STARLITE NUT FAMILY. New high strength titanium nut family
|
|
- Rudolf Skinner
- 6 years ago
- Views:
Transcription
1 STARLITE NUT FAMILY New high strength titanium nut family
2 Designed for Composite, Titanium and Aluminum Alloy Structures, the STARLITE family provides an optimum alternative to current cadmium plated alloy steel or dry film lubed CRES nuts for new generation aircraft with extensive use of composite structure. Conventional Cadmium plated steel nut STR Titanium optimized nut MAIN FEATURES The STARLITE Titanium nuts meet the following requirements: Lightweight (savings against conventional alloy steel or CRES solutions). Designed to fit HI-LOK, HI-LITE or STL pins and compatible with standard bolts. Mechanical performance equivalent to existing steel or CRES nut standards on the market. Unmatched anti-galling due to combination of specific proprietary crimping process, optimized design and HI-KOTE 4 NC coating. No damage on composite material due to the optimized bearing surface. Available in a wide variety of diameters. ENVIRONMENTALLY FRIENDLY SOLUTION Compliance to health and environmental regulations using HI-KOTE 4 NC coating. HIGH PERFORMANCE The STR nut features reduced weight without compromising strength for replacement of conventional steel and CRES nut replacement: Ti6Al-4V raw material and fully optimized design reduce weight significantly. Additional volume reduction achieved within the low stressed area of conventional nuts design. WEIGHT SAVING 440+ lbs saving Low stressed area 220+ lbs saving STR 20K Steel Nuts Single Aisle Long range
3 STARLITE NUT FAMILY The wide range of STR nut types provides a solution for the main fastener systems: HI-LOK, HI-LITE, SLEEVE TAPER HI-LITE pins. Basic P/N Diameters (1/32 ) min. max. Pins family Plain Self aligning Self sealing STR10( ) 5 32 HI-LOK STR20( ) 5 36 HI-LITE STR40( ) 5 36 HI-LITE STR60( ) 6 36 STL STR70( ) 5 16 HI-LITE STR90( ) 6 32 STL
4 USER-FRIENDLY ASSEMBLY The STARLITE design is suitable for a wide range of assembly constraints associated with composite structures. Cleaner work environment HI-KOTE 4 NC coating contains improved lubricating agents in its formulation in order to avoid the use of cetyl alcohol as a secondary lubricant, thus authorizing a cleaner work environment and good paint or sealant adhesion. Compatibility with shank oversize 0.5 Max Tolerant to structure and assembly variations STR nuts are compatible with nominal, 1st and 2nd oversize pins. A specific reference is required only for 3rd oversize. Structure slope variation of 0.5 is accepted by the STARLITE plain nuts. Self aligning nut version allows for installation up to 5 angle. Limited structure damage Optimized bearing area eliminates damage to the structure and a captive washer solution is proposed for more severe applications. Conventional nut with small bearing area Reliable assembly with Titanium pins LISI AEROSPACE proprietary crimping process and HI-KOTE 4 NC coating guaranty superior anti-galling and assembly performances. STARLITE nut with optimized bearing area Locking torque 1,50 12 Torque (N.m) 1,00 0, Torque (in.lbs) 2 0, Number of tightening 0 Special crimping process finite element simulation No galling and low variation of locking torque, even after 5 cycles on a ¼ diameter Titanium pin. Easy identification In addition to manufacturer symbol, all STR nuts are marked with their reference number for easy identification.
5 SECURE INSTALLATION Required tooling STR nuts may be installed by one mechanic with manual, pneumatic, electric or battery powered tools, using the following socket sizes: Pin Ø (1/32 ) Wrench size (in.) /32 1/4 9/32 5/16 3/8 1/2 9/16 5/8 11/16 25/32 15/16 1-1/16 1-3/16 1-5/16 Battery powered tool Pneumatic tool Electronic sensor driver for a controlled speed and torque during installation Proven installation parameters During the process of development of the STR nuts, many installation test data have been compiled to define best assembly parameters. LISI AEROSPACE supplies torque and speed parameters for each nut diameter, allowing optimized tension in the assembly. Reliable and easy inspection STR nut installation can be inspected using conventional tools and gages. Detailed installation recommendations are provided in our installation specifications available upon request.
6 Fasteners Business Group Our locations worldwide Bangalore City of Industry Izmir Dorval Rugby Torrance City of Industry Saint-Brieuc Saint-Ouen L Aumône Torrance Seattle Vignoux-sur-Barangeon Villefranche-de-Rouergue Wichita OPTIBLIND fastener STARLITE nuts Standard nuts New York Dorval Special nuts / Shaft Nuts Nutplates / Clip nut HI-LOK / HI-LITE system Toulouse Villefranchede-Rouergue TAPER HI-LITE pins PULL-IN / PULL-STEM pins Rugby Saint-Brieuc São José Dos Campos Lockbolt STL sleeve fasteners LISI AEROSPACE Quai de la Râpée - CS Paris Cedex 12 - FRANCE Tel. +33 (0) Fax +33 (0) Paris Saint-Ouen l Aumône Vignoux-sur-Barangeon Standard threaded fasteners Special threaded fasteners Hamburg Inserts and studs Izmir Critical parts Lining / Insulation fasteners Panel fasteners Spacer / Stand-off / Wiring Bangalore HI-SET rivets Blind nuts / Blind bolts / ELLIP-NUT nuts Safety locking & Latches CLY temporary fasteners Shanghai Tooling Nagoya Find your LISI AEROSPACE contact at: , LISI AEROSPACE ASTER, ELLIP-NUT and TAPER-HI-LITE are trademarks of Blanc Aero Industries; HI-KOTE, HI-LITE, HI-LOK, HI-SET, HI-TIGUE, HL, HLT, HPL, HSL, HST, PULL-IN, PULL-STEM are trademarks of HI-SHEAR Corporation; A5L, CLY, CLAMPBERRY, OPTIBLIND, STARLITE, STL and STR are trademarks of LISI Aerospace Creation Design Media-06/2015
NEW GENERATION HI-LITE PIN FASTENING SYSTEM
NEW GENERATION HI-LITE PIN FASTENING SYSTEM HST HI-LITE PIN FASTENING SYSTEM This multi-purpose HI-LITE pin features a superior lightweight fastening system for clearance and interference fit holes in
More informationSTL SYSTEM. Innovative solution for lightning strike protection and interference fit application
STL SYSTEM Innovative solution for lightning strike protection and interference fit application GLOBAL SOLUTION DESCRIPTION The SLEEVE TAPER-HI-LITE SYSTEM, developed for new generation aircraft structure
More informationASTER SYSTEM. New High Torque Hold System
ASTER SYSTEM New High Torque Hold System GENERAL PRESENTATION DESCRIPTION OF THE OPTIMIZED RECESS The ASTER system offers superior performance in torque capability for one-sided installation of threaded
More informationEddie-Bolt 2 Fastening System PROCESS MANUAL
Eddie-Bolt 2 Fastening System PROCESS MANUAL Page Introduction 2 Anatomy of Eddie-Bolt 2 3 Part Number System 4 Recommended Hole Diameters 12 Hole Preparation 13 Grip Gaging 15 Installation Sequence 17
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation
More informationSECTION 3. BOLTS. bolt is a standard AN-type or a special-purpose bolt, and sometimes include the manufacturer.
9/8/98 AC 43.13-1B SECTION 3. BOLTS 7-34. GENERAL. Hardware is the term used to describe the various types of fasteners and small items used to assemble and repair aircraft structures and components. Only
More information9/8/98 AC B CAUTION THE FOLLOWING TORQUE VALUES ARE DERIVED FROM OIL FREE CADMIUM PLATED THREADS.
TABLE 7-1. Recommended torque values (inch-pounds). CAUTION THE FOLLOWING TORQUE VALUES ARE DERIVED FROM OIL FREE CADMIUM PLATED THREADS. TORQUE LIMITS RECOMMENDED FOR INSTAL- LATION (BOLTS LOADED PRIMARILY
More informationEN your reliable connection. Special blind rivet nuts
EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationHP-10 Hand Puller Operator Manual
401 Andover Park East Seattle, Washington 98188-7605 USA (206) 246-2010 FTI OPERATIONS, MAINTENANCE AND REPAIR MANUAL HP-10 Hand Puller Operator Manual Part #2720-076, Log #3243 Published February 2006
More informationCHERRY SST TM. Aerospace Fasteners BLIND RIVET SYSTEM U.S. PATENT NO. 4,012,984 5,052,870 5,056,973
CHERRY SST TM BLIND RIVET SYSTEM U.S. PATENT NO. 4,012,984 5,052,870 5,056,973 Aerospace Fasteners THE SST TM BLIND RIVET SYSTEM INDEX SST TM Blind Rivet Features and Benefits...1 SST TM Blind Rivet InstaIIation...
More informationTuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
More informationFasteners. Fastener. Chapter 18
Fasteners Chapter 18 Material taken from Mott, 2003, Machine Elements in Mechanical Design Fastener A fastener is any device used to connect or join two or more components. The most common are threaded
More informationTuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationTuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
More informationTECH SHEET PEM - REF / THREAD GALLING. SUBJECT: Root causes and guidelines to promote optimized fastener performance TECH SHEET
PEM - REF / THREAD GALLING SUBJECT: Root causes and guidelines to promote optimized fastener performance Introduction Occasionally, users of our self-clinching fasteners encounter thread binding issues
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationTuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationTuf-Lite III Fans K Hi Temp 3000KHT Series Hub
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III Hi Temp (Red) fan blades are of single
More informationTuf-Lite II Fans H Hi Temp 3000HT Series Hub
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are
More informationTex-452-A, Rotational Capacity Testing of Fasteners Using a Tension Measuring Device
Using a Tension Measuring Device Contents: Section 1 Overview...2 Section 2 Definitions...3 Section 3 Apparatus...4 Section 4 Part I, Rotational Capacity Testing...5 Section 5 Part II, Values for Fasteners
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationRailway. Smart solutions for the railway sector
Railway Smart solutions for the railway sector 1 «Fastening solutions for railway applications from A to Z. Bossard is your one-stop shop.» 2 SMART SOLUTIONS FOR THE RAILWAY SECTOR Better connected We
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationTAPTITE 2000 Fasteners
TAPTITE 2000 Fasteners Unique Design Increases Performance TAPTITE 2000 fasteners are designed to provide the benefits of previous TAPTITE fastener products with an innovative new thread design the Radius
More informationTAPTITE Fasteners. High Performance Thread Rolling Screws for Metals
TAPTITE 2000 Fasteners High Performance Thread Rolling Screws for Metals TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: 2007 13 CHEVY SILVERADO 1500 (except Classic ) MAX WINCH TRAY: HDX 46-22275 SPORTSMAN WINCH MOUNT GRILLE GUARD: 45-92270, 40-92275
More informationReplacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981
Page 1 of 12 Date: December 2, 1981 Subject: Models: Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System F-28C and 280C Effectivity: Helicopters manufactured prior to
More informationMECHANICAL ASSEMBLY John Wiley & Sons, Inc. M. P. Groover, Fundamentals of Modern Manufacturing 2/e
MECHANICAL ASSEMBLY Threaded Fasteners Rivets and Eyelets Assembly Methods Based on Interference Fits Other Mechanical Fastening Methods Molding Inserts and Integral Fasteners Design for Assembly Mechanical
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationPRODUCT: LOKI INSTALLATION INSTRUCTIONS. Product is covered by U.S. patents. For more information visit
R INSTALLATION INSTRUCTIONS PRODUCT: LOKI CONFIGURATION: SINGLE DOOR MOUNT: GLASS MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com . TOOLS + MATERIALS REQUIRED TOOLS
More informationBeschrijving onderdeel LVZC. Lockwiring and Fasteners TRAINING MANUAL LOCKWIRE, FASTENERS & HARDWARE COURSE. Ad Kennes Pagina 1 van 37
TRAINING MANUAL LOCKWIRE, FASTENERS & HARDWARE COURSE Ad Kennes Pagina 1 van 37 INDEX Lock Wiring/Safety Wiring What is Safety/Lock Wiring? Safety/Lock Wiring Examples Hardware and Fasteners Hardware Classification
More informationLOCTITE WEBINAR SERIES Threadlocking & the Torque-Tension Relationship
LOCTITE WEBINAR SERIES Threadlocking & the Torque-Tension Relationship Meet Your Presenters Doug Lescarbeau Michael Feeney Market Development Director Doug.Lescarbeau@Henkel.co m Application Engineer Michael.Feeney@Henkel.com
More informationAFB (AIR FAN BEARING) INSTALLATION GUIDE
654 AFB (AIR FAN BEARING) INSTALLATION GUIDE AFB PARTS Bearing Housing - Secured together with two 3/8 x 1.25 in. Cap Screws Black Wiper Seals - Secured together with O-ring cord (Subsequently depicted
More informationAUTOMOTIVE FASTENING TECHNOLOGY SPOKEN HERE.
AUTOMOTIVE FASTENING TECHNOLOGY SPOKEN HERE. ALCOA FASTENING SYSTEMS & RINGS. DRIVING AUTOMOTIVE FASTENING TECHNOLOGY FOR MORE THAN 5 DECADES. At Alcoa Fastening Systems & Rings (AFSR), we understand automotive
More informationUSER MANUAL Nord-Lock X-series washers
USER MANUAL Nord-Lock X-series washers JOINT GUIDE 3 ASSEMBLY INSTRUCTIONS 4 TECHNICAL DATA 5 TORQUE GUIDE 5 THE EXCEPTIONAL SYSTEM THAT PREVENTS BOLT LOOSENING AND SLACKENING Nord-Lock X-series washers
More informationService Bulletin No: Ref No: 136 Modification No: INSPECTION ATA Chapter: 57
PILATUS AIRCRAFT LTD. STANS, SWITZERLAND Service Bulletin No: 57-015 Ref No: 136 Modification No: INSPECTION ATA Chapter: 57 WING - AILERON INSTALLATION INSPECTION OF THE AILERON OUTBOARD-BEARING SUPPORT
More informationFM2113PC/FM2114PC SBC Top Mount Alt, w/ A/C & Power Steering
10) At this time assemble the power steering bracket and pump assembly from the instructions provided with the power steering bracket beginning at step 7. Return to step 10 on this sheet when complete.
More informationAttachment Illustrated Parts List
Attachment Illustrated Parts List Attachment Mfg. No. Description 1695168 Catcher, Clean Sweep Twin, 38" MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Part No.:
More informationFM2113PC/FM2114PC SBC Top Mount Alt, w/ A/C & Power Steering
10) At this time assemble the power steering bracket and pump assembly from the instructions provided with the power steering bracket beginning at step 7. Return to step 10 on this sheet when complete.
More informationAN, MS, NAS Bolts. AN3 20 bolts are identified by a multi-part code:
AN, MS, NAS Bolts Most bolts used in aircraft structures are either (a) general-purpose, (b) internal-wrenching or (c) close-tolerance AN, NAS, or MS bolts. Design specifications are available in MIL-HDBK-5,
More informationFASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
More informationCONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM
CONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM quick and easy to install no special installation equipment high strength excellent for new construction and rehab projects Bar-Lock Coupler System* ICBO
More informationGeneral Specification
General Specification CODE IDENT NO. 23835 SPEC NO. ES504255, REV I ISSUE DATE 2/9/99 SUPERSEDING ES504255 H DATED 6 JANUARY 1999 TORQUE REQUIREMENTS MECHANICAL THREADED FASTENERS (SPACECRAFT STRUCTURE
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationProcedure for Testing Direct Tension Indicators (DTI) Assemblies
Procedure for Testing Direct Tension Indicators (DTI) Assemblies 1. Scope: This test is to ensure that the bolt will be at or above the specified minimum bolt tension after installation when the direct
More informationSERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 6, 2012 Service Instruction No. 1458F (Supersedes Service Instruction
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationTAPTITE 2000 HEAT TREATMENT. Increased out of round of point threads. Low thread forming torque
TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners afford end-users with enhanced opportunities to reduce the overall
More informationAN, MS, NAS Bolts. AN3 20 bolts are identified by a multi-part code:
AN, MS, NAS Bolts Most bolts used in aircraft structures are either (a) general-purpose, (b) internal-wrenching or (c) close-tolerance AN, NAS, or MS bolts. Design specifications are available in MIL-HDBK-5,
More informationMTS-ACB. RENOGY Photovoltaic Module Adjustable Curved Bracket E Philadelphia St, Ontario, CA Version: 1.
MTS-ACB RENOGY Photovoltaic Module Adjustable Curved Bracket 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More information1. TOOLS + MATERIALS REQUIRED
R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: BI-PARTING DOOR MOUNT: TOP MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com. TOOLS + MATERIALS REQUIRED
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationMTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationBig Block Installation Manual For Systems without A/C
Big Block Installation Manual For Systems without A/C Billet Specialties, Inc. 500 Shawmut Ave. La Grange, IL 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 Hardware List For Chevrolet Big Block Tru
More informationS-BT screw-in stainless steel and carbon steel threaded studs
S-BT screw-in stainless steel and carbon steel threaded studs Product data Dimensions S-BT-MR M10/15 SN 6 S-BT-MR M10/15 SN 6 AL**) S-BT-MR W10/15 SN 6 S-BT-MR W10/15 SN 6 AL**) S-BT-MR M10/15 SN 5 ***)
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Running Boards Kit Nissan Pathfinder/ Infiniti QX60 999T6 X5060 (Pathfinder Running Board Kit) 999T6 R5060 (Infiniti QX60
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More informationPRODUCT: BALDUR + ODEN
R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: SINGLE DOOR MOUNT: GLASS MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com . TOOLS + MATERIALS REQUIRED
More information28" Adjustable Solar Tilt Mount ADJ-28. Owner's Manual. Please read this manual BEFORE installing your solar tilt mount
28" Adjustable Solar Tilt Mount ADJ-28 Owner's Manual Please read this manual BEFORE installing your solar tilt mount SECTION 1 Introduction Mounting your solar panel inclined to an optimized angle with
More informationDTFACT 16 C IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION
DTFACT 16 C 00047 IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION IESALC Fall Technology Meeting Government Contacts Subcommittee Dallas, TX October 23, 2017 Jeremy N. Downs,
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15.
The following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15. Please refer to the publication in its entirety for complete details on this product
More informationINSTRUCTION GUIDE S-WORKS MTN CARBON CRANKSET (Press-in and Standard OSBB cups)
INSTRUCTION GUIDE S-WORKS MTN CARBON CRANKSET (Press-in and Standard OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!
More informationCH # 8. Two rectangular metal pieces, the aim is to join them
CH # 8 Screws, Fasteners, and the Design of Non-permanent Joints Department of Mechanical Engineering King Saud University Two rectangular metal pieces, the aim is to join them How this can be done? Function
More informationUSSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:
More informationTypical Group D Rear Acoustical Cover Installation
SERIES 60 SERVICE MANUAL 1. Gear Case Cover 5. Bolt 2. Gear Case 6. Acoustical Cover 3. Acoustical Cover Snap 7. Acoustical Cover 4. Acoustical Cover Clip 8. Nut Figure 1-179 Typical Group D Rear Acoustical
More informationFront axle components, overview
j a t Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved, or
More information4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back
HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS PLATINUM 4 OVAL STEP BAR (90 BENT END) APPLICATION: 2010-2015 Dodge Ram 2500/3500 Mega Cab PART NUMBER: 21-3570, 21-3575, 23-3570, 23-3575, 25-3570, 25-3575,
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationLGP Lockbolts PROCESS MANUAL
LGP Lockbolts PROCESS MANUAL Contents:...Page Hole Preparation... 2 Installation Hints... 4 Basic Part Numbers... 5 Anatomy of LGP Lockbolt... 6 Recommended Hole Diameters... 7 Part Number Keys... 8 Recommended
More informationHuck BOM The Highest Strength Blind Fasteners in the World
Huck BOM The Highest Strength Blind Fasteners in the World Vibration Resistant Easy to Install Mechanically Locked 3/16" 3/4" The Huck BOM The Highest Strength Blind Oversize Fasteners in the World BOM
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationSolarWedge. Installation Manual Date Modified: 9/17/07 WARNING SAFETY. Tool List
APPLICATION: The product line provides an easy -to-install and economical solution for a 5, 10 or 15 degree tilted roof mounted system. integrates with Professional Solar s (ProSolar) patented top-down
More informationPowersafe Termination Guide
Powersafe Termination Guide Contents Index 1. Introduction 2. Overview 3. Termination Methods 3.1 Set screw termination 3.2. Recommended Assembly Procedure for Panel Mounted Connectors 3.3. Crimp Termination
More informationBRAVO STERN DRIVE 3 C BRAVO ONE
RAVO STERN DRIVE 3 C 22439 RAVO ONE Table of Contents Page Specifications............................... 3C-1 Torque Specifications..................... 3C-1 Preloads................................ 3C-1
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationREMINC WELCOMES AEROSPACE
Research Engineering & Manufacturing Inc. 55 Hammarlund Way, Tech II Middletown, RI U.S.A. Tel: (401) 841-8880 Fax: (401) 841-5008 Website: www.taptite.com E-mail: reminc@reminc.net REMINC WELCOMES AEROSPACE
More informationEP-60 END OF CAR JUNCTION BOX KIT and ASSEMBLY AND INSTALLATION INSTRUCTIONS
EP-60 END OF CAR JUNCTION BOX KIT 786282 and 786438 ASSEMBLY AND INSTALLATION INSTRUCTIONS Figure 1 EP-60 End of Car Junction Box Kit Item No. Qty. Description P/N Kit No. 786282 Kit No. 786438 1 2 Screw,
More informationTAPTITE 2000 Thread Rolling Fasteners
TAPTITE 2000 Thread Rolling Fasteners L e a d e r s i n L o w e r i n g t h e C o s t o f A s s e m b l y TAPTITE 2000 Fasteners TAPTITE 2000 thread forming technology joins two unique concepts and advances
More informationDesignation: F
Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under
More informationDisassembly Instructions - 1 hp. Planetary Reduction Gears
Disassembly Instructions - 1 hp. Planetary Reduction Gears Important: Use these instructions along with the tool parts page or manual. Notice: To avoid damage to the motor housing, use the Special Repair
More informationQuarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
More informationInstruction Manual for installing
Instruction Manual for installing Preloaded (HSFG) Bolting with TurnaSure DIRECT TENSION INDICATORS TurnaSure LLC TABLE OF CONTENTS Introduction... 1 Theory of Preloaded Bolting Assemblies... 2 Tightening
More informationODOT ITB Group 4 Item 33 Qty. 1
ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL
More informationInstallation Instructions: JK Inner Fender Liners Part Number(s): & Ratchet 3/8 & 7/16 Sockets. Plastic Clip Removal Tool
Page 1 of 5 Proudly Made In USA Installation Instructions: JK Inner Fender Liners Part Number(s): 400.300.170 & 400.300.180 Vehicle Fitment: 2007 - Present Jeep Wrangler & Unlimited Parts List Qty: 1 Driver
More informationRequired and optional* components/fastener torque spec
We d like to thank you for purchasing a ShuttleSlide product. We value your business and pride ourselves on superior craftsmanship and customer support. If there are any questions this document fails to
More informationMagna-Lok The World s Most Reliable Blind Fastening System
Magna-Lok The World s Most Reliable Blind Fastening System Solid Circle Lock Fast Installation Vibration Resistant 3/16", 1/4", 3/8", 1/2" Huck Magna-Lok For a Variety of Applications, Nothing Else Will
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationProcedure for Wrench Calibration and Snug Tightening
Procedure for Wrench Calibration and Snug Tightening 1. Scope: This procedure provides the method for calibration of a manual torque wrench or an adjustable impact wrench and the snug tightening procedure
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:
More informationHuck BOM. The highest strength blind fasteners in the world. Vibration resistant Easy to install Mechanically locked 3/16"-3/4"
Huck BOM The highest strength blind fasteners in the world. Vibration resistant Easy to install Mechanically locked 3/16"-3/4" 1 The Huck BOM The highest strength blind oversize fasteners in the world.
More informationERECTION & CONSTRUCTION
ERECTION & CONSTRUCTION High Strength Structural Bolting Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 24 th August 2007 Ref.: Key Words High Strength Bolts; Property Class
More information