Electric tools. Woodworking. Garden equipment

Transcription

1 Electric tools Woodworking Garden equipment

2 SWISSM plug and work

3 Table of contents - Tools and Garden Equipment Drills & hammer drills 4-6 Cordless screwdrivers 6-11 Angle grinders & grinders Hand-held circular saws & jigsaws Electric planes & cutters Solder guns & hot glue guns 23 Machine sets Double grinders 26 Tile and stone cutting machines Drag crosscut and mitre saws Bench circular saws Band saws & metal crosscut saws Column drills 37 Compressors Electric shielding gas welding sets Generators Cable hoists 48 Pressure washers Wet & dry vacuum cleaners Lawn trimmers 54 Motor scythes & motor trimmers 55 Lawnmowers & cultivators 56 Cordless lawn care tools 57 Hedge cutters 58 Chainsaws Domestic waterworks 61 Garden pumps 62 Dirty water pumps 63 Leaf blowers 64 Petrol hoes 65 Garden shredders & garden sprayers 66

4 Drilling, hammer drilling Hammer drills Powerful, ergonomically balanced hammer drills with keyless chucks. Can be switched from drilling to hammer drilling and vice versa. Impact-resistant plastic casing, electronic drilling speed control. Additional power handle with integral depth stop for easy, effective working. ED-E Hammer drill Drilling capacity: 500 W Wood 20 mm Concrete 13 mm Steel 10 mm 0-2,600 rpm Infinite electronic speed control Drilling and hammer drilling Keyless chuck: 2-13 mm Additional handle with depth stop Article number: EAN-Code: ED-E 850 Impact drill Drilling capacity: 850 W Steel 13 mm 0-2,900 rpm Keyless chuck 0-13 mm Auxiliary handle Deep ruler Article number: ED-E Professional hammer drill Drilling capacity: Electronic 2-speed 1050 W mm 1st speed: 0-1,000 rpm 2nd speed: 0-3,000 rpm Electronic reversing facility 2-speed Hammer drilling Second handle with depth stop Keyless chuck Article number: EAN-Code:

5 Drilling, hammer drilling, chiselling Hammer drills Powerful, comfortable hammer drill with SDS-Plus mounting for drilling, hammer drilling and chiselling. Can be switched over: Hammer stop for starting holes, rotation stop for chiselling. Ideal for renovation and demolition work. EHD Set Hammer drill Stroke speed: Drilling capacity: Hammer force: 850 W 750 rpm 2,920 rpm 28 mm concrete/steel 3.5 J Sturdy metal hammer unit SDS-Plus mounting Additional handle with depth stop Hammer stop for starting holes Rotation stop for chiselling work Drill bits: 8, 10 and 12 mm 1x pointed chisel 1x flat chisel Dust cap Case Article number: EAN-Code: Optional accessories: SDS -Plus-Hammer drill set, (Ø 5, 6 x 100; Ø 8, 10, 12 x 150; Ø 14, 16 x 200; Ø 18, 22 x 350), Article number: SDS-Plus-Chisel set (2 x pointed chisel, 1 x flat chisel), Article number: EHD Hammer drill in case 230 V ~ W 900 rpm Stroke speed: 4,500 rpm Drilling capacity: 260 mm concrete /steel Hammer force: 4.0 J SDS-Plus mounting Additional handle with depth stop Hammer stop for starting holes Rotation stop for chiselling Dust cap in PVC case Article number: EAN-Code: Optional accessories: SDS-Plus drill bit set (diameter 5/6 x 100; 8, 10, 12 x 150; 14,16 x 200; 18,22 x 350), Article number: SDS-Plus Chisel set (2x pointed chisels, 1x flat chisel), Article number: EHD Hammer drill in case 230 V ~ 50 1,400 W 680 rpm Stroke speed: 3,600 rpm Drilling capacity: 260 mm concrete/steel Hammer force: 4.2 J SDS-Plus mounting Additional handle with depth stop Hammer stop for starting holes Rotation stop for chiselling Drill bit diameters 8/10/ mm 1x pointed chisel 1x flat chisel Dust cap in PVC case Article number: EAN-Code: Optional accessories: SDS-Plus drill bit set (diameter 5/6 x 100; 8,10,12 x 150; 14,16 x 200; 18,22 x 350), Article number: SDS-Plus chisel set (2x pointed chisels, 1x flat chisel), Article number:

6 Drilling, hammer drilling, screwing Hammer drill and cordless screwdrivers Powerful and ergonomically balanced hammer drill with SDS-Plus mounting for drilling, hammer drilling and demolition work. Can be switched over: Hammer stop for starting holes, rotation stop for chiselling. Powerful and ergonomically balanced cordless screwdriver for working at home, on a site or in the garden. For fast screwing and drilling without requiring a mains socket. With electronic speed control, battery charger and lots of accessories. EHD 800 Hammer drill Idling speed: Stroke speed: Drilling capacity in concrete: Hammer force: 800 W rpm 0-3,900 rpm 26 mm diameter 3 J 3 functions: Drilling, hammer drilling, chiselling SDS-Plus mounting Additional handle Depth stop Electronic control Plastic case Drill bits: 8/10/12 mm Pointed and flat chisels Article number: EAN-Code: EHD 1210 Hammer Drill Product Description Specification Rated Voltage Rated Frequency Rated Power Rated Speed Max Drilling Diame 1200w Hammer Drill 230V 50HZ 1200W 900r/min 30mm Article number: EAN-Code: EHD 1010 Hammer Drill Product Description Specification Rated Voltage Rated Frequency Rated Power Rated Speed Max Drilling Diame 900w Hammer Drill 230V 50HZ 900W 850r/min 26mm Article number: EAN-Code: 6

7 Drilling, screwing Cordless screwdrivers and drills Powerful and ergonomically balanced cordless screwdriver with double power for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. PIC charge control in the charging station. With electronic speed control, battery charger and lots of accessories. CD 18-PROMO 2-speed cordless screwdriver Keyless chuck: Drilling capacity: Charging time: 18 V 1.3 Ah Ni-Cd battery rpm 0-1,050 rpm 1-10 mm Wood 10 mm Metal 8 mm 1 hour T-handle cordless screwdriver with electronic speed control 2 NC battery, 18 V 16 torque settings Keyless chuck 10 mm High speed charger 1 hour including 16-piece set in plastic case Article number: EAN-Code: CD 18-2 SI Set 2-speed cordless screwdriver Keyless chuck: Drilling capacity: Charging time: Gearbox: 18 V 1.2 Ah Ni-Cd battery rpm 1-10 mm Wood 10 mm Metal 8 mm 1 hour 2-speed gearbox 2-speed cordless drill and screwdriver T-handle cordless screwdriver with electronic speed control 2 NC battery, 18V 16 torque settings Keyless chuck 10 mm including 16-piece set in plastic case Battery charger: 1 hour Article number: EAN-Code: CD 24-2 SI Set 2-speed cordless drill/hammer drill/screwdriver Keyless chuck: Drilling capacity: Charging time: Gearbox: 24 V 1.2 Ah Ni-Cd battery rpm 1st gear 0-1,400 rpm 2nd gear Reversing facility 13 mm Wood 15 mm Metal 10 mm 1 hour 2-speed gearbox 2-speed hammer drill D-handle cordless screwdriver with electronic speed control Metal gearbox Hammer drill function including two 24 V, 1.2 Ah batteries 17 torque settings including 16-piece set in plastic case Batter charger: 1 hour charger Article number: EAN-Code:

8 Drilling, screwing Cordless screwdrivers and drills Powerful and ergonomically balanced cordless screwdriver for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. Charge control in the charging station With electronic speed control, battery charger and lots of accessories. AK 14.4 Cordless screwdriver Keyless chuck: Drilling capacity: Charging time: 14.4 V 1.2 Ah Ni-Cd battery rpm 1-10 mm Wood 10 mm Metal 8 mm 3-5 hours T-handle cordless screwdriver with electronic speed control 16 torque settings Battery charger: 3-5 hours Article number: EAN-Code: AK 18 Set Cordless screwdriver Keyless chuck: Drilling capacity: Charging time: 18 V 1.2 Ah Ni-Cd battery rpm 1-10 mm Wood 10 mm Metal 8 mm 3-5 h T-handle cordless screwdriver with electronic speed control 1 NC battery, 18V 16 torque settings Keyless chuck 10 mm Presentation box Battery charger: 3-5 hours including 16-piece set in plastic case Article number: EAN-Code: AK 18-2 Set Cordless screwdriver Keyless chuck: Drilling capacity: Charging time: 18 V 1.2A h Ni-Cd battery rpm 1-10 mm Wood 10 mm Metal 8 mm 3-5 hours T-handle cordless screwdriver with electronic speed control Including two 18 V batteries 16 torque settings Battery charger: 3-5 hours including 16-piece set in plastic case Keyless chuck 10 mm Article number: EAN-Code:

9 Drilling, screwing Cordless screwdrivers and drills with lithium-ion battery Powerful and ergonomically balanced cordless screwdriver for work at home, on site or in a workshop. For fast screwing and drilling without requiring a mains socket. Durable lithiumion battery with no memory effect. Charge control in the charging station. With electronic speed control, battery charger and lots of accessories. AK 14.4 Li Cordless screwdriver Keyless chuck: Drilling capacity: Charging time: 14.4 V 1.3 Ah Lithium battery rpm 1-10 mm Wood 10 mm Metal 8 mm 5-6 hours T-handle cordless screwdriver with electronic speed control 16 torque settings Battery charger: 5-6 hours including 16-piece set in plastic case Lithium-ion battery No memory effect Article number: EAN-Code: AK 18 Li Set Cordless screwdriver Keyless chuck: Drilling capacity: Charging time: 18 V 1.3 Ah Lithium battery rpm 1-10 mm Wood 10 mm Metal 8 mm 3-5 h T-handle cordless screwdriver with electronic speed control 16 torque settings Battery charger: 5-6 hours including 16-piece set in plastic case Lithium-ion battery No memory effect Article number: EAN-Code:

10 Drilling, screwing Cordless screwdriver with toolbox charging station Small, handy cordless screwdriver for quick jobs at home. For fast screwing and drilling without requiring a mains socket. Combined battery charging station with bits, magnetic holder and drill bits. CD Li Set Quick Drill Cordless screwdriver with toolbox charging station Charger: Battery: Mounting: Charging time: 3.6 V-1.4 Ah 3-5 hour charger Lithium-Battery-300mA rpm 6.35 mm diameter 3-5 hours Charge status indicator Docking station including wall mounting Magnetic holders Including 45 different bits Article number: EAN-Code: CD 4.8 Set Quick Drill CD Li Gun cordless screwdriver / drill CD 4.8 Set Quick Drill CD Li 4.8 V-1.2 Ah 4.8 V-1.4 Ah Charger: 3-5 hour charger 3-5 h hour charger Idling speed: 150 rpm 150 rpm Battery Spannung: 6 V battery 6 V battery Charge current: 300 mah 300 mah Charger: Mounting: Ø 6.35 mm Ø 6.35 mm 3 drill bits 1 bit holder 2 long bits 18 bits LED charge status indicator Magnetic holders 230 V charger Article number: CD 4.8 Set EAN-Code: Article number: CD Set EAN-Code:

11 Drilling, screwing Cordless screwdriver with 120-piece tool set Powerful and ergonomically balanced cordless screwdriver for working at home, on a site or in the garden. Angled handle makes it particularly practical. For fast screwing and drilling without requiring a mains socket. Battery charger and lots of accessories. CD Set Cordless screwdriver Charger: Torque: 4.8 V 1.2 Ah 3-5 h charger 23 settings 120-piece accessory set Titanium-coated bits In a portable folding plastic case Article number: EAN-Code:

12 Grinding, cutting One-handed angle grinder Practical, powerful angle grinder for grinding, cutting, separating and polishing. A comfortable position can be found for all types of work thanks to the fact that the handle can be fitted on both sides. A flat head makes work in places with difficult access easier. The spindle lock allows the grinding discs to be changed quickly. AG Angle grinder Disque diameter: 500 W 11,000 rpm ø 115 mm Spindle lock Guide handle can be fitted on the right or left Safety hood Spindle thread M14 Article number: EAN-Code: AG Evolution Angle grinder Disque diameter: 800 W 11,000 rpm ø 125 mm Aluminum heading Metal transmission heading Spindle lock Addition handle on the right left screwable Article number: EAN-Code: AG Angle grinder Disque diameter: 900 W 11,000 rpm ø 125 mm Spindle lock Guide handle can be fitted on the right or left Safety hood Spindle thread M14 Article number: EAN-Code: All models without discs 12

13 Grinding, cutting Two-handed angle grinders Powerful angle grinder for grinding, cutting, separating and polishing. A comfortable position can be found for all types of work thanks to the fact that the handle can be fitted on three sides. A flat head makes work in places with difficult access easier. The spindle lock allows the grinding discs to be changed quickly. AG 1100 Evolution Angle grinder Disque diameter: 1100 W 11,000 rpm ø 125 mm Metal gearbox head Spindle lock 2-hand handle Guide handle can be mounted in 2 positions right, left Safety hood Spindle thread M14 Aluminium head Article number: EAN-Code: AG 2000 Eco Angle grinder Idling speed: Disque diameter: Soft Start 2,000 W 6,400 rpm ø 230 mm Metal gearbox head Spindle lock Guide handle can be mounted in 3 positions right, left or top Additional handle can be turned through 90 to the right and left Flange wrench Article number: EAN-Code: AG Evolution Angle grinder Disque diameter: 2200 W 6000 rpm ø 230 mm Soft start power limiter Metal gearbox head Spindle lock Swivelling handle (90 -rechts-links) addition handle (on the right-left above) Safety hood Spindle thread M14 Article number: EAN-Code: All models without discs 13

14 Grinding, smoothing Delta grinder for fine and coarse grinding work Battery and 220 V delta grinder for specialist work. For smoothing and grinding wooden surfaces, plastic or metal. An ergonomic handle position and vibration-free operation of the machines mean they do not cause fatigue. ADS 7.2 Volt- Li Lithium-ion battery delta sander Battery: Idling speed: Charging time: Charger: Abrasive paper: Lithium batteries 7.2 Volt 1,000 mah 10,000 rpm 3-5 hours 400 ma, 9 V 95 x 135 mm Including charging station Wall mounting for charging station LED charge status indicator 3 sheets of abrasive paper 1 x 120 grit 2 x 80 grit Article number: EAN-Code: OS 105 D Multi-grinder Oscillations: Abrading area: Abrasive paper size: 105 W 12,000 rpm 140 x 140 x 80 mm 140 x 140 x 80 mm Adapter for dust extraction Including 1 sheet of abrasive paper Article number: EAN-Code:

15 Grinding, smoothing Belt and orbital sanders For smoothing and grinding wood, plastic, metal or painted finishes. Ergonomic handles and vibration-free operation of the machines mean they do not cause fatigue and produce a clean result. OS 135 Orbital sander Oscillations: Abrading area: 135 W 10,000 rpm 185 x 90 mm Adapter for dust extraction Including 1 sheet of abrasive paper Article number: EAN-Code: OS Orbital sander Oscillations: Abrading area: Abrasive paper size: 300 W 12,000 rpm 225 x 115 mm 280 x 115 mm Aluminium sanding plate Soft handle Adapter for dust extraction Dust bag Including 1 sheet of abrasive paper Article number: EAN-Code: BS /1 Belt grinder Idling speed: Grinding belt size: 730 W 360 rpm 760 x 460 mm Second handle for working without fatigue Precise belt guide Integral dust extraction Dust bag 1 grinding belt Belt tensioning device Article number: EAN-Code: Optional accessories: Accessory set 2 x grinding belt k40 2 x grinding belt k80 2 x grinding belt k60 2 x grinding belt k100 Article number:

16 Grinding, polishing and engraving Grinding and engraving set with flexible shaft The multiple grinder with lots of accessories for grinding, drilling, cutting, polishing and engraving. The precise spindle guide and hardened collect chuck are ideal for producing clean work on wood, stone, glass and metal. The flexible shaft also allows very fine engraving and polishing work to be carried out. GES 135 Drill/Grinder Set Flexible shaft 135 W 10,000-35,000 rpm 40-piece accessory set for cutting, drilling, grinding, engraving, milling, polishing and cleaning Flexible shaft Telescoping stand BMC case Article number: EAN-Code:

17 SWISSM Woodworking Hand-held circular saw and jigsaw Electric plane and surfacing/thicknessing plane Moulding machines and masonry channel cutter Hot air guns and solder guns Tool sets

18 Sawing, cutting Hand-held circular saws with and without laser guide Lightweight, powerful and ergonomic circular saws with parallel stop, dust extraction and a base plate that can be adjusted to an angle of 45. The laser display on the CS L allows precise free-hand cutting. CS Promo Hand-held circular saw Cutting depth at 90 : Cutting depth at 45 : Saw blade: 1,200 W 4,500 rpm 65 mm mm ø 185 mm x 20 x 24 T Carbide metal saw blade, 185 mm Parallel stop Dust extraction Pivot-mounted bench: 45 Article number: EAN-Code: CS L CS L Professional hand-held circular saw with laser Cutting depth at 90 : Cutting depth at 45 : Carbide metal saw blade: Bench: 1,200 W / 1,400 W 4,500 rpm max. 66 mm mm ø 190 mm Can be adjusted to an angle of 45 Laser guide Carbide metal saw blade 190 mm / 24 T Parallel stop Socket wrench Dust extraction Pivot-mounted bench: 45 Article number: CS L EAN-Code: Article number: CS L EAN-Code: Figure: CS with laser 18

19 Sawing, cutting Commercial jigsaw set Universal saw Extensive commercial set with powerful, ergonomic jigsaw for universal use in the home and workshop. Universal saw, suitable for various materials such as wood, plastic or metal. For cutting wooden beams, boards and branches as well as copper pipes, etc. Ergonomic, simple electrical adjustment. Accessories: Stop angle Combination pliers 6 mm round file 7 mm firmer chisel 10 mm firmer chisel Straight slot screwdriver Philips screwdriver 3 m tape measure 3 joiner s pencils 70 Spax 3.0x30 mm 60 Spax 3.5x30 mm 40 Spax 4.0x30 mm 3 jigsaw blades for iron 7 jigsaw blade for wood 5 sheets of abrasive paper 2x60, 1x150, 2x320 EJS Set jigsaw in case set EJS jigsaw 450 W No. of strokes: 500-3,000 rpm Max. cutting depth: 55 mm Angled cuts: max. 45 Article number: EJS Set EAN-Code: Article number: EJS EAN-Code: Adjustable bench can be pivoted up to 45 to the left and right Saw blade roller guide Finger guard Integral adapter for dust extraction Case with accessories (EJS Set only) MRS Universal saw Idling speed: Cutting heigh: Stroke height: 850 W 500-2,600 rpm Wood max. 150 mm 30 mm Electronic control Soft handle SDS blade mounting Metal gearbox head + 1,150 mm saw blade for wood + 1,100 mm saw blade for metal Article number: EAN-Code: Optional accessories: Saw blade set 3 x wood, 2x metal Article number:

20 Sawing, cutting Jigsaws with and without laser guide Powerful, ergonomic electronic jigsaw with a pendulum action and adjustable angle base for universal use. The EJS L Set includes a precise laser cutting indicator that allows precise free-hand cutting. EJS Evolution Professional pendulum-action jigsaw 610 W Stroke rate min Cutting depth: Wood max.60 mm Metal max.8 mm Angled cuts: Max 45 Weight: 2,3kg packing Stroke rate electronic control With electronics and pendulum stroke Adjustable desk to 45, on the left and on the right Saw blade - roller apron Finger protection Integrated adapter for dust extraction 1 saw blade Article number: EAN-Code: EJS 750 Evolution Jigsaw No. of strokes: Cutting depth: Angled cuts: Max 45 pendulum stroke: 0, 1, 2, W 0-3,000 rpm Wood/iron: 80/8mm Plastic max. 60 mm Metal max. 8 mm Electronic regulation SDS page accommodation Aluminum desk with parallel guide stop Pendulum stroke control quadruple Soft grasp 2 saw blades for wood 1 universal saw blade 1 Allen key Article number: EAN-Code:

21 Surfacing planes, thicknessing planes Electric plane Surfacing/Thicknessing plane The ergonomic and lightweight electric planes are notable for their smooth operation. The adjustable chip thickness and interchangeable carbide metal blades make for professional joinery results. Compact, universal surfacing and thicknessing plane for hobby and workshop. The stable, torsion-free metal machine casing provides great strength and almost zero vibration operations. The machine can be converted from a surfacing to a thicknessing plane without needing any tools. Durable universal motor with sturdy belt drive. EP Electric plane Chip depths: Planing width: 650 W 16,000 rpm 0-2 mm 82 mm Carbide metal blade Infinitely adjustable chip thickness 0-2 mm Socket wrench Parallel stop Spare drive belt Article number: EAN-Code: EP Electric plane Chip depths: Planing width: 710 W 16,400 rpm 0-3 mm 82 mm Carbide metal blade Infinitely adjustable chip thickness 0-3 mm Parallel stop Socket wrench Drive belt Article number: EAN-Code: EP Surfacing/Thicknessing plane Idling speed- Max. planing width: Max. surfacing height: Max. clearance heigh: 230 Volt 1,500 W 8,000 rpm 204 mm 2 mm 12 cm Surfacing plate bench size: 737 x 210 mm Thicknessing plane bench size: 255 x 204 mm Number of blades: 2 Blade shaft diameter: 50 mm HSS planing knives Surfacing stop Automatic, uniform workpiece feed Thicknessing bench with multiple mountings The thicknessing and surfacing benches are made of solid die-cast aluminium, chip discharge hood Including 1 pair of spare blades Integral dust extraction with dust bag Article number: EAN-Code:

22 Cutting, slotting Router, biscuit jointer and masonry channel cutter This range contains powerful, precise machines for hobby and commercial use for all cutting work in wood, such as cutting oval holes and channels, moulding and making wood joints as well as for cutting slots in masonry. R SET/1 Router Stroke height: Chip size: Moulder: 1,050 W 11,500-28,000 rpm 44 mm ø 8 mm ø 45 mm Plastic case Spindle lock for easy changing of the router tools Parallel stop Cutting depth adjustment Clamping tool mounting, 8 mm Adapter for dust extraction Includes 12-piece routing set made of carbide metal Article number: EAN-Code: BJ Biscuit jointer Blade: Cutting depth: 850 W 11,000 rpm ø 100 mm 19 mm Plastic case Angle adjustment Depth adjustment Spacing adjustment Article number: EAN-Code: WLC Masonry channel cutter Blade: Cutting depth: Cutting width: 1,500 W 8,500 rpm ø 150 mm / 125 mm mm mm Plastic case Additional handle Soft start and constant motor power Depth stop indicator Fast sheet changing system Cutting width presetting with flanges Cutting depth adjustment Safety switch External brushes Adapter for dust bag Article number: EAN-Code:

23 Coating removal, deforming, soldering Hot air gun Soldering gun This powerful hot air gun with all the necessary accessories is essential for removing paint and coatings and for deforming and welding plastics. High quality soldering gun with interchangeable tips and integral light for soldering wires and cables, and tin-plating. HG 2000/2 E Hot air gun 2,000 W Temperaturee: Setting Setting Air volume: Setting l/min Setting l/min Ergonomic handling Plastic transport case - Including 22 mm reducer nozzle - Paint scraper - Wide jet nozzle - Jetting nozzle Article number: EAN-Code: SG 100 Soldering gun 100 W Temperature: 500 C Heating time: 12 seconds 2 soldering tips 10 g soldering wire 10 g soldering grease Plastic case Article number: EAN-Code:

24 Drilling, screwing, sawing, cutting and grinding 3-piece tool sets with powerful professional machines This practical tool set makes renovation work at home or in the workshop child s play. 3-piece machine set in a case Consisting of: Hammer drill ED E W Angle grinder AG W Jig saw EJS W Including 10 jigsaw blades SDS drill bit set and 6 grinding discs Article number: EAN-Code: piece machine set including bits and jigsaw blades Consisting of: Cordless screwdriver CD V Ah Router R ,050 W Jigsaw EJS W Including 10 cutters Including 10 jigsaw blades and 7-piece bit box Packed in a carton Article number: EAN-Code:

25 Drilling, screwing, sawing, cutting and grinding 5-piece tool sets Electric drill, cordless screwdriver, jigsaw, angle grinder and orbital sander The ideal machine set in a practical trolley for all mobile DIY work. NEW 3-Part Maschine set Home bau Starter Set Art. Nr: Consisting of EHD of 850 electrical drilling hammers, 850 Watts with 4 drills and 2 chiseis CS portable circular saw 1200 Watts AG Set angle sander 2000W 230mm disk diameter, 3 metal Article number: EAN-Code: 5-piece machine set in a case Cosisting of: Drill 500 W Jigsaw 350 W Cordless screwdriver 14.4 Volt Orbital sander 135 W Angle grinder W including mobile case 5-piece machine set in a mobile case with a telescoping handle Article number: EAN-Code:

26 Wet & dry grinders Double grinders for wet and dry grinding Compact, powerful double grinder for wet and dry work. Sturdy, compact metal casing with grinding shafts mounted in ball bearings. The powerful motor ensures smooth, non-vibration working and excellent results. WDG 150/200 Wet & dry grinder Wet disc: Dry disc: Idling speed of wet disc: Idling speed of dry disc: 400 W 200 x 40 x 20 mm 150 x 20 x 12.7 mm 134 rpm 2,950 rpm 1 wet grinding disc 1 dry grinding disc Water bath container Spark guard Tool support Article number: EAN-Code: DWG 150 Double grinder Dry disc: 150 W 2,950 rpm 50 x 16 x 12.7 mm 1 fine grinding disc 1 coarse grinding disc 2 tool supports Spark guard Article number: EAN-Code: DWG 200 Double grinder Grinding disc size: Idling speed: 400 W 200 x 20 x 32 mm 2,950 rpm 1 fine grinding disc 1 coarse grinding disc 2 tool supports 2 spark guards Article number: EAN-Code:

27 Machine tools Compressors Tile cutters and stone cutting machine Sawing units Column drills Compressors Paint sprayers Welding sets SWISSM

28 Cutting tiles and natural stone Compact tile cutter for private and commercial use This compact tile cutter is ideal for large scale tiling work at home. The precise, adjustable bench with parallel stop and diagonal stop allows floor and wall tiles to be cut precisely and cleanly. The high speed diamond disc runs in a water bath to ensure that the cutting work generates virtually no dust. TCM Tile cutter Cutting heigh: Bench size: Diamant disc: 600 W S2 3,000 rpm 35 mm 330 x 360 mm 180 x 22.2 mm Diamond disc: 180 mm Parallel stop Pivot-mounted bench Article number: EAN-Code: Optional accessories: Diamond cutting disc 180 x 22,2 Article number:

29 Cutting tiles and natural stone Professional tile and stone cutting machines for commercial use Compact, transportable tile and stone cutting machines for longitudinal, mitre, double mitre and jolly cuts. Sturdy, textured bench with workpiece stop and adjustable angle stop. Motor carriage mounted in four ball bearings with replaceable diamond cutting disc. The precision mounting of the motor and the integral water bath with coolant pump makes precision cutting with clean results and virtually no dust possible. These cutting machines are suitable for all stone and tile work, such as: Cutting kerbstones, foundation slabs, steps, tiles made of natural and synthetic stone as well as ceramic tiles. SSCM SSCM Stone cutting machine SSCM SCM W 600 W 2,950 rpm 3,000 rpm Cutting depth: 30 mm at mm at mm at mm at 45 Cutting lenghth: 560 mm 460 mm Working height: 690 mm 690 mm Bench size: 830 x 430 mm 730 x 410 mm Diamant disc: 200 x 25.4 mm 180 x 25.4 mm Cutting angle: Steel bench with rubber coating Aluminium guide Sturdy sub-frame Motor mounted in four ball bearings Attachable sub-frame Large water capacity Integral water pump Motor can be pivoted infinitely from 0-45 Integral transit guards Foot level adjustment Article number: SSCM EAN-Code: Article number: SSCM EAN-Code: Optional accessories: Diamond cutting disc: 200x25.4 mm (SSCM ) Article number: Diamond cutting disc: 180x25.4 mm (SSCM ) SSCM Stone cutting machine 1,500 W S2 3,000 rpm Cutting depth: 65 mm at mm at 45 Cutting lenght: 570 mm Bench size: 960 x 530 mm Diamant disc: 250 x 25.4 mm Cutting angle: 0-45 Steel bench with rubber coating Aluminium guide Sturdy sub-frame Motor mounted in four ball bearings Attachable sub-frame Integral water pump Motor can be pivoted infinitely from 0-45 Integral transit guards Article number: EAN-Code: Optional accessories: Diamond cutting disc 250 x 25.4 mm 29

30 Crosscutting Precision drag, crosscut and mitre saw with double shaft design and belt drive Well-designed, multi-functional drag, crosscut/mitre saw with sturdy double shaft drag mounting. This machine contains all the functions of a professional commercial machine. Turntable with angle adjustment double guide for precise drag cuts turning handle for a wide range of working positions Motor-protecting, sturdy belt drive Double laser cutting guide Saw blade angle to the left and right, 2 x 45 - Stop extension Vice with fast-action spindle. MS L/1 Crosscut and mitre saw with laser guide 1,200 W Idling speed: 4,500 rpm Carbide metal saw blade: Ø 210 x Ø 18 x1.6 mm Cutting angle: 3 x 45 Cutting capacity: at 90 : 130 x 54 mm at 45 : 90 x 54 mm at 2x45 : 90 x 40 mm Laser guide Carbide metal saw blade 24 T Turntable with precision angle adjustment from 45 to +45 Sawing head can be pivoted to the left from 0 to 45 Locking position at 15, 22,5, 30, 45, 90 Bag for chips Article number: EAN-Code: SMS SMS Drag crosscut and mitre saws with laser guide SMS SMS ,400 W 2,000 W Idling speed: 4,500 rpm 4,500 rpm Carbide metal saw blade: ø 210 x 30 x 2,5mm ø 250 x 30 x 2.5mm Cutting angle: 0 x 45 0 x 45 Cutting capacity: at 0 / x 65mm 340 x 60mm at 0 / x 30mm 340 x 42mm Cutting length: 310 mm 335 mm Article number: SMS EAN-Code: Article number: SMS EAN-Code: Features SMS : Carbide metal saw blade 210 mm 24 T Turntable with precision angle adjustment from 55 to +55 Sawing head can be pivoted to the left from 0 to 45 Bag for chips Bench made of die-cast aluminium Extra long drag with 310 mm cutting length Features SMS : Carbide metal saw blade 250 mm 30 T Turntable with precision angle adjustment from 55 to +55 Sawing head can be pivoted to the left from 0 to 45 Bag for chips Bench made of die-cast aluminium Extra long drag with 335 mm cutting length 30

31 Crosscutting Precision drag, crosscut and mitre saws with belt drive or double shaft design Sturdy, multi-functional drag, crosscut and mitre saw with precise aluminium machine bed and double shaft parallel drag guide. Turntable with angle adjustment, saw blade pivots to the left and right, 2 x 45 workpiece support and vice for the safe, clean cutting of wood, metal and plastic. SMS belt drive Drag crosscut and mitre saw 230 V ~ 50 Hz 2,000 W belt drive Carbide metal saw blade: ø 305 x 30 x 3.2mm/36T Idling speed: 3,500 rpm Cutting angle: 2 x 0 x 45 Cutting capacity: at 0 / x 100 mm at 45 / x 100 mm at 0 / x 43 mm at 45 / x 43 mm Carbide metal saw blade 305 mm 32 teeth Turntable with precision angle adjustment from 55 to +55 Sawing head can be pivoted to the left and right from 0 to 45 Bag for chips Bench made of die-cast aluminium 2 bench extensions 1 workpiece clamp Turning handle for four positions Double laser guide Fast-action clamp function Belt drive precise and accurate Fast fixing Article number: EAN-Code: SMS LV SMS block guide Drag/crosscut and mitre saws SMS LV SMS Block 230 V ~ 50 Hz 2,000 W 2,000 W Carbide metal saw blade: Ø 250 x 30 x 2.5 mm/36t Ø 250 x 30 x 3.2mm/36T Idling speed: 4,500 rpm 4,500 rpm Cutting depth: 0 / x 70 mm 300 x 75 mm 45 / x 70 mm 210 x 75 mm 0 / x 40 mm 300 x 45 mm 45 / x 40 mm 210 x 45 mm Features of the SMS : Carbide metal saw blade 210 mm 24 T Turntable with precision angle adjustment from 55 to +55 Sawing head can be pivoted to the left from 0 to 45 Bag for chips Bench made of die-cast aluminium Extra long drag with 310 mm cutting length Features of the SMS : Carbide metal saw blade 250 mm 30 T Turntable with precision angle adjustment from 55 to +55 Sawing head can be pivoted to the left from 0 to 45 Bag for chips Bench made of die-cast aluminium Extra long drag with 335 mm cutting length With precision block guide Article number: SMS LV EAN-Code: Article number: SMS Block EAN-Code:

32 Sawing Universal bench circular saws These compact bench circular saws are suitable for all normal sawing work in a workshop or on a building site. Compact and mobile, they are easy to transport in the case and can be made ready for action in a trice. TS Bench circular saw Lehrlaufdrehzahl: Max. Cutting depth: Bench size: Saw blade: 230 Volt~50 Hz 800 W 2,950 rpm 40 mm 500 x 335 mm Ø 200 x 16 mm 20 teeth Parallel stop / Angle stop Article number: EAN-Code: TS Bench circular saw 1,000 W Idling speed: 2,950 rpm Bench size: 513 x 400 mm (600) Saw blade: Ø 205 x 16 x 2.5 mm Teeth: 20 Cutting depth: at mm at mm Article number: EAN-Code:

33 Sawing Bench circular saws Compact, precise and universal bench circular saw for normal sawing work with parallel stop and angle stop. MUTS Underfloor drag device for sawing a stationary workpiece. TST /1 Bench circular saw with underfloor bench MUTS Bench circular saw with underfloor drag 1,500 W-S6 4,000 rpm Saw blade: Ø 250 x 30 x 3.2 mm Max. cutting height.: 90 : 76 mm, 45 : 60 mm Saw blade height adjustment: Infinite 0-76 mm Cutting angle: 0-45 Bench size: 460 mm x 625 mm Bench height: 902 mm Die-cast aluminium bench Carbide metal saw blade 250 mm - 36 teeth Saw blade angle can be infinitely adjusted Saw blade height can be infinitely adjusted Parallel stop with 2 stop heights Lateral stop and mitre stop Bench size without extensions: 460 x 625mm Bench size with extensions: 625 mm x 925 mm 1,700 W S6-40% Carbide metal saw blade: Ø 210 x 30 x 2.8 Idling speed: 4,300 rpm Cutting depth: 0 /90 62 mm 0 /45 40 mm Drag length: 210 mm Bench size: 661 mm x 608 mm Bench height: ca. 900 mm Underfloor drag Textured bench Carbide metal saw blade 210 mm - 26 teeth Parallel longitudinal stop Height adjustment Pivots through 45 Scale in millimetres Emergency stop safety switch Adapter for dust extraction including hose Sub-frame Article number: EAN-Code: Article number: EAN-Code:

34 Sawing, crosscutting, mitre sawing Combination bench circular saw/ crosscut and mitre saw 2-in-1, combination machine for circular and crosscut sawing. Simple adjusting the saw bench creates a full bench circular saw or a convenient crosscut and mitre saw with all the benefits of a solo machine. This compact, easy to transport machine is perfect for site assembly work. Duo-Cut Crosscut bench circular saw with sub-frame 1,800 W Carbide metal saw blade: Ø 250 x 30 x 3.2 mm 36 teeth Idling speed: 4,500 rpm Bench size: 510 x 470 mm Bench circular saw cutting depth: mm mm Crosscut and mitre saw cutting depth: 0 / x 65 mm 45 /90 90 x 65 mm 0 / x 40 mm 45 /45 90 x 40 mm Article number: EAN-Code: Die-cast aluminium bench Four feet, attachable Parallel and angle stop Emergency power safety switch Dust bag Height and angle adjustment 34

35 Sawing Band saws for wood and metal The wood band saws in the BS series are notable for their precise 3-roller saw band guide and a solid, pivot-mounted aluminium saw bench with longitudinal and angle stop. Their smooth, low noise action makes them ideal for sawing in hobby rooms. Sturdy, compact metal bow saw for workshops and installation contractors. Precise saw band guide using simple saw band clamp adjustment, heavy duty machine vice and base frame. BS 250 BS 350 Band saw BS 250 BS W 350 W Max. cutting depth: 40 mm 80 mm Max. cutting width: 150 mm 190 mm Bench size: 240 x 200 mm 300 x 300 mm Bend length: 1,085 mm 1,425 mm Bend width: 3.5 mm 6.35 mm Solid metal casing Aluminium bench Aluminium parallel stops Saw bench can be angled from point roller saw band guide Article number: BS EAN-Code: Article number: BS EAN-Code: MCS 400 Metal band saw Bend length: Bend width: 400 W 1,450 rpm 1,300 mm 12.5 mm Max. cutting depth: 90 round material 90 mm 90 square material 85 x 85 mm 45 round material 40 mm 45 square material 38 x 38 mm Automatic cut-out Longitudinal stop Sturdy sub-frame Clamp Safety switch Pivot-mounted head 0-45 Adjustable saw blade guide Article number: EAN-Code:

36 Crosscutting Metal crosscut saw Powerful, safe crosscut saw with high torque and low speed. The perfect saw for building sites and workshops for cutting a wide range of metal sections, band steel, pipes, etc. Safe to use with adjustable vice and cutting disc safety cover. MMS 2000 Metal crosscut saw 2,000 W 3,900 rpm Mitre cut: 0-45 Saw thickness: 100 mm in diameter Saw width for square material: 70 x 170 mm Spindle lock Machine vice with fast adjustment Depth stop Dust extraction Article number: EAN-Code:

37 Drilling Column drills High quality, powerful column drills for drilling a wide range of materials. Easy to use. Reliable and durable with a powerful motor and 3-way belt drive to set a wide range of speeds. The height-adjustable drilling bench, hinged transparent drilling guard and sturdy metal stand ticks all the boxes. DP DP Column drills DP DP W 500 W Drilling capacity: Ø 13 mm Ø 16 mm Spindle: MT2 MT2 Spindle deflection: 46 mm 46 mm 5/580-2,650 rpm 9/280-2,350 rpm Max. spindle shaft/head distance 104 mm 115 mm Bench size: 160 x 160 mm 170 x 170 mm Base size: 314 x 200 mm 320 x 198 mm 5 drilling speeds Chuck guard Depth stop Powerful motor Article number: DP EAN-Code: Article number: DP EAN-Code: SB 400 SB 600 Column drills SB 400 SB W 500 W Drilling capacity: Ø 13 mm Ø 16 mm Spindle: MT2 MT2 Spindle deflection: 50 mm 60 mm 5/ rpm 12/ rpm 5/ rpm 12/ rpm Max. spindle shaft/head distance 102 mm 126 mm Bench size: 152 x 170 mm 200 x 200 mm Base size: 320 x 190 mm 380 x 250 mm Article number: SB EAN-Code: Article number: SB EAN-Code:

38 Spraying, blowing, grinding, screwing, drilling Compressor set for universal use Compact mobile compressed air compressors for all conventional pneumatic tools such as spray guns, hammer-action screwdrivers, nail guns, tyre inflators and much more. Long life motor with aluminium compressor unit, effective air cooling to relieve the strain on the motor, sturdy steel tank with condensation drain, pressure reducer with pressure gauge and standard compressed air connector. AC Compressor (induction motor) Motor rating: Intake capacity: Max. pressure: Idling speed: Tank capacity: 1,500 W 2 PS 200 l / min. 8 bar 2,850 rpm 24 litres Pressure controller Pressure gauge 2 pressure connectors Mobile Safety valve Article number: EAN-Code: AC Compressor (universal motor) Motor rating: Motor: Intake capacity: Max. pressure: Idling speed: Tank capacity: 1,500 W 2 PS Universal motor 200 l / min. 8 bar 2,850 rpm 24 litres Tank capacity: 24 litres Intake capacity 206 litres / min. with pressure reducer Pressure gauge 2 quick-action connectors Coupling Article number: EAN-Code:

39 Spraying, blowing, grinding, screwing, drilling Compressor set for universal use Compact module compressed air compressor for all conventional pneumatic tools. Including tool set with spray gun, blow gun, tyre inflator and spiral extension hose. Long life motor with aluminium compressor unit, effective air cooling to relieve the strain on the motor, sturdy steel tank with condensation drain, pressure reducer with pressure gauge and standard compressed air connector to meet high workshop demands. AC Compressor Motor Intake capacity: Max. pressure: Idling speed: Tank capacity: 1,500 W 2 PS 210 l / min. 8 bar 2,850 rpm 50 litres Pressure controller Pressure gauge 2 pressure connectors Mobile Safety valve Article number: EAN-Code: AC 12 Car Tyre Inflator Technical data: -Power supply with 12 V cigarette lighter socket -Operting Pressure max 18 bar -Air capacity max 4,5 l/min -Weight: 0,7 kg -Packing dimension 165 x 80 x 145 mm Pressure gauge 0 to 18 barr 2,9 m connection cable (12 V) with cigarette lighter socket Air hose with quick locking-valve 3 pcs spare adapters (water ball-, air bed-, ball adapter) Article number: EAN-Code:

40 Spraying, blowing, grinding, screwing, drilling Professional compressor accessories We specialise in universal DIY and commercial compressors and offer an extensive range of accessories for all the compressor tools needed at home, for hobbies and by tradesmen. 5-piece pneumatic tool set Article number: EAN-Code: Compressed air hose Article number: EAN-Code: Compressed air hose 10 m 5 m PU Article number: EAN-Code: Blowing gun Article number: EAN-Code: Tyre inflators Article number: EAN-Code: Sand-blasting guns Article number: EAN-Code: Underseal guns Article number: EAN-Code: Ratchet screwdriver set Article number: EAN-Code: Hammer-action screwdriver set Article number: EAN-Code: Hammer-action chisel set Article number: EAN-Code:

41 Painting, glazing Painting set Practical painting set with quiet compact compressor and ergonomic paint spray gun with adjustable nozzle. The high performance compressor guarantees an excellent spraying result thanks to its large air volume. The set contains a viscosimeter and an extension hose for the spray gun to ensure outstanding results. CP 450 Paint spray unit Air intake capacity: Operating pressure: 230 V 450 W 1,500 l / min bar Compressor with adjustable spray gun Hose length: 1.5 m Gun: 1 l Includes viscosimeter Adapter with connectors for inflating boats and balls. Carry strap Article number: EAN-Code:

42 Welding Electric welding sets Compact electric welding sets for manual arc welding for use at home, in garages and workshops. The high performance transformer with cooling fan provides a long duty cycle and a steady arc. The infinite welding current regulation with optical display of the electrode thickness relative to the current strength means that even beginners can produce perfect welding results. EWS 150 Electric welding set Welding current: Insulation class: Duty cycle: Electrodes: Idling voltage: A H - IP21 10 % ED mm 48 V Portable Infinitely adjustable from A Earth cable Electrode cable with holder Fan cooling Welding shield, hammer and brush Article number: EAN-Code: EWS 160 Electric welding set Welding current: Insulation class: Duty cycle: Electrodes: Idling voltage: A H-IP21 10 % ED mm 48 V Portable Infinitely adjustable from A Earth cable Electrode cable with holder Fan cooling Welding shield, hammer and brush Article number: EAN-Code: EWS 200 Combination welding set Welding current: Insulation class: Duty cycle: Electrodes: Idling voltage: 230 V/400 V~50 Hz A H-IP21 10 % ED mm 48 V Mobile Infinitely adjustable welding current Electrodes from mm Can be switched from 230 V to 400 V Fan cooling Earth cable Electrode cable and holder Welding shield, hammer and brush Article number: EAN-Code:

43 Welding MIG-MAG welding sets, inverters Compact shielding gas welding sets for arc welding for use at home, in garages and workshops. The high performance transformer with cooling fan provides a long duty cycle and a steady arc. The precisely adjustable wire feed ensures uniformed welds and good welding quality. MAG 140 Shielding gas welding set MIG-MAG 160 Shielding gas welding set MIG-MAG 200 Shielding gas welding set Welding current: Insulation class: Protection type: Welding wire thickness: Idling voltage: A H IP mm 34 V Sturdy sheet steel casing with rubber impact guard Welding current adjustment Level setting Adjustable wire feed Welding electrode cable Welding shield, hammer and brush Welding current: Fuse: Insulation class: Protection type: Welding wire thickness: Idling voltage: A 10 A H IP mm 35 V Sturdy sheet steel casing with rubber impact guard Welding current adjustment Level setting Adjustable wire feed Fan cooling Mobile with 2 wheels Welding electrode cable Welding shield, hammer and brush Welding current: Insulation class: Protection type: Welding wire thickness: Idling voltage: 230 V-400 V~50 Hz A H IP mm 36.5 V Sturdy sheet steel casing 5 welding settings Variable wire feed Fan cooling Removable hose package Welding electrode cable Welding shield, hammer and brush Article number: EAN-Code: Article number: EAN-Code: Article number: EAN-Code: EWS / 400 V Rated Input Voltage 230V/400V 1ph/50Hz No -load Voltage 50 V Input Capacity 14KVA Current Range Protection Class IP 21 Insulation Class H Cooling Fan Welding cable Welding shield hammer and brush Electrode Torc Protective Mask Article number: EWS

44 Generators / Hoist Pressure washers / Wet & dry vacuum cleaners Generators with alternating current Hoist Pressure washers Wet & dry vacuum cleaners SWISSM info@swissm.ch,

45 Power generation Petrol synchronous generator Compact generator to generator 230 V alternating current. Economical petrol engine with effective air cooling provides reliability, requires no maintenance and generates electricity in the event of a power failure. The reliable power source for holiday homes and summerhouses, for camping and on boats in fact anywhere without a power supply. PG 810 Generator Voltage (output): Max. rating: 800 W Permanent rating: 650 W Engine type: 2-stroke air-cooled Max. engine power: 2 PS Idling speed 3,600 rpm Displacement: 63 cc Tank capacity: 4.2 l Fuel typ: 1:50 Weight: 24.5 kg Generator mode: Synchronous 1 x 230 V socket Overload switch Choke Carry handle Start with pull-cord Article number: EAN-Code:

46 Power generation Petrol synchronous generators Compact generators to generator 230 V alternating current. Economical petrol engines with effective air cooling provide reliability, require no maintenance and generate electricity in the event of a power failure. The reliable power source for holiday homes and summerhouses, for camping and on boats in fact anywhere without a power supply. PG 3010 and PG 2200 Generator PG 3010 PG 2200 Voltage (output): Max. rating: 2,800 W 2,200 W Permanent rating: 2,500 W 2000 W Max. engine power: 6.5 bhp 5.5 bhp Idling speed: 3,600 rpm 3,000 rpm Tank capacity: 15 l 15 l Generator mode: Synchronous Synchronous Engine type: 4-stroke 4-stroke air-cooled air-cooled Consumption/h: 2.15 l Oil capacity: 0.6 l Overload protection 2 x 230 V sockets Low oil guard Tank indicator Voltmeter Mobile (PG 3000F only) Article number: PG EAN-Code: Article number: PG

47 Stromerzeugung Power generation Petrol synchronous generator Compact generator to generate 12 V direct current, 230 V alternating current and 400 V heavy current. Economical petrol engine with effective air cooling provides reliability, requires no maintenance and generates electricity in the event of a power failure. The reliable power source for holiday homes and summerhouses, for camping and on boats in fact anywhere without a power supply. Electric starter ensures that the generator starts easily. PG 5510 Generator Voltage (output): Max. rating: Permanent rating: Max. engine power: Idling speed: Tank capacity: Generator mode: Engine type: Consumption/h: Oil capacity: 5,500 W 5,000 W 13 bhp 3,600 rpm 25 l Synchronous 4-stroke air-cooled 2.95 l 1.1 l Overload protection 2 x 230 V sockets 1 x 400 V socket Low oil guard Tank indicator Electric start Voltmeter Mobile Includes 12 V battery Includes 12 V output Article number: EAN-Code:

48 Lifting Electric hoists Powerful, compact winches for universal use on sites, in workshops and in garages. High safety standard using remote control with EMERGENCY STOP, a powerful motor, large brake to secure the load at any height and automatic limit switch with mechanical IMMEDIATE STOP. Increased safety: No uncontrolled turning of the elevated load since the steel cables are non-rotating. EH Hoist Lifting capacity: Lifting height: Steel cable: Steel cable length: 500 W 100 kg without return roller 200 kg with return roller 12 m without return roller 6 m with return roller ø 4 mm 12 m Safety control switch with immediate stop Automatic brake (Secure the weight at any height) Motor with thermal switch Return rollers with load holder and additional safety spring hook Article number: EAN-Code: EH Hoist Lifting capacity: Lifting height: Steel cable: Steel cable length: 1,000 W 250 kg without return roller 500 kg with return roller 12 m with return roller 6 m without return roller ø 4 mm 12 m Safety control switch with immediate stop Automatic brake (Secure the weight at any height) Motor with thermal switch Return rollers with load holder and additional safety spring hook Article number: EAN-Code: EH 1600/1000 Hoist Tragkraft: Lifting height: Cable speed: 1600 W 500 kg without return roller 1,000 kg with return roller 12 m without return roller 6 m with return roller 10 m/min without return roller 5 m/min with return roller Safety control switch with immediate stop Secured with two double clips Return roller with load hook Motor with thermal switch Article number: EAN-Code:

49 Pressure washing Powerful pressure washers Portable/mobile compact and very powerful units for cleaning a very wide range of surfaces. For washing cars, cleaning facade, preparing for coatings and removing dirt from places with difficult access. High performance for cleanliness and hygiene at home, in the garage, in workshops and for agriculture. Complete with high pressure hose and detergent tank. HPC Pressure washer Operating pressure: Water capacity: 1,850 W 90 bar, max. 160 bar 6 l / min. 3-cylinder steel pump Roll-up pressure hose, 5 m Spray lance with adjustable nozzle Auto-Stop Universal motor Mobile Mixing tank Article number: EAN-Code: HPC Pressure washer Operating pressure: Water capacity: 1,400 W 70 bar up to max. 120 bar 5 l / min Universal motor Steel pump Pressure hose, 5 m Lance with adjustable nozzle Mixing tank Article number: EAN-Code:

50 Pressure washing Powerful pressure washers Portable/mobile compact and very powerful units for cleaning a very wide range of surfaces. For washing cars, cleaning facade, preparing for coatings and removing dirt from places with difficult access. High performance for cleanliness and hygiene at home, in the garage, in workshops and for agriculture. Complete with high pressure hose and detergent tank. HPC HPC Pressure washer HPC HPC Motor: Universal motor Induction motor 2,200 W 1,900 W Operating pressure: 110 bar 110 bar up to max. 160 bar up to max. 160 bar Water capacity 6l/min 6l/min Features HPC : 3-cylinder steel pump Universal motor Pressure hose, 5m Spray lance with adjustable nozzle Mobile Mixing tank Automatic cut-out Features of HPC : 3-cylinder steel pump Induction motor Pressure hose, 5m Spray lance with adjustable nozzle Mobile Mixing tank Automatic cut-out Article number: HPC EAN-Code: Article number: HPC EAN-Code:

51 Wet & dry vacuuming Universal wet & dry vacuum cleaner with outstanding suction power and a functional design Compact, powerful industrial vacuum cleaners with anti-tipping chassis, durable motor with suck and blow function and practical accessories. WDCN L 15L Vacuum cleaner Water column: Tank: Cabel Case Vacuum Rate 1,000 W 1,500 mm 15 l 4M NIRO >=14KPa three pieces pipe long-squae nozzle short nozle dust paper bag sponge filter Flxible hose: 1.5 m Article number: EAN-Code: VC L VC L Wet & dry vacuum cleaners VC L VC L 1,250 W 1,400 W Capacity: 20 l 20 l Suction capacity: >=16,5 KPa >=18 KPa Tank: Stainless steel Stainless steel Cable: 4 m 4 m 1 combination brush for carpets and smooth flooring 1 crevice nozzle, 1 wet filter 1 dirt bag 1.5 m hose, 36 mm 4 wheels 2 extension tubes Suck/blow function switchover point Article number: VC L EAN-Code: Article number: VC L EAN-Code:

52 Wet & dry vacuuming Universal wet & dry vacuum cleaner with outstanding suction power and a functional design Compact, powerful industrial vacuum cleaners with anti-tipping chassis, durable motor, with suck and blow function and practical accessories. VCW L Wet & dry vacuum cleaners 1,250 W Capacity: 29 l Suction capacity: >= 16.5 KPa Tank: Stainless steel Cable: 4 m Multi-function chassis with two castors Dual function combination brush for carpets and smooth flooring 1 crevice nozzle 1 wet filter 1.5 m hose, 36 mm 1 long life pleated filter 1 telescopic suction tube Suck/blow function switchover point Article number: EAN-Code: VCW L VCW L E Wet & dry vacuum cleaners VCW L E - with Synchro socket VCW L VCW L E 1,400 W 1,400 W Capacity: 30 l 30 l Suction capacity: >=18 KPa >=18 KPa Tank: Stainless steel Stainless steel Cable: 4 m 4 m Electric socket: No Yes Multi-function chassis: Yes Yes 2 castors: Yes Yes Dual function combination brush for carpets and smooth flooring 1 crevice nozzle, 1 wet filter 1.5 m hose, 36 mm 1 long life pleated filter 1 stainless steel telescopic suction tube Suck/blow function switchover point Article number: VCW L EAN-Code: Article number: VCW L E EAN-Code: VCW L E Wet & dry vacuum cleaners 1,400 W Capacity: 50 l Suction capacity: >= 18 KPa Tank: Stainless steel Cable: 4 m Multi-function chassis with two castors Dual function combination brush for carpets and smooth flooring 1 crevice nozzle 1 wet filter 1.5 m hose, 36 mm 1 long life pleated filter 1 telescopic suction tube Suck/blow function switchover point Electric socket with slow-down function Water drain valve Article number: EAN-Code:

53 SWISSM Trimmer and motor scythe 2008 Electric lawn mower and electric cultivator Garden equipment Cordless grass shears Electric and petrol hedge cutters Electric chainsaw Domestic waterworks Garden pump Dirty water pump Leaf blowers Garden hoe

54 Lawn trimming Electric lawn trimmers Powerful, lightweight units for cutting grass on small areas, for path maintenance and for cutting grass in places where access is difficult for a lawn mower. With replaceable double line spool and automatic line extension. Ergonomic, fatigue-free use thanks to an adjustable additional handle. RT Lawn trimmer Cutting circle: Line diameter: Line length: 280 W 10,000 rpm Ø 210 mm 1.2 mm 10 m Twin line automatic jog system 2nd handle Cable strain relief clamp Article number: EAN-Code: RT 550D Lawn trimmer Cutting circle: Line diameter: Line length: 550 W 10,000 rpm Ø 320 mm 1.6 mm 8 m Twin line automatic jog system 2. Handle Cable strain relief clamp Telescopic handle Angle adjustment Turning handle Article number: EAN-Code:

55 Trimming lawns, cultivating Lightweight, powerful motor scythes Powerful motor scythes with combination head for twin line spool or cultivating blades. Reliable start with manual petrol injection Lightweight, ergonomic handling with compact motor head and double handle that can be adjusted to the user s body size with safety ON/OFF switch and adjustable shoulder strap. The perfect maintenance unit for lawns, meadows and uncultivated land. BMS 900 BMS 900 T Petrol motor scythe BMS 900 BMS 900 T 0.9 kw 0.9 kw Engine type: 33cc 2-stroke engine 33cc 2-stroke engine Cutting circle: 380 mm with line 380 mm with line Line diameter: 2 mm 2 mm Cutting circle with blade 3-tooth 230 mm 3-tooth 230 mm Teilbare Welle: No Yes Twin line with automatic jog system Bike handle Carry strap Patented easy start system BMS 900 T with split shaft Article number: BMS EAN-Code: Article number: BMS 900 T EAN-Code: BMT 700 Petrol motor trimmer Engine type: Cutting circle: 700 W 26cc 2-stroke engine Ø 380 mm Line diameter: 2 mm Automatic jog system Carry strap Adjustable handle Article number: EAN-Code:

56 Lawn care Electric lawn mowers Electric cultivators Low cost, simple and safe to use. Low noise level does not annoy the neighbours. Comfortable to use with grass box and cutting height adjustment. Lightweight, compact construction, attractive design with durable high performance motors. ELM ELM Electric lawn mowers ELM ELM V~50 Hz 250 V~50 Hz 1,000 W 1,300 W Idling speed: 2,850 rpm 2,800 rpm Motor: Induction motor Induction motor Cutting width: 33 cm 36 cm Height adjustment: 3 settings from mm Grass box: 28 l 40 l Features of the ELM : Central height adjustment Ergonomic, folding guide handle Cable guide Cutting height adjustment from mm Article number: ELM EAN-Code: Article number: ELM EAN-Code: LS Electric cultivator 1,200 W Working width: 33 cm Grass box: 30 l - textile No. of blades: 20 Blade thickness: 2 mm Front wheels: Ø 200 mm Rear: Ø 50 mm roller Ergonomic, folding guide handle Ball bearing mounted blade shaft with steel blades 3 height settings Article number: EAN-Code:

57 Lawn care & sawing and wood care Cordless lawn care tools Cordless hedge cutter Our battery-powered grass shears and lawn trimmers are the perfect tools for small gardens and for keeping lawn edges and paths neat and tidy. Complete with chargers, they can be used at any time and then quickly recharged. Lightweight and cordless, they can be used easily and without causing fatigue even by older people. AGS Cordless grass shears Charging time: Cutting width: Operating time: 7.2 V 1,200 mah 3-5 hours ø 70 mm approx. 70 min Guide handle Wheels Safety switch Charger Article number: EAN-Code: AGS Cordless lawn trimmer Battery: Cutting circle: Line diameter: Charging time: 19.2 V 1.7 Ah 800 rpm 25 cm 1.2 cm 1 hour Twin line Automatic jog system 2nd handle Telescopic handle 1 h charger Article number: EAN-Code: AHT Battery-Heckenschere Battery: Idling speed: Cutting length: Tooth spacing: Bar length: Charging time: 19.2 V 1.7 Ah Ni-Ca 1,500 rpm 46 cm 10 mm 510 cm 1 hour Hand guard Blades cut on both sides Article number: EAN-Code:

58 Cutting and trimming hedges Electric and petrol hedge cutters SWISSM hedge cutters are extremely powerful and ergonomically balanced for long, fatigue-free work, even on difficult land. They have a high safety standard with an IMMEDIATE STOP and safe, easy grip two-hand control. The specially hardened blades ensure a perfect cut over a long time. The low vibration and low noise level make hedge cutting easy and prevent fatigue. HT HT Electric hedge cutter HT HT W 500 W Bar length: 570 mm 555 mm Tooth spacing: 20 mm 16 mm 3,000 rpm 3,000 rpm Article number: HT EAN-Code: Article number: HT EAN-Code: hand safety switch with immediate stop (on HT ) with mechanical immediate stop (on HT ) Counter-rotating safety blades that cut on both sides Aluminium blade cover Impact guard, cable strain relief clamp Metal gearbox ITS GS approved HT Electric hedge cutter Bar length: Cutting length: Tooth spacing: 620 W 680 mm 600 mm 24 mm 3,000 rpm 2-hand safety switch with mechanical immediate stop 3-point circuit for extended use Counter-rotating safety blades that cut on both sides Aluminium blade cover Impact guard Cable strain relief clamp Metal gearbox ITS GS approved Article number: EAN-Code: PHT Petrol hedge cutter Engine type: Bar length: Cutting length: Tooth spacing: 22 cc 2 stroke 500 W 630 mm 600 mm 24 mm 2-hand safety switch with double, counter-rotating safety blades that cut on both sides Blade cover Bar guard Patented easy start system Article number: EAN-Code:

59 Sawing and wood care Petrol chainsaw, Electric chainsaw Sturdy, ergonomic, easy to use. The perfect tool for felling and sawing branches. The chainsaws are notable for their high capacity and safety. Ergonomically positioned handles and a perfect centre of gravity mean the saws can be used for a lengthy period without fatigue. PCS Petrol chainsaw Displacement: Oil capacity: Fuel capacity: Bar length: Oregon chain Cutting speed: 42.5 cc 1.8 kw 260 ml 550 ml 45 cm 18.5 m/sec Safety switch Large hand guard Chain guide with return pinion Chain catch bolt Anti-vibration system Article number: EAN-Code: EK Electric chainsaw with chain tensioning without tools Cutting speed: Cutting length: 2,000 W 13 m/sec. 400 mm Chain from Carlton or Oregon Chinese bar Sturdy claw stop Felling handle Automatic chain lubrication Recoil guard with mechanical brake 2nd mechanical brake Balanced centre of gravity Ergonomic design TÜV GS approved With chain tensioning without tools Article number: EAN-Code:

60 Sawing and wood care Electric chainsaw The electric chainsaws are notable for their high capacity and safety. Ergonomically positioned handles and a perfect centre of gravity mean the saws can be used for a lengthy period without fatigue. The motor has been fitted lengthways to make it more comfortable to work with and for better weight distribution. EK wlk Electric chainsaw with chain tensioning without tools Cutting speed: Cutting length: 2,400 W 17 m/sec. 400 mm Oregon chain + Oregon bar Sturdy claw stop Felling handle Automatic chain lubrication Article number: EAN-Code: With chain tensioning without tools KS 200 Chain sharpener Idling speed: Grinding disc: 220 W 7,500 rpm 100 x 4.5 mm Rotary clamp 35 to the right/left. Chain fixed by large clamp screws Article number: EAN-Code:

61 Fresh water without mains connection Domestic waterworks Essential for the independent water supply for irrigating lawns and vegetables as well as supplying water to summerhouses, holiday homes or hunting lodges from a well or water butt. Water can even be extracted from a stream at any time. The storage tank integrated on the pump has an excess pressure switch and pressure gauge to ensure constant water pressure during extraction. In addition the pressure storage tank ensures that the quiet pump switches on less frequently. WW Domestic waterworks Delivery rate: Delivery pressure: Max. intake head: 230 V ~ 50 Hz 600 W max. 2,800 l 4 bar 8 m Pressure and intake connection 1 Carry handle 20 l steel tank 2-3 bar pressure switch Pressure gauge Article number: EAN-Code: WW Domestic waterworks Delivery rate: Delivery pressure: Max. intake head: 1,200 W 3,800 l/h 5 bar 8 m 24 l stainless steel tank Stainless steel pump casing 2-3 bar pressure switch Pressure gauge Article number: EAN-Code:

62 High pressure for watering the garden High performance garden pumps Our garden pumps enable you to extract water from a wide range of reservoirs such as cisterns, rainwater tanks, garden ponds or a stream with the spray pressure of a water pipe. They are also ideal for draining building trenches or flooded cellars. The high performance pump motors and dirt filters ensure that they will offer a long, trouble-free service life. GPJ Garden pump 230 V ~ 50 Hz 600 W Delivery rate: max. 2,800 l Delivery pressure: 3.5 bar Intake head: 8 m With or without plastic guard for motor Pressure and intake connection 1 Carry handle ON/OFF switch Article number: EAN-Code: GPJ Garden pump Max. delivery rate: Max. delivery head: Max. delivery pressure: Intake head: 1,200 W 3,800 l/h 50 m 5 bar 8 m Stainless pump casing Carry handle ON/OFF switch Pressure and intake connection 1 Overload guard Article number: EAN-Code:

63 Draining, pumping out and pumping over Submersible motor pumps for dirty water Powerful dirty water pumps for draining ponds, cellars, garden fountains or flooded building trenches and pumping water from rainwater tanks into the garden pond and much more. The integral float switch reliably prevents accidental dry operation. CWP 250 Dirty water pump-niro Max. delivery rate: Max. delivery head: Submersion depth: Foreign bodies up to: 250 W 6,500 l/h 5,5 m 5 m 3 mm Mains cable: 10 m H05RNF Float switch 1½ IG pump outlet Overload guard TÜV GS approved Article number: EAN-Code: WWP Dirty water pump WWP Dirty water pump Max. delivery rate: Max. delivery head: Submersion depth: Foreign bodies up to: 400 W 7,500 l/h 5 m 5 m 30 mm 750 W 13,000 l/h 9 m 8 m 35 mm Mains cable: 10 m H05RNF Float switch 1½ IG pump outlet Overload guard Article number: EAN-Code: Article number: EAN-Code: WWP Dirty water pump-niro Max. delivery rate: Max. delivery head: Submersion depth: Foreign bodies up to: 750 W 12,500 l/h 8 m 5 m 35 mm Mains cable 10m H07RNF Float switch 1¼ IG hose connector Overload guard TÜV GS approved Article number: EAN-Code:

64 Leaf vacuuming and blowing Leaf blowers Powerful leaf blower with shredder and large debris bag. Easy handling with rollers on the bottom and an adjustable shoulder strap. Can be switched to suction and blowing function. The integral shredder reduces the size of the vacuumed leafs to around 1/10 of its volume. This means that large volumes of leafs can be removed without having to empty the debris bag. EGV 2500 Electric leaf blower 2,500 W Blower speed: max. 275 km/h Suction capacity: 13.5 cbm/min Volume reduction: 10:1 3 functions: vacuuming, blowing, shredding Carry strap Leaf bag 45 l Wheels Article number: EAN-Code:

65 Loosening soil Petrol hoes These powerful hoes are designed for turning over even very compacted soil. The sturdy 4-stroke engine and specially designed blades ensure rapid operation and perfect soil loosening. Comfortable projecting handles with throttle lever and IMMEDIATE STOP as well as the slewing guide wheel ensure mobility and easy control of the motor hoe. PMT 40 PMT 50 Garden care hoes PMT 40 PMT 50 Motor: 1-cyl, 4-stroke 1-cyl, 4-stroke OHV, 118 cc OHV, 163 cc 2.93 kw / 4 PS 3.5 kw / 4.76 PS Working width: 36 cm cm Tank capacity: 1.6 l Features PMT 40/PMT 50: Hoe blades: 4 x 26 cm diameter Fuel: Unleaded petrol Dead man s control Guide wheel Article number: PMT EAN-Code: Article number: PMT EAN-Code:

66 Shredding, composting Electric garden shredders Garden sprayers Powerful and safe garden shredders with automatic branch infeed and sturdy cutting units for shredding hedge and tree cuttings, shrubs and bushes into small pieces for composting. The features of all MATRIX shredders comply with the latest safety standards with a safety motor brake, motor circuit-breaker, large branch hopper with recoil guard. Large wheels provide stability and mobility. EGS 2400 Electric shredder Rating : Max. branch size: 2,400 W 40 mm Large filling opening Sturdy chassis with wheels Motor brake Motor circuit-breaker Article number: EAN-Code: SG 3-5 Garden sprayer Max. capacity: Operating pressure: 5 l 3 bar Carry strap Brass lance Brass nozzle Article number: EAN-Code:

67 SWISSM plug and work