System furniture IDEAL

Size: px

Start display at page:

Download "System furniture IDEAL"

Marjory Cunningham
5 years ago
Views:

1 System furniture IDEAL

Features An extensive certifi ed range A wide range of furniture to answer all of the users needs - Metal legs, I-shaped or L-shaped - Fixed or height-adjustable legs - types of

Integrated and ingenious cable management - cables can be led down from the top to the structure via the EOL cable ports, - horizontal cable management thanks to the optional

2 Features An extensive certifi ed range A wide range of furniture to answer all of the users needs - Metal legs, I-shaped or L-shaped - Fixed or height-adjustable legs - types of structure : beam, supporting melamine or metal modesty panel. Integrated and ingenious cable management - cables can be led down from the top to the structure via the EOL cable ports, - horizontal cable management thanks to the optional cable trough attached to the structure and facilitating the storage of cables and trailing sockets, - vertical cable management thanks to an ABS cable channel on the inner side of the leg. FCBA ISO Manufactured to PEFC/ Made in our facilities year guarantee 2 system furniture - Ideal

3 Overview in cm Rectangular desks Asymmetrical wave desks 160 Symmetrical wave desks Asymmetrical compact desks Curved compact desk / Symmetrical compact desks 140/160 Extension units , Shade card Melamine top finishes Snow white White maple Light oak Salmon beech French apple Amber walnut Metal leg finishes White RAL 9010 Aluminium grey RAL 9006 Graphite grey RAL 7016

2 1 Worktops 1 Tops made from 25 mm thick particle board, density 60 to 710 kg/m³. The particle board is overlaid with a decorative monochrome or wood decor sheet.

Fire safety classifi cation : M (combustible, moderately fl ammable) compliant with the French standard NF EN 1501-1. Particle board is also classifi ed E1 (control of formaldehyde emissions) with 6.

2 Glued edging of fl attened design, made from 2 mm thick ABS (Acrylonitrile Butadiene Styrene), rounded at the top and bottom for increased user comfort. Edging matching the top fi nish.

4 2 1 Worktops 1 Tops made from 25 mm thick particle board, density 60 to 710 kg/m³. The particle board is overlaid with a decorative monochrome or wood decor sheet. 2 sides of the fi nish treated against refl ection. The material used for the tops comes from sustainably managed forests (PEFC). Fire safety classifi cation : M (combustible, moderately fl ammable) compliant with the French standard NF EN Particle board is also classifi ed E1 (control of formaldehyde emissions) with 6.5 mg HCNO/100 mg, compliant with the French standard NF EN Glued edging of fl attened design, made from 2 mm thick ABS (Acrylonitrile Butadiene Styrene), rounded at the top and bottom for increased user comfort. Edging matching the top fi nish. Structures fi xed to tops by means of screwed metal inserts, facilitating the assembly/disassembly and guaranteeing an excellent result of 140 kg per insert in the extraction resistance test. Tops feature 2 pre-drilled openings to insert one or two optional cable ports ø mm : Circular cable port, comprising an eol. (ø 60 mm) snap-in cap and a ring integrated in the top matching the leg fi nish. 4 Circular cable port, allowing you to charge your smartphone battery wirelessly through inductive electrical power transfer between the Aircharge module and the smartphone receiver. 5 Square socket port for direct connectivity, featuring a retractable cover. Allows power and data connectivity direct from the worktop. Fitted with a EUR power socket + 1 RJ45 and 1 USB 5U (charge) socket

Fixed metal «I» shaped leg Tubular-design leg, machine-welded for increased robustness, comprising : 1 Top cross-beam made from folded sheet steel 6 x 42 mm, laser cut steel ( mm thick) and fixed to

5 mm thick. W. 6 x D. 65 mm. TRAVERSE SUPERIEURE TOLE EP.2.5mm 1 TOP CROSS-BEAM STEEL SHEET mm thick UPRIGHT STEEL SHEET 1.5 mm thick MONTANT TOLE EP.1.5mm 2 4 ACCROCHE POUTRE TOLE EP.

5 Fixed metal «I» shaped leg Tubular-design leg, machine-welded for increased robustness, comprising : 1 Top cross-beam made from folded sheet steel 6 x 42 mm, laser cut steel ( mm thick) and fixed to the top by means of 2xM6 screws (one on each end of the cross-beam). 2 Upright made up of 1 tube welded to the top cross-beam to support the top, 1.5 mm thick and welded to the metal base. EOL logo on metal plate in the upper section. PVC cable channel allowing vertical cable management and separation. The top and bottom section feature an opening allowing cables to enter/ exit the leg. 4 1 cable bracket to attach the cross-beam, made from 4 mm thick steel sheet welded to the inside upright of the structure. 5 Metal base, welded to the 2 vertical uprights, made from pressed steel, 2.5 mm thick. W. 6 x D. 65 mm. TRAVERSE SUPERIEURE TOLE EP.2.5mm 1 TOP CROSS-BEAM STEEL SHEET mm thick UPRIGHT STEEL SHEET 1.5 mm thick MONTANT TOLE EP.1.5mm 2 4 ACCROCHE POUTRE TOLE EP.4mm BEAM BRACKET STEEL SHEET 4 mm thick PASSE CABLES PVC CABLE CHANNEL PVC 6 Circular stabilizer feet (Ø 8 mm), made from injection moulded black polypropylene and screwed to the tubular base, adjustable through 15 mm. Epoxy powder coating finish for all of the metal components. Worktop height : 75 mm (on top). The fixed I-shaped leg is only available with the beam structure. EMBASE TOLE EP.2.5mm BASE UNIT PRESSED STEEL 2.5 mm thick 5 6 VERIN 8 M8 STABILIZER FOOT Ø 8 mm ,5 Top cross-beam made from folded steel sheet, with «eol» logo Pressed steel base fitted with stabilizer feet Horizontal cable management by means of an optional cable trough, vertical cable management by means of an ABS cable channel 5 system furniture - Ideal

Excentric metal «L» shaped leg, epoxy lacquer finish Tubular-design leg, machine-welded for increased robustness, comprising : 1 Top cross-beam made from folded sheet steel 6 x 42 mm, laser cut steel

4 1 cable bracket to attach the cross-beam, made from 4 mm thick steel sheet, welded to the inside of the structure. 5 Metal base, welded to the 2 vertical uprights, made from pressed steel, 2.5 mm.

6 Excentric metal «L» shaped leg, epoxy lacquer finish Tubular-design leg, machine-welded for increased robustness, comprising : 1 Top cross-beam made from folded sheet steel 6 x 42 mm, laser cut steel ( mm thick) and fixed to the top by means of 2xM6 screws (one on each end of the cross-beam); 2 Upright made up of 1 tube, welded to the top cross-beam to support the top, 1.5 mm thick and welded to the metal base. EOL logo on pressed steel plate in the top section. The PVC cable channel allows to separate and channel down the cables. The top and bottom section feature an opening allowing cables to enter/ exit the leg. 4 1 cable bracket to attach the cross-beam, made from 4 mm thick steel sheet, welded to the inside of the structure. 5 Metal base, welded to the 2 vertical uprights, made from pressed steel, 2.5 mm. W. 6 x D. 65 mm ; 6 Circular stabilizer feet (Ø 8 mm), made from injection moulded black polypropylene, and screwed to the tubular base, adjustable through 15 mm; Epoxy powder coating finish for all of the metal components. Worktop height : 75 mm (on top). The excentric L-shaped leg is available with the beam structure and structure with metal or melamine modesty panel. TRAVERSE SUPERIEURE TOLE EP.2.5mm TOP CROSS-BEAM STEEL SHEET mm thick MONTANT TOLE EP.1.5mm UPRIGHT STEEL SHEET 1.5 mm thick 5 PRESSED STEEL BASE 2.5 mm thick 1 2 ACCROCHE POUTRE TOLE EP.4mm PASSE CABLES PVC EMBASE TOLE EP.2.5mm 6 VERIN 8 M8 4 BEAM BRACKET STEEL SHEET 4 mm thick PVC CABLE CHANNEL STABILIZER FOOT Ø 8 mm 6 12 T 709,5 Beam structure Metal modesty panel structure Melamine modesty panel structure 6

Centered metal height-adjustable «I» shaped leg, epoxy lacquer finish One-piece construction leg and entirely welded for increased robustness, comprising : 1 Top cross-beam made from folded steel

7 Centered metal height-adjustable «I» shaped leg, epoxy lacquer finish One-piece construction leg and entirely welded for increased robustness, comprising : 1 Top cross-beam made from folded steel sheet 6 x 42 mm laser cut steel, mm thick and fixed to the top by means of 2xM6 screws (one on each end of the crossbeam); 2 Upright comprising : - upper vertical column made from curved and folded steel sheet (2 mm thick) with in the centre section a metal clamp panel (2 mm thick) cut and machined in the centre (vertically) for height-adjustment at 20 mm intervals ; - lower vertical column made from folded steel sheet (1.5 mm thick) and reinforced in the centre with a welded clamp panel (2 mm). This lower part is welded onto the base. This mechanism allows the leg to be adjusted through a sliding movement. The lower vertical column is tightened at the desired height, by means of metric screws; A metal housing panel (0.7 mm thick) allows easy access to the cables; 4 1 beam bracket to attach the cross-beam, made from 4 mm thick steel sheet and welded to the inside of the structure 5 Metal base welded to the vertical upright, base made from pressed steel sheet, 2.5 mm thick. W. 6 x D. 65 mm; 6 Circular stabilizer feet (Ø 8 mm), made from injectionmoulded black polypropylene and attached with screws to the tubular base, adjustable through 15 mm ; Epoxy powder coating finish for all of the metal components. Adjustable in height from 620 to 860 mm at 20 mm intervals (on top). The centered I-shaped leg is only available with the beam structure. Note : a set of 8 spacers is optionally available to raise the height of desk height pedestal by 20 or 40 mm in line with height-adjustable desks. BEAM BRACKET STEEL SHEET 4 mm thick CLAMP PANEL UPPER PART STEEL SHEET 2 mm thick HOUSING PANEL STEEL SHEET 0.7 mm thick 620 bis CLAMP PANEL LOWER PART STEEL SHEET 2 mm thick 1 2 TOP CROSS-BEAM STEEL SHEET mm thick UPRIGHT - UPPER PART STEEL SHEET 2 mm thick UPRIGHT - LOWER PART STEEL SHEET 1.5 mm thick 5 PRESSED STEEL BASE 2.5 mm thick 6 12,5 STABILIZER FOOT Ø 8 mm 7 system furniture - Ideal

Supporting metal beam 1 The structure is secured by a tubular cross-beam, connecting the 2 legs for increased stability and a perfect perpendicular position of the structure.

It is fi xed to the top cross-bar of the legs with screws to the beam bracket, made of 4 mm thick steel sheet.

8 Supporting metal beam 1 The structure is secured by a tubular cross-beam, connecting the 2 legs for increased stability and a perfect perpendicular position of the structure. 1 2 This supporting beam is of tubular design and has a cross-section 50 x 20 mm (1.5 mm thick). It is fi xed to the top cross-bar of the legs with screws to the beam bracket, made of 4 mm thick steel sheet. This assembly concept allows various confi gurations to be created ; The beam structure is available with I-shaped legs, in either a fi xed or height-adjustable version, as well as with L-shaped legs. The beam can be fi tted with an optional metal cable trough to facilitate horizontal cable management and the storage of trailing sockets Symmetrical compact desk asymmetrical structure Symmetrical compact desk symmetrical structure 8

Supporting metal modesty panel 1 The supporting metal modesty panel connects the two legs, ensuring the stability of the desks and the rigidity of the tops.

9 Supporting metal modesty panel 1 The supporting metal modesty panel connects the two legs, ensuring the stability of the desks and the rigidity of the tops. Metal modesty panel, made from folded sheet steel (0.7 mm thick) in an epoxy lacquer finish, matching the legs. Overall dimensions : D. 20 x H. 00 mm. Fixed to the legs by means of metric screws. Structure with a supporting metal modesty panel available with the fixed L-shaped legs. 2 An opening in the top and bottom section, Ø 50 mm, allows the cables to be fed through from the top to the cable trough or to the ABS channel in the leg. The modesty panel can be fitted with an optional metal cable trough to facilitate cable management and the storage of trailing sockets. Attached to the legs by means of screws and excentric clamps. 649,5/1.049,5/1.249,5/1.449,5/1.649, system furniture - Ideal

Supporting melamine modesty panel 1 The supporting melamine modesty panel connects the two legs, ensuring the stability of the desks and the rigidity of the tops.

2 An opening (Ø 60 mm) in the top section on each side, featuring an aluminium grey ABS ring, allows the cables to be fed through from the top to the structure.

Attached to the legs by means of screws and eccentric clamps. 649,5/1.049,5/1.249,5/1.449,5/1.

10 Supporting melamine modesty panel 1 The supporting melamine modesty panel connects the two legs, ensuring the stability of the desks and the rigidity of the tops. Rectangular melamine modesty panel, 25 mm thick, finish matching the top. Overall dimensions : D. 25 x H. 00 mm ; The structure with the melamine modesty panel is available with fixed L-shaped legs. 2 An opening (Ø 60 mm) in the top section on each side, featuring an aluminium grey ABS ring, allows the cables to be fed through from the top to the structure. The modesty panel can be fitted with an optional metal cable trough to facilitate cable management and for the storage of trailing sockets. Attached to the legs by means of screws and eccentric clamps. 649,5/1.049,5/1.249,5/1.449,5/1.649,5 00 Round tubular legs Used for asymmetrical 90 compact desks without a desk height pedestal on the return side, as well as for extension units and in some cases for the circular meeting table. Welded metal leg, in a epoxy lacquered finish, comprising : 1 1 plate fixed with 4 screws under the top and welded to the upright ; 2 1 circular upright Ø 60 mm ; 1circular stabilizer foot, adjustable through 15 mm, made from injection-moulded black polypropylene. Worktop height for the version with fixed legs : 75 mm (on top). Worktop height for the version with height-adjustable legs : from 620 to 860 mm (on top). Fixed leg Heightadjustable leg 10

Cable management 1 Cable ports Tops are fitted with 1, 2 or 4 cable ports matching the leg finish, comprising a ring integrated in the top (ø 8 cm) and an «eol.» snap-in cap (ø 60 mm).

Charging occurs through inductive electrical power transfer between the Aircharge module and the smartphone receiver.

11 Cable management 1 Cable ports Tops are fitted with 1, 2 or 4 cable ports matching the leg finish, comprising a ring integrated in the top (ø 8 cm) and an «eol.» snap-in cap (ø 60 mm). 1 2 AIRCHARGE : The Aircharge port allows you to charge your smartphone battery wirelessly. Charging occurs through inductive electrical power transfer between the Aircharge module and the smartphone receiver. For wireless charging to be possible, the smartphone needs to be enabled with the necessary QI inductive charging receiver technology, either integrated from stock or fitted retroactively thanks to a QI casing. Fitted in the location of cable port openings Ø mm. Simply insert the Aircharge module into the cable port opening and connect it to a USB port on your desktop PC. Choice of either a white SO or black SG finish (+ fin.). 2 Square socket port for direct connectivity. Socket port featuring a retractable cover allowing power and data connectivity straight from the worktop. Fitted with a EUR power socket + 1 RJ45 and 1 USB 5U socket. Feeder cables included. Fits on to all worktops in the location of cable port openings Ø mm. Depth of module from underside of worktop: 82.5 mm. Made from ABS in a white SO or black OF finish. W. 124 x D. 90 cm. 4 Optional metal cable trough Trough made from 1 mm thick steel sheet, finish matching the legs. Fixed on to the metal cross-beam or the metal and melamine modesty panels. Can also be attached to the top by means of screws and metal inserts. Cable trough for desks from W. 0 to 10 mm. Usable dimensions : D. 129 x H. 100 mm. Usable widths : Desks W. 0 mm : 700 mm Desks W mm : 900 mm Desks W mm : 1100 mm Desks W. 10 mm : 100 mm 2, system furniture - Ideal

12 Standards ISO Manufactured to ISO is an international reference recognized as an environmental management system. Based on the principle of continuous improvement (or the Deming circle), it s intention is to identify, verify and master the environmental aspects of all organisms and specify how to control the entire system. You have chosen our IdoL range of office furniture, one that has been attributed the NF Office Excellence Certified, NF Environment Furniture and GS certification. This means that these desks are designed to have a minimal impact on the environment throughout their product life-cycle. These are first-rate products, benefiting from superior build quality and design (compliant with standards such as the NF Office Excellence Certified), with their environmental impact assessed based on 20 different criteria. Our production facilities undergo a yearly inspection. Ideal is a highly ergonomic solution for the office space. It offers a choice of both fixed and height-adjustable desks that provide a high degree of flexibility, adapted to the morphology and needs of different users. Cable management solutions are seamlessly integrated in the design : from the cable ports on the worktop, the structure and the legs suitable for guiding and storing cables to the separation of different types of cables. For cleaning and maintenance purposes we recommend the use of non-abrasive products, preferably water-based, containing a light detergent, soap or alcohol (e.g. glass cleaner), avoiding prolonged contact at all times (test the product on a small hidden surface first). For melamine worktops, we recommend the use of a dry cloth and water with a little detergent. Avoid using powderbased products and only use products with a neutral PH. Note: the White (MG) finish is not resistant to Eosine staining. We commit to stocking spare pieces and parts (by the unit) to enable the repair or replacement of components, for up to 5 years after the furniture product range ceases production; slight differences in shade or colour may nonetheless be possible. This item of furniture is over 97% recyclable. Once the product has reached the end of its usable life, we recommend that you return it to one of our facilities where it can be dismantled efficiently: all elements containing combined materials can be disassembled into their component parts, and the nature of plastics weighing over 50 g is clearly marked on the parts. In France, the eco-organisation Valdélia ( can provide assistance in determining how best to manage the disposal of large volumes of office furniture. The NF Environnement brand combines efficiency and ecology : - Quality /Durability - Health / Security - Environment Find out more about the NF Environment Furniture certification on Institut Technologique FCBA 10 rue Galilée Champs-sur-Marne Preserve a copy of this leaflet throughout the lifespan of your office furniture. FCBA GS is a certification mark indicating the product meets the prevailing German laws concerning the safety of technical equipment. The PEFC brand guarantees that the purchased product comes from responsible sources and that through your purchase you participate in sustainable forest management. PEFC/

System furniture. 4Line

System furniture. 4Line System furniture 4Line Features Easy to assemble and capable of adapting to evolving usage requirements 4Line is one of the solutions available in our System furniture collection, aiming to answer all