CHERRYLOCK 'A' BLIND RIVET
|
|
- Ilene Jackson
- 6 years ago
- Views:
Transcription
1 CHERRYLOCK 'A' BLIND RIVET SPS Fastener Division, a PCC Company
2 CONTENTS CHERRYLOCK 'A' RIVET NAS1/1(A) CODE CR2172/7 ALUMINUM CR2572/7 MONEL CR2672/7 A-26 Features... 1 Installation... 1 Physical Properties... 2 Numbering System... 2 Materials... 2 Strength... 2 Installed Weights Pounds per 1000 pieces... Wiredraw Nominal NAS1 100 Flush Head... Wiredraw Nominal NAS1 Universal Head... 5 Installation Tooling... 6 Power Riveters... 7 Hand Riveters... Pulling Heads... LIMITED WARRANTY Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of companies manufacturing industrial or aerospace fasteners. In the event of any breach of the foregoing warranty, Buyer s sole remedy shall be to return defective goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at the Seller s option. Seller agrees to any freight costs in connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement goods shall be Buyer s responsibility. SELLER S WARRANTY DOES NOT APPLY WHEN ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE PRODUCT IS MADE BY BUYER. THE FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES; ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND EXCLUDED BY SELLER. This warranty is void if seller is not notified in writing of any rejection of the goods within one (1) Year after initial use by buyer of any power Riveter or ninety (0) days after initial use of any other product. Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE HEREBY EXPRESSLY EXCLUDED. Our policy is one of continuous development. Specifications shown in this document may be subject to changes introduced after publication. CHERRY, Cherrylock and MAXIBOLT are trademarks of Cherry Aerospace. NOTE The properties, strengths, dimensions, installed characteristics and all other information in this catalog is for guidance only to aid in the correct selection of the products described herein and is not intended or implied as part of the warranty. applications should be evaluated for functional suitability and available samples of the described parts can be requested for installed tests, suitability and evaluations. ATTENTION Blind rivets are not always a suitable substitute for solid rivets. Maintenance personnel are reminded that AC.1-1A chapter 2, section, stipulates: Do not substitute hollow rivets for solid rivets in load carrying members without specific approval of the application by a representative of the Federal Aviation Administration. Blind rivets may be used in blind locations in accordance with the conditions listed in Chapter 5, provided the edge distances and spacings are not less that the minimum listed in paragraph d.
3 CherryLOCK A Code non-shift, self-plugging blind rivets provide excellent hole-fill and sheet take-up capability conforming to the Procurement Specification NAS 100 and Standards Pages NAS 1 and NAS 1. The rivets are available in aluminum, monel and A-26 stainless steel materials in a wide variety of diameters and grip ranges. CherryLOCK A Code wiredraw rivets are manufactured in /2", 1/", 5/2", /16" and 1/" diameters in 100 flush head and protruding head style configurations and offer grip ranges from.020 in the smaller diameters to 1.07 in the larger diameters. The /2" diameter rivet is available in A-26 only with grips ranging from.020 to.562. Rivets 1/" diameter and larger have head markings to identify grip, material and manufacturer for ready inspection. The flush fracturing spindle eliminates the need for shaving and meets the flushness requirement of the NAS 100 specification. Each rivet is provided with its own locking mechanism that positively retains the plug section meeting specification push-out values and assuring no lost stems. These rivets allow simple installation with a wide variety of Cherry nonshifting and shifting tools. A complete range of recommended power tools, hand tools and pulling heads are described in the back section of this catalog. CHERRYLOCK 'A' RIVET FEATURES INSTALLATION OF CHERRYLOCK A CODE 1
4 CHERRYLOCK 'A' RIVET PHYSICAL PROPERTIES NUMBERING SYSTEM CR2672CW Maximum Grip Length in 16ths of an inch (-0 = /16"=.250) Shank Diameter -(.10), (.17), (.201) Cherry Part Number (Material, Head Style, Series) MATERIALS CherryLOCK A rivets are manufactured in a wide variety of materials in order to give the user the widest possible choice for optimum design. Rivet Material Ultimate ShearStrength (at room temp) Typical Max Temperature Use (in F) Sleeve Stem 2017 Aluminum 7075 Aluminum,000 psi 250 Monel Monel 55,000 psi 00 A-26 CRES A-26 CRES 75,000 psi 1200 STRENGTH Minimum Ultimate rivet shear and tensile strength (lbs.) per NAS 100 CherryLOCK A Rivets Aluminum CR2172 CR217 Single Shear Tensile /2" 1/" 5/2" /16" 1/" /2" 1/" 5/2" /16" 1/" Monel CRES CR2572 CR257 CR2672 CR NOTES: Values shown are fastener capabilities only Consult Mil-Hdbk for joint design allowables /2" DIAMETER RIVETS AVAILABLE IN CR2672 AND CR267 ONLY NAS/Cherry Part Number Cross Reference Guide NAS1C( )A( ) / CR2672-( )-( ) NAS1C( )A( ) / CR267-( )-( ) NAS1CW( )A( ) / CR2672CW-( )-( ) NAS1CW( )A( ) / CR267CW-( )-( ) NAS1D( )A( ) / CR2172-( )-( ) NAS1D( )A( ) / CR217-( )-( ) NAS1M( )A( ) / CR2572-( )-( ) NAS1M( )A( ) / CR257-( )-( ) NAS1MW( )A( ) / CR2572P-( )-( ) NAS1MW( )A( ) / CR257P-( )-( ) 2
5 CHERRYLOCK 'A' RIVET INSTALLED WEIGHTS Pounds per 1000 pieces Dash Number CR2172 CR217 CR2572 CR257 CR2672 CR
6 100 ±1 ALUM. 100 ±1 1 /2 MONEL AND A26 CHERRYLOCK 'A' RIVET WIREDRAW NOMINAL NAS1 100 FLUSH HEAD.010 R. MAX ALUM..020 R. MAX MONEL AND A26 C Dia A B D Hole Limits C Dash No. ±.00 Ref Min Max Alum. oy Monel or A Grip Dash Grip Range - Diameter - Diameter Diameter Diameter - Diameter No. Min Max L Max K Max BK L Max K Max BK L Max K Max BK L Max K Max BK L Max K Max BK NAS Material Finish Part No. NAS No. 52 Code Sleeve Stem Lock Ring Sleeve Stem Lock Ring CR2172 1D ACF 2017-T PER 5056-H PER ANODIZE PER MIL-A25 OR CHEM FILM 7075 PER QQ-A-0 QQ-A-0 QQ-A-0 CHEM FILM PER MIL-C51 PER MIL-C51 NONE CR2572 1M ACT MONEL PER QQ-N- NONE MONEL: NONE MONEL PER 21 OR A26 PER MONEL PER CAD PLATE PER QQ-P-16 CR2572P 1MW ACK A26 PASSIVATE PER QQ-N-21 AMS 571 OR QQ-N-21 TYPE II, CL2 AMS 2700 CR2572S 1MS ACV AMS 572 SILVER PLATE PER QQ-S5 NONE CR2672 1C ACX A-26 CRES PASSIVATE PER AMS 2700 A-26 CRES PER MONEL PER CR2672CW 1CW AFE PER AMS 571, CAD PLATE PER QQ-P-16 AMS 571 QQ-N-21 CR2672S 1CS AFF 572, 577 SILVER PLATE PER QQ-S5 PASSIVATE PER AMS 2700 NONE An increase of permissible within of base of head. Minimum blind side clearance for satisfactory installation. Material designation refers to chemical composition only. Minimum grip for - diameter is.06, for diameter is.065 and for diameter is.00. Single digit marking is permissible, at manufacturer s option, for grip dash (-) numbers less than 10. No head marking for - diameter rivet. NOTES: Single sheet thickness for machine countersunk holes shall not be less than B Some longer grip lengths are manufactured only on special request.
7 CHERRYLOCK 'A' RIVET WIREDRAW NOMINAL NAS1 UNIVERSAL HEAD.010 R. MAX ALUM..020 R. MAX MONEL AND A26 A Hole Limits Grip Dash No. Min Min B D Undercut Min Max Grip Dash Grip Range - Diameter - Diameter Diameter Diameter - Diameter No. Min Max L Max K Max BK L Max K Max BK L Max K Max BK L Max K Max BK L Max K Max BK Part NAS NAS 52 Material Finish No. No. Code Sleeve Stem Lock Ring Sleeve Stem Lock Ring An increase of permissible within base of head. Minimum blind side clearance for satisfactory installation. Material designation refers to chemical composition only. Minimum grip for - diameter is.020, - diameter is.025, for diameter is.01 and for diameter is.07. Single digit marking is permissible, at manufacturer s option, for grip dash (-) numbers less than 10. No head marking for - diameter rivet. NOTES: Some longer grip lengths are manufactured only on special request. 5
8 CHERRYLOCK 'A' RIVET TOOLING Type of Tool Hand Hydraulics Pneumatic Cherry Riveter Model Pulling Head (series) Rivet & Head Dia. Max Grip/Single Stroke Aluminum Monel A26 CRES CR2172 CR217 CR2572 CR257 CR2672 CR267 G27* - G2* - G0 - G750A G700 G77 G70B G76A G7 G6 H055 with 750A-117 Adapter H055 with 60B6 Adapter H55 H55 H55 H055 with 60B6 Adapter H0- with 60B57 Adapter H055 with 60B6 Adapter ** G02 H02-NPR*** - G02-15 H015-C - ** * Use 72-0 Nosepiece (sold separately) ** May require 5 psi ***Use 02-0 Nosepice (sold separately) 6
9 G76A POWER RIVETER National Stock Number The Cherry G76A is a pneumatic-hydraulic tool designed for the efficient installation of CherryLOCK A code rivets for the -, -, and diameter rivets. It weighs pounds and can be operated in any position with one hand. It has a.5 inch rivet setting stroke and a rated pull load of 150 pounds on 0 psi air pressure at the air inlet. The G76A consumes approximately. cubic feet of air at 20 cycles per minute and the maximum noise level under load does not exceed 5 db (A). Pulling heads are not furnished with this riveter and must be ordered separately. The G76A with the H55 series (straight) and the H6 series right angle pulling heads can install CherryLOCK A blind rivets in the -, -, and diameters in all materials. CHERRYLOCK 'A' RIVET INSTA LLATION TOOLING 76A Power Riveter.71" (1. mm) G77 POWER RIVETER 10 The Cherry G77 is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryLOCK A rivets. Its durable, all metal housing makes this extremely robust tool ideal for use in rugged shop environments. It has many ergonomic features; very light weight (.5 lbs.), comfortable fit in the operator s hand and it can be operated in any position with one hand. Pulling heads are not furnished with this riveter and must be ordered separately. The G77 with the H55 series (straight) and the H6 series right angle pulling heads can install CherryLOCK A blind rivets in the -, -, and diameters in all materials. 2" (50. mm) 11.7" (2. mm).56" (115. mm) G77 Power Riveter G70B RIVETER National Stock Number The Cherry G70B is a pneumatic-hydraulic tool designed specifically for the most efficient installation of CherryLOCK A rivets. Its durable, all metal housing makes this extremely robust tool ideal for use in rugged shop environments. It has many ergonomic features; light weight (.25 lbs.), comfortable fit in the operator s hand and it can be operated in any position with one hand. Pulling heads are not furnished with this riveter and must be ordered separately. The G70B with the H55 series (straight) and the H6 series right angle pulling heads can install CherryLOCK A blind rivets in the -, -, and diameters in all materials. 70B Riveter 7
10 G0 HAND RIVETER National Stock Number For installation of CherryLOCK A Locked Spindle Nutplate Rivets, CR2672 and CR267 Series, - diameter. The Cherry G0 Hand Riveter is an efficient, compact, lightweight and economical tool for installation of CherryLOCK A rivets. Provided with this tool is a special designed nose piece which is essential for the proper insertion of the rivet locking collar. The G0 is.25 long, weighs just 1 ounces and is intended for use where access of power limitations prevent the use of Cherry power tools and generally where smaller quantities of rivets are to be installed. This tool will also install the Cherry CCR26/27 series rivets with a 72A series nosepiece. To operate, insert the serrated stem of the rivet into the nosepiece. Insert the rivet into the application. Sliding the riveter nosepiece firmly and squarely against the rivet head and squeeze the handles to install the rivet. On longer grip rivets, additional strokes will be required. CHERRYLOCK 'A' RIVET INSTALLATION TOOLING G0 Hand Riveter G750A HAND RIVETER National Stock Number The H055 series CherryLOCK A pulling heads can be attached to the G750A by utilizing the 750A-117 adapter. The H6 Right Angle Head can be attached to the G750A by use of the 750A-0 adapter. The Cherry G750A hand hydraulic riveting tool provides the versatility of a pneumatic-hydraulic riveter but with the lightweight high pull strength ratio desirability no found in other hand riveters. The Cherry G750A has a unique 2-stage hydraulic power cylinder that provides the user with the ease of puling the handle without the strain normally endured to install a high strength fastener. The patentable 2-stage power feature allows the user to squeeze the handle through the increase power requirement, without feeling the need to squeeze harder to install the fastener. The G750A hand riveter can install a variety of blind fastener styles, diameters, head configurations and material combinations. G750A Hand Riveter
11 H55 PULLING HEAD FOR CHERRYLOCK A RIVETS National Stock Numbers: H H H H55 STEM THROUGH FEED The H55 Series pulling heads fit directly on the G701A, G70B, G76A and G77 riveters. The heads in this series are capable of installing /2", 1/", 5/2" and /16" diameter rivets in all materials and head styles and grip lengths. Stems feed through the pulling head and are ejected out the back of the tool. Please refer to the individual tool specification for capacity. CHERRYLOCK 'A' RIVET /" (1.05 mm) 2 /" (60.25 mm) H55 Straight Pulling Head TOOLING H055 PULLING HEAD FOR CHERRYLOCK A RIVETS National Stock Numbers: H H H H055 STEM SIDE EJECTION H055 series pulling heads are available for installation of /2", 1/", 5/2" and /16" diameter locked spindle CherryLOCK A code rivets in all materials, head styles and grip lengths. Stems are ejected from the side of the pulling head. Please refer to the CherryLOCK A rivet tool selection chart on page 6 for possible tool combinations. 5/" (15. mm) /16" (106. mm) H055 Pulling Head H6-,, 5, 6 RIGHT ANGLE PULLING HEADS The H6 series right angle pulling heads fit directly on the G701A, G70B, G76A and G77 power riveters to install CherryLOCK A brand rivets in /2", 1/", 5/2" and /16" diameters in all materials, head styles and up to -0 grip length. NOTE: For 1/" diameter rivets, use the 0- pulling head. See tooling chart on page 6 for possible tool combinations. 2 1/" mm) /" (.5 mm) 5 7/16" (1.1 mm) H6 Right Angle Pulling Head
12 SPS Fastener Division, a PCC Company 122 East Warner Avenue, Santa Ana, CA Cherry Aerospace Suppliers Federal I.D. Code 1115 CA-102, Rev. A, Date: April 27, 2007, DCR
CHERRY SST TM. Aerospace Fasteners BLIND RIVET SYSTEM U.S. PATENT NO. 4,012,984 5,052,870 5,056,973
CHERRY SST TM BLIND RIVET SYSTEM U.S. PATENT NO. 4,012,984 5,052,870 5,056,973 Aerospace Fasteners THE SST TM BLIND RIVET SYSTEM INDEX SST TM Blind Rivet Features and Benefits...1 SST TM Blind Rivet InstaIIation...
More informationFASTENING SYSTEMS FOR AEROSPACE TOOL CATALOG
FASTENING SYSTEMS FOR AEROSPACE TOOL CATALOG Introduction How to use this catalog/tool Selection Guide...............................................3 Ergonomic Tool Selection Guide.........................................................4
More informationCHERRYMAX RIVET LIMITED WARRANTY NOTE ATTENTION:
CHERRYMAX RIVET CHERRYMAX RIVET LIMITED WARRANTY Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices
More informationFASTENING SYSTEMS FOR AEROSPACE TOOL CATALOG
FASTENING SYSTEMS FOR AEROSPACE TOOL CATALOG TABLE OF CONTENTS INTRODUCTION How to use this catalog/ Selection Guide...1 Ergonomic Selection Guide...2 SECTION 1 SINGLE ACTION RIVETERS FOR INSTALLING BLIND
More informationCHERRYMAX PROCESS MANUAL
CHERRYMAX PROCESS MANUAL RAD MAX.010 ALUM.020 MONEL SPS Fastener Division, a PCC Company CONTENTS Product Description... 2 CherryMAX Rivet Features... 2 CherryMAX Rivet Benefits... 2 Rivet Availability...
More informationDual Lock Reclosable Fasteners - Piece Parts
Dual Lock Reclosable Fasteners - Piece Parts Technical Data Sheet April 2015 General Description 3M Dual Lock Reclosable Fasteners are positive-locking, blind fasteners designed for attaching automotive
More informationOne Revolution Tube Cutter
One Revolution Tube Cutter Series 9060 Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com Table Of Contents Introduction...
More informationSECTION 3. BOLTS. bolt is a standard AN-type or a special-purpose bolt, and sometimes include the manufacturer.
9/8/98 AC 43.13-1B SECTION 3. BOLTS 7-34. GENERAL. Hardware is the term used to describe the various types of fasteners and small items used to assemble and repair aircraft structures and components. Only
More informationUser Instruction Manual Model# RK21 RK21-M
User Instruction Manual Model# RK21 RK21-M FOR SALES, SERVICE OR TECH SUPPORT CALL: 1800-BUY-RIVET or 1-800-289-7483 WWW.RIVET.COM CONTENTS Safety Page 3 Specifications Page 3 Jaw Maintenance and Replacement
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationCRD 410 MANUAL FITTING INSERTER
CRD 410 MANUAL FITTING INSERTER OPERATIONS MANUAL VERSION 1.2 LAST EDITED 05.01.2018 cleanroomdevices.com 1 Table of Contents Title Page 1 Table of Contents 2 1.0 General Product & Safety Information...3
More informationMaxLite LED Self-Driven LiteBars
Accessories Length: 4, 12, 40 Connector Box Straight Joiner Wire Joiner Mounting Clip Distribution Box Left Joiner Wire Joiner with Plug length: 40 Magnet Bracket Right Joiner End Cap Rotation Bracket
More informationSupport@Powrkraft.com 8ga. @ 0ft, 6ga. @ 50ft, ga @ 00ft, 0ga @ 00ft 3-6 Model Number Motor Diameter* 65556 500W 0 Volt 0 / Most Wood 0 4 ton 30 PSI 3.7 qt. 37 0 97 lb. 6 0W (-3 ISO Viscosity) Hydraulic
More informationHuckLok. Blind Rivets. Double-locking, wide-grip fasteners for superior strength in a broad variety of applications
HuckLok Blind Rivets Double-locking, wide-grip fasteners for superior strength in a broad variety of applications HuckLok A structural bulbing fastener ideal for joining a broad range of materials with
More informationPIN Diode Chips Supplied on Film Frame
DATA SHEET PIN Diode Chips Supplied on Film Frame Applications Switches Attenuators Features Preferred device for module applications PIN diodes supplied are 00% tested, saw cut, and mounted on film frame
More informationSeries 500. Owner s Manual. Analog Transmitters by Data Industrial. Data Industrial. Data Industrial 2/95 PN 72806
Series 500 Analog Transmitters by Data Industrial Data Industrial Owner s Manual Data Industrial 2/95 PN 72806 Table of Contents Introduction... 1 4-20 ma Loop Supply Requirements... 2 Installation...
More informationS T U D S & Revised 406
C O N C E A L E D - H E A D S E L F - C L I N C H I N G S T U D S & S TA N D O F F S Revised 406 PEM CONCEALED-HEAD STUDS* AND STANDOFFS These studs and standoffs ensure permanent mounting in metal sheets
More informationTension Control Clutch Model TCC-7
AIR CHAMP PRODUCTS User Manual Tension Control Clutch Model TCC-7 (i) FORM NO. L-20176-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained
More informationTerraBrute CR (4-12 ) Pipe Installation Guide
1.0 Introduction TerraBrute CR is an integral-bell restrained-joint PVC pipe that meets the performance requirements of AWWA C900 (1). It has a slight modification that allows the joints to be locked for
More informationModel 3110B Biconical Antenna
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Archived 3/18/10 Model 3110B Biconical Antenna MANUAL EMC TEST SYSTEMS, L.P. MARCH 2002 EMC Test Systems, L.P. reserves
More informationInstallation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
More information00108/00110 INSTRUCTION MANUAL
00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications
More informationALLIGATOR All-Purpose Anchors
ALLIGATOR All-Purpose s Description ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors... but also hold securely when they encounter an unexpected cavity, such as in
More information1.0 Tool Components and Operation Instructions
DBS-2200 MANUAL BANDING TOOL FOR 1/8 STAMPED BUCKLE BANDS DATASHEET SEE PAGE 18 FOR IMPORTANT INFORMATION CONCERNING LIMITED WARRANTY AND LIMITATION OF LIABILITY. INTRODUCTION The Daniels DBS-2200 (M81306/1B)
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 #4 BENDER BREAKDOWN AND PARTS LIST PG. 4-6 QUIK-LOK BREAKDOWN
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 SET-UP PROCEDURE PG. 4 REMOVING
More informationMark IV TM Structural Panel Fasteners
Mark IV TM Structural Panel Fasteners Design and Features The Flat Beam Lock design provides excellent resistance to vibration-induced loosening, and has a cycle life of up to 1,500 seated cycles. The
More informationautomatic embosser & die cutter USER MANUAL
TM TM automatic embosser & die cutter USER MANUAL CREATE A BEAUTIFUL LIFE IN THE BOX Cut n Boss machine (7) Embossing Folders (12) Cutting Dies Platforms (2) (1) Platform B (1) Platform D Magnetic Shim
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More information3M Dual Lock Reclosable Fastener SJ3550
ASK A 3M EXPERT June, 2014 3M Dual Lock Reclosable Fastener SJ3550 Product Description 3M Dual Lock Reclosable Fasteners are positive locking, hidden fasteners designed for use in a variety of attachment
More informationMagna-Lok The World s Most Reliable Blind Fastening System
Magna-Lok The World s Most Reliable Blind Fastening System Solid Circle Lock Fast Installation Vibration Resistant 3/16", 1/4", 3/8", 1/2" Huck Magna-Lok For a Variety of Applications, Nothing Else Will
More informationHuck BOM. The highest strength blind fasteners in the world. Vibration resistant Easy to install Mechanically locked 3/16"-3/4"
Huck BOM The highest strength blind fasteners in the world. Vibration resistant Easy to install Mechanically locked 3/16"-3/4" 1 The Huck BOM The highest strength blind oversize fasteners in the world.
More informationSheet Metal Design Guidelines
Sheet Metal Design Guidelines Issue XIV, Aug 2015 2 Copyright Notice Geometric Limited. All rights reserved. No part of this document (whether in hardcopy or electronic form) may be reproduced, stored
More informationOWNER S MANUAL AMERICA S PREMIER XXL SUPER RACKS XXL-2960 SUPER RACK/SMITH MACHINE XXL-2960 L 112 W 86 H 100 XXL-2960 / XXL-912 L 179 W 91 H 100
OWNER S MANUAL XXL-60 L 11 W 6 H 100 XXL-60 SUPER RACK/SMITH MACHINE XXL-60 / XXL-1 L 1 W 1 H 100 AMERICA S PREMIER XXL SUPER RACKS XXL-60 Rev0 Revision Date -1-07 COLOR CHART GRAY= SUB-ASSEMBLY PARTS
More informationHuck BOM The Highest Strength Blind Fasteners in the World
Huck BOM The Highest Strength Blind Fasteners in the World Vibration Resistant Easy to Install Mechanically Locked 3/16" 3/4" The Huck BOM The Highest Strength Blind Oversize Fasteners in the World BOM
More informationMS23SL Magnetic Linear Sensor With Smart Limit Switches
MS23SL Magnetic Linear Sensor With Smart Limit Switches 2 micron Quadrature Output 0.4 micron Serial Output 0.4 micron PWM Output Technical Reference Guide PCB Rev 1.0 www.soc-robotics.com Copyright 2013.
More informationThe Saddle Rack. For Power And Communication Cables
The Saddle Rack For Power And Communication Cables Underground Devices SADDLE RACKS: Low Cost, But Tough and Non-Corrosive For Temporary Support or Permanent Installation For Use in Manholes, Handholes,
More information3M Abrasive Systems. Sanding made simple.
3M Abrasive Systems Sanding made simple. Introducing Sanding Made Simple. For more than 100 years, 3M Science has provided technologies designed to make your life easier and improve the world one finish
More information3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
More informationQuarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
More informationProduct #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
More informationCATALOG FOR WOODCO USA Brand 150 TON SPIDER. API ROTARY TAPER TRADEMARK WOODCO BUY THE BRAND REG. U.S. PATENT OFFICE MANUFACTURER
CATALOG FOR WOODCO USA Brand 150 TON SPIDER. API ROTARY TAPER Hinged Casing and Tubing Spider, includes an assembly drawing, dimensions, weight and parts list. TRADEMARK WOODCO USA BUY THE BRAND REG. U.S.
More informationThe SN BobT EP ail Product Range Next step in LockBolt Evolution
The BobTail SNEP Product Next step Range in LockBolt Evolution BobTail Next step in LockBolt Evolution The uck BobTail system includes LockBolts and installation tooling that will deliver you benefits
More informationHARDINGE Installation booklet For: Dead-Length Collet Adaptation Chucks Stationary Collet
HARDINGE Installation booklet For: Dead-Length Collet Adaptation Chucks Stationary Collet Read the enclosed instructions and recommendations before any installations CONTENTS Dead-Length Collet Adaptation
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation
More informationMagna-Lok The World s Most Reliable Blind Fastening System
Magna-Lok The World s Most Reliable Blind Fastening System Solid circle lock Fast installation Vibration resistant 3/16"-1/2" Huck Magna-Lok Magna-Lok. For a variety of applications, nothing else will
More informationElco Construction Products 1301 Kerr Drive Decorah, IA fax:
Technical Manual 2010 HangerMate anchors were designed to speed installation of fire sprinkler, HVAC, refrigeration, general piping, and electrical systems. They can also be used to install strut channels,
More informationParts List 4 MODEL T-18 and T-27 Mark II Turbo-Meters
MP-1070A Rev. 9 Invensys Energy Metering 80 Liberty Boulevard DuBois, PA 15801 Telephone (814) 371-8000 FAX (814) 375-8460 Parts List 4 Model T-18 and T-27 Mark II Turbo-Meter Parts List 4 MODEL T-18 and
More informationHuck BOM The highest strength blind fasteners in the world
Huck BOM The highest strength blind fasteners in the world Vibration resistant Easy to install Mechanically locked 3/16"-3/4" The Huck BOM The highest strength blind oversize fasteners in the world. BOM
More information9 QUICK RELEASE WOODWORKING VISE
9 QUICK RELEASE WOODWORKING VISE 94386 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA
More informationQuestions? Call Toll-Free
List Instruction Manual & Parts IMPORTANT! PLEASE READ INSTRUCTIONS CAREFULLY Failure to install and operate MAC products according to our specified instructions could result in equipment malfunction or
More informationo-ring grease can be used to hold the o-ring in the groove during installation.
42G1215A-XT-1-2 and 42G1215A-XT-1-3 ANTENNA GUIDE OM-20000154 Rev 1 December 2013 The 42G1215A-XT-1-3 and 42G1215A-XT-1-2 are active antennas designed to operate at the GPS L1 and L2 frequencies, 1575.42
More informationThixotropic Slurry Cup Instruction Manual
Thixotropic Slurry Cup Instruction Manual Manual No. D00900347, Revision B Instrument No. 100072538 2015 Fann Instrument Company Houston, Texas, USA All rights reserved. No part of this work covered by
More informationQR Structural Panel Fasteners
QR Structural Panel Fasteners The QR Strucutral Panel Fastener qualifies to MIL-F-22978 and meets MS17731 and MS17732. The QR fastening system is lightweight, has a small envelope and is fast operating.
More informationOperating and Safety Instructions for the Mark V Fastener Attaching Tool #11500 and #11501
Swiftach Systems 7-60-5550-01 REV3 ENGLISH www.rbis.averydennison.com U.S. Patent 7,472,813, and other Patent(s) Pending Operating and Safety Instructions for the Mark V Fastener Attaching Tool #11500
More informationPARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS
PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & 6500 3 WHEEL SPRAYERS MUD HOG MODEL NUMBERS JD6500-13.5-16.1 I3 Tire (Export) JD65003-12.5L-15 I3 Tire TUTHILL Transport Technologies Brookston Indiana
More informationRIVNUT. The Original Blind Rivet Nut. Tel Fax
The Original Blind Rivet Nut DISTRIBUTED BY: AIM Industries, Inc. 6216 Transit Road Depew, NY 14043 Tel. 716-681-6196 Fax. 716-681-1610 aimrivnut@aol.com www.aimfasteners.com PLUSNUT A commitment to quality
More informationModels Tension/Compression Pancake Load Cell Model 3174 with tension base DESCRIPTION FEATURES
Models 3174-3176 Model 3174 Model 3174 with tension base DESCRIPTION Models 3174, 3175, and 3176 are fatigue-resistant, low-profile tension and compression load cells that are well suited to materials
More informationGT Series Grooving Tool
GT Series Grooving Tool Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com TABLE OF CONTENTS Introduction... 4 Safety
More informationINSTALLATION INSTRUCTIONS FOR BALCO, INC. TWO COMPONENT STAIR NOSINGS
2626 South Sheridan PO Box 17249 Wichita, Kansas 67217 Phone: (316) 945-9328 Fax: (316) 945-0789 INSTALLATION INSTRUCTIONS FOR BALCO, INC. TWO COMPONENT STAIR NOSINGS 2008, Balco, Inc. 05/14/08 INSTALLATION
More informationSolarMount (E)volution
SolarMount (E)volution SOLARMOUNT (E)VOLUTION: THE BEST JUST GOT BETTER. Engineering, Excellence, and Ease. Performance Engineered for versatility and reduced installation time, SolarMount (E)volution
More informationHydraulic Renovator 20
Model #: 704591 Starting Date: 2/2005 8HP Kawasaki Engine Hydraulic Renovator 20 ILLUSTRATED PARTS LIST 2 Handle Assembly - Fig. 1 4 7 19 17 9 1 56 58 1 12 14 55 5 16 21 7 8 27 17 0 26 24 6 2 52 4 15 11
More informationFlat Sample Holder Part Number
Flat Sample Holder Part Number 990-00403 (Patent Pending) Operator s Manual Copyright 2016 Gamry Instruments, Inc. April 8, 2016 988-00043 Rev. 1 If You Have Problems Please visit our service and support
More informationWarranty Terms & Conditions
Warranty Terms & Conditions Is my guitar under warranty? How long, what specific parts? Ibanez Electric Guitars and Basses Limited Warranty Ibanez Electric Guitars and Basses sold in the United States
More information3M Dual Lock Reclosable Fastener
1-800-773-0062 www.marianinc.com 3 Dual Lock Reclosable Fasteners SJ3550CF (Type 250) SJ3551CF(Type 400) SJ3552CF(Type 170) Dual Lock Reclosable Fastener Black with a clear acrylic adhesive Product Information
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More informationGrounding and Utility Enclosure
Grounding and Utility Enclosure DXE-UE-2P DXE-UE-2P-INS Rev 1f DX Engineering 2017 1200 Southeast Ave. - Tallmadge, OH 44278 USA Phone: (800) 777-0703 Tech Support and International: (330) 572-3200 Fax:
More informationMANUAL METAL SHRINKER/STRETCHER
MANUAL METAL SHRINKER/STRETCHER Model 95062 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,
More informationTilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040
Tilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040 20-40 66 lbs. Supports VESA sizes up to: 200x200 For technical assistance or troubleshooting please call 1-855-994-2825 or visit
More informationThank you for choosing a Yost Vise. For future reference please record the following:
Thank you for choosing a Yost Vise. For future reference please record the following: Model #: Purchase Date: Supplier: 34C I n s p e c t i o n a n d A c c e p t a n c e Claims for damage, shortage or
More informationVelocity Measuring System PARTS MANUAL
Velocity Measuring System 00 Vehicle Service Group PARTS INFORMATION If it becomes necessary to order replacement parts or accessories for your Velocity Measuring System, or contact a service representative,
More informationDistribution Amplifiers 1
Distribution Amplifiers 1-30dB PUT 49-750 MHz 43 db GA POWER DOUBLED P/N: 1002705 REVERSE GA M MAX DESCRIPTION The R.L. DRAKE models DA8642, DA8632,, and DA7533, are broadband distribution amplifiers designed
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationGeneral Specification
General Specification CODE IDENT NO. 23835 SPEC NO. ES504255, REV I ISSUE DATE 2/9/99 SUPERSEDING ES504255 H DATED 6 JANUARY 1999 TORQUE REQUIREMENTS MECHANICAL THREADED FASTENERS (SPACECRAFT STRUCTURE
More informationHARDINGE Installation booklet For:
HARDINGE Installation booklet For: L Flange Nose Dead-Length Collet Adaptation Chucks Draw Collet Read the enclosed instructions and recommendations before any installations WARRANTY & RETURN PROCEDURES
More informationShrinker and stretcher
Shrinker and stretcher Model 96465 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein 3491 Mission Oaks Blvd, Camarillo,
More informationSpecifications. Important Safety Information
Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.
More informationorientation Conergy SunTop Instructions for professional installation
On-roof Framed modules Portrait orientation Landscape Three-tab Shingle Plain tile Slate Double Roman tile Metal roof Material warranty orientation Conergy SunTop Instructions for professional installation
More informationMILITARY SPECIFICATION SHEET SCREW, CAP, SOCKET HEAD- HEXAGON, CORROSION RESISTANT STEEL, UNC-3A
INCH-POUND MS16995H 25 April 1997 SUPERSEDING MS16995G 27 June 1995 MILITARY SPECIFICATION SHEET SCREW, CAP, SOCKET HEAD- HEXAGON, CORROSION RESISTANT STEEL, UNC-3A This specification is approved for use
More informationSMV2025 Hyperabrupt Tuning Varactors Supplied on Film Frame and Waffle Packs
PRELIMINARY DATA SHEET SMV2025 Hyperabrupt Tuning Varactors Supplied on Film Frame and Waffle Packs Applications Wide-bandwidth and low phase-noise VCOs Wide-range, voltage-tuned phase shifters and filters
More informationCaptive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
More informationINSTALLATION INSTRUCTIONS FOR BALCO, INC. TWO COMPONENT STAIR NOSINGS
2626 South Sheridan PO Box 17249 Wichita, Kansas 67217 Phone: (316) 945-9328 Fax: (316) 945-0789 INSTALLATION INSTRUCTIONS FOR BALCO, INC. TWO COMPONENT STAIR NOSINGS 2015, Balco, Inc. 11/20/15 Document
More informationCutters. Section. HUBBELL / CHANCE CENTRALIA, MISSOURI Printed in USA FEBRUARY 2009
Cutters Section 2151 2150 Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from
More informationMUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3
operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine General Information 2 DH-5/EH-5 Drilling EH-5 Drilling Machine General Information 3 Operating Instructions 4-5 DH-5
More informationGrade 5 dual-hardened concrete/masonry screw anchoring system
Innovative Fastening Technology NEW! #14 Diameter Grade 5 dual-hardened concrete/masonry screw anchoring system Virtually immune to embrittlement failure! 1 The #14 Conflex has a more robust cross-sectional
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More information3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
More informationModel DB Disc Caliper Brake AIR CHAMP PRODUCTS. User Manual. (i) MTY (81)
DIST. AUTORIZADO MEX (55) 53 63 3 3 QRO (44) 95 7 60 MTY (8) 83 54 0 8 AIR CHAMP PRODUCTS User Manual Model DB Disc Caliper Brake (i) FORM NO. L-00-G-030 MEX (55) 53 63 3 3 MTY (8) 83 54 0 8 DIST. AUTORIZADO
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationFLARELESS SEPARABLE FITTING
FLARELESS SEPARABLE FITTING DESIGN CONCEPT: The concept of Flareless provides positive sealing and a high degree of sealing reliability for repeated usage. The configuration of Flareless joint consists
More informationEddie-Bolt 2 Fastening System PROCESS MANUAL
Eddie-Bolt 2 Fastening System PROCESS MANUAL Page Introduction 2 Anatomy of Eddie-Bolt 2 3 Part Number System 4 Recommended Hole Diameters 12 Hole Preparation 13 Grip Gaging 15 Installation Sequence 17
More informationYour Performance Partner
Assembly Instructions Attic Storage System Your Performance Partner CONTENTS Safety Precautions.................................. 2 Warranty.......................................... 2 Important User Information............................
More informationCaliper Brake WINDCAL 90
Caliper Brake WINDCAL 90 (i) FORM NO. L-20233-A-0601 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without
More informationMATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
More informationInstallation & Assembly: Suspended Ceiling Kit
Installation & ssembly: Suspended Ceiling Kit Model: CMJ450 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500
More informationAdapters Between Series
Adapter Finder Adapters in this chart and on the following pages are listed in alphabetic order to find an adapter that connects a TNC plug to a BNC jack, look under BNC plug to TNC jack. Left end: Right
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationOwner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.
Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.
More informationModel 3101, 3102 and 3103 Conical Log-Spiral Antennas
Model 3101, 3102 and 3103 Conical Log-Spiral Antennas MANUAL EMC TEST SYSTEMS, L.P. SEPTEMBER 2002 EMC Test Systems, L.P. reserves the right to make changes to any products herein to improve functioning,
More information