CONVEY-ALL TCH-1070, TCH-1075, TCH-1080 & TCH-1085 MODEL CONVEYOR WITH SCISSOR LIFT UNDERCARRIAGE ASSEMBLY MANUAL

Size: px
Start display at page:

Download "CONVEY-ALL TCH-1070, TCH-1075, TCH-1080 & TCH-1085 MODEL CONVEYOR WITH SCISSOR LIFT UNDERCARRIAGE ASSEMBLY MANUAL"

Transcription

1 CONVEY-ALL TCH-1070, TCH-1075, TCH-1080 & TCH-1085 MODEL CONVEYOR WITH SCISSOR LIFT UNDERCARRIAGE ASSEMBLY MANUAL

2 LIMITED WARRANTY Convey-All warrants to the buyer that the new machinery is free from defects in material and workmanship. This warranty is only effective as to any new machinery which has not been altered, changed, repaired or treated since its delivery to the buyer, other than by Convey-All or its authorized dealers or employees, and does not apply to accessories, attachments, tools or parts, sold or operated with new machinery, if they have not been manufactured by Convey-All. Convey-All shall only be liable for defects in the materials or workmanship attributable to faulty material or bad workmanship that can be proved by the buyer, and specifically excludes liability for repairs arising as a result of normal wear and tear of the new machinery or in any other manner whatsoever, and without limiting the generality of the foregoing, excludes application or installation of parts not completed in accordance with Convey-All operator's manual, specifications, or printed instructions. Written notice shall be given by registered mail, to Convey-All within seven (7) days after the defect shall have become apparent or the repairs shall have become necessary, addressed as follows: Convey-All Industries Inc., Box 2008, 130 Canada St., Winkler, Manitoba, R6W 4B7. This warranty shall expire one (1) year after the date of delivery of the new machinery. If these conditions are fulfilled, Convey-All shall at its own cost and at its own option either repair or replace any defective parts provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or any other work, unless Convey-All has authorized such expenses in advance. The warranty shall not extend to any repairs, changes, alterations, or replacements made to the new equipment other than by Convey-All or its authorized dealers or employees. This warranty extents only to the original owner of the new equipment. This warranty is limited to the terms stated herein and is in lieu of any other warranties whether expressed or implied, and without limiting the generality of the foregoing, excluded all warranties, expressed or implied or conditions whether statutory or otherwise as to quality and fitness for any purpose of the new equipment. Convey-All disclaims all liability for incidental or consequential damages. This machine is subject to design changes and Convey-All shall not be required to retrofit WARRANTY VOID IF NOT REGISTERED

3 TABLE OF CONTENTS SECTION DESCRIPTION 1 Introduction Safety Safety Assembly Safety Assembly... 3 A Tube Assembly... 3 B Cable Bridging C Belting Installation D Bottom End PTO Drive Installation E Wind Guard Installation F Electric Drive Installation G Side PTO Installation H Hydraulic Line Installation J Safety Signs K Run Up L Undercarriage Assembly M Undercarriage Installation N Swing Out Conveyor Installation O Tube Straightness Index... 92

4

5 1 INTRODUCTION Congratulations on your choice of a Convey-All Conveyor to complement your material handling operation. This equipment has been designed and manufactured to meet the needs of a discriminating buyer for the efficient moving of material. Safe, efficient and trouble free assembly of your Conveyor requires that you and anyone else who will be assembling, operating or maintaining the machine, read and understand the Safety, Operation, Maintenance and Trouble Shooting information contained within the Assembly and Operator's Manuals. The Convey-All conveyor is easy to assemble and set up providing you follow the steps and instructions provided in this manual. It is always recommended that you do some preparation work prior to starting to insure that all tools and equipment is at hand. Be sure the assembly area is large enough to lay out all the components with sufficient clearance for people, forklifts or other equipment around all sides. Gather all the required tools and wrenches. Have an electrician's snake and a 100 foot rope to pull the belt through the tube. Have hoists, forklifts, cranes or other lifting devices with the required lifting capacity available for use. Have appropriate stands with sufficient capacity for the application. Read instructions and follow them. This manual covers the Belt Tube Conveyors manufactured by Convey-All that are more than 70 feet long. Use the Table of Contents or Index as a guide to locate required information. Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your Convey-All Dealer or Distributor if you need assistance information or additional copies of the manuals. OPERATOR ORIENTATION - The directions left, right, front and rear, as mentioned throughout this manual, are as if you are towing it. The hitch is the front and left and right is the same as the Vehicle that 1

6 2 SAFETY SAFETY ALERT SYMBOL DANGER - Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations typically for machine components which, for functional purposes, cannot be guarded. WARNING - Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices. SIGNAL WORDS: Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal word for each message has been selected using the following guide-lines: CAUTION - Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices. 2.1 SAFETY 2.2 ASSEMBLY SAFETY YOU, are responsible for the safe assembly and operation of your Convey-All Conveyor. You must make sure that every person involved with the assembly be familiar with the related assembly and safety information contained in this manual. This manual will take you step-by-step through the assembly procedure and alerts you to all the good safety practices that should be followed. Remember, you are the key to safety. Good safety practices not only protect you but also the people around you. Make these safety practices a part of your assembly program. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices Use forklifts, hoists or cranes with sufficient lift capacity to handle the heavy components. 2. Provide adequate space for access to all sides of machine. 3. Use two men to handle the heavy, bulky components. 4. Have a first-aid kit and a fire extinguisher available for use should the need arise and know how to use it. 5. Wear appropriate protective gear. This list includes but is not limited to: - Protective shoes with slip resistant soles - Protective glasses or goggles - Heavy gloves

7 3 ASSEMBLY A TUBE ASSEMBLY 1. Shipping configuration. Fig. A1 SHIPPING CONFIGURATION 2. Remove all straps and tie downs. Lay out in work or assembly area. Be sure to remove all components from the tubes. Fig. A2 REMOVING TIE DOWNS 3. Open the wooden crate and lay the components adjacent to their assembly areas. Fig. A3 WOODEN CRATE 3

8 4. Lay out tube sections with the lip in the upward direction and the tube welding seam at the top. NOTE Feel inside tube if necessary to find the seam. Lay-Out Lip Fig. A4 TUBE SECTIONS (TYPICAL) 4

9 5. Connect tube sections using 1/2" x 1 1/2" bolts with flat washers on boths sides and a lock nut. Place bolt so nut is in the downward direction. Aligning Attaching Connected Fig. A5 TUBE SECTIONS ATTACHED 5

10 6. When tightened, sight along the tube to be sure it is straight. IMPORTANT Tube can be arced up but not to either side or down. Use flat washers between flanges to curve tube as required. Tube Fig. A6 TUBE SIGHTING Flange 7. Attach hopper to lower end of tube. Raise tube slightly with hoist or place on 2" x 4"'s to align with hopper outlet. Fig. A7 HOPPER 6

11 8. Open and extend discharge hood. 9. Attach discharge to upper end of tube. Fig. A8 DISHCARGE HOOD 10. Use a 100' tape to measure Fig. A9 ATTACH DISHCARGE and mark tube for attachment location. Refer to schematics at the back of book for dimensions. Keep schematic handy to refer to during assembly. NOTE For ease of assembly, it is recommended that the assembler make copies of the appropriate schematic at the back of the book and have it available for easy referral during assembly. Fig. A10 MARKING 7

12 11. Separate undercarriage mounts. Fig. A11 UNDERCARRIAGE MOUNTS 12. Install undercarriage mounts (refer to schematics for location). Lay-Out Fig. A12 MOUNTS Positioned 8

13 13. Use 1/2" x 2" bolts through 6 inch wide tube clamps to secure undercarriage mounts. Snug up bolts but do not tighten. 14. Lay out 6" tube clamps for drive box mounting. Fig. A13 MOUNTED 15. Swing tube over drive box and lower. Fig. A14 CLAMPS 16. Install 1/2" x 2" bolts and snug up. Fig. A15 DRIVE BOX Fig. A16 MOUNTED 9

14 17. Raise entire assembly and place on stands. Fig. A17 STANDS 18. Fabricate a stand with pins that mate to undercarriage mount to keep tube from moving. Fig. A18 PINNED STAND 10

15 19. Level components: a. Always start with hopper. b. Discharge. Hopper NOTE It will be necessary to loosen flange bolts at the first joint to level. If insufficient, go to second joint also. c. Drive box. Discharge d. Lower undercarriage mount. Drive Box e. Upper undercarriage mount. Lower Mount IMPORTANT Use clamping bolts to level these components by tightening alternate sides. Be sure dimensions are correct. Upper Mount Fig. A19 LEVELING 11

16 20. Stack tube clamps in a pile to make sure the same length legs are on the same side to ease leveling of the roller brackets. Fig. A20 BRACKET PILE 21. Place 2 inch tube clamps in position and add lower return roller bracket on the ground. Lay-Out 22. Use 1/2" x 2" bolts to attach return roller brackets to clamps. Tighten finger tight. Attached Fig. A21 ROLLER MOUNTS 12

17 23. Use a level to level each return roller bracket. Fig. A22 LEVELING 24. Depress roller shaft and install roller in bracket. Position Installed Fig. A23 RETURN ROLLER 13

18 25. Place swing out conveyor winch bracket next to hopper flange. Secure with 6 inch clamp bracket on the bottom using 1/2" x 2" bolts. Level frame. NOTE This applies to Swing Out model only. Skip to Section B if you do not have a Swing Out model. Placed Mounted Fig. A24 SWING-OUT WINCH Leveling 14

19 26. Mount the swing out hopper lift arm 16' 4" from hopper flange. 27. Secure with 6" clamp from the bottom. Anchor Arm 28. Position so the outer end is 1/2" higher than the tube end. Use a level as an aid to measuring. 1/2" Higher Attached Fig. A25 ANCHOR ARM 15

20 29. Install anchor screws in anchor arm top bracket. a. Pre drill 1/4" hole. b. Install 2 screws on lower side of cross shaft and 1 on upper side. Drilled Hopper End Fig. A26 ANCHOR SCREWS Discharge End 16

21 30. Install 1/4 inch swing out cable: a. Thread cable through arms. b. Thread cable into side of winch drum. Arm c. Route through dimpled holes. Threaded d. Install clamp over cable. Drum e. Pull cable loop back. Clamp Fig. A27 CABLE Attached 17

22 31. Attach winch handle. Fig. A28 WINCH HANDLE 32. Retract some of the cable. Be sure that it covers the drum in layers. Starting Fig. A29 CABLE LAYERS Layers 18

23 B CABLE BRIDGING 1. Refer back to schematic in Appendix C for bridging location and configuration. 2. Attach bridge frame to top side of flange. Lay-Out 3. Level upper cross frame and tighten 1/2" x 1 1/2" bolts. Mounted Fig. B1 TRUSS MOUNTING Leveled 19

24 4. Attach eyebolts along tube: a. Flange. b. Discharge. Flange Fig. B2 EYEBOLTS Discharge 20

25 5. Mount cable end through eyebolt. a. Slide clamps over cable. b. Thread through eyebolt. c. Fold back through clamps. d. Snug up to eyebolt. Flange e. Tighten clamps. Snugged Up IMPORTANT Be sure loaded cable is in clamp saddle. Tightened Fig. B3 CABLE END Schematic 21

26 6. Pull cable through clamps and lay along the top of the return roller brackets. Pull tight. 7. Use cable clamps to secure IMPORTANT The cable should be snugged up so that it is tight when the cable is placed on top of cross brace frame. Lay-Out Fig. B4 CABLE Over Frame cables on the top of the cross brace. Do not tighten U bolts yet. Fig. B5 CABLE CLAMPS 22

27 8. Do not tighten cable components until the undercarriage is installed except for upper eyebolts. 9. Start nut on eyebolt. a. Position lock nut 1 1/2" from bottom side of discharge flange. b. Tighten eyebolt until lock nut is tight against flange. Lock Nut Dimensions 10. Position jam nuts at bridging flange 1 1/8" from flange. Tightened Fig. B6 DISCHARGE EYEBOLT 11. Tighten eyebolt until jam nut seats against flange. 1 1/8" Position Seated Fig. B7 BRIDGING EYEBOLT 23

28 12. Mount anchor eye bolts on each side of hopper flange. Left Fig. B8 EYE BOLT Right 13. Install the cable anchor hopper end eye bolts in the following positions. a. At the 2:00 and 10:00 positions for the non-electric drive models. b. At the 11:30 and 12:30 positions for the electric drive models. Route the cable under the motor mounting base. Non-Electric Fig. B9 EYEBOLT POSITION Electric 24

29 C BELTING INSTALLATION 1. Push wire through tube. Fig. C1 WIRE 2. Remove step guard from hopper. Fig. C2 STEP GUARD REMOVED 3. Push wire through and attach belting to belting on cable. Fig. C3 WIRE / CABLE BELTING 25

30 4. Use wire to pull cable through tube. Fig. C4 CABLE 5. Remove lacing pin. Fig. C5 LACING PIN 6. Locate belting roll above drive box and place on stands. Fig. C6 STANDS 26

31 7. Roll out belt and thread above return rollers. Be sure tread side is down. Threading Roller Fig. C7 BELT Discharge 27

32 8. Attach belting end to cable belting. Threaded 9. Cup belting to direct into tube. Fig. C8 BELTING Attaching 10. Pull belting through tube. Use a mechanical assist (truck, forklift, etc.) if required. Fig. C9 CUPPING 28 Fig. C10 PULLING

33 11. Lift hopper flashing up so belting slides under it. 12. Pull belting through 5 feet and disconnect cable. Fig. C11 FLASHING 5 Feet 13. Push flashing back into hopper. Fig. C12 BELTING Disconnect Fig. C13 FLASHING 29

34 14. Thread belting into bottom of hopper frame above the return rollers. 15. Pull out of top end of hopper. Front 16. Thread remaining belting through drive box. Follow lines and schematic. Fig. C14 HOPPER Rear Schematic 30 Fig. C15 DRIVE BOX Belt

35 17. Clamp with vise grips to hold in place. Fig. C16 BELTING 18. Attach belting clamp to lower end of belt. 19. Use a cable come-along to pull belting ends together. Come Along 20. Install lacing pin. Pulling Fig. C17 LACING Pinning 31

36 21. Crimp the end of lacing kit with a vise grip to hold pin in place. Right Side Left Side Fig. C18 CRIMPING LACING KIT 22. Set belt tension. Change spring position to align bolts. Offset 32 Fig. C19 BOLT ALIGNMENT Aligned

37 23. Mount step guard. Fig. C20 STEP GUARD 24. Mount hitch assembly. Fig. C21 HITCH ASSEMBLY 25. Mount jack anchor bracket. 26. Mount jack. Fig. C22 JACK ANCHOR 33

38 D BOTTOM END PTO DRIVE INSTALLATION 1. Use PTO transport bracket to mark mounting hole. 2. Drill 3/8" hole. Template 3. Mount transport bracket. Hole 4. Remove side guard. Mounted Fig. D1 PTO TRANSPORT BRACKET 5. Install safety signs. a b Mounted b a 34 Fig. D2 SIDE GUARD Safety Signs

39 6. Install PTO shafts. a. Input shaft. Install key. Slide yoke over shaft. Key Tighten set screws. Yoke Fig. D3 INPUT SHAFT Set Screws 35

40 b. Extension shaft front. Install key. Slide yoke over shaft. Key Tighten set screws. Yoke Set Screws Fig. D4 EXTENSION SHAFT FRONT 36

41 c. Extension shaft rear. Lock pin. Close guard. Lock Pin Drill hole. Guard Closed Anchor chain Drill Hole Anchor Chain Fig. D5 EXTENSION SHAFT REAR 37

42 7. Install guard over shaft on left side. 8. Attach PTO shaft guard anchor chain. Shaft Guard/Chain Fig. D6 GUARD / ANCHOR CHAIN 38

43 E WIND GUARD INSTALLATION 1. Lay out wind guards along the side of the frame. 2. Install wind guards along frame: Fig. E1 WIND GUARD LAY-OUT a. Use 2 self-tapping screws into each return roller mounting bracket. b. Use 2 self-tapping screws into each undercarriage cradle assembly. Discharge NOTE Always over lap wind guards at joint. c. And into drive box assembly. Return Roller Bracket d. On left side, slide behind washers under mounting bolts. Drive Box Right Drive Box Left Fig. E2 WIND GUARDS 39

44 3. Lay wind guard against side of tube and mark spot to be cut out at flange. Cut 1 1/2 inches deep and 1" wide. 4. Lay against tube and secure with self tapping screws. Marking Cut-Out Fig. E3 FLANGE Mounted 40

45 5. Make a cut-out in wind guard on both sides at upper undercarriage mount. 2" forward of pin. 2 1/4" up. Template 15" forward. Lines 6. Cut out with a grinder to reduce guard bending. Fig. E4 CUT-OUT Cut-Out 41

46 F ELECTRIC DRIVE INSTALLATION TCH ELECTRIC DRIVE 1. Position drive box assembly under tube. IMPORTANT Be sure drive box is located at the required position on the tube. Refer to the schematics in Appendix A and measure to be sure. 2. Lay an extra 3" wide clamp next to discharge and mounting bracket. Assembly 3. Raise drive box assembly. 4. Install 1/2" x 2" mounting bolt. Extra Clamp Raised 42 Fig. F1 DRIVE BOX Fasteners

47 5. Level drive box assembly. 6. Use clamps to move assembly while tightening fasteners. Leveling 7. Be sure extra clamp flanges are even with adjacent flanges. Tightening Fig. F2 MOUNTING BOX Extra Clamp 8. Raise electric motor mounting assembly up. Fig. F3 LIFTING 43

48 9. Move over tube and lower into position. Be sure motor mounts toward hopper. Lowering Clamps Fig. F4 POSITIONED 10. Install clamps and secure. Be sure to level frame. 11. Tighten fasteners. Fig. F5 LEVELING 44

49 12. Mount secondary drive back guard. a. Use back guard as template to mark 5 mounting holes. Be sure to center the guard on the roller shaft. Measure to be sure. Measuring b. Drill holes. Template c. Mount back guard. Drilling d. Tighten fasteners. Fig. F6 BACK GUARD Mounting 45

50 13. Mount pulley to roller drive shaft. a. Use a emery cloth to remove paint from shaft. b. Install pulley. Emery Cloth c. Install hub. Pulley d. Install key. Hub e. Install hub bolts. Key f. Slide hub/pulley in as far as it will go and tighten hub bolts. Be sure to tighten hub bolts in rotation. Hub Bolts 46 Fig. F7 ROLLER PULLEY Positioned

51 14. Mount pulley to cross shaft. a. Install pulley. Pulley b. Install hub. c. Install key. Hub d. Install hub bolts. Key e. Tighten hub bolts if pulleys are aligned. Hub Bolts Fig. F8 CROSS SHAFT PULLEY 47

52 15. Check that pulleys are aligned. Use a straight edge. Move the hub/pulley on cross shaft as required to align pulleys. Fig. F9 PULLEY ALIGNMENT 48

53 16. Install V belts. a. Move cross shaft to its loosest position. b. Install belts. Cross Shaft c. Set belt tension. Belts Measure distance from bearing blocks to mounting frame edge. Be sure they are both the same. Measurements Use bearing position bolts to set location. d. Tighten bearing block anchor bolts. Position Fig. F10 DRIVE BLOCKS Bearing Blocks 49

54 17. Mount hinged guard. a. Install mounting bolts. b. Position next to hinges. c. Install bolts through hinges. Hinges d. Tighten fasteners. Bolts e. Close and secure guard with rubber latches. Tightened 50 Fig. F11 HINGED GUARD Rubber Latches

55 18. Install electric motor. a. Lift motor into position. b. Install anchor bolts. Be sure to use 2 flat washers on the bottom. Lifting Anchor Bolts Fig. F12 MOTOR INSTALLATION 51

56 19. Mount guard back shield. a. Center upper end on shaft. Measure to be sure. b. Use back guard as a template to mark hole position. Centering c. Drill holes. Template d. Install mounting bolts. Drilling Fig. F13 BACK GUARD Installed 52

57 20. Install back mounting bracket. a. Mark hole locations using the bracket as a template. b. Drill holes. Template c. Drill hole on vertical members. Drilling d. Install and tighten mounting bolts. Vertical Hole Fig. F14 BACK BRACKET Installed 53

58 21. Install cross shaft pulley a. Mount pulley. b. Install hub. Pulley c. Install key. Hub d. Install hub bolts. Key e. Position hub/pulley 1 inch from shaft end. f. Tighten hub bolts. Be sure to tighten the bolts in rotation. Positioned 54 Fig. F15 CROSS SHAFT PULLEY

59 22. Mount pulley on motor shaft. a. Remove sleeve over shaft. b. Remove key. c. Install hub. Key Removed d. Install key. Hub e. Mount pulley. Key f. Install bolts in hub. Pulley g. Move hub/pulley to align pulleys and tighten hub bolts. Fig. F16 MOTOR PULLEY Hub Bolts 55

60 23. Align pulleys. a. Lay a straight edge along faces of pulleys. b. Move motor to align pulleys. Straight Edge c. Tighten motor mounts when pulleys aligned. Fig. F17 ALIGNMENT Tightened 24. Install V belts. Fig. F18 BELTS INSTALLED 56

61 25. Set belt tension. a. Use motor base position bolts to set belt tension. b. Move base parallel to frame. Measure to be sure. Position Bolts Measuring c. Tighten jam nuts when motor base is properly positioned. Fig. F19 BELT TENSION Jam Nuts 57

62 26. Mount hinged guard. a. Install fasteners. b. Position next to hinges. c. Install fasteners. d. Tighten fasteners. Positioned e. Close and secure guard with rubber latches. Tightened Fig. F20 HINGED GUARD Latched 58

63 G SIDE PTO INSTALLATION 1. Raise drive assembly box to rest the tube in assembly cradle. IMPORTANT Refer to Appendix D for drive box position for PTO drive model. 2. Secure with 2 6 inch wide brackets. Positioned Fig. G1 DRIVE BOX Mounted 3. Remove bearing mounting bolt nuts. Removed 4. Mount guard. 5. Tighten bearing mounting bolts. Mounted Fig. G2 GUARD INSTALLATION 59

64 6. Mount PTO shaft. a. Open guard. b. Back out set screw over key. Guard c. Install key. Set Screw d. Install PTO shaft. Be sure yoke is flush with the end of the shaft. Key e. Tighten set screws in yoke. Yoke 60 Fig. G3 PTO SHAFT Set Screws

65 7. Mount PTO shaft storage bracket. a. Remove second bolt. b. Use bracket as template to mark mounting holes. c. Drill mounting holes. Template d. Mount bracket and tighten fasteners. Drilling e. Open input guard and swing PTO shaft into its storage position. Mounted Fig. G4 STORAGE BRACKET Stowed 61

66 8. Guard installation. a. Use guard as a template and mark holes. b. Drill holes. Template c. Mount 3/8" x 1" bolts. Hole Location Fig. G5 GUARD INSTALLATION 62

67 H HYDRAULIC LINE INSTALLATION 1. Lay out hydraulic line components. 2. Mount valve/line on bottom end of tube. Lay-Out 3. Secure with self tapping screw and clamp. Lower End Fig. H1 HYDRAULIC LINE Clamped 63

68 4. Place teflon tap on threads. 5. Install hose to go over flange. Tighten fitting. Teflon Tape 6. Clamp in place with self tapping screw. Tightening Fig. H2 HOSE Clamped 64

69 7. Place Teflon tape on threads of 15' hose. 8. Connect hose to valve fitting. Tighten fitting. Teflon Tape 9. Use self tapping screws to secure with a clamp on each side of valve. Connected Fig. H3 VALVE / HOSE Clamps 65

70 10. Use hose clamps to secure hose along the side of hopper. a. Clamp on side of hopper frame. b. Attach to side frame members on standard hopper models. Swing Away Standard Fig. H4 HOSE CLAMPS 11. Secure upper hydraulic line with clamps. Fig. H5 HYDRAULIC LINE 66

71 12. Add Teflon tape to hose threads. 13. Connect hose to line. Tighten fittings to specified torque. Teflon Tape Fig. H6 UPPER CONNECTION Connected 14. Add Teflon tape to upper hose end threads. 15. Connect steel line and hose. Clamped 16. Secure with clamp. 17. Lay extra hose over top of tube until undercarriage is attached. Fig. H7 UPPER HOSE Extra Hose 67

72 J SAFETY SIGNS 1. Install safety signs. Lower end. a b c d e f g g a c d b Side amber reflectors in equal intervals of less than 15 feet. Lower End Left a b c d g f f e Input drive shields. Lower End Right Fig. J1 SAFETY SIGNS Amber Left Side (Typical) 68

73 2. Install Convey-All logos on boths ides. Left Fig. J2 LOGO Right 69

74 K RUN UP 1. Run conveyor and check for tension and alignment of belting. Check at: a. Belt drive box. Move center roller on appropriate side. Check Belt Left Fig. K1 BELT DRIVE BOX Right 70

75 b. Hopper end. Move tight side back. Roller c. Discharge end. Move tight side back. Fig. K2 HOPPER END Bearing Roller Fig. K3 DISCHARGE END Bearing 71

76 L UNDERCARRIAGE ASSEMBLY 1. Lay-out undercarriage components. Fig. L1 UNDERCARRIAGE 2. Attach stabilizer arms to the axle using 5/8" x 1 3/4" bolts and lock nuts. Snug up nuts. Fig. L2 STABILIZER ARMS 72

77 3. Install long stabilizer arm cross piece. Fig. L3 LONG CROSS PIECE 4. Install short stabilizer arm cross piece. Fig. L4 SHORT CROSS PIECE 5. Tighten 4 of the 6 joints. a. Tightened. b. Finger tight to allow movement when mounting to tube. Fig. L5 JOINTS 73

78 6. Mount sissor support stand to axle. 7. Tighten fasteners. 8. Attach sissor arm lower. Fig. L6 SISSOR SUPPORT 9. Insert sissor bushing into pivot and secure with 1" x 3 1/2" bolt. Fig. L7 SISSOR ARM LOWER Bushing 74 Fig. L8 SISSOR BUSHING Fasteners

79 10. Tighten fasteners. Fig. L9 TIGHT FASTENERS 11. Install lower sissor arm cross tube. 12. Tighten fasteners. Cross Tube Fig. L10 CROSS TUBE Tightened 75

80 13. Install upper sissor arm. 14. Install special pivot bushing fastener. Be sure flat washers are on each side and the thin washer is over bushing. Arm Fastener/Bushing Installed 76 Fig. L11 UPPER SISSOR ARM Tightened

81 15. Upper sissor arm position. Location Fig. L12 POSITION Fastener 16. Use 4" x 4" timber across frame to support upper sissor arm on 80' and 85' models. Fig. L13 TIMBER LOCATION 77

82 17. Install upper sissor arm cross tube. 18. Install fasteners. Tighten fasteners on right side. Fig. L14 CROSS TUBE 19. Install the cylinder. 20. Secure with pins at the top and bottom. Located 21. Secure with cotter pin. Spread cotter pin retainers to secure. Lower Pin 78 Fig. L15 CYLINDER Upper Pin

83 22. Install tires. a. Mount wheels. b. Tighten wheel bolts to their specified torque. Wheel Bolts Fig. L16 WHEELS Installed 79

84 M UNDERCARRIAGE INSTALLATION 1. Raise tube assembly. 2. Manoeuvre undercarriage into position under tube assembly. Fig. M1 POSITIONED 3. Align upper sissor arm with mounting holes. Fig. M2 ALIGNMENT 4. Install special pivot bushings. Fig. M3 BUSINGS/FASTENER 80

85 5. Install and tighten bushing fasteners. Aligning Fig. M4 INSTALLED Installed 6. Tighten fasteners on upper sissor arm cross member. Fig. M5 CROSS MEMBER 81

86 7. Raise front of undercarriage and align holes with mount. Fig. M6 ALIGNING 8. Install special pivot bushing and fastener. 9. Tighten fasteners on both sides. Bushing Fastener Bushing Fig. M7 INSTALLED Installed 82

87 10. Tighten fasteners on right end of short and long lower sissor arm cross members. 11. Pull hydraulic hose down from tube and route along sissor arm frame. Fig. M8 CROSS MEMBERS 12. Install fitting and restrictor in bottom of cylinder. Be sure to apply Teflon tape or sealant to threads. Fig. M9 SISSOR ARM Fitting Installed Fig. M10 FITTING / RESTRICTOR 83

88 13. Secure hydraulic hose with clamps. Route along the top of the sissor arm except the top clamp should be on the side to prevent pinching. Sissor Arm Fig. M11 CLAMPS Top 84

89 14. Install reflectors on axle. a. Amber on traffic side facing forward. Use self tapping screws to mount bracket. b. Red reflectors facing rearward to define left and right machine projection. Amber c. On 85' undercarriage, install red reflectors as in "b". Also install red orange fluorescent reflector to the inside of red. Red Fig. M12 REFLECTORS Red-Orange 15. Connect to a hydraulic source and check for leaks. Fig. M13 LEAKS 85

90 N SWING OUT CONVEYOR INSTALLATION 1. Bring up swing out conveyor. a. Position over intake. b. Lower pins into mounting brackets. Aligned c. Secure with 1/4" x 2" bolts. Pins Bolts Fig. N1 SWING OUT CONVEYOR 86

91 2. Move swing out next to machine. 3. Connect cable to loop on swing away hopper loop. 4. Use winch to raise conveyor. Cable Attached 5. Attach transport chains. Raised 6. Lower winch and support on chains. Chains Lowered Fig. N2 SWING AWAY CONVEYOR 87

92 7. Install front cover. Fig. N3 FRONT COVER 8. Install hitch. Fig. N4 HITCH 9. Install jack. Fig. N5 JACK 88

93 O TUBE STRAIGHTNESS 1. Set cable tension and eyebolt position. Support tube at both ends to bow upward. 2. Tighten all downward facing eyebolts. Be sure 3/8" of threads come through nut. Fig. O1 TUBE BOW Middle 3. Release front end hoist. 4. Sight along tube for straightness. Fig. O2 THREADS Hopper Fig. O3 STRAIGHTNESS 89

94 5. Adjust eyebolts to obtain straight tube below upper undercarriage attachment and a slight upward bow above attachment. 35' to 50' conveyors: 0" lift 55' to 70' conveyors: 2" lift 75' to 85' conveyors: 3" lift Straight Fig. O4 TUBE Upward Bow 6. Sight along tube to check for lateral bow or bend. Use cable to correct lateral bow. Fig. O5 TUBE 90

95 7. Tighten cable clamps on bridging frame. Fig. O6 CABLE CLAMPS 8. Lower discharge hood and secure. Fig. O7 DISCHARGE HOOD 91

96 4 INDEX A PAGE Assembly...3 Belt Installation...25 Bottom End PTO Drive Installation...34 Cable Bridging...19 Electric Drive Installation...42 Hydraulic Line Installation...63 Run Up...70 Safety Signs...68 Side PTO Installation...59 Swing Out Conveyor Installation...86 Tube Assembly...3 Tube Straightness...89 Undercarriage Assembly...72 Undercarriage Installation...80 Wind Guard Installation...39 Introduction...1 I Safety...2 Assembly Safety...2 Safety...2 S 92

97 CONVEY-ALL INDUSTRIES BOX 2008, 130 CANADA STREET WINKLER, MANITOBA R6W 4B7 PHONE (204) FAX (204) PRINTED IN CANADA ISSUE DATE: AUGUST, 2002 TCH10AM PART NUMBER:

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7 TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7 TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NOS. T8512 TOURNAMENT SERIES 3 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts

More information

Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide

Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide Tools Required: two adjustable wrenches, pliers, ¾ socket wrench recommended Note: please do assembly near your vehicle as you Can

More information

Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table

Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright

More information

MODEL 83 Pail Handler

MODEL 83 Pail Handler MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE

More information

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set # Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com

More information

Lumber Smith. Assembly Manual. If you are having problems assembling the saw and need assistance, please contact us at:

Lumber Smith. Assembly Manual. If you are having problems assembling the saw and need assistance, please contact us at: Lumber Smith Assembly Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 Step 1 Safety Carefully read the Owners Manual.

More information

EMB MANUFACTURING INC.

EMB MANUFACTURING INC. TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144

More information

Owner s Manual LSP38 38 Lawn Sweeper

Owner s Manual LSP38 38 Lawn Sweeper Owner s Manual LSP38 38 Lawn Sweeper Manual Contents Safety Instructions Assembly Operation Maintenance Parts Warranty 2 4-13 2 11 14-15 16 Your Lawn Sweeper Congratulations on your purchase of a new Precision

More information

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS 12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions

More information

Please read and understand the OnBoard Timpani Cart Owner s Manual before using the Timpani Cart.

Please read and understand the OnBoard Timpani Cart Owner s Manual before using the Timpani Cart. Assembly and Owner s Manual OnBoard Timpani Cart Performance Position Towing Position CONTENTS Important User Information...........................2 General......................................2 Manufacturer.................................2

More information

Installation Manual Roof Zone Ladder Rack

Installation Manual Roof Zone Ladder Rack Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32

More information

Installation Instructions Kit, Base Rail Bracket Part # 31413

Installation Instructions Kit, Base Rail Bracket Part # 31413 Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating

More information

6-CYLINDER TORNADO LIFT INSTALLATION MANUAL

6-CYLINDER TORNADO LIFT INSTALLATION MANUAL 6-CYLINDER TORNADO LIFT INSTALLATION MANUAL Model: TORNADO LIFT 18K 2018 Edition PROVIDED FOR ASSEMBLY (4) Foot Pads 16 sq. (4) Square Tube Legs (optional) (2) Cross Beams (2) Side Beams 2.5 Dia. Cylinders

More information

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NOS. T81 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be shipped inside

More information

1-CYLINDER TORNADO LIFT INSTALLATION MANUAL

1-CYLINDER TORNADO LIFT INSTALLATION MANUAL 1-CYLINDER TORNADO LIFT INSTALLATION MANUAL Model: TORNADO LIFT 2K 2018 Edition PROVIDED FOR ASSEMBLY Foot Pads 12 sq. Square Tube Legs (optional) Cross Beams Side Beams 2.5 Dia. Cylinders (with hoses

More information

PATRIOT DOCKS ASSEMBLY INSTRUCTIONS

PATRIOT DOCKS ASSEMBLY INSTRUCTIONS 6/1/2008 PATRIOT DOCKS ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical shoreline application.

More information

HD installation guide

HD installation guide JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling

More information

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.

SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER. SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions

More information

Outdoor Water Solutions, Inc. Small Backyard Windmill. Installation Manual

Outdoor Water Solutions, Inc. Small Backyard Windmill. Installation Manual Outdoor Water Solutions, Inc. Small Backyard Windmill Installation Manual Customer Service: 1-866-471-1614 Website: www.outdoorwatersolutions.com Springdale, Arkansas 72764 Phone: 1-866-471-1614 Fax: 1-479-750-9178

More information

Sunset Swings By Health in Motion, LLC

Sunset Swings By Health in Motion, LLC Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation

More information

installation guide

installation guide JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000

More information

SawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA

SawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA Contractor Fence Assembly OWNER S MANUAL Model CNS-SFA Warranty warrants to the original retail purchaser of the Contractor Fence Assembly accompanying this manual that the fence assembly will be free

More information

Spring Loaded All Season Roll-Up Doors

Spring Loaded All Season Roll-Up Doors Spring Loaded All Season Roll-Up Doors STAND-OFF MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately

More information

Please Do Not Return This Product To The Store!

Please Do Not Return This Product To The Store! MODEL NO. T8176 QUICK SERVE 3000 TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts may

More information

Sea Doo Spark Engine Access Kit

Sea Doo Spark Engine Access Kit Sea Doo Spark Engine Access Kit PART# - RS4-130-EAK APPLICATION(S): Sea Doo Spark. 2up & 3up Models. We strongly recommend the use of a service manual to familiarize yourself with the various components

More information

INSTALLATION INSTRUCTIONS CJ-5 M38A PART # With Doors

INSTALLATION INSTRUCTIONS CJ-5 M38A PART # With Doors INSTALLATION INSTRUCTIONS CJ-5 M38A1 1955-1975 PART #109-011 With Doors Thank you for purchasing Specialty s Convertible Top for your Jeep vehicle. It has been designed for great fit and long wear. Please

More information

1300-lb Furniture and Crate Movers

1300-lb Furniture and Crate Movers 1300-lb Furniture and Crate Movers Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

INSTALLATION INSTRUCTIONS Scout II - Fast Trac PART #

INSTALLATION INSTRUCTIONS Scout II - Fast Trac PART # INSTALLATION INSTRUCTIONS Scout II - Fast Trac PART #442-210 Thank you for purchasing Specialty s Convertible Top for your Scout vehicle. It has been designed for great fit and long wear. Please read and

More information

Hardware and Components:

Hardware and Components: Hardware and Components: (A) 5/16 x 2 Hex Bolt (B) 5/16 x 2-1/4 Hex Bolt (C) 5/16 x 2-1/2 Hex Bolt (D) 4X 5/16 x 3/4 Hex Bolt (E) 4X 5/16 x 1-1/4 Hex Bolt (F) 11X 5/16 Flat Washer (G) 12X 5/16 Nylock Nut

More information

Instruction Manual. LSV36108A 3600# Vertical Lift LAKESHORE PRODUCTS, INC.

Instruction Manual. LSV36108A 3600# Vertical Lift LAKESHORE PRODUCTS, INC. LAKESHORE PRODUCTS, INC. Quincy. MI. 49082. tel 517.639.3815 LSV36108A 3600# Vertical Lift Instruction Manual Read carefully. Failure to follow the instructions and safety rules could result in severe

More information

Model Assembly & Operating Instructions

Model Assembly & Operating Instructions 30 SHEAR BRAKE ROLL Model 05907 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

More information

LifeGear G1 /HOME GYM ITEM NO.: 63100

LifeGear G1 /HOME GYM ITEM NO.: 63100 LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product

More information

FORD MOUNT INSTALLATION INSTRUCTIONS

FORD MOUNT INSTALLATION INSTRUCTIONS WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64289 June 1, 2003 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco (4X4 only) F-150 (4X4 only), F-250/350 Super Duty 1980 1991 Model No.

More information

REPAIR INSTRUCTIONS: CABLE

REPAIR INSTRUCTIONS: CABLE The repair instructions describe replacing the Cable in the Easy Sun PARASOL Sunshade. These repair instructions are intended only for persons with experience of using the tools required. Please read the

More information

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013

More information

Gared Pro-S Portable Backstop

Gared Pro-S Portable Backstop Models: 9616 & 9618 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION

More information

INSTALLATION INSTRUCTIONS Super Scout PART #

INSTALLATION INSTRUCTIONS Super Scout PART # INSTALLATION INSTRUCTIONS Super Scout 71-80 PART #443-010 Thank you for purchasing Specialty s Convertible Top for your Scout vehicle. It has been designed for great fit and long wear. Please read and

More information

Motorized Tower Raising System Manual

Motorized Tower Raising System Manual Motorized Tower Raising System Manual Introduction and Safety Guidelines Important! Read through the manual in its entirety prior to assembly and installation of the motorized tower raising system. WARNING:

More information

OPERATORS MANUAL WEEKENDER STEEL LADDER RACK

OPERATORS MANUAL WEEKENDER STEEL LADDER RACK OPERATORS MANUAL WEEKENDER STEEL LADDER RACK WWW.WEATHERGUARD.COM MODELS 1450 & 1475 1475 Shown INSTALLATION TIME Approximate installation time: 60 minutes (depending on truck equipment installation experience

More information

Warnings. Description. Prior to Installation Tools Needed

Warnings. Description. Prior to Installation Tools Needed Warnings Failure to act in accordance with the following may result in death or personal injury. The JT Strong Arm Stabilizer System is intended to eliminate chassis movement in travel trailers and fifth

More information

Stainless Steel Bench Stand

Stainless Steel Bench Stand Installation Manual Stainless Steel Bench Stand Product(s): 29600 29601 51229 2016 by Fairbanks Scales, Inc. Revision 2 02/16 All rights reserved. Amendment Record STAINLESS STEEL BENCH STAND Document

More information

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY Owner s Manual LSV50120B LS5000B leg bundle LS5021B post bundle LS5022B cradle bundle V50120B straight LS5003B spreader bundle LS5004B bunk bundle LS4005B accessory box LS2005B wheel LS5007B diag bundle

More information

Diva Acoustical Ceiling

Diva Acoustical Ceiling Installation Instructions Diva Acoustical Ceiling CONTENTS Important User Information...........................2 Safety Precautions.................................3 Required Tools....................................3

More information

Specifications. Important Safety Information

Specifications. Important Safety Information Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.

More information

Owner s Manual GS2010 Garden Seeder/Fertilizer. Caution: Carefully read all Rules and Instructions for Safe Operation.

Owner s Manual GS2010 Garden Seeder/Fertilizer. Caution: Carefully read all Rules and Instructions for Safe Operation. Manufacture s Limited Warranty for The limited warranty set forth below is given by Precision Products, Incorporated with respect to new merchandise purchased and used in the United States, its possessions

More information

Ballpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual

Ballpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual Ballpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual P a g e 2 Table of Contents Cover Page 1 Table of Contents 2 Welcome to Bannerman 3 Warranty 4 General Information & Tool Functions 5 How to

More information

INCLUDES BENCH MODELS:

INCLUDES BENCH MODELS: SHOOTING BENCH OWNERS MANUAL & USAGE INSTRUCTIONS INCLUDES BENCH MODELS: AR02-B The Deluxe Shooting Bench AR03-B The Swivel Action Shooting Bench AR02-B DELUXE SHOOTING BENCH WARNING: Do not use without

More information

00108/00110 INSTRUCTION MANUAL

00108/00110 INSTRUCTION MANUAL 00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS BRONCO FAST TRAC TOP PART #331-210 BRONCO 1966-1977 Thank you for purchasing Specialty s Convertible Top for your Bronco. It has been designed for great fit and long wear. Please

More information

Taurean Sectional Garage Door INSTALLATION INSTRUCTIONS

Taurean Sectional Garage Door INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN MAKE SURE THESE INSTRUCTIONS ARE READ AND UNDERSTOOD COMPLETELY. THESE INSTRUCTIONS ARE INTENDED FOR PROFESSIONAL GARAGE DOOR INSTALLERS. ALL REFERENCES ARE TAKEN FROM THE INSIDE LOOKING

More information

Owner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV

Owner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual AE-48 48 PLUG AERATOR IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA

More information

Check us out on-line! Installation Instructions

Check us out on-line!  Installation Instructions Installation Instructions 2 OPTIONAL ACCESSORIES Order Quantum Rack Accessories Online at www.dawsbetterbuilt.com Cargo Lock Kit Secure Your Load Cargo Locks can easily be installed and adjusted left or

More information

ATV STORM CHASER PLOW PUSH TUBE KIT

ATV STORM CHASER PLOW PUSH TUBE KIT ATV STORM CHASER PLOW PUSH TUBE KIT P/N 33-0070 OWNER S MANUAL Application MID-BODY ATV MOUNT NO. 15-XXXX, ALL MOUNT NO. 15-0050 ATTENTION DEALER: CUSTOMER MUST RECEIVE A COPY OF THIS MANUAL AT THE TIME

More information

1369 & 1379 MOUNT KITS

1369 & 1379 MOUNT KITS November 15, 2014 Lit. No. 64573, Rev. 01 1369 & 1379 MOUNT KITS 1369 Ford Bronco, F 150 4X4 1992-96 1379 Ford F 250/350 4X4 1992-97 Ford F 250 2WD (over 8,500 GVWR) 1992-97 Ford F 350 2WD (over 10,000

More information

Assembly & Installation Instructions

Assembly & Installation Instructions Wall Mount Garden Hose Reel Model 1041 Assembly & Installation Instructions 1 2 3 4 5 6 8 9 10 12 15 7 11 10 16 17 13 14 CONTENTS QUESTIONS? PROBLEMS? Please DO NOT contact or return this item to the retailer.

More information

OWNER'S MANUAL. Please Do Not Return This Product To The Store!

OWNER'S MANUAL. Please Do Not Return This Product To The Store! MODEL NO. T8190SA TABLE TENNIS TABLE OWNER'S MANUAL 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be shipped inside

More information

MM750 Installation Instructions

MM750 Installation Instructions MM750 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on

More information

INSTRUCTION BOOK AND PARTS LIST

INSTRUCTION BOOK AND PARTS LIST Rag Cutter MODEL WE WARNING This machine is equipped with a very sharp knife. Keep hands, arms, and hair away from the knife area at all times. Misuse of this machine or failure to follow all safety instructions

More information

OnBoard Bass Drum/Gong Cart

OnBoard Bass Drum/Gong Cart Assembly and Owner s Manual OnBoard Bass Drum/Gong Cart CONTENTS Important User Information...................................................................2 Safety...................................................................................3

More information

MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL. Phone: On-Line Technical Support:

MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL. Phone: On-Line Technical Support: MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz #6727BL COPYRIGHT JANUARY, 2005 BY WOODSTOCK INTERNATIONAL, INC.

More information

MI MI OPERATING MANUAL

MI MI OPERATING MANUAL MODEL NO.: MI-76100 MI-76150 OPERATING MANUAL RULES for SAFE OPERATION MAGNUM INDUSTRIAL MI-76100 and MI 76150 DRILL PRESSES To help ensure safe operation, please take a moment to learn the how to operate

More information

Due to possible damage in shipping, the vertical stop assembly has been removed from this machine.

Due to possible damage in shipping, the vertical stop assembly has been removed from this machine. Due to possible damage in shipping, the vertical stop assembly has been removed from this machine. To assemble, insert the threaded rod through the shroud opening in the top of the machine. Start the four

More information

INSTRUCTION SHEET. PIECE INVENTORY - MOBILE BASES Refer to the diagram for part identification.

INSTRUCTION SHEET. PIECE INVENTORY - MOBILE BASES Refer to the diagram for part identification. INSTRUCTION SHEET D2260 HEAVY-DUTY MINI-MOBILE BASE D2057 HEAVY-DUTY MOBILE BASE D2058 SUPER HEAVY-DUTY MOBILE BASE D2259 EXTENSION KIT FOR D2260/D2057 D2246 EXTENSION RAIL KIT FOR D2058 This Shop Fox

More information

31082 INSTALLATION INSTRUCTIONS

31082 INSTALLATION INSTRUCTIONS 08 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 07-CURRENT MAKE: HONDA MODEL: RIDGELINE STYLE: TRUCK WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S

More information

ATV CULTIVATOR OWNER S MANUAL

ATV CULTIVATOR OWNER S MANUAL ATV CULTIVATOR OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK

VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK 31 SUN PAC BLVD. BRAMPTON ONTARIO L6S 5P6 PHONE: 866-501-5484 FAX: 905-458-5484 TABLE OF CONTENTS Specifications Page 1 Engine Assembly Page 2 5 Base Section

More information

Assembly & Installation Instructions

Assembly & Installation Instructions Wall Mount Hose Reel Model 04-GH Configuration Pulls the hose out straight away from the wall. Configuration Pulls the hose out along side the wall. Assembly & Installation Instructions Version 0409 A

More information

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on

More information

Thank you for purchasing our product! *Please read these instructions and follow them step by step.*

Thank you for purchasing our product! *Please read these instructions and follow them step by step.* 07/07/08.rev1 PAGE 1 OF 11 601AL VERTICAL 60120VL LIFT W/CHAIN DRIVE WINCH Thank you for purchasing our product! *Please read these instructions and follow them step by step.* Step 1. Separate and group

More information

TK 422 PORTABLE BRAKE

TK 422 PORTABLE BRAKE 1 TIN KNOCKER TK 422 PORTABLE BRAKE INSTRUCTIONS & PARTS DIAGRAM TAAG MACHINERY CO. (Master Distributor) 1257-B Activity Dr. Vista, Ca 92081 Tel: (800) 640-0746 Fax: (760) 727-9948 Website: www.tinknocker.com

More information

ELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0

ELECTRIC SLIP ROLL MACHINE. Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 ELECTRIC SLIP ROLL MACHINE Model: ESR-1300X2.5/ESR-1300X4.5 ESR-1550X3.5/ESR-1580X2.0 Operation Manual Table of contents I MAIN SPECIFICATION...2 II SAFETY INSTRUCTIONS.. 2 III OPERATION INSTRUCTIONS..4

More information

RAMPAGE P R O D U C T S. BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO TOOLS REQUIRED

RAMPAGE P R O D U C T S. BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO TOOLS REQUIRED RAMPAGE P R O D U C T S 84 (+/- 1/4 ) BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO 1966-1977 TOOLS REQUIRED 3/8 WRENCH 7/16 WRENCH ½ WRENCH #2 PHILLIPS SCREWDRIVER 1/8 DRILL BIT 9/64 DRILL BIT 5/32 DRILL

More information

Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW

Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321519 Ph.: 800-274-6848 Revision G1 03/2014 www.jettools.com

More information

FORD MOUNT INSTALLATION INSTRUCTIONS

FORD MOUNT INSTALLATION INSTRUCTIONS WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 67449 FORD MOUNT INSTALLATION INSTRUCTIONS Bronco, F-150/250/350 4X4 1992-1996 and Ford F-250 2WD (over 8,500 GVWR) Ford F-350 2WD (over

More information

200A FLB VERTICAL 22113V LIFT W/CHAIN DRIVE WINCH

200A FLB VERTICAL 22113V LIFT W/CHAIN DRIVE WINCH PG. 1 OF 11 PORTA-DOCK, INC. 200A FLB VERTICAL 22113V LIFT W/CHAIN DRIVE WINCH STEP 1. Separate and group like parts and fasteners together. Locate the winch side member with the longer upright tube and

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8266

More information

OWNER'S MANUAL TIE ROD, WALL & FLOOR MOUNTED JIBS. Model JIB-HC, JIB-LC, JIB-FM

OWNER'S MANUAL TIE ROD, WALL & FLOOR MOUNTED JIBS. Model JIB-HC, JIB-LC, JIB-FM Vestil Manufacturing Company 999 N. Wayne Street, P.O. Box 507 Angola, IN 6703 USA Phone (60) 665-7586 Fax (60) 665-339 sales@vestil.com www.vestil.com Revised 09-0 A company dedicated to solving ergonomic

More information

Mortising Attachment

Mortising Attachment Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment. Attachment Tab Height: 16-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and

More information

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved 6002 STRINGING MACHINE OWNER'S MANUAL Issue 3 - June 20, 1998 Copyright 1998 GAMMA Sports - All Rights Reserved 6002 OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3... ASSEMBLY

More information

S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM

S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM PAGE 1 OF 6 PORTA-DOCK, INC. S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM Thank you for purchasing our product! *Please read these instructions and follow

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS JK BRAWLER ROCKERS INSTALLATION Thank you for purchasing Poison Spyder Brawler Rockers for your Jeep JK. Although it is a lengthy procedure, Installation is fairly simple with the right tools and good

More information

MODEL NO OWNER S MANUAL ASSEMBLY & OPERATING INSTRUCTIONS

MODEL NO OWNER S MANUAL ASSEMBLY & OPERATING INSTRUCTIONS COMPACT POST HOLE DIGGER MODEL NO. 24045000 OWNER S MANUAL ASSEMBLY & OPERATING INSTRUCTIONS THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. FAILURE TO FOLLOW THIS IMPORTANT

More information

INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X

INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X INSTALLATION INSTRUCTIONS JEEP SCRAMBLER FAST TRAC TOP PART #108-21X Thank you for purchasing Specialty s Convertible Top for your Jeep vehicle. It has been designed for great fit and long wear. Please

More information

SawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL

SawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL SawStop T-GlideTM Fence System- Professional Series II OWNER S MANUAL Warranty SawStop warrants to the original retail purchaser of a new T-Glide Fence System - Professional Series II from an authorized

More information

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual Outdoor Water Solutions, Inc. 9 Backyard Windmill Installation Manual Customer Service: -866-7-6 Website: www.outdoorwatersolutions.com Springdale, Arkansas 72762 Phone: -866-7-6 Fax: (79) 750-978 Thank

More information

INSTALLING YOUR NEW SPRING LIFT ARM KIT

INSTALLING YOUR NEW SPRING LIFT ARM KIT INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as

More information

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS 1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems

More information

DUMP N GO MODEL PV 212 FERRIS

DUMP N GO MODEL PV 212 FERRIS DUMP N GO MODEL PV 212 FERRIS 8722 E Research Center Rd. New Hope, MN 55128 Ph: 763-535-4038 Fax: 763-535-4633 PV 212 shown on Ferris IS1500Z Fits Ferris Zero-Turn mower models: IS500Z, IS1500Z, IS2000Z,

More information

MODEL NO (S ) POST HOLE DIGGER OWNER S MANUAL

MODEL NO (S ) POST HOLE DIGGER OWNER S MANUAL MODEL NO. 2100220 (S24045500) POST HOLE DIGGER OWNER S MANUAL ASSEMBLY & OPERATING INSTRUCTIONS THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. FAILURE TO FOLLOW THIS IMPORTANT

More information

Important Notice. caution: Use proper lifting equipment and correct procedures to avoid injury.

Important Notice. caution: Use proper lifting equipment and correct procedures to avoid injury. Integrity. Partnership. Quality. COMMERCIAL DOOR INSTALLATION INSTRUCTIONS SERIES 1900, 1950, 2000, 2250, 2500, 2750 Important Notice In the following text, the word: Warning: Indicates that serious injury

More information

Tilting Flat Panel Wall Mount Installation Guide

Tilting Flat Panel Wall Mount Installation Guide Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees

More information

Models 2230 and 2240

Models 2230 and 2240 Models 2230 and 2240 Overview... 2 Tools Needed... 2 Hardware...3 Assembly... 4-13 Installation... 14 Drawer Removal... 15 Operation... 15 Maintenance... 15 Accessories... 16 Limited Warranty... 16 Perform

More information

Western Products, PO Box , Milwaukee, WI MOUNT KIT. Model No Ford F-150 4X

Western Products, PO Box , Milwaukee, WI MOUNT KIT. Model No Ford F-150 4X Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com November 1, 2009 Lit. No. 64461, Rev. 05 64500 MOUNT KIT Model No. 3239 Ford F-150 4X4 2004-08 Installation Instructions Read

More information

CRYSTEEL S. this manual must be included with the vehicle after completing the installation.

CRYSTEEL S. this manual must be included with the vehicle after completing the installation. Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S Grain Tipper mounting and operating instructions this manual must be included with the vehicle after completing the installation. Web Site E-Mail

More information

Electric Skein Winder

Electric Skein Winder Electric Skein Winder Assembly and Use Package Contents 1 - Triangular Body (w/ motor) 1 - Cross Arm 1 - Left Foot (w/ yarn guide) 1 - Right Foot 1 - Adjustable Finger (w/ yarn clip) 3 - Adjustable Fingers

More information