TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7

Size: px
Start display at page:

Download "TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7"

Transcription

1 TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List Utility Auger Option Drawing Utility Auger Option Parts List Grain Cleaner Screens Shipping Bundles... 17

2 WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing s obligations under this warranty shall be limited to the repair or exchange, at Buhler Manufacturing s option, of any Buhler Manufacturing product or part which proves to be defective as provided. Buhler Manufacturing reserves the right to either inspect the product at the buyer s location or have it returned to the factory for inspection. The above warranty does not extend to goods damaged or subject to accident, abuse or misuse after shipment from Buhler Manufacturing s factory, nor to goods altered or repaired by anyone other than an authorized Buhler Manufacturing representative. Buhler Manufacturing makes no Express Warranties other than those, which are specifically described. Any description of goods, including any references and specifications in catalogues, circulars and other written material published, is for the sole purpose of identifying goods and shall conform to such descriptions. Any sample or model is for illustrative purposes only and does not create an Express Warranty that the goods conform to sample or model shown. The purchaser is solely responsible for determining suitability of goods sold. This warranty is expressly in lieu of all other warranties expressed or implied. Buhler Manufacturing will in no event be liable for any incidental or consequential damages whatsoever. Nor for any sum in excess of the price received for the goods for which liability is claimed. WARRANTY CLAIMS: Warranty requests must be prepared on Buhler Manufacturing Warranty Claim Forms with all requested information properly completed. Warranty Claims must be submitted within a thirty (30) day period from date of failure repair. WARRANTY LABOR: Any labor subject to warranty must be authorized by Buhler Manufacturing. The labor rate for replacing defective parts, where applicable, will be credited at a rate determined by the Company, Buhler Manufacturing. IMPORTANT FACTS: Buckets and Bucket Tines Carry No Warranty Bent Spears Carry No Warranty Snowblower Fan Shafts Carry No Warranty Mower Blades Carry No Warranty Portable Auger Parts Have Two (2) Year Warranty - 1 -

3 SAFETY INSTRUCTIONS 1. Read and understand the operator s manual before operating. 2. Keep all safety shields and devices in place. 3. Make certain everyone is clear before operating or moving the machine. 4. Keep hands, feet and clothing away from moving parts. 5. Shut off power to adjust, service or clean. 6. Tow the cleaner only at low speeds (approx. 20 mph) 7. Use a slow moving vehicle sign and warning lights if it is necessary to move the cleaner on a roadway. 8. The bolts which clamp on the drum screen straps should be turned so the end of the bolt trails the direction of rotation as explained in the assembly instructions. 9. Disconnect power before resetting motor overload. 10. Make certain electric motors are grounded

4 MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS ALERT: The following instructions refer to the intake end of the cleaner as the front and the output end as the rear. 1. Join the front frame (#1) and rear frame (#2) with two frame sides (#3) using four frame clamp plates (#6) with 5/16" x ¾ cap screws, lock washers and hex nuts. Bolt the frame cross brace (#4) between the frame sides using two frame clamps (#5). The hitch (#7) is pushed through the holes in the rear frame and frame cross brace and fastened to the frame cross brace with a 3/8" x 4" cap screw and lock nut. The hitch length is adjusted by moving the position of the frame cross brace. CAUTION: All bolts connecting the frame must be firmly tightened. Any loose bolts could result in the frame separating while towing the cleaner. 2. Slide the front legs (#11) into the sleeves at the bottom of the front frame. A 3/8" x 2" cap screw, lock washer and hex nut through each leg is used to adjust the height of the front of the cleaner. Place a wheel spacer (#12) on the stub shafts and mount the wheels (#13). The wheels are held on by a 1" I.D. flat washer and a ¼ x 1 ½ cotter pin. A 5/16" x ¾ cap screw, lock washer and hex nut is bolted through one of the holes at the top of the leg to keep it from sliding out. 3. Mount two 1" pillow bearings (#16) on the reducer shaft (#18) and bolt the bearings to the bottom of the reducer mount welded to the front frame as shown in drawing. Use ½ x 1 ¾ cap screws, lock washers and hex nuts. Bolt the idler arm (#25) to the same reducer mount using a 5/8" x 1 ¾ cap screw and lock nut. The end of the idler arm with the small hole is turned to the outside of the frame. Mount the idler pulley (#24) to the other end of the idler arm. A 5/8" I.D. flat washer is placed between the idler pulley and the idler before tightening with a 5/8" jam nut. A 3" pulley (#19) is mounted on the inside of the reducer shaft and a 15" pulley (#26) is mounted on the outside. 4. Bolt the motor mount (#33) to the front frame with two motor mount clamps (#34) using 3/8" x 1" cap screws, lock washers and hex nuts. The tightener hole in the side of the motor mount must face the tightener bracket welded to the front frame. Connect the belt tightener rod (#35) between the motor mount and the welded bracket on the frame using two 3/8" hex nuts. Bolt the motor guard (#32) and 1 H.P. electric motor (not supplied) to the motor mount using 5/16" x 1" cap screws, lock washers, flat washers and hex nuts. Mount a 2 ½ pulley (#29) on the electric motor and connect this pulley and the 15" pulley (#26) with a B-62 V-belt (#28). Tighten belt using belt tightener rod (#35)

5 MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS cont d. 5. Assemble the three drum rings (#'s 67, 68, & 69); cone flow control (#76) and two drum screen support rings (#71) on the drum shaft (#70). The cone flow control comes between the front and center drum rings while the drum screen support rings are placed on each side of the center drum ring. Be certain that all three drum rings are turned as shown in drawing. Support the ends of the drum shaft on stands so the rings can be turned till the outer holes in all three rings and the screen support rings are aligned. The holes for the cone screen support bars (#73) should also be aligned when the outer holes in the drum rings are in line. 6. The six cone screen support bars (#73) are bolted between the front and center drum rings to form a cone. Use 5/16" x ¾ cap screws, lock washers and hex nuts at the center ring and 5/16" x ¾ carriage bolts, lock washers and hex nuts at the front ring. Join the three drum rings and the two screen support rings with six drum screen support bars (#72) using 5/16" x ¾ carriage bolts, lock washers and hex nuts. Do not tighten any nuts until all bolts are in place. Lock the drum rings and the cone flow control onto the drum shaft by inserting a 3/8" x 1" set screw into the hubs and tightening. 7. Mount 1" pillow bearings (#16) on each end of the drum shaft. Lift the drum assembly into the frame with the cone end towards the front frame (end with adjustable legs). Bolt the rear pillow bearing to the top of the rear frame using ½ x 1 ¾ cap screws, lock washers, flat washers and hex nuts. Bolt the front pillow bearing underneath the top cross brace of the front frame. The intake auger pivot (#36) is placed on the top side of the same cross brace and bolted on together with the bearing using ½ x 2" cap screws, lock washers, flat washers and hex nuts. Place the B-133 V-belt (#22) around the front end of the drum before bolting on the front bearing. The rear drum ring should be positioned with 1 ¼ gap to the rear frame to allow clearance at the front end. 8. Mount the drum belt on the 3" pulley (#19) at the inside of the reducer shaft (#18). Tighten the belt with the idler pulley (#24) by hooking one end of the belt tightener spring (#23) in the end of the idler arm (#25) and the other end in the bracket welded to the inside edge of the front frame. CAUTION: Spring may be unhooked while installing drum screen to allow easier rotation of drum. 9. Mount the three cone screen sections (#75). Two of the cone segments will have to be notched to fit around the trash outlets on the center ring (see drawing below). After fitting the cone segments, pin them to the cone with ¼ x ¾ selftapping screws and flat washers. Strap the ends of the cone screens to the front and center rings using the two cone straps (#'s 77, & 78). Tighten straps with ¼ x 2 ½ round head bolts and ¼ square nuts. After strapping, the screen is tightened by inserting the remaining self-tapping screws

6 MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS cont d. CAUTION: All the strap bolts holding the drum screens should be turned so the end of the bolt trails the direction of rotation as shown in the drawing. This is done so the end of the bolt will not accidentally hook onto your hand or clothing while the drum is in rotation

7 MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS cont d. Both drum screens must also be notched to fit around the trash outlets as shown in the drawing below. A convenient way to hold the screen in position during assembly is by hooking several small springs across the lap joint. Two springs to hold the screen in place (#87) are included in the bag with each cleaner. After notching, pin the screens to the outer drum with ¼ x ¾ self-tapping screws and flat washers. Before fastening screen, be sure that the screen is flat against the drum rings and the screen supports all the way around the drum. Straps (#77) are fastened around the screens at the front and back rings, on each side of the trash outlets on the center ring and around each of the drum screen support rings (#71). Tighten straps and insert the remaining self-tapping screws. 10. Insert the discharge pan (#8) into the rear frame between the frame sides and the top and center cross braces. Bolt to frame sides using ¼ x 2" cap screws, lock washers, flat washers and hex nuts. Fasten top edge of discharge pan to the top cross brace on the rear frame using ¼ x ¾ self-tapping screws. Fit the rear drum shield (#9) around the rear of the drum and fasten to the top of the rear frame using ¼ x ¾ self-tapping screws. The rear drum shield is also bolted to the discharge pan using ¼ x ¾ cap screws, lock washers and hex nuts. Mount the pulley guard (#17) to the front frame by bolting it to the angle irons welded to the ends of the center cross brace using 5/16" x ¾ cap screws, lock washers, flat washers and hex nuts. Fasten the intake pan (#10) under the top cross brace of the front frame using 3/8" x ¾ cap screws, lock washers and hex nuts. 11. Intake Auger (Optional) Insert the intake auger swivel (#37) into the intake auger pivot (#36), which is already bolted to the top of the front frame. Bolt the intake auger connector plate (#40) to the intake auger using 3/8" x ¾ cap screws, lock washers and hex nuts. Join the intake auger connector plate and the intake auger swivel with a ½ x 7 ½ pin (#38) and cotter pin

8 OPERATION OF CLEANER The Cleaner will remove both fine seeds and chaff as well as larger trash such as corn cobs or stalks. A 6" utility auger is recommended as an intake auger. A 1 hp electric motor should be used to run both the cleaner and the utility auger. These must be supplied by the purchaser of the cleaner. Adjust the height of the legs on the front frame to the position which will give you maximum capacity. A variety of screens are available to fit your needs. Belt tension should be periodically checked and any trash should be removed from the pulley grooves. The cone flow control must be set to minimize grain loss through the trash outlets. Capacity will vary with type of grain and moisture content. A flow control on the intake auger will allow you to match input to cleaner capacity. The cleaner should be run until empty before stopping. Do not leave grain in cleaner or start the cleaner with a load of grain in it. Tires provided with cleaner are for low speed towing only. Keep all shields in place while cleaner is running. Stop cleaner to make any adjustments. The rotation direction when viewed from the motor drive end should be as shown in the drawing below

9 #360 GRAIN CLEANER - 8 -

10 #360 GRAIN CLEANER - 9 -

11 WHEN ORDERING PARTS Always give your dealer the Model and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. Item # Part # Description #360 GRAIN CLEANER PARTS LIST Front Frame Rear Frame Frame Side Frame Cross Brace Frame Clamp Frame Clamp Plate Hitch 8 F4305 Discharge Pan 9 F4307 Drum Shield 10 F4304 Intake Pan Front Leg Wheel Spacer Wheel w/ Tire '' I.D. Flat Washer (S.A.E.) /4'' x 1 1/2'' Cotter Pin '' Pillow Bearing 17 F4306 Pulley Guard Reducer Shaft Pulley, B Section 1'' x 3'' /8'' x 3/8'' Socket Set Screw /4'' x 2 1/4'' Square Key B-133 V-Belt Belt Tightener Spring Idler Pulley, 5/8'' x 4 5/8'' Idler Arm Pulley, B Section 1'' x 15'' /8'' x 1/2'' Socket Set Screw B-62 V-Belt Pulley, B Section, 5/8'' x 2 1/2'' /16'' x 1 1/2'' Square Key /16'' x 3/8'' Socket Set Screw Motor Guard Motor Mount Motor Mount Clamp Belt Tightener Rod Intake Auger Pivot

12 Intake Auger Swivel Intake Auger Swivel Pin /8'' x 1'' Cotter Pin Intake Auger Connector Plate /16'' Lock Washer /16'' Hex Nut /8'' X 3/4'' Hex Bolt /8'' Lock Washer /8'' Hex Nut /8'' X 1'' Hex Bolt /16'' x 1'' Hex Bolt /2'' Flat Washer (B.S.) /2'' x 2'' Hex Bolt /2'' Lock Washer /2'' Hex Nut /2'' x 1 3/4'' Hex Bolt /8'' x 1 3/4'' Hex Bolt /8'' Lock Nut /8'' Jam Nut /16'' x 3/4'' Hex Bolt /16'' Flat Washer (B.S.) /8'' x 2'' Hex Bolt /8'' x 4'' Hex Bolt /8'' Lock Nut /4'' x 2'' Hex Bolt /4'' Flat Washer (B.S.) /4'' Lock Washer /4'' Hex Nut /4'' x 3/4'' Self Tapping Screw /4'' x 3/4'' Hex Bolt Front Drum Ring Center Drum Ring Rear Drum Ring Drum Shaft Drum Screen Support Ring Drum Screen Support Bar Cone Screen Support Bar x 4 Drum Screen x 5 Drum Screen x 6 Drum Screen x 8 Drum Screen x 10 Drum Screen

13 /8'' x 5/8'' Cone Screen x 2 Cone Screen x 3 Cone Screen x 4 Cone Screen x 5 Cone Screen Cone Flow Control Drum Screen Strap Front Cone Screen Strap Rear Cone Screen Strap /16'' x 3/4'' Carriage Bolt /8'' x 1'' Sq. Hd. Set Screw /4'' x 2 1/2'' Rd. Hd. Bolt W/ Nut /8'' Flat Washer /8'' Flat Washer Wheel (8'' x 2 1/2'') W/ Spacer Tire W/ Tube (4.80/4.00-8) Screen Spring (.437'' O.D. x 6.155'' Lg)

14 6 UTILITY AUGER OPTION

15 Item # Part # Description 6'' UTILITY AUGER - OPTION (#360 GC) '' x 10' Tube W/ 6'' Motor Mount '' x 15' Tube W/ 6'' Motor Mount '' x 20' Tube W/ 6'' Motor Mount '' x 11' Flighting Weldment '' x 16' Flighting Weldment '' x 21' Flighting Weldment '' Bearing '' Flange /4'' x 10 1/2'' Spout Clamps /16'' x 3/4'' Hex Bolt (pl) /16'' Lock Washer (pl) /16'' Hex Nut (pl) '' x 11 1/8'' Clamp /8'' x 23'' Guard Weldment /8'' x 1'' Hex Bolt (pl) /8'' Hex Nut (pl) /8'' Lock Washer (pl) /2'' x 40'' Feed Control Rod /16'' x 1 1/2'' Hex Bolt (pl) Lock Screw '' I.D. Clamp W/ Lock '' Spout Assembly

16 #360 AND #480 GRAIN CLEANER SCREENS AVAILABLE CONE SCREENS OUTSIDE DRUM SCREENS CORN SCREENS 2 x 2 x 19 ga. small 4 x 4 x 23 ga. - standard 5/8 x 5/8 x 17 ga. - standard WHEAT SCREENS 4 x 4 x 23 ga. - standard 8 x 8 x 27 ga. - standard 3 x 3 x 21 ga. - large 6 x 6 x 25 ga. - large SUNFLOWER SCREENS 2 x 2 x 19 ga. - standard 8 x 8 x 27 ga. - small 5/8 x 5/8 x 17 ga. - large 6 x 6 x 25 ga. - standard 5 x 5 x 24 ga. - large SOYBEAN SCREENS 3 x 3 x 21 ga. - small 6 x 6 x 25 ga. - small 2 x 2 x 19 ga. - standard 5 x 5 x 24 ga. - standard MILO SCREENS 4 x 4 x 23 ga. - standard 8 x 8 x 27 ga. - standard 3 x 3 x 21 ga. - large 6 x 6 x 25 ga. - large OPTIONAL DRUM SCREEN 10 x 10 x 28 ga

17 GRAIN CLEANER SCREENS - illustrated in actual sizes

18 #360 GRAIN CLEANER - BUNDLE NUMBERS - Y360 QUANTITY BUNDLE REQUIRED NUMBER DESCRIPTION 1 F4320 #360 Crate NOTE: Screens and motor (1 hp 1725 RPM) are not included with the grain cleaner. SCREENS AVAILABLE (One Cone & One Drum Screen Required per Cleaner) F4309 F4310 F4311 F4312 F4313 F4314 F4315 F4316 F4317 Cone Screen, 2 x 2 x 19 ga. Cone Screen, 5/8 x 5/8 x 17 ga. Cone Screen, 4 x 4 x 23 ga. Cone Screen, 3 x 3 x 21 ga. Drum Screen, 4 x 4 x 23 ga. Drum Screen, 8 x 8 x 27 ga. Drum Screen, 6 x 6 x 25 ga. Drum Screen, 5 x 5 x 24 ga. Drum Screen, 10 x 10 x 28 ga. OPTIONS AVAILABLE: F1200 F1210 F1220 F1202 F1203 F1225 6" x 11' Utility Auger w/o Ctn. of Parts 6" x 16' Utility Auger w/o Ctn. of Parts 6" x 21' Utility Auger w/o Ctn. Of Parts 6" Bolt-on Spout c/w Clamps 6" Flow Control Ctn. Of Parts, 6" Utility Auger

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7

TABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7 TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...

More information

WARRANTY REGISTRATION AND POLICY

WARRANTY REGISTRATION AND POLICY WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material

More information

Owner s Manual LSP38 38 Lawn Sweeper

Owner s Manual LSP38 38 Lawn Sweeper Owner s Manual LSP38 38 Lawn Sweeper Manual Contents Safety Instructions Assembly Operation Maintenance Parts Warranty 2 4-13 2 11 14-15 16 Your Lawn Sweeper Congratulations on your purchase of a new Precision

More information

Installation Instructions Kit, Base Rail Bracket Part # 31413

Installation Instructions Kit, Base Rail Bracket Part # 31413 Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating

More information

DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #

DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part # DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6

More information

00108/00110 INSTRUCTION MANUAL

00108/00110 INSTRUCTION MANUAL 00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications

More information

DIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #

DIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part # DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......

More information

Owner s Manual GS2010 Garden Seeder/Fertilizer. Caution: Carefully read all Rules and Instructions for Safe Operation.

Owner s Manual GS2010 Garden Seeder/Fertilizer. Caution: Carefully read all Rules and Instructions for Safe Operation. Manufacture s Limited Warranty for The limited warranty set forth below is given by Precision Products, Incorporated with respect to new merchandise purchased and used in the United States, its possessions

More information

CONCRETE SAW PARTS LIST

CONCRETE SAW PARTS LIST CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1 Intentionally Blank Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring

More information

DIAMOND. MODEL: WS25 (December, 2006) FLUSH CUT WIRE SAW PARTS LIST P R O D U C T S. Part #

DIAMOND. MODEL: WS25 (December, 2006) FLUSH CUT WIRE SAW PARTS LIST P R O D U C T S. Part # DIAMOND P R O D U C T S FLUSH CUT WIRE SAW PARTS LIST MODEL: WS5 (December, 00) Part #0 Intentionally Blank Table of Contents Description Page No. Saw Component Assembly....-5 Frame Assembly Wire Drive

More information

MODEL 83 Pail Handler

MODEL 83 Pail Handler MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE

More information

Owner s Manual CD-42 CULTIVATING DISC MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV

Owner s Manual CD-42 CULTIVATING DISC MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual CD-4 CULTIVATING DISC IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA

More information

Sunset Swings By Health in Motion, LLC

Sunset Swings By Health in Motion, LLC Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation

More information

ASSEMBLY AND PARTS LIST MANUAL

ASSEMBLY AND PARTS LIST MANUAL ASSEMBLY AND PARTS LIST MANUAL CONVENTIONAL AUGER HD0- HD0- HD0- www.meridianmfg.com GENERAL DECLARATION OF CONFORMITY We the Manufacturer: Meridian Manufacturing Inc. PO Box 00 Pasqua Street North Regina,

More information

INSTRUCTION BOOK AND PARTS LIST

INSTRUCTION BOOK AND PARTS LIST Rag Cutter MODEL WE WARNING This machine is equipped with a very sharp knife. Keep hands, arms, and hair away from the knife area at all times. Misuse of this machine or failure to follow all safety instructions

More information

VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK

VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK VIBRATORY SCREED OPERATOR S MANUAL AND PARTS BOOK 31 SUN PAC BLVD. BRAMPTON ONTARIO L6S 5P6 PHONE: 866-501-5484 FAX: 905-458-5484 TABLE OF CONTENTS Specifications Page 1 Engine Assembly Page 2 5 Base Section

More information

DIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#:

DIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#: DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1300-XL March 2007 Part#: 1800666 Intentionally Blank Table of Contents Description Page No. Frame Group....4-7 Engine Group 9 Horsepower Gas. 8

More information

Owner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV

Owner s Manual AE PLUG AERATOR MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual AE-48 48 PLUG AERATOR IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 2 - PRO21SCH 12 - LM21 1 - LM21S 1 - LM21SW 1 - LM21S 11 - PRO21SCH 0 - LM21SW - LM21S - LM21SW 5 - LM21S - LM21SW 0700 /0 Printed in USA THE MANUAL Before you

More information

Tow-Behind Spreader. 175 lb Capacity MODEL NUMBER SP-175TB Rev

Tow-Behind Spreader. 175 lb Capacity MODEL NUMBER SP-175TB Rev Tow-Behind Spreader 175 lb Capacity IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. MODEL NUMBER SP-175TB Made In CHINA 15912 Rev.08-273 LIMITED WARRANTY

More information

OnBoard Bass Drum/Gong Cart

OnBoard Bass Drum/Gong Cart Assembly and Owner s Manual OnBoard Bass Drum/Gong Cart CONTENTS Important User Information...................................................................2 Safety...................................................................................3

More information

MODELS: CC3730TE / CC3740TE

MODELS: CC3730TE / CC3740TE DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODELS: CC0TE / CC0TE February 00 Part #00 Table of Contents Pictorial Page Index....., Belt Guard Assembly... Controls Legend....... Belt Tensioner Assembly....

More information

ASSEMBLY AND PARTS LIST MANUAL

ASSEMBLY AND PARTS LIST MANUAL ASSEMBLY AND PARTS LIST MANUAL CONVENTIONAL AUGER HD- HD- HD- HD- HD- www.meridianmfg.com GENERAL DECLARATION OF CONFORMITY We the Manufacturer: Meridian Manufacturing Inc. PO Box 00 Pasqua Street North

More information

CONCRETE SAW PARTS LIST

CONCRETE SAW PARTS LIST CONCRETE SAW PARTS LIST MODEL CC00XL ELECTRIC & HYDRAULIC UNITS August, 0 Part # 0 Table of Contents Common Parts.. Front Axle Assembly... Rear Axle Assembly... Transmission Assembly... Blade Shaft Assembly

More information

Record the serial number and date of purchase on your parts list for future reference.

Record the serial number and date of purchase on your parts list for future reference. Jointer Model: 0-0 Parts List Record the serial number and date of purchase on your parts list for future reference. Serial number: Date of purchase: Part # 0-0PL For more information: www.rikontools.com

More information

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort

More information

DUAL HEAD FLOOR GRINDER PARTS LIST MODEL CC200

DUAL HEAD FLOOR GRINDER PARTS LIST MODEL CC200 DUAL HEAD FLOOR GRINDER PARTS LIST MODEL CC00 September 0 Part #8000 Table of Contents Description Page No. Frame Assembly.. - Disc Assembly..... 6 Flange Assembly.. Engine Group, 0 HP HondaGas. 8 Gear

More information

M-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #

M-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part # M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor

More information

SawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA

SawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA Contractor Fence Assembly OWNER S MANUAL Model CNS-SFA Warranty warrants to the original retail purchaser of the Contractor Fence Assembly accompanying this manual that the fence assembly will be free

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Conventional Auger 8" & 10" x 36', 41', & 51' Model 092010 FK335 Table of Contents - 8" & 10" x 36', 41', & 51' Conventional Auger Table of Contents Introduction...5 Safety...6

More information

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.

More information

OWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully

OWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully OWNERS MANUAL Model No. -0301 CAUTION: Read Rules for Safe Operation and Instructions Carefully 17 LB. POLY PRO SPIKER/SPREADER Safety Assembly Operation Maintenance Parts PRINTED IN U.S.A. FORM NO. 78

More information

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve

More information

Hardware and Components:

Hardware and Components: Hardware and Components: (A) 5/16 x 2 Hex Bolt (B) 5/16 x 2-1/4 Hex Bolt (C) 5/16 x 2-1/2 Hex Bolt (D) 4X 5/16 x 3/4 Hex Bolt (E) 4X 5/16 x 1-1/4 Hex Bolt (F) 11X 5/16 Flat Washer (G) 12X 5/16 Nylock Nut

More information

INSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV

INSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV INSTALLATION & OPERATING INSTRUCTIONS for REDCO LETTUCE KING I and LETTUCE KING IV Lettuce King I Shown with optional Drum Ring Lettuce King IV TO BE SERVICED ONLY BY AUTHORIZED PERSONS P/N: 2802381 REV:

More information

Hydraulic Renovator 20

Hydraulic Renovator 20 Model #: 704591 Starting Date: 2/2005 8HP Kawasaki Engine Hydraulic Renovator 20 ILLUSTRATED PARTS LIST 2 Handle Assembly - Fig. 1 4 7 19 17 9 1 56 58 1 12 14 55 5 16 21 7 8 27 17 0 26 24 6 2 52 4 15 11

More information

PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS

PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & 6500 3 WHEEL SPRAYERS MUD HOG MODEL NUMBERS JD6500-13.5-16.1 I3 Tire (Export) JD65003-12.5L-15 I3 Tire TUTHILL Transport Technologies Brookston Indiana

More information

Record the serial number and date of purchase in your manual for future reference.

Record the serial number and date of purchase in your manual for future reference. 10 Woodworking Bandsaw Model: 10-305 Parts List Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: Part # 10-305PL1 For more information:

More information

48in. Plug Aerator. Owner s Manual

48in. Plug Aerator. Owner s Manual 48in. Plug Aerator Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Please read and understand the OnBoard Timpani Cart Owner s Manual before using the Timpani Cart.

Please read and understand the OnBoard Timpani Cart Owner s Manual before using the Timpani Cart. Assembly and Owner s Manual OnBoard Timpani Cart Performance Position Towing Position CONTENTS Important User Information...........................2 General......................................2 Manufacturer.................................2

More information

ATTACHMENT APPLICATION CHART

ATTACHMENT APPLICATION CHART R Ingersoll RM42Y2, RM44YR2 MOWERS SB38Y2 SNOWCASTER UB38Y2 UTILITY BLADE BG42Y2 BAGGER Parts Catalog 8-3280 INDEX PAINT GENERAL INFO 2014 Tractor with RM42Y2 Mower and BG42Y2 Bagger ATTACHMENT APPLICATION

More information

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List. 25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1

More information

Owner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.

Owner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts. Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.

More information

INCLUDES BENCH MODELS:

INCLUDES BENCH MODELS: SHOOTING BENCH OWNERS MANUAL & USAGE INSTRUCTIONS INCLUDES BENCH MODELS: AR02-B The Deluxe Shooting Bench AR03-B The Swivel Action Shooting Bench AR02-B DELUXE SHOOTING BENCH WARNING: Do not use without

More information

CONVEY-ALL TCH-1070, TCH-1075, TCH-1080 & TCH-1085 MODEL CONVEYOR WITH SCISSOR LIFT UNDERCARRIAGE ASSEMBLY MANUAL

CONVEY-ALL TCH-1070, TCH-1075, TCH-1080 & TCH-1085 MODEL CONVEYOR WITH SCISSOR LIFT UNDERCARRIAGE ASSEMBLY MANUAL CONVEY-ALL TCH-1070, TCH-1075, TCH-1080 & TCH-1085 MODEL CONVEYOR WITH SCISSOR LIFT UNDERCARRIAGE ASSEMBLY MANUAL LIMITED WARRANTY Convey-All warrants to the buyer that the new machinery is free from defects

More information

DUMP N GO MODEL PV 212 JOHN DEERE

DUMP N GO MODEL PV 212 JOHN DEERE DUMP N GO MODEL PV 212 JOHN DEERE 8722 E Research Center Rd. New Hope, MN 55428 Ph: 763-535-4038 Fax: 763-535-4633 PV 212 shown on John Deere Model X500 Fits models: LX/GT and GX ASSEMBLY INSTRUCTIONS

More information

RITE-HITE RAINGUARD TM

RITE-HITE RAINGUARD TM RITE-HITE RAINGUARD TM RG-3000 Trailer Top Seal Installation Instructions & Owner s Manual Date of Installation: This Manual Covers All Units Shipped 8/04 to Date PRINTED IN U.S.A. PUBLICATION NO. RG30-0010

More information

24 GA. PITTS ROLLFORMER

24 GA. PITTS ROLLFORMER 1 TIN KNOCKER 24 GA. PITTS ROLLFORMER INSTRUCTIONS & PARTS DIAGRAM Shown with Stand and Optional Flanging Attachment Rev. 092606 TAAG MACHINERY CO. (Master Distributor) 1257-B Activity Dr. Vista, CA 92081

More information

Gared Pro-S Portable Backstop

Gared Pro-S Portable Backstop Models: 9616 & 9618 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SELF LEVELING RADAR ANTENNA MOUNT MODEL 400G QUESTUS MARINE, INC. PO BOX 9 MARBLEHEAD, MA 01945 1-800-RADAR66 TEL 781.639.1900 FAX 781.639.1905 www.questusmarine.com INSTALLATION

More information

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved

STRINGING MACHINE OWNER'S MANUAL. Copyright 1998 GAMMA Sports - All Rights Reserved 6002 STRINGING MACHINE OWNER'S MANUAL Issue 3 - June 20, 1998 Copyright 1998 GAMMA Sports - All Rights Reserved 6002 OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... FEATURES PAGE 3... ASSEMBLY

More information

Hardware and Components:

Hardware and Components: Hardware and Components: (A) 4X 5/16 x 1 Carriage Bolt (B) 2X 5/16 x 2-1/4 Carriage Bolt (C) 2X 5/16 x 3-1/4 Hex Bolt (D) 2X 5/16 x 3/4 Hex Bolt (E) 2X 5/16 x 1-1/4 Hex Bolt (F) 5/16 x 2-1/4 Hex Bolt (G)

More information

TOW-BEHIND LAWN SWEEPER

TOW-BEHIND LAWN SWEEPER YTL305 YTL308 YTL305O YTL305Y TOW-BEHIND LAWN SWEEPER Instruction & Assembly SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE REV0555 Table of Contents General Warnings and Rules.3, 4 Controls and Features

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins

More information

M-3 CORE RIG PARTS LIST

M-3 CORE RIG PARTS LIST M- CORE RIG PARTS LIST October 9, 05 Part # 890005 Table of Contents Combination and Anchor Stands for Milwaukee and Core Bore Motors... Combination and Anchor Stands for Weka Motors... 5 Stair Base Assembly...

More information

LS12/LS12C. LS12C Item # LS12 Item # /10 LORTONE, inc Cyrus Way, Mukilteo, WA U.S.A

LS12/LS12C. LS12C Item # LS12 Item # /10 LORTONE, inc Cyrus Way, Mukilteo, WA U.S.A LORTONE LS12C Item # 053-093 LS12 Item # 053-090 LS12/LS12C Instructions and Parts List The LS12 is a quiet, fully enclosed, professional quality 12 slab saw. It comes equipped with a powerful screw-feed

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

Installation Manual Roof Zone Ladder Rack

Installation Manual Roof Zone Ladder Rack Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32

More information

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.

More information

TROLLA LEAVY 97 CM Lawn sweeper

TROLLA LEAVY 97 CM Lawn sweeper TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may

More information

BASE, COLUMN, ARM AND TABLE

BASE, COLUMN, ARM AND TABLE SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the

More information

OWNER S MANUAL AMERICA S PREMIER XXL SUPER RACKS XXL-2960 SUPER RACK/SMITH MACHINE XXL-2960 L 112 W 86 H 100 XXL-2960 / XXL-912 L 179 W 91 H 100

OWNER S MANUAL AMERICA S PREMIER XXL SUPER RACKS XXL-2960 SUPER RACK/SMITH MACHINE XXL-2960 L 112 W 86 H 100 XXL-2960 / XXL-912 L 179 W 91 H 100 OWNER S MANUAL XXL-60 L 11 W 6 H 100 XXL-60 SUPER RACK/SMITH MACHINE XXL-60 / XXL-1 L 1 W 1 H 100 AMERICA S PREMIER XXL SUPER RACKS XXL-60 Rev0 Revision Date -1-07 COLOR CHART GRAY= SUB-ASSEMBLY PARTS

More information

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY Owner s Manual LSV50120B LS5000B leg bundle LS5021B post bundle LS5022B cradle bundle V50120B straight LS5003B spreader bundle LS5004B bunk bundle LS4005B accessory box LS2005B wheel LS5007B diag bundle

More information

OPERATOR'S MANUAL 46" SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

OPERATOR'S MANUAL 46 SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.

More information

LB. POLY PRO DROP SPREADER

LB. POLY PRO DROP SPREADER owners manual Model No. -02882 17 LB. POLY PRO DROP SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts

More information

Instruction Manual. LSV36108A 3600# Vertical Lift LAKESHORE PRODUCTS, INC.

Instruction Manual. LSV36108A 3600# Vertical Lift LAKESHORE PRODUCTS, INC. LAKESHORE PRODUCTS, INC. Quincy. MI. 49082. tel 517.639.3815 LSV36108A 3600# Vertical Lift Instruction Manual Read carefully. Failure to follow the instructions and safety rules could result in severe

More information

DUMP N GO MODEL PV 212 FERRIS

DUMP N GO MODEL PV 212 FERRIS DUMP N GO MODEL PV 212 FERRIS 8722 E Research Center Rd. New Hope, MN 55128 Ph: 763-535-4038 Fax: 763-535-4633 PV 212 shown on Ferris IS1500Z Fits Ferris Zero-Turn mower models: IS500Z, IS1500Z, IS2000Z,

More information

Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide

Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide Hollywood Swing Away 2 and 4 Bike Racks Assembly and Installation Guide Tools Required: two adjustable wrenches, pliers, ¾ socket wrench recommended Note: please do assembly near your vehicle as you Can

More information

M-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part #

M-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part # M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008 Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer,

More information

ABM International, Inc. Navigator Assembly Manual

ABM International, Inc. Navigator Assembly Manual ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor

More information

OPERATOR, PARTS AND INSTALLATION MANUAL SC2101. SportCarrier II TM

OPERATOR, PARTS AND INSTALLATION MANUAL SC2101. SportCarrier II TM Serial No. SportCarrier II OPERATOR, PARTS AND INSTALLATION MANUAL SC2101 SportCarrier II Parts List Ref. No. Qty. Part No. Description 1 1 61-6080... Wldm't, Deck, SC2100/SC2101 2 4 200-1483...Pin, 5/8

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

Mortising Attachment

Mortising Attachment Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK

More information

Fletcher F-3000 / F-3100 Accessory Laser Kit

Fletcher F-3000 / F-3100 Accessory Laser Kit Fletcher F-3000 / F-3100 Accessory Laser Kit Shown Assembled on F-3000 Machine Product Warranty The Fletcher-Terry Company warrants the product purchased to be free from defects in parts and workmanship

More information

INCRA. Suggested Router Bit Speeds. pg Website:

INCRA. Suggested Router Bit Speeds. pg Website: INCRA Mast R Lift II R User Manual For Rockler Tables Model #02121 61 Forest Plain Road, Oro-Medonte, Ontario, Canada L3V 0R4 Toll Free: 1-866-272-7492 Email: jessem@jessem.com Website: www.jessem.com

More information

Model 6360/6361. Ambulance Cot Fastener INSTALLATION/OPERATION INSTRUCTIONS. IMPORTANT Keep manual on file at all times.

Model 6360/6361. Ambulance Cot Fastener INSTALLATION/OPERATION INSTRUCTIONS. IMPORTANT Keep manual on file at all times. IMPORTANT Keep manual on file at all times. Model 6360/6361 Ambulance Cot Fastener INSTALLATION/OPERATION INSTRUCTIONS For Parts or Technical Assistance 1 800 784 4336 Table of Contents Introduction..............................................................................

More information

ATV CULTIVATOR OWNER S MANUAL

ATV CULTIVATOR OWNER S MANUAL ATV CULTIVATOR OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

USER MANUAL. Cart, Mast & Boom. Assembly & Installation

USER MANUAL. Cart, Mast & Boom. Assembly & Installation Cart, Mast & Boom Assembly & Installation USER MANUAL 5845 WEST 82ND STREET INDIANAPOLIS, INDIANA 46278 U.S.A. Phone (317) 875-5592 Fax (317) 875-5456 Email gcisales@glascraft.com Web www.glascraft.com

More information

Mast R Lift II. User Manual Model # for INCRA METRIC Mast-R-Lift II

Mast R Lift II. User Manual Model # for INCRA METRIC Mast-R-Lift II Mast R Lift II User Manual Model #02123 for INCRA METRIC Mast-R-Lift II 61 Forest Plain Road, Oro-Medonte, Ontario, L3V 0R4 Canada 866-272-7492 Toll Free 705-726-8233 Local Phone 705-327-0295 Fax Email:

More information

Parts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &

Parts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) & Parts Manual Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) 1740273 & 1740275 11.2006 Table Of Contents PRODUCT COMPONENTS PAGES Handle Group... 4 Engine Group... 6 Frame Group... 8 Auger Housing

More information

Model Assembly & Operating Instructions

Model Assembly & Operating Instructions 30 SHEAR BRAKE ROLL Model 05907 Assembly & Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the

More information

Specifications. Important Safety Information

Specifications. Important Safety Information Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.

More information

Tilting, Swiveling & Rotating Flat Panel Wall Mount

Tilting, Swiveling & Rotating Flat Panel Wall Mount Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical

More information

BOUNCE TABLE TENNIS TABLE & ACCESSORIES ASSEMBLY INSTRUCTIONS

BOUNCE TABLE TENNIS TABLE & ACCESSORIES ASSEMBLY INSTRUCTIONS BOUNCE TABLE TENNIS TABLE & ACCESSORIES ASSEMBLY INSTRUCTIONS NG2325 THANK YOU! Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain

More information

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set # Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com

More information

SKID STEER STRAIGHT PLOW

SKID STEER STRAIGHT PLOW BOSS PRODUCTS A Division of Northern Star Industries, Inc. P.O. Box 787 Iron Mountain MI 49801-0787 www.bossplow.com SKID STEER STRAIGHT PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY PRECAUTIONS...

More information

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32 with up to 200mm x 200mm VESA Mounting Patterns Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60

More information

Section D ACCELERATOR

Section D ACCELERATOR Section D ACCELERATOR 1D Index No. Part No. Description 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm x 21 mm x 2 mm) 4.

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

M2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4

M2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4 M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...

More information

CONCRETE SAW PARTS LIST

CONCRETE SAW PARTS LIST CONCRETE SAW PARTS LIST MODEL CC00XL August 201 Part # 18020 GENERAL SAFETY WARNINGS AND PRECAUTIONS PERSONAL SAFETY Read and understand all operating instructions before attempting to operate the saw.

More information

25-A Shawnee Way Bozeman, MT Fed ID PH FAX

25-A Shawnee Way Bozeman, MT Fed ID PH FAX 25-A Shawnee Way Bozeman, MT 59715 Fed ID 81-0414516 PH 406-586-9393 FAX 406-585-7378 SkyBar Mount for UTV with 1 ¾ 2 Roll Bar Standard Mount (optional mount on page 3) This gun rack is supplied with brackets

More information

Parts Manual SPDZTR 42 / SPDZTR 42 BF /

Parts Manual SPDZTR 42 / SPDZTR 42 BF / Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to

More information

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013

More information

Section D ACCELERATOR

Section D ACCELERATOR Section D ACCELERATOR December 2009 1D Index 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm) 4. 47-021249-004 Ball Cushion

More information

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13

More information

Safety Instructions, Installation & Operator's Manual For. # CLAMSHELL GRASS CA TCHER KIT For 28" & 33" REAR ENGINE RIDING MOWERS

Safety Instructions, Installation & Operator's Manual For. # CLAMSHELL GRASS CA TCHER KIT For 28 & 33 REAR ENGINE RIDING MOWERS Safety Instructions, Installation & Operator's Manual For #6-3125 CLAMSHELL GRASS CA TCHER KIT For 28" & 33" REAR ENGINE RIDING MOWERS 28" REAR ENGINE RIDER WITH CLAMSHELL BAGGER KIT SHOWN SNAPPER, McDonough,

More information

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH

FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on

More information