2016 PRICE LIST. Adams Rite. Architectural Hardware. Prices effective February 1, adamsrite.com

Transcription

1 2016 PRICE LIST Adams Rite Architectural Hardware Prices effective February 1, 2016 adamsrite.com

2

3 LIMITED WARRANTY 3 Limited Warranty Products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-adams Rite products or parts. This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification. Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below. All mechanical products for five (5) years from date of manufacture Ultraline 7400 Electric Strikes for five (5) years from date of manufacture All electrical products for three (3) years from date of manufacture, with the exception of the exit devices with the SE option Exit devices with the SE option for one (1) year from date of manufacture. Adams Rite recommends that for optimal performance all exit devices with the SE option are installed and powered using PS-SE power supplies. Installing SE exit devices with PS-SE power supplies extends the warranty to five (5) years from date of manufacture. General RMA Procedure Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, Adams Rite will determine whether products qualify for repair or replacement under this warranty. Adams Rite has no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done. Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, S. 51st Street, Suite 102, or CustomerCare@AssaAbloyEMS.com and should include your name and address, an identification of the product or component part and a brief description of the defect. Notice of a product or component part believed to be defective as covered by this warranty may also be accepted over the telephone by Adams Rite, Upon receipt of such notice, if the customer has an account with Adams Rite or a valid credit card, an advance replacement product may be ordered whereby Adams Rite will ship a replacement product to the customer free of charge. If Adams Rite does not receive the original defective product from the customer within 60 days, Adams Rite will charge the customer s account or credit card for the price of the advanced replacement product plus freight costs. Upon inspection of the returned product by Adams Rite, a decision will be made whether or not to charge the customer for the advanced replacement Adams Rite product. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Obsolete products will not be accepted for return. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance. If Adams Rite receives original defective product from the customer within 60 days of RMA issuance, and if the customer is requesting credit for the defective material, the customer must reference the valid Adams Rite Purchase Order number upon which the product was originally ordered. If the original Purchase Order number is not available, at Adams Rite s option a credit may be issued at the customer s current cost. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Transportation charges and insurance on all returned materials must be prepaid by the purchaser when merchandise is ordered in error. On goods returned for customer convenience, when the purchaser returns materials in compliance with these Terms which are accepted by Adams Rite, the purchaser may be issued a credit for 65% of the purchase price, with 35% charged by Adams Rite for handling and reprocessing. All refunds will be in the form of a credit. Scrap in field may be allowed on select products for customers who have prior agreement with Adams Rite. In this case the original defective product will not have to be returned to Adams Rite. Items allowed under this program are subject to the discretion of Adams Rite and may change at any time. Only authorized product is allowed to be scrapped in the field. Unauthorized product scrapped in the field will be considered not returned and the customer will be charged for the replacement or credit will be denied. Cancellation As an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. Adams Rite s proud history of customer service and manufacturing agility allow quick response times to customer s changing needs, which may include special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite. Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

4 4 TABLE OF CONTENTS General Information Adams Rite Limited Warranty/Terms and Conditions 3 Table of Contents 4-5 Products DEADLOCKS RT1050D RITE Touch Digital Glass Door Lock Bottom Rail Deadlock(Swingbolt) 6 MS1837 Series MS Two-Point Deadlock 6 MS1847 Series MS Deadlock 7 MS1850S Series MS Deadlock 7 MS1850SN Series MS Deadlock (ANSI Size) 8 MS1861 Series MS Bottom Rail Deadlock Two-Point Deadlock 8 MS+1890 Series MS Deadlock/Deadlacth 9 MS1950 Series MS Deadlock Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors Dual Force Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors Heavy Duty Deadbolt Series Short Throw Deadbolt (Projection Style) , 4190 Flush Locksets (Including Deadlock) , 4431 Flush Locksets (Including Deadlock) Wood Door Deadbolt Wood Door Deadlock for Sliding Doors 13 DEADLATCHES 4300 Electrified Deadlatch (elatch) Steel Hawk RITE Pack Standard Duty Deadlatch Standard Duty Deadlatch Two-Point Deadlatch with Paddle Heavy Duty Deadlatch AN Heavy Duty Deadlatch (ANSI Size) 16 EXIT DEVICES 8099 Dummy Pushbar , 8100 Surface Vertical Rod Exit Device Narrow Stile Surface Vertical Rod Exit Device , 8300 Mortise Exit Device Narrow Stile Mortise Exit Device , 8500 Metal Door Concealed Vertical Rod Exit Device Narrow Stile Concealed Vertical Rod Exit Device , 8700 Rim Exit Device Narrow Stile Rim Exit Device , 8900 Wood Door Concealed Vertical Rod Exit Device 24 ACCESSORIES FOR EXIT DEVICES 24 KITTED OPTIONS FOR EXIT DEVICES 25 MODIFICATION OPTIONS FOR EXIT DEVICES 25 ELECTRIC STRIKES 7100, 7101 Electric Strikes , 7111 Electric Strikes , 7131 Electric Strikes Electric Strike Electric Strike Electric Strike Series Electric Strikes Components Fire-Rated Electric Strike Fire-Rated Electric Strike 29 Ultraline 7400, 7401 Electric Strikes 30 Ultraline 7410, 7411 Electric Strikes 30 Ultraline 7430, 7431 Electric Strikes 31 Ultraline 7440 Electric Strikes 31 Ultraline 74R1 Electric Strikes 31 Ultraline 74R2 Electric Strikes Series Electric Strikes Components 32 FLUSHBOLTS & PIVOTS 1870 Cylinder-Operated Flushbolt HM Cylinder-Operated Flushbolt Cylinder-Operated Flushbolt 17 MS1880, MS1881 Two-Point Flushbolts 18 MS2180 Auto-Release Two-Point Flushbolt 18 B1921, B1923 Reinforcing Pivots 18

5 TABLE OF CONTENTS 5 TRIM 1000 Series Turns Fixed Pull Series Entry Trim , 3090P/C eforce Keyless Entry 35 A H Keyless Entry and Aperio Hub Wholesale Kit Turn MS Deadlock Lever , 4565 Series Deadlatch Handles for 4300, 4500, , Series Deadlatch Handles for MS , 4569 Eurostyle Deadlatch Handles , Series Deadlatch Handles for MS Deadlatch Paddle for 4300, 4500, X Deadlatch Paddle for MS+1890, Deadlatch Paddle for 4300, 4500, X Deadlatch Paddle for MS+1890, Heavy Duty Designer Deadlatch Handle 41 CYLINDERS 4024, 4025, 4029 Cylinder Pulls Mortise Cylinder 42 MS4043 Cylinder Guard Thumbturn Cam Disc Universal Cam Disc Cylinder Escutcheon Kit Rim Cylinder 44 ACCESSORIES 4014 Two-Point Conversion Kit Threshold Bolt Header Bolt Header Bolt (Pairs of Doors Only) Exit Indicator Mounting Bridges Universal Mounting Tab Kits for Installing MS Locks & Latches Dual Force Interconnected Deadbolt/Deadlatch Strikes Dual Force Interconnected Deadbolt/Deadlatch Strikes Series MS Deadlock Strikes , MS 4804 Series Strikes , 4902 Deadlatch Strikes Deadlatch Strike 48 THICK DOOR KITS 2190, 2290 Dual Force Interconnected Deadbolt/Deadlatch Thick Door Kit , 4569 Eurostyle Deadlatch Handles Thick Door Kits 49 FACEPLATES MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates 49 MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates 49 MS1850S Deadlocks Faceplates 49 MS1850SN Deadlocks (Long Throw) Faceplates 49 MS1850SN Deadlocks (Hookbolt) Faceplates Flushbolt Faceplates 50 MS+1890 Deadlock Faceplates Heavy Duty Deadbolt Faceplates Fire-Rated Mortise Exit Device Faceplates Short Throw Deadbolt Faceplates Standard Duty Deadlatch Faceplates Standard Duty Deadlatch Faceplates Heavy Duty Deadlatch Faceplates Heavy Duty Deadlatch Special Faceplates , 8300 Faceplates , 7160 Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates , 7170 Electric Strikes Faceplates 52 POWER PS-SE Power Supply 53 PS-1 Power Supply 53 PS-LR Power Supply , 4605, 4606 Transformer/Rectifier/Plezo Horn Power Transfer Device 54

6 6 DEADLOCKS DEADLOCKS RT1050D RITE Touch Digital Glass Door Lock MODELS RT1050D Digital glass door lock for single or double doors $ RT-5C-1050 Extra cards (package of 5 cards) $60.00 HOW TO ORDER Specify quantity and the following information. RITE TOUCH RT MODEL 1050D 1050D For single or double doors 1830 Bottom Rail Deadlock (Swingbolt) MODEL & FINISHES 313, 628 sw /32", or 1-1/8" cylinder height $ PRODUCT NO. DASH NO. (SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH) FINISH Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized 03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized MS1837 Series MS Two-Point Deadlock MODELS & FINISHES 313, 335, , 626 MS1837 Includes strike, 36" cylinder height $ $ MS1837 Cylinder height other than 36" (maximum cylinder height 65 ) $ $ PRODUCT NO. FINISH MS Dark Bronze Anodized 626 Satin Chrome 335 Black Anodized 628 Clear Anodized 605 Bright Brass If cylinder height other than 36 is required, specify exact height from bottom of door to cylinder center. Maximum cylinder height 65.

7 DEADLOCKS 7 MS1847 Series MS Deadlock/Deadlatch MODEL & FINISH 630 MS1847 Deadlock, stainless steel $57.00 PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK OR LATCH FINISH MS (See Configuration table below) 630 Satin Stainless VERT. (Blank) SELF- LATCHING SELF- LATCHING VERT MS1850S, MS1850S-050 Series MS Deadlock MODELS & BACKSETS 7/8" 31/32", 1-1/8", OR 1-1/2" MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike $79.00 $67.00 MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike $79.00 $67.00 MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike $84.00 $72.00 MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $79.00 $67.00 Schoolhouse function for above locks add $36. PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH MS185 0S S Flat 1 7/8" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized 1S Radius 2 31/32" 5 Hookbolt 6 RH or LHR 335 Black Anodized 1SW Radius with weatherstrip 3 1-1/8" 0 Non-Handed* 628 Clear Anodized 2S Bevel 4 1-1/2" *Any flat or radius faceplate, except Schoolhouse.

8 8 DEADLOCKS MS1850SN, MS1850SN-050 Series MS Deadlock (ANSI Size) MODELS MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike $95.00 MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike $95.00 MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $95.00 PRODUCT NO. FACEPLATE ANSI SIZE BOLT SHAPE HANDING FINISH MS185 0 SN Flat 41 Straight 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 45 Hookbolt 6 RH or LHR 335 Black Anodized 2 Bevel 0 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate, except schoolhouse. MS1861 Series MS Bottom Rail Deadlock MODELS & FINISH 603 MS One-point deadlock, vertical bolt operation only $ sw ms 1861 MS Two-point deadlock, horizontal and vertical operation $ PRODUCT NO. BOLT OPERATION FINISH PACKAGING MS IB 01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed 02 Vertical and Horizontal Bolts If tube spacers are required, specify QUANTITY and LENGTH Two Point Deadlock MODEL & FINISH Two-point deadlock $ PRODUCT NO. PACKAGING IB IB Individually Boxed

9 DEADLOCKS 9 MS+1890 Series MS Deadlock/Deadlatch MODELS & FINISHES 628, 313, 335 MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MODEL MS+1893-IB Without faceplate, without strike $ PRODUCT NO. FACEPLATE BACKSET STRIKE SHAPE/LIP LENGTH HANDING FINISH MS Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized 1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 2 Bevel 21 Flat/Center Hung 4-1/2" Jamb For door thickness other than 1-3/4, contact factory. MS1950, MS Series MS Deadlock MODELS MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ Schoolhouse function for above locks add $36. PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH MS Flat 2 31/32" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 5 Hookbolt 6 RH or LHR 335 Black Anodized 1W Radius with weatherstrip 4 1-1/2" 0 Non-Handed* 628 Clear Anodized 2 Bevel *Any flat or radius faceplate except schoolhouse.

10 10 DEADLOCKS 2190 Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors MODELS & TRIM SETS 2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) 2190 Deadbolt/Deadlatch with flat/ centerhung 4 or 4.5 strike, standard series handle designation (01, 02, 03) 2190 Deadbolt/Deadlatch with flat or radius strike, designer lever series designation (MD through MW) STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ MODELS & FINISHES 628, 313, 335 N/A 2190 BOXED LOCK Less lever trim, with adjustable faceplate and choice of standard or radius strike $ EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $ PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH D 3 1-1/8" 0 None 1 Clear Anodized None 00 No Handle 03 Bright Brass (US3) 4 1-1/2" 1 2 Dark Bronze Standard Flat Anodized With Trim Set STANDARD SERIES: 04 Satin Brass (US4) 2 Radius Strike 3 2 With Electrified Black Anodized 335 Trim Set 01 Curve 10B Dark Bronze (US10B) 3 Flat/Center Hung 4" 3 Low Profile Trim 02 Round 32 Bright Stainless (US32) 4 Flat/Center Hung 4-1/2" 03 Square 32D Satin Stainless (US32D) DESIGNER SERIES: MD MJ ME MN (Handed) MG MV (Handed) MI MW Trim options 1 and 2 are for outswing doors only.

11 DEADLOCKS Dual Force Interconnected Deadbolt/Deadlatch for Wood or Hollow Metal Stile and Rail Doors MODELS & TRIM SETS 2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) 2290 Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW) STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 10B, US32, US32D US3, US4 $ $ $ $ $ $ $ $ $ $ $ $ MODELS & FINISHES 313, 335, 628 N/A 2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike $ EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $ PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH D 3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3) 4 1-1/2" 1 Standard Flat 1 Clear Anodized With Trim Set STANDARD SERIES: 04 Satin Brass (US4) 2 Dark Bronze Anodized With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B) 3 Black Anodized Low Profile Trim 02 Round 32 Bright Stainless (US32) 03 Square 32D Satin Stainless (US32D) DESIGNER SERIES: MD MJ ME MN (Handed) MG MV (Handed) MI MW Trim options 1 and 2 are for outswing doors only Heavy Duty Deadbolt MODEL & FINISHES 121, , Deadlock and strike $ $ PRODUCT NO. FINISH To Match Dark Bronze Anodized Bright Brass 625 Bright Chrome 626 Satin Chrome

12 12 DEADLOCKS 4070 Series Short Throw Deadbolt (Projection Style) MODELS & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", or 1-1/8" backset $ Radius faceplate, 7/8", 31/32", or 1-1/8" backset $ Bevel faceplate, 7/8", 31/32", or 1-1/8" backset $ MODEL 4073 Without faceplate $ PRODUCT NO. FACEPLATE BACKSET HANDING FINISH Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized 1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized 2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate. 4189, 4190 Flush Locksets (Including Deadlock) MODELS & FINISHES STANDARD LOCK FACE STAINLESS STEEL LOCK FACE 4189-IB Flush lockset, individually boxed $93.00 $ IB Flush lockset, individually boxed with cylinder $ $ IB Dummy flushset, individually boxed $62.00 $69.00 PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS FINISH KEYING OPTIONS PACKAGING IB 89 Without Cylinder 00 Without Lock 1 1" to 1-3/8" 90 With Cylinder 09 Radius 2 1-7/16" to 1-5/8" 95 Dummy 09S Radius Stainless Steel 10 Square 10S Square Stainless Steel /16" to 2" 130 To match Clear Anodized To match Dark Bronze Anodized To match Black Anodized Without Cylinder IB Individually Boxed 01 Keyed Different 02 Keyed Alike in Pairs

13 DEADLOCKS , 4431 Flush Locksets (Including Deadlock) MODELS & FINISH STANDARD LOCK FACE STAINLESS STEEL LOCK FACE 4430-IB ABS flush lockset, individually boxed $64.00 $ IB ABS flush lockset with cylinder, individually boxed $98.00 $ IB ABS dummy flushset, individually boxed $28.00 $35.00 Kitted Options MODELS & FINISHES GRAY Grip pull for use with 4189, 4190 $ Grip pull for use with 4430, 4431 $31.00 PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS KEYING OPTIONS PACKAGING IB 30 Without Cylinder 00 Without Lock 00 1" to 1-5/16" 00 Without Cylinder IB Individually Boxed 31 With Cylinder 09 Radius /8" to 1-5/8" 01 Keyed Different 32 Dummy 09S Radius Stainless Steel /4" to 2" 02 Keyed Alike in Pairs 10 Square 10S Square Stainless Steel 5017 Wood Door Deadlock/Deadlatch MODELS & FINISH Stainless steel deadlock $ Self-latching deadlock $57.00 PRODUCT NO. LATCH CONFIGURATION Standard 02 Self Latching 5500 Wood Door Deadlock for Sliding Doors MODELS Lockset, strike and trim included for 1-1/4 thick sliding wood doors $ PRODUCT NO. DOOR THICKNESS FINISH /4" Thick 626 Satin Chrome

14 14 DEADLATCHES DEADLATCHES 4300 Steel Hawk Electrified Deadlatch (elatch) MODELS & FINISHES 313, 335, /32", 1-1/8", or 1-1/2" backset $ M Monitored option, 31/32, 1-1/8, or 1-1/2 backset. $ PRODUCT NO. BACKSET MONITORING STRIKE STIRKE SHAPE/LIP LENGTH FACEPLATE FINISH M /32" 0 None 1 Surface Mount (4304) 01 Flat/Standard Jamb 313 Dark Bronze Anodized 3 1-1/8" M Monitored 2 Mortised (4901) 4-5/8" 02 Radius/Standard Stiles** 335 Black Anodized 4 1-1/2" 17 Flat/Center Hung 4" Jamb** 628 Clear Anodized 21 Flat/Center Hung 4-1/2" Jamb** ** See ACCESSORIES for available 4901 strike options RITE Pack MODELS /32" backset, surface mount or mortise strike, 313 and 628 faceplates $ /8" backset, surface mount or mortise strike, 313 and 628 faceplates $ PRODUCT NO. BACKSET MONITORING STRIKE RITE PACK RP 2 31/32" 0 None 1 Surface Mount (4304) 3 1-1/8" 2 Mortised (4901) 4-5/8"

15 DEADLATCHES Standard Duty Deadlatch MODELS & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $ Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $ W Radius faceplate with weatherstrip, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $ Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $79.00 MODEL 4513-IB Without faceplate, without strike $58.00 PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" Dark Bronze Flat/Standard Jamb Anodized 1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized 1W Radius with weatherstrip 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 2 Bevel 4 1-1/2" 21 Flat/Center Hung 4-1/2" Jamb 4530 Standard Duty Deadlatch MODELS & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $ Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $ Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $97.00 PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized 1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized 2 Bevel 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 21 Flat/Center Hung 4-1/2" Jamb

16 16 DEADLATCHES 4781 Two-Point Deadlatch with Paddle MODEL & FINISHES 313, 335, 628 US26, US26D 4781 Paddle includes dogging feature $ $ PRODUCT NO. OPERATION PADDLE FINISH 4781 T T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome 628 Clear Anodized US26D Satin Chrome 4900 Heavy Duty Deadlatch MODELS & FINISHES 313, 335, Any handing, 31/32", 1-1/8", or 1-1/2" backset $ W Radius with weatherseal faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $ MODEL 4913-IB Without faceplate or strike $83.00 PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH Standard 2 31/32" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized 11W Radius with Weatherseal 3 1-1/8" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile 335 Black Anodized 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized 21 Flat/Center Hung 4-1/2" Jamb 4920AN Heavy Duty Deadlatch (ANSI Size) MODELS & FINISHES 313, 335, AN Flat faceplate, 1-1/2 or 2-3/4 backset with 4506 strike $ AN Flat faceplate, 1-1/2 or 2-3/4 backset without strike $ MODEL 4923AN-IB Without faceplate or strike $97.00 PRODUCT NO. BACKSET HANDING STRIKE FACEPLATE FINISH 4920AN /2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized 5 2-3/4" 6 RH or LHR Strike 335 Black Anodized 628 Clear Anodized

17 FLUSHBOLTS & PIVOTS 17 FLUSHBOLTS & PIVOTS 1870 Cylinder-Operated Flushbolt MODELS & CYLINDER HEIGHT STANDARD CYLINDER HEIGHT CYLINDER HEIGHT OVER 12" (SPECIFY) 1870 Flat faceplate, 313, 335, or 628 finish $ $ Radius faceplate, 313, 335, or 628 finish $ $ W Radius faceplate with weatherstrip, 313, 335, or 628 finish $ $ Bevel faceplate, 313, 335, or 628 finish $ $ For cylinders over 12 specify cylinder height, 65 maximum. Contact factory for cylinder heights taller than 65. PRODUCT NO. FACEPLATE SHAPE BACKSET HANDING FINISH Flat 2 31/32" 0 Non-Handed* 313 Dark Bronze Anodized 1 Radius 3 1-1/8" 5 LH or RHR 335 Black Anodized 1W Radius with weatherstrip 6 RH or LHR 628 Clear Anodized 2 Bevel *Any flat or radius faceplate. 1870HM Cylinder-Operated Flushbolt MODEL & FINISHES 313, 335, HM For hollow metal, 1-1/4" backset $ Cylinder height, 65" maximum. Contact factory for cylinder heights taller than 65. PRODUCT NO. FACEPLATE SHAPE HANDING FINISH 187 0HM HM Flat 0 Non-Handed* 313 Dark Bronze Anodized 2HM Bevel 5 LH or RHR 335 Black Anodized 6 RH or LHR 628 Clear Anodized *Any flat or radius faceplate Cylinder-Operated Flushbolt MODELS & FINISHES 628, , /4" backset, 13-1/2" cylinder height $ $ /4" backset, cylinder height other than 13-1/2" (maximum cylinder height 57.5") $ $ Maximum cylinder height PRODUCT NO. FINISH Dark Bronze Anodized 626 Satin Chrome 605 Bright Brass 628 Clear Anodized

18 18 FLUSHBOLTS & PIVOTS MS1880, MS1881 Two-Point Flushbolts MODELS & FINISHES 119, 121, 682 MS1880 Hourglass shaped turn $ MS1881 Teardrop shaped turn $ MODEL 119, 121, 682 TDK-1880 Tall door kit for doors over 84". 144" maximum $26.00 MODEL TURN SHAPE CYLINDER HEIGHT* FINISH MS MS18 80 Hourglass 01 31" to 35" 119 Black 81 Teardrop /16" to 39" 121 Dark Bronze /16" 43" 682 Satin Chrome /16" to 47" /16" to 51" *Distance from floor to cylinder centerline. MS2180 Auto-Release Two-Point Flushbolt MODELS & FINISHES 119, 121, 682 MS2180 7, 8, 9, 10 door height $ PRODUCT NO. TURN SHAPE DOOR HEIGHT (FROM FLOOR TO TOP OF DOOR) FINISH TO MATCH MS Hourglass 07 Up to 7' Door 119 Black Anodized 1 Teardrop 08 Up to 8' Door 121 Dark Bronze Anodized 2 Flush 09 Up to 9' Door 130 Clear Anodized 10 Up to 10' Door B1921, B1923 Reinforcing Pivots MODELS & FINISH US2G B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing. $82.00 B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. $68.00 PRODUCT NO. MODEL B " 3 4-1/2"

19 EXIT DEVICES 19 EXIT DEVICES Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options. Split finishes (faceplate/pushbar) are not available Dummy Pushbar MODELS & FINISHES Dummy pushbar without mechanism, for doors NOT requiring an exit device M0 Active dummy bar without latching mechanism, without monitoring switches M1 Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar. 313, 335, 628 US4, US32D US3, US32 $ $ $ $ $ $ $ $ $ $ PRODUCT NO. MONITOR DOOR TYPE PUSHBAR FINISH WIDTH US FINISH M US32 00 Inactive Dummy Bar 3 Aluminum 0 US Finish inches US3 Bright Brass M0 Active Dummy Bar, no monitoring switches 4 Wood or hollow metal 1 Clear Anodized inches US4 Satin Brass M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized inches US32 Bright Stainless M2 Active Dummy Bar, two monitoring switches 3 Black Anodized inches US32D Satin Stainless 3100, 8100 Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Surface vertical rod for wood and hollow metal doors $ $1, $1, T Top rod only $ $1, $1, Fire-rated surface vertical rod $1, $1, $1, T Top rod only for metal doors $1, $1, $1, W Top rod only for wood doors $1, $1, $1, MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH END CAPS OPTION FOR US FINISH SE M2-30 -US32D MEC 31 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass MEC Matching End Caps 81 Life-Safety 11 Clear W Top Rod only - SE Silent Electrification Anodized 628 Wood doors Latch Retraction M2 Dual Switch inches US4 Satin Brass 22 Dark Bronze Anodized Black Anodized Standard rod C Cylinder Dogging (non-fire rated devices ONLY) (Blank) No Monitor inches US32 Bright Stainless ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width * Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

20 20 EXIT DEVICES 8200 Narrow Stile Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Narrow stile surface vertical rod exit device $ $1, $1, T Top rod only $ $ $1, Kitted Options MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Tall door kit for doors up to 10' tall, for use with 8100, 8200 $ $ $ MODEL & FINISHES 313, 335, 628 US32D US Tall door kit for doors up to 10' tall, for use with 3100 $ $ $ MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH ED M2-36 -US3 END CAPS OPTION FOR US FINISH 82 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass MEC Matching End Caps 11 Clear Anodized Standard rod 22 Dark Bronze Anodized 313 SE Silent Electrification Latch Retraction C Cylinder Dogging M2 Dual Switch inches US4 Satin Brass (Blank) No Option inches US32 Bright Stainless 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width 3300, 8300 Mortise Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Mortise type exit device $ $1, $1, Fire-rated mortise type $ $1, $1, Kitted Options MODELS & FINISH 8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only US32D $ Open back strike for 1-3/4" thick doors $ MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONS MONITORING OPTION DOOR HANDING PUSHBAR FINISH DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening ED M -7 3 A36B 33 Fire Rated 0 US Finish 83 Life-Safety 1 Clear Anodized Dark Bronze Anodized Black Anodized Flat (3300 only) 2 Bevel (8300 only) LR Electric Latch Retraction SE Silent Electrification Latch Retraction C Cylinder Dogging (nonfire rated devices ONLY) ED Electric Dogging US FINISH M Single Switch 7 RHR 0 US Finish inches US3 Bright Brass M2 Dual Switch (Blank) No Monitor 8 LHR 1 Clear Anodized Dark Bronze Anodized Black Anodized inches US4 Satin Brass inches inches US32 Bright Stainless US32D Satin Stainless END CAPS OPTION MEC Matching End Caps - Without Options AXXB Alarmed Exit Device where XX is door opening width *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

21 EXIT DEVICES Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Mortise type exit device for single leaf $ $ $ Kitted Options MODELS US32D Long face strike for covering MS strike prep $ Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door $ * 2" thick door kit for use with 8300, 8400 $ * 2-1/4" thick door kit for use with 8300, 8400 $ * 2-1/2" thick door kit for use with 8300, 8400 $ * 2-3/4" thick door kit for use with 8300, 8400 $ * 3" thick door kit for use with 8300, 8400 $ Thermal door kit, 1/4" cladding, for use with 8400 $ Thermal door kit, 1/2" cladding, for use with 8400 $ MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONS MONITORING OPTION BACKSET DOOR HANDING * Order 8360-xx or 8460-xx long lip strike kit separately as required. PUSHBAR FINISH DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening SE M Life-Safety 0 US Finish 1 Clear Anodized Dark Bronze Anodized Black Anodized Flat, Radius, Bevel 4 Radius w/ Weatherstrip LR Electric Latch Retraction SE Silent Electrification Latch Retraction C Cylinder Dogging ED Electric Dogging - Without Options M Single Switch M2 Dual Switch (Blank) No Monitor 2 31/32" 7 RHR 0 US Finish inches 3 1-1/8" 8 LHR 4 1-1/2" 1 Clear Anodized Dark Bronze Anodized Black Anodized inches inches inches US FINISH US3 Bright Brass US4 Satin Brass US32 Bright Stainless US32D Satin Stainless AXXB Alarmed Exit Device where XX is door opening width END CAPS OPTION FOR US FINISH MEC Matching End Caps Radius with weatherstrip faceplate is not available in US finishes.

22 22 EXIT DEVICES 3600, 8500 Metal Door Concealed Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Concealed vertical rod exit device $ $ $ T Top rod only $ $ $ Fire-rated concealed vertical rod $1, $1, $1, T Top rod only $ $1, $1, Kitted Options MODEL 3655 Tall door kit for doors taller than 66" above bar height, up to 10' $52.00 MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH T ED M -36 -US32D 36 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass 85 Life-Safety 11 Clear Anodized Standard rod 22 Dark Bronze Anodized 313 SE Silent Electrification Latch Retraction C Cylinder Dogging (non-fire rated devices only) M2 Dual Switch inches US4 Satin Brass (Blank) No Monitor inches US32 Bright Stainless END CAPS OPTION FOR US FINISH MEC Matching End Caps 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option Narrow Stile Concealed Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Concealed vertical rod exit device $ $ $ T Top rod only $ $ $ Kitted Options MODEL 8655 Tall door kit for doors up to 10 for use with 8500, 8600 $50.00 MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening T SE M2-36 US FINISH 86 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch inches US3 Bright Brass 11 Clear Anodized Standard rod 22 Dark Bronze Anodized 313 SE Silent Electrification Latch Retraction C Cylinder Dogging M2 Dual Switch inches US4 Satin Brass (Blank) No Monitor inches US32 Bright Stainless 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width END CAPS OPTION FOR US FINISH MEC Matching End Caps

23 EXIT DEVICES , 8700 Rim Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Rim type exit device $ $ $ Fire-rated rim type $ $ $1, MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH END CAPS OPTION FOR US FINISH EL M1-36 -US3 MEC Fire Rated 00 US Finish 87 Life-Safety 01 Clear Anodized 628 EL Electric Latch Retraction (indicate 12V/24V) SE Silent Electrification Latch Retraction 02 Dark Bronze Anodized 313 C Cylinder Dogging M Single Switch inches US3 Bright Brass MEC Matching End Caps VOLTAGE 12 Volts M2 Dual Switch inches US4 Satin Brass 24 Volts (Blank) No Monitor inches US32 Bright Stainless 03 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless - Without Options AXXB Alarmed Exit Device where XX is door opening width (For EL Option Only) *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option Narrow Stile Rim Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Rim type exit device $ $ $ Kitted Options MODELS N/A 313, Mullion for doors up to 8' for use with 8700, 3700 $ Mullion for doors up to 10' for use with 8700, 3700 $ Aluminum mullion for doors up to 8' for use with 8800 $ Aluminum mullion for doors up to 10' for use with 8800 $ MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH END CAPS OPTION FOR US FINISH C M Life-Safety 00 US Finish 01 Clear Anodized 628 EL Electric Latch Retraction (indicate 12V/24V) SE Silent Electrification Latch Retraction M Single Switch inches US3 Bright Brass MEC Matching End Caps VOLTAGE 12 Volts M2 Dual Switch inches US4 Satin Brass 24 Volts 02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor inches US32 Bright Stainless 03 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless - Without Options AXXB Alarmed Exit Device where XX is door opening width (For EL Option Only)

24 24 EXIT DEVICES 3900, 8900 Wood Door Concealed Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US Wood door concealed vertical rod exit device $ $1, $1, Fire-rated wood door concealed vertical rod $1, $1, $1, Kitted Options MODEL Tall door kit for doors up to 10 for use with 8900 $ Tall door kit for doors up to 10 for use with 3900 $52.00 MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION DOOR OPENING WIDTH On pair of doors, specify HALF of the total exit opening US FINISH W LR M2-36 -US32 END CAPS OPTION FOR US FINISH 39 Fire Rated 00 US Finish W Top Rod Wood LR Electric Latch Retraction M Single Switch inches US3 MEC Matching Bright Brass End Caps 89 Life-Safety 11 Clear Anodized Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch inches US4 Satin Brass 22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor inches US32 Bright Stainless 33 Black Anodized 335 ED Electric Dogging inches US32D Satin Stainless (Blank) No Option AXXB Alarmed Exit Device where XX is door opening width *Please note that 30 exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option. ACCESSORIES FOR EXIT DEVICES OPTIONS & FINISHES N/A US4, US32D US3, US32 SE Silent electrification motorized latch retraction $ EL Electric latch retraction for use with 3700, 8700, 8800 rim exit devices $ ELD Electric latch retraction with mechanical dogging for rim exit devices only $ LR Electric latch retraction $ ALARM Battery-operated alarmed exit device $ M1 Request to exit - monitor/single signal switch $ M2 Request to exit - monitor/double signal switch $ C Cylinder dogging $47.00 ED Electric dogging $ MEC Matching end caps $77.00 $99.00

25 EXIT DEVICES ELECTRIC STRIKES 25 KITTED OPTIONS FOR EXIT DEVICES MODELS & FINISHES N/A ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device. Includes new pushbar, end caps and installation hardware Single signal switch kit, retrofits to 3000/8000 $ Double signal switch kit, retrofits to 3000/8000 $ , 335, 628 US4, US32D US3, US32 $ $ $ US26D, US XXX-MP Sex bolts, 2 per bag, 2 kits required per exit device $20.00 MODIFICATION OPTIONS FOR EXIT DEVICES MODELS THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices $60.00 UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48" $80.00 NOTE: Thick door modification options are available for 8300, 8400, and 8600 model exit devices only. ELECTRIC STRIKES 7100, 7101 Electric Strikes MODELS & FINISHES 313, 335, For aluminum jambs $ $ For radius aluminum stiles $ XX7, OR -XX9 Monitoring signal switches $ $ Lip Extensions up to 3 for center-hung or non-flush doors add $32. PRODUCT NO. FACEPLATE SHAPE VOLTAGE CURRENT AND DUTY FEATURES* FINISH** LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge) Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized /16" or less 05 2" 1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized /2" /4" 7 Monitored/ Fail-Safe 626 Satin Chrome /8" /2" 9 Monitored/ Fail-Secure 628 Clear Anodized /4" /8" *Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.

26 26 ELECTRIC STRIKES 7110, 7111 Electric Strikes MODELS & FINISHES For wood jambs $ For wood jambs, long faceplate $ XX7, OR -XX9 Monitoring signal switches $ Lip Extensions up to 3 for center-hung or non-flush doors add $32. PRODUCT NO. FACEPLATE LENGTH VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge) /16" 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 652 Satin Chrome /16" or less 05 2" /4" 5 24 Volt 4 AC Intermittent 5 Fail-Safe /2" /4" 7 Monitored/ Fail-Safe /8" /2" 9 Monitored/ Fail-Secure /4" /8" *Fail-secure can be field converted to fail-safe or vice-versa. 7130, 7131 Electric Strikes MODELS & FINISHES 313, 335, For aluminum jambs, pre-cut for MS lock strike $ For radius aluminum stiles, pre-cut for MS lock strike $ Lip Extensions up to 3 for center-hung or non-flush doors add $32. PRODUCT NO. FACEPLATE LENGTH VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge) Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized /16" or less 05 2" 1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized /2" /4" 628 Clear Anodized /8" /2" /4" /8" *Fail-secure can be field converted to fail-safe or vice-versa.

27 ELECTRIC STRIKES Electric Strike MODEL & FINISHES 313, 335, ANSI size for hollow metal and wood jambs $ $ Lip Extensions up to 3 for center-hung or non-flush doors add $32. PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge) Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized /16" or less 05 2" 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized /8" /4" 626 Satin Chrome /2" /2" 628 Clear Anodized /8" /8" /4" *Fail-secure can be field converted to fail-safe or vice-versa Electric Strike MODELS & FINISHES 313, 335, For aluminum jambs $ $ XX7 OR -XX9 Monitoring signal switches $ $ Lip Extensions up to 3 for center-hung or non-flush doors add $32. PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A) (Door Centerline to Jamb Edge) Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized /16" or less 05 2" 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized /2" /4" 7 Monitor/Fail-Safe 626 Satin Chrome /8" /2" 9 Monitor/Fail-Secure 628 Clear Anodized /4" /8" *Fail-secure can be field converted to fail-safe or vice-versa Electric Strike MODELS & FINISHES 313, 335, For hollow metal and wood jambs $ $ XX7 OR -XX9 Monitoring signal switches $ $ Lip Extensions up to 3 for center-hung or non-flush doors add $32. PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A) Door Centerline to Jamb Edge Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized /16" or less 05 2" 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized /8" /4" 7 Monitor/Fail-Safe 626 Satin Chrome /2" /2" 9 Monitor/Fail-Secure 628 Clear Anodized /8" /8" /4" *Fail-secure can be field converted to fail-safe or vice-versa.

28 28 ELECTRIC STRIKES 7100 Series Electric Strike Components STRIKE BODY KITS 7103A-XXX $ A-XXX $ One strike body kit matched with one faceplate kit makes a complete electric strike. FACEPLATE KITS & FINISHES 313,335, 628 US26D US3 FPK00 For use with body kits: 7103A, 7173A $30.00 $50.00 $53.00 FPK01 For use with body kit: 7103A $30.00 FPK10 For use with body kit: 7103A $63.00 $86.00 FPK11 For use with body kits: 7103A, 7173A $66.00 $89.00 FPK30 For use with body kit: 7103A $34.00 FPK31 For use with body kits: 7103A, 7173A $34.00 FPK40 For use with body kit: 7103A $30.00 $50.00 $53.00 FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover. $33.00 Faceplate kits contain all hardware to mount electric strike. KITTED OPTIONS through -13 Lip extension kits for use with 7100 through 7140 $ Lip extension kits for use with 7100 through 7140 interior framing systems $ through -13 Lip extension kits for use with 7160 and 7170 $ Lip extension kits for use with 7160 and 7170 interior framing systems $ LIP EXTENSION LIP EXTENSION PART NUMBER APPLICABLE ELECTRIC STRIKES through , 7110, 7111, 7130, through , through , LIP EXTENSION DIMENSIONS DASH PART NUMBER DIMENSION A DOOR CENTERLINE TO JAMB EDGE DASH PART NUMBER DIMENSION A DOOR CENTERLINE TO JAMB EDGE DASH PART NUMBER / / / / / / / / / / / /2 DIMENSION A DOOR CENTERLINE TO JAMB EDGE