NEW GENERATION HI-LITE PIN FASTENING SYSTEM
|
|
- Sharlene Sutton
- 6 years ago
- Views:
Transcription
1 NEW GENERATION HI-LITE PIN FASTENING SYSTEM
2 HST HI-LITE PIN FASTENING SYSTEM This multi-purpose HI-LITE pin features a superior lightweight fastening system for clearance and interference fit holes in composite, hybrid and metallic applications. HI-LITE REDUCED TRANSITION AREA (COUNTER BORE) GRIP PLANE HI-LITE PIN HI-LOK PIN The first load bearing thread was moved closer to the pin shank compared to the HI-LOK pin by designing new geometry for the thread run-out transition area. The length of the collar was reduced to match the geometry of the pin. Collar strength was increased. These design changes allow further shortening of pin thread length. HSTR NEW GENERATION HI-LITE PIN FASTENING SYSTEM ASTER Recess Higher torque transmission compared to the hex recess eliminates installation problems in clearance fit applications and especially on composite structures. Compatible with manual or automatic drivers. HI-KOTE 1 NC Coating Non-chromated coating meets the current environmental regulations. HI-KOTE 1 NC Coating is an enhanced coating for Titanium alloy, Nickel-Cobalt alloy and Stainless Steel fasteners providing safety in-process, at assembly and for the environment. It is a direct replacement for HI-KOTE 1 Coating. The ASTER System offers superior performance for one-sided installation of threaded fasteners.
3 OPTIMIZED ASTER RECESS The geometry of the ASTER recess is designed to reduce radial stress in the fastener, providing higher torque transmission, while simultaneously allowing recess depth reduction. Installation issues encountered with the hexagonal recess are resolved without impacting fastener performance. HIGHER TORQUE TRANSMISSION WITH ASTER SYSTEM Min. torsional strength ASTER system HEX recess Gain from 5 to +25% Diameter code COMPARISON HEX VS. ASTER RECESS Stress Comparison Hex recess rounded during Installation with failed driving bit wedged in position HEX Recess ASTER Recess ASTER RECESS INSTALLATION BENEFITS Improved ASTER key removal after installation (the hex key has a tendency to wedge itself into the recess). The ASTER key endures a higher number of installation cycles. ASTER recess increases ultimate torque without impacting fastener structural performance. More robust assembly process due to higher torque and improved driving tool life. Compatible with both manual and automatic drivers, and allows for easy engagement in the fastener recess. Already implemented on STL fasteners and associated installation tools.
4 HSTR NEW GENERATION HI-LITE PIN IS AVAILABLE IN ALL STANDARD HEAD STYLES Material Protruding Shear Protruding Tension 100 Flush Shear 100 Flush Tension 130 Flush Shear Titanium HSTR10 HSTR12 HSTR756 Nickel base alloy HSTR11 HSTR755 HSTR13 HSTR52 HSTR54 HSTR57 HSTR59 HSTR315 Corrosion Resistant Steel HSTR40 HSTR48 HSTR41 HSTR49 COMPATIBLE WITH ALL EXISTING HI-LITE COLLARS, HI-LITE HEX NUTS AND NEW STARLITE NUT Basic Standard Collar Self-aligning Standard Collar Self-sealing Standard Collar Basic Double-Hex Collar Self-aligning Double-Hex Collar Self-sealing Double-Hex Collar HI-LITE Nut STARLITE Nut HSTR NEW GENERATION HI-LITE PIN HAS EQUIVALENT PERFORMANCE CHARACTERISTICS OF THE HST PIN WITH ENHANCED INSTALLATION PERFORMANCE Existing pin New generation pin BASIC P/N HST(XX) HSTR(XX) EXAMPLE BASIC P/N HST12 HSTR12 RECESS TYPE HEX ASTER COATING Hi-KOTE 1 Hi-KOTE 1 NC INSTALLATION PERFORMANCE STANDARD SUPERIOR MECHANICAL PERFORMANCE EQUIVALENT
5 NEW GENERATION HSTR FASTENING SYSTEM IS FULLY COMPATIBLE WITH EXISTING STANDARD MANUAL AND POWER TOOLING (USE ASTER KEY IN PLACE OF HEX KEY) Power Tool with ASTER Key Hex Drive Socket and ASTER Key Manual ASTER L-key ASTER Key Hand Tool with Removable ASTER Keys Why use the new generation HSTR HI-LITE pin with ASTER recess and HI-KOTE 1 NC coating: Superior ASTER recess performance Meets current environmental regulations Enhanced installation using conventional tooling Mechanical performance equivalent to HST HI-LITE pin
6 Fasteners Business Group Our locations worldwide Bangalore City of Industry Izmir Dorval Rugby Torrance City of Industry Saint-Brieuc Saint-Ouen L Aumône Torrance Seattle Vignoux-sur-Barangeon Villefranche-de-Rouergue Wichita OPTIBLIND fastener STARLITE nuts Standard nuts New York Dorval Special nuts / Shaft Nuts Nutplates / Clip nut HI-LOK / HI-LITE system Toulouse Villefranchede-Rouergue TAPER HI-LITE pins PULL-IN / PULL-STEM pins Rugby Saint-Brieuc São José Dos Campos Lockbolt STL sleeve fasteners LISI AEROSPACE Quai de la Râpée - CS Paris Cedex 12 - FRANCE Tel. +33 (0) Fax +33 (0) Paris Saint-Ouen l Aumône Vignoux-sur-Barangeon Standard threaded fasteners Special threaded fasteners Hamburg Inserts and studs Izmir Critical parts Lining / Insulation fasteners Panel fasteners Spacer / Stand-off / Wiring Bangalore HI-SET rivets Blind nuts / Blind bolts / ELLIP-NUT nuts Safety locking & Latches CLY temporary fasteners Shanghai Tooling Nagoya Find your LISI AEROSPACE contact at: , LISI AEROSPACE ASTER, ELLIP-NUT and TAPER-HI-LITE are trademarks of Blanc Aero Industries HI-KOTE, HI-LITE, HI-LOK, HI-SET, HI-TIGUE, HL, HLT, HPL, HSL, HST, PULL-IN, PULL-STEM are trademarks of HI-SHEAR Corporation A5L, CLY, CLAMPBERRY, OPTIBLIND, STARLITE, STL and STR are trademarks of LISI Aerospace Creation Design Media-06/2013
STARLITE NUT FAMILY. New high strength titanium nut family
STARLITE NUT FAMILY New high strength titanium nut family Designed for Composite, Titanium and Aluminum Alloy Structures, the STARLITE family provides an optimum alternative to current cadmium plated alloy
More informationASTER SYSTEM. New High Torque Hold System
ASTER SYSTEM New High Torque Hold System GENERAL PRESENTATION DESCRIPTION OF THE OPTIMIZED RECESS The ASTER system offers superior performance in torque capability for one-sided installation of threaded
More informationSTL SYSTEM. Innovative solution for lightning strike protection and interference fit application
STL SYSTEM Innovative solution for lightning strike protection and interference fit application GLOBAL SOLUTION DESCRIPTION The SLEEVE TAPER-HI-LITE SYSTEM, developed for new generation aircraft structure
More informationEN your reliable connection. Special blind rivet nuts
EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation
More informationEddie-Bolt 2 Fastening System PROCESS MANUAL
Eddie-Bolt 2 Fastening System PROCESS MANUAL Page Introduction 2 Anatomy of Eddie-Bolt 2 3 Part Number System 4 Recommended Hole Diameters 12 Hole Preparation 13 Grip Gaging 15 Installation Sequence 17
More informationSECTION 3. BOLTS. bolt is a standard AN-type or a special-purpose bolt, and sometimes include the manufacturer.
9/8/98 AC 43.13-1B SECTION 3. BOLTS 7-34. GENERAL. Hardware is the term used to describe the various types of fasteners and small items used to assemble and repair aircraft structures and components. Only
More informationAUTOMOTIVE FASTENING TECHNOLOGY SPOKEN HERE.
AUTOMOTIVE FASTENING TECHNOLOGY SPOKEN HERE. ALCOA FASTENING SYSTEMS & RINGS. DRIVING AUTOMOTIVE FASTENING TECHNOLOGY FOR MORE THAN 5 DECADES. At Alcoa Fastening Systems & Rings (AFSR), we understand automotive
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationCHERRY SST TM. Aerospace Fasteners BLIND RIVET SYSTEM U.S. PATENT NO. 4,012,984 5,052,870 5,056,973
CHERRY SST TM BLIND RIVET SYSTEM U.S. PATENT NO. 4,012,984 5,052,870 5,056,973 Aerospace Fasteners THE SST TM BLIND RIVET SYSTEM INDEX SST TM Blind Rivet Features and Benefits...1 SST TM Blind Rivet InstaIIation...
More informationRIVETS AND THREADED INSERTS
RIVETS AND THREADED INSERTS Tri-Clamp, Multi-Grip, Dome Head and Stainless Steel Rivets Multi-Grip Rivets Adapt to All Material Types and Thicknesses Threaded Inserts Install Threads Into Blind Areas and
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)
More informationBolt Material Types and Grades 1- Bolts made of carbon steel and alloy steel: 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9 Nuts made of carbon steel and alloy
Bolt Material Types and Grades 1- Bolts made of carbon steel and alloy steel: 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9 Nuts made of carbon steel and alloy steel: 4, 5, 6, 8, 10, 12 2- Bolts made of stainless
More informationMECHANICAL ASSEMBLY John Wiley & Sons, Inc. M. P. Groover, Fundamentals of Modern Manufacturing 2/e
MECHANICAL ASSEMBLY Threaded Fasteners Rivets and Eyelets Assembly Methods Based on Interference Fits Other Mechanical Fastening Methods Molding Inserts and Integral Fasteners Design for Assembly Mechanical
More informationUSA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Rivet Solutions E2384 V1 (1/18) V1 (1/18)
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Rivet Solutions E2384 V1 (1/18) V1 (1/18) LAWSON PRODUCTS RIVET SOLUTIONS Rivets A rivet is a mechanical fastener that provides
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationReplacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981
Page 1 of 12 Date: December 2, 1981 Subject: Models: Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System F-28C and 280C Effectivity: Helicopters manufactured prior to
More informationTuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
More informationTuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
More informationTuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More informationTuf-Lite II Fans H Hi Temp 3000HT Series Hub
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are
More informationTuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
More informationTuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationHUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS AUTO-BULB PROTRUDING
HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS D C B PROTRUDING A 121 HUCK INTERACTIVE CD ROM : DIMENSIONS Min Max Max Max Max Nominal Nominal Diameter Hole Size Hole Size B C D A MIN GRIP MAX GRIP Family
More information1/2/2016. Lecture Slides. Screws, Fasteners, and the Design of Nonpermanent Joints. Reasons for Non-permanent Fasteners
Lecture Slides Screws, Fasteners, and the Design of Nonpermanent Joints Reasons for Non-permanent Fasteners Field assembly Disassembly Maintenance Adjustment 1 Introduction There are two distinct uses
More informationSingle Sided Fasteners. Adapters. Specialty Tools West Valley Highway Kent, WA Ph:
Single Sided Fasteners Adapters Specialty Tools PATENTED AND PATENT PENDING DESIGNS. Corporate Contacts Brian McClain President Kent, Washington Office: 1-253-872-4773 Brian.McClain@centrix-us.com JD Spartz
More informationFastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq
More informationAuto-Bulb. Huck s unique bulbing fastener for automated, high-speed assemblies. Sheet line bulbing Available in stainless steel High shear strength
Auto-Bulb Huck s unique bulbing fastener for automated, high-speed assemblies. Sheet line bulbing Available in stainless steel High shear strength Huck Auto-Bulb An easy-to-install bulbing fastening system
More informationMagna-Bulb. Unique bulbing fastener with large blind-side surface
Magna-Bulb Unique bulbing fastener with large blind-side surface High pull-out resistance Mechanical, solid-circle lock design for high strength Broad bearing surface Huck Magna-Bulb A unique bulbing fastener
More informationHEICO FASTENING SYSTEMS. Simple Fast Reliable HEICO-TEC TENSION NUT
HEICO FASTENING SYSTEMS Simple Fast Reliable HEICO-TEC TENSION NUT WWW.HEICO-TEC.COM HEICO-TEC TENSION NUT SIMPLE FAST RELIABLE For a secure joint with a HEICO-TEC tension nut, no electric, hydraulic,
More informationQuarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationThe Ensat self-tapping threaded
The nsat self-tapping threaded insert nsat is a self-tapping threaded insert with external and internal threads,cutting slots or cutting bores. A continuous process of further development has brought about
More informationTex-452-A, Rotational Capacity Testing of Fasteners Using a Tension Measuring Device
Using a Tension Measuring Device Contents: Section 1 Overview...2 Section 2 Definitions...3 Section 3 Apparatus...4 Section 4 Part I, Rotational Capacity Testing...5 Section 5 Part II, Values for Fasteners
More informationMTS-ACB. RENOGY Photovoltaic Module Adjustable Curved Bracket E Philadelphia St, Ontario, CA Version: 1.
MTS-ACB RENOGY Photovoltaic Module Adjustable Curved Bracket 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationA leading supplier & manufacturer of precision engineered components
A leading supplier & manufacturer of precision engineered components T: +44 (0) 1536 461140 F: +44 (0) 1536 461662 E: sales@technifast.co.uk W: www.technifast.co.uk T: +44 (0) 1536 461140 F: +44 (0) 1536
More informationMODEL 36 Di-Acro Hand Shear
OPERATOR S MANUAL & INSTRUCTIONS MODEL 36 Di-Acro Hand Shear Di-Acro, Incorporated PO Box 9700 Canton, Ohio 44711 3713 Progress Street N.E. Canton, Ohio 44705 330-455-1942 330-455-0220 (fax) Revised 01/02
More informationTuf-Lite III Fans K Hi Temp 3000KHT Series Hub
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III Hi Temp (Red) fan blades are of single
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationMTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationSockets. Dimensions; Mechanical & Performance Requirements. Socket Head Cap Screws Body & Grip Lengths - Socket Cap Screws...
imensions; Mechanical & Performance Requirements Socket Head Cap Screws... 2-4 Body & Grip Lengths - Socket Cap Screws... 5-6 Low Head Socket Cap Screws... 7 Button Head Socket Cap Screws... 8 Flat Head
More informationHuck BOM The Highest Strength Blind Fasteners in the World
Huck BOM The Highest Strength Blind Fasteners in the World Vibration Resistant Easy to Install Mechanically Locked 3/16" 3/4" The Huck BOM The Highest Strength Blind Oversize Fasteners in the World BOM
More informationPOP BLIND RIVET NUTS.
POP BLIND RIVET NUTS www.emhart.com POP NUT Blind Rivet Nuts Introduction POP NUT brand blind rivet nuts are internally threaded rivets that can be installed into sheet-metal, tubing, extrusions, plastics
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationCable Railing Kit Application Guide
Cable Railing Kit Application Guide January 2019 Nationwide Industries 10333 Windhorst Rd. Tampa, FL 33619 813.988.2628 Fax: 813.988.3465 Photo courtesy of FabWorx Framework You Will Need for Cable Railing
More informationSECTION 7. SAFETYING
9/8/98 AC 43.13-1B SECTION 7. SAFETYING 7-122. GENERAL. The word safetying is a term universally used in the aircraft industry. Briefly, safetying is defined as: Securing by various means any nut, bolt,
More informationDimensions Mechanical and Performance Requirements. Drop-In Anchors Hollow Wall, Steel Regular Style Drive Style...
Dimensions Mechanical and Performance Requirements Drop-In Anchors... 257 Hollow Wall, Regular Style... 258 Drive Style... 259 Hollow Wall, Plastic Ribbed... 260 Conical, Light Duty... 261 Fluted, Light
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationSCREWDRIVers, multi-bit tools & hex keys
66 SCREWDRIVers, multi-bit tools & hex keys INNOVATIVE MULTI-TOOLS DESIGNED TO DELIVER EASE & DURABILITY TO TACKLE ANY JOB The innovative lineup of IRWIN Multi-Bit Drive Tools has been designed to address
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More information0226/18-V1-02 IMTEC HR. High mechanical Resistance fastener for composite materials
0226/18-V1-02 IMTEC HR High mechanical Resistance fastener for composite materials IMTEC HR Cold forged fastener BÖLLHOFF used its expertise in assembly technologies to combine the best of metals and plastics.
More informationHuck BOM. The highest strength blind fasteners in the world. Vibration resistant Easy to install Mechanically locked 3/16"-3/4"
Huck BOM The highest strength blind fasteners in the world. Vibration resistant Easy to install Mechanically locked 3/16"-3/4" 1 The Huck BOM The highest strength blind oversize fasteners in the world.
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationW-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
More informationCone. Bolt. Rubber Washer. Rubber Washer. compressed / increased clamping force
Type HB - Hollo-Bolt Cavity Fixings 2 Type HB - Hollo-Bolt Steel, bright zinc plated plus JS 500 Steel, hot dip galvanised Stainless Steel Grade 316 Collar Sleeve Cone Bolt Suitable for hollow sections,
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationBeschrijving onderdeel LVZC. Lockwiring and Fasteners TRAINING MANUAL LOCKWIRE, FASTENERS & HARDWARE COURSE. Ad Kennes Pagina 1 van 37
TRAINING MANUAL LOCKWIRE, FASTENERS & HARDWARE COURSE Ad Kennes Pagina 1 van 37 INDEX Lock Wiring/Safety Wiring What is Safety/Lock Wiring? Safety/Lock Wiring Examples Hardware and Fasteners Hardware Classification
More informationHEICO-LOCK WEDGE LOCK WASHERS
HEICO-LOCK WEDGE LOCK WASHERS WEDGE LOCK WASHERS The Heico-Lock wedge locking system delivers high quality anti-vibration security for the most demanding of bolted joint applications. Even under extremes
More informationFM2113PC/FM2114PC SBC Top Mount Alt, w/ A/C & Power Steering
10) At this time assemble the power steering bracket and pump assembly from the instructions provided with the power steering bracket beginning at step 7. Return to step 10 on this sheet when complete.
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationThe New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms
SRB PRECAST FORMWORK The New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms Australian Designed and Manufactured to suite Robust and Demanding requirements of the Precast Industry.
More informationMagna-Lok The World s Most Reliable Blind Fastening System
Magna-Lok The World s Most Reliable Blind Fastening System Solid Circle Lock Fast Installation Vibration Resistant 3/16", 1/4", 3/8", 1/2" Huck Magna-Lok For a Variety of Applications, Nothing Else Will
More informationC50L HuckBolt. Huck-Engineered Lockbolts for the Most Challenging Applications. Vibration Resistant Longer Fatigue Life Consistent Installations
C50L uckbolt uck-engineered Lockbolts for the Most Challenging Applications Vibration Resistant Longer Fatigue Life Consistent Installations 1/2", 1-3/8" C50L uckbolt rade 5 Fasteners Certified to Meet
More informationExtracts without expanding material Ideal for pipes and fittings Works on left-hand or right-hand threads
Serious Solutions for Stuck Fasteners IRWIN Tools has the solution to deal with a stuck fastener, a rounded or broken head, a snapped stud, or a stripped screw or fitting. Five different styles of extractors
More informationFM2113PC/FM2114PC SBC Top Mount Alt, w/ A/C & Power Steering
10) At this time assemble the power steering bracket and pump assembly from the instructions provided with the power steering bracket beginning at step 7. Return to step 10 on this sheet when complete.
More informationSnap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel. Contents
Snap Tabs, etc. Stainless Steel Helmets Snap Tabs, Chin Strap, and Earphone Retainers Snap Tabs, Chin Strap, Swing Catch, Sealed Pull Pins Stainless Steel Contents SSBTM-1 1.1 Snap Tabs, Chin Strap, and
More informationSERVICE PARTS LIST. M18 FUEL SAWZALL Reciprocating Saw F56A BULLETIN NO CATALOG NO
47(5x) 46 45 00 44 0 59 43 42 84 51 57 46 47 48 59 83 64 77 48 47(2x) 49(2x) 40 58 See service note on page 5 41 82 51 40 41 42 43 44 45 87 52 27 28 34 57 29 (6x) 60 28 EXAMPLE: Component Parts (Small
More informationFastener Design. Fastener Materials. Coated Corrosion-Resistant Fasteners. Metal Alloy Capped Fasteners
Threaded fasteners for roofing and siding systems are available in a wide range of materials, designs, and coatings. When specifying your fastener, be sure to choose one that has a performance life equaling
More informationWESCON DSI DESIGNED SOLUTIONS INCORPORATED
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / FAX 949.916.0236 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over thirty-five
More informationHuck BOM The highest strength blind fasteners in the world
Huck BOM The highest strength blind fasteners in the world Vibration resistant Easy to install Mechanically locked 3/16"-3/4" The Huck BOM The highest strength blind oversize fasteners in the world. BOM
More informationChoosing the right puller for the job. Types of Puller
Pullers Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationTAPTITE 2000 Fasteners
TAPTITE 2000 Fasteners Unique Design Increases Performance TAPTITE 2000 fasteners are designed to provide the benefits of previous TAPTITE fastener products with an innovative new thread design the Radius
More informationFastener Math and Terminology
Fastener Math and Terminology There are some things about dealing with fasteners that will be easier if you understand the terms and mathematics associated with them. To many of you this will be a review,
More informationFace Mount to Through-the-Post Mount
Face Mount to Through-the- Mount Cable Runs through Two Corners When going around two corners, it s necessary to tension the cable from both ends as shown in Deck 4. Use the 672 series The tensioning devices
More informationAT ADAPTER INSTALLATION INSTRUCTIONS
IMPORTANT: THIS IS A HIGH PERFORMANCE PART AND IMPROPER INSTALLATION COULD RESULT IN INJURY OR DEATH! NEVER WORK UNDER AN AUTOMOBILE THAT IS NOT PROPERLY SUPPORTED AND BLOCKED FROM ROLLING. NO CREDIT OR
More informationXXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationMSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: C Approved By: Quality Engineer Date: 201-1-9 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationCHERRYLOCK 'A' BLIND RIVET
CHERRYLOCK 'A' BLIND RIVET SPS Fastener Division, a PCC Company CONTENTS CHERRYLOCK 'A' RIVET NAS1/1(A) CODE CR2172/7 ALUMINUM CR2572/7 MONEL CR2672/7 A-26 Features... 1 Installation... 1 Physical Properties...
More informationMagna-Lok The World s Most Reliable Blind Fastening System
Magna-Lok The World s Most Reliable Blind Fastening System Solid circle lock Fast installation Vibration resistant 3/16"-1/2" Huck Magna-Lok Magna-Lok. For a variety of applications, nothing else will
More information9/8/98 AC B CAUTION THE FOLLOWING TORQUE VALUES ARE DERIVED FROM OIL FREE CADMIUM PLATED THREADS.
TABLE 7-1. Recommended torque values (inch-pounds). CAUTION THE FOLLOWING TORQUE VALUES ARE DERIVED FROM OIL FREE CADMIUM PLATED THREADS. TORQUE LIMITS RECOMMENDED FOR INSTAL- LATION (BOLTS LOADED PRIMARILY
More informationAVK High Strength Blind Threaded Fasteners. Ideal for blind applications
High Strength Blind Threaded Fasteners Ideal for blind applications AVK Spinwall Technology How Hole Fill Works For You As the AVK insert is installed, the knurled body expands 360 to create hole fill.
More informationAN, MS, NAS Bolts. AN3 20 bolts are identified by a multi-part code:
AN, MS, NAS Bolts Most bolts used in aircraft structures are either (a) general-purpose, (b) internal-wrenching or (c) close-tolerance AN, NAS, or MS bolts. Design specifications are available in MIL-HDBK-5,
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationLow Voltage Electromagnetic Lockbolt Installation
922406 Low Voltage Electromagnetic Lockbolt Installation John Hartmann, Michael Assadi, Scott Tomchick, and John Barry Electroimpact. Inc. Andrew Roberts British Aerospace Abstract British Aerospace, Airbus
More informationMSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: B Approved By: Quality Engineer Date: 2014-12-16 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
More informationTuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationCENTRIFUGAL PUMPS FPE Series
OPERATING MANUAL CENTRIFUGAL PUMPS FPE Series Model : Model No.: Table of Contents Page 1. Maintenance 1 1.1. Disassembly 1 1.1.1. General 1 1.1.2. Impeller 1 1.1.3. Complete disassembly 1 1.2. Assembly
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More informationT HE N EED F OR A N I MPROVED D RIVE S YSTEM
TORX DRIVE SYSTEM T HE N EED F OR A N I MPROVED D RIVE S YSTEM Joint reliability, worker safety, downtime, product quality all are affected by the drive system you select for your assembly line. There
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationChapter 7. Fasteners
Chapter 7 Fasteners LEARNING OBJECTIVES After studying this chapter, students will be able to: Identify several types of fasteners. Explain why inch-based fasteners are not interchangeable with metric-based
More information