Transcription

1 Tel: Tel: Tel: Fax: Fax: Fax: c

2 Terms and Conditions ORDER Minimum order is $0.00 CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please furnish us with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order. A credit limit will be imposed on new accounts until credit has been established. PAYMENT TERMS Terms are net 0 days. Catalog prices are subject to change without notice. FREIGHT Orders are shipped F.O.B. from our manufacturing facility.(international Shipments are Incoterms: Ex Works). ORDER CANCELLATION material. In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization number and shipping instructions must be obtained in advance before an item can be returned. CLAIMS All claims or product shortages must be made within 0 days of the invoice date. CONNECT WITH WILSON TOOL wilsontool.com is your online source for the latest news and information from Wilson Tool. Available in seven languages, wilsontool.com is a great resource for all of our customers around the globe. Our e-newsletters not only keep you up to date on the latest product and company news along with workshop and class information, but each month we provide a solutions-based article to improve performance and productivity in your shop. Register at wilsontool.com Tel: Tel: Tel: Fax: Fax: Fax:

3 TABLE OF CONTENTS Improve Wear Resistance with Optima. Every Wilson Trumpf style punch is available with Wilson s exclusive Optima coating. Developed by Wilson engineers, Optima provides a surface hardness, wear resistance and lubricity unmatched by any other coated or uncoated turret punch press tooling. The result is a longer tool life, more hits between sharpenings, reduced galling, better performance and less downtime. Optima Coating Provides: Longer tool life Increased wear resistance More hits between sharpenings Reduced adhesion (galling) Reduced slug pulling Reduced corner breakdown Punch Life The yellow area indicates actual results achieved through three tool sharpenings of.00" (0.mm) each. The complete graph indicates projected results with a total of." (mm) removed for sharpening. Number of Hits Improved special tooling performance Lower overall tooling costs In-house coating facilities allow us to deliver faster and maintain total quality control Material Adhesion Tip Wear Machine Groups/Keying Chart... Punch & Punch Holders... Series Round & Shape...-7 Standard Tools Round Size 0, I, II Standard Tools Standard Shape Size 0, I, II...9 Heavy Duty Tooling...0 Keyed Collar & Punches... Close to Form Slitting Punch... Parting Tool Dies... Quick Set Parting Tool Punch... Multi-Tool Station... Multi-Tool Station... Multi-Tool Station...7 Multi-Tool 0 Station...8 SPECIALS A-Plus...9 Coining...0 FORMING Card Guide... Emboss... Extrusion... Hinge Tool... Progressive Rib... Rollover Tool... LANCE & FORMS Lance & Form... 7 Bridge Lance & Form EKO...9 Half shear / Rooftop Shear... 0 Scratch tool... Louvers... Thread Form... Thread Loop... PIERCE Cluster Tools... SHEET MARKING Letter Stamp... Multi-Scribe... Stamping...7 SPECIALTY Rolling Deburring...8 Opti-Bend...8 Tapping Tool...9 Zip-Tech...9 Wilson Wheel Family...0 Special Shapes...-7 Specials Large Diameter Hole Punching...8 Tel: Tel: Tel: Fax: Fax: Fax:

4 MACHINE GROUPS / KEYING CHART MACHINE GROUPS A B C D E F G H I S CN 700 CN 90E CN 00S TRUMATIC SUNIMAT 00 TRUMATIC TRUMATIC TRUMATIC TRUMATIC MINIMATIC CN 900 CN 90 CN 00A 0 TRUMATIC TRUMATIC 0W 0AW 00R 000R 00 CN 70 CS 7 CS 0 0K 0K W 0W 00R 00R TRUMATIC CN 90 CS 7. CS 0 0M K K 80W 00W 90R 00R 0R CS 0A K K 80.W 00LW 00L R 0R MP 80K 00K 80R 00PW R MPD 80.K 00LK 80LW 00TOP 000R 80KD 00PK 80.LW 00W 000R 80LK 00K ELX/SWIFT 000R 80.LK L 0 0R 0 0R KEYING FOR NON-ROTATIONAL MACHINES Tel: Tel: Tel: Fax: Fax: Fax:

5 -- SERIES TOOLING Punch Assembly 9 shown -- PUNCH HOLDERS DESCRIPTION Cat No. Price Punch Holder Assembly* [0-0 mm] 9 Precision Ground Spacer [0-0 mm] 80 Punch Holder Assembly* [ mm] 0 Precision Ground Spacer [ mm] 807 * Each Punch Holder Assembly is shipped with a Precision Ground Spacer. REPLACEMENT PARTS DESCRIPTION Cat No. Price Cheese Head Screw M x mm [0-0] Cheese Head Screw M x 7mm [0.0-7.] 0 Punch Collar Key Retaining Ring. mm x.0mm Socket Head Cap Screw M8 x 0mm 0 Lockwasher M Magnetic I.D. Label 7 ROUND DIE INSERTS DIAMETER Cat No. Price 0.7 (0 0.0mm (0.0.0mm) 98 SHAPE DIE INSERTS DIMENSION Cat No. Price 0.7 (0 0.0mm) (0.0.0mm) 98 DIE INSERT SHIM PACKS DIMENSION Cat No. Price Shim Pack (0-0.0mm) 98 Shim Pack (0.0 - mm) 98 Die Insert -- URETHANE STRIPPERS DESCRIPTION Cat No. Price RD Price SH Push on for flat [0-0 mm A Dim] Push on for whisper/long [0-0 mm A Dim] 9 Push on for flat [0.0-0 mm A Dim] Push on for whisper/long [0.0-0 mm A Dim] Tel: Tel: Tel: Fax: Fax: Fax:

6 -- SERIES ROUND Flat Whisper Shear ROUND PUNCH Diameter Flat Whisper Shear Long ** Optima TM Cat No. Price Cat No. Price Cat No. Price Add-on [ mm] [ mm] [ mm] [ mm] [.0-7.0mm] **For Group I machines. Not available with shear. ROUND DIE Size Diameter Cat No. Price I Up to.0 [.00 mm] 79 II Up to.8 * [8.80 mm*] 77 II. -.0 [ mm] 77 ROUND STRIPPER Description Cat No. Price Group H/I 8 Keyed 00 Stripper Pin 79 ADD ONS Special Shears Add on for Rounds Add on for Shapes Inverted Rooftop/Single Concave Small Diameter Punch Die Small Width Punch Die Size I [ mm] [ mm] Size I Size II [.7 -.mm] [.0 -.mm] Double Valley/Double Concave Clearance <.00 [0.0mmm] [ mm] Size II Size I Size I [.0 -.mm] Size II Size II Clearance <.00 [0.0mmm] Size I Size II Tel: Tel: Tel: Fax: Fax: Fax:

7 -- SERIES SHAPE Flat Whisper Shear SHAPE PUNCH Diameter Flat Whisper Shear Long ** Optima TM Cat No. Price Cat No. Price Cat No. Price Add-on [ mm] [ mm] [ mm] [ mm] [.0-7.0mm] **For Group I machines. Not available with shear. SHAPE DIE Size Diameter Cat No. Price I Up to.0 [.00 mm] 70 II Up to.8 * [8.80 mm*] 78 II. -.0 [.0-77 mm] 7 SHAPE STRIPPER Description Cat No. Price Group H/I 9 Keyed 08 Stripper Pin 79 IUS FOR CHAMFER CORNERS STANDARD SHAPES PUNCHES Radius or Chamfer Size [ mm] [.8 -.mm] Greater than.0 [.mm] DIES Radius or Chamfer Size Total Add On Total Add On ET Equilateral SD Single-D LD Long-D Triangle SQ Square HX Hexagon DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon Any Size NOTE: For non-rotational keying, see page Tel: Tel: Tel: Fax: Fax: Fax:

8 STANDARD TOOLS ROUND SIZE 0, I, II ROUND PUNCH Flat Whisper Shear Size Diameter Flat Whisper Shear Long ** Optima TM Cat No. Price Cat No. Price Cat No. Price Add-on [ mm] [.0-0. mm] I [ mm] II * [ mm*] II [ mm] II * [ mm] II * [ mm] Not recommended for punching stainless steel. *For Group S machines. **For Group I machines. Not available with shear. ROUND DIE Size Diameter Cat No. Price I Up to.0 [.00 mm] 79 II Up to.8 * [8.80 mm*] 77 II. -.0 [ mm] 77 *For Group S machines. Note: For size III tooling, contact our sales desk. ROUND STRIPPER Description Cat No. Price Keyed 00 Group H*/I 8 Group S 0 Non-Keyed Stripper Pin 79 ADD ONS Special Shears Add on for Rounds Add on for Shapes Inverted Rooftop/Single Concave Small Diameter Punch Die Small Width Punch Die Size I [ mm] [ mm] Size I Size II [.7 -.mm] [.0 -.mm] Double Valley/Double Concave Clearance <.00 [0.0mmm] [ mm] Size II Size I Size I [.0 -.mm] Size II Size II Clearance <.00 [0.0mmm] Size I Size II 8 Tel: Tel: Tel: Fax: Fax: Fax:

9 STANDARD TOOLS STANDARD SHAPES SIZE 0, I, II STANDARD SHAPE PUNCH Flat Size Diameter Flat Whisper Shear Long ** Optima TM Cat No. Price Cat No. Price Cat No. Price Add-on [ mm] [.0-0. mm] I [ mm] II * [ mm*] II [ mm] Whisper Shear II * [ mm] II * [ mm] Not recommended for punching stainless steel. *For Group S machines. **For Group I machines. Not available with shear. SHAPE DIE Size Diameter Cat No. Price I Up to.0 [.00 mm] 70 II Up to.8 * [8.80 mm*] 78 II. -.0 [.0-77 mm] 7 *For Group S machines. SHAPE STRIPPER Description Cat No. Price Keyed 08 Group H /I 9 Group S 00 Non-Keyed 7 Stripper Pin 79 IUS FOR CHAMFER CORNERS STANDARD SHAPES PUNCHES Radius or Chamfer Size [ mm] [.8 -.mm] Greater than.0 [.mm] DIES Radius or Chamfer Size Total Add On Total Add On ET Equilateral SD Single-D LD Long-D Triangle SQ Square HX Hexagon DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon Any Size NOTE: For non-rotational keying, see page Tel: Tel: Tel: Fax: Fax: Fax:

10 HEAVY DUTY TOOLING ➆ ➇ ➀ ➅ ➂ ROUND PUNCH Diameter Round Shape Cat No. Price Cat No. Price Heavy Duty Flat Punch [0-0mm] 0 Heavy Duty Whisper Punch [0-0mm] Heavy Duty Punch (Rooftop) [0-7.mm] 07 0 Heavy Duty Die 7 78 ➄ ➃ Stripper, Keyed Stripper, Non-keyed 7 Stripper Group H 8 9 Heavy Duty System Collar 8 8 ➁ 7 Spare Collar Key 8 Key Locating Screw Collar Clamping Screw (not shown) Die Shim Pack (not shown) 8 8 Optima TM add-on for punch N/A N/A The Heavy Duty system is designed to withstand the higher tonnage associated with punching and nibbling thicker materials. The punch is strengthened by having a large shoulder, enabling it to withstand the higher forces involved. It also has extra back taper as standard, reducing the galling and pick-up often associated with thicker materials. Optima coating on the punch will also greatly improve performance. The die is strengthened by a step on the bottom making the effective thickness of the die greater. DESIGN CRITERIA Minimum punch dia.9" (0.00mm) (Below this use standard size punch). Maximum die A dimension.7" (9mm). Uses Heavy Duty system collar. Has extra back taper as standard..09" (.00mm) radius on corners will increase the life of the punch and die. Rooftop or whisper shear will reduce the tonnage significantly as long as the depth of shear is at least half the thickness of the material. Heavy Duty punch to be used on material.0" (.mm) thick and above or where punching force is over. tons. Heavy Duty die to be used where punching force is over 0 tons. Uses standard strippers. Tools for thicker plate often exceed the machine tonnage. Ask the sales desk to check this for you. Size and shape required Material thickness and type Machine model 0 Tel: Tel: Tel: Fax: Fax: Fax:

11 KEYED COLLARS & PUNCHES The Wilson Tool Keyed Collar allows for a keyed punch to be set at 0,, 90 or without the use of Quick Set.This keyed collar is designed for use with Wilson Tool Keyed Trumpf style punches. KEYED COLLARS Description Cat No. Price Size Collar 0º - º - 90º - 80º 7 KEYED PUNCHES Dimension Cat. No. Price up to.80 [0.mm], Flat [ mm], Flat 7 up to.80 [0.mm], Whisper [ mm], Whisper 77 Optima TM Add-on N/A Keyed collar fitted to punch Because of the rotation feature of today s machines, tools often remain in the holder for longer periods of time without being checked. With a keyed punch and collar, a positive key location between the punch and collar results in cost savings that are realized by less scrap and longer tool life now that punch movement has been eliminated. The positioning is 00% reliable and repeatable. The inherent operational margins for error in the Quick Set System increase your risk for time consuming and costly problems. The Wilson keyed collar provides 00% accurate alignment every time. DESIGN CRITERIA Fixed slots for greater accuracy and consistency. Reduced downtime. No need to use Quick Set. Much faster than Quick Set allowing the operator to carry out further tasks. Inherent accuracy reduces the reliance required on the operator. Consequent scrap rate reduction. The punch cannot turn at all during operation. This time-saver works by simply placing the collar on the punch and tightening one screw. Tel: Tel: Tel: Fax: Fax: Fax:

12 CLOSE-TO-FORM SLITTING/PARTING PUNCH DURA-BLADE PUNCH ASSEMBLY Description Cat No. Price Complete punch assembly (includes shims) 78 Punch insert only 78. mm shim pack 789 WILSON -- PUNCH ASSEMBLY Description 0-0 mm x mm 0-7. mm x mm Cat No. Price Cat No. Price Complete punch assembly (includes shims) Punch only Urethane Strippers (Pair) 70 7 STANDARD PUNCH ASSEMBLY Description 0-0 mm x mm 0-7. mm x mm Cat No. Price Cat No. Price Complete punch assembly (includes shims) 7 7 Punch only 8 89 Urethane Strippers (Pair) 70 7 Tel: Tel: Tel: Fax: Fax: Fax:

13 SLITTING/PARTING TOOL DIES PARTING TOOL DIE ASSEMBLY lengths up to.0 (7.mm) widths of.00 [.08mm] and.0 [.mm] Description Cat No. Price Complete Assembly without Blade Blade Fixing Screw Blade, max. length.0 [7. mm] Shim Pack (not shown) 9 The blade holder is designed to accept the interchangeable rectangular die blades, and also any special shapes with maximum length of.0 (7.mm). PARTING TOOL DIE ASSEMBLY lengths up to.000 (7.0mm) widths of.00 [.08mm] and.0 [.mm] Description Cat No. Price Complete Assembly without Blade Blade Fixing Screw Blade, max. length.000 [7.0 mm] Shim Pack (not shown) The blade holder is designed to accept die blades, with maximum length of.000" (7.0mm). DESIGN CRITERIA Special sizes and shapes available. Must fit within ranges as specified. Maximum material thickness is.8" (.00mm). Blades can be reground by.09" (.00mm) max. Must be held flat for regrinding and coolant must be used. To ensure the screws do not come loose, reassemble using Loctite. Conventional rectangle size or special size and shape. Material type and thickness. Machine model. Tel: Tel: Tel: Fax: Fax: Fax:

14 QUICK SET SLITTING/PARTING TOOL PUNCH WITH INTEGRAL COLLAR QUICK SET PARTING TOOL PUNCHES The parting tool punches and dies can be used as a more cost effective slitting method. Instead of replacing the entire punch and die, only new blades need to be re-ordered. There are two fixed collar options available, one at 0 and one at 90. The fixed collar enables quicker set up times and greater accuracy. The blades are available in the following tool sizes: Length up to.000" (7.0mm) and widths available.00" (.08mm) and.0" (.mm). (Not standard to North America - mm width available) Special shapes are available to suit your application (e.g. special inverted diamond blades for microjointing). *Standard for Trumpf machines Description Cat No. Price Complete Assembly without Blade 0º (.00 ) Complete Assembly without Blade 90º (.00 ) * Complete Assembly without Blade 0º (.0 ) Complete Assembly without Blade 90º (.0 ) * Location Pin 970 Blade Locking Screw [0.0 mm] x.00 [.08 mm] Blade [0.0 mm] x.0 [. mm] Blade 0.8 [0.0mm] -.0 [7.mm] x.00 [.08mm] Blade 07.8 [0.0mm] -.0 [7.mm] x.0 [.mm] Blade 08.0 [7.mm] [7.mm] x.00 [.08mm] Blade 09.0 [7.mm] [7.mm] x.0 [.mm] Blade 0 Optima TM add-on for punch N/A METRIC QUICK SET PARTING TOOL PUNCHES Not Standard to North America Description Cat No. Price Complete Assembly without Blade 0º 00 Complete Assembly without Blade 90º 0 Location Pin 970 Blade Locking Screw x mm RT Blade with 0.mm radius 0 x mm RT Blade with 0.mm radius 7 7. x mm RT Blade with 0.mm radius 0-0 x mm Blade (Special) x mm Blade (Special) 8-7. x mm Blade (Special) 9 Optima TM add-on for punch N/A The parting tool punch holder is designed to accept interchangeable punch blades up to a maximum length of.000" (7.0mm), with widths of.00" (.08mm) and.0" (.mm). The blades have a regrind life of.8" (.00mm) and the assembly is limited to use in up to.8" (.00mm) material. Blades are supplied with rooftop shear as standard to reduce punching force and noise. The Parting Punch Assembly is perma-nently set at 0 or 90 eliminating any risk of blade misalignment. DESIGN CRITERIA Maximum material thickness is.8" (.00mm). Used with standard stripper. Blades supplied only with rooftop shear. Must be reground in vibration free fixture with coolant. Special sizes and shapes available. Must fit within ranges as specified. Conventional rectangle size or special size and shape. Material type and thickness. Machine model. Optima coating option. Tel: Tel: Tel: Fax: Fax: Fax:

15 MULTI-TOOL -STATION FOR TRUMATIC 0R/0R AND GROUP H MACHINES Note: Max Material. (.mm) Mild steel & Aluminum.079 (mm) Stainless steel COMPLETE PUNCH AND DIE ASSEMBLY WITH ALIGNMENT Description Cat No. Price Trumatic 0R/0R 888 Group H 88 PUNCH ASSEMBLY * Description Cat No. Price Trumatic 0R/0R 89 Group H 88 MT Alignment Tool 89 DIE ASSEMBLY * Description Cat No. Price Trumatic 0R/0R & Group H 8 *Note: Price does not include inserts. MULTI-TOOL -STATION PUNCH Description Cat No. Price Optima Add-on Round Punch Shape Punch Maximum Punch size:.0" (mm) MULTI-TOOL -STATION DIE Description Cat No. Price Round Die Shape Die MT Die Shim Pack 89 Note: All punches and dies will be made for Position Angle 90 unless stated otherwise. Round punches Optima coated as standard. ADD ONS Add on for Rounds Add on for Shapes Small Diameter Die Small Width Punch Die [ mm] [ mm] [.7 -.mm] [.0 -.mm] Clearance <.00 [0.0mmm] Clearance <.00 [0.0mmm] Note: Add $7. to round or shape punch for extra straight before radius, extra back taper, or no back taper. Tel: Tel: Tel: Fax: Fax: Fax:

16 MULTI-TOOL -STATION FOR TRUMATIC 0R/0R AND GROUP H MACHINES Note: Max Material. (.mm) Mild steel & Aluminum.079 (mm) Stainless steel COMPLETE PUNCH AND DIE ASSEMBLY WITH ALIGNMENT Description Cat No. Price Trumatic 0R/0R 889 Group H 887 PUNCH ASSEMBLY * Description Cat No. Price Trumatic 0R/0R 89 Group H 88 MT Alignment Tool 89 DIE ASSEMBLY * Description Cat No. Price Trumatic 0R/0R & Group H 8 *Note: Price does not include inserts. MULTI-TOOL -STATION PUNCH Description Cat No. Price Optima Add-on Round Punch 7 Shape Punch 8 Note: All punches and dies will be made for Position Angle 90 unless stated otherwise. Round punches Optima coated as standard. Maximum Punch size:." (0.0mm) MULTI-TOOL -STATION DIE Description Cat No. Price Round Die 9 Shape Die 0 MT Die Shim Pack 88 IUS FOR CHAMFER CORNERS PUNCHES STANDARD SHAPES Radius or Chamfer Size Total Add On ET Equilateral SD Single-D LD Long-D Triangle [ mm] SQ Square HX Hexagon [.8 -.mm] Greater than.0 [.mm] DIES DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon Radius or Chamfer Size Total Add On Any Size NOTE: For non-rotational keying, see page Tel: Tel: Tel: Fax: Fax: Fax:

17 MULTI-TOOL -STATION -STATION ASSEMBLY UNITS Description Cat No. Price Upper Unit Assembly 97 Lower Unit Assembly 98 Stripper with 7.mm Dia. Holes 99 Fitted Stripper (for thin mat l only 8 ga. or less) 90 Note: Max Material.77 (.mm) Mild steel & Aluminum.8 (mm) Stainless steel MULTI-TOOL -STATION PUNCH Description Cat No. Price Optima Add-on Round Punch 7 Shape Punch 7 Maximum Punch size:.0" (mm) MULTI-TOOL -STATION DIE Description Cat No. Price Round Die 77 Shape Die 78 MT Die Shim Pack 00 Note: All punches and dies will be made for Position Angle 90 unless stated otherwise. Round punches Optima coated as standard. ADD ONS Add on for Rounds Add on for Shapes Small Diameter Punch Die Small Width Punch Die [ mm] [ mm] [.7 -.mm] [.0 -.mm] Clearance <.00 [0.0mmm] Clearance <.00 [0.0mmm] Note: Add $7. to round or shape punch for extra straight before radius, extra back taper, or no back taper. Tel: Tel: Tel: Fax: Fax: Fax:

18 MULTI-TOOL 0-STATION 0-STATION ASSEMBLY UNITS Description Cat No. Price Upper Unit Assembly 97 Die Holder Assembly Individual Die Design 98 Stripper with.7mm Dia. Holes 99 Fitted Stripper (for thin mat l only 8 ga. or less) 970 Note: Max Material.77 (.mm) Mild steel & Aluminum.8 (mm) Stainless steel Maximum Punch size:." (0.mm) Note: All punches and dies will be made for Position Angle 90 unless stated otherwise. Round punches Optima coated as standard. MULTI-TOOL -STATION PUNCH Description Cat No. Price Optima Add-on Round Punch 809 Shape Punch 80 MULTI-TOOL 0-STATION DIE Description Cat No. Price Round Die 99 Shape Die 997 MT0 Die Shim Pack 99 TRUMPF ORIGINAL DIE DESIGN Description Cat No. Price Lower Unit Assembly (no die plate) 98 Die Plate 808 IUS FOR CHAMFER CORNERS PUNCHES STANDARD SHAPES Radius or Chamfer Size Total Add On ET Equilateral SD Single-D LD Long-D Triangle [ mm] SQ Square HX Hexagon [.8 -.mm] Greater than.0 [.mm] DIES DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon Radius or Chamfer Size Total Add On Any Size NOTE: For non-rotational keying, see page 8 Tel: Tel: Tel: Fax: Fax: Fax:

19 A-PLUS SERIES Maximize your "A" dimension with the A-Plus Series of tooling from Wilson Tool. This line of Trumpf-style special tools extends the range of forming in the A-dimension, allowing for longer and larger forms. A-Plus offers a full additional.0" [.mm] or more in your forming applications. A-Plus Series tooling is available for most Trumpf Group I machines. Machine specifications subject to change. Trumpf-style A-Plus seris tooling requires a modified cartridge. DESIGN CRITERIA Louver Max. length is.0" [0.mm]. Built-in stripping in lower unit for trouble free sheet travel and simple programming. Replaceable forming unit in the die. Card Guide Max. length is." [8.mm]. Lance & Form Max. length is." [88.9mm]. Can be used in many applications, such as for airflow, decoration, location markers sheer tabs, wire harnesses and clip attachments. Machine and model number Material thickness and type Description Cat No. Price A-Plus Cartridge 9 A-Plus Cartridge for ToolMaster System Trumpf Die Plate Cartridge Magnetic Pad Cartridge Magnetic Pad ( pack) 9 Tel: Tel: Tel: Fax: Fax: Fax:

20 COINING TOOLS FORM-DOWN / FORM-UP APPLICATIONS Standard Counterbore w/hole Coin w/counterbore Blind Counterbore Countersink Countersink with counterbore Counterbore (with hole or without hole) Chamfered edges Deburring Coining operations on the punch press eliminate the costly and time consuming secondary operation of drilling countersinks. Pre-punching a hole prior to coining, results in a higher quality finished form. Interchangeable tip for form down countersink allows you to easily change coin sizes and reduce tooling costs. The form up coin die is made self stripping. Coined Countersink ANGLE B Coined Counterbore B Machine model Material thickness and type Angle, coin diameter, thru-hole With or without pilot Form-up or form-down A C FORM DOWN C FORM-DOWN C FORM UP C Description Cat. No. Coining Tool (Solid Style Punch) Counterbore Tool (Solid Style Punch) B A B ANGLE Estimated pre-punch formula: B - [(B - C) X.7] = Pre-punch 0 Tel: Tel: Tel: Fax: Fax: Fax:

21 CARD GUIDE FORM-UP APPLICATIONS A card guide is used for retaining printed circuit boards that require standard lead-in or special lead-in shapes. Standard The replaceable inserts will lower your costs and allow you to convert them to different size card guides. Wilson Tool will estimate the web of material to be formed on all Card Guides. Special lead-ins available wrap around, closed end, and angled end. The form is internally stripped for best results. Wilson Tool will develop the pre-punch shape and size on special lead-in card guides. Tooling is ABS/WLS ready, minimizing wear and maintenance. All tools are tested and inspected before shipping. Wrap Around Machine model Material thickness and type Drawing of card guide desired, center-to-center location and narrowest pre-punch Pre-punch shape: rectangle, obround, or rectangle with radius corners Closed End B FORM-UP CARD TOOL Tool Type Description Cat. No. Size II Maximum.7mm 9 D C A E F Tel: Tel: Tel: Fax: Fax: Fax:

22 EMBOSS FORM-UP / FORM-DOWN APPLICATIONS Embosses, dimples and forming tools are used to create stand-offs, spacers, countersinks, locks for nuts and logos. All tools are made positive form design for a consistent high quality form. Logos embosses and other special shape embosses can be manufactured easily when an electronic file is provided. All tools are tested and inspected before shipping. Machine model Material thickness and type Drawing with dimensions (height, diameter or shape, angle, radius, through-hole, etc. Form-up or form-down FORM-UP EMBOSS Tool Type Description Cat No. Size I With Stripping 7 Size I Without Stripping 9 Size II With Stripping 9 Size II Without Stripping FORM-DOWN EMBOSS Tool Type Description Cat No. Size I Without Stripping Size II Without Stripping 7 Size II With Stripping 9 Tel: Tel: Tel: Fax: Fax: Fax:

23 EXTRUSION APPLICATIONS Extrusions can be used in a broad spectrum of applications, such as self-tapping screws, cooling tube holders, air flow applications or tread plate. Self-stripping design for consistent, trouble-free operation. A wide variety of coatings are available for longer life and better stripping. All tools are tested and inspected before shipping. Machine model Material thickness and type I.D. and height or screw size and type Tolerance of I.D. Form-up or form-down Specify center-to-center if more than one extrusion exists on the sheet. FORM-UP EXTRUSION Tool Type Description Cat. No. Size II Extrusion Assembly Size II Replacement Insert N/A A B Tel: Tel: Tel: Fax: Fax: Fax:

24 HINGE TOOL APPLICATIONS Standard fully curled hinge Offset fully curled hinge One-hit half knuckle hinge Standard Hinge tools eliminate costly hardware, fitting and line-up assembly. Fabricate complete panels with integrated hinges. A hinge can be formed on the edge or in the middle of the sheet. Wilson Tool s one-hit hinge tool creates multiple half-knuckles that function as hinges. In one stroke, three or more half-knuckles are formed making this tool 900% more efficient than the traditional hinge. Because this tool does not wipe the material, the One-Hit Hinge tool can be used for hinges requiring larger diameter pins. Offset A standard fully curled knuckle is achieved with two sets of tools. An offset fully curled hinge requires three sets of tools. A one-hit half knuckle hinge uses one tool to form three or more half knuckles, allowing for larger diameter pins. The one-hit hinge tool can be used with plastic coated materials. Operating instructions with developed dimensions for easy programming are included with the tools. All tools are tested and inspected before shipping. Machine model Material thickness and type Drawing with dimensions - hole diameter or pin size Knuckle size One-Hit FORM-UP HINGE TOOL Tool Type Description Cat. No. Size II First Tool ( hits/form) Size II Second Tool ( hit/curl) 7 C A B PIN DIA. Tel: Tel: Tel: Fax: Fax: Fax:

25 PROGRESSIVE RIB APPLICATIONS A Progressive Rib from Wilson Tool produces quality stiffening ribs, programmable to any length. Rounded or flat top ribs are available (for best results, inside radius should be equal to or greater than the height). Run in nibbling mode (recommended incremental moves equal to the material thickness or less). When changing material thicknesses, replace the punch only. All tools are tested and inspected before shipping. Machine model Material thickness and type Drawing with dimensions (B and C) Specify center-to-center if more than one form exists on the sheet. A C THEORETICAL SHARP B A dimension programmable to any length Standard size: B = /8" (9.mm) C = /" (.7mm) Tel: Tel: Tel: Fax: Fax: Fax:

26 ROLLOVER TOOL APPLICATIONS Rollover and Hemming tools can be used in many applications such as hand holds, wire feeds and grommets. Rollover is achieved in three operations:. Pre-punch (developed by Wilson Tool free of charge). Form-up extrusion. Rollover Hemming is achieved in three operations:. Pre-punch (developed by Wilson Tool free of charge). Form-up extrusion. Flare & Flatten Reduces costly secondary operations and handling. All tools are tested and inspected before shipping. Machine model Material thickness and type Diameter or length and width (opening) Tolerance of opening Application (hand hold, wire feed, etc.) C B ROLLOVER TOOL Tool Type Description Cat. No. Size II Extrusion (nd hit) N/A Size II Rollover (rd hit) N/A For prepunch operation use standard round or shape set price from applicable standards catalog (st hit). Rollover Hemming Tel: Tel: Tel: Fax: Fax: Fax:

27 LANCE & FORMS APPLICATIONS Lance and Forms are used for a variety of applications, including air flow, decoration, location markers, shear tabs, wire harnesses and clip attachments. High-quality lance and forms are assured with Wilson s positive form and self-stripping design. Optima coating available for extending tool life. All tools are tested and inspected before shipping. Machine model Material thickness and type Drawing with dimensions and pattern if relief is required. A taper of per side should be added (if possible) to aid in stripping large station lance and forms. WITH STRIPPING W/O STRIPPING Tool Type Cat. No. Cat. No. Cat. No. Size I Size II Size II Single Bridge 9 Double Bridge N/A 07 - LANCE & FORM LESS THAN 90 LANCE AND FORM OF 90 Tool Type Cat. No. Tool Type Cat. No. Size II Size I Tel: Tel: Tel: Fax: Fax: Fax:

28 BRIDGE LANCE & FORMS APPLICATIONS Bridge type lance and forms can be used for shear stops, locators, card guides, dividers, ventilation and wire tie downs. The Wilson design gives a positive form, which ensures a high quality part. Special lead-ins available All bridge tools are made self-stripping Optima coating available for extending tool life. All tools are tested and inspected before shipping. Machine model Material thickness and type Length, width, height and center to center Drawing of pattern for relief Top, side and end views Form-up or Form-down 8 Tel: Tel: Tel: Fax: Fax: Fax:

29 EKO S FORM-UP / FORM-DOWN APPLICATIONS Single Double (concentric or tangential) Triple (concentric or tangential) Quad (concentric or tangential) Standard and special shapes Wilson Tool s Electrical Knockout (EKO) design has full stripping in both upper and lower units, which produce good quality, reliable knockouts every time. Single or multiple tools can be used to produce the desired number of EKO s for your requirements. Single Triple Most EKO s can be used in a small range of material thicknesses (example: - gauge/.-mm). Available in rounds, standard shapes and special shapes. All EKO s are made with integral collar All tools are tested and inspected before shipping. Machine model Material thickness & type Actual diameter Specify Standard. or Special tab location & size Specify center-to-center if more than one knockout exists on the sheet Quad Tangential Standard Wilson Tool Tab Location SINGLE EKO S Tool Type Description Cat. No. Size II Round EKO Size II Shaped EKO 89 DOUBLE EKO S Tool Type Description Cat. No. Size II Round EKO 7 Tel: Tel: Tel: Fax: Fax: Fax:

30 HALF SHEAR / ROOFTOP HALF SHEAR Half Shear APPLICATIONS The Half Shear from Wilson Tool is an easy-to-use tool that allows you to put in shear buttons and spot welding locators to the accuracy of your punch press. Round Half Shears make excellent locators for angular shearing. Rooftop Half Shears give you greater height protrusion compared to a standard half-shear when using thinner material. Rooftop Half Shear Available for Form-up or Form-down applications. Rooftop half shear gives you greater height protrusion from the metal which aids in picking up the locator on the sheet. Rooftop half shears have approximately a gauge material thickness range. All tools are tested and inspected before shipping. Machine model Material thickness and type (or range) Diameter or shape (on top of sheet) Specify center-to-center if more than one exists on the sheet Shaped Half Shear Half Shear Rooftop Half Shear A A 0 Tel: Tel: Tel: Fax: Fax: Fax:

31 SCRATCH TOOL APPLICATIONS A Scratch form can be used for spot welding locators, locators for angular shearing and shear stops. Punches a range of material from.0 [.9mm] to. [.8mm] Height of the stop is.00 [.mm] to.00 [.8mm] Tool is designed with relief for.00 [.7mm] centers Machine model Material thickness and type Specify top of sheet scratch or bottom of sheet scratch TOP OF SHEET VIEW.0.08 [0.] C/L of Tool.08.0 Die Pin C/L of Tool BOTTOM OF SHEET VIEW Tel: Tel: Tel: Fax: Fax: Fax:

32 LOUVERS & PROGRESSIVE LOUVERS APPLICATIONS Louvers are used in a variety of industry applications that require airflow; Electrical enclosures, HVAC, and food service equipment. Lower costs with replaceable inserts that can be converted to different size Louvers. Optima coating provided on cutting and forming inserts to extend tool life. All tools are tested and inspected before shipping. Machine model Material thickness and type Drawing with dimensions (A, B, C, D, and E) REPLACEMENT PARTS Tool Type Description Cat No. Size II Cutting Blade N/A Size II Forming Insert N/A Standard sizes have Optima cutting and forming inserts. PROGRESSIVE LOUVER APPLICATIONS The progressive design produces various length louvers to give flexibility using one tool. Program any length louver. Run in nibbling mode (recommended incremental moves equal to the material thickness or less). Lower costs with replaceable inserts that can be converted to different size Louvers. Tool is made with integral collar STANDARD SIZE Tool Type B C D Cat. No. Size II.7 [.00mm].97 [.0mm].787 [0.0mm] 00 For Progressive Louvers: A dimension is programmable to any length. Form length on first full hit is approximately -/" (7mm) long. Tel: Tel: Tel: Fax: Fax: Fax:

33 THREAD FORMS APPLICATIONS A Thread Form from Wilson Tool is a great solution for eliminating secondary operations and supplemental hardware where a threaded hole is required. Reduces costly hardware and assembly time Pre-punch information provided. Coining is included in the design of the tool when recommended material thickness is exceeded. Optima coating is available to extend tool life. All tools are tested and inspected before shipping. Machine model Material thickness and type Thread size and type THREAD LOOP APPLICATIONS A Thread Loop is a great solution for eliminating secondary operations and supplemental hardware where a threaded hole is required. Allows significant reduction in manufacturing time, supplemental hardware and assembly time. The Wilson design gives a positive form, which ensures a high quality part. Reduces costly hardware and assembly time. Optima coating is available to extend tool life. All tools are tested and inspected before shipping. Machine model Material thickness and type Number of thread loop tabs Width of tab Diameter of opening or screw size and type Drawing if possible Tel: Tel: Tel: Fax: Fax: Fax:

34 CLUSTER TOOLS APPLICATIONS Cluster tools are used for air ventilation, drains and filters. The Cluster tool is the most cost effective method to manufacture perforated patterns. Cluster piercing is ideal for applications where tight tolerance is required on the hole pattern. Saves on machine punching time and costly tool maintenance. Holds tight tolerance from hole to hole. Available in rounds, standard shapes, special shapes or any combination required. Solid designed punch or replaceable insert style available on any hole size, shape and pattern. The replaceable insert style provides additional cost savings with replaceable inserts. The added benefit is the ability to change the cluster pattern, size and shape by purchasing only the punch tip, inserts, die and stripper. The solid style cluster tends to be less expensive and can have a shorter lead time. Progressive clusters can be designed to finish your part complete all within one tool: pierce and blank, or pierce, form and blank. Optima coating available and recommended for extending tool life. Machine model Material type and thickness or range Number of hole clusters Straight or staggered pattern Center-to-center dimensions Replaceable or Solid design Tel: Tel: Tel: Fax: Fax: Fax:

35 LETTER STAMPS FORM-UP / FORM-DOWN APPLICATIONS Letter Stamps eliminate secondary handling costs and ensures consistent marking. A letter stamping tool is a perfect solution for permanently marking and displaying company names, serial numbers, or part numbers. Reduces the number of tools needed to mark parts. Eliminates secondary stamping operations. Form Down Letter Stamp punches made with integral collar. Interchangeable punch tip provides cost savings and flexibility to change character size by purchasing only a punch tip and characters. Form-Up Letter Stamp tools made with brush inserts to reduce sheet marking. Machine model Material thickness and type Size character, number of rows, number of characters per row LETTER / NUMBER STAMP TOOL Tool Type Description Cat. No. Size I Form-Down Letter Stamp Row 09 Size II Form-Down Letter Stamp Rows 00 Size II Form-Up Letter Stamp Row 0 Size II Form-Up Letter Stamp Rows 0 Note: Multiple rows available upon request. NO. OF CHARACTERS POSSIBLE IN SINGLE/DOUBLE ROW LETTERSTAMP TOOL / / /8 / / /8 CHARACTER SIZE.8mm.8mm.7mm.7mm.mm 9.mm MAX CHARCTER/ROW Tel: Tel: Tel: Fax: Fax: Fax:

36 MULTI-SCRIBE APPLICATIONS The Wilson Multi-Scribe is ideal for both sheet scribing and dot-matrix marking on a wide range of materials. Unique designs and logos can be achieved just by programming. Complete Kit Includes: Punch & Die Assembly (Assembled with 0 diamond and red medium pressure spring).»» - Yellow Light Spring»» - Green Heavy Spring»» - 0 Diamond Insert»» - 90 Carbide Insert»» - mm Hex Wrench»» - Set of User Instructions,, Use for sheet scribing or dot-matrix marking Works on a range of materials. Variable scribe depth. Design allows for consistent mark depth. Long lasting diamond tip. Won t deform the material or mark the underside of the sheet. TRUMPF SIZE MULTI-SCRIBE Description Cat No. Price Trumpf Multi-Scribe Kit (includes all inserts) 0 Carbide Insert 0º Diamond Insert 0º Diamond Insert Plastic Scribe Die Insert 89 O-Ring ( P.D x /) 8 Machine model Material thickness and type Tel: Tel: Tel: Fax: Fax: Fax:

37 STAMPING APPLICATIONS Stamping the top or bottom of the sheet is the perfect solution for permanently displaying company names, serial numbers, symbols, and product or company logos. Ground Symbols are widely used in the electrical industry. Dash tools can be used to V notch the sheet to aid in bending, create numbers and letters, and location marks on a sheet. Ground Symbols are available in stock sizes, form-down or form-up. Dash tools are available in form-down or form-up. Dash tools are available in various lengths or can be run progressively. Dash tools can be used to create numbers or letters. All form-up tools are designed self-stripping to prevent sheet marking and tool wear. Logos stamps and other special stamps can be manufactured easily when an electronic file is provided. Machine model Maximum material thickness and type Length of dash Size of ground symbol (stock or non-stock) Electronic file for logos Form-up or Form-down DASH TOOL Tool Type Size I GROUND SYMBOL Tool Type Size I W/Circle Size I W/O Circle.7 [9.] GROUND SYMBOL STOCK DIMENSIONS.7 [9.] O [.7].0 [.9].87 [.7].0 [.9] [ O.70].0 [.9]. [.8]. [.8].0 [.9]. [.8]. [.8].0 [.].0 [.] Tel: Tel: Tel: Fax: Fax: Fax:

38 ROLLING DEBURR APPLICATIONS The Wilson Tool De-Burring tool eliminates the secondary operation of removing burrs from your parts. Fast and efficiently de-burrs your parts while on the turret. Eliminates costly secondary operation. Coins a small chamfer on the cut edge top and bottom of sheet. Can be used to de-burr nested parts. Adjust ball pressure without disassembling the tool. Machine model Material thickness and type OPTI-BEND APPLICATIONS The Wilson Opti-Bend allows you to achieve exceptionally high bends up to 90 in your punch press, eliminating costly time-consuming secondary operations in a press brake. Pre-punch Performs 90º bends on a punch press with neutral pull on the sheet (won t pull out of clamps). Special rotating cam design minimizes sheet marking on soft or high polished materials. Available in single hit or progressive styles. Possible to achieve º over bend. Can be run on a small range of material. Opti-bend Machine model Material thickness and type 8 Tel: Tel: Tel: Fax: Fax: Fax:

39 TAPPING TOOL APPLICATIONS The Tapping tool allows you to create high precision threads at any programmed location on the sheet. Available in imperial and metric sizes. Works on a wide range of material. Stock size pitch inserts and taps are available for fast delivery. A complete instruction manual sent with each tapping kit. Extruded Hole Shown Machine model Material thickness and type ZIP-TECH APPLICATIONS Our Zip-Tech lance and form tool fabricates snaps to join metal parts together, eliminating time-consuming and labor intensive welding and grinding operations, spot-welding or other fastening methods. Zip-Tech Lance is achieved in three operations:. Pre-punch round hole. Pre-punch T-shape hole. Zip-Tech Lance and Form Different types of materials of the same thickness can be joined together. Machine model Material thickness and type Tel: Tel: Tel: Fax: Fax: Fax:

40 WILSON WHEEL FAMILY APPLICATIONS ROLLING RIB The Wilson Wheel family of products offers you flexible, high speed production of slits, ribs and offsets on a wide range of materials with virtually no burrs or nibble marks. ROLLING OFFSET ROLLING SHEAR High speed equal to programmed table travel speed. Create curves, arcs and circles Virtually no burrs or nibble marks on the sheet. Eliminate scrap with the rolling shear and pincher. Replacement forming wheels available. Works on a wide range of material. Wheel tools can start or end anywhere on the sheet. Stock sizes available for fast delivery. A complete instruction manual sent with each tool. ROLLING PINCHER Machine model Material thickness and type ROLLING FLARE 0 Tel: Tel: Tel: Fax: Fax: Fax:

41 SPECIAL SHAPES -WAY IUS TOOLS - STANDARD SIZES IUS INCHES/MM DIM. INCHES/MM DIM. INCHES/MM DIM. INCHES/MM.0 [.8].00 [.8].0 [.].0 [.8].09 [.9]. [.9].0 [.].09 [.9]. [.8]. [.8].0 [.]. [.8]. [.9].70 [.9].0 [.]. [.9].88 [.78].70 [.78].0 [.].88 [.78].0 [.].87 [.].0 [.].0 [.]. [7.9].000 [7.9].0 [.]. [7.9].7 [9.]. [9.].0 [.].7 [9.].00 [.7].0 [.7].0 [.].00 [.7] INVERTED DIAMOND Tel: Tel: Tel: Fax: Fax: Fax:

42 SPECIAL SHAPES GROUP A Note: Special Considerations May Alter Price and Lead Time S S -SA S S7 S S9 S SA S0 S S9 S S9 S8 S9L Flat 7 S9W S97 S00 S0 S0 S0 Tel: Tel: Tel: Fax: Fax: Fax:

43 SPECIAL SHAPES GROUP A QTY OF SIDES S0 S08 S09 S0 S QTY OF SIDES QTY OF SIDES 8 7 S S S S S 7 7 S S S S S7 (X) DIA (T.S.) (X) S70 S8 SQF PN RTF Tel: Tel: Tel: Fax: Fax: Fax:

44 Tel: Tel: Tel: Fax: Fax: Fax: GROUP B S S0 S 7 Quanity of Tabs () S S S S S S7 S8 (8X) (X) (X) S9 7 S0 S S 7 S S0 (X) DIA S S (X) (8X) S9A (X) (8X) DIA S9B SPECIAL SHAPES

45 SPECIAL SHAPES GROUP B DIM 8 (X) DIM DIM DIM DIM DIM DIM 7 DIM S S SA S7 S S S S S S (X) (X) (X) DIA 7 S S S7 S8 S0 (X) (X) QTY OF TABS S S S S79 S8 Tel: Tel: Tel: Fax: Fax: Fax:

46 SPECIAL SHAPES GROUP B QTY OF SLOTS S8 S8 S87 S88 S9 8 9 QTY (TS) QTY OF LOBES QTY OF ENDS 7 S9 S S S S7 9 8 QTY OF TIPS QTY OF ENDS 7 QTY OF TABS S8 S9 S0 S S 7 QTY OF SLOTS (TYP) (X) (TYP) QTY OF TABS DIA (X) S7 S8 S SA S Tel: Tel: Tel: Fax: Fax: Fax:

47 SPECIAL SHAPES GROUP B (TYP) 8 QTY OF TABS () S8 S9 S7 S7 7 (8X) (X) (X) S7 (X) S7 DIA DIA S77 (X) (8X) S79 QTY OF WEBS GROUP C Any complex D shape ordered with a DXF file will be priced as a B Group. Electronic file will be validated at the time of ordering. Tel: Tel: Tel: Fax: Fax: Fax:

48 SPECIALS - LARGE DIAMETER HOLE PUNCHING Machines with Rotation When a hole larger than the capacity of the machine is required, Rotation machine users have three options. All three options give good quality holes, virtually free from any scallop marks associated with a nibbled hole using a round punch. Tool Shape S Tool Shape S Tool Shape S Punching Pattern Punching Pattern Punching Pattern FIGURE FIGURE FIGURE Figure : This tool is designed so that all the scrap material is removed through the die, thus eliminating the need to stop the machine to remove waste material. You may have FOUR different radii with this tool. Non-Rotation Machines Figure : This type of tool is used by slitting around the diameter required and removing the material at the center. The advantages with this design are that fewer hits are required, you may punch round blanks, using the inside radius or round holes, using the outside (or both). Figure : This design is for use as Figure, but with square ends, half circles etc., may be produced. When trying to punch a larger hole than the diameter of the largest station in the machine, our recommendation is a four-sided punch as shown below. The tool is designed so that each of the four faces are equivalent to /8 of the circle desired. The circle is then obtained by using the two punches, one keyed at 0 and the other at, and making the four hits with each punch (see punching pattern). Your hole is obtained with the minimum number of hits and no scalloping. As an extra bonus the tool is designed so that no material is left to be removed from the center of the circle. TOOL SHAPE PUNCHING PATTERN 8 Tel: Tel: Tel: Fax: Fax: Fax:

49 Increase Grind Life with Trumpf Style Dies Cut your costs and save valuable time by increasing your grind life up to 0% with Wilson s Trumpf GL (Grind Life) dies and die plate. These products enable you to shim your dies up to.mm instead of the current.0mm maximum. GL Die The radius profile of the Trumpf GL die has been changed to allow up to.mm of grind life with the standard die plate, or.mm with the GL die plate, while still having radius left to allow the sheet to flow over the top of the die. GL Die Plate The Wilson GL die plate key allows for the die to be shimmed up to.mm while still maintaining key engagement. The GL size die plate key contains a spring loaded ball plunger to better secure the dies, and is coated with Wilson Tool s Wearbeater coating for easy identification. The key is available separately and is compatible with standard die plates. Contact your Wilson Tool Sales Engineer for more information on the Trumpf GL style dies, or call Tel: Tel: Tel: Fax: Fax: Fax:

50 NOTES 0 Tel: Tel: Tel: Fax: Fax: Fax:

51 wilsontool.com is your online source for the latest news and information from Wilson Tool. Available in seven languages, wilsontool.com is a great resource for all of our customers around the globe. Our e-newsletters not only keep you up to date on the latest product and company news along with workshop and class information, but each month we provide a solutions-based article to improve performance and productivity in your shop. Register at wilsontool.com e-business Center Request a quote. Place an order. Review your account history. Track a shipment. Even download special tool drawings to easily program your machines. hours a day, 7 days a week. Log-on or register your account at wilsontool.com/ebiz. YouTube Wilson Tool s YouTube channel contains many videos featuring product demonstrations showing our tooling in action. Visit us at Tel: Tel: Tel: Fax: Fax: Fax:

52 WILSON TOOL INTERNATIONAL WORLD HEADQUARTERS Wilson Tool International - United States Tel (Free): Tel: Fax (Free): Fax: sales@wilsontool.com NORTH AMERICA Wilson Tool - Punching and Stamping Division Tel: Fax: Wilson Tool - Press Brake Division Tel: Fax: bending@wilsontoolcanada.com Wilson Tool - Tel: (8) Fax: (8) SOUTH AMERICA Wilson Tool - Argentina Tel: ventasargentina@wilsontool.com EUROPE / MIDEAST / AFRICA Wilson Tool - United Kingdom Tel (Free): Tel: Fax (Free): Fax: or sales@wilsontool.eu.com Wilson Tool - Germany Tel (Free): Tel: Fax (Free): Fax: verkauf@wilsontool.eu.com Wilson Tool - Denmark Tel (Free): Tel: + 99 Fax (Free): Fax: sales@wilsontool.dk Wilson Tool - France Tel: + (0) 7 80 Fax: + (0) ventes@wilsontool.eu.com Wilson Tool - South Africa Tel: Fax: simon.penney@wilsontool.com Toolspress - Italy Tel: / 8077 Fax: info@toolspress.com Milling Ferramentas - Brazil Tel/Fax: vendas@milling.com.br CHINA / PACIFIC RIM Wilson Tool - China Tel: Fax: sales@wilsontool.cn P09C 0 0 Wilson Tool International b Tel: Tel: Tel: Fax: Fax: Fax: