVE, QUALITY HAS A LONG TRADITION Founded in 1996, OTEC has quickly established itself as the market s technology leader by developing new machine
More informationXL Manufacturing Systems. Highly productive machining solutions for complex metal cutting tasks. Individual Systems
XL Manufacturing Systems Highly productive machining solutions for complex metal cutting tasks Individual Systems XL MANUFACTURING SYSTEMS ELHA-MASCHINENBAU The company ELHA-MASCHINENBAU Liemke KG is a
More informationMulti-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
More informationKey parameters. WALTER INFO 4/2018 PRECISION CLAMPING EQUIPMENT µgrind. for HELITRONIC tool grinding machines and HELICHECK measuring machines
Creating Tool Performance A member of the UNITED GRINDING Group WALTER INFO 4/2018 PRECISION CLAMPING EQUIPMENT µgrind for HELITRONIC tool grinding machines and HELICHECK measuring machines The new dimension
More informationINDUSTRY SOLUTIONS GEARS. Clamping solutions»gearing up for Precision«
INDUSTRY SOLUTIONS GEARS Clamping solutions»gearing up for Precision«www.hainbuch.com POWER YOU TRUST RELIABILITY YOU NEED The gear industry s go-to source for gear workholding The grinding and gear cutting
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationSuperfinish for the antifriction bearing industry
Superfinish for the antifriction bearing industry Modular solutions Linear oscillator Rotary oscillator Cup wheel spindle Tape unit Workpiece drive Motor spindle Friction Support rollers Modular solutions
More informationMax. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers:
CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles
More informationPF 61 Universal Cylindrical Grinding Machine PF 61 Universal Cylindrical Grinding for Flexible Production Thanks to its modular design, the PF 61 universal cylindrical grinding machine is your ideal choice
More informationCentre Grinding Machines
Centre Grinding Machines 1 Type ZS 102-151 - 201 2 Technical Data of Henninger Centre Grinding Machines Machine Type ZS 102 ZS 151 ZS 201 Centre hole grinding range Ø 1-58 mm Ø 2-90 mm Grinding wheel spindle
More informationGRINDSMART 830XW SMART MACHINE SMART GRINDING
SMART MACHINE SMART GRINDING EN Effective innovations in grinding solutions The new GrindSmart, a combination of technology and innovation, is the result of intensive research work combined with our engineers
More informationStainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM. Catalogue RE 4905
Stainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM Catalogue RE 4905 Rotary Indexing Tables and A-Axes by HIRSCHMANN Pin point accuracy Controlled dynamic power Consistent performance.
More informationReproducibility of surface roughness in reaming
Reproducibility of surface roughness in reaming P. Müller, L. De Chiffre Technical University of Denmark, Department of Mechanical Engineering, Kgs. Lyngby, Denmark pavm@mek.dtu.dk ABSTRACT An investigation
More informationDesign to Cost. EMCOTURN E25. CNC turning center for bar stock work up to Ø 25 mm (1 ) and also chucking work. TURNiNG
Design to Cost. EMCOTURN E CNC turning center for bar stock work up to Ø mm ( ) and also chucking work TURNiNG EMCO-WORLD.COM EMCOTURN E Uncompromising quality right down to the last detail at a very reasonable
More informationINTRODUCTION TO GRINDING PROCESS
GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding
More informationromi G 550 romi G 550M TUrNiNG CeNTerS Romi G SerieS
ROMI G 550 ROMI G 550M TURNING CENTERS Romi G Series ROMI Industrial Site view, in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY ROMI: Since 1930 producing high technology. Since its foundation,
More informationAir precision chucks APC
Air precision chucks APC MicroCentric GmbH Berblingerstr. 16 71254 Ditzingen / Germany Tel.: +49 (0)7156 17819-0 Fax: +49 (0)7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this
More informationMaier ML20D - Technical Details. for illustration purposes only. Maier CNC Swiss Type Lathe ML20D ProLine
Maier ML20D - Technical Details for illustration purposes only Maier CNC Swiss Type Lathe ML20D ProLine Machine concept & construction The machine base of all the Maier ProLine CNC Sliding Headstock Machines
More information3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT.
3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT www.haimer-usa.com HAIMER Sensors Benefits 1. No math needed Zero on the indicator = Zero on the machine control The sensor is pre-calibrated
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationPRODUCT CATALOGUE FOR GLASS ENGRAVERS
PRODUCT CATALOGUE FOR GLASS ENGRAVERS POLPUR, LTD. FOUNDED IN 1991, IS WHOLLY A CZECH COMPANY. We develop and produce polishing, lapping and grinding tools, especially for the glass, jewellery and optical
More informationAMADA MACHINE TOOLS EUROPE
AMADA MACHINE TOOLS EUROPE PRODUCT OVERVIEW MILLING TECHNOLOGY THV DUPLEX MILLING MACHINES PMH PLATE MILLING MACHINES AMADA MACHINE TOOLS Headquarters in Japan (Isehara) High-tech Development Centre near
More informationOptimum control of the grinding process thanks to reliable in-process measurement. SHARING EXCELLENCE
Movoline In-Process Metrology Optimum control of the grinding process thanks to reliable in-process measurement. SHARING EXCELLENCE Industrial Metrology Your partner for measuring solutions We deliver
More informationNEW HIGH-PRECISION TOOL GRIND CHUCK TGC P O
NEW HIGH-PRECISION TOOL GRIND CHUCK TGC P O HIGH-PRECISION TOOL GRIND CHUCK TGC P O Increase your productivity and lower your costs! Whenever high-performance tools are manufactured, there is a need for
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationStreamfinishing Process and application
Streamfinishing Process and application Dipl.-Ing. (FH) Dierk Telljohann OTEC Präzisionsfinish GmbH Dieselstrasse 8-12 75334 Straubenhardt www.otec.de Content 1. Definition and process description 2. SF
More informationFace Drivers FSP / FSPB
4 Face Drivers FSP / FSPB NEIDLEIN-SPANNZEUGE GmbH Face Drivers FSP / FSPB with drive disk and movable center pin The entire surface of the workpiece can be tooled and finished by clamping with a maximum
More informationFlat Grinding of Technical Ceramics
Flat Grinding of Technical Ceramics cost effective - fast - precise - By using lapping kinematics and patented grinding tools The historic lapping and also conventional flat grinding is still very popular.
More informationHigh Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
More informationNEW Product information
NEW Product information CL 200 Sharpening machine of TC-tipped circular saws on hook and clearance surface CL 200 The idea: Unique machining possibilities in only one clamping - especially for sharpening
More informationMovoline. In-Process Metrology
Movoline In-Process Metrology Industrial Metrology Your partner for measuring solutions We deliver solutions that help you optimize your manufacturing process regarding qualitative and economic objectives.
More informationReinforced all-rubber HSS seals. Reliable protection for large size bearings
Reinforced all-rubber HSS seals Reliable protection for large size bearings Reinforced all-rubber HSS seals The HSS seals are specially developed by SKF to protect large size bearings under the tough operating
More informationRSM 500 B CNC RSM 500 B CNC. CNC Cylindrical Grinding Machines
CNC Cylindrical Grinding Machines Multi-functional machine design plus highperformance Fagor 8055i FL-TCO ensure maximum precision and efficiency Center height 5 inch Max. grinding diameter 22 inch Workpiece
More informationFVL-VTC Series. Vertical Turning Lathes FVL VTC FVL VTC+C FVL-1600VTC+CY
FVL-VTC Series Vertical Turning Lathes FVL-1250 1600 2000VTC FVL-1250 1600 2000VTC+C FVL-1600VTC+CY 2 FVL-VTC Series Vertical Turning Lathe For Heavy-Duty Turning And Multi-Task Machining High-Precision
More informationTACCHELLA PULSAR H 375
TACCHELLA PULSAR H 375 CNC external cylindrical grinding machine in excellent conditions Manufacturer TACCHELLA Model PULSAR H 375 Year of manufacture 2013 Control SIEMENS SINUMERIK 840 D Solution Line
More informationKey data. Maximum performance for large workpieces. A member of the United Grinding Group
A member of the United Grinding Group Maximum performance for large workpieces Key data The has been specially designed for high-precision machining of large, heavy workpieces. This centerless grinding
More informationCLAMPING SYSTEM µ-prisfix-nano HIGH PRECISION PART PRODUCTION
R E F E R E N C E S Y S T E M S CLAMPING SYSTEM µ-prisfix-nano HIGH PRECISION PART PRODUCTION 0,1 µm changing accuracy 0,5 µm repetitive accuracy www.hirschmanngmbh.com EN 1847 COMPANY WE ABOUT US COMPETENCE
More informationDISC FINISHING MACHINES
Application Processing of small parts Larger parts (from approx. 50 g weight can also be processed individually) Thanks to high rotational speed and high relative speeds, reduction of processing times
More informationSLIDE SHAFT PRODUCTS. 777 Schwab Road, Suite T, Hatfield, PA Toll Free: Fax:
SLIDE SHAFT PRODUCTS Materials Materials of NB slide shafts are selected AISI 52100, 1060, and 0C (or equivalent) on the basis of hardenability, fatigue strength, wear resistance, and toughness. AISI
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationS20 The Compact for small precision components.
The Art of Grinding. A member of the UNITED GRINDING Group S20 The Compact for small precision components. Key data The S20 is a universal cylindrical grinding machine with electromechanical drives for
More informationS242. Key data. The flexible Machine for grinding and turning operations. A member of the UNITED GRINDING Group. The Art of Grinding.
The Art of Grinding. A member of the UNITED GRINDING Group S242 The flexible Machine for grinding and turning operations. Key data The S242 is a flexible hard-fine machining centre for grinding, turning
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 5: Milling Processes DR. SOTIRIS L. OMIROU Milling Machining - Definition Milling machining is one of the very common manufacturing processes used in machinery
More informationK E E P I N G T H E W O R L D I N M O T I O N TM P 90 G. Grinding and Hobbing Machine
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G Grinding and Hobbing Machine machine concept P 90 G three grinding methods + hobbing combined in one machine. The P 90 G is a new development based
More informationProduct Overview. Internal Grinding Machines. 5-Axis-Grinding Machines. Multifunctional Grinding Machines. Center - & Profile Grinding Machines
Product Overview Internal Grinding Machines 5-Axis-Grinding Machines Multifunctional Grinding Machines Center - & Profile Grinding Machines External & Jig Grinding Machines Special Grinding Machines A
More informationPlate Processing Centre. KF Range. The Kaltenbach Range
The Kaltenbach Range Semi and Fully Automatic Circular Sawing Machines Plate Processing Centre KF Range Semi and Fully Automatic Circular Sawing Machines for Non-Ferrous Materials Semi Automatic Bandsawing
More informationVario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationGash. End Face. Clearance angle. Flute APPLICATION GUIDE
Gash End Face Clearance angle Flute APPLICATION GUIDE TOOLGAL S BONDS TOOLGAL BONDS ARE DIVIDED INTO 4 MAIN GROUPS: Phenol group (Toolgal code CB) Pressed with thermal stability - 200 0 C Main applications:
More informationKPSM contour. grinding. KPSM Type For grinding of longitudinal profile up to 70 x 70 mm Flat grinding up to 600 mm width
KPSM contour precision grinding machine KPSM Type 2200-4200 For grinding of longitudinal profile up to 70 x 70 mm Flat grinding up to 600 mm width KPSM-SerieS Benefits Highly rigid construction The rigid
More informationShaftGrind S. Key data. Compact and extremely versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Compact and extremely versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationPPSM High Precision Profile Grinding. Machine. PPSM Type For grinding racks up to module 22, broaches, saw blades and special profiles
PPSM High Precision Profile Grinding PPSM Type 2200-10200 For grinding racks up to module 22, broaches, saw blades and special profiles PPSM-Series Benefits Highly rigid construction The rigid construction
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationPerfect fusion of resolution and dynamic.
[ That s ] E[M]CONOMy: Perfect fusion of resolution and dynamic. FAmup Linearmill 600 5 axes high-performance machining center FAmup Linearmill 600 [Tool turret] - 40 tool stations - Filling of the tool
More informationINSERT LINE. Key parameters. High-speed peripheral grinding machine for volume indexable insert production. A member of the UNITED GRINDING Group
Creating Tool Performance A member of the UNITED GRINDING Group High-speed peripheral grinding machine for volume indexable insert production Key parameters The is a 4-axis high-speed peripheral grinding
More informationFinish Hard Turning. up to part ø 450 mm. The hard turning company. Hembrug Mikroturn 100 Horizontal Series
Hembrug Mikroturn 100 Horizontal Series Finish Hard Turning up to part ø 450 mm narrow tolerances more flexibility higher productivity cost saving The hard turning company Hembrug finish hard turning Finish
More informationDEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS. Grinding machine Grinding fixture. botek. For regrinding single flute gundrills from Ø 0.
DEEP HOLE DRILLING SYSTEMS SOLID CARBIDE TOOLS botek Grinding machine Grinding fixture For regrinding single flute gundrills from Ø 0.5 mm The botek company Manufacturing deep and precise holes is a technical
More informationCOMPACT LINE. Key parameters. The versatile solution for indexable inserts. A member of the UNITED GRINDING Group. Creating Tool Performance
Creating Tool Performance A member of the UNITED GRINDING Group The versatile solution for indexable inserts Key parameters The offers maximum grinding performance with the smallest possible footprint.
More informationS30 The Classical for medium-sized precision components.
The Art of Grinding. A member of the UNITED GRINDING Group S30 The Classical for medium-sized precision components. Key data The S30 is a cylindrical grinding machine for medium-sized workpieces in individual
More informationTDE Equipment and Manufacturing. Cutting and Grinding Technology PRODUCT CATALOG
TDE Equipment and Manufacturing Cutting and Grinding Technology PRODUCT CATALOG TDE Equipment and Manufacturing VOKA is an international, recognizable brand which has been established for over 50 years
More informationSetting vertical boring machines for production
Unit 318 Setting vertical boring machines for production UAN: Level: 3 Credit value: 91 GLH: 210 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: F/600/5423 This
More informationDesign to Cost. emcoturn e25. CNC turning center for bar stock work up to Ø 25 mm (1 ) and also chucking work
[ That s ] E[M]CONOMy: Design to Cost. emcoturn e25 CNC turning center for bar stock work up to Ø 25 mm (1 ) and also chucking work EMCOTURN E25 [ Work area] - Free chip fall - Best ergonomics - Total
More informationFlexibility and efficiency on high accuracy machining
Permanent-electro magnetic systems for turning and vertical grinding Flexibility and efficiency on high accuracy machining No piece distortion or deformation Uniform clamping: minimized vibrations Complete
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationS110 / S120. Key data. The practical machines for your specific grinding solution. A member of the UNITED GRINDING Group. The Art of Grinding.
The Art of Grinding. A member of the UNITED GRINDING Group The practical machines for your specific grinding solution. Key data The are very flexible internal cylindrical grinding machines for machining
More informationCNC Grinding Center Model Evolution
CNC Grinding Center Model Evolution High-Precision Tool Grinding Machine with 5 Axes The newest dimension in tool grinding Quality without compromise The Model Evolution has been developed for the production
More informationTHE RIGHT LIVE CENTRE FOR EVERY APPLICATION. For small and large centres For cramped work area For lower-lying centres For large boreholes
THE RIGHT LIVE CENTRE FOR EVERY For small and large centres For cramped work area For lower-lying centres For large boreholes 2006 LIVE CENTRES The requirement for high cutting capacities and high working
More informationAccessories for the Model 920 Lapping and Polishing Machine
Accessories for the Model 920 Lapping and Machine Applications Laboratory Report Introduction polishing is a common practice in many materials preparation laboratories. Instrumentation for materials processing
More informationKELLENBERGER100 The universal platform for cylindrical grinding
KELLENBERGER100 The universal platform for cylindrical grinding KELLENBERGER 100 The new definition of a CNC cylindrical grinding machine 2 Universal workhead Applications with fixed or rotating spindle
More informationMiyano Evolution Line
Evolution Line CNC Turning center with 2 spindles, 2 turrets and 1 -axis slide BNJ-34/42/51 "Evolution and Innovation" is the Future What could not be done can be done. -axis movement is added to the traditional
More informationCamGrind S. Key data. Small and versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Small and versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees high-precision
More informationControl of the Grinding Process Using In-Process Gage Feedback
Control of the Grinding Process Using In-Process Gage Feedback PMRC Industrial Advisory Board Meeting Georgia Institute of Technology October 2000 David Longanbach Overview Research Objective Need for
More informationMATEC 30 HV KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)
MATEC 30 HV 2000 KISTNER GmbH & Co. KG Industriestraße 7-9 D-95349 Thurnau Tel. (+49) 9228 987-0 info@maschinen-kistner.de www.maschinen-kistner.de MACHINE INFO Manufacturer Type Year of manufacture Control
More informationGuidelines for Designing Guidelines for Designing
Guidelines for Designing 37 Spatula Method Spatula Method flat guideway s The undercut is provided after moulding by grinding-in (e. g. angular or parting-off grinder). Alternatively, the undercut can
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More informationVHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
More informationHauschild GmbH. Magazine systems, Process automation, Robotic machining cells, Sorters
GmbH Hauschild Hauschild GmbH Kohlfurther Brücke 69 42349 Wuppertal Germany Tel.: +49 202 24742-0 Fax: +49 202 24742-42 info@hauschildgmbh.com www.hauschildgmbh.com Magazine systems, Process automation,
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationGeneral advice on work safety
General advice on work safety To prevent injury to the lathe operator and other persons the relevant safety regulations laid down by the Professional Trade Association (UVV) must be observed at all times.
More informationContributed Article pv magazine Chinese edition (pvc) issue: Dec 2012 (4/12)
1/11 Image 1 Lead photo Outer diameter (OD) cutting saw Sawing: a fluid guided cutting disc in thin blade technology Efficient cutting Thin blade cutting technology and automation in ingot processing:
More informationFace Drivers FSB/SB. Clamping tools for tooling between centers. Type FSB with flange-retainer
Face Drivers FSB/SB Clamping tools for tooling between centers Type FSB with flange-retainer The entire surface of the work piece can be tooled and finished by clamping with a maximum of torque transmission.
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationKey data. Flexibility for medium-sized workpieces. A member of the United Grinding Group
A member of the United Grinding Group Flexibility for medium-sized workpieces Key data The combines precision and highest productivity in a single machine. Its modular design allows the centerless grinding
More informationLightweight HSC milling cutter for a perfect surface finish. flycutter - system eco
Lightweight HSC milling cutter for a perfect surface finish flycutter - system eco 2 milling FlyCutter - System Eco mapal FlyCutter - System Eco The FlyCutter series represent a new dimension in face milling
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationHYDRAULIC ZERO-REACH ARBORS. Zero-reach arbors with hydraulic chuck and matching POKOLM accessories
HYDRAULIC ZERO-REACH ARBORS Zero-reach arbors with hydraulic chuck and matching POKOLM accessories HYDRAULIC ZERO-REACH ARBORS ARBOR AND ADAPTER SYSTEMS HYDRAULIC ARBORS AND ADAPTERS: OUTSTANDING TOOL
More informationTotal Related Training Instruction (RTI) Hours: 144
Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Benchwork and Layout Layout tools Tapping Reaming Filing Engraving Stamping Unit 2: Cutting and Drilling Cutting Operations Drilling Operations
More information