INTRODUCTION. Double-lever sockets for changing handle angle. Replaceable trunnions. Reversing lever.
|
|
- Zoe Phelps
- 6 years ago
- Views:
Transcription
1 MCHNICL INTRODUCTION TH SIMPLX PLUS SIMPLX MCHNICL Multiple-toothed pawls give greater contact with rack bar. Plated springs resist corrosion. djustable spring links. Ductile iron housing for maximum strength. Double-lever sockets for changing handle angle. Replaceable trunnions. Reversing lever. RTCHT Jacking Column 1-0 ton capacities. vailable with aluminum or ductile iron housing. Lifting Screw will not creep down under load. Positive Shoulder Stops for Safety. all earings for smooth operation & low handle effort. Reversal Ratchet Socket w/quick spin handle. SUPR Drop-forged steel load cap is serrated to prevent load slippage. Single chrome-moly ball reduces operating friction. Ductile-iron housing for strength. Four-way head permits lever bar insertion at four angles. Welded Stop for safety. SCRW
2 RTCHT s. Double-lever sockets for jacking in close quarters. Multiple-tooth pawls for strength & safety. Drop-forged, alloy steel, heat-treated components. djustable spring links. Plated springs to resist corrosion. Precision machining throughout. Large base insures a firm foundation. Supports full rated capacity on the toe or the cap. Steel lever bars sold separately. MCHNICL 17 9 is used to lift a CNC machine for installation. Five ton lifting capacity, low toe height and light weight make the models,, & universal tools. Ten ton models 17 & are used extensively by structural movers, riggers & maintenance crews. Ton Ratchet Jacks These units are all mechanically identical and vary only in stroke and height. Ton Ratchet Jacks The 17 and incorporate a ductile iron housing for maximum durability. The, which is identical to the except for an aluminum housing, is the ideal choice when portability is important. These jacks are often selected for lifts of tons or less because of their low handle effort. Ratchet Jacks 1 Utility Pole Jack Light weight aluminum alloy housing is used for pole lining maintenance by telephone, light and power, and railroad companies. Jack pivots, I-eam base assures firm foundation. lloy steel chain, I-eam base, and steel lever bar are all ordered separately. I-eam ase #: 00 lloy Chain #: Supporting Cap. Lifting Cap. Stroke / Handle ffort per Ton / 1 1/ 1 1/ Pivot ases are included on model 1. Optional for the 1 are I-eam ase (#00) and Chain (#70). Cap Min / 0 1 / Toe Min. 1 / 1/ ase Size x 7 / x / 1/ x 1/ x 1/ x 1/ x Steel Lever ars Length 0 7 Note: & 7 lever bars are interchangeable. The longer 7 bar results in lower handle efforts. 1 11/ 11/
3 MCHNICL RL Simplex Reel Jacks re Standard quipment t Utilities. s. Double-lever sockets. Multiple-tooth pawls for strength & safety. Forged alloy steel, heat-treated components. djustable spring links. Plated springs to resist corrosion. Precision machining throughout. Steel lever bars sold separately. Tough hardwood bases laminated for extra strength. 1 With three hooks; top fits up to mm spindles; side hooks fit up to spindles. 1 (shown above) With five hooks; top fits up to 1/ spindles, next hook down fits up to spindles, and lowest three fit up to / spindles. This model is recommended for use on firm surfaces. 9 The 9 has a light weight aluminum alloy housing and three hooks; top fits up to spindles, side hooks fit up to / inch spindles. quipped with right or left-handed t-base, supported by three adjustable steel rods to provide a sturdy, non-rocking foundation for outside use. Caps swivel for easy reel mounting. Steel lever bars are ordered separately. Using 9-R and 9-L, utilities can easily handle large reels. The large wooden bases and low handle efforts enhance safety and reduce operator fatigue. Simplex Reel Jacks are also an excellent choice for wire rope and sling manufacturers. Reel Jacks Capacity per Pair 1 9-R 9-L Side Hooks Top Hooks Handle ffort per Ton Stroke 11 / Reel Top Hook 1 1/ 1 1/ 1 0 * Steel Lever ars Length *Lever bar 7 can be substituted resulting in lower handle effort / 17
4 SUPR Steel Fabricators Use Simplex Superjacks In Rough nvironments. MCHNICL Jacking Column 1-0 ton capacities vailable with aluminum or ductile iron housing. Lifting Screw will not creep down under load. Positive Shoulder Stops for safety. s. Holds the load indefinitely without creep down. Positive stop. High capacities. Low handle efforts. Steel lever bars sold separately. all earings for smooth operation & low handle effort Reversal Ratchet Socket w/quick spin handle. Outdoor use and weld splatter can shorten the life of standard jacks. "We chose Simplex Superjacks for the bullet proof construction and holding power." They provide trouble-free service in the roughest applications. Superjacks 1C C C 1C D D 0 0 Cap. 1 0 Min. 1/ 1 1/ /1 Stroke 9 Handle ffort Per Ton (lbs.) 9 ase 1/ 7 1/ Steel Lever ars Length / 1 7
5 MCHNICL SCRW 9 s. Ductile iron bodies for strength. Positive stop for safety. Supports loads indefinitely, and won't creep down. Serrated load cap. Steel lever bars sold separately. Drop-forged steel load cap is serrated to prevent load slippage. Single chrome-moly ball reduces operating friction. Simplex screw jacks are used to adjust the height of this roller fixture. We use this fixture during the assembly of long pieces of screw stock. Simplex screw jacks makes fixturing easy and precise. Four-way head permits lever bar insertion at four angles. Ductile-iron housing. Welded Stop Screw Jacks x x x x x x 1/ x 1/ x 1/ x Sustaining Capacity Closed 9 / 11 / 1 / 11 / 1 / 1 / 1 17 Stroke / / 9 / 7 9 1/ 1/ 1 1/ Handle ffort Per Ton (lbs.) 1 1 ase / 1/ 1/ 1/ / 1/ 7 1/ 1/ Steel Lever ars Length Dia / 1/1 11/
6 SCRW & CP SSMLIS MCHNICL Versatile accessories for outrigger supports, holding and adjusting concrete forms, or for any application requiring special holding or shoring support. The shouldered nut is placed into piping or another fixed form, and the screw & cap assembly is threaded through it. Four-way head assembly accommodates the lever bar at four different positions for infinite height adjustments and exact leveling. Drop forged serrated steel cap floats 9 on a chrome-moly ball reducing friction by %. 1 Screw and Cap assemblies support the outer wall of a large generator assembly at the Grand Coulee Dam. The assemblies also are used to exert pressure, stabilizing the generator laminations. }The shoulder nut is placed into piping, fixtures or other fixed forms supplied by the user. D C L DIMNSIONL DT FOR SCRW ND CP SSMLIS C D Screw & Cap ssemblies C-0-0 C C-0-07 C-0-0 C-0-0 C-0-0 1/ C / C / C Shoulder Nuts Sustaining Capacity Modified cme Thread -Pitch - - 1/ 1/ - 1/ 7/ 1/ 1/ C 1/ 7/ 1/ Dimensions D 7/ 1/1 / 1 /1 1/1 L 11/1 7 11/ /1 7 9/1 9 9/1 11 9/1 7 1/1 11 1/1 17 1/1 1/ 1/ 7 / 1/ 1 1/ 1 / 1 / 9 1/ 1 Steel Lever ars Length Dia / 1/1 11/ NS- NS- 1/ NS / 1/ - 1/ 1/ 1/1 1/ 1/ 1/ /
7 MCHNICL TNK SIMPLX FILTR ND STORG TNK Simplex Tank Jacks offer an economical means of supporting and leveling vertical, bottom, or side-opening filter and storage tanks. Screw operation provides infinite adjustment for exact tank leveling and gravity flow. Rated capacity for all models is 1,000 lbs. C steel saddle is welded to the tank before being set on the jack. Tank Jack Dimensions "RD FIGUR 1 1/" C ase ase Min. Max. "" "C" "C" 0 0 / / Saddle Use this chart with Fig. 1 to determine the Tank Jack dimensions. For bottom pipe connections Sug. Jack "D" "H" Tank (ft-in) For side pipe connections Tank (ft-in) Pipe 1/ 1/ 1/ 1/ Pipe 1 1 Sug. Jack "D" / 11 7/ 1/ 1 / 1 1 / 1 / 1 1/ 1 / / 1 "H" 1/ / / 7 1/ 7 1/ 1/ 1/ 7/ 7 1/ 7 / / / "C" / 1 1/ 1 1/ "C" 1/ 1/ 1/ 1/ 1/ 1/ Qty. Required Under Over Ft. Ft. Qty. Required Under Over Ft. Ft. Use the installation data charts, with accompanying drawings, to determine the size and number of jacks your application will require. H DISH RDIUS = DI. OF TNK C D D C DISH RDIUS= DI. OF TNK H
8 PUSH/PULL MCHNICL SIMPLX STMOT JCK These ton capacity models are used for connecting river barges, pulling forms and steel plates together and other applications in bridge construction and concrete and steel engineering projects. Units are equipped with spring activated pawls and long attached handles. The handle effort per ton is 1 lbs. The I.D. of the eye is 1 /1. Depth of eye is 1 7/. R- R- R-0 R-0 Dim. "" 9 7 Travel 1 arrel Length 1 0 Screw SIMPLX PUSH/PULL JCK The model is used for pushing or pulling, holding & more; ideal for weld shops. For added versatility, the end nuts are designed to permit the use of chains with eye hooks. Steel lever bar is ordered separately. Min / Max 1/ 1 /1 1 1/ / /1 / Min 7/ Max 7 / /1 SIMPLX -1 RTCHT SCRW SSMLY The ratchet screw assembly may be custom adapted to almost any push/pull application such as adjusting forms, fixtures, doors, flues, and dampers. Incorporates 1 1/- cme class G, right and left hand thread. -1 Centered Capacity Hook/Toe Offset Load Capacity Travel 1/ - Handle ffort Per Ton 1 1 Screw 1 1/ 1 1/ Length - 1 Steel Lever ars Length Dia 1 /
9 MCHNICL SPRDR JCK The model Spreader Jack Is used when working in close quarters. The Spreader Jack has a closed height of only, with 1 stroke for adjustments, yet it can support tons. The serrated cap rotates to prevent twist out, but does not pivot. The Spreader Jack may also be used as a planer jack. 1 1/ The Spreader Jack can easily be extended by fitting a 1 diameter pipe in the base well and a 1/ diameter pipe in the cap well. PLNR Four different models are available, with capacities ranging from to tons. They are used in leveling work on plane beds, millers and other machinery. Screw's operation provides infinite height adjustments for exact leveling. The side-locking screw keeps the jack extended and prevents lowering due to vibration. The ball and socket cap swivels to center load forces. The notched base fastens easily to machine beds. 1P P P P Sustaining Cap. Minimum / / 1/ 7 1/ Operable Rise 1 1/ cross Flats / 1/ /
10 TRNCH RCS MCHNICL Simplex Trench races provide efficient, economical protection against cave-ins and costly redigging in construction and utility maintenance. races extend by turning the lever nut handle. The ball socket joints tilt for added safety on angular mounting. Holes on each end facilitate mounting to wood members. utt nd Screw nd (Fig. 1) ll Trench race s Schedule 0 or Pipe Specifying Simplex Trench races Simplex trench braces are designed for use with standard schedule 0 pipe. Screw end models S-, S-1 and butt end model - use " diameter pipe. S-1 and butt end - use " diameter pipe. Pipe should be cut to length based on the chart below and drawing in Fig. 1. S- S-1 S-1 djust Range 7 Pipe Size utt nd - - "" Min. Pipe Length 1 1 "" Min. Closed Ht. 1 1/ Dimensions assume the use of both screw & butt ends together as an assembly. Quick Reference Timber/Trench race quivalency Tables* The following charts are based on OSH Timber/Trench race Charts* which do not consider transverse loading conditions. Soil Type Trench Depth to to 1 P a = x H + 7 psf (ft. Surcharge) up to S S1 S S1 S1 S1 S S1 S1 Cross race Width of Trench up to S S1 S S1 S1 S1 S S1 S1 up to S1 S1 S1 S1 Vertical Spacing Size x up to x Soil Type P a = x H + 7 psf (ft. Surcharge) Trench Depth to Horizontal Spacing up to up to up to up to up to Horizontal Spacing up to Cross race Width of Trench up to S-1 up to S-1 Vertical Spacing Size x Wales Not Req. Not Req. Wales Vertical Spacing Vertical Spacing * Refer to OSH Standard, 9CRF 19, subpart P-xcavations (tables C-1.1 & C-1.). Uprights Max. llowable Horizontal Spacing (Ft) ' ' ' ' "x" "x" Uprights Max. llowable Horizontal Spacing (Ft) ' "x" "x" "x" "x" "x"
11 MCHNICL MIN ROOF SUPPORTS Head ssembly 0917 ase ssembly 09 Type FS Head For support with wooden or rubber cap pieces. Type S Head square inches in support area and MS9L-FS MS9L-S MS17L-FS "" Min. Pipe Length 1/ / 1 / "" Min. Closed 7 1/ / Simplex head assemblies are designed for roof support in mines and other areas where ceiling heights vary greatly. Use your own pipe to custom build a support for nearly any application. The ton MS-9 models use " schedule 0 pipe. The 1 ton MS-17 models require " schedule 0 pipe. round base (ordered separately) is available to fit the " pipe. ll models incorporate a lever nut handle and are available with either FS or S style heads. For economy, use the import version. If U.S. manufacture is required, use the domestic version. Simplex quality is assured with either choice. 11 Mine Roof Support Head ssemblies MS9L-FS MS9L-S MS17L-FS ase M-17 Domestic N/ 09 Import Head Style FS S FS Sustaining Capacity * Maximum pipe length recommendations are based upon the following conditions: Fully extended assemblies loaded to maximum rated capacity. Head and base securely fixed to prevent lateral movement. Schedule 0 pipe with a minimum yield strength of,000 psi/ ton models. Schedule 0 pipe with a minimum yield strength of,000 psi/1 ton model. 1 1 Stroke 1 *Max. Pipe Length 1 / 7 1/ 1/ Max. xtended Ht Dim. etween Flanges / / 19 19
12 MIN ROOF SUPPORTS MCHNICL The 9 Family is rated at tons sustaining capacity, and is suitable for a wide range of mine maintenance applications. The aluminum alloy housing and base, coupled with a convenient carrying handle, make this unit exceptionally light and portable. The 9 Family incorporates a ratchet mechanism for speedy operation. Lever bar # is ordered separately. The 19 Family is a screw extension type roof support rated at tons sustaining capacity. Designed for use as a safety prop, the 19 Family is suitable for cross timbering with wood or steel beams. 9 HD STYLS Type Head For all standard work. Dimension between flanges: 1/. Type F Head For use with electrical wiring. Dimension between flanges: 1/. 19 Type S Head square inches in support area. Complete Unit Ratchet Lever Series - 9 Family Head Style Minimum 7 Stroke 090 F S F 0907 S F S F S F S F 0919 S 09 Complete Unit Screw xtension Series - 19 Family F S F S F S F S F S
Tel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationSALE SALE SALE palmgren.com chhanson.com SWIVEL BASES SPEED HANDLES
FRIENDS OF PALMGREN SPECIAL OFFERS WORKHOLDING S EVENT DUAL FORCE PRECISION MACHINE VISES Palmgren s Dual Force line of machine vises are all designed for precision part clamping and are ideal for use
More informationMECHANIC VISES VERSATILE, RUGGED AND BUILT WITH YOU IN MIND A B
wiltontool.com Wilton is committed to being a supplier you can depend on for the epitome of quality, innovation and service. This isn t just a statement to make us sound good it s a reality that has been
More informationCelebrating. 65 Years
Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationDependable and tough, the Saddle Machine was specifically SADDLE MACHINES. Saddle Machines Include:
SADDLE MACHINES Just a brief note to say I am very pleased with my Mathey Short Saddle Machine... it is as old or older than I am and it has had new parts and pieces... but it still performs very well
More informationTOGGLE CLAMPS. General Information HOLDING CAPACITY CLAMPING FORCE. Vertical Handle Horizontal Handle
TOGGLE CLAMPS Vertical Handle... 128-130 Horizontal Handle... 131-132 Straight Line Action... 133-135 Pull Action... 136-138 Accessories...138 General Information HOLDING CAPACITY The holding capacity
More informationSteel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationExperience the Hi-Lite Advantage
Experience the Hi-Lite Advantage 12K Aluminum Shoring System INTRODUCTION The 12K Shoring System is primarily a hand-set system. It can also be handled with a crane, and may also be used quite successfully
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationNUMBER 1 Di-Acro Hand Notcher
OPERATOR S MANUAL & INSTRUCTIONS NUMBER Di-Acro Hand Notcher Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 373 Progress Street N.E. Canton, Ohio 705 330-55-9 330-55-00 (fax) Revised 0/0 Sale or distribution
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationSwivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationHeavy Duty Pipe Wrench
Heavy Duty Pipe Wrench High-tensile ductile iron handle and hardened tool-steel parts. Designed to withstand heavy demands. Easy-spin adjusting nut is heat-treated for durability. Drop-forged jaw is heat-treated
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationTable of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationStargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe INFORMATION The Stargrip Mechanical Joint Restraint System is a unique product with a proven design that provides an exceptional
More informationTABLE OF CONTENTS REQUIRED TOOLS
TABLE OF CONTENTS SECTION SECTION TITLE PAGE NO. 1 2 3 4 5 Assembling Mounting Structure Installing Bicycle Supports Mounting Rack to Wall Adding Sections Customizing Rack Configuration REQUIRED TOOLS
More informationSECTION CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP
1 1 1 0 1 0 1 0 1 SECTION 1 1 CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP BASED ON DFD MASTER SPECIFICATION DATED /01/ P A R T 1 - G E N E R A L SCOPE The work under this section shall consist of
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationSA SERIES SURFACING MACHINES
SA SERIES SURFACING MACHINES The S8A is designed to surface large diesel heads, blocks and manifolds. All SA machines use the same tooling and fixturing for quick, rigid setup and versatility. Fine surface
More informationDecide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
More informationFeatures. Reduced Floor Space Compact, one piece castings and multi layer slideway guards give the most compact surfacing machines available today.
The S8A is designed to surface large diesel heads, blocks and manifolds. All SA machines use the same tooling and fixturing for quick, rigid setup and versatility. Fine surface finishes are easily obtained
More informationMEP Shoring System Technical Instruction Manual
MEP Shoring System Technical Instruction Manual The MEP Shoring System is a versatile yet simple system capable of handling virtually any project with only two basic components: The post shore and the
More informationITEM# CASE DESCRIPTION PRICE
Impact Socket Accessories - Drop Forged Steel, Heat Treated, Black Oxide Finish 13-IEB346 20 Impact Extension Bar - 3/4" Dr. x 6" 46.32 13-IEB383 20 Impact Extension Bar - 3/8" Dr. x 3" 3.56 13-IEB386
More informationKOLO SHELTER Installation Instructions Parts List
Parts List Roof Cap Rafter Upright Polycarbonate Polycarbonate Drop Polycarbonate Flange Center Weldment (Short length shown above) Polycarbonate Edge Bolt.25 x 6.5 Bolt.625 x 7.5 Threaded Rod.75 x 14
More informationInTurn Ultra and Ultra-T Indexing and Turning 4 th axis
Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both
More informationInstructions and Parts List DR-12N Martin House
Form 36-99 Instructions and Parts List DR-N Martin House Note: It is necessary to install a post before house is put up, but the house can be assembled at any time. House parts Check parts against this
More informationMM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationMM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationBuildPro Welding Tables
Introducing the new BuildPro Welding Tables The affordable, professional BuildPro Welding Tables are setting a new standard in price and performance. Plates can be reconfigured to extend the width of the
More informationHandle Length (in.) Ultimate Load (lbs.) Weight Each (lbs.)
L-150 Lever Type Binder Lebus Binders Extra heavy construction at leverage point to prevent spreading. Heel of binder toggles away from load, permitting easy release. Ball and socket swivel joints at hook
More informationCRYSTEEL S. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S Grain Tipper mounting and operating instructions this manual must be included with the vehicle after completing the installation. Web Site E-Mail
More informationH20 Beam for Elevated Slabs Application Guide
H20 Beam for Elevated Slabs Application Guide A WORD ABOUT SAFETY High productivity depends on safety; even a minor accident causes job delays and inefficiency, which run up costs. That s why Symons, in
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More informationHOLD IT. EVEN PRESSURE. ODD SIZES. INTRODUCING THE AUTO-PRO AUTO-ADJUST TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL
HOLD IT. INTRODUCING THE AUTO-PRO TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL EVEN PRESSURE. ODD SIZES. PATENTED MECHANISM 888.695.3055 armor-tool.com TABLE OF CONTENTS Auto-Pro
More informationThis go-round puts kids in orbit
This go-round puts kids in orbit By DAVID A. GATTIS You DON'T NEED NASA to put your kids in orbit. They'll really get a blast out of this attachment that adds whiz-around variety to the backand-forth motion
More informationKO LO SH E LT E R. High Capacity and Flexibility
KO LO SH E LT E R High Capacity and Flexibility The unique styling of our redesigned Dero Kolo Shelter will help beautify your facility and provide secure, covered bike parking for cyclists. The Kolo is
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationPipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings
Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More informationT A G PIPE ALIGNMENT CLAMPS PIPE EQUIPMENT SPECIALISTS LTD WB ALLOY WELDING PRODUCTS LTD WB ALLOY WELDING PRODUCTS LTD
WB ALLOY WELDING PRODUCTS LTD T A G PIPE EQUIPMENT SPECIALISTS LTD PIPE ALIGNMENT CLAMPS WB ALLOY WELDING PRODUCTS LTD E-Z FIT RED Pipe welding clamp 1-12 o/d Quick and E-Z to use Rugged frame, built for
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationTOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationS8M S7M. Soft Touch Buttons with LED Lights Soft Touch Buttons light up a LED once pressed - simplifying operation.
S8M surfacing machines Soft Touch Buttons with LED Lights Soft Touch Buttons light up a LED once pressed - simplifying operation. S8M with Large Diesel Block Solid Steel Way Guards Heavy duty sliding steel
More informationPERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT SF8M The SF8 is sized to surface diesel heads, blocks and manifolds. All SF machines use the same tooling and fixturing for quick, rigid
More informationKindorf. With Right Angle, you get Flexibility Simplicity Economy! Right Amite Angle Slotted Angle Systems. ThomasaBeits
Right Amite Angle Slotted Angle Systems With Right Angle, you get Flexibility Simplicity Economy! Create the support framing you need. Right Angle is manufactured from commercial-quality steel in three
More informationDown Stage Right -Theatrical and Entertainment Rigging Supplies
Shackle Plates There are five uniquely different designs in the Shackle Plates Dynasty. Each one allows you the freedom of choice as you design the rigging requirements of your scenery, as well as meeting
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationAUTOMATIC CIRCLE BURNING AND WELDING
AUTOMATIC CIRCLE BURNING AND WELDING ON PIPE AND PRESSURE VESSELS No Hose or Cable Wrapup (Regardless of Direction or Rotation) Oxy-Fuel Cutting Units, Plasma Cutting Units Wire Feeders and Controls, Motorized
More information1801 Ratchet Bender For 1-1/4", 1-1/2" Rigid Conduit, IMC and Schedule 40 Pipe
INSTRUCTION MANUAL 1801 Ratchet Bender For 1-1/4", 1-1/2" Rigid Conduit, IMC and Schedule 40 Pipe Serial Code RS Read and understand all of the instructions and safety information in this manual before
More informationPrecision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth
Precision Milling Machine Vises Vises & Accessories A B C D E F G H I J K L M N 17.01 4.63 9.25 6 2.05 18.74 3.87 2.87 1.50 1.75 4.84 0.69 7.5 0.71 79 277064 17.20 4.63 8.75 6 2.05 18.94 3.87 2.87 1.50
More informationAssembly instructions. 6x4. Model GH1354A. 6x6. Model GH1357A. 6x8. Model GH1360A. 6x10. Walk-in Greenhouse. Model GH1363A
ssembly instructions x Model GH x Model GH7 x8 Model GH0 x0 Model GH Walk-in Greenhouse Statement ear Customer! May we congratulate you on your new Greenhouse. We feel sure that by following the detailed
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationLinear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
More information4) Drive Mechanisms. Techno_Isel H830 Catalog
4) Drive Mechanisms This section will introduce most of the more common types of drive mechanisms found in linear motion machinery. Ideally, a drive system should not support any loads, with all the loads
More informationWorkshop Solutions PULLERS & SEPARATORS.
Workshop Solutions PULLERS & SEPARATORS Churchbridge Works - Walsall Road, Cannock, Staffordshire, UK. WS11 8JR Tel: +44 (0) 1922 702222 Fax: +44 (0) 1922 702223 E-mail: sales@sykes-pickavant.com SP07/01-PULLER
More informationCALIPERS, DIVIDERS AND TRAMMELS
J.W. DONCHIN CO. 4841-43 W. Chicago Ave. Chicago, IL 60651-3224 Ph: 773-261-2182 Fax: 773-261-2867 Sales@jwdonchin.com www.jwdonchin,com CALIPERS, DIVIDERS 353 Introduction 354 Toolmakers' Spring-Type
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationModel PM Series Three Axis Mills
Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide
More informationSWITCH STAND Switch Stand Assembly Connecting Rod Target Assembly (when required) TURNOUT ACCESSORIES Standard Tie Plates Rail Anchors Joints
Turnouts A turnout is an arrangement of a switch, a frog and closure rails, which diverts rolling stock from one track to another. Because industrial trackwork often handles lighter loads at slower speeds
More informationInstallation and Assembly: Wallmount for CPA100 and Whiteboard
Installation and ssembly: Wallmount for CP100 and Whiteboard Model: 100IWBMOUNT Maximum Load Capacity for Screen: 53 lb (24 kg) Maximum Load Capacity for Projector : 13.5 lb (6 kg) 1 of 16 Visit 3215 the
More informationTouch Screen CNC Control
Touch Screen CNC Control FEATURES Nearly four decades ago, Rottler pioneered automation and programming by utilizing electronics and computers. Today, the SAD Surfacing machines incorporate the latest
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationLayout Tools. Marking and Layout Tools
Best Welds, Contour Sales Vendor Code: BWS, CON Welders & Pipe Fitters Rap-Around Double ruled so both the top and bottom surfaces can be used for layouts - it is never upside-down! Packaged in its own
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationTechnicians of Terror. This is the air valve we make to use with our air
These are pictures of our scissor prop. Technicians of Terror http://www.halloweenfear.com/scissorprop.html props. This is the air valve we make to use with our air This pictures the duel door closer cylinders
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationNEC Display Solutions of America, Inc.
NEC Display Solutions of merica, Inc. Installation and ssembly Manual: Custom Ceiling Mount for NP-M332XS, NP-M352WS, NP-M282X, NP-M283X, NP-M322X, NP-M323X, NP-M322W, NP-M323W, NP- M363X, NP-M363W, NP-M402X,
More informationF84S Design Features F85S
F84S Designed for "On Highway" size truck and bus diesel engines, such as Cummins, Detroit, CAT3400, Mercedes, Iveco, Hino, Mitsubishi, John Deere, etc. F85S Designed for Dual Workstations for Production
More informationHAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop
More informationSection Q-3: Bessey Clamps. Section Q-3: Bessey Clamps. Bessey Clamps. Last Updated: 07/02/10
Section Q-3: Bessey Clamps Section Q-3: Last Updated: 07/02/10 Section Q-3: K Body Parallel Clamps Series Maverick Hardware Large parallel jaw surfaces made from non-marring polyamide Internal steel frame
More informationMantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before
More informationIndustrial Solutions & Innovation, LLC. Watts Specialties
Watts Specialties Improving Your Pipe Capabilities For Over 30 Years www.watts-specialties.com 24 & 36 Computerized Cutter Specifications W-242 W-244 W-362 W-364 Number of computer drive axis Number of
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationHeavy Equipment Solutions
Heavy Equipment Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and
More informationNEC Display Solutions of America, Inc.
NEC Display Solutions of merica, Inc. Installation and ssembly Manual: Custom Ceiling Mount for NEC NP400, NP500, NP500W, and NP600 Projectors Model: NP600CM Maximum Load Capacity: 50 lb (22.7 kg) Features:
More information.84M Ku-Band Rx/O Antenna System
4096-644 Revision A May 9, 2003 ASSEMBLY MANUAL.84M Ku-Band Rx/O Antenna System PRODELIN CORPORATION 1500 PRODELIN DRIVE NEWTON, NC 28658 .84M Ku-Band Rx/O Antenna System A ORIGINAL RELEASE 5/9/2003 A.Hahn
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More information