Cutters. INOTEC GmbH We make your construction site easier!
|
|
- Sibyl Gallagher
- 6 years ago
- Views:
Transcription
1 INOTEC GmbH We make your construction site easier! inocut Cutters Cutters for fast and precise cutting of ETICS insulation boards and mineral wool insulation material. 1
2 2 Cutters make your work easier!
3 inocut ic127 The handy and lightweight hot wire cutter for ETICS insulation boards Advantages at a glance Multi-ply, environmentally-friendly painted Multiplex plywood with scaling Push-button (transformer for short-time operation) Swivel cutting bracket up to 45 Depth stop for rebating, grooving or separating Swivel board support up to 60 Versatile and extendable The handy and lightweight hot wire cutter inocut ic127 is a practical and precise high-end device. It is used as a standing unit. The device can also be attached to the handrail with the integrated tilt protection. The swivel insulation board support also holds thick insulation boards firmly in place. Areas of application For all conventional cuts in polystyrene rigid foam panels: Straight cuts, diagonal cuts, groove cuts, separating cuts and much more. (See table on page 8) Technical data Operating voltage 230 V / 50 Hz Cutting length 127 cm Cutting depth at cm Cutting depth at cm Dimensions: approx. 1,850 x 415 (L x W x H) x 150 mm* Weight approx kg * Dimensions without support strip Basic module Scope of delivery inocut ic127: Base plate Swivel cutting bracket Power supply unit Connecting cable Left support strip Swivel base Railing fastening Operating instructions Accessories from page 9 3
4 inocut ic127 Pro The innovative hot wire cutter for cutting ETICS insulation boards Benefits at a glance Telescopic cutting bar length and depth for space-saving device insertion on the scaffolding (only 29 cm bracket depth) With wall-clearance edge for leaning the device on the building wall Continuous operation with ON/OFF switch and status indicator With integrated reserve wire spool for easy and toolfree wire change Top and bottom mitre display Horizontally and vertically arranged supports ensure optimal plate guidance The space-saving double-telescopic inocut ic127 Pro hotwire cutter with adjustable cutting bracket length (vertical) and cutting bracket depth (horizontal) can be used both as a standing and as a hanging device (with optional railing holder) perpendicular to the scaffold. The inocut ic127 Pro revolutionises the thermal cutting of ETICS rigid foam panels on the construction site. Areas of application For all conventional cuts in polystyrene rigid foam panels: Straight cuts, diagonal cuts, groove cuts, separating cuts and much more. (See table on page 8) Technical data Operating voltage 230 V / 50 Hz Cutting length cm Cutting depth at cm Cutting depth at cm Dimensions: approx. 1,550/1,890 x (L x W x H) 310 x 150 mm* Weight approx kg * Dimensions without support strip Basic module Scope of delivery inocut ic127 Pro: Base plate Freestanding support Fold-out feet with extendable foot widening Telescopic and swivelling cutting bracket Left and right support strip Connecting cable Power supply unit Plastic case Operating instructions Accessories: see page 9 4
5 inocut ic128 Robust, handy and versatile cutting device for ETICS insulation boards Benefits at a glance Multi-ply, environmentally-friendly painted Multiplex plywood with scaling Continuous operation with ON/OFF switch Swivel cutting bracket up to 45 Swivel board support for mitre cuts up to 45 1 depth limiter for separating cuts Belt with snap lock for assembly on the handrail Freestanding support included in delivery The robust inocut ic128 with hot wire cutter and pushbutton operation is versatile and is thus the ideal cutting device for the construction site. The inocut ic128 revolutionises the thermal cutting of ETICS rigid foam panels on the construction site. Rafter beam and corner cutouts for window sills are easily achievable with the optional corner cutter. Areas of application For all conventional cuts in polystyrene rigid foam panels: Straight cuts, bevel cuts, mitre cuts, diagonal cuts, and much more. (See table on page 8) Technical data Operating voltage 230 V / 50 Hz Cutting length 128 cm Cutting depth at cm Cutting depth at cm Dimensions: approx. 1,850 x (L x W x H) 415 x 150 mm* Weight approx kg * Dimensions without support strip Basic module Art.-Nr Scope of delivery inocut ic128: Base plate Swivel cutting bracket Left and right support strip Power supply unit Connecting cable Freestanding support Swivel base Railing fastening Operating instructions Accessories: see page 9 5
6 inocut icm135 The universal cutter for insulation material with a cutting depth of up to 30 cm Benefits at a glance Short-stroke parallelogram for user-friendly operation Preset insulation thickness Double-sided forced guidance for electric saw blades or unrestricted handsaws Swivel cutting bracket up to 45 Wide foot profile for excellent device positioning Wall support, making it possible to work on the scaffold without an independent support The new inocut icm135 makes cutting all mineral wool and glass wool child s play. The new cutting device for manual or power cutting has large, swivelling board supports on both sides. Exact mitre cuts, as well as straight, angular and diagonal cuts can be carried out with the toothed handsaw included in the scope of supply or, alternatively, performed quickly and effortlessly with an electric, cordless Milwaukee sabre saw. Areas of application Mineral wool, glass wool, mineral fibreboard, rolls of clamping felt (only with optional rolls and stands for sheet material), and much more. (See table on page 8) Technical data Cutting length 135 cm Cutting depth at cm Cutting depth at cm Dimensions: 1,800 x 350 x (L x W x H) 420 mm* Weight approx. 21 kg * Dimensions with support strip Scope of delivery inocut icm Base plate Left and right support strip Removable foot strip Short stroke parallelogram Right height-adjustable swivel arm Toothed handsaw 500 mm, without chamfer Magnet for the handsaw Park holder for electric sabre saw Operating instructions Accessories: see page 9 6
7 inocut icm127 Pro The universal cutter for insulation material with a cutting depth of up to 30 cm Benefits at a glance Short-stroke parallelogram for user-friendly operation Preset insulation thickness Positive guide for electric cordless sabre saw Swivel cutting bracket from -5 to +45 Integrated double folding foot with an extra long foot profile for optimal device positioning even with heavy plates Large swivel plate supports on both sides for precise and individual oblique cuts Wall support, making it possible to work on the scaffold without an independent support Telescopic freestanding support The new inocut icm127 makes cutting all commercially available insulating materials child s play. The new cutting device for electric cutting has a universal positive guidance for the saw. Exact mitre cuts, as well as straight and diagonal cuts with a mitre can be performed effortlessly and quickly with the electric cordless sabre saw included in the scope of supply. Technical data Cutting length 127 cm Cutting depth at cm Cutting depth at cm Dimensions: 1,820 x 350 (L x W x H) 420 mm Weight approx. 24 kg Areas of application Corkboards, hemp boards, mineral wool, foam glass and much more. (See table on page 8) * Dimensions without support strip Scope of delivery inocut icm127 Pro Art.-Nr Base plate Left and right support strip Short stroke parallelogram Left and right height-adjustable swivel arms Folding foot Telescopic freestanding support Guided block with hooks for fixing a Milwaukee sabre saw Milwaukee sabre saw with 2 batteries (4.0 Ah Li-Ion), fast charger, 2 saw blades (450 mm) Operating instructions Accessories: see page 9 7
8 Technical data inocut ic127 inocut ic127 Pro inocut ic128 inocut icm135 inocut icm127 Pro Operating voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz - - Cutting length 127 cm cm 128 cm 135 cm 127 cm Cutting depth at cm 30 cm 30 cm 8-30 cm cm Cutting depth at cm 20 cm 20 cm 20 cm 18 cm Dimensions approx. 1,850 x approx. 1,550/1,890 approx. 1,850 x approx. 1,800 x approx. 1,820 x (L x W x H) 415 x 150 mm x 310 x 150 mm 415 x 150 mm 350 x 420 mm 350 x 420 mm Weight approx kg approx kg approx kg approx. 21 kg approx. 24 kg Areas of application Polystyrene rigid foam panels inocut inocut inocut inocut inocut ic127 ic127 Pro ic128 icm135 icm127 Pro Mineral wool/glass wool Phenolic resin panels Polyurethane panels Corkboard Foam glass panels Hemp boards Rolls of clamping felt Potential cuts Straight cuts inocut inocut inocut inocut inocut ic127 ic127 Pro ic128 icm135 icm127 Pro Diagonal cuts Groove cuts Separating cuts Mitre cuts Diagonal cuts with mitre joints Layered cut Layered cuts with mitre joints Layered groove cuts Round cuts Cut-outs 8
9 Accessories inocut icm127 Pro inocut icm135 inocut ic128 inocut ic127 PRO inocut ic127 Corner cutter with rail, transformer and pouch for inocut ic127 PRO Rafter cutouts, corner cutouts in window sills, plasterboard, lintels, etc swivel Degree scale and slider for diagonal cut repetition Tool-free, fast wire change thanks to integrated reserve wire spool Separate transformer With nylon pouch P Corner cutter for inocut ic128 Rafter cutouts, corner cutouts in window sills, plasterboard, lintels, etc swivel Degree scale and slider for diagonal cut repetitions Tool-free, fast wire change thanks to integrated reserve wire spool Separate transformer With nylon pouch P Spare wire with a diameter of 0.65 mm Spare wire with a diameter of 0.65 mm for inocut 127 PRO Length: 20 m 20 m P P P Spare wire with a diameter of 0.50 mm for inocut ic127 PRO and ic128 corner cutter Length: 6 m P P Railing holder with assembly kit for inocut ic127 PRO with assembly kit Railing holder with fixing bar. Bar remains on the device after assembly P Freestanding support with strut for inocut ic127 Folding support with strut. Remains on the device after assembly P Right support strip for inocut ic127 Swivel support strip with additional board guidance. Remains on the device after assembly Freestanding support with strut for inocut icm135 For freely positioning the icm135 cutter P P Aluminium transport case for inocut icm135 and ic127 Robust case with wheels P P 9
10 Accessories Serrated handsaw (length 500 mm) for icm135 suitable for rock wool and glass wool inocut icm127 Pro inocut icm135 inocut ic128 inocut ic127 PRO inocut ic P Toothed handsaw without chamfer (length 500 mm) for icm135 suitable for insulation material 12 volt Milwaukee cordless sabre saw High-performance 12 volt compact sabre saw. The saw has a cutting depth of up to 450 mm Technical data: Battery: 12 V / 2 Ah Li-Ion, sawing height: 16.5 mm, weight (with battery): 1.2 kg Scope of delivery: 2 batteries, fast charger, 2 universal saw blades (450 mm), with case 18 volt Milwaukee cordless sabre saw High-performance 18 volt compact sabre saw. The saw has a cutting depth of up to 450 mm Technical data: Battery: 18 V / 4 Ah Li-Ion, sawing height: 20.0 mm, weight (with battery): 2.6 kg Scope of delivery: 2 batteries, fast charger, 2 universal saw blades (450 mm), with case Replacement saw blades for Milwaukee cordless sabre saw Length 450 mm, corrugated for Milwaukee sabre saw Guide block with hooks for Dewalt or Bosch sawing machine P P P P P P P P Stands for rolls and boards for icm 135 For processing rolls of clamping felt P 10
11 Our service makes your work easier! 11
12 Service Services from INOTEC Silo maintenance Silo technology functional and return testing Visual inspection Checklist-based inspection Emptying residual quantities in agreement with the customer Checking and, if necessary, replacing mechanical and electrical components Checking and, if necessary, replacing the water fitting Drawing up a test log and, if necessary, BGV A3 testing (DGUV V3) Construction site applications Customer fault reporting Providing support over the phone during the troubleshooting process, or if necessary deploying a service technician Service technician travels to the construction site with the service vehicle Rectifying faults, if this can be done on the construction site Creating assembly certificates with the following information: machine / travel time / kilometres / fault description / record of the spare parts / date / signature Electrotechnical BGV A3 testing (DGUV V3) Testing mobile equipment pursuant to the Ordinance on Industrial Health and Safety VDE Extensive visual inspection Measuring and determining the permissible values Separating work equipment with safety defects and discussing how to proceed with the customer Attaching the inspection plate if the inspection has been passed Drawing up a legally binding test report Defining the inspection intervals with the customer Making an inventory of the work equipment, if requested 12
13 Maintenance of third-party and our own devices Visual inspection and cleaning Resetting / adjusting, lubricating and preserving Replenishing or replacing the operating fluids Replacing wearing parts (e.g. filters, seals, etc.) as scheduled, if their expected service life is clearly sooner than the next maintenance interval. Recording, procuring and replacing wearing parts Should it be determined during the maintenance process that parts are defective, the customer is contacted and an agreement reached on how to proceed. If the customer would like a repair, they are sent a cost estimate. The parts are then procured and replaced accordingly. Finally, a functional test and, if requested by the customer, a BGV A3 test (DGUV V3) is performed. Repairs Checking Recording the parts to be replaced Sending a cost estimate to the customer If the customer decides to have the repair work carried out: Procuring the parts Replacing the parts Functional testing and DGUV V3 testing, if necessary If the customer decides not to have the repair work carried out: Assuming the costs incurred with the cost estimate APR testing Extensive visual inspection Testing to ensure safe working conditions Visual inspection pursuant to BGV D 15 on devices up to 500 bar Electrically testing the devices pursuant to VDE Making an inventory of the work equipment, if requested Training courses and commissioning Explaining the machine technology Offering advice on potential uses and applications Explaining the various machine functions Safety notices Practical tips Maintenance notices Rectifying faults 13
14 Rental fleet Don t buy, rent! Airless devices Small silo* Continuous mixer Do you need a mixing pump or another machine for one-off use on your construction site? Would you like to purchase a machine but check the efficiency and performance first? Don t buy, rent! Then you re in the right place with the INOTEC machine rental fleet! Give us a call. We would be happy to provide you with a quote. Delivery pumps Mixing pumps * with integrated 400 V continuous mixer and 400 V delivery pump
15 Locations Your sales partner (English language) INOTEC GmbH (Headquarter) Daimlerstraße Waldshut-Tiengen Germany Phone / Fax / j.tetling@inotec-gmbh.com Wherever you are, we re there, too.
16 Product range delivery pumps Mixing pumps Mixers Delivery systems Silo technology OWC technology Airless devices Cutters Grinders One-handed guns Waste water systems Floor processing Pneumatic hammers Compressed air / compressors Heaters / air dehumidifiers / high-pressure cleaners Power tools / electrical appliances INOTEC GmbH Daimlerstraße 9-11 D Waldshut-Tiengen Tel.: /
STANDARD S STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. VERSATILE PRECISE SOLID Universal vertical sawing technology
WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD COMPACT VERSATILE PRECISE SOLID Universal vertical sawing technology UNIVERSAL VERTICAL SAWING TECHNOLOGY The Swiss label symbolises quality, safety,
More informationMY NEW WA 80. FEATURES, OPTIONS.
MY NEW WA 80. FEATURES, OPTIONS. 2 ALTENDORF WA 80 Two models, one promise: Performance, you can count on. WA 80 TE Page 4 WA 80 X Page 6 Altendorf WA 80 TE with motorised rise / fall and tilt adjustment
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Rotary Microtome CUT 4062 / CUT 5062 / CUT 6062 CUT 6062 illustrated above INS1000GB 2012-01-06 Instructions CUT4062 / CUT 5062 / CUT 6062 2 CONTENTS 1. INTENDED USE... 4 2. SYMBOLS...
More informationWOOD PROCESSING TECHNOLOGY
WOOD PROCESSING 152 WOOD PROCESSING THEY HAVE ALREADY CONVINCED OVER 1 MILLION PROFESSIONALS WORLD-WIDE: METABO PORTABLE SAWS No matter which type of wood you are working with: The Metabo saw range offers
More informationPart 1: Operating Instructions Cl. 271 to 274
Contents Page: Preface and General Safety Notes Part 1: Operating Instructions Cl. 271 to 274 1. Product Description 1.1 Short Description and Proper Use..................... 5 1.2 Technical Data................................
More informationRobert Bosch GmbH. Wall organiser
Wall organiser The organisational talent Wall organiser Say goodbye to messiness! The wall organiser is the ideal place to store everything that tends to lie around. 1 Introduction Wardrobes, drawers and
More informationPerfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
More informationPBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT
Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 Parts up to 8 meters wide, of any length
More information4D - high-end sawing centre CONTROL EVOLUTION STANDARD COMPACT. The Universal Class for Vertical Panel Saws
4D - high-end sawing centre CONTROL EVOLUTION COMPACT The Universal Class for Vertical Panel Saws Experience, skill, precision Tried-and-tested over decades, it can almost be considered the VW-Beetle of
More informationPBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT
Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 3 Parts up to 8 meters wide, of any length
More informationOperating manual. TruTool N 500 (1A1) english
Operating manual TruTool N 500 (1A1) english Table of Contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Correct use...7 2.2 Technical
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationFlipchart Easels and Rail Systems
Flipchart Easels and Rail Systems 94 Tripod Easels 95 Mobile Easels 96-97 Coloured Ultimate Easels 98 Conference Pro Easel 99 Combi Mobile Easel 100-101 BusyRail 102 Trapease Flipchart Hanger 102 Flipchart
More informationOperating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationThis installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format.
1.00 - Introduction This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format. Please note, each roof has been individually designed to meet specific
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationOperator's manual TruTool PN 130 (1A1)
Operator's manual TruTool PN 130 (1A1) english TruTool PN 130 (1A1) Table of Contents Table of Contents 1. Safety...4 1.1 1.2 General safety information...4 Specific safety information...5 2. Description...6
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationUNDERPINNERS CS 88 & CS 89 FOOT-OPERATED PNEUMATIC. Technical and User Manual. Version 1 au 12 / 01. Cassese / Communication
UNDERPINNERS CS 88 & CS 89 FOOT-OPERATED PNEUMATIC Technical and User Manual Version 1 au 12 / 01 Cassese / Communication CS88 / CS 89 - Technical and User Manual CONTENTS PAGE N INTRODUCTION ACCESSORIES
More informationPolished head, handles black atramentised. Polished head, dip-coated handles. Length mm
575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18
More informationprecision. On a mission of New Compact Generation Always the right choice the Bosch Compact Generation. The new jigsaws from Bosch.
Always the right choice the Bosch Compact Generation. On a mission of precision. The new jigsaws from Bosch. Easy Expert Universal New Compact Generation Easy Universal Expert NEW! The Compact Generation
More informationmodular/panel-built sauna kit
modular/panel-built sauna kit installation instructions Please immediately check for any hidden damage that may have occurred in shipping. If any damage is found you must notify the delivering carrier
More informationversatile! Unbelievably NEW!
Unbelievably versatile! NEW! New! The Cordless Multifunction Tool PMF 10,8 LI from Bosch. Unbelievably versatile: sawing, cutting, routing, sanding, scraping... No problem with the PMF 180 E and the new
More informationOperator's manual. TruTool N 200 (1A1) english
Operator's manual TruTool N 200 (1A1) english Table of contents 1. Safety...3 2. Description...5 2.1 Correct use...6 2.2 Technical data...7 3. Tool assembly...8 3.1 Changing the stroke rate...8 4. Operation...10
More informationfor all big jobs. Always the right tool More information. UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd
Robert Bosch Ltd Broadwater Park Denham Uxbridge Middlesex UB9 5HJ 1619GB5S17 UK Printed in Federal Republic of Germany Subject to technical alterations. No liability is accepted for printing errors. More
More informationASSIGNMENT 2. Textbook Assignment: 2-1. Levels are designed for which of the following purposes?
ASSIGNMENT 2 Textbook Assignment: "Levels," "Plumb Bulbs," "Scribers," "Squares," "Surface, Depth, and Height Gages," "Ring and Snap Gages and Gage Blocks," "Miscellaneous Measuring Gages," "Pliers and
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from WEINIG: FlexiRip is synonymous with flexible ripping The original Jrion from WEINIG stands for
More informationOPERATIONS MANUAL. Featuring:
OPERATIONS MANUAL Used for commercial, architectural and industrial sheet metal fabrication Featuring: Pro Brake System Pro Accessories Setting up your Pro Brake Using your Pro Brake Snap Stand Set up
More informationCreate cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
More informationIF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST
Set A Set B PFD60 Fire Door Kit FITTING INSTRUCTIONS IF INSTALLING ANY OF THE PORTMAN SELF CLOSING SYSTEMS, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS SUPPLIED WITH THE CLOSING SYSTEM FIRST SUGGESTED
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationFifth-wheel coupling JSK 38/50
Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/25 1 LT SK38C-3 English RevA Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationPRO Series Brakes Operating Instructions
PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,
More informationInstructions for Installation on a Pitched Roof LIGHTWAY optical tube LW 260, LW 320, LW 520, LW 760
Lightway, s.r.o. Registered office: Ledvinova 1714, 149 00 Praha 4 Offices: Za Humny 1054/4a, 161 00 Praha 6 tel.: 235 300 694, fax: 235 300 218 Company ID No.: 63669366, Tax ID No.: CZ63669366 Bank: KB
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationGardman Lean-to Greenhouse Assembly Instructions
Page 1 Gardman Lean-to Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free
More informationBand-Master ATS Nano Pneumatic Banding Tool Operating Instructions
Band-Master ATS 601-118 Nano Pneumatic Banding Tool CONTENTS 601-118 Overview... 3 Safety.... 5 Initial Tool Set-up... 5 Regulator assembly mounting... 5 Attach tool head to regulator.... 6 Operating instructions...
More informationInstallation Instructions
Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and
More informationINSTALLATION MANUAL 32273/1205 C C-403 GB - F - D - NL - ES - I - S - SLO
INSTALLATION MANUAL 32273/1205 C-402 - C-403 GB - F - D - NL - ES - I - S - SLO 1A 1B ENGLISH GENERAL INFORMATION The Cassette toilet is available in 2 types: C-402 Cassette toilet with built-in water
More informationInstallation Instructions
Installation Instructions Roof edge trim profile Series TAG multi-piece aluminium profile Front face height: 250-1050 mm supplied with patented 4F brackets as standard height-adjustable, horizontally moveable,
More informationInstruction Manual X97
Index Page Technical data... 2 Dimensions... 3 General description... 4 Selection of cutter... 5 Instruction for grinding... 5 Dimensions of bevel... 7 Bevelling angle... 8 Adjustment: Straight edge (Land)...
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationlindab we simplify construction LindabSandwichPanels Installation instructions PIR Panels
lindab we simplify construction LindabSandwichPanels Installation instructions PIR Panels Assembly instructions Before you start Check that the panel support structures are level. Position the packages
More informationELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS
ELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS 500 TS - 500 CD - 500 D2K Electronic double head cutting machine The double head cutting machines made by Pertici boast unique features in terms of build quality
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B PFD30 Fire Door Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors IF INSTALLING A TOUCH LATCH, PLEASE READ THE CORRESPONDING FITTING INSTRUCTIONS FIRST
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationinstallation instructions For Slider Casement Air Conditioners
installation instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationLog cabins. Pentagon log cabin models ASSEMBLY INSTRUCTIONS. Recommended tools Cordless screwdriver
ASSEMBLY INSTRUCTIONS Log cabins Pentagon log cabin models Recommended tools Cordless screwdriver Spirit level Screw clamp Pliers Tape measure Hammer Generally two persons are required for the assembly;
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More information- 4 - Fig. 3b. Fig. 1b. Fig. 2. Fig. 2b MT 300
MP 00 Manual 1 7 6 9 8 5 1 1 10 11 1 Fig. 1a Fig. 1b MT 00 Breite Buche Erle Pappel Balsa 0 0,5 0,8 0,8 0,8 max. Zustellung mm 0 0, 0,6 0,8 0,8 60 0, 0, 0, 0,8 80 0,1 0,1 0, 0,6 n Messerwelle = 6.000/min
More informationREGENCY TIMBER BUILDINGS
REGENCY TIMBER BUILDINGS TEL 01948 830460 UNIT 22 PENLEY IND EST, PENLEY.WREXHAM. LL13 0LQ 1 Garage fitting instructions Tools needed handsaw, hammer, Stanley knife with hook blade, tape measure, battery
More informationA Shell construction
A Shell construction A 4/2012 Content 1 BASE AND WALL ANCHORING 1.1 Base with mortar bed 1.2 Base with sill plate 1.3 Base with raised sill plate 1.4 Concrete base (mortar bed) 1.5 Concrete base (sill
More informationInsulating Aluminium Windows
Insulating Aluminium Windows The Problem Aluminium windows are great for low maintenance, but they re absolutely terrible for letting heat in and out, with the frames being very thermally conductive as
More informationNew ergonomic working height mm higher than Morsø-F.
Model F foot operated no need for a compressor or electricity the cutting waste drops into a waste chute the working procedure creates no dust 5 years warranty MORSØ-F cuts double mitre at 45 and single
More informationProcessing Centers. Venture 21/23
Processing Centers Venture 21/23 Venture 21 and Venture 23 Alongside versatile routing functions, the compact Venture 21 and Venture 23 processing centers offer a range of unique additional functions:
More informationPOWERMATIC PWBS-14 Bandsaw
POWERMATIC PWBS-14 Bandsaw The versatility of the bandsaw has made it a favorite of woodworkers for decades. The POWERMATIC PWBS-14 Bandsaw was designed to be rugged, accurate and to bring a surprising
More informationGRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
More informationProducing weld preparations is done in seconds
P.O. Box 5, NL 6580 AA MALDEN Th. WORTELBOER B.V. HOLLAND phone +31 24 358 65 14 fax +31 24 358 70 79 www.wortelboer.ws Producing weld preparations is done in seconds NEW MODELS 2011/2013 PBM PIPE END
More informationChapter M03: Tile Cutting Machines, Saw Benches, Joint Cutters and Vibratory Plates
Maschines and Accessories Chapter : Tile Cutting Machines, Saw Benches, Joint Cutters and Vibratory Plates Cutting Machines Tile Cutting Machines Core Drills Submersible Pumps Saw Benches Vibratory Plates
More informationV 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic. Panel rip and crosscut saws. It s the result that matters
V 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic Panel rip and crosscut saws It s the result that matters V 91 basic - 5,7 Touch-Screen Display of the current cutting height and input field
More informationsi 300 s nova manual, electronically programmable circular saws si 7500
si 300 s nova manual, electronically programmable circular saws si 7500 scmcircular saws The widest range of circular saws offering the market the latest and advanced technological solutions that different
More informationTaurean Sectional Garage Door INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN MAKE SURE THESE INSTRUCTIONS ARE READ AND UNDERSTOOD COMPLETELY. THESE INSTRUCTIONS ARE INTENDED FOR PROFESSIONAL GARAGE DOOR INSTALLERS. ALL REFERENCES ARE TAKEN FROM THE INSIDE LOOKING
More informationApril 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
More informationCIRCULAR SAWS. Production system for grinding tooth faces/tooth tops and side angles CC 355
CIRCULAR SAWS Production system for grinding tooth faces/tooth tops and side angles CC 355 / CIRCULAR SAWS // TOOTH FACES/TOOTH TOPS AND SIDE ANGLES MAXIMUM FLEXIBILITY AND PRODUCTIVITY IN THE MANUFACTURE
More informationSTABILA compact laser: For all professionals. For all finishing trades.
LAX 300 cross line plus plumb points laser NEW NEW LA-5P 5 point laser STABILA compact laser: For all professionals. For all finishing trades. A C C U R A T E. T O U G H. R E L I A B L E. E A S Y - T O
More informationCHAINSAW SHARPENER MODEL: ECSS-1
CHAINSAW SHARPENER MODEL: ECSS-1 Part No: 3402075 ASSEMBLY & INSTRUCTION MANUAL LS0409 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that
More informationASSEMBLY INSTRUCTIONS. Construction type approved Reg. no S819 F ENERGY AND SANITARY SYSTEMS
Heliostar 252 S4 and 218 S4 FREE-STANDING INSTALLATION vertical ASSEMBLY INSTRUCTIONS Construction type approved Reg. no. 011-7S819 F ENERGY AND SANITARY SYSTEMS Safety instructions Safety instructions
More informationSliding Door Kit
YOU MUST READ THIS DOCUMENT BEFORE YOU BEGIN TO ASSEMBLE THE DOOR KIT. Thank you for purchasing this GrowSpan door kit. When properly assembled and maintained, this product will provide years of reliable
More informationMX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationPRO Brake Operating Instructions
PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationRELIABLE. FULLY AUTOMATIC.
Powerful solutions passionate people RELIABLE. FULLY AUTOMATIC. THE KKS SERIES 400 NA 451 NA 463 NA FULLY-AUTOMATIC UNIVERSAL MITRING CIRCULAR SAWS > MADE IN GERMANY REQUIREMENTS MAY CHANGE WITH TIME.
More informationLine XMS the integrated machine concept
Line XMS the integrated machine concept New Products 2012/ II XMS the innovative item concept for integrated machine constructions. 6 Profiles XMS A stable frame for modular machines. Cutting-edge design
More information10 Easy-to-Build. Plywood Projects
10 Easy-to-Build Plywood Projects Ten shop projects ten sheets of plywood. These rock-solid essentials take just a couple hours to build and will help you make the most of the space in your shop. All content
More informationRepair manual. Fifth-wheel coupling JSK 38/50
Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/212 1 Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety requirements and must
More information580A Automatic Cable Tying Machine 580A
Automatic Cable Tying Machine 580A Contenido Regular Information...3 Technical parameters:...5 Operation Instruction....6 Trouble Shooting....8 Maintenance....9 After-sales Service...9 Safety Instructions....10
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationE N G L I S H GARDEN SHED. Assembly Instructions. Suitable for Models WITH VARYING DEPTHS
GARDEN SHED Assembly Instructions Suitable for Models 6' Wide 8' Wide 0' Wide WITH VARYING DEPTHS GI0003 November 0 INSTALLATION ADVICE It's Not That Difficult! The construction of your shed isn't as complicated
More informationS E L E C T I O N. Arm Curl. User manual
S E L E C T I O N T H E S T R E N G T H E V O L U T I O N User manual The identification plate of the and manufacturer, affixed behind the seat, gives the following details: A Name and address of the manufacturer
More informationOverlapping panel Cladding system made up of horizontal overlapping panels fixed on a wooden or metal wall-mounted framework.
facade Overlapping panel Cladding system made up of horizontal overlapping panels fixed on a wooden or metal wall-mounted framework. Specification and installation guide Presentation of the system VMZ
More informationCATALOG TOOL STEEL ELECTRIC
CATALOG TOOL STEEL ELECTRIC 1/26 BENDING MACHINES Biegeboy bending machine For bending panels with turned-up edges up to a turn-up height of 50mm. Very small radii are produced in several passes. 40 cm
More informationRev. 05/16 01 ACRYLIC INSTALLATION GUIDE
Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE Contents 1.0 Inspection 3 2.0 Storage 3 3.0 Handling 3 4.0 Planning & Preparation 3 5.0 Panels 4 6.0 Accessories 4 7.0 Tools & Fixings 4 8.0 Fitting Tips 5 9.0
More informationNEWS KNIPEX Quality Made in Germany
NEWS 2014 KNIPEX Quality Made in Germany Product videos KNIPEX Pliers Wrench XL Pliers and a wrench in a single tool The unique installation tool now also in 400 length. For opening widths up to 85 / 3
More informationmodular/panel-built sauna kit
modular/panel-built sauna kit installation instructions Please immediately check for any hidden damage that may have occurred in shipping. If any damage is found you must notify the delivering carrier
More informationTriplematic User manual
Triplematic User manual Original instructions Document no: DOC-101. Issue: 1 Date: March 2016. 2016 Markusson Professional Grinders AB All rights reserved. Table of contents 1 Introduction.....................................................
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationB/54. Ergonomically designed handle. Motor with highperformance. Continuously adjustable mitres up to 45 (with 5 locking positions)
Ergonomically designed handle Motor with highperformance gear box Continuously adjustable mitres up to 45 (with 5 locking positions) Solid base plate Automatically retracting blade guard /54 ALFRA RotaSpeed
More informationGROWING BETTER THROUGH DESIGN. 6ft Lean-To LEAN-TO. Assembly Instructions 04/02
GROWING BETTER THROUGH DESIGN 6ft Lean-To LEAN-TO Assembly Instructions 04/02 6ft Lean-To Greenhouse Base Plan Introduction/Tools/Contents / / Contents This is a copy of our Lean-To greenhouse base plan.
More informationSLIDING MECHANISM TROLLEY CATCH TROLLEY ASSEMBLY FLOOR GUIDE
Set A Set B PFD30 SG Fire Door Kit FITTING INSTRUCTIONS For use with 44mm thick doors only For Single and Double doors SUGGESTED TOOLS DRILL G-CLAMP TAPE MEASURE (Image for reference only) HACKSAW POCKET
More informationAssembly Instruction. 9,2 m² Grillkota
Assembly Instruction 9,2 m² Grillkota Dear customers, Thank you for purchasing our product. We recommend that you read these instructions before installation and make the necessary preparations for building.
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationMevaDec. Contents. Ref. No. Description / Application Product m² list kg
Ref. No. Description / Application Product m² list kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list.
More information