Connect by Ecophon engineered for your convenience
|
|
- Peregrine York
- 6 years ago
- Views:
Transcription
1 Connect by Ecophon engineered for your convenience Connect Accessories - Connect Accessories others Product Connect Covering cup White plastic cup to cover fixings in the soffit, used together with Connect Adjustable wire hanger White 8 * Connect Demounting tool White plastic(pp) magnet tool used when demounting Master Rigid A and E White 1 * Connect E-plug Galvanized and coated steel. To cover gap between T15- profile and Shadowline trim/coved wall trim in Focus E T15 installations. 16 8,5 Connect white 100 * Connect E-plug Galvanized and coated steel. To cover gap between T-profile and Shadowline trim/coved wall trim in Focus E T24/Master E/Combison Duo E installations. 25 8,5 Connect white 100 * Connect E-plug Galvanized and coated steel. To cover gap between T24-profile and Shadowline trim/coved wall trim in AdvantageE/Gedina E T24 installations. 25 5,5 Connect white 100 * Connect Edge Tool E For cutting edge E, T24 and T15 perimeter tiles * Connect Edge tool Dg For cutting Focus Dg perimeter tiles * Connect Inspection hatch C3 Opal-white acrylic glass with aluminium frame finished in white. For use in ygiene ceilings edge A and C. Will stand high pressure hosing up to 80 bar. 600x600 mm modular. Corrosivity category C3. Connect Inspection hatch C3 Opal-white acrylic glass with aluminium frame finished in white. For use in ygiene ceilings edge A and C. Will stand high pressure hosing up to 80 bar. 1200x600 mm modular. Corrosivity category C Opal * Opal * Connect Inspection panel Coated galvanized steel. atch with hinges opened/locked with screwdriver. Can be wet wiped. For use in ceilings with edge A and E, and Focus and Master Ds. Size 600x600 mm modular. Opening 565x565 mm Connect white *
2 Connect Installation Gloves White cotton gloves. For avoiding dirt and fingerprints on absorbers during installation. White * Connect Laser angle Tool for installing the grid perpendicular * Connect Panel lock Dp Plastic item for locking Dp tiles White 100 * Connect Protection cage C3 Protection cage made of coated steel wire mesh. Supplied together with four painted brackets which secures the panel in the cage. For products in corrosive environments. Corrosivity category C3 according to ISO White 1 * Connect Space bar connector Galvanized steel. Adjustable yoke to connect cut space bar * Connect Space bar winch Galvanized steel locking pin. For fixing Connect Space bar to Connect T24 Main runner D. Connect Split pin Locking pin for Connect Nonius hangers. Galvanized steel Galvanized 200 * * Connect Spring Clamp The third hand tool. For keeping the profiles in place during installation. Easy one hand operation to attach/detach * Connect Support Profile Fire supporting profile for Master Ds installation according to M226. Fixed to the tile with Connect Spiral anchor Connect Tape ygiene Advance L=25 m. W=60 mm. White. For sealing cut edges on Advance Perimeter tiles. Connect Tejp Industry AL 4054 L=50 m, W=48 mm. Aluminium tape for Industry AL White 1,50 * , Connect Ventilation grill A White polystyrene. Used to relieve pressure differences or alternatively for light fittings in edge A and E T24 installations. Cell size 15x15 mm. Open area 80 %. 600x600 mm modular. Connect Ventilation grill A White polystyrene. 1200x600 mm modular. Used to relieve pressure differences or alternatively for light fittings in edge A and E T24 installations. Cell size 15x15 mm. Open area 80 % White polystyrene White polystyrene * *
3 Connect Vertical 0,5 mm coated steel, supplied with transparent protecting film. L=2500 mm, B=1140 mm. For making perimenter trims and vertical level transitions White * Connect Wall Fixing C3 Stainless steel wire rod, pickled surface. For ygiene Advance and Foodtec wall panels. Connect Wall Spacer 5 Plastic(PP) wall space used to fix Master Rigid Dp perimeter tiles * White 50 * Edge Sealant Black Dark Diamond 1,00 * Edge Sealant Cloudy Day Cloudy Day 1, Edge Sealant Golden Field Golden Field 1, Edge Sealant ighland Fog ighland Fog 1, Edge Sealant Moonlight Sky Moonlight Sky 1, Edge Sealant Morning Drizzle Morning Drizzle 1, Edge Sealant Ocean Storm Ocean Storm 1, Edge Sealant Pale Pearl Pale Pearl 1, Edge Sealant Ruby Rock Ruby Rock 1, Edge Sealant Silent Steam Silent Steam 1,
4 Edge Sealant Silk Slate Silk Slate 1, Edge Sealant Silver Stone Silver Stone 1, Edge Sealant Summer Breeze Summer Breeze 1, Edge Sealant Sunset eat Sunset eat 1, Edge Sealant Volcanic Ash Vulcanic Ash 1, Edge Sealant White Water based paint suitable for white surface. Other NCScolours available on request. Complete with paint brush. For painting and sealing of edges of perimeter tiles cut on site. 1 litre White 1,00 * Connect Accessories - Connect Clips Product Connect Absorber distance D A spring clip used to position edge Lp products in the grid. Only for Connect Main runners D * Connect Baffle clip Coated steel clip for suspending ygiene Baffles. Design load: 50 N. Corrosivity category C Connect white 100 * Connect Bridging clip 5/20 Stainless spring steel. For integrations of lighting products, signs etc. To be used with Connect Bridging profile * Connect Bridging clip 7/10 Stainless spring steel. For integrations of lighting products, signs etc. To be used with Connect Bridging profile * Connect Clip 100/20 Stainless spring steel with plastic covers. For fixing Flexiform tiles to Main runner * Connect Clip 100/40 Stainless spring steel. For fixing 40 mm products *
5 Connect Demo clip 20 C4 Treated spring steel. For Ecophon 20 mm products. Demountable from below. For ygiene installations, ygiene Inspection hatch is recommended. 20 * Connect Edge clip Stainless spring steel. For supporting Dg-products 1200x1200 against the Connect T24 grid * Connect End Fixing Plate Galvanized steel. For Focus D XL in corridor installation * Connect Flexiform clip Rigid pvc-plastic. For fixing Flexiform tile to curved profile * Connect old down clip A Stainless spring steel. Used to hold down Ecophon Master Rigid A tiles but at the same time being fully demountable * Connect old down clip Ds Stainless spring steel. Used to hold down Ecophon Labotec Ds tiles but at the same time being fully demountable * Connect old down clip E Stainless spring steel. Used to hold down Ecophon Master Rigid E tiles but at the same time being fully demountable. 46, * Connect ygiene clip 20 Plastic. For Ecophon ygiene panels 20 mm. Demountable from above * Connect ygiene clip 40 C4 Treated spring steel hold down clip. For fixing ygiene 40 mm panels and Connect items in environments up to class C4. Demountable from above * Connect Light fitting clip Coated steel luminaire clip for Gedina A/E and Focus A/E with T15. Corrosivity category C3. Design load: 50 N Connect white 10 * Connect Light fitting clip Coated steel luminaire clip for Gedina and Advantage A/E and Focus A, Dg, Dp, Ds, E and Lp with T24. Corrosivity category C3. Design load: 50 N. Connect Light fitting clip Painted steel luminaire clip for Master Ds with T24 D. Corrosivity category C3. Design load: 50 N Connect white Connect white 10 * * Connect Perimeter tile clip For fixing perimeter tiles at the wall trim in a Ds system *
6 37 Product Connect Perimeter tile clip 40 For fixing perimeter tiles at the wall trim in a Master Ds system * Connect Stop clip Plastic. For positioning edge D & Ds tiles along the Connect Main runner * Connect Support clip Dg20 Galvanized steel. For Dg-perimeter tiles with the thickness 20 mm. Connect Support clip Dg25 Galvanized steel. For Dg perimeter tiles with the thickness 25 mm * * Connect Universal clip Plastic clip. For fixing products where supporting edge is between 5-20 mm thick * Connect Wall Spring Spacer Spring steel. For fixing perimeter tiles Connect Wall spring A spring clip used to position edge Lp perimeter tiles in the grid. 18, * Connect Accessories - Connect Connectors & Splines Product Connect Edge 500 Corner Zinc molded corner for Edge 500 profiles Connect white 02 textured 4 * Connect Edge Kit Ds/Dg To be used with Connect Edge Profile together with Focus Ds/Dg system. Kit Ds and Dg includes: 4 Joint fixing bracket, 1 socket screw wrench 2 mm, 12 guide pins, 24 screws RTK ST 3,5x9,5 (for fixing to extrusion), 1 Installation guide IG 210, 1 installation guide IG 211, 18 screws RTK 3,5x25 and 18 Connect Edge Distance Ds/Dg. Connect Edge Kit E To be used with Connect Edge Profile together with Focus E system. Kit E includes: 4 Joint fixing bracket, 1 socket screw wrench 2 mm, 12 guide pins, 24 screws RTK ST 3,5x9,5 (for fixing to extrusion), 1 installation guide IG 165, 18 screws RTK 3,5x19 and 18 Connect Edge Distance E. White 500 * * Connect External corner Galvanized and coated steel corner for Connect Shadow channel trim =44 mm Connect white 12 * Connect External corner Galvanized and coated steel corner for Connect Shadow channel trim =74 mm Connect white 12 *
7 Connect External corner Galvanized and coated steel corner for Connect Shadow channel trim =94 mm Connect white 12 * Connect F Spline AMO-Fiber. L=600 mm. For leveling off edge F products Black 50 * Connect F Spline AMO-Fiber. L=600 mm. For leveling off edge F products Black 20 * Connect Guiding pin Guiding pin to align Solo Baffles and keep the distance between each baffle at 6 mm a part White 100 * Connect ook Phosphated steel. To keep absorbers together, e.g. Focus Wing, Light coffer, Quadro * Connect L-coupling Galvanized steel. For 90 degree T-connections between T-profiles. Gives modular sizes if fixed to coupling holes (Module 600 mm). Connect Panel connector Moulded product for Master Matrix. Used together with Connect Panel cross bar and Connect T24 Main runner. Screws included Galvanized 50 * * Connect Profile connector For aligning Connect Baffle profile. Lacquered galvanized steel Connect white 50 * Connect Screen connector Plastic detail, connecting two Ecophon Akusto Screens Grey 2 * Connect Spline Plastic(PE). For leveling off joints in edge C installation. L=150 mm Black 100 * Connect Structure I-junction Injection-moulded ABS plastic extension part, used to extend Structure profiles ,2 Connect grey 03 2 * Connect Structure T-junction Injection-moulded ABS plastic tee junction, used to construct a three way meeting of Structure profiles Connect grey 03 2 * Connect Structure X-junction Injection-moulded ABS plastic cross junction, used to construct a four way meeting of Structure profiles Connect grey 03 2 * Connect Structure ending Injection-moulded ABS plastic part, used to close and finish endings on the Structure profiles ,2 Connect grey 03 8 * Connect T-Splines L=600 mm, 0,5 mm galvanized steel. For edge C products. 600 Galvanized
8 Connect Thinline corner Connect white 02 textured 4 * Connect Thinline corner Injection-moulded structure laquered zinc corner for Connect Thinline profiles Connect grey 04 textured 4 * Connect Thinline corner Injection-moulded structure laquered zinc corner for Connect Thinline profiles Connect grey 03 textured 4 * Connect Thinline splice Injection-moulded ABS plastic Splice used to extend Thinline profiles * Connect WP External Corner Injection-moulded plastic external corner for WP profiles Connect white 03 4 * Connect WP External Corner Injection-moulded plastic external corner for WP profiles Connect grey 02 4 * Connect WP External Corner Injection-moulded plastic external corner for WP profiles Connect black 4 * Connect WP profile splice Injection-moulded ABS plastic Splice used to extend WP profiles * Connect Wing Distance Plastic distance between panels for Focus Wing White * Connect Accessories - Connect Fixing devices Product Connect Absorber Glue Water based glue. Adhesive for installation of Focus/ Master/Super G edge B and SQ. Directions for use are enclosed. 5 litres ,00 * Connect Absorber Glue Water based glue. Adhesive for installation of Focus/ Master/Super G edge B and SQ. Directions for use are enclosed. 10 litres ,00 *
9 Connect Absorber anchor Moulded anchor for Solo. Used together with Connect Adjustable wire hanger or Connect Rigid hanger. Sold only together with Solo panels * Connect Absorber anchor One * Connect Absorber anchor bit Allen key bit 4mm for Connect Absorber anchor * Connect Absorber screw LWC Electrolyte galvanized steel. of key 6,35 mm. For fixing mm Absorbers with washer or in light weight concrete. L=125 mm Galvanized 500 * Connect Absorber screw LWC Electrolyte galvanized steel. of key 6,35 mm. For fixing 100 mm Absorbers with washer or in light weight concrete. L=150 mm Galvanized 400 * Connect Absorber screw metal Electrolyte galvanized steel. of key 6,35 mm. For fixing 50 mm Industry Modus with washer or in sheet metal 0,63-2x1 mm. L=70 mm Galvanized 500 * Connect Absorber screw metal Electrolyte galvanized steel. of key 6,35 mm. For fixing 100 mm Industry Modus with washer or in sheet metal 0,63-2x1 mm. L=120 mm Galvanized 500 * Connect Acoustic Washer Phosphated steel. Black Black 100 * Connect Anchor screw Chromium-plated hardened steel. ead with T20 slot. 40 mm bore depth. Diameter 4 mm. For concrete fixings. Design load 266 N * Connect Anchor screw C4 C4 treated hardened steel. ead with T20 slot. 40 mm bore depth. Diameter 4 mm. For concrete fixings. Design load 266 N * Connect Anchor screw LWC Protect C4 coating for demanding environments. Key TX30. For fixing mm Absorbers with Connect Washers in light weight concrete. Size: 8,0 x *
10 Connect Anchor screw with eye Chromium-plated hardened steel. 50 mm bore depth. Diameter 5 mm. For concrete fixings. Installation with Connect tool Design load 500 N. Connect Expansion nail Galvanized steel/plastic. Drill diameter 5 mm. Drill depth 40 mm. For fixing to the wall. Not to the ceiling * Galvanized 300 * Connect Expansion nail Galvanized steel/aluminium. Drill depth 20 mm. Drill diameter 5,5-6 mm. Design load: In concrete min K 25: 400 N * Connect Installation screw BR Galvanized steel. White head. P2 slot. L=9 mm. Reduced drill point. Serration under head for good fixing result White 2000 * Connect Installation screw C4 Self drilling screw for wall trims in C4 environment. For plasterboard and wood. When fixing in concrete, pre-drill wall trim, use pp-plug and drill Ø5.5, depth 25 mm. Size 4,2x33. Connect Installation screw MVL Phosphated steel (black) with hardened tip. P2 slot. L=16 mm. For installation of i.e. angle trims on plaster or wood. 33 4, * * Connect Installation screw MVL Phosphated steel (black) with hardened tip. P2 slot. L=16 mm. For installation of i.e. angle trims on plaster or wood * Connect Installation screw MVL Phosphated steel (black) with hardened tip. P2 slot. L=22 mm. For installation of i.e. angle trims on plaster or wood * Connect Installation screw MVL Phosphated steel (black) with hardened tip. P2 slot. L=22 mm. For installation of i.e. angle trims on plaster or wood * Connect Installation screw MVL Phosphated steel (black) with hardened tip. P2 slot. L=35 mm. For installation of i.e. angle trims on plaster or wood * Connect Installation screw MVL Phosphated steel (black) with hardened tip. P2 slot. L=35 mm. For installation of i.e. angle trims on plaster or wood * Connect Installation screw P Galvanized steel. ead with T20 slot. Diameter 4,8 mm, L=13 mm. Reduced drill point. For fixing in steel sheet metal, max 2x1 mm. Used in combination with Connect Fixing bracket for fixing Adjustable hangers. Design load: 233 N Connect Notched spatula Grey plastic, notched spatula used with Connect Absorber glue , * Grey 5 * Connect Screw AL 4050 L=70 mm. Galvanized screw for fixing of 50 mm Industry AL in concrete. Predrill with drill Ø5mm *
11 Connect Screw AL 4052 L=120 mm. Galvanized screw for fixing of 80 mm Industry AL in concrete. Predrill with drill Ø5mm * Connect Spiral anchor Connect Spiral anchor for use together with Solo or 40 mm tiles * Connect Tool for Anchorscrew Installation tool for Anchor screw with eye * Connect Washer Galvanized and coated steel washer. For absorber screw (head with Torx T25 slot) for fixing in light weight concrete and steel sheet metal Connect white 100 * Connect Washer Galvanized and coated steel washer for absorber screw (width of key 6,35 mm) for fixing in light weight concrete and steel sheet metal. Connect Washer Galvanized steel. For absorber screw (width of key 6,35 mm) for fixing in light weight concrete and sheet metal White 500 * Galvanized 500 * Connect Washer AL 4053 Galvanized washer diam. 40 mm with hole diam. 6,2 for Connect Screw AL for fixing Industry AL Galvanized 100 * Connect Accessories - Connect Suspension & Brackets Product Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 *
12 Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 50 * Connect Adj hanger w. eye tone treated spring steel. One eye and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 50 * Connect Adjust bracket Adjustable bracket for free hanging single panels or elements. Can be used where o.d.s is 156 mm to max 192 mm. By cutting lower part, an o.d.s of 121 mm can be achived Galvanized 24 * Connect Adjust direct bracket Galvanized steel. Construction height between mm for direct fixing of Connect T24 Main runner. Bit Torx T20 included. Design load 233 N Galvanized 50 * Connect Adjust direct bracket Galvanized steel. Construction height between mm for direct fixing of Connect T24 Main runner. Bit Torx T20 included. Design load 233 N Galvanized 50 * Connect Adjust direct bracket Galvanized steel. Construction height between mm for direct fixing of Connect T24 Main runner. Bit Torx T20 included. Design load 233 N Galvanized 50 * Connect Adjust direct bracket Galvanized steel. Construction height between mm for direct fixing of Connect T24 Main runner. Bit Torx T20 included. Design load 233 N Galvanized 50 * Connect Adjust direct bracket Galvanized steel. Construction height between mm for direct fixing of Connect T24 Main runner. Bit Torx T20 included. Design load 233 N Galvanized 50 *
13 Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 100 * Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 50 * Connect Adjustable hanger C1 tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C1. L= mm Galvanized 50 * Connect Adjustable hanger C3 Wire of 4,0 mm aluminium zinc coated steel, and spring clip of delta tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C3. L= mm Zinc 100 * Connect Adjustable hanger C3 Wire of 4,0 mm aluminium zinc coated steel, and spring clip of delta tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C3. L= mm Zinc 100 *
14 Connect Adjustable hanger C3 Wire of 4,0 mm aluminium zinc coated steel, and spring clip of delta tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C3. L= mm Zinc 100 * Connect Adjustable hanger C3 Wire of 4,0 mm aluminium zinc coated steel, and spring clip of delta tone treated spring steel. One rounded and one angled hook. Design load 233 N. Corrosivity category C3. L= mm Zinc 100 * Connect Adjustable hanger C4 Wire of 4,0 mm steel, and spring clip of spring steel, both treated with high corrosion resistant protective coating. One rounded and one twisted hook (bent outwards to avoid contact with the tiles). Design load 233 N. Fullfills demands according to corrosivity category C4 according to ISO L= mm. Connect Adjustable hook Wire lock featuring a hook for Connect Adjustable wire hanger * * Connect Adjustable wire hanger Connect adjustable hanger kit consisting of a wire and a wire lock featuring a hook. Wire length 2000 mm * Connect Adjustable wire hanger Connect adjustable hanger kit consisting of a wire and a wire lock featuring a hook. Wire length 2000 mm * Connect Adjustable wire hanger Connect adjustable hanger kit consisting of a wire and a wire lock featuring a hook. Wire length 5000 mm * Connect Adjustable wire kit Adjustable wire kit containing 1.5 mm galvanized wire, adjustable wire hook with lock and a chrome ceiling holder. For C1 environments. 43, * Connect Adjustable wire kit Adjustable wire kit containing 1.5 mm galvanized wire, adjustable wire hook with lock and a chrome ceiling holder. For C1 environments. 43, * Connect Ambit fixing Galvanized steel. For fixing Industry Ambit and support for Akusto Wall C in Thinline installations *
15 Connect Angle Bracket Galvanized steel with punch for 3,2 mm pop rivet. For fixing Flexiform profile/main runner * Connect Baffle anchor Moulded anchor for cut Solo Baffle/anchor, stop clips included * Connect C-profile Plus Galvanized steel. For Super G Plus installation. L=3100 mm. Connect Direct Bracket igh quality galvanized steel. =44 mm. Construction height 50 mm when installed with Connect T24 Main runner. Design load 233 N Galvanized 24,80 8 * Galvanized 100 * Connect Direct Bracket igh quality galvanized steel. =74 mm. Construction height 80 mm when installed with Connect T24 Main runner. Design load 233 N Galvanized 100 * Connect Direct Bracket igh quality galvanized steel. =94 mm. Construction height 100 mm when installed with Connect T24 Main runner. Design load 233 N Galvanized 100 * Connect Direct Fixing Plate Galvanized steel. For wall absorbers with wood mouldings * Connect Direct Fixing Plate Galvanized steel. For direct fixing of edge C products. Connect Direct Fixing Plate Galvanized steel. For fixing Master F to concrete. =12 mm * * Connect Direct fixing plate Galvanized steel. For fixing Focus F to concrete. =6 mm * Connect Fixing Bracket Galvanized steel. For direct fixing of Connect Z-profile and Connect WP profile * Connect Fixing plate For fixing Adjustable hanger and tube hanger C1-C4. Corrosivity category C4 according to EN * Connect Foodtec baffle hook Anchor for cut Solo Baffle/hook or Foodtec Baffle. Corrosion class C *
16 Connect Frieze bracket Galvanised steel. For connection to the wall without wall trim * Connect anger clip Stainless steel. Click on fixing for Connect T24 Main runner. To be used with Connect Adjustable hanger with rounded angle hook hanging vertical. Design load 233 N. Not recommended in swimming hall environment. Connect Level change Ds Galvanzied steel fixing for Ds level change. The kit contains 10 pcs Connect Level clip Ds and 10 pcs Connect Distance Ds. Used together with Focus Ds panels. Connect Nonius hanger lower Galvanized steel. =110 mm. For Super G Plus installation * Galvanized 10 * Galvanized 100 * Connect Nonius hanger upper Galvanized steel. L=240 mm with an adjustable part of 170 mm. Longer hangers (L= mm) on request Galvanized 100 * Connect One fixing Textile and aluminum fixing for Akusto One. Overall depth of system, including the Akusto One panel, 40 mm Red 2 * Connect One fixing Textile and aluminum fixing for Akusto One. Overall depth of system, including the Akusto One panel, 40 mm Pink 2 * Connect One fixing Textile and aluminum fixing for Akusto One SQ. Overall depth of system, including the Akusto One SQ panel, 40 mm Light Grey 2 * Connect One fixing Textile and aluminum fixing for Akusto One. Overall depth of system, including the Akusto One panel, 40 mm Green 2 * Connect One hook fixing *
17 L L L Product Connect One-point fixing Suspension detail made of aluminium. Used togehter with Connect Absorber anchor and Connect Adjustable wire hanger. Only for horizontal installation of Solo panels. Connect Panel fixing plate Panel fixing plate for Connect Adjust bracket. Installed on the back of a free hanging panel with 2 pcs of Connect Spiral anchor screw. Connect Spiral anchor hook Anchor for cut Solo Baffle/hook * Galvanized 24 * Connect Splice connector Plus Galvanized steel. For Super G Plus installation Galvanized 100 * Connect Spring clip Spring clip of phosphated spring steel for Adjustable hanger and Connect Suspension wire Corrosivity category C * Connect Suspension wire Diameter 4 mm, galvanized steel. L=3000 mm. For extension of Adjustable hanger * Connect Tube hanger 240 Aluminum tube. Adjustable rigid hanger. Used together with Connect Fixing plate. Pin included. L= mm * Connect Tube hanger 400 Aluminum tube. Adjustable rigid hanger. Used together with Connect Fixing plate. Pin included. L= mm * Connect Tube hanger 720 Aluminum tube. Adjustable rigid hanger. Used together with Connect Fixing plate. Pin included. L= mm * Connect Wall Bracket Galvanized steel. For fixing Connect T-profiles against the wall * Connect Wall Bracket Galvanized steel. For fixing Connect Space bar against the wall. Connect Wall Fixing Bracket igh quality galvanized steel. For wall fixing of Main runners. Construction height 104 mm when installed with Connect T24 Main runner. Design load 233 N * Galvanized 50 * Connect Wallbracket Plus Galvanized steel. For Super G Plus installation Galvanized 100 *
18 Connect X-connector Plus Galvanized steel. For connection between C-profiles in Super G Plus installation Galvanized 100 * Connect Accessories - Connect Wood mouldings Product Connect Wood trim Foil covered MDF board. L=2500 mm. Perimeter trim for Focus B and F. Connect Wood trim Foil covered MDF board. L=3000 mm. Perimeter trim for Master B,F and Super G B White 10,00 4 * White 12,00 4 *
Connect by Ecophon engineered for your convenience
Connect by Ecophon engineered for your convenience Connect Accessories - Connect Accessories others Product Connect Covering cup White plastic cup to cover fixings in the soffit, used together with Connect
More informationROCKFON System Olympia Plus
Installation guide ROCKFON System Olympia Plus Sports Ceiling Impact Class 1A Suspension system Exposed impact-resistant 50mm grid system 11 6 9 8 12 7 11 4 1 5 3B 3A 10 2 1. 50 mm main runner CMC 3050
More informationNONIUS ceiling SUSPENSION SYSTEM
NONIUS ceiling SUSPENSION SYSTEM QUICK HANGER SYSTEM CEILING AND WALL FIXINGS INSPECTION HATCHES ACCESSORIES PRODUct catalogue 2013 INDEX 6...NONIUS ceiling SUSPENSION SYSTEM 22... QUICK HANGER SYSTEM
More informationRockfon System OlympiaPlus A Impact 1A
System description Rockfon System OlympiaPlus A Impact 1A Ceiling systems for special applications Impact resistance SYSTE GRP WAR YEARS IT LIM ED E very single tile is demountable for easy and fast access
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationK9 KIT INSTALLATION INSTRUCTIONS CROWN VIC KK-K9-F7-K
K9 KIT INSTALLATION INSTRUCTIONS 1998-2011 CROWN VIC KK-K9-F7-K TOOLS REQUIRED: Power Drill (Cordless preferable) Drill Bit Set Standard Wrench and Socket Set Metric Socket Set Screwdriver Set Torx Bit
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationCI/SfB. October RockLink Integra. Installation system
CI/SfB (35) Xh2 October 2008 RockLink Integra Installation system RockLink Integra 1 6 Rockfon tiles with the E15 straight edge detail are suitable for installation using this system. 6 2 6 The following
More informationmetalworks Plank Assembly and Installation Instructions 2.1 Read this entire document before proceeding with installation.
metalworks Plank Assembly and Installation Instructions 1. GENERAL is a ceiling system made up of standard sized hook-on planks fabricated from galvanized steel and powder coated to provide a damage and
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationOlympia Plus Sports Ceiling Impact Class 1A
Olympia Plus Sports Ceiling Impact Class 1A Suspension system Exposed impact-resistant 50mm grid system 11 6 9 8 12 7 11 4 1 5 3B 3A 10 2 1. 50 mm main runner CMC 3050 2. 50 mm cross tee CMC 3054 3. Hold-down
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationK9 KIT INSTALLATION INSTRUCTIONS CROWN VIC with Fire Suppression System Model KK-K9-F7-K-FS
K9 KIT INSTALLATION INSTRUCTIONS 2005-2011 CROWN VIC with Fire Suppression System Model KK-K9-F7-K-FS TOOLS REQUIRED: Power Drill (Cordless preferable) Drill Bit Set Standard Wrench and Socket Set Metric
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationEMAC 001 ACCESS PANEL
EMAC 001 ACCESS PANEL 900 x 600* 1200 x 600* Picture covers uneven edges Beaded can be taped and jointed for skimming Ensure the structural opening (panel size +10mm) is lined with timber or steel section.
More informationWall mounting with holding profile
B Main profile C Edge profile D Wall spacer E Heradesign acoustic panel Edge distance max. 250 mm c Centre distance of basic section (see table) B max. 600 mm or 625 mm a Centre distance of spacer (see
More informationCEILING SYSTEMS. Between us, ideas become reality. Installing. Suspended Ceilings. International Version
CEILING SYSTEMS Between us, ideas become reality Installing Suspended Ceilings International Version 1 Installing Armstrong Suspended Ceilings An Armstrong suspended mineral fiber ceiling is functional,
More informationSimplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
More informationInstallation Guide. Rockfon Eclipse
Installation Guide Rockfon Eclipse GENERAL INFORMATION System description: Rockfon Eclipse is a frameless acoustic island available in square, rectangular and other geometric shapes. The square and rectangular
More informationB A T H R O O M G L A S S
mistley B A T H R O O M G L A S S vaug16 Page 2 Thank you for purchasing this Trinity shower screen. Please study these instructions carefully before assembly and installation and check all supplied parts
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationINFUSIONS and METALWORKS Wings Accent and Acoustical Clouds
INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds Assembly and Installation Instructions 1. GENERAL 1.1 Product Description Wings is a decorative ceiling element consisting of a 10 foot long
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationClassic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment
Ceiling Systems SERPENTINA Classic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment Installation Instructions The 3-Dimensional Ceiling System consists
More informationSLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page
More informationOWAtecta. OWA metal ceilings. OWAtecta Metal ceilings
OWAtecta OWA metal ceilings OWAtecta Metal ceilings 3 OWAtecta Metal ceilings Contents Inhalt Perforations steel... 4 Perforations aluminium... Edges.... 6 Technical information... 7 Systems System OWAtecta
More informationSLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09
More informationBolt-On/Rugged Fender Flares Toyota Tundra (14-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY Extrusion 28.0 ft Short Screw 18 Nuts 42 Alcohol Wipe 4 Long
More informationM-PD93X INSTRUCTION MANUAL M
M-PD93X INSTRUCTION MANUAL 06.10 M003 Dimensions from wall to center of threshold MODEL FRONT (DIM A) SIDE (DIM B) MIN MAX MIN MAX 4836 45 7/8 46 3/8 33 7/8 34 3/8 6036 57 7/8 58 3/8 33 7/8 34 3/8 4832
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationMETALWORKS Wings Accent and Acoustical Clouds Installation Instructions
CEILING SYSTEMS Between us, ideas become reality METALWORKS Wings Accent and Acoustical Clouds Installation Instructions 1. GENERAL 1.1. Product Description MetalWorks Wings is a decorative ceiling element
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More informationAXIOM KE CANOPY Installation Guide
CI/SfB (35) Xy AXIOM KE CANOPY Installation Guide April 2016 1 PREPARATION AXIOM KE CANOPY COMPONENTS Item Nr. Description CS 57420 G AXIOM KE Canopy profile C 3000 H C Channel 19 x 38mm A WDN 21 H T bar
More informationInstallation Instructions
Installation Instructions Alcove Enclosure Before Installation please check that your shower enclosure system is undamaged Please read these instructions carefully March 2015 TOOLS REQUIRED Electric or
More informationInstallation Guide. Rockfon Eclipse
Installation Guide Rockfon Eclipse GENERAL INFORMATION System description: Rockfon Eclipse is a frameless acoustic island made from a 40 mm bevel edged stone wool panel. The visible side is covered with
More informationINSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA
INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket
More informationGrand Slam 380 and Grand Slam 380XL Installation Instructions
Grand Slam 380 and Grand Slam 380XL Installation Instructions Patent #7,114,283 GS-380 GS-380XL Taco Metals, Inc., info@tacomarine.com TacoMarine.com Thank you for purchasing a quality Taco Marine product.
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationT-GRID SYSTEM WIDE CLEANROOM CEILING GRID SYSTEM
T-GRID SYSTEM 1.1 2 WIDE CLEANROOM CEILING GRID SYSTEM Updated: 4-18-2012 UOVERVIEW The CleanPro T-Grid ystem is designed for carrying the load of standard filter modules for Class 10 to Class 100,000
More information2 A6310C2 600 x 1200 x 3t 6pc Nr hue Product code Dimensions Quantity
CALME Preliminary remark: beneath information accrues from sources which we consider reliable. We cannot be responsible for its correctness or exhaustion. See also our general terms and conditions. 1.
More informationSliding Door Hardware-Glass Bottom Rolling System
Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height:,500 mm (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Door width: 500 500 mm
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationINSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT
INSTALLATION INSTRUCTIONS - CEILING POWER TRAK, HANGER HOOKS AND RACKS I. CONTENTS CEILING POWER TRAK KIT QUANTITY DESCRIPTION 2 POWER TRAK, 5 FT LG 4 END CAPS, YELLOW 10 SCREWS, 1 5/8 LG 10 WASHERS, 5/8
More informationINSTALLATION MANUAL STORAGE
IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no
More informationHardware Fitting Accessories Accessories
Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap
More informationASS 70 FD folding/sliding door installation guide
ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationInde-Pendants Family. 32L Ring Plaster Trim, Grid and Drywall Ceiling Types. Document No Installation instructions for 32L-Rxx-P
Inde-Pendants Family 32L Ring Plaster Trim, Grid and Drywall Ceiling Types Installation instructions for 32L-Rxx-P Document No. Supplied by Litecontrol 32L Inde-Pendants: Ring (Plaster Trim, Grid and Drywall
More informationInstalling flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
More informationGRID CEILING HOOKS FISH CLIP. REGULAR HOOK 2mm galvanized wire with 16mm opening. Ideal for ONE-UP applications. Galvanized wire hook.
GRID EILING HOOKS SREW-ON EILING TRAK Ideal for plasterboard ceilings or other non-grid areas. Shift sign placement left or right with ease, install parallel tracks for a 3D layered effect, eg in display
More informationInstallation Instructions for Vista Air Vertically Folding Walls
Installation Instructions for Vista Air Vertically Folding Walls Use these instructions in conjunction with your shop drawings to see the specifics that are particular to the model you are installing.
More informationUNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationInstallation Instructions
Installation Instructions Angle orner & Round Enclosures efore Installation please check that your shower enclosure system is undamaged Please read these instructions carefully Oct 2015 TOOLS REQUIRE Electric
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More informationINSTALLATION INSTRUCTIONS DANUBE ACRYLIC NEO ANGLE
INSTALLATION INSTRUCTIONS DANUBE ACRYLIC NEO ANGLE March 2013 DOOR 2 Page 1 of 5 INSTALLATION INSTRUCTIONS NEO ANGLE 6MM FRAMELESS AND 4MM FRAMED SHOWER DOOR DANUBE, DELTA, SIGNATURE, OCEANIA, CASCADE
More informationPlug sockets. page 15. Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14
CONTENTS Introduction New colours version: PP-A-14-ENG PERFOPLUG BASE Plug sockets. page 1 Assembly instructions. page 2-3 Assembly material. page 4-6 Insertable parts. page 7-14 PERFOPLUG PREMIUM Plug
More informationLinvisibile Concealed Sliding door Manual version
Concealed Sliding door manual version - technical data installation and assembly instruction - page 1 of 16 Linvisibile Concealed Sliding door Manual version technical data installation and assembly instruction
More informationBioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
More informationALLORA SWING PANEL INSTALLATION INSTRUCTIONS
ALLORA SWING PANEL INSTALLATION INSTRUCTIONS Before Installation Please check that your Allora Swing Panel is undamaged SEQUENCE OF INSTALLATION These instructions are also available from the Athena website:
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationEaton Data Center Solutions. Installation Guide Cage System Assembly Publication No. MN159005ZU
Eaton Data Center Solutions Installation Guide Cage System Assembly Publication No. MN159005ZU Copyright 2013 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationLightline Movable Wall Installation Manual. Preliminary Draft #
Installation Manual Preliminary Draft #3 9-0-3 Table of Contents Parts Identification Tools Aluminum Extrusions Layout Typical Panel Installation Ceiling Channel Ceiling Corner Bracket Hard Floor Securing
More informationHardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
More informationRoof fastener. Perfectly thought out for every roof
Roof fastener Perfectly thought out for every roof 1 Welcome to the world of clever solutions Solutions for every roof In our production areas we produce all needed components for the sub construction
More informationCINTRALUX ALU BARREL VAULT EP 10/10
CINTRALUX ALU BARREL VAULT EP 10/10 Installation instructions EN 14963 Artn 43984 E_MH_Cintralux EP 10/10 mm AG.PLASTICS QUALITY 1 Installation instructions Cintralux aluminium barrel vault: Cintralux
More informationMETALWORKS TARTAN PANELS General Installation Instructions
CEILING SYSTEMS METALWORKS TARTAN PANELS General Installation Instructions 1. GENERAL 1.1. Product Description MetalWorks Tartan system is a combination of metal ceiling panels available in a range of
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More informationVersion 2016_1.1 VICTORIAN ASSEMBLY INSTRUCTIONS. Victorian Vi-23, 34, 36
Version 2016_1.1 VICTORIAN ASSEMBLY INSTRUCTIONS Victorian Vi-23, 34, 36 PRODUCT INFORMATION Dear customer, Thank you for buying a high-quality aluminium greenhouse. REMARKS The drawings in these instructions
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationL INVISIBILE CONCEALED SLIDING SYSTEM
L INVISIBILE CONCEALED SLIDING SYSTEM Motorized version Technical data, installation and assembly instructions Concealed sliding door Motorized version - Technical data, installation and assembly instructions
More informationInde-Pendants Family. 32L Surface Mount Cylinder Plaster Trim, Grid and Drywall Ceiling Types. Document No
Inde-Pendants Family 32L Surface Mount Cylinder Plaster Trim, Grid and Drywall Ceiling Types Installation instructions for 32L-C-S-D Document No. Supplied by Litecontrol 32L Inde-Pendants: Cylinder (Surface
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B PFD30 SG Fire Door Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors SUGGESTED TOOLS DRILL G-CLAMP TAPE MEASURE (Image for reference only) HACKSAW POCKET
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationP SERIES. and MASON CORPORATION
P SERIES CATAL ALOG Carpor ports and Patio Cover ers Corporate Office 123 Oxmoor Road West Birmingham, AL 35209 P.O. Box 59226 Birmingham, AL 35259-9226 Telephone: 1/800/868-4100 Fax: (205) 945-4304 Mason-Columbia
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationInstallation Guide Acoustic Wall Panel
Installation Guide Acoustic Wall Panel Contents Preface 2 Adhesive Method 3 Fast Mount Method 4 Adhesive Method 5 Direct Fix Method 6 Magnet Method 7 Preface Wall Preparation Before beginning the installation
More informationIF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST
Set A Set B PFD60 Fire Door Kit FITTING INSTRUCTIONS IF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST SUGGESTED
More informationRESolution V2 Manual
RESolution V2 Manual Note for the German Manual: Yellow Bottle thick CA Pink Bottle Med CA Blue tube 5 minute Epoxy Green tube 90 Minute Epoxy Construction of the Fuselage Step 1: Cover the plan with a
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationInstallation Instructions HR910 Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation. 2. Install in accordance with manufacturer s installation instructions. Failure
More informationList of Contents. Trunking systems. Selection of surface finish. Equipotential bonding. Cable ladders. Cable trays/ luminaire rails.
List of Contents Trunking systems Ductel Twist Trunking system for electricity, telecoms and data solutions. The trunking is made of aluminium and is available with 45 mm and 80 mm openings. Plastic trunking
More informationPORTA-FAB Cleanroom Wall Systems
PORTA-FAB Cleanroom Wall Systems FABLINE BATTEN 2000 INSTALLATION INSTRUCTIONS IMPORTANT Porta-Fab Advises A Thorough Reading of These Instructions Before Beginning Installation. INTRODUCTION Porta-Fab
More informationLinvisibile Concealed Sliding door Motorized version
Concealed Sliding door motorized version - technical data installation and assembly instruction - page 1 of 16 Linvisibile Concealed Sliding door Motorized version technical data installation and assembly
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationDisassembly Instructions for Recycling June 10, 2010
Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly
More informationInstallation Instructions 3520WW/3520WWB Handrail
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationFortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System
More informationTrim (Aluminum Substrate)
CEILING SYSTEMS Between us, ideas become reality Trim (Aluminum Substrate) GENERAL Description WoodWorks Trim (aluminum substrate) is a unique system designed for use with Tegular, Vector, Linear and Channeled
More informationOn-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
More information