NEURO SWING-CLASSIC NEURO VARIO NEURO VARIO-CLASSIC NEURO CLASSIC A10.1. Further Sources of Information. Product Information
|
|
|
- Alfred Norris
- 6 years ago
- Views:
Transcription
1 NEURO SWING-CLASSIC NEURO VARIO Joint to control and support the motion The range of motion in plantar flexion and dorsiflexion can be adjusted by filing the system stirrups. Alternative application due to a special system stirrup: The can be used together with the Borggreve stirrup for producing ortho-prostheses using the Borggreve rotationplasty. A10.1 Product Information Further Sources of Information Source of information Article number Link Manual PB1000-SF Production techniques - System Ankle Joint Function without foot lifter with foot lifter
2 Service/Support Hotline NEURO VARIO NEURO SWING-CLASSIC A10.2
![0 Joint Weights [g] Joint head thickness 7.8 9.1 10.3 11.5 12.](/docs-images/78/77342589/images/3-2.jpg "0 System width Material Unit 10mm 12mm 14mm 16mm 20mm Steel Piece 15 28 43 60 85 Titanium")
3 System Ankle Joints REINFORCED 10mm 12mm 14mm 16mm 20mm NEURO SWING-CLASSIC NEURO VARIO Joint Dimensions [mm] A10.3 System width a Dimension Description 10mm 12mm 14mm 16mm 20mm b Joint head width c Joint height Joint Weights [g] Joint head thickness System width Material Unit 10mm 12mm 14mm 16mm 20mm Steel Piece Titanium Piece The system ankle joint is delivered with the following articles: AGOMET F330, 5g Orthosis joint grease, 3g Assembly/lamination dummy System stirrups and system side bars/anchors have to be ordered separately. You will find system stirrups on catalogue page A10.8. You will find system side bars/anchors on catalogue page F1ff.
4 System Ankle Joints REINFORCED Straight (fig. 1) Straight Fig. 1 Bent inwards Fig. 2 Bent outwards Fig. 3 Material Leg Unit 10mm 12mm 14mm 16mm 20mm Steel Left or right Piece SF1200-ST/LR SF1201-ST/LR SF1202-ST/LR SF1203-ST/LR SF1205-ST/LR Titanium Left or right Piece - SF1201-TI/LR SF1202-TI/LR SF1203-TI/LR SF1205-TI/LR Bent Inwards (fig. 2) Material Leg Unit 10mm 12mm 14mm 16mm 20mm Steel Left or right Piece SF1220-ST/LR SF1221-ST/LR SF1222-ST/LR SF1223-ST/LR SF1225-ST/LR Titanium Left or right Piece - SF1221-TI/LR SF1222-TI/LR SF1223-TI/LR SF1225-TI/LR Bent Outwards (fig. 3) Material Leg Unit 10mm 12mm 14mm 16mm 20mm Steel Left or right Piece SF1240-ST/LR SF1241-ST/LR SF1242-ST/LR SF1243-ST/LR SF1245-ST/LR Titanium Left or right Piece - SF1241-TI/LR SF1242-TI/LR SF1243-TI/LR SF1245-TI/LR A10.4 NEURO VARIO NEURO SWING-CLASSIC
5 Spare Parts REINFORCED Spare Parts NEURO SWING-CLASSIC NEURO VARIO Spare Parts * Sliding Washers A Item 10mm 12mm 14mm 16mm 20mm Description 1 SB6039-L0480 SB7049-L0540 SB8559-L0580 SB9669-L0710 SB1069-L0760 Bearing nuts 2 SF0310-ST SF0311-ST SF0312-ST SF0313-ST SF0315-ST Upper part, straight, steel 2 - SF0311-TI SF0312-TI SF0313-TI SF0315-TI Upper part, straight, titanium 2 SF0330-ST SF0331-ST SF0332-ST SF0333-ST SF0335-ST Upper part, bent inwards, steel 2 - SF0331-TI SF0332-TI SF0333-TI SF0335-TI Upper part, bent inwards, titanium 2 SF0330-8/ST SF0331-8/ST SF0332-8/ST SF0333-8/ST SF0335-8/ST Upper part, bent outwards, steel 2 - SF0331-8/TI SF0332-8/TI SF0333-8/TI SF0335-8/TI Upper part, bent outwards, titanium 3 GS1206-* GS1407-* GS2009-* GS2210-* GS2611-* Sliding washer* 4 SF0160-AL SF0161-AL SF0162-AL SF0163-AL SF0165-AL Cover plate 5 SC1403-L08 SC1404-L08 SC1405-L10 SC1405-L11 SC1405-L11 Countersunk flat head screw, hexalobular socket 6 SC1403-L08 SC1404-L08 SC1405-L10 SC1405-L11 SC1406-L11 Countersunk flat head screw, hexalobular socket (axle screw) 10mm 12mm 14mm 16mm 20mm Ø = 12mm Ø = 14mm Ø = 20mm Ø = 22mm Ø = 26mm GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS GS The last three digits of the article number stand for the thickness of the sliding washer e.g. GS The thickness of this sliding washer is 0.40mm. In total, the sliding washers are available in five different thicknesses. The thickness of a sliding washer is indicated by the markings. For example, a sliding washer with two grooves is 0.40mm thick, whereas a sliding washer with one notch is 0.55mm thick. 0.40mm 0.45mm 0.50mm 0.55mm 0.60mm You will find system side bars and system anchors on catalogue page F1ff. You will find system stirrups on catalogue page A10.8.
6 Accessory Parts REINFORCED Accessory Parts Repair Bushing 7 Accessory Parts Item 10mm 12mm 14mm 16mm 20mm Description 7 BP0706-L020* BR0807-L020* BR1009-L025* BR1110-L030* BR1211-L030* Repair bushing* * You will find special reaming tools on catalogue page G11. A10.6 NEURO VARIO NEURO SWING-CLASSIC
7 Assembly/Lamination Dummies REINFORCED Assembly/Lamination Dummies 1 NEURO SWING-CLASSIC NEURO VARIO 1a Assembly/Lamination Dummies Item 10mm 12mm 14mm 16mm 20mm Description Unit 1 SF0910-LR SF0911-LR SF0912-LR SF0913-LR SF0915-LR Assembly/lamination dummy (1 dummy with screw) Piece 1a SC1403-L08 SC1404-L10 SC1405-L12 SC1405-L12 SC1405-L12 Countersunk flat head screw, hexalobular socket Piece Assembly/lamination dummies are included in the scope of delivery of the system joints. You will find an overview of our tools on catalogue page G1ff. A10.7
![riveted to the foot piece Length** [mm] 105 113 125 145 165 Weight [g] 31 40 67 106 134 Lamination/prepreg stirrup Article number Piece FB1170-ST/1 FB1171-ST/1 FB1182-ST/1 FB1193-ST/1](/docs-images/78/77342589/images/8-3.jpg "FB1195-ST/1 Is embedded into the foot piece Length** [mm] 31 40 51 59 70 when laminating/embedded into prepreg materials Weight [g] 10 16 32 52 68 Thermoformage stirrup Article number")
![inserted in common shoe Weight [g] - - 57 91 104 caliper plates Insertion width [mm] - - 19 22 22 Borggreve stirrup*** Article number Piece - FB9071-ST/3 FB9082-ST/4 FB9093-ST/4](/docs-images/78/77342589/images/8-5.jpg "FB9095-ST/5 Is used to produce a Borggreve Length** [mm] - 113 125 145 165 rotationplasty Weight [g] - 42 71 112 143 ** from the middle of the bore hole, *** for treating patients with")
8 System Stirrups REINFORCED System Stirrups Rivet stirrup Lamination/prepreg stirrup Thermoformage stirrup General Measures of System Stirrups System width Measure [mm] 10mm 12mm 14mm 16mm 20mm Thickness Neck width * 26.6* 30.8* Bore hole diameter * Exception: The neck width of the shoe caliper plate stirrup is equivalent to its insertion width. The system stirrup is marked with lines in the head area which serve as orientation for precisely filing the stirrup to the desired plantar and dorsiflexion stop. The system stirrup is marked with lines in the neck area in order to read the joint angle. Article number and measures for system width Description Unit 10mm 12mm 14mm 16mm 20mm Rivet stirrup Article number Piece FB1070-ST/3 FB1071-ST/3 FB1082-ST/4 FB1093-ST/4 FB1095-ST/5 Is riveted to the foot piece Length** [mm] Weight [g] Lamination/prepreg stirrup Article number Piece FB1170-ST/1 FB1171-ST/1 FB1182-ST/1 FB1193-ST/1 FB1195-ST/1 Is embedded into the foot piece Length** [mm] when laminating/embedded into prepreg materials Weight [g] Thermoformage stirrup Article number Piece FB1270-ST/2 FB1271-ST/2 FB1282-ST/3 FB1293-ST/3 FB1295-ST/3 Is embedded into thermoformable plastics; can also be embedded when laminating Shoe caliper plate stirrup Borggreve stirrup*** Length** [mm] Weight [g] Shoe caliper plate stirrup Article number Piece - - FB1542-ST/4 FB1553-ST/5 FB1555-ST/6 Length** [mm] Is inserted in common shoe Weight [g] caliper plates Insertion width [mm] Borggreve stirrup*** Article number Piece - FB9071-ST/3 FB9082-ST/4 FB9093-ST/4 FB9095-ST/5 Is used to produce a Borggreve Length** [mm] rotationplasty Weight [g] ** from the middle of the bore hole, *** for treating patients with Borggreve rotationplasty (system stirrup geometry designed in collaboration with the Department of Orthopaedics of the Heidelberg University Literature: Janßen E., Design Criteria for Prosthetic Management of Rotation-Arthroplasty, Orthopädie-Technik 11/2002) A10.8 NEURO VARIO NEURO SWING-CLASSIC
Visit our online tutorials at NEURO LOCK NEURO FLEX MAX NEURO LOCK MAX G10.1. Further Sources of Information. Product Information
Visit our online tutorials at www.fior-gentz.com. NEURO FLEX MAX MAX Product Information Basic function at delivery status: locked joint which provides motion control; system knee joint preassembled in
FIOR & GENTZ Tools. Tools System Side Bars and System Anchors. Materials. Catalogue Pages of the Tools
Tools System Side Bars and System Anchors FIOR & GENTZ Tools Catalogue Pages of the Tools Paragraph making the negative cast positioning the pivot points tools for the parallel alignment of the system
Systemknöchelgelenk System Ankle Joint
Systemknöchelgelenk System Ankle Joint DE GB Druckdatum: 2018-05 Der Inhalt dieser Produktbeilage wird regelmäßig aktualisiert und ist beim Einsatz des Produktes unbedingt zu beachten. Sie finden diese
ortho production Product Information Artikon Orthotic Joint System NEW Joints with locking mechanism
ortho production Product Information Artikon Orthotic Joint System NEW Joints with locking mechanism System-ankle joints without spring...7 8 Stirrup for system-ankle joints without spring...9 System-ankle
AMETAL SHAPER is indispensable for certain METAL SHAPER FOR YOUR SHOP. By S. S. Miner
METAL SHAPER FOR YOUR SHOP By S. S. Miner AMETAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
Table and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
DICTATOR RTS Tube Door Closer
Tube Door Closer RTS v long DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is built into the door and therefore is as good as invisible. The joint can only
Repair manual. Fifth-wheel coupling JSK 38/50
Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/212 1 Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety requirements and must
Fifth-wheel coupling JSK 38/50
Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/25 1 LT SK38C-3 English RevA Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety
Permanent fasteners: Riveted joints Welded joints Detachable joints: Threaded fasteners screws, bolts and nuts, studs. Cotter joints Knuckle joints
Instructional Objectives At the end of this lesson, the students should have the knowledge of Fasteners and their types: permanent and detachable fasteners. Different types of pin joints. Different types
Locker Pedestal Installation Instructions
Locker Pedestal Installation Instructions LK-PED-INST-0314r1 Parts List Single Pedestal Back to Back Pedestal Horizontal Support Tube TS-169 Post Flange TS-190 Post Cap Fasteners Provided: #8 x ¾ round
Preliminary. RP-ISO-hermetic EI 30 Fire protection structures Documentation Drawings/Instructions. Fire protection system RP-ISO-hermetic EI 30
Fire protection structures Documentation Drawings/Instructions Version 06/20 06/' Edisonstraße 4, D-5999 Bönen Tel: (+49)-(0)23 3-9 49-0 Fax: (+49)-(0)23 3-9 49-222 . General Information.. General terms
LifeGear G1 /HOME GYM ITEM NO.: 63100
LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
Sport-Thieme. Full-Size Goal. Assembly instructions. 7,32x2,44 m, Portable
Assembly instructions Sport-Thieme 7,32x2,44 m, Portable Art.-Nr.: 115 0793 257 7207 Full-Size Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone:
Pediatric. REGAL PROSTHESIS LTD. An ISO13485:2003 and ISO9001:2008 certified company Your reliable partner
9 Regal SACH foot (pediatric) 0-01-FTT & s 0-01-FTT Side Foot Length Heel Height 0-01-FTT-L-12 Left 12cm 10mm 60kg 0-01-FTT-R-12 Right 12cm 10mm 60kg 0-01-FTT-L-13 Left 13cm 10mm 60kg 0-01-FTT-R-13 Right
GRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
installation guide 1 GUIDE#: PWB-wwpontoon-pol-004
f250 pontoon WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks tower fits Pontoon boats with 96 to 102 inch wide beam widths. This measurement is taken from
Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
Installation Instructions
Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and
RIPPER PEDAL. Bearing / Axle Replacement. ( Disassembly )
RIPPER PEDAL Bearing / Axle Replacement ( Disassembly ) 1 1. Use good quality tools to avoid stripping screw sockets. 2. When servicing your pedals, work on one side at a time to prevent parts from mixing
3.2.3 Rear Door Window and Quarter Window Carrier Assembly
Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence. Tightening torque: 8 Nm Remaining bolts can be tightened in any sequence. Insert door window -3- through window recess without
Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
Free Standing Frame and Canopy
Patriot Docks Free Standing Frame and Canopy Required Tools: Cordless Drill, 3/8 drill bit, 17mm wrench, 18mm wrench, 6mm hex key (included), 8mm hex key (included) Helpful Tips: Assembling and installing
ABSL Model Background Stand
ABSL Model Background Stand Product Overview: The Ravelli ABSL model background stand is adjustable up to 13' tall by 15' wide. It is comprised of two tripod stands and five 3 cross bar sections and includes
HENDERSON. Securefold Bottom Rolling. Fitting Instructions For Bottom Rolling External Doors with Morticed hinges SYSTEM CAPACITY.
1 HERSON Securefold Bottom Rolling HEADBOARD LINTEL 9X4 Diagram 1 2,7 25 19 Fitting Instructions For Bottom Rolling External Doors with Morticed hinges 94SC SUPPORT CHANNEL 94P CHANNEL 14 2 SYSTEM CAPACITY
SC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
REPAIR INSTRUCTIONS: CABLE
The repair instructions describe replacing the Cable in the Easy Sun PARASOL Sunshade. These repair instructions are intended only for persons with experience of using the tools required. Please read the
Tool set for workshop use
72 iwis tools facilitate the breaking and riveting of roller chains pursuant to DIN 8187/8188 and the iwis norm and are useful for workshop use. The iwis tool product range also includes repairing tools
installation guide 1 GUIDE#: pwb-wwtowv1-pol-003
g300 WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
Tool set for workshop use
72 iwis tools facilitate the breaking and riveting of roller chains pursuant to DIN 8187/8188 and the iwis norm and are useful for workshop use. The iwis tool product range also includes repairing tools
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
Strata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1 with
In-Tube Motorized SCREEN-PRO. All Season Roll-Up Doors IN-JAMB MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST
In-Tube Motorized SCREEN-PRO All Season Roll-Up Doors IN-JAMB MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged,
TRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
the complete parts reference bricks
the complete parts reference Here s a detailed overview of all the pieces in your LEGO BOOST kit. You can also identify LEGO elements precisely by their LEGO ID, which is printed on the LEGO BOOST test
CRP700 Benchtop Basic CNC Machine Assembly Instructions. Updated 10/24/2014 SHEET 1 of 24
CRP700 Benchtop Basic CNC Machine Assembly Instructions Updated 0//0 SHEET of NOTE: This piece of extrusion is mounted wide side up Quick Tip: Lay extrusion on table as shown for easy assembly BASE ASSEMBLY:.
MANUAL PLASTIC STRAPPING TOOL MODEL P404
OPERATION MANUAL / SPARE PARTS LIST MANUAL PLASTIC STRAPPING TOOL MODEL P404 43.0404.02 43040402.en/MAS/ 12.05 INDEX PAGE 1 SAFETY INSTRUCTIONS 2 2 TECHNICAL DATA 3 3 OPERATION ELEMENTS 4 4 ADJUSTMENT
Adjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized
Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular
Workbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
BÖMA GmbH Maschinenbau und Automatisierungstechnik
Construction kit index Profiles Aluminium grid 40 1.01 Aluminium grid 50 1.02 KP-40/50 Plastic profile 1.03 AP-40/50 Aluminium cover profile 1.03 SBT-F Sliding doors guide prof. 1.04 FL-40/50 Wear strip
Ceiling Tile Installations Part 1. Sheetrock Installations Part 2. WolfVision Support 2055 Sugarloaf Circle, Suite 125 Duluth, GA 30097
Ceiling Tile Installations Part 1 Sheetrock Installations Part 2 WolfVision Support 2055 Sugarloaf Circle, Suite 125 Duluth, GA 30097 (877) 873-WOLF support@wolfvision.us 0 EYE Series Mounting Kit Part
This is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
Brio. Weatherfold 4s 150. Codes B WS S H PR. Sets note codes do not show finish, hinge sets not shown to same scale. Brio Weatherfold 4s
INSTBWSH1 REV G - MAR 2018 Brio Codes Weatherfold 4s 150 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com
PORTA~TRACE. GAGNE, INC. 41 Commercial Dr. Johnson City, New York Phone: Fax: ASSEMBLY INSTRUCTIONS
PORTA~TRACE GAGNE, INC. 41 Commercial Dr. Johnson City, New York 13790 Phone: 1-607-729-3366 Fax: 1-607-729-7644 ASSEMBLY INSTRUCTIONS PORTA~TRACE MODEL 2436T LIGHT TABLE PORTA~TRACE MODEL 3648T LIGHT
Front axle components, overview
j a t Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved, or
SELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
Strata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box:
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached
FITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
Kiosk Solution W1000. Installation and Assembly Instructions July 2015 Edition
Kiosk Solution W1000 Installation and Assembly Instructions July 2015 Edition All product names mentioned in this document are the trademarks, brands or registered trademarks of their respective owner.
aluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
Strata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
Bendarc. Assembly Instructions. <<< Remove 5" pivot. Move the roller to the correct hole for your radius. (use 3/4" wrench)
Bendarc Assembly Instructions
NEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
Aluminum Frame Type Instruction Manual
Aluminum Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
TS500 Assembly guide. Soldering. TS500 Assembly guide Main PCB 1. Diodes. Document revision 1.2 Last modification : 17/12/16
TS500 Assembly guide Safety warning The kits are main powered and use potentially lethal voltages. Under no circumstance should someone undertake the realisation of a kit unless he has full knowledge about
Stainless Steel Bench Stand
Installation Manual Stainless Steel Bench Stand Product(s): 29600 29601 51229 2016 by Fairbanks Scales, Inc. Revision 2 02/16 All rights reserved. Amendment Record STAINLESS STEEL BENCH STAND Document
May 14, Installation Manual
May 14, 2012 Installation Manual Contents MAG TRACKER Components...1 Mount Installation...7 Module Installation & Grounding...11 Maintenance...14 Warranty......14 Contact Information......14 May 14, 2012
CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
Reconditioning, aligning and mounting conrod in bearings
03-33 Reconditioning, aligning and mounting conrod in bearings Operation No. of operation texts and operation values or standard texts and flat rates 03-6 P03-582-5 2 Marking 6 Upper conrod bearing shell
TOOLS/ werkzeugtechnik
TOOLS werkzeugtechnik EDITORIAL In October 2006, ips-werkzeugtechnik took over the punching technology segment of DE-STA-CO Europe & Co. Werkzeugtechnik, which has earned us a new strategic position on
Weatherfold 4s 50 & 100 Brio Australia P: W: brio.com.au
Codes INSTBWS2 REV J - MAR 2017 Weatherfold 4s 50 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: brio.sales@allegion.com Brio UK P: +44 191 2291224 W: briouk.com E: brio.sales.uk@allegion.com
Shaft coupling: compensation of mismatching shaft ends (see page B 117) Flange bearing: linear drive bearing (see page B 96)
Overview Linear Drives At the employment of linear drives, the directly or via a toothed belt driven spindle is the most frequently applied variant. Motor flange bearing End flange bearing (two angular
Fabrication Manual. Fillauer II Standing Frame from Fillauer LLC
Fabrication Manual Fillauer II Standing Frame from Fillauer LLC Components List A B Back Support Elastic Chest Corset C Gluteal Panel D E F G H I Side Struts Knee Support Assembly Base Bracket Tip Prevention
Hydrajaws Safety Lifeline Tester
Hydrajaws Safety Lifeline Tester Operating Instructions HYDR AJAWS LIMITED Hydrajaws Safety Lifeline Tester 4 5 1 6 7 2 3 9 10 8 12 11 TECHNICAL SPECIFICATIONS Load Gauges Range available: Analogue: 0-25kN/lb/f
Piazzola Pergola Awning Manufacturing and installation guide
Piazzola Pergola Awning Manufacturing and installation guide Date Changes Page General information Maximum and minimum width Width Projection 150 to 349 cm 350 to 500 cm From 200 to 250 cm X From 251 to
Weatherfold 4s 50, 75 & 100
Codes Weatherfold 4s 50, 75 & 100 Brio Australia P: +61 2 87186718 W: brio.com.au E: sales@brio.com.au Brio RMD UK Ltd. P: +44 191 2291224 W: briouk.com E: sales@briouk.com INSTBWS1 REV D - NOV 2011 Brio
A Few Helpful Hints: A Word Of Caution:
Thank you for purchasing a Tsunami Wakeboard Tower by Extreme Marine Products, Inc. Please read and understand the instructions before proceeding to install. Inspect the package for missing or damaged
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
CRP700 Benchtop Basic CNC Machine Assembly Instructions. Updated 9/11/2014 SHEET 1 of 25
CRP700 Benchtop Basic CNC Machine Assembly Instructions Updated 9//0 SHEET of NOTE: This piece of extrusion is mounted wide side up Quick Tip: Lay extrusion on table as shown for easy assembly BASE ASSEMBLY:.
Closet Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
Tools Required: Phillips Screwdriver (#2) Adjustable Wrench Level Tape Measure Utility Knife Electric Drill Drill Bits for Anchors Ladder (4 foot) Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
INSTALLATION INSTRUCTIONS
Do not attempt to install this product on any vehicle other than the one it is designed for and listed above! Parts List 10 3/8 X 1 1/4 Hex Bolt 10 3/8 Lock Washer 4 3/8 Hex Nut 4 3/8 Flat Washer 2 3169)
Calf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
Tuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
The following instructions will guide you through the installation of your new vinyl railing.
Installation Guide St. James Vinyl T-Rail Tools Required Protective eye glasses 3/8 x 3 Concrete Anchors/Fasteners (for Tape measure concrete installations) Variable speed drill/screwdriver Philips Driver
I FOOT. ={Li..W---- r"-l, : I t- JJl --, : I: +- y1a'_' L 1~6~'1. ' +-+-'-f' <~,~ ::-,-~,~-~--f~:,~::-~%r
1hz" 3/Is"m.p.1. +--1---4+ ; ttf. I I, /~ 'r-- - - - - - - - - - - -1-11--- -- ---(~/-+--':.r--+~ ' +-+-'-f'
Barricade Trail Force HD Rear Bumper w/ Tire Carrier installation (07-16 Wrangler JK)
Barricade Trail Force HD Rear Bumper w/ Tire Carrier installation (07-16 Wrangler JK) Installation Time: 2-3 Hours Tools Required: Tire iron Ratcheting socket set (ratchet plus 13, 16, 19mm sockets) Open
ST90 SADDLE STITCHER TP10564 MISSING STITCH INSTALLATION MANUAL
ST90 SADDLE STITCHER TP10564 MISSING STITCH INSTALLATION MANUAL OVERVIEW MISSING STITCH INSTALLATION GUIDE The Missing Stitch option is an add-on to the ST-90 saddle stitcher. This unit mounts to the stitch
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
DRAFT TANZANIA STANDARD MEDC 10(5692) P3 - SPECIFICATION FOR HONEY EXTRACTOR, RADIAL TYPE
DRAFT TANZANIA STANDARD MEDC 10(5692) P3 - SPECIFICATION FOR HONEY EXTRACTOR, RADIAL TYPE TBS 2018 Draft Edition 1 0. FOREWORDS Honey extractors enable bee-keepers to extract the maximum quantity of honey
Wooden Frame Type Instruction Manual
Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
Heavy-Duty Bypass Track System
Heavy-Duty Bypass Track System Please Note: This track system must be installed with the screws going into a solid surface such as studs or a header. Due to the spacing of the holes on these Brackets,
RIVETING Rivet types Solid rivets Solid rivets are used less and less. They have been replaced in many cases by welding or bonding.
10.1 Rivet types 10.1.1 Solid rivets Solid rivets are used less and less. They have been replaced in many cases by welding or bonding. Because of the large countersinking angle of 140 flat countersunk
General Guidelines:
ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical residential shoreline application. Please
Tuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
Operating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
w w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
Section 3: Understanding Your Shop Drawings Reading Shop Drawing Abbreviations 60" O.A. stands for the overall dimension from the back wall to the front face of achieve your 60" overall you will set the
Tuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
Pull Handles Fixing Types. One-sided installation. Installation per pair. Wood, plastic profiles, 2-3 chamber aluminium profiles
Pull Handles Fixing Types One-sided installation Wood, plastic profiles, 2-3 chamber aluminium profiles Installation per pair Wood, plastic profiles, 2-3 chamber aluminium profiles 204 HEWI Hardware Technology
CURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START
ROOF ATTACHED VERANDAH ASSEMBLY INSTRUCTIONS Your supplementary guide to building an ATTACHED ROOF VERANDAH or PATIO This set of instructions should be used in conjunction with the Stratco instruction
STEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
METALPLAST-SOPRANA BRUINO TO VIA VOLVERA
1 4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com VERSION WITH OVERTURNED PART HINGES WELDABLE
ShorePort PWC Lift Instructions " x 138" Sandstone ShorePort " x 138" White ShorePort " x 138" Tan ShorePort
ShorePort PWC Lift Instructions 00-8" x 8" Sandstone ShorePort 009-8" x 8" White ShorePort 090-8" x 8" Tan ShorePort....... - PUT SAFETY FIRST To avoid the risk of personal injury or death, study and fully
F l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)