CANADIAN 2016 PRICE LIST. Adams Rite. Architectural Hardware

Transcription

1 CANADIAN 2016 PRICE LIST Adams Rite Architectural Hardware Prices effective April 4, 2016

2 LIMITED WARRANTY 3 ASSA ABLOY Door Security Solutions Canada, a division of ASSA ABLOY Canada Ltd. and all of its current and future associated companies, subsidiaries and operating brands (hence forth referred to as ASSA ABLOY DSS Canada) reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion. The terms and conditions contained herein constitute the entire agreement between the parties. Purchase Orders, Quotations ( Quote ) requests, Acknowledgements or the like issued by the Purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY DSS Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY DSS Canada s authorized representatives. In the event of an acceptance of Purchaser s Purchase Order by ASSA ABLOY DSS Canada, the Purchaser agrees that such acceptance is solely conditioned on Purchaser s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the Purchaser s Purchase order. The terms and conditions in Purchaser s Purchase Order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY DSS Canada and the Purchaser. In the event that ASSA ABLOY DSS Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY DSS Canada to enforce or require strict performance of such term or condition in the future. PRICES: All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of this price list does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an Errors and Omissions Excepted basis (commonly referred to as E.O.E.). We reserve the right to correct clerical, stenographic and other obvious errors at any time. TERMS: 2% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY DSS Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney s fees in connection with the recovery of any delinquent amount. MINIMUM INVOICE: Minimum invoice for complete product is $ net product value. The minimum invoice for parts orders is $ net product value. Any orders not totalling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%. QUOTATIONS: If ASSA ABLOY DSS Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance. The Quote number and project name must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount. The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 10% or more. The Purchaser will have to solicit a new quotation.changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number. With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred to any Distributor not authorized by ASSA ABLOY DSS Canada to sell its products. This would be inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor s ineligibility for Quotes, or other actions in ASSA ABLOY DSS Canada s discretion. ASSA ABLOY DSS Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor s request to quote a price other than ASSA ABLOY DSS Canada s standard list price and regardless of whether ASSA ABLOY DSS Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders. SPECIAL ORDERS: Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSA ABLOY DSS Canada. A minimum special handling charge of $50.00 will be added for noncataloged product. Any additional labour or material required will be charged accordingly. Special products require special handling, and

3 4 therefore standard lead times may not apply. Please consult with your Sales Representative for further details. HIGH SECURITY ORDERS: To ensure proper control of End User restricted Products, ASSA ABLOY DSS Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre. All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY DSS Canada. High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts. ASSA ABLOY DSS Canada reserves the right to request authorization from the end user if necessary before the order is processed. CHANGES / CANCELLATION OF ORDERS: Changes or cancellations to a non stock order that has been released to production will be subject to a charge of costs for material and labour expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer s original order. All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY DSS Canada reserves the right to make a reasonable cancellation charge based on expenses incurred. PACKAGING: Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project. DELIVERY: Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to process an order. ASSA ABLOY DSS Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates. ASSA ABLOY DSS Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order. ASSA ABLOY DSS Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY DSS Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date. TERMS OF SHIPMENT: All products are shipped FOB the factory or the distribution center unless otherwise agreed to in writing from ASSA ABLOY DSS Canada. Title to and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department. All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY DSS Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser. ASSA ABLOY DSS Canada will ship via the best possible carrier. Shipments at the customer s request will be prepaid and any upcharge (actual cost less the amount negotiated by ASSA ABLOY DSS Canada) will be added to the invoice. CLAIMS: In the event of ASSA ABLOY DSS Canada or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier. Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY DSS Canada Customer Service Representative upon submittal of the order. ASSA ABLOY DSS Canada will obtain requested insurance and the additional cost will be included on Customer s invoice. INVOICE DEDUCTION: A ASSA ABLOY DSS Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms.

4 5 RETURNED GOODS: No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY DSS Canada to not accept returns of any materials that are correctly furnished as per the Distributor s Purchase Order. Mercury and Turbo material may be returned with approval, if ASSA ABLOY DSS Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have been shipped and invoiced in the previous sixty (60) days. Returns will be at the distributor s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling. Return of product due to customer order error or accommodation must be pre-arranged with ASSA ABLOY DSS Canada and approved in writing by Sales Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY DSS Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer. Defective goods that are out of warranty period will not be accepted for return. Products that are masterkeyed, special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective. PROCEDURE: Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY DSS Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty (60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some directions may apply to return the goods to the original manufacturer) ASSA ABLOY DSS Canada is not liable for damages to product during shipping. United Nations Convention on Contracts for the International Sale of Goods shall not apply to this INDEMNITY: Purchaser shall indemnify ASSA ABLOY DSS Canada and hold ASSA ABLOY DSS Canada harmless against all claims, liability, loss or other damages (including costs, legal or other wise incurred by ASSA ABLOY DSS Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY DSS Canada possession or control. FORCE MAJEUR: ASSA ABLOY DSS Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God, fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY DSS Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies. In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate. COPYRIGHTS AND PATENTS: All products in ASSA ABLOY DSS Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY DSS Canada. No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only. TAXES: Prices do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith. GOVERNING LAW: The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The

5 6 TABLE OF CONTENTS General Information Adams Rite Limited Warranty/Terms and Conditions 3 Table of Contents 4-5 Products DEADLOCKS RT1050D RITE Touch Digital Glass Door Lock Bottom Rail Deadlock(Swingbolt) 6 MS1837 Series MS Two-Point Deadlock 6 MS1847 Series MS Deadlock 7 MS1850S Series MS Deadlock 7 MS1850SN Series MS Deadlock (ANSI Size) 8 MS1861 Series MS Bottom Rail Deadlock Two-Point Deadlock 8 MS+1890 Series MS Deadlock/Deadlacth 9 MS1950 Series MS Deadlock Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors Dual Force Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors Heavy Duty Deadbolt Series Short Throw Deadbolt (Projection Style) , 4190 Flush Locksets (Including Deadlock) , 4431 Flush Locksets (Including Deadlock) Wood Door Deadbolt Wood Door Deadlock for Sliding Doors 13 DEADLATCHES 4300 Electrified Deadlatch (elatch) Steel Hawk RITE Pack Standard Duty Deadlatch Standard Duty Deadlatch Two-Point Deadlatch with Paddle Heavy Duty Deadlatch AN Heavy Duty Deadlatch (ANSI Size) 16 EXIT DEVICES 8099 Dummy Pushbar , 8100 Surface Vertical Rod Exit Device Narrow Stile Surface Vertical Rod Exit Device , 8300 Mortise Exit Device Narrow Stile Mortise Exit Device , 8500 Metal Door Concealed Vertical Rod Exit Device Narrow Stile Concealed Vertical Rod Exit Device , 8700 Rim Exit Device Narrow Stile Rim Exit Device , 8900 Wood Door Concealed Vertical Rod Exit Device 24 ACCESSORIES FOR EXIT DEVICES 24 KITTED OPTIONS FOR EXIT DEVICES 25 MODIFICATION OPTIONS FOR EXIT DEVICES 25 ELECTRIC STRIKES 7100, 7101 Electric Strikes , 7111 Electric Strikes , 7131 Electric Strikes Electric Strike Electric Strike Electric Strike Series Electric Strikes Components Fire-Rated Electric Strike Fire-Rated Electric Strike 29 Ultraline 7400, 7401 Electric Strikes 30 Ultraline 7410, 7411 Electric Strikes 30 Ultraline 7430, 7431 Electric Strikes 31 Ultraline 7440 Electric Strikes 31 Ultraline 74R1 Electric Strikes 31 Ultraline 74R2 Electric Strikes Series Electric Strikes Components 32 FLUSHBOLTS & PIVOTS 1870 Cylinder-Operated Flushbolt HM Cylinder-Operated Flushbolt Cylinder-Operated Flushbolt 17 MS1880, MS1881 Two-Point Flushbolts 18 MS2180 Auto-Release Two-Point Flushbolt 18 B1921, B1923 Reinforcing Pivots 18

6 TABLE OF CONTENTS 7 TRIM 1000 Series Turns Fixed Pull Series Entry Trim , 3090P/C eforce Keyless Entry 35 A H Keyless Entry and Aperio Hub Wholesale Kit Turn MS Deadlock Lever , 4565 Series Deadlatch Handles for 4300, 4500, , Series Deadlatch Handles for MS , 4569 Eurostyle Deadlatch Handles , Series Deadlatch Handles for MS Deadlatch Paddle for 4300, 4500, X Deadlatch Paddle for MS+1890, Deadlatch Paddle for 4300, 4500, X Deadlatch Paddle for MS+1890, Heavy Duty Designer Deadlatch Handle 41 CYLINDERS 4024, 4025, 4029 Cylinder Pulls Mortise Cylinder 42 MS4043 Cylinder Guard Thumbturn Cam Disc Universal Cam Disc Cylinder Escutcheon Kit Rim Cylinder 44 ACCESSORIES 4014 Two-Point Conversion Kit Threshold Bolt Header Bolt Header Bolt (Pairs of Doors Only) Exit Indicator Mounting Bridges Universal Mounting Tab Kits for Installing MS Locks & Latches Dual Force Interconnected Deadbolt/Deadlatch Strikes Dual Force Interconnected Deadbolt/Deadlatch Strikes Series MS Deadlock Strikes , MS 4804 Series Strikes , 4902 Deadlatch Strikes Deadlatch Strike 48 THICK DOOR KITS 2190, 2290 Dual Force Interconnected Deadbolt/Deadlatch Thick Door Kit , 4569 Eurostyle Deadlatch Handles Thick Door Kits 49 FACEPLATES MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates 49 MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates 49 MS1850S Deadlocks Faceplates 49 MS1850SN Deadlocks (Long Throw) Faceplates 49 MS1850SN Deadlocks (Hookbolt) Faceplates Flushbolt Faceplates 50 MS+1890 Deadlock Faceplates Heavy Duty Deadbolt Faceplates Fire-Rated Mortise Exit Device Faceplates Short Throw Deadbolt Faceplates Standard Duty Deadlatch Faceplates Standard Duty Deadlatch Faceplates Heavy Duty Deadlatch Faceplates Heavy Duty Deadlatch Special Faceplates , 8300 Faceplates , 7160 Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates , 7170 Electric Strikes Faceplates 52 POWER PS-SE Power Supply 53 PS-1 Power Supply 53 PS-LR Power Supply , 4605, 4606 Transformer/Rectifier/Plezo Horn Power Transfer Device 54

7 8 DEADLOCKS DEADLOCKS RT1050D RITE Touch Digital Glass Door Lock MODELS RT1050D Digital glass door lock for single or double doors $ RT-5C-1050 Extra cards (package of 5 cards) $69.00 HOW TO ORDER Specify quantity and the following information. RITE TOUCH RT MODEL 1050D 1050D For single or double doors 1830 Bottom Rail Deadlock (Swingbolt) MODEL & FINISHES 313, 628 sw /32", or 1-1/8" cylinder height $ PRODUCT NO. DASH NO. (SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH) FINISH Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized 03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized MS1837 Series MS Two-Point Deadlock MODELS & FINISHES 313, 335, , 626 MS1837 Includes strike, 36" cylinder height $ $ MS1837 Cylinder height other than 36" (maximum cylinder height 65 ) $ $ PRODUCT NO. FINISH MS Dark Bronze Anodized 626 Satin Chrome 335 Black Anodized 628 Clear Anodized 605 Bright Brass If cylinder height other than 36 is required, specify exact height from bottom of door to cylinder center. Maximum cylinder height 65.

8 DEADLOCKS 9 MS1847 Series MS Deadlock/Deadlatch MODEL & FINISH 630 MS1847 Deadlock, stainless steel $69.00 PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK OR LATCH FINISH MS (See Configuration table below) 630 Satin Stainless VERT. (Blank) SELF- LATCHING SELF- LATCHING VERT MS1850S, MS1850S-050 Series MS Deadlock MODELS & BACKSETS 7/8" 31/32", 1-1/8", OR 1-1/2" MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike $92.00 $82.00 MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike $92.00 $82.00 MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike $96.00 $84.00 MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $92.00 $82.00 Schoolhouse function for above locks add $48. PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH MS185 0S S Flat 1 7/8" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized 1S Radius 2 31/32" 5 Hookbolt 6 RH or LHR 335 Black Anodized 1SW Radius with weatherstrip 3 1-1/8" 0 Non-Handed* 628 Clear Anodized 2S Bevel 4 1-1/2" *Any flat or radius faceplate, except Schoolhouse.

9 10 DEADLOCKS MS1850SN, MS1850SN-050 Series MS Deadlock (ANSI Size) MODELS MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike $ MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike $ MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $ PRODUCT NO. FACEPLATE ANSI SIZE BOLT SHAPE HANDING FINISH MS185 0 SN Flat 41 Straight 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 45 Hookbolt 6 RH or LHR 335 Black Anodized 2 Bevel 0 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate, except schoolhouse. MS1861 Series MS Bottom Rail Deadlock MODELS & FINISH 603 MS One-point deadlock, vertical bolt operation only $ sw ms 1861 MS Two-point deadlock, horizontal and vertical operation $ PRODUCT NO. BOLT OPERATION FINISH PACKAGING MS IB 01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed 02 Vertical and Horizontal Bolts If tube spacers are required, specify QUANTITY and LENGTH Two Point Deadlock MODEL & FINISH Two-point deadlock $ PRODUCT NO. PACKAGING IB IB Individually Boxed

10 DEADLOCKS 11 MS+1890 Series MS Deadlock/Deadlatch MODELS & FINISHES 628, 313, 335 MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MODEL MS+1893-IB Without faceplate, without strike $ PRODUCT NO. FACEPLATE BACKSET STRIKE SHAPE/LIP LENGTH HANDING FINISH MS Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized 1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 2 Bevel 21 Flat/Center Hung 4-1/2" Jamb For door thickness other than 1-3/4, contact factory. MS1950, MS Series MS Deadlock MODELS MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ Schoolhouse function for above locks add $48. PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH MS Flat 2 31/32" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 5 Hookbolt 6 RH or LHR 335 Black Anodized 1W Radius with weatherstrip 4 1-1/2" 0 Non-Handed* 628 Clear Anodized 2 Bevel *Any flat or radius faceplate except schoolhouse.

11 12 DEADLOCKS 2190 Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors MODELS & TRIM SETS 2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) 2190 Deadbolt/Deadlatch with flat/ centerhung 4 or 4.5 strike, standard series handle designation (01, 02, 03) 2190 Deadbolt/Deadlatch with flat or radius strike, designer lever series designation (MD through MW) STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ MODELS & FINISHES 628, 313, 335 N/A 2190 BOXED LOCK Less lever trim, with adjustable faceplate and choice of standard or radius strike $ EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $ PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH D 3 1-1/8" 0 None 1 Clear Anodized None 00 No Handle 03 Bright Brass (US3) 4 1-1/2" 1 2 Dark Bronze Standard Flat Anodized With Trim Set STANDARD SERIES: 04 Satin Brass (US4) 2 Radius Strike 3 2 With Electrified Black Anodized 335 Trim Set 01 Curve 10B Dark Bronze (US10B) 3 Flat/Center Hung 4" 3 Low Profile Trim 02 Round 32 Bright Stainless (US32) 4 Flat/Center Hung 4-1/2" 03 Square 32D Satin Stainless (US32D) DESIGNER SERIES: MD MJ ME MN (Handed) MG MV (Handed) MI MW Trim options 1 and 2 are for outswing doors only.

12 DEADLOCKS Dual Force Interconnected Deadbolt/Deadlatch for Wood or Hollow Metal Stile and Rail Doors MODELS & TRIM SETS 2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) 2290 Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW) STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 $ $ $ $ $ $ $ $ $ $ $ $ MODELS & FINISHES 313, 335, 628 N/A 2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike $ EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $ PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH D 3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3) 4 1-1/2" 1 Standard Flat 1 Clear Anodized With Trim Set STANDARD SERIES: 04 Satin Brass (US4) 2 Dark Bronze Anodized With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B) 3 Black Anodized Low Profile Trim 02 Round 32 Bright Stainless (US32) 03 Square 32D Satin Stainless (US32D) DESIGNER SERIES: MD MJ ME MN (Handed) MG MV (Handed) MI MW Trim options 1 and 2 are for outswing doors only Heavy Duty Deadbolt MODEL & FINISHES 121, , Deadlock and strike $ $ PRODUCT NO. FINISH To Match Dark Bronze Anodized Bright Brass 625 Bright Chrome 626 Satin Chrome

13 14 DEADLOCKS 4070 Series Short Throw Deadbolt (Projection Style) MODELS & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", or 1-1/8" backset $ Radius faceplate, 7/8", 31/32", or 1-1/8" backset $ Bevel faceplate, 7/8", 31/32", or 1-1/8" backset $ MODEL 4073 Without faceplate $ PRODUCT NO. FACEPLATE BACKSET HANDING FINISH Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized 2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate. 4189, 4190 Flush Locksets (Including Deadlock) MODELS & FINISHES STANDARD LOCK FACE STAINLESS STEEL LOCK FACE 4189-IB Flush lockset, individually boxed $ $ IB Flush lockset, individually boxed with cylinder $ $ IB Dummy flushset, individually boxed $70.00 $78.00 PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS FINISH KEYING OPTIONS PACKAGING IB 89 Without Cylinder 00 Without Lock 1 1" to 1-3/8" 90 With Cylinder 09 Radius 2 1-7/16" to 1-5/8" 95 Dummy 09S Radius Stainless Steel 10 Square 10S Square Stainless Steel /16" to 2" 130 To match Clear Anodized To match Dark Bronze Anodized To match Black Anodized Without Cylinder IB Individually Boxed 01 Keyed Different 02 Keyed Alike in Pairs

14 DEADLOCKS , 4431 Flush Locksets (Including Deadlock) MODELS & FINISH STANDARD LOCK FACE STAINLESS STEEL LOCK FACE 4430-IB ABS flush lockset, individually boxed $72.00 $ IB ABS flush lockset with cylinder, individually boxed $ $ IB ABS dummy flushset, individually boxed $31.00 $39.00 Kitted Options MODELS & FINISHES GRAY Grip pull for use with 4189, 4190 $ Grip pull for use with 4430, 4431 $37.00 PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS KEYING OPTIONS PACKAGING IB 30 Without Cylinder 00 Without Lock 00 1" to 1-5/16" 00 Without Cylinder IB Individually Boxed 31 With Cylinder 09 Radius /8" to 1-5/8" 01 Keyed Different 32 Dummy 09S Radius Stainless Steel /4" to 2" 02 Keyed Alike in Pairs 10 Square 10S Square Stainless Steel 5017 Wood Door Deadlock/Deadlatch MODELS & FINISH Stainless steel deadlock $ Self-latching deadlock $68.00 PRODUCT NO. LATCH CONFIGURATION Standard 02 Self Latching 5500 Wood Door Deadlock for Sliding Doors MODELS Lockset, strike and trim included for 1-1/4 thick sliding wood doors $ PRODUCT NO. DOOR THICKNESS FINISH /4" Thick 626 Satin Chrome

15 16 DEADLATCHES DEADLATCHES 4300 Steel Hawk Electrified Deadlatch (elatch) MODELS & FINISHES 313, 335, /32", 1-1/8", or 1-1/2" backset $ M Monitored option, 31/32, 1-1/8, or 1-1/2 backset. $ PRODUCT NO. BACKSET MONITORING STRIKE STIRKE SHAPE/LIP LENGTH FACEPLATE FINISH M /32" 0 None 1 Surface Mount (4304) 01 Flat/Standard Jamb 313 Dark Bronze Anodized 3 1-1/8" M Monitored 2 Mortised (4901) 4-5/8" 02 Radius/Standard Stiles** 335 Black Anodized 4 1-1/2" 17 Flat/Center Hung 4" Jamb** 628 Clear Anodized 21 Flat/Center Hung 4-1/2" Jamb** ** See ACCESSORIES for available 4901 strike options RITE Pack MODELS /32" backset, surface mount or mortise strike, 313 and 628 faceplates $ /8" backset, surface mount or mortise strike, 313 and 628 faceplates $ PRODUCT NO. BACKSET MONITORING STRIKE RITE PACK RP 2 31/32" 0 None 1 Surface Mount (4304) 3 1-1/8" 2 Mortised (4901) 4-5/8"

16 DEADLATCHES Standard Duty Deadlatch MODELS & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $ Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $ W Radius faceplate with weatherstrip, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $ Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $90.00 MODEL 4513-IB Without faceplate, without strike $68.00 PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" Dark Bronze Flat/Standard Jamb Anodized 1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized 1W Radius with weatherstrip 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 2 Bevel 4 1-1/2" 21 Flat/Center Hung 4-1/2" Jamb 4530 Standard Duty Deadlatch MODELS & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $ Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $ Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $ PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized 1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized 2 Bevel 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 21 Flat/Center Hung 4-1/2" Jamb

17 18 DEADLATCHES 4781 Two-Point Deadlatch with Paddle MODEL & FINISHES 313, 335, 628 US26, US26D 4781 Paddle includes dogging feature $ $ PRODUCT NO. OPERATION PADDLE FINISH 4781 T T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome 628 Clear Anodized US26D Satin Chrome 4900 Heavy Duty Deadlatch MODELS & FINISHES 313, 335, Any handing, 31/32", 1-1/8", or 1-1/2" backset $ W Radius with weatherseal faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MODEL 4913-IB Without faceplate or strike $97.00 PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH Standard 2 31/32" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized 11W Radius with Weatherseal 3 1-1/8" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile 335 Black Anodized 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 21 Flat/Center Hung 4-1/2" Jamb 4920AN Heavy Duty Deadlatch (ANSI Size) MODELS & FINISHES 313, 335, AN Flat faceplate, 1-1/2 or 2-3/4 backset with 4506 strike $ AN Flat faceplate, 1-1/2 or 2-3/4 backset without strike $ MODEL 4923AN-IB Without faceplate or strike $ PRODUCT NO. BACKSET HANDING STRIKE FACEPLATE FINISH 4920AN /2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized 5 2-3/4" 6 RH or LHR Strike 335 Black Anodized 628 Clear Anodized

18 FLUSHBOLTS & PIVOTS 19 FLUSHBOLTS & PIVOTS 1870 Cylinder-Operated Flushbolt MODELS & CYLINDER HEIGHT STANDARD CYLINDER HEIGHT CYLINDER HEIGHT OVER 12" (SPECIFY) 1870 Flat faceplate, 313, 335, or 628 finish $ $ Radius faceplate, 313, 335, or 628 finish $ $ W Radius faceplate with weatherstrip, 313, 335, or 628 finish $ $ Bevel faceplate, 313, 335, or 628 finish $ $ For cylinders over 12 specify cylinder height, 65 maximum. Contact factory for cylinder heights taller than 65. PRODUCT NO. FACEPLATE SHAPE BACKSET HANDING FINISH Flat 2 31/32" 0 Non-Handed* 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 5 LH or RHR 335 Black Anodized 1W Radius with weatherstrip 6 RH or LHR 628 Clear Anodized 2 Bevel *Any flat or radius faceplate. 1870HM Cylinder-Operated Flushbolt MODEL & FINISHES 313, 335, HM For hollow metal, 1-1/4" backset $ Cylinder height, 65" maximum. Contact factory for cylinder heights taller than 65. PRODUCT NO. FACEPLATE SHAPE HANDING FINISH 187 0HM HM Flat 0 Non-Handed* 313 Dark Bronze Anodized 2HM Bevel 5 LH or RHR 335 Black Anodized 6 RH or LHR 628 Clear Anodized *Any flat or radius faceplate Cylinder-Operated Flushbolt MODELS & FINISHES 628, , /4" backset, 13-1/2" cylinder height $ $ /4" backset, cylinder height other than 13-1/2" (maximum cylinder height 57.5") $ $ Maximum cylinder height PRODUCT NO. FINISH Dark Bronze Anodized 626 Satin Chrome 605 Bright Brass 628 Clear Anodized

19 20 FLUSHBOLTS & PIVOTS MS1880, MS1881 Two-Point Flushbolts MODELS & FINISHES 119, 121, 682 MS1880 Hourglass shaped turn $ MS1881 Teardrop shaped turn $ MODEL 119, 121, 682 TDK-1880 Tall door kit for doors over 84". 144" maximum $ MODEL TURN SHAPE CYLINDER HEIGHT* FINISH MS MS18 80 Hourglass 01 31" to 35" 119 Black 81 Teardrop /16" to 39" 121 Dark Bronze /16" 43" 682 Satin Chrome /16" to 47" /16" to 51" *Distance from floor to cylinder centerline. MS2180 Auto-Release Two-Point Flushbolt MODELS & FINISHES 119, 121, 130 MS2180 7, 8, 9, 10 door height $ PRODUCT NO. TURN SHAPE DOOR HEIGHT (FROM FLOOR TO TOP OF DOOR) FINISH TO MATCH MS Hourglass 07 Up to 7' Door 119 Black Anodized 1 Teardrop 08 Up to 8' Door 121 Dark Bronze Anodized 2 Flush 09 Up to 9' Door 130 Clear Anodized 10 Up to 10' Door B1921, B1923 Reinforcing Pivots MODELS & FINISH US2G B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing. $96.00 B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. $81.00 PRODUCT NO. MODEL B " 3 4-1/2"

20 EXIT DEVICES 21 EXIT DEVICES Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options. Split finishes (faceplate/pushbar) are not available Dummy Pushbar MODELS & FINISHES Dummy pushbar without mechanism, for doors NOT requiring an exit device M0 Active dummy bar without latching mechanism, without monitoring switches M1 Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar. 313, 335, 628 US4, US32D US3, US32 $ $ $ $ $ $ $ $ $ $ PRODUCT NO. MONITOR DOOR TYPE PUSHBAR FINISH WIDTH US FINISH M US32 00 Inactive Dummy Bar 3 Aluminum 0 US Finish inches US3 Bright Brass M0 Active Dummy Bar, no monitoring switches 4 Wood or hollow metal 1 Clear Anodized inches US4 Satin Brass M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized inches US32 Bright Stainless M2 Active Dummy Bar, two monitoring switches 3 Black Anodized inches US32D Satin Stainless 3100, 8100 Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Surface vertical rod for wood and hollow metal doors $1, $1, $1, T Top rod only $ $1, $ Fire-rated surface vertical rod $1, $1, $1, T Top rod only for metal doors $1, $1, $1, W Top rod only for wood doors $1, $1, $ MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH END CAPS OPTION FOR US FINISH SE M2-30 -US32D MEC 31 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass MEC Matching End Caps 81 Life-Safety 11 Clear W Top Rod only - SE Silent Electrification Anodized 628 Wood doors Latch Retraction M2 Dual Switch inches US4 Satin Brass 22 Dark Bronze Anodized Black Anodized Standard rod C Cylinder Dogging (non-fire rated devices ONLY) (Blank) No Monitor inches US32 Bright Stainless ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width * Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

21 22 EXIT DEVICES 8200 Narrow Stile Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Narrow stile surface vertical rod exit device $ $1, $1, T Top rod only $ $1, $ Kitted Options MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Tall door kit for doors up to 10' tall, for use with 8100, 8200 $ $ $ MODEL & FINISHES 313, 335, 628 US32D US Tall door kit for doors up to 10' tall, for use with 3100 $ $ MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH ED M2-36 -US3 END CAPS OPTION FOR US FINISH 82 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass MEC Matching End Caps 11 Clear Anodized Standard rod 22 Dark Bronze Anodized 313 SE Silent Electrification Latch Retraction C Cylinder Dogging M2 Dual Switch inches US4 Satin Brass (Blank) No Option inches US32 Bright Stainless 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width 3300, 8300 Mortise Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Mortise type exit device $ $1, $1, Fire-rated mortise type $1, $1, $ Kitted Options MODELS & FINISH 8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only US32D $ Open back strike for 1-3/4" thick doors $ MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONS MONITORING OPTION DOOR HANDING PUSHBAR FINISH DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening ED M -7 3 A36B 33 Fire Rated 0 US Finish 83 Life-Safety 1 Clear Anodized Dark Bronze Anodized Black Anodized Flat (3300 only) 2 Bevel (8300 only) LR Electric Latch Retraction SE Silent Electrification Latch Retraction C Cylinder Dogging (nonfire rated devices ONLY) ED Electric Dogging US FINISH M Single Switch 7 RHR 0 US Finish inches US3 Bright Brass M2 Dual Switch (Blank) No Monitor 8 LHR 1 Clear Anodized Dark Bronze Anodized Black Anodized inches US4 Satin Brass inches inches US32 Bright Stainless US32D Satin Stainless END CAPS OPTION MEC Matching End Caps - Without Options AXXB Alarmed Exit Device where XX is door opening width *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

22 EXIT DEVICES Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Mortise type exit device for single leaf $ $ $ Kitted Options MODELS US32D Long face strike for covering MS strike prep $ Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door $ * 2" thick door kit for use with 8300, 8400 $ * 2-1/4" thick door kit for use with 8300, 8400 $ * 2-1/2" thick door kit for use with 8300, 8400 $ * 2-3/4" thick door kit for use with 8300, 8400 $ * 3" thick door kit for use with 8300, 8400 $ Thermal door kit, 1/4" cladding, for use with 8400 $ Thermal door kit, 1/2" cladding, for use with 8400 $ MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONS MONITORING OPTION BACKSET DOOR HANDING * Order 8360-xx or 8460-xx long lip strike kit separately as required. PUSHBAR FINISH DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening SE M Life-Safety 0 US Finish 1 Clear Anodized Dark Bronze Anodized Black Anodized Flat, Radius, Bevel 4 Radius w/ Weatherstrip LR Electric Latch Retraction SE Silent Electrification Latch Retraction C Cylinder Dogging ED Electric Dogging - Without Options M Single Switch M2 Dual Switch (Blank) No Monitor 2 31/32" 7 RHR 0 US Finish inches 3 1-1/8" 8 LHR 4 1-1/2" 1 Clear Anodized Dark Bronze Anodized Black Anodized inches inches inches US FINISH US3 Bright Brass US4 Satin Brass US32 Bright Stainless US32D Satin Stainless AXXB Alarmed Exit Device where XX is door opening width END CAPS OPTION FOR US FINISH MEC Matching End Caps Radius with weatherstrip faceplate is not available in US finishes.

23 24 EXIT DEVICES 3600, 8500 Metal Door Concealed Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Concealed vertical rod exit device $ $1, $1, T Top rod only $ $ $ Fire-rated concealed vertical rod $1, $1, $1, T Top rod only $1, $1, $1, Kitted Options MODEL 3655 Tall door kit for doors taller than 66" above bar height, up to 10' $62.00 MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH T ED M -36 -US32D 36 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass 85 Life-Safety 11 Clear Anodized Standard rod 22 Dark Bronze Anodized 313 SE Silent Electrification Latch Retraction C Cylinder Dogging (non-fire rated devices only) M2 Dual Switch inches US4 Satin Brass (Blank) No Monitor inches US32 Bright Stainless END CAPS OPTION FOR US FINISH MEC Matching End Caps 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option Narrow Stile Concealed Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Concealed vertical rod exit device $ $1, $ T Top rod only $ $ $ Kitted Options MODEL 8655 Tall door kit for doors up to 10 for use with 8500, 8600 $59.00 MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening T SE M2-36 US FINISH 86 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass 11 Clear Anodized Standard rod 22 Dark Bronze Anodized 313 SE Silent Electrification Latch Retraction C Cylinder Dogging M2 Dual Switch inches US4 Satin Brass (Blank) No Monitor inches US32 Bright Stainless 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width END CAPS OPTION FOR US FINISH MEC Matching End Caps

24 EXIT DEVICES , 8700 Rim Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Rim type exit device $ $ $ Fire-rated rim type $ $1, $1, MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH END CAPS OPTION FOR US FINISH EL M1-36 -US3 MEC Fire Rated 00 US Finish 87 Life-Safety 01 Clear Anodized 628 EL Electric Latch Retraction (indicate 12V/24V) SE Silent Electrification Latch Retraction 02 Dark Bronze Anodized 313 C Cylinder Dogging M Single Switch inches US3 Bright Brass MEC Matching End Caps VOLTAGE 12 Volts M2 Dual Switch inches US4 Satin Brass 24 Volts (Blank) No Monitor inches US32 Bright Stainless 03 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless - Without Options AXXB Alarmed Exit Device where XX is door opening width (For EL Option Only) *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option Narrow Stile Rim Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Rim type exit device $ $ $ Kitted Options MODELS N/A 313, Mullion for doors up to 8' for use with 8700, 3700 $ Mullion for doors up to 10' for use with 8700, 3700 $ Aluminum mullion for doors up to 8' for use with 8800 $ Aluminum mullion for doors up to 10' for use with 8800 $ MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH END CAPS OPTION FOR US FINISH C M Life-Safety 00 US Finish 01 Clear Anodized 628 EL Electric Latch Retraction (indicate 12V/24V) SE Silent Electrification Latch Retraction M Single Switch inches US3 Bright Brass MEC Matching End Caps VOLTAGE 12 Volts M2 Dual Switch inches US4 Satin Brass 24 Volts 02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor inches US32 Bright Stainless 03 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless - Without Options AXXB Alarmed Exit Device where XX is door opening width (For EL Option Only)

25 26 EXIT DEVICES 3900, 8900 Wood Door Concealed Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Wood door concealed vertical rod exit device $ $1, $1, Fire-rated wood door concealed vertical rod $1, $1, $1, Kitted Options MODEL Tall door kit for doors up to 10 for use with 8900 $ Tall door kit for doors up to 10 for use with 3900 $62.00 MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH W LR M2-36 -US32 END CAPS OPTION FOR US FINISH 39 Fire Rated 00 US Finish W Top Rod Wood LR Electric Latch Retraction M Single Switch inches US3 MEC Matching Bright Brass End Caps 89 Life-Safety 11 Clear Anodized Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch inches US4 Satin Brass 22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor inches US32 Bright Stainless 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option. ACCESSORIES FOR EXIT DEVICES OPTIONS & FINISHES N/A US4, US32D US3, US32 SE Silent electrification motorized latch retraction $ EL Electric latch retraction for use with 3700, 8700, 8800 rim exit devices $ ELD Electric latch retraction with mechanical dogging for rim exit devices only $ LR Electric latch retraction $ ALARM Battery-operated alarmed exit device $ M1 Request to exit - monitor/single signal switch $ M2 Request to exit - monitor/double signal switch $ C Cylinder dogging $59.00 ED Electric dogging $ MEC Matching end caps $90.00 $112.00