Picnic Furniture. 50 telephone:

Transcription

1 Picnic Furniture Disabled access is an increasingly important consideration when specifying picnic furniture, so our range has been expanded to accommodate this issue. Provision can be made either in an open and obvious way or covertly, depending on the nature of the location. Products with a disabled access provision have a DA suffix. Unlike some of the lighter all wooden furniture on the market, which is aimed primarily at the non-municipal sector, our products are hard wearing and maintainable. Styled to match our seats and bins, they are available in various types, to suit different environments, and most seat six to eight people. Picnic units (which have integral seats and tables) are all supplied in pedestal base form as standard (to bolt down), and can be supplied with galvanised ground fixing extensions to concrete them in if required. The ground fixing extensions are attached by stainless steel coach bolts to prevent them being tampered with. Picnic sets (which have the seats and tables as separate units) are supplied with extended legs (for concreting in), as standard. 50 telephone:

2 LAKELAND PICNIC SET An attractive circular picnic set, especially suitable as a feature in a landscape scheme. It is supplied with a central hole for a parasol, and when supplied in standard form with an extended leg to concrete in, has a single large diameter post supporting the table. These units look particularly effective when used in conjunction with curved units from our Universal Bench System (see page 30), and the Ruthin or Cambridge circular litter bins (see pages 44-45). A DA version providing excellent disabled access is available. Boards 32 x 145mm finished See pages for timber specifications and finishes Frames 140 x 5mm circular hollow table leg and 60 x 3mm Seat height 482mm, table height 792mm Frames finished in either Acrylic Coating or Street-Tough in black as standard (see page 77), eleven other colour options at no extra cost (see page 80) Supplied with extended legs (for concreting in), as standard. Weight approx. 133kg. For installation recommendations see pages Ø1044 Lakeland Picnic Sets with optional layout Clear access Ø mm clear FENLAND PICNIC SET A smaller circular picnic set, for drinks and light snacks, suitable for use by four people in restricted spaces. It is supplied with a central hole for a parasol, and when supplied in standard form with an extended leg to concrete in, has a single post supporting the table. A DA version providing disabled access is available. Boards 32 x 145mm and 32 x 95mm finished See pages for timber specifications and finishes Frames 89 x 4mm circular hollow table leg and 60 x 3mm Seat height 482mm, table height 792mm Frames finished in either Acrylic Coating or Street-Tough in black as standard (see page 77), eleven other colour options at no extra cost (see page 80) Supplied with extended legs (for concreting in), as standard. Weight approx. 72kg. For installation recommendations see pages Standard configuration Ø700 Standard configuration Fenland Picnic Set 1600 Disabled access (DA) configuration 1215 Ø700 Disabled access (DA) configuration (configured for disabled access) 300mm clear 800 Clear access Picnic Furniture 51

3 HIGHLAND DA PICNIC SET An elegant horseshoe shaped picnic set, with ample provision for dining. It is supplied with a central hole for a parasol. Excellent covert disabled access is provided at the open end of the table. Boards 32 x 145mm finished See pages for timber specifications and finishes Frames 89 x 4mm circular hollow table legs and 60 x 3mm Seat height 482mm, table height 792mm black as standard (see page 77), eleven other colour options at no extra cost (see page 80) Supplied with extended legs (for concreting in), as standard. Weight approx. 120kg. For installation recommendations see page mm clear Highland DA Picnic Set HEADLAND DA PICNIC SET A rectangular picnic set, with ample provision for dining. It is supplied with a central hole for a parasol. Excellent disabled access is provided on both sides of the table. Boards 32 x 145mm finished See pages for timber specifications and finishes Frames 89 x 4mm circular hollow table legs and 60 x 3mm Seat height 482mm, table height 792mm black as standard (see page 77), eleven other colour options at no extra cost (see page 80) Supplied with extended legs (for concreting in), as standard. Weight approx. 112kg mm clear (configured for disabled access) Headland DA Picnic Set 52 telephone:

4 WOODLAND PICNIC UNIT Constructed from green European oak, treated softwood or iroko (described in detail on pages 73-76), this substantial unit has been designed to blend into, or create, rural environments such as country parks, riverside walks and forest paths. Galvanised reinforcing brackets add to the strength of this unit without detracting from its appearance. A disabled access (DA) version is available with the table boards extended on one end by 200mm, for a small additional cost. The top face and edges of each seat board are planed, the remaining components being rough sawn. When specified in iroko, all the surfaces are planed and sanded. Table boards 47 x 145mm approx. finished (45 x 145mm in iroko) Seat boards 47 x 1 approx. finished (45 x 95mm in iroko) Woodland Picnic Unit in European oak Frames 75 x 125 mm and 75 x 100mm approx. finished (70 x 125mm & 70 x 100mm in iroko) Length 1800mm, weight approx. 150kg. European oak or treated softwood finished in a dark oak coloured spirit based wood stain, see pages Iroko supplied planed and sanded, see page 73 K9 galvanised ground fixing extensions, 500mm long, are available to concrete the unit in, as shown on the adjacent illustration UPLAND PICNIC UNIT A robust integral unit, with boards of green European oak or treated softwood (described in detail on pages 74-76) and brown finished steel frames, designed for semi-rural locations. It combines the rustic appeal of our Woodland picnic unit with the strength of our steel framed units. The 2300 DA version provides good wheelchair access. Table boards 47 x 145mm approx. finished Seat boards 47 x 1 approx. finished Frames 50 x 50 x 3mm hollow, with 50 x 75 x 3mm hollow table legs Boards finished in brown wood stain brown 08B29 as standard (see page 77), eleven other colour options at no extra cost (see page 80) Upland Picnic Unit Picnic Furniture 900 Clear access 2300 Upland DA Picnic Unit Supplied with pedestal base mounting (for bolting down), as standard the unit down Length 1800mm, weight approx. 134kg., Length 2300mm weight approx 162kg 53

5 BROADLAND PICNIC UNIT Broadland Picnic Unit A popular and economical picnic unit, suitable for general purposes, particularly more formal parks and picnic areas. Boards 32 x 95mm finished Boards available in Iroko or seasoned oak See pages for timber specifications and finishes Frames 50 x 50 x 3mm hollow, with 50 x 75 x 3mm hollow table legs 1373 Length 1800mm, weight 665 approx. 74kg. Frames finished in either Acrylic Coating or Street- Tough in black as standard (see page 77), eleven other colour options at no extra cost (see page 80) Supplied with pedestal base mounting (for bolting down), as standard the unit down HEATHLAND PICNIC UNIT Heathland Picnic Unit with red boards An integral picnic unit with recycled plastic boards generally similar to our Broadland wooden boarded type, but having an additional central frame for extra rigidity. Red, yellow, blue or green polyboards give this unit real impact for play areas. Polyboards 50 x 95mm Polyboards in brown as standard, also available in black, (or 1373 blue, green, red or yellow at 665 additional cost) see page 58 Frames 50 x 50 x 3mm hollow, with 50 x 75 x 3mm hollow table legs Length 1800mm, weight approx. 123kg Pedestal base (for bolting down) as standard the unit down dark green 14C40 as standard (see page 77), eleven other colour options at no extra cost (see page 80) For installation recommendations see page CUMBERLAND PICNIC UNIT Cumberland Picnic Unit This unit seats six to eight people and is specifically designed for use in parks and other high usage public areas. Unlike some of the lighter all wooden furniture on the market, which is aimed primarily at the non-municipal sector, this product is hard wearing and maintainable. The boards are secured by 10mm BZP coach bolts with washers and plain nuts. There is a hole for a parasol as standard. Table boards 44 x 195mm finished Seat boards 44 x 2 finished Boards supplied in planed kiln dried treated softwood (see page 76) Boards finished in a light oak coloured spirit based wood stain Frames 50 x 50 x 3mm hollow, with 50 x 75 x 3mm hollow legs Supplied with pedestal base mounting (for bolting down), as standard the unit down Length 1800mm, weight approx. 82kg. Frames finished in Acrylic 1370 Coating in black as standard 635 (See page 77) For installation recommendations see pages telephone:

6 GLENSIDE PICNIC UNIT Glenside Picnic Unit An exceptionally rugged, almost indestructible picnic unit, designed for sites where facilities need to be provided, but the threat of vandalism is known to be high. To keep costs down these units are offered in our Acrylic Coating (ungalvanised) as standard. They can be Street - Tough finished if required. A disabled access (DA) version is available with the table boards extended on one end by 200mm, for a small additional cost. Acrylic Coating in dark green 14C40 as standard. Street-Tough finish available. Eleven other standard colour options at no extra cost (see page 80) Also available in any other B.S. or RAL colour for a surcharge Frames 50 x 50 x 3mm and 50 x 75 x 3mm hollow. Slats 50 x 100 x 2mm hollow. Length 1800mm, weight approx. 125kg. Pedestal base (for bolting down) as standard the unit down. HILLSIDE PICNIC UNIT An exceptionally rugged, almost indestructible all steel A frame picnic unit, designed for sites where facilities need to be provided, but the threat of vandalism is known to be high. To keep costs down these units are offered in our Acrylic Coating (ungalvanised) as standard. They can be Street-Tough finished if required. A disabled access (DA) version is available with the table boards extended on one end by 200mm, for a small additional cost. Acrylic Coating in green 14C40 as standard. Street-Tough finish available. Eleven other standard colour options at no extra cost (see page 80) Also available in any other B.S. or RAL colour for a surcharge Frames 50 x 100 x 2mm and 40 x 80 x 3mm hollow Slats 50 x 100 x 2mm hollow 815 Hillside Picnic Unit Length 1800mm, weight approx. 120kg. Pedestal base (for bolting down) as standard K1 rawl bolts or K4 extended rawl bolts are available to bolt the unit down. K5C (225mm long), or K11C (400mm long) galvanised For installation recommendations see page 25 (K5C/K11C) and page 56 (K1/K4) Picnic Furniture Summary of options available for picnic furniture Pedestal Extended K1 K1T K3 K3T K4 K4T K5C K9 K10 K10T K11C K13C K14C Base Legs Lakeland Fenland Highland Headland Woodland Upland Broadland Heathland Cumberland Glenside Hillside 55

7 or 50mm concrete slabs K4/K4T Picnic set flanged leg Installation Recommendations K4 M10 x 180 hex head bolt Tubular spacing sleeve K1/K1T 1. Rawl bolts (K1, K1T, K3 or K3T) paviours Picnic furniture can be rawl bolted to an existing K1/K1T Picnic set Picnic set flanged Block flanged leg Sand/cement semi dry screed leg K1T M10 x 80 Pin-in-socket surface of sound concrete, or well laid K1 M10 K1 M10 Picnic x 80 x 80 set hex hex flanged head head bolt leg bolt K1T M10 x 80 Pin-in-socket traditional size concrete or stone slabs, using cap Expanding K1T head M10 shell bolt x 80 of Pin-in-socket rawl bolt K1 M10 x 80 hex head bolt these M10 rawl bolts. This method is not Concrete cap head foundation bolt 100mm concrete base 100mm normally suitable for installing picnic furniture or 50mm concrete concrete base slabs or 100mm 50mm concrete base slabs onto small block paviours. All the bolts in these or 50mm concrete options are stainless steel. K4/K4T K1, K3 have hex head bolts K3/K3T K1T, K3T have tamper resistant pin-insocket s to reduce the risk of K4 M10 K3T M pin-in-socket K4/K4T Picnic set flanged leg K3 cap M10 head x 110 bolt hex head bolt Picnic K1/K1T x 180 set hex flanged head leg bolt cap Tubular head spacing bolt sleeve unauthorized removal K4 M10 x Picnic 180 hex set head flanged bolt leg Tubular paviours spacing sleeve K1T M10 x 80 Pin-in-socket K1 M10 x 80 hex head bolt Block 100mm cap Sand/cement paviours head concrete bolt semi base dry screed or 50mm concrete slabs Sand/cement semi dry screed Block 100mm Expanding concrete shell of base rawl bolt or 50mm concrete slabs K10/K10T Expanding Concrete shell foundation of rawl bolt 2. Extended rawl bolts and spacers K10 M10 x (or 180 more) hex head bolt Concrete foundation (K4, K4T, K10 or K10T) K10T M10 K4/K4T x 180 pin-in-socket For the installation of picnic units onto small Picnic set flanged leg block paviours, typically thick, we K3/K3T K4 M10 x 180 hex head bolt Block paviours recommend either the K4, K4T, K10 or K10T K3 Tubular M10 spacing x 110 hex sleeve head bolt Picnic K3/K3T unit spacing sleeve frame base K3T M10 x 110 pin-in-socket M10 x 180, extended rawl bolts, with semi collapsible spacing tubes. The spacing tubes Tubular K3 M10 paviours x 110 hex head bolt Picnic unit frame base Sand/cement cap head semi boltdry screed K3T Sand/cement M10 x 110 semi pin-in-socket dry screed Block Expanding shell of rawl bolt hold the rawl bolt shell in the concrete (which must be laid beneath the paviours) whilst the (or 100mm concrete base more) Concrete Expanding or 50mm foundation concrete shell of slabs rawl bolt 100mm concrete base bolt is being tightened. It is recommended that or Concrete 50mm concrete foundation slabs the paviours in the area of the units are bedded on top of the concrete using a semi dry sand K10/K10T K13C/K14C cement screed about thick. These kits K10 M10 K10/K10T x 180 hex head bolt are also suitable for fixing units onto surfaces of K10T K13C, M10 K14C x M x pin-in-socket 60 Picnic Picnic unit unit frame frame base base K10 M10 K3/K3T x 180 hex head bolt cap dome head head bolt coach bolt bituminous macadam, laid on top of concrete. K10T M10 x 180 pin-in-socket Picnic K3 M10 unit x frame 110 hex base head bolt All the bolts in these options are stainless steel. cap Picnic head unit bolt frame yyyy base K3T Block M10 paviours x 110 pin-in-socket K4, K10 have hex head bolts Macadam cap head surfacing spacing boltsleeve (or Block block paviours paviours) K4, K10T have tamper resistant pin-insocket s to reduce the risk of Tubular Sand/cement spacing semi sleeve dry screed yyyy Sub 100mm base concrete base Sand/cement or Expanding 50mm concrete shell semi of dry slabs rawl screed bolt unauthorized removal Tubular Leg extension Expanding Concrete shell foundation of rawl bolt (or more) bedding K10/K10T Concrete foundation K10 M10 x 180 hex head bolt 3. Galvanised ground fixing K10T K13C/K14C M10 x 180 pin-in-socket extensions (K13C or K14C) K13C/K14C These extensions have the advantage of K13C, K14C M10 x 60 dome head coach bolt Block paviours offering a very strong and permanent K13C, K14C M10 x 60 spacing sleeve installation, though they are more work than the yyyy other fixing kits. This means of fixing is suitable Sand/cement semi dry screed Tubular dome head coach bolt Macadam surfacing yyyy (or block paviours) for grassed areas, small block paviours and Expanding shell of rawl bolt yyyy Macadam surfacing Sub base macadam surfaces. The extensions are bolted to (or block paviours) (or more) Concrete foundation the underside of the picnic units, which are yyyy Sub Leg base extension then positioned in four previously dug holes. The holes are then back filled with concrete and Concrete bedding the ground surface made good around the K13C/K14C Leg extension Concrete bedding units. The coach bolts in these options are K13C, K14C M10 x 60 stainless steel. The K13C options are 225mm dome head coach bolt long, and the K14C options are 400mm long. yyyy K13C and K14C have coach bolts (which Macadam surfacing are very tamper resistant, but the head needs (or block paviours) to be removed with a grinder if ever the unit yyyy Sub base needs to be moved). Leg extension Concrete bedding 56 telephone: