Assembly Instructions for Java Furniture: JFV65 & JFV75

Transcription

1 Assemly Instrutions for Java Furniture: JFV65 & JFV75 Thank you for Choosing the Java Furniture Line from Sanus Systems. If you have any questions regarding this or any other Sanus Systems produt, please ontat us at or visit us at Our ustomer servie representatives an assist you quikly with any issues regarding assemly or missing parts. Chek arefully to make sure none of the parts are missing or defetive. Never use defetive parts. Replaement parts for produts purhased from an authorized dealer will e shipped diretly to you. Please all Sanus Systems efore returning produts to retail stores. Required Tools: Phillips Srew Driver Note: Chek arefully to make sure you have all the hardware listed elow. Hardware: Hardware shown at atual size. (18) Cam - a (18) Cam Pin - (26) Dowel - (4) Barrel Nut - d (4) Barrel Nut Bolt - e (8) M6 Bolt - f (8) Ruer Spaer - g (8) Aluminum Spaer - h (12) Shelf Pin - i (12) Shelf Pin Srew - j (8) Door Protetors - k (8) Base Bolt - l (10) Carpet Glide - m (1) Allen Key - n Sanus Systems 2221 Hwy 36 West, Saint Paul, MN ( ) Customer Servie: See omplementary Sanus produts at

2 (1) Top - o (1) Bottom - p (1) Right Inside Panel - q (1) Left Inside Panel - r (1) Right Outside Panel - s (1) Left Outside Panel - t (2) Side Shelf - u (1) Middle Shelf - v (2) Front Base Rail - w (2) Side Base Rail - x (2) Leg - y (2) Door - z (3) Bak Panel - aa

3 Step 1: Prepare the Top Plae the Top (o) upside down on a soft surfae to lessen the hane of srathing. Insert 8 Cam Pins () and 8 Dowels () into the Top as seen in Diagram 1. Proeed to tighten eah Cam Pin with a Phillips srew driver. Next, orient the Barrel Nut (d) so the hole in its side faes the hole in the ak of the Top. Proeed to insert eah Barrel Nut into the hole as shown in the of Diagram 1. Then thread eah Barrel Nut Bolt (e) into the hole on the ak of the Top, as pitured in the of Diagram 1. Tighten eah Barrel Nut Bolt so they protrude a 1/4 from the Top. d Diagram 1 e o Step 2: Add Outside Panels Plae eah Cam (a) into eah Outside Panel (s,t) as shown in Diagram 2. Make sure the arrow on the Cam is pointing toward the hole on the outside as shown in A. Plae eah Outside Panel on the Top (o), make sure Dowels () and Cam Pins () align with the orret holes. The Channel on the ak of the Top should e lined up with the Channel in the Outside Panel. Proeed to tighten the Cams on eah Outside Panel in a lokwise motion. Diagram 2 a hannel o hannel Note: Cams should e tightened in a lokwise motion

4 Step 3: Add Inside Panels Insert eah Cam (a) into eah Inside Panel (q,r) in the same manner as you did in Step 2. Plae the Inside Panel so that it fits over the Dowels () and Cam Pins () as shown in the of Diagram 3. Make sure the Inside Panels do not lok the Channel. The Cams on the Inside Panel should e faing the Outside Panels. Tighten eah Cam on oth Inside Panels. r Diagram 3 o a Note: Cams should e tightened in a lokwise motion Step 4: Add Dowels Insert 8 Dowels () into the top of Panels (q,r,s,t) as shown in the of Diagram 4. Make sure they are inserted into the holes losest to the enter. Diagram 4 t s q r t

5 Step 5: Add Barrel Nut and Bolt Plae the Bottom (p), with trak and hannel faing up on a soft surfae, whih will help prevent srathing. Next, orient the Barrel Nut (d) so the hole in its side faes the hole in the ak of the Top. Proeed to insert the Barrel Nut into the hole as shown in the Detail View of Diagram 5. Then thread the Barrel Nut Bolt (e) into the hole on the ak of the Bottom, as pitured in Diagram 5. Tighten eah Barrel Nut Bolt so that they protrude a 1/4 From the Top. d hannel Diagram 5 e p trak Step 6: Add Bottom Flip the Bottom (p) so the trak and hannel are faing down. Align the ottom piee so it is resting on the Panels (q,r,s,t) with the 4 large holes toward the ak as shown in Diagram 6. Insert a Base Bolt (l) through the Bottom and into the appropriate hole in the Panel. See the of Diagram 6 for assistane. Diagram 6 l p

6 Step 7: Prepare Bottom Insert 6 Cam Pins () and 6 Dowels () into the Bottom (p) as shown in the of Diagram 7. Tighten all Cam Pins with a Phillips srew driver until they are tight. Diagram 7 p Step 8: Assemle Base Insert 4 Cam Pins (), 4 Dowels (), and 10 Cams (a) as shown in Diagram 8. Tighten Cam Pins with a Phillips srew driver. Then, attah the Front Base Rails (w) to the Side Base Rails (x). Proeed to tighten the 4 Cams on the Side Rails. One assemled, the rails should form a solid retangle. Diagram 8 x w a Note: Cams should e tightened in a lokwise motion

7 Step 9: Add Base Assemly to Bottom Flip and align the assemled ase frame so the holes in the assemled ase frame line up with the Dowels () and Cam Pins () on the Bottom (p). Proeed to tighten all 6 of the Cams (a) on the Front Base Rails (w) that orrespond with the Cam Pins on the Bottom so that the assemled ase frame is seured to the Bottom. Diagram 9 a w p Note: Cams should e tightened in a lokwise motion Step 10: Add Legs To add the Legs (y) first slide the Ruer Spaer (g) so it fits into the Aluminum Spaer (h). Then take a M6 Bolt (f) and insert it through the Outside Panel (s,t), the Spaer Assemly and finally thread it into the Leg. See the of Diagram 10 for assistane. Repeat this proess for the remaining holes on the left and right leg. Tighten eah M6 Bolt with the Allen Key (n) until tight. y g h Diagram 10 s f

8 Step 11: Add Carpet Glides Gently tap a Carpet Glide (m) into eah Leg (y), and into the loations shown in the Front Base Rails (w) and Side Base Rails (x). See the of Diagram 11 for assistane. m y Diagram 11 w m x Step 12: Add Shelves Thread the Shelf Pin Srews (j) through the Shelf Pin (i) and into the panel as shown in the of Diagram 12. Tighten Shelf Pin Srews with a Phillips srew driver. Repeat the proess until all 12 of the shelf pins are in plae. Plae Shelves (u,v) in ainet so they will fit on top of the Shelf Pins. Press down on Shelf firmly until it loks into plae. Note: The onnetors on the Side Shelves (u) are loser to the front and ak of the shelf than they are on the Middle Shelf (v). The two idential Shelves are the Outside Shelves. t Diagram 12 i j

9 Step 13: Add Bak Panels Insert the Bak Panel (aa) y lifting it up into the upper hannel, and setting it down into the lower hannel as shown in Diagram 13. After inserting the first Bak Panel, slide it all the way to the left. After inserting the seond Bak Panel slide it all the way to the right. Then, insert the last Bak Panel into the middle slot. Note: The last Bak Panel that is inserted should go in the middle. Insert the outer two first. Make sure the left and right Bak Panel slide into the hannel in the Outside Panels. Diagram 13 aa Step 14: Add Doors Add 2 Door Protetors (k) to eah side of the door as shown in the detailed View of Diagram 14. Hold the Door (z) so the smooth side of the glass is faing out. Then, insert the Door so that the pegs on the top of the door are inserted into the Channel in the Top (o) and the ottom wheels fit on the Trak on the Bottom (p) as shown in Diagram 14. The doors should slide easily on the trak. Diagram 14 k z trak Note: If Doors (z) do not slide easily, make sure wheels are sitting properly on the trak. Sanus Systems 2221 Hwy 36 West, Saint Paul, MN ( ) Customer Servie: See omplementary Sanus produts at