Architectural Accessories & Door Trim

Transcription

1 Architectural Accessories & Door Trim McKinney Canadian List s Effective April 4, McKinney Products Company

2 general information Table of Contents General Information... GEN- GEN-8 es... GEN-4 GEN-5 Options... GEN-6 GEN-7 Index... GEN-8 Full Mortise s... FM- FM-23 MacPro... FM-22, FM-23 Electric s... EH- EH- MacPro Electric s... EH-7 Full Mortise Anchor Sets... AH- AH-4 Half Mortise s... HM- HM-3 Half Surface s and Back Plates... HS- HS-3 Full Surface s... FS- FS-2 Spring s & Pivots... SH- SH-4 MacPro... SH-2 Rescue Hardware... RH- Specialty s & Residential... SP- StormPro s... SP- Designer Hardware - Deco Tips... DH- DH-5 Aluminum Continuous Geared s... CG- CG-4 s Effective April 4, 206 GEN-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

3 ASSA ABLOY Door Security Solutions Canada, a division of ASSA ABLOY of Canada Ltd. and all of its current and future associated companies, subsidiaries and operating brands (hence forth referred to as ASSA ABLOY DSS Canada) reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion. The terms and conditions contained herein constitute the entire agreement between the parties. Purchase Orders, Quotations ( Quote ) requests, Acknowledgements or the like issued by the Purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY DSS Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY DSS Canada s authorized representatives. In the event of an acceptance of Purchaser s Purchase Order by ASSA ABLOY DSS Canada, the Purchaser agrees that such acceptance is solely conditioned on Purchaser s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the Purchaser s Purchase order. The terms and conditions in Purchaser s Purchase Order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY DSS Canada and the Purchaser. In the event that ASSA ABLOY DSS Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY DSS Canada to enforce or require strict performance of such term or condition in the future. s: All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of this price list does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an Errors and Omissions Excepted basis (commonly referred to as E.O.E.). We reserve the right to correct clerical, stenographic and other obvious errors at any time Terms: 2% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY DSS Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney s fees in connection with the recovery of any delinquent amount. Minimum Invoice: Minimum invoice for complete product is $ net product value. The minimum invoice for parts orders is $00.00 net product value. Any orders not totaling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%. Quotations: If ASSA ABLOY DSS Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance. The Quote number and project name must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount. The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 0% or more. The Purchaser will have to solicit a new quotation. Changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number. With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred any Distributor not authorized by ASSA ABLOY DSS Canada to sell its products. This would be inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor s ineligibility for Quotes, or other actions in ASSA ABLOY DSS Canada s discretion. ASSA ABLOY DSS Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor s request to quote a price other than ASSA ABLOY DSS Canada s standard list price and regardless of whether ASSA ABLOY DSS Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders. Special Orders: Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSA ABLOY DSS Canada. A minimum special handling charge of $50.00 will be added for non-cataloged product. Any additional labour or material required will be charged accordingly. Special products require special handling, and therefore standard lead times may not apply. Please consult with your Sales Representative for further details. High Security Orders: To ensure proper control of End User restricted Products, ASSA ABLOY DSS Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre. All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY DSS Canada. High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts. ASSA ABLOY DSS Canada reserves the right to request authorization from the end user if necessary before the order is processed. Changes / Cancellation of Orders: Changes or cancellations to a non stock order that has been released to production will be subject to a charge of costs for material and labour general information s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-

4 general information expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer s original order. All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY DSS Canada reserves the right to make a reasonable cancellation charge based on expenses incurred. Packaging: Many items are defined as to Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project. Delivery: Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to process an order. ASSA ABLOY DSS Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates. ASSA ABLOY DSS Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order. ASSA ABLOY DSS Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY DSS Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date. Terms of Shipment: All products are shipped FOB the factory or the distribution center unless otherwise agreed to in writing from ASSA ABLOY DSS Canada. Title to and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department. All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY DSS Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser. ASSA ABLOY DSS Canada will ship via the best possible carrier. Shipments at the customer s request will be prepaid and any up-charge (actual cost less the amount negotiated by ASSA ABLOY DSS Canada) will be added to the invoice. Claims: In the event of ASSA ABLOY DSS Canada or Customer error, claims for shortages, pricing errors and/ or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier. Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY DSS Canada Customer Service Representative upon submittal of the order. ASSA ABLOY DSS Canada will obtain requested insurance and the additional cost will be included on Customer s invoice. Invoice Deduction: A ASSA ABLOY DSS Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms. Returned Goods: No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY DSS Canada to not accept returns of any materials that are correctly furnished as per the Distributor s Purchase Order. Mercury and Turbo material may be returned with approval, if ASSA ABLOY DSS Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have been shipped and invoiced in the previous sixty (60) days. Returns will be at the distributor s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling. Return of product due to customer order error or accommodation must be pre-arranged with ASSA ABLOY DSS Canada and approved in writing by Sales Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY DSS Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer. Defective goods that are out of warranty period will not be accepted for return. Products that are masterkeyed, special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective. Procedure: Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY DSS Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty (60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some directions may apply to return the goods to the original manufacturer) ASSA ABLOY DSS Canada is not liable for damages to product during shipping. No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only. Taxes: s do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith. s Effective April 4, 206 GEN-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

5 Governing Law: The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Limited Warranty: ASSA ABLOY DSS Canada represents and warrants the products against defective material and workmanship under normal use and service. ASSA ABLOY DSS Canada further warrants the to meet BHMAC quality standards at the time of delivery. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-assa ABLOY DSS Canada products or parts. The only liability of ASSA ABLOY DSS Canada in tort or contract whether under this warranty or otherwise, shall be limited to the repair or replacement of any product or component part which shall prove defective as covered by this warranty, within the stated time period listed below, after delivery to the original purchaser. The items covered by the Limited Warranty and the warranty period are shown in the accompanying schedule(s). ASSA ABLOY DSS Canada will not pay for the cost of repair performed other than in accordance with this warranty. Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective as covered by this warranty. A brief description of the defect will be required. Product will be examined upon return. In the event such examination reveals a defect covered by this warranty, the product will be repaired or replaced. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ASSA ABLOY DSS Canada and its subsidiaries, associated companies and partners SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY. Except as expressly set forth ASSA ABLOY DSS Canada makes no other representations or warranties, expressed or implied at law or in equity, with respect to the products or their characteristics, quality or performance, including without limitation, the implied warranties of merchantability, fitness for a particular purpose or non infringement of any intellectual property rights of third parties and any such representations and warranties are hereby expressly disclaimed. SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE. Indemnity: Purchaser shall indemnify ASSA ABLOY DSS Canada and hold ASSA ABLOY DSS Canada harmless against all claims, liability, loss or other damages (including costs, legal or otherwise incurred by ASSA ABLOY DSS Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY DSS Canada possession or control. Force Majeur: ASSA ABLOY DSS Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God, fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY DSS Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies. In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate. Copyrights and Patents: All products in ASSA ABLOY DSS Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY DSS Canada. WARRANTY McKinney products are not designed for or intended for aftermarket modification. The warranty on McKinney products becomes void if the product is modified in any way, regardless of whether the modification causes or contributes to any alleged defect. Warranty voiding modifications include, but are not limited to, thirdparty electrification of non-electric products and/or the installation of non-approved or non-mckinney components. If a McKinney product is modified it no longer meets industry certification and quality control standards applicable to the original product and is no longer a genuine McKinney product. A modified product may not be sold as a McKinney product and no McKinney trademarks or certification marks based on the original McKinney product, such as (but not limited to) U.L. or ANSI/BHMA marks, may appear anywhere on the modified product or on any packaging, literature or instructions sold with the modified product. All original McKinney packaging and literature carries McKinney trademarks and must be destroyed if the original McKinney product is modified. Portions of the product that carry a McKinney trademark or certification mark must be discarded and/or replaced by the party making the modification. U.L. and other certification testing and markings are also the responsibility of the party making the modification. The use of McKinney trademarks on modified products constitutes trademark infringement. Trademarks: McKinney is a registered trademark of McKinney Manufacturing Company. Other product brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purpose only. general information s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-3

6 general information McKinney and B.H.M.A. Symbols BHMA Code Base Material Ferrous (Steel) Non-Ferrous (Brass or Stainless) 600 P A B A A D D McKinney FINISH s Effective April 4, 206 GEN-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

7 McKinney and Government Symbols U.S. Description McKinney U.S.P. Prime Powder Coat for Painting P Listed U.S. 3 Bright Brass 3 Listed U.S. 4 Dull Brass 4 Listed U.S. 5 Dull Brass, Oxidized 5* 30% over 0B U.S. 7 Brass, Nickel Oxidized, Bright Relieved 7* 30% over 0B U.S. 9 Bright Bronze 9 30% over 0B U.S. 0 Dull Bronze 0 Listed U.S. 0A Antique Bronze, Oiled and Lacquered 0A Listed U.S. 0B Antique Bronze, Oiled 0B Listed U.S. Dull Bronze, Oxidized * 30% over 0B U.S. 4 Bright Nickel Plated 4 Same as 26 U.S. 5 Dull Nickel Plated 5 Same as 26D U.S. 5A Nickel Oxidized Relieved 5A* P.O.A. U.S. 20 Statuary Bronze, Light 20* 30% over 0B U.S. 20A Statuary Bronze, Dark 20A* 30% over 0B U.S. 26 Bright Chromium 26 Listed U.S. 26D Dull Chromium 26D Listed U.S. 32 Polished Stainless Steel 32 Listed U.S. 32D Dull Stainless Steel 32D Listed general information * Check with the factory for availability and pricing on these finishes McKinney Powder Coat es MicroShield Agion Antimicrobial 32DBIO P.O.A. Aluminum AP Listed Bright Brass w/ Clear Powder Coat 3-C 30% over 0B Dull Brass w/ Clear Powder Coat 4-C 30% over 0B Dark Bronze Powder Coat D-3 Same as AP Black Powder Coat D-4 Same as AP Dark Oxidized Satin Bronze 0-BE 5% Less than 0B CPC or 0B over Stainless add 0% to 32D price. Every effort is made by McKINNEY to furnish finishes which do comply with the Standard, however we cannot guarantee that our finish will match other manufacturers finish. Where a special finish or a matched finish is required, a sample must be submitted with the order. * P.O.A. on Application Consult the factory for pricing and availability on these custom finishes. 722 or EB 30% over 0B for clear coats s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-5

8 general information No Logo Options/Additions Where Not Listed s supplied less McKINNEY logo (not available on LISTED s) - New lead times will apply and factory may need to adjust lead times after lead time of order is originally acknowledged. Blank s (No Screw Holes) Blank hinges regularly furnished without swaging (flat back) unless otherwise specified. Bulk Package, Suffix BP Consult factory for availability Special Swaging Special Swaging Add 30% to price Add 30% to price No additional charge Add 30% to price Add $6.50 to electrical option add for all Swing Clear s CC Option- Concealed Circuit Brass, Steel or Stainless Steel Base Add 4 wires - suffix CC4 $ wires - suffix CC6 $ wires - suffix CC8 $ wires - suffix CC0 $ wires - suffix CC2 $ Extra Long Leads (over 2") for CC4, QC4 $7.00 per foot Extra Long Leads (over 2") for CC6, QC6 $25.00 per foot Extra Long Leads (over 2") for CC8, QC8 $32.00 per foot CC Option- Concealed Circuit with 2 8-Gauge Wires Brass, Steel or Stainless Steel Base Add 4' Lead Add 2 wires - suffix CC2-8 $ $ wires - suffix CC4-8 $ $ wires - suffix CC6-8 $ $ wires - suffix CC8-8 $77.00 $ wires - suffix CC0-8 $ $50.00 * s are provided with two 8-gauge wires, additional wires will remain standard 28-guage QC Option- Electrolynx Quick Connect Concealed Circuit Brass, Steel or Stainless Steel Base Add 2 wires - suffix Qc2 $ wires - suffix QC4 $ wires - suffix QC6 $ wires - suffix QC8 $ wires - suffix QC0 $ wires - suffix QC2 $ Extra 6" Pigtail for QC Butt Add 0977 QC2 Pigtail $ QC4 Pigtail $ QC8 Pigtail $32.00 MG 6 Mortar Guard ( #63333) $4.00 each s Effective April 4, 206 GEN-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

9 Options/Additions Where Not Listed PoE Option - Power over Ethernet Available on 4 2" and height hinges only Add Brass or Steel Base $,38.00 MM Option - Magnetic Monitoring Add Magnetic Monitoring - suffix MM $ Extra Heavy Magnetic Monitoring - suffix EHM $ MM Magnet Assembly Only $09.00 EHM Magnet Assembly Only $3.00 MM Magnet Assembly & Switch $6.00 EHM Magnet Assembly & Switch $ general information Non Removable Door Suffix NRD Moderne only (2 Knuckle) One NRD provided per set of 3 hinges Non Removable Pins Set screw in barrel suffix (NRP NRP SET SCS ONLY $.50 EA NO DISC) Raised Barrel Full Mortise s Bearing s Only Raised barrel prefix RB Standard and Heavy Weight. x 4 2" Heavy Weight Only. s are NRP and reversible for handing Round Corner Prefix RC Add $6.00 per door Add $0.00 each Add $37.00 each 4" round corner full mortise only Add $2.00 each 5 32" round corner full mortise 4 2" or larger Add $2.00 each Round corner hinges (RC) will be furnished in 4" radius unless otherwise specified Replacement steel pins standard weight Replacement steel pins heavy weight Beveled s (where doors are beveled on hinge side specify as follows) For 2 knuckle and 3 knuckle hinges use 5000 series. Example TA793 or TA792 will become TA5793 or TA5792 For 2 knuckle and 5 knuckle hinges use a 4000 series. Example TA274 or T4A3386 will become a TA474 or T4A4386 TA273 will become a TA473, A TA3350 becomes a TA4350 Safety Stud Featured Suffix SSF Prison Safety Feature Suffix PSF (available HTA386 (32D) only) Slip in s Suffix SIH Type I (Handed), SIH Type II Regular weight bearing hinge only (Indicate hand when ordering) Add $3.00 each Add $3.00 each If a part # is not shown in price book for Beveled Edge, add 0% to the price of Square Edge Add $4.00 each Add $33.00 each Add $27.00 each Special Screws ( 2" x 2-24 machine" - 4" x 2 wood) Consult factory for price and minimum requirements on additional sizes Steel Spanner Head $4.00 each Brass Spanner Head $5.00 each Stainless Steel Spanner Head $6.00 each Spanner bit holder tool $38.00 each Spanner bit (for use in holder) $23.00 each TORX Pin head security screws - Suffix TXS, machine screws provided. Wood screws by request only Steel Torx $4.00 each Stainless Torx $4.00 each TORX bit* $36.00 each TORX bit holder tool* $49.00 each *#20-2" x 2-24 & 4" x 2 wood screw *#25-2" x 4"-20 machine screw, 2" x 2 wood screw TIPS -- Hospital Tips Prefix H Regular weight plain bearing, oil impregnated or ball Heavy weight oil impregnated or ball Solid Brass Ball Tips suffix x BT up to 6" in height Solid Brass Steeple Tips suffix x ST up to 6" in height Deco Tips for two and three knuckle suffix standard weight hinges only, where not listed, suffix RT, FT, GT, LT Architectural Hardware Presentation Folder FS86 Perforated cardboard shims # 7588 Add $26.00 each Add $26.00 each Add $3.00 each Add $3.00 each Add $8.00 each $25.00 net $2.00 per hundred s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-7

10 general information Index 45 SH SH SH-2 00 SH SP- 44 SP- 458 SP- 502, 502R SH- 522 SH- 552 SH- 572 SH SH MRB SH RB SH SH SH SH-3 BP-0 HS-3 BP- HS-3 BP-2 HS-3 CSS-9 MISC- DLS-8 MISC- DS-6 MISC- Deco s DH- DH Series DH- DH-5 EP-5J MISC-2 ET HINGES Call for info. H8007 SH-4 HS00 SH-3 HTA386 FM-2 HTA74 FM-4 HTA786 FM-5 HTA274 FM- HTB386 FM-2 HTB786 FM-5 J300 SH-3 K-MCK-2HD CG-4 MCK-2HD CG-4 MCK-4HD CG-4 MCK-22HD CG-4 MCK-25HD CG-4 MCK-54HD CG-5 MCK-58HD CG-5 MCK-WTHD CG-4 MCK-FM300 CH-6 MCK-FM327 CH-7 MCK-FM3500 CH-8 MCK-FS30 CH-7 MCK-FS302 CH-8 MCK-FS309 CH-8 MCK-FS32 CH-8 MCK-FS350 CH-8 MCK-FS3502 CH-9 MCK-FM3700 CH-9 MCK-FS370 CH-9 MCK-FS3702 CH-9 MCK-HG305 CH-6 MCK-HG306 CH-7 MCK-HG30 CH-8 MCK-HG3 MCK-HG35 MCK-HG322 MCK-HG323 MCK-HG326 MCK-HG3505 MCK-HM304 MCK-HS303 MCK-HS3703 MG-6 MP79 MPB79 MPS60 MPB68 MPB9 MPB99 MPS60 MPS679 PH-4 SP3786 SP3386 SQ333 T234 T274 T2772 T2774 TA34 TA37 TA372 TA374 TA38 TA382 TA384 TA386 TA39 TA392 TA393 TA394 TA74 TA77 TA772 TA774 TA78 TA782 TA784 TA786 TA789 TA79 TA792 TA793 TA794 TA797 TA795 TA796 TA234 TA2372 TA2395 TA2398 TA274 CH-7 CH-6 CH-6 CH-6 CH-6 CH-9 CH-7 CH-7 CH-9 GEN-4 FM-24 FM-24 SH-2 FM-25 FM-25 FM-25 SH-2 SH-2 SP- SP- SP- DH-5 FM-6 FM-8 FM-9 HS-2 HM-2 FM- FS- HS- HM- FS- HS- HM- FM-2 AH- AH- AH- AH- FM-3 FM-4 FS- HS- HM- FS- HS-2 HM- HM-2 FM-5 HM-2 AH-2 AH-3 AH-3 AH-3 FS-2 FM-5 HS-2 FM-6 FM-7 HS- FM-8 FM-8 FM-9 FM-0 TA273 TA277 TA2772 TA2774 TA2798 TA2895 TA333 TA3350 TA3374 TA3383 TA3750 TA4395 TA4895 TA5392 TA5393 TA5394 TA5792 TA5793 TA5794 TA234BT TA234ST TCA234 TCA274 TCA3386 TCA3786 T4A338 T4A3382 T4A3384 T4A3386 T4A3395 T4A378 T4A3782 T4A3784 T4A3786 T4A3795 T4A3796 T4A3789 T4A4795 T4B3386 T6A3786 FM-2 FM-4 FS-2 HS-2 HM-2 FM-4 FM-5 FM-5 FM-6 FM-7 FM-7 FM-8 HM-2 DH-5 FM-2 FM-5 FM-5, FM-24 AH-2 AH-2 AH-3 AH-3 AH-4 AH-4 FM-8 FM-8 FM-7 FM-0 FM- FM-9 FM-23 FS-2 HS-3 HM-3 FM-8 FM-20 FM-20 FS-2 HS-3 HM-3 FM-2 FM-22 FM-23 HS-3 HM-3 FM-23 FM-9 FM-23 s Effective April 4, 206 GEN-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

11 Standard Weight Three Knuckle Non-Ferrous Bearings TA34 FULL MORTISE HINGES 3 2" x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 6933 P AP A B D D P AP A B D D P AP A B D D D-NRP P AP A B D D NRP x 4" 27 mm x 0.60 mm x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm NRP D-NRP D-NRP P AP A B D D P AP A B D D P AP A B D D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-

12 FULL MORTISE HINGES Heavy Weight Three Knuckle TA " x 4" 4.30 mm x 0.60 mm x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) D-NRP P AP A B D D D-NRP D-NRP P AP A B D D D-NRP D-NRP x 27 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm P AP A B D D P AP A B D D Hospital Tip Heavy Weight Three Knuckle Non-Ferrous Bearings TA " x 6" 4.30 mm x mm D Stainless Steel Institutional s HTA386 HTA386 x PSF Packed with 2 " x 2-24 Torx Pin Head Security Machine Screw D D HTB386 MSP Set Option A includes three hinges with hospital tips. Top and bottom hinges supplied with PSF and SSF, middle hinge is not. $ set Option B - QC8 includes three hinges with hospital tips. Top and bottom hinges supplied with PSF and SSF, middle hinge is provided with QC and no PSF of SSF. $,97.00 QC8 $ QC2 s Effective April 4, 206 FM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

13 Steel Standard Weight Three Knuckle Bearing TA74 3 2" x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm 6978 P AP A B D P AP A B D " x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm (NRP) P AP A B D D D D-NRP P AP A B D D D P-NRP D-NRP NRP NRP B-NRP FULL MORTISE HINGES Hospital Tip HTA74 Steel Standard Weight Three Knuckle Bearing TA D Steel Standard Weight Three Knuckle Bearing Wide Throw TA74 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm P AP A B D P AP A B D " x 6" 4.30 mm x 52.4 mm P AP B D D D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-3

14 FULL MORTISE HINGES Steel Heavy Weight Three Knuckle Bearing TA786 Steel Heavy Weight Three Knuckle Hospital Tip HTA " x 4" 4.30 mm x 0.60 mm -NRP x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm 6" x 6"* mm x mm D D-NRP P AP A B D P-NRP B-NRP D-NRP P AP A B D P AP A B D P AP A B D * For 6" x 4½" or 6" x use price of 6" x 6" x 4 2" 27 mm x 4.30 mm s are packed with 2" x 2-24 Torx Pin Head Machine Screws. Steel Swing Clear Heavy Weight 3 Knuckle Bearing Reversible TA " 4.30 mm 27 mm P D D x PSF P AP A B D P AP A B D D For swing clear heavy weight three knuckle bearing, beveled edge application orderta5795. (s are reversible and non-handed.) s Effective April 4, 206 FM-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

15 Non-Ferrous Standard Weight 5 Knuckle T " x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm P A B D D P A B D D P A B D D NRP x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm Non-Ferrous Standard Weight 5 Knuckle Bearing TA " x 3 2" mm x mm 6020 P A B D D " x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm P A B D D B-NRP D-NRP D-NRP P A B D D P A B D D P A B D D P A B D D Continued on next page FULL MORTISE HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-5

16 FULL MORTISE HINGES TA Non-Ferrous Standard Weight 5 Knuckle Bearing Continued 4 2" x 4"-NRP 4.30 mm x 0.60 mm x 4" 27 mm x 0.60 mm D-NRP D-NRP B-NRP P A B D D P-NRP NRP NRP B-NRP D-NRP D-NRP P A B D D x 4 2" 27 mm x 4.30 mm x 4 2"-NRP 27 mm x 4.30 mm x 27 mm x 27 mm 6" x 6" mm x mm 6003 P A B D D D-NRP D-NRP B-NRP P A B D D P A B D D Non-Ferrous Standard Weight 5 Knuckle Concealed Bearing TCA P A B D D x 27 mm x 27 mm P A B D D s Effective April 4, 206 FM-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

17 Non-Ferrous Standard Weight Five Knuckle Ball Tip TA234BT Non-Ferrous Standard Weight 5 Knuckle Concealed Bearing Non-Ferrous Swing Clear Standard Weight TA2395 FULL MORTISE HINGES " 4.30 mm D D mm TA D s are NRP and Reversible. Non-Ferrous Standard Weight Five Knuckle Steeple Tip TA234ST Non-Ferrous Standard Weight Five Knuckle Wide Throw TA " x 6" 4.30 mm x mm 4 2" x 8" 4.30 mm x mm D D D Steel Standard Weight 5 Knuckle T " x 3 2" 5535 P mm x mm AP " x 4" mm x 0.60 mm A B " x 4" D P mm x 0.60 mm AP " x 4" mm x 0.60 mm Continued (NRP) 4" x 4" 0.60 mm x 0.60 mm 555 0A B D P AP A B D D D P-NRP D-NRP Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-7

18 FULL MORTISE HINGES Steel Standard Weight 5 Knuckle Continued T274 (NRP) P AP A B E 0BE D D D P-NRP AP-NRP NRP NRP NRP B-NRP NRP D-NRP x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm P AP A B D D D P AP A B D D D Steel Standard Weight 5 Knuckle Bearing TA " x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm P AP A B D P AP A B D " x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm (NRP) P AP A B E 0BE D D D P-NRP D-NRP A-NRP B-NRP Continued on next page s Effective April 4, 206 FM-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

19 Steel Standard Weight 5 Knuckle Bearing Continued TA FULL MORTISE HINGES (NRP) x 4" 27 mm x 0.60 mm P AP A B E 0BE D D D P-NRP AP-NRP NRP NRP NRP NRP A-NRP B-NRP E 0BE-NRP NRP D-NRP D3-NRP D4-NRP P AP D Steel Standard Weight 5 Knuckle Concealed Bearing TCA x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) x 27 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 5600 P AP A B D P-NRP D-NRP P P-NRP AP A B D P AP A B D " x 4" 4.30 mm x 0.60 mm P AP A B D D D P AP A B D D D Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-9

20 FULL MORTISE HINGES Steel Standard Weight 5 Knuckle Concealed Bearing Continued TCA274 x 4 2" 27 mm x 4.30 mm Steel Standard Weight 5 Knuckle Hospital Tip Bearing HTA P AP A B D D D x 27 mm x 27 mm P AP A B D D D P D Steel Standard Weight 2 Knuckle Bearing TA " x 3 2" mm x mm R.H P 4.00 L.H P 4.00 R.H AP 4.00 L.H AP 4.00 R.H L.H R.H L.H R.H " x 3 2" mm x mm L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H D L.H D R.H D L.H D Continued on next page s Effective April 4, 206 FM-0 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

21 Steel Standard Weight 2 Knuckle Bearing Continued TA FULL MORTISE HINGES 4" x 4" 0.60 mm x 0.60 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H D L.H D R.H D L.H D " x 4" 4.30 mm x 0.60 mm R.H P 4.00 L.H P 4.00 R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H D L.H D R.H D L.H D R.H P 4.00 L.H P 4.00 R.H. 656 AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H D L.H D R.H D L.H D x 4" 27 mm x 0.60 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H D L.H D R.H D L.H D Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-

22 FULL MORTISE HINGES Steel Standard Weight 2 Knuckle Bearing Continued TA273 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H D L.H D R.H D L.H D R.H P 7.00 L.H P 7.00 R.H AP 2.00 L.H AP 2.00 R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D 2.00 L.H D 2.00 R.H D L.H D R.H D L.H D Steel Standard Weight Wide Throw 5 Knuckle Bearing TA " x mm x 27 mm 3 2" x 6" mm x 52.4 mm P AP A B D P AP A B D " x 6" 0.60 mm x 52.4 mm 4" x 7" 0.60 mm x 77.8 mm 4 2" x 6" 4.30 mm x 52.4 mm P AP A B D P AP A B D P AP A B D Continued on next page s Effective April 4, 206 FM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

23 4 2" x 7" 0.60 mm x 77.8 mm 4 2" x 8" 4.30 mm x mm Steel Standard Weight Wide Throw 5 Knuckle Bearing Continued TA P AP A B D P AP A B D x 7" 27 mm x 77.8 mm x 8" 27 mm x mm 5957 P AP A B D P AP A B D FULL MORTISE HINGES Steel Standard Weight Swing Clear 5 Knuckle Bearing TA " 4.30 mm P AP A B D TA mm TA mm D D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-3

24 FULL MORTISE HINGES Non-Ferrous Standard Weight 2 Knuckle Bearing TA " x 3 2" mm x mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D " x 4" 0.60 mm x 0.60 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D " x 4" 4.30 mm x 0.60 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B Continued 4 2" x 4" 4.30 mm x 0.60 mm R.H L.H R.H D L.H D R.H L.H R.H D L.H D R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D x 4" 27 mm x 0.60 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D Continued on next page s Effective April 4, 206 FM-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

25 Non-Ferrous Standard Weight 2 Knuckle Bearing Continued TA333 FULL MORTISE HINGES x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D Non-Ferrous Heavy Weight 2 Knuckle Bearing TA3350 R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-5

26 FULL MORTISE HINGES Non-Ferrous Heavy Weight 2 Knuckle Bearing Continued TA3350 x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H L.H R.H D L.H D Non-Ferrous Heavy Weight 5 Knuckle Bearing T4A3386 (NRP) 680 P A B D D NRP B-NRP D-NRP D-NRP x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) 6879 P A B D D NRP B-NRP D-NRP D-NRP Continued on next page s Effective April 4, 206 FM-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

27 Non-Ferrous Heavy Weight 5 Knuckle Bearing Continued T4A FULL MORTISE HINGES x 27 mm x 27 mm 6938 P A B D D " x 52.4 mm x 27 mm P A B D D Non-Ferrous Heavy Weight 5 Knuckle Bearing T4B3386 TCA3386 6" x 6" 52.4 mm x 52.4 mm T6B3386 8" x 8" mm x mm 6462 P A B D D D x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm Wide throw not available in TCA Series 6836 P A B D D P A B D D P A B D D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-7

28 FULL MORTISE HINGES Non-Ferrous Heavy Weight 5 Knuckle Bearing T4A " x 4.30 mm x 27 mm 4 2" x 6" 4.30 mm x 52.4 mm 4 2" x 7" 0.60 mm x 77.8 mm 4 2" x 8" 4.30 mm x mm 7097 P A B D D P A B D D P A B D D P A B D D x 6" 27 mm x 52.4 mm x 7" 27 mm x 77.8 mm x 8" 27 mm x mm P A B D D P A B D D P A B D D Heavy Weight Stainless Steel Swing Clear T4A3395 s are NRP 4 2" 4.30 mm 27 mm D D s Effective April 4, 206 FM-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

29 Steel Heavy Weight 2 Knuckle Bearing TA3750 x 4 2" 27 mm x 4.30 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H Continued on next column Continued x 4 2" 27 mm x 4.30 mm L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D x 27 mm x 27 mm R.H P L.H P R.H AP L.H AP R.H L.H R.H L.H R.H L.H R.H A L.H A R.H B L.H B R.H L.H R.H D L.H D FULL MORTISE HINGES Steel Heavy Weight 5 Knuckle Bearing T4A3786 s Effective April 4, P AP A B E 0BE D (NRP) x 4 2" 27 mm x 4.30 mm x 4 2" 27 mm x 4.30 mm (NRP) P-NRP NRP D-NRP P AP A B D P-NRP D-NRP Continued on next page Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-9

30 FULL MORTISE HINGES T4A Steel Heavy Weight 5 Knuckle Bearing Continued x 27 mm x 27 mm P AP A B D " x 52.4 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm P AP A B D P AP A B D Steel Heavy Weight Wide Throw 5 Knuckle Bearing T4A " x 4.30 mm x 27 mm 4 2" x 6" 4.30 mm x 52.4 mm 4 2" x 7" 0.60 mm x 77.8 mm 7270 P AP A B D P AP A B D P AP A B D " x 8" 0.60 mm x mm x 6" 27 mm x 52.4 mm x 7" 27 mm x 77.8 mm x 8" 27 mm x mm 7280 P AP A B D P AP A B D P AP A B D P AP A B D s Effective April 4, 206 FM-20 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

31 Steel Heavy Weight 6-Bearing T6A Steel Heavy Weight Swing Clear 5 Knuckle Bearing T4A3795 FULL MORTISE HINGES 8" x 6" mm x 52.4 mm Steel Heavy Weight 5 Knuckle Concealed Bearing TCA P AP A B D " 4.30 mm 27 mm P AP A B D P AP A B D x 4 2" 27 mm x 4.30 mm x 27 mm x 27 mm P AP A B D P AP A B D P AP A B D Steel Swing Clear Heavy Weight Beveled Edge Bearing T4A " 4.30 mm 27 mm P AP A B D P AP A B D s are NRP, reversible and non-handed s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-2

32 FULL MORTISE HINGES Steel Standard Weight Swing Clear 5 Knuckle Bearing For Beveled Edge Doors TA " 4.30 mm P AP A B D s are NRP, reversible and non-handed MacPro s Steel Standard Weight 5 Knuckle MP79 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm MacPro Steel Standard Weight Five Knuckle Bearing MPB P B D P NRP NRP NRP B NRP NRP D NRP P B E 0BE D P NRP NRP NRP B NRP NRP D NRP 3.00 These hinges are not subject to any other discounts " x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm P B D P NRP NRP NRP B NRP NRP D NRP P B E 0BE D P NRP NRP NRP B NRP E 0BE NRP NRP D NRP NRP s Effective April 4, 206 FM-22 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

33 MacPro Steel Heavy Weight Five Knuckle Bearing MPB68 x 4 2" 27 mm x 4.30 mm D D NRP D D NRP MacPro Non-Ferrous Heavy Weight Five Knuckle Bearing MPB99 x 4 2" 27 mm x 4.30 mm D D NRP D D NRP FULL MORTISE HINGES MacPro Non-Ferrous Standard Weight Five Knuckle Bearing MPB D D NRP These hinges are not subject to any other discounts s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-23

34 ELECTRIC HINGES Electric s CC-4 TA234 - CC4 4 2" x 4" 4.30 mm x 0.60 mm TA274 - CC4 4 2" x 4" 4.30 mm x 0.60 mm T4A CC4 x 4 2" 27 mm x 4.30 mm B D D B D D P AP A B D D D P AP A B D D D B D D D D T4A CC4 x 4 2" 27 mm x 4.30 mm Electric s CC-6 TA234 - CC6 4 2" x 4" 4.30 mm x 0.60 mm TA274 - CC6 4 2" x 4" 4.30 mm x 0.60 mm 7280 P D B D D B D D P AP A B D D D P AP A B D D D T4A CC P AP A B D D D s Effective April 4, 206 EH- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

35 Electric s CC-6 T4A CC6 x 4 2" 27 mm x 4.30 mm T4A CC6 x 4 2" 27 mm x 4.30 mm Electric s CC-8 TA234 - CC8 4 2" x 4" 4.30 mm x 0.60 mm B D D D D P AP A B D D D P D B D D B D D Electric s CC-8 TA274 - CC8 4 2" x 4" 4.30 mm x 0.60 mm T4A CC8 x 4 2" 27 mm x 4.30 mm T4A CC8 x 4 2" 27 mm x 4.30 mm 746 P AP A B D D D P AP A B D D D B D D D D P AP A B D D D D ELECTRIC HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-2

36 ELECTRIC HINGES Electric s QC-2 TA234 - QC2 4 2" x 4" 4.30 mm x 0.60 mm TA274 - QC2 4 2" x 4" 4.30 mm x 0.60 mm T4A QC2 x 4 2" 27 mm x 4.30 mm T4A QC B D D B D D P AP A B D D D P AP A B D D D B D D D D P AP A B D D D Electric s QC-2 T4A QC2 x 4 2" 27 mm x 4.30 mm Electric s QC-4 TA234 - QC4 4 2" x 4" 4.30 mm x 0.60 mm TA274 - QC4 4 2" x 4" 4.30 mm x 0.60 mm 7356 P D B D D B D D P AP A B D D D P AP A B D D D s Effective April 4, 206 EH-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

37 Electric s QC-4 T4A QC4 x 4 2" 27 mm x 4.30 mm T4A QC4 x 4 2" 27 mm x 4.30 mm B D D D D P AP A B D D D P D Electric s QC-6 TA234 - QC6 4 2" x 4" 4.30 mm x 0.60 mm B D D B D D Electric s QC-6 TA274 - QC6 4 2" x 4" 4.30 mm x 0.60 mm T4A QC6 x 4 2" 27 mm x 4.30 mm T4A QC6 x 4 2" 27 mm x 4.30 mm P AP A B D D D P AP A B D D D B D D D D P AP A B D D D P D 7.00 ELECTRIC HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-4

38 ELECTRIC HINGES Electric s QC-6 Electric s QC-8 TA234 - QC8 TA274 - QC8 T4A QC Electric s QC-8 Swing Clear s T4A QC8 T4A3795, T4A P mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm x 4 2" 27 mm x 4.30 mm T4A D T4A D B D D B D D P AP A B D D D P AP A B D D D B D D D D x 4 2" 27 mm x 4.30 mm Electric s QC-0 TA234 - QC0 4 2" x 4" 4.30 mm x 0.60 mm TA274 - QC0 4 2" x 4" 4.30 mm x 0.60 mm AP A B D D D D P B D D B D D P AP A B D D D s Effective April 4, 206 EH-5 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

39 Electric s QC-0 TA274 - QC0 T4A QC0 x 4 2" 27 mm x 4.30 mm T4A QC0 x 4 2" 27 mm x 4.30 mm P AP A B D D D , , B, , D, D, D, D, P AP A B D D D P D Electric s QC-2 TA234 - QC2 4 2" x 4" 4.30 mm x 0.60 mm , , B, , D, D, , , B, , D, D, Electric s QC-2 TA274 - QC2 4 2" x 4" 4.30 mm x 0.60 mm T4A QC2 x 4 2" 27 mm x 4.30 mm T4A QC2 x 4 2" 27 mm x 4.30 mm P, AP, , , , A, B, , D, D3, D4, P, AP, , , , A, B, , D, D3, D4, , , B, , D, D, D, D, P, AP, , , , A, B, , D, D D P, D,04.00 ELECTRIC HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-6

40 ELECTRIC HINGES MacPro Electric s - Concealed Circuit (CC) Product MPB79-CC4 4 2" x 4" D MPB79-CC mm x 0.60 mm D MPB79-CC D MPB79-CC D MPB68-CC D MPB68-CC D MacPro Electric s - ElectroLynx Quick Connect (QC) Product MPB79-QC4 4 2" x 4" D MPB79-QC mm x 0.60 mm D MPB79-QC D MPB79-QC D MPB79-QC D MPB79-QC D MPB68-QC D MPB68-QC D MPB68-QC D ElectroLynx As part of their promise to provide innovative, fast and effective high security solutions to their customers, certain ASSA ABLOY Group brands offer ElectroLynx, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx is a registered trademark of ASSA ABLOY Inc. s Effective April 4, 206 EH-7 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

41 Transfer Device Solutions McKinney ElectroLynx Harnesses & Components For Metal Doors CORBIN RUSSWIN, SARGENT, and YALE electric hinges If metal door, order a retrofit cable with Molex connectors on both ends. If the metal door is polystyrene filled or steel stiffened, the cable may need to be routed up and over the door. PART # McKinney Catalog # 3", 6" & 2" Harness Between hinge and the end of an exit device 9398 QC-C QC-C006 Description: QC2-3" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to ) QC2-6" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to ) QC2-2" Wire Harness; 8 & 4 Pin Connector w/2 wires QC-C02 (For Exit Device Rail Jumper to ) 2', 3' & 4' Harness Between hinge and through the door to the lockset or exit device trim Net Max required (Not included) QC QC QC QC-C200 QC2-26" Wire Harness; 8 & 4 Pin Connector w/2 Wires QC QC-C206 QC2-32" Wire Harness; 8 & 4 Pin Connector w/2 Wires 5.00 QC QC-C300 QC2-38" Wire Harness; 8 & 4 Pin Connector w/2 wires QC QC-C306 QC2-44" Wire Harness; 8 & 4 Pin Connector w/2 wires QC QC-C400 QC2-50" Wire Harness; 8 & 4 Pin Connector w/2 wires QC2 5' Harness From the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door QC-C500 QC2-5' 2" Wire Harness; 8 & 4 Pin Connector w/2 Wires 3.00 QC2 QC2 - Custom sizes available. Consult factory. Harness; 8 & 4 Pin Connector Custom * POA w/2 Wires * Custom size cables less than 50" price at $ Cables over 50" price as $0.38 per inch over 50" price of $ QC2 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-8

42 electric hinges Transfer Device Solutions McKINNEY ElectroLynx Harnesses & Components For Wood Doors CORBIN RUSSWIN, SARGENT, and YALE If wood door, order a retrofit cable with the Molex connector on one end, and pins crimped on the other end. PART # McKinney CATALOG # 3", 6" & 2" Harness Between hinge and the end of an exit device Description: QC-C003P QC2-3" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to, Insert pre-pinned ends into plastic Molex connector) QC2-6" Wire Harness; 8 & 4 Pin Connector w/2 wires 9399 QC-C006P (For Exit Device Rail Jumper to, Insert pre-pinned ends into plastic Molex connector) QC2-2" Wire Harness; 8 & 4 Pin Connector w/2 wires QC-C02P (For Exit Device Rail Jumper to, Insert pre-pinned ends into plastic Molex connector) 2', 3' & 4' Harness Between hinge and through the door to the lockset or exit device trim QC-C200P QC2-26" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) Net Max required (Not included) QC QC QC QC QC-C206P QC-C300P QC-C306P QC2-32" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC2-38" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC2-44" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC QC QC QC-C400P QC2-50" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) 5' Harness From the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door QC-C500P QC2-5' 2" Wire Harness; 8 & 4 Pin Connector w/2 Wires (Termination in Field) QC QC QC-C2500P QC2-25' Wire Harness, 8 & 4 Pin Connector w/2 Wires QC QC-C3000P QC2-30' Wire Harness; 8 & 4 Pin Connector w/2 Wires QC2 Custom * Custom sizes available. Consult the factory POA QC2 * Custom size cables less than 50" price at $ Cables over 50" price as $0.38 per inch over 50" price of $ s Effective April 4, 206 EH-9 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

43 Transfer Device Solutions McKinney ElectroLynx Harnesses & Components CORBIN RUSSWIN, SARGENT, and YALE electric hinges McKinney PART # CATALOG # Miscellaneous Kits Description: QC-R00 Molex/Repair/Service Kit Miscellaneous Kits Kit Application: Includes 2, 4, 8 Molex receptacles and plugs ( 0 ea) and the corresponding terminals (00 of each type), extraction tool and pinning assembly guide. Customer must purchase Molex crimper separately. Net QC-R002 Extraction Tool Quantity, Sold one each QC-R003 Molex Hand Crimp Tool Molex tool used to attach terminals to wire (stripped) ends PART # McKinney CATALOG # Receptacles and Terminals Description: Kit Application: Net QC-RF2 Female Receptacle 2 CKT Quantity Bag of QC-RF4 Female Receptacle 4 CKT Quantity Bag of QC-RF8 Female Receptacle 8 CKT Quantity Bag of QC-RM2 Male Receptacle 2 CKT Quantity Bag of QC-RM4 Male Receptacle 4 CKT Quantity Bag of QC-RM8 Male Receptacle 8 CKT Quantity Bag of QC-FT2024 Female Terminal AWG Quantity Bag of QC-FT2630 Female Terminal AWG Quantity Bag of QC-MT2024 Male Terminal AWG Quantity Bag of QC-MT2630 Male Terminal AWG Quantity Bag of QC-DCC Pinning Assembly Guide Quantity Bag of POE-MT2024 Male Terminal AWG Quantity Bag of POE-RM6 Male Plug 6 CKT Quantity, Bag of POE-RF6 Female Plug 6 CKT Quantity, Bag of POE-MT2630 Male Terminal AWG Quantity, Bag of POE-FT2630 Female Terminal AWG Quantity, Bag of Female Receptacle (8 ckt) Locking mechanism Male Plug (8 ckt) Door Cord and EPT MCK-TSB-C Door Cord Gray/Black Caps 8" Quantity, Sold MCK-TSB-CXL Door Cord Gray/Black Caps 36" Quantity, Sold MCK-EPT Electrical Power Transfer Quantity, Sold MCK-EPTL Electrical Power Transfer, Long Quantity, Sold MCK-EL-EPT ElectroLynx EPT -2 wire Quantity, Sold MCK-EL-EPTL ElectroLynx EPTL Long -2 wire Quantity, Sold As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group brands offer ElectroLynx, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx is a registered trademark of ASSA ABLOY Inc. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-0

44 electric hinges Transfer Device Solutions McKinney ElectroLynx Power over Ethernet (PoE) & Harnesses Frame side harness assembly (5ft length) Cable drain wire concealed in shrink tubing Cable - CAT 5e, 24 AWG stranded, shielded, 00ohm, with drain wire A Cable wires to be terminated in field per lock instructions Frame Side Harness Assembly B PART # PoE Data McKinney CATALOG # U.S. Patent No. 7,824,200 PoE Door Harness Assembly C Cable - CAT 5e, 26 AWG stranded, shielded, 00ohm Description: Two 4-CKT lock mating connectors Net x 4.5 TA274 26D PoE Standard Weight 5 Knuckle, x 4.5 T4A D PoE Heavy Weight 5 Knuckle,52.00 Consult the factory for additional items with PoE option. Lock mating connectors are small enough to run through a 3/8" (min.) stile to stile door raceway. Ring terminal to be NOTES: secured inside lock The PoE door & frame harnesses can accommodate a variety of new (with raceway) and retrofit applications. Connectors are small enough to run through a 3/8" (min.) stile-to-stile door raceway. Connects to intelligent Power over Ethernet electromechanical hardware from SARGENT and CORBIN RUSSWIN. PART # McKinney CATALOG # Harness Length Application Description: Net Max Req'd (not included) Door Harnesses PoE-C206P 30" PoE-C300P 36" PoE-C306P 42" PoE-C400P 48" 9404 PoE-C406P 54" Between & PoE Lock PoE-C500P 60" Door Harness Assembly 9402 PoE-C700P 84" Door Harness Assembly PoE-C300P 56" Door Harness Assembly EPT Harness PoE-CEPT30 360" EPT Harness Assembly EPT Harness Frame Harness PoE-C500P 80" 20" to 2 door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 26" to 3" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 32" to 36" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 37" to 42" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 43" to 48" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). From the hinge location, up the jamb to the wall/ceiling. PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly Between hinge and PoE Network Cable & Switch PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE PoE PoE 9.00 PoE PoE 7.00 PoE PoE PoE PoE PoE Custom Custom sizes available. Consult factory. POA PoE The door harness connectors are small enough to run through a 3/8" (minimum) stile-to-stile door raceway. *See the McKinney Catalog for additional finishes and hinge types. Note: One hinge, door harness and frame harness are required for each PoE opening Cables over 60" add $.67 per inch to 60" price. s Effective April 4, 206 EH- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

45 Non-Ferrous Bearing TA39 x 4 2" 27 mm x 4.30 mm Non-Ferrous Bearing TA393 x 4 2" 27 mm x 4.30 mm FULL MORTISE ANCHOR HINGE SETS Anchor plate for jamb and door header only. Permits use of holders, closers concealed in top of jamb. Anchor plate for jamb header only, permits the use of holders and closers concealed in the top of the door. Hand x 4 2" 27 mm x 4.30 mm R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. TA392 Hand R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET Non-Ferrous Bearing s 4" Door Leg TA394 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. x 4 2" 27 mm x 4.30 mm Anchor plate for jamb and door header permits use of surface applied holders and closers. Anchor plate for both jamb and door header. Permits use of both holders, closers. Hand Hand R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET 4 SETS SET 28 R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. AH-

46 FULL MORTISE ANCHOR HINGE SETS Heavy Weight Beveled Edge Non-Ferrous Bearing TA5392 x 4 2" 27 mm x 4.30 mm Non-Ferrous Bearing s For Beveled Edge Doors 4" Door Leg TA5394 x 4 2" 27 mm x 4.30 mm Anchor plate for both jamb and door header permits use of surface applied holders and closers. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand Hand R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET 4 SETS SET 28 R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. TA5393 x 4 2" 27 mm x 4.30 mm Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. Steel Anchor Bearing TA79 x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in the top of the door. Anchor plate for door header only. Permits use of holders, closers concealed in top of jamb. Hand Hand R.H P SET L.H P SET R.H D SET L.H D SET R.H D SET L.H D SET 4 SETS SET 28 R.H P SET L.H. 765 P SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 AH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

47 Steel Anchor Bearing TA792 x 4 2" 27 mm x 4.30 mm Steel Anchor 4" Door Leg TA794 x 4 2" 27 mm x 4.30 mm FULL MORTISE ANCHOR HINGE SETS Anchor plate for jamb and door header permits use of surface applied holders and closers. Hand R.H P SET L.H P SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand R.H P 9.00 L.H P 9.00 R.H D L.H D SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. TA793 x 4 2" 27 mm x 4.30 mm Steel Heavy Weight Beveled Edge Bearing TA5792 x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in top of the door. Hand R.H P SET L.H P SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Sets are not available in brite finishes. Anchor plate for jamb and door header permits use of surface applied holders and closers. Hand R.H P SET L.H P SET R.H D SET L.H D SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. AH-3

48 FULL MORTISE ANCHOR HINGE SETS Steel Heavy Weight Beveled Edge Bearing TA5793 x 4 2" 27 mm x 4.30 mm Steel Bearing s For Beveled Edge Doors 4" Door Leg TA5794 x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in top of the door. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand R.H P SET L.H P SET 4 SETS SET 28 R.H D SET L.H D SET Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. Hand R.H P 9.00 L.H P 9.00 R.H D L.H D SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Sets are not available in brite finishes. s Effective April 4, 206 AH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

49 Three Knuckle Standard Weight Non-Ferrous Bearing TA " 4.30 mm 27 mm Three Knuckle Heavy Weight Non-Ferrous Bearing TA " 4.30 mm 27 mm P AP A B D D P AP A B D D P AP A B D D P AP A B D D Continued on next column Three Knuckle Heavy Weight Non-Ferrous Bearing TA384 Continued 6" 52.4 mm for 3 4" 44.4 mm door Steel Three Knuckle Standard Weight Bearing TA " 4.30 mm 27 mm P AP A B D D P AP A B D P AP A B D Steel Three Knuckle Heavy Weight Bearing TA " 4.30 mm 7542 P AP A B D Continued on next page HALF MORTISE HINGES s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HM-

50 HALF MORTISE HINGES Steel Three Knuckle Heavy Weight Bearing TA784 Continued 27 mm 6" 52.4 mm for 3 4" 44.4 mm door Steel Three Knuckle Heavy Weight Swing Clear TA mm 756 P AP A B D P AP A B D s are NRP and Reversible P AP A B D Steel Five Knuckle Standard Weight TA " 4.30 mm 27 mm P AP A B D P AP A B D Standard Weight Five Knuckle Non-Ferrous Bearing TA " 4.30 mm 27 mm 6406 P AP A B D D P AP A B D D s Effective April 4, 206 HM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

51 Heavy Weight Non-Ferrous Bearing T4A Steel Heavy Weight Bearings T4A3784 HALF MORTISE HINGES 4 2" 4.30 mm 27 mm 6" 52.4 mm for 3 4" 44.4 mm door P AP A B D D P AP A B D D P AP A B D " 4.30 mm 27 mm 6" 52.4 mm for 3 4" 44.4 mm door P AP A B D P AP A B D P AP A B D Steel Swing Clear Heavy Weight Bearing T4A mm 7302 P AP A B D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HM-3

52 HALF SURFACE HINGES Standard Weight Non-Ferrous Bearing TA TA " 4.30 mm 27 mm Refer to page HS-3 for Back Plates P AP A B D D P AP A B D D Heavy Weight Non-Ferrous Bearing 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates AP P B D D D D Steel Standard Weight D TA382 TA " 4.30 mm 27 mm Refer to page HS- 3 for Back Plates P AP A B D D P AP A B D D " 4.30 mm 27 mm Refer to page HS-3 for Back Plates P AP A B D P AP A B D s Effective April 4, 206 HS- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

53 Steel Heavy Weight Bearing TA Steel Standard Weight TA2772 HALF SURFACE HINGES 4 2" 4.30 mm 27 mm Refer to page HS-3 for Back Plates P AP A B D P AP A B D Steel Heavy Weight Swing Clear TA " 4.30 mm 27 mm Refer to page HS-3 for Back Plates P AP A B D P AP A B D mm P AP A B D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HS-2

54 HALF SURFACE HINGES HeavyWeightNon-FerrousBearing T4A Steel Heavy Weight Bearing T4A " 4.30 mm 27 mm 6" 52.4 mm Refer to page HS-3 for Back Plates. HeavyWeightSteelBearing T4A P AP A B D D P AP A B D D P AP A B D " 5805 P mm 5802 AP A B D P mm 5847 AP A B D " 5880 P mm 5879 AP for " mm door A B D Refer to page HS-3 for Back Plates. Steel Back Plates BP-0 BP- BP Product 27 mm P AP A B D " 4.30 mm 27 mm 27 mm 4 2" 4.30 mm BP-0 (TA2772) (T4A3782) BP- (T4A3797) BP-2 (572) 6324 P B D P D P D 9.00 AS ORDERED AS ORDERED AS ORDERED D 9.00 AS ORDERED s Effective April 4, 206 HS-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

55 Standard Weight 3 Knuckle Non- Ferrous Bearing TA Steel Standard Weight 3 Knuckle Bearing TA77 FULL SURFACE HINGES 4 2" 4.30 mm 27 mm P AP A B D D P AP A B D D " 4.30 mm 27 mm P AP A B D P AP A B D Heavy Weight 3 Knuckle Non-Ferrous Bearing TA38 Steel Heavy Weight 3 Knuckle Bearing TA78 4 2" 4.30 mm 27 mm P AP A B D D P AP A B D D " 4.30 mm 27 mm P AP A B D P AP A B D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FS-

56 FULL SURFACE HINGES Steel Swing Clear Heavy Weight 3 Knuckle Bearing TA797 Steel Standard Weight 5 Knuckle Bearing TA mm Heavy Weight 5 Knuckle Non-Ferrous Bearing T4A " 4.30 mm 27 mm 6" mm P AP A B D P AP A B D D P AP A B D D P AP A B D " 4.30 mm 27 mm Steel Heavy Weight Bearing T4A " 4.30 mm 27 mm 6" mm P AP A B D P AP A B D P AP A B D P AP A B D P AP A B D s Effective April 4, 206 FS-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

57 Steel Standard Weight Full Mortise Single Acting 502 C US LISTED SPRING HINGES 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 5593 P AP A B D D D P AP A B D D D Reverse Spring 502R 5607 P AP A B E 0BE D D D P D For other finishes of 502 R add $6.00 to the 502 price. 502 x TRS Option $4.00. NOTE: Consult the Factory for information on our 502 with new Security Feature. 522 No. Fin. Per Set 4 2" x 4" 5598 P SET 4.30 mm x 0.60 mm AP SET SET SET SET A SET B SET SET D SET D SET D SET SET SET SET C US LISTED Set 6 SETS SET 54 Stainless Steel Standard Weight 552 No. Fin. Per Set 5604 P SET AP SET SET SET SET A SET B SET SET D SET D SET D SET SET SET SET 4 2" x 4" 4.30 mm x 0.60 mm Set 6 SETS SET D 9.00 EA D 9.00 EA Allen Wrench set for 502 / 522 / 552 / 572 Spring s $5.00 per set s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. SH-

58 SPRING HINGES Steel Standard Weight Half Surface Single Acting 572 C US 4 2" 4.30 mm 4 2" x 4" 4.30 mm x 0.60 mm Fin. LISTED Refer to page HS-3 for BP-2 Backplate. MPS60 MPS679 MK D MacPro Spring s C US LISTED P D C US LISTED Set includes 2 Spring s and Bearing. Cross pin for MPS60 Wrench is No. Fin. Per Set Set D SETS SET ea ea. Steel Door Spring Adjustable Tension 9" mm D EA "279.4mm D EA "330.2mm D EA Steel Full Mortise Double Acting Simplex Butt 00 3" mm 4" 0.60 mm 27 mm 6" 52.4 mm 6" x 4 2" 52.4 mm x 4.30 mm P D C D P D C A D P AP D C D P D C A D P D C A D Steel Full Mortise Double Acting Simplex Butt Non-Template 900 See page SH-4 for replacement parts. 8" mm P AP D C A D s Effective April 4, 206 SH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

59 Steel Full Mortise Double Acting Simplex Clamp Flange Butt HS00 SPRING HINGES 8" mm 5933 P AP D C A D See page SH-4 for replacement parts " mm 4" 0.60 mm P AP D C A D P AP D C A D See page SH-4 for replacement parts Ajax Double Acting Horizontal Pivot 300 Ajax Double Acting Horizontal Pivot With Jamb Attaching Plate J P D C A D SET / J300 SERIES each net TOP PIVOT & SOCKET 6.00 JAMB ATTACHING PLATE* SIDE PLATE* BACK PLATE* 9.00 *Specify finish when ordering. For concrete or tile floor installation 576 P D C A D SET 33 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. SH-3

60 SPRING HINGES Ajax Double Acting Horizontal Pivot 4007RB Reversed Brackets MRB 5737 P D C A D SET 35 Mortised and Reversed Brackets H P D C A D SET P D C A D SET P D C A D SET RB/4007-MRB Series Replacement s TENSION PIN 5.00 SPRING NYLON BUSHINGS 5.00 TENSION RODS 5.00 No replacement parts are available. *Specify part number, size and finish when ordering. REPLACEMENT PARTS FOR DOUBLE ACTING SPRING HINGES AND PIVOTS McKINNEY Description Needed 3" 4" 6" 6x4 2" 8" 8" Required Per T53 - Spring T56 Tension Pin TS550 Solid Metal Cap X TS50 Loose Knob X TS520 Fast Knob TS525 Pawlnut X 4 x x x x 3.00 x x TS530 Tension Lever TS540 Plug X x x x x x s Effective April 4, 206 SH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

61 EP-5J P SET 20 SET SET 20 SET D SET 20 SET 38 RESCUE HARDWARE EP-5J Top Pivot and Socket 4.00 EP-5J Bottom Bracket and Bottom Door Socket 4.00 Screws for EP-5J 3.00 ea For Cylindrical or Bored Locks CSS-9 May not work with mortise locks. Consult the factory for mortise lock application. Not for use with deadbolt and Plunger Assembly for DS-6 or CSS only 9.00 Springs only.00 Emergency Door Stop DS " 46 mm Center Hung Center Hung D Offset Hung Offset Hung D " mm Center Hung Center Hung D Offset Hung Offset Hung D " 7.40 mm Center Hung D Offset Hung Offset Hung D Custom s AS ORDERED AS ORDERED AS ORDERED D Consult the factory for availability of custom sizes Custom Engineering and Set Up charges may apply Double Lipped Strike DLS " 46 mm Center Hung Center Hung D AS ORDERED May not work with mortise locks. Consult the factory for mortise lock application. Not for use with deadbolt Consult the factory for availability of custom sizes Custom Engineering and Set Up charges may apply 5 3 4" 46 mm Offset Hung Offset Hung D AS ORDERED 6 3 4" 7.40 mm Center Hung Center Hung D AS ORDERED 6 3 4" 7.40 mm Offset Hung Offset Hung D AS ORDERED Custom s s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. RH-

62 SPECIALTY HINGES Raised Barrel Pocket PH-4 For Narrow Stile RBTA RBT4A P B D D D AS ORDERED StormPro Tornado Resistant s SP3386 x 4 2" 27 mm x 4.30 mm SP3786 x 4 2" 27 mm x 4.30 mm D D P D P D All StormPro products should be ordered as a complete integrated unit including the frame and door along with other StormPro hardware. Storm- Pro hinges are a required component of the certified StormPro system Interim s Door or Frame Leaf Opposite Leaf Trimmed To: 4½" TA274 26D T4A D T4A D For finishes not listed, use $2.00 over 26D price All interim hinges are supplied with NRP set screw and nohole plugs which allow them to be reversible. Leaves are trimmed the same dimension from the top and bottom of that leaf - otherwise a complete special must be manufactured, check for existence of available special part numbers which may have previously been manufactured Specialty s & Residential 400 Staggered Hole Pattern on 4" x 4" 44 /4" Radius Staggered Hole Pattern on 4" x 4" 458 5/8" Radius Staggered Hole Pattern on 4" x 4" Residential s available only in finishes shown above. Contract Grade Discount does not apply to Residential Grade s. NOTE: Unlisted finishes for residential hinges P.O.A. Consult the Factory on minimum requirements. 3 2" x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" mm x mm 4" x 4" 0.60 mm x 0.60 mm B* D B* D B* D B* D B* D B* D 0.00 *Residential grade 0B s Effective April 4, 206 SP- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

63 2-Knuckle Architectural s *GT and LT tips not available in D4 and 0BE finishes. For options not offered in price book, contact factory. 2-Knuckle s are handed RH or LH DESIGNER HARDWARE FT RT GT* LT* LH RH Tip Prefix FT GT LT RT Type T273 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D LH RH Tip Prefix FT GT LT RT Type TA " x 4" 4.30 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D LH RH Tip Prefix FT GT LT RT Type T " x 4" 4.30 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D LH RH Tip Prefix FT GT LT RT Type TA273 Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D LH RH Tip Prefix FT GT LT RT Type T Deco Tip Kit Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D LH RH Tip Prefix FT GT LT RT Type TA273 x 27 mm x 27 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D4.00 US5 x D US26 x D4.00 US26D x D US4 x US4.00 US4 x US5.00 US5 x US US5 x US US26 x US26D.00 US26D x US US26 x US26.00 US26D x US26D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-

64 DESIGNER HARDWARE Knuckle Architectural s *GT and LT tips not available in D4 and 0BE finishes.for options not offered in price book, contact factory. FT RT GT* LT* Tips Book Tips Book Tip Prefix FT GT LT RT 7806 Type T74 4" x 4" 0.60 mm x 0.60 mm D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Tip Prefix FT GT LT RT 7809 Type T74 x 27 mm x 27 mm D4 x US D4 x US D4 x US D4 x US26D 7.00 D4 x D BE x 0BE 7.00 US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Tip Prefix FT GT LT RT 7807 Type T74 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Tip Prefix FT GT LT RT Type TA74 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D 7.00 US26D x US US26 x US US26D x US26D Tip Prefix FT GT LT RT 7808 Type T74 Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Tip Prefix FT GT LT RT 7802 Type TA74 4 2" x 4" 4.30 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D s Effective April 4, 206 DH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

65 3-Knuckle Architectural s Tip Prefix FT GT LT RT Type TA74 Tip Prefix FT GT LT RT Type TA74 x 27 mm x 27 mm Tips Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Knuckle Architectural s 5-Knuckle Architectural s only available with Standard Pin and Plug. For options not offered in price book, contact factory *GT and LT tips not available in D4 and 0BE finishes. For options not offered in price book, contact factory. Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D Type 0BE x 0BE US3 x US US4 x D TA786 US5 x D US26 x D US26D x D US4 x US US5 x US US4 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D 0.00 Tips Book Order by Description Tip Prefix FT Order by Description Tip Prefix FT Type TA786 x 27 mm x 27 mm D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US5 x US US4 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D DESIGNER HARDWARE Type T274 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Type T " x 4" 4.30 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D 3.00 D4 x D BE x 0BE 3.00 US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D 3.00 Continued on next page s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-3

66 DESIGNER HARDWARE Knuckle Architectural s (Continued) 5-Knuckle Architectural s only available with Standard Pin and Plug. For options not offered in price book, contact factory Type T274 Tips Book D4 x US D4 x US D4 x US D4 x US26D 3.00 D4 x D BE x 0BE 3.00 US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Type T274 x 27 mm x 27 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Type TA274 4" x 4" 0.60 mm x 0.60 mm Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Type TA274 Tips Book D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Tips Book Tips Book Type TA " x 4" 4.30 mm x 0.60 mm D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D US26D x US US26 x US US26D x US26D Type TA274 x 27 mm x 27 mm D4 x US D4 x US D4 x US D4 x US26D D4 x D BE x 0BE US4 x D US5 x D US26 x D US26D x D US4 x US US4 x US US5 x US US5 x US US26 x US26D 7.00 US26D x US US26 x US US26D x US26D s Effective April 4, 206 DH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

67 Square Barrel s s are handed, offered in standard weight only, and cannot be electrified. For options not offered in price book, contact factory. Product LH RH Type SQ333 Book B BE D DESIGNER HARDWARE Olive Knuckle s s are handed, offered in standard weight only, and cannot be electrified. For options not offered in price book, contact factory. Product LH RH Type Book NL NL TA3383 6" mm x mm NL B BE D s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-5

68 ALUMINUM CONTINUOUS GEARED HINGES Listing: R2248 C US McKINNEY aluminum continuous hinges have been tested and certified by Underwriters Laboratories, Inc. (U.S.A. and Canada) for up to a 3-hour (A Label) Fire Listing for all 4'0" x 0'0" and 8'0"x 0'0" door LISTED and frame assemblies. Fire listing certification applies to all approved hollow metal and wood door assemblies in dry wall or masonry wall construction. No special preparations are required for up to 90 minutes. Fire Pins, which also increase the security of the door are required for 3-hour applications. Fire Pin applications fall within the UL guidelines for retrofitting assemblies in the field. Cutting the hinge in the field will not void the UL listing. Drilling locations for Fire Pins are found on each template. The most up to date templates are found on our web site at All models are approved for UL retrofit applications per NFPA 80. These hinges conform to ANSI / BHMA Standard A : Grade 2-50 (50 # cycles) Grade (300 # 500,000 cycles) Grade -300 (300 # cycles ) Grade -600 (600 # 500,000 cycles) Available Options: (Consult individual pages for availability of option with profile listed) Current Carrying s: QC4 cable will carry 6 amps continuous at 24 volts in-rush for 820 milliseconds. When ordering, please specify where the modification is to be located from the top of the hinge down to the centerline of prep. Handing is required on all hinges provided with electrical modifications. Molex connectors with ElectroLynx are is warranted for 5 years. Molex connectors are included at each leaf for ease of electrical connection. electrical prep is supplied with a 80" cable lead. QC hinges are available with additional options, SER (Serviceable) and ACC (Accessible). MM Magnetic Monitoring Transfer also available with SER and ACC Options. QC ElectroLynx Connectors also available with SER (Serviceable) and ACC (Accessible) Options. EPT Power Transfer Prep (Cut Out Only) for Von Duprin. See page CH-0 for location template. This template must be filled out and included with your order. PT Power Transfer Prep (Cut Out Only) for Securitron, Yale, Centurion, Dorma or Adams Rite. Refer to page CH-0 for location template. This template must be filled out and included with your order. Custom Cut to Length (s may be field cut and not void listing. Field-Cut hinges should be cut from bottom) Fire Pins Kit While hinges are rated without fire pins up to 90 minutes, 3-hour ratings require the use of fire pins. Fire pin kit consists of 4 each for inch hinges and 5 each for 96 to 20 inch hinges, as well as the installation instructions on what size holes to drill after the hinges have been installed. Hospital Type Tips are available on full mortise hinges Specify K pre-fix for Kawneer Tuffline Series Aluminum Doors on our MCK-2HD Series, order as K-MCK- 2HD and include size and finish Painted Colors Gear Cap Only - Batch charge and additional charge per hinge Complete - Batch charge and additional charge per hinge (minimum run 20 hinges) POA Lengths McKINNEY aluminum continuous geared hinges are listed and priced here in 79", 83", 8, 9 and 20" actual lengths for ease of installation on standard nominal door openings. The actual length of the hinge provides for head and threshold clearance. Custom lengths may be ordered as a special run. Consult the factory regarding minimum requirements and noncancellation policy on custom lengths. s may be cut to appropriate length in the field. The hinge should be installed with the cut side on the bottom. Cutting in the field does not void the listing. We recommend that after removing cap, a saw blade be used to score and always begin cut at gear head. Never at leaves. Cut only from bottom of hinge. Do not cut through bearings or screw holes. s Effective April 4, 206 CG- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

69 2HD - 4HD - 25HD Option SN - Satin Nickel over CL G - Gold Anodized Same as BZ BL - Black Anodized 20% over BZ QC-4* QC-8* QC-2* ACC-4* ACC-8* ACC-2* SER-4* SER-8* SER-2* MM* EPT Prep for Von Duprin PT HT* Custom Cut to Length* 3.00 FIREPIN-C4 (For 80"-9 hinge) FIREPIN-C5 (For 96"-20" hinge) Dutch Door Prep* Painted Colors P.O.A. For QC-2 order one of each of the above Fastener Kits (one kit required up to 9 2 kits for 20") FMK-CL (7502) FMK-BZ (7503) Torx Screws 3.00 PBS250SP0R2 wood screw pack (2 ea per bag).00 Replacement SER Sections 2HD Option 9404 SER-4 CL Section SER-4 BZ Section SER-8 CL Section SER-8 BZ Section SER-2 CL Section SER-2 BZ Section HD - 54HD - 58HD Option SN - Satin Nickel over CL G - Gold Anodized Same as BZ BL - Black Anodized 20% over BZ QC-4* QC-8* QC-2* HT* Custom Cut to Length* 3.00 FIREPIN-C4 (For 80"-9 hinge) FIREPIN-C5 (For 96"-20" hinge) Painted Colors P.O.A. For QC-2 order one of each of the above C Repl Cover 22HD CL D Repl Cover 22HD BZ C Repl Cover 54HD CL D Repl Cover 54HD BZ C293C Repl Cover 58HD D293D Repl Cover 58HD Specify length 22HD & 54HD Fastener Kits (one kit required up to 9 2 kits for 20") Option FSHSK-CL (77350) FSHSK-BZ (7735) HD Option 58K-CL (77348) K-BZ (77349) ALUMINUM CONTINUOUS GEARED HINGES When ordering advise location for electrical options from top of hinge to center-line of electrical prep location. Handing is required for hinges with electrical prep. * Handing Required Refer to pages CH-0 for the appropriate power transfer locator template. This template must be filled out and included with your order. Gold or other custom finishes may have 6-8 week lead time. s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CG-2

70 ALUMINUM CONTINUOUS GEARED HINGES Product FullMortiseEdgeHungFlushDoor MCK-2HD Heavy Duty Crtn Crtn 79" 7676 CLEAR " 7674 BRONZE " 7677 CLEAR " BRONZE CLEAR BRONZE CLEAR BRONZE " CLEAR " BRONZE K-MCK-2HD For Kawneer Tuffline Series Aluminum Doors, pre-fix the MCK-2HD series with K, example 83" K-MCK-2HD CL Full Mortise Edge Hung Inset Door MCK-22HD Heavy Duty Product Crtn Crtn 79" 7677 CLEAR " BRONZE " CLEAR " BRONZE CLEAR BRONZE CLEAR BRONZE " CLEAR " BRONZE Complete installation hardware kit which includes 2-24 x 7 6" Phillips, Flat Head Undercut, Zinc screws for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unless otherwise specified. Product Product Product MCK-4HD Heavy Duty MCK-WTHD Heavy Duty 83" CLEAR " CLEAR " BRONZE CLEAR BRONZE " 7675 CLEAR " BRONZE " CLEAR " BRONZE CLEAR BRONZE CLEAR BRONZE " CLEAR " BRONZE Crtn Crtn Crtn Crtn Crtn 8 Crtn 8 MCK-25HD Heavy Duty Product Product MCK-28HD Heavy Duty Available Options: To order, specify length and finish. s are supplied with # 2-24 x 7 6" Flat Head Undercut, Type C, thread-forming screws. Option (Suffix) Crtn Crtn Crtn Crtn Net Add Custom Cut to Length* 3.00 Fire Pin Kit: FIREPIN-C4 (For 80"-9 hinge) FIREPIN-C5 (For 96"-20" hinge) Painted Colors: Gear Cap Only Complete * Requires Handing 79" CLEAR " 7673 BRONZE " CLEAR " BRONZE CLEAR BRONZE CLEAR BRONZE " 7670 CLEAR " BRONZE " CLEAR " BRONZE CLEAR BRONZE CLEAR BRONZE " CLEAR " BRONZE Fire Pins are required on 3 hour rated doors only. Full Mortise Safety s MCK-35HD...Same Pricing as MCK-2HD MCK-38HD...Same Pricing as MCK-2HD P.O.A P.O.A. s Effective April 4, 206 CG-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

71 Continuous s Full Surface MCK-54HD Heavy Duty Crtn Crtn 79" 7676 CLEAR " BRONZE " CLEAR " BRONZE CLEAR BRONZE CLEAR BRONZE " CLEAR " BRONZE MCK-58HD Heavy Duty Crtn Crtn 79" 768 CLEAR " 7682 BRONZE " 7683 CLEAR " 7684 BRONZE CLEAR BRONZE CLEAR BRONZE " 7689 CLEAR " BRONZE ALUMINUM CONTINUOUS GEARED HINGES Complete installation hardware kit which includes 2-24 x 7 6" selftapping, Phillips, Flat Head Undercut, Zinc screws for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unless otherwise specified. Complete installation hardware kit which includes 2-24 x 7 6" x #0 head, Thread-Forming, Flat Head Undercut screw for the frame leaf. Door leaf fasteners are 4"-20 shoulder bolts and thru bolts for 3 4" door. Available Options: Option (Suffix) Refer to Page CG-3 s Effective April 4, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CG-4

72 Door Security Solutions Canada 60 Four Valley Drive Vaughan, ON L4K 4T Copyright , McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited /206