CNC Operator Turning- CSC/Q0115 (Capital Goods)
|
|
- Bertha Harper
- 6 years ago
- Views:
Transcription
1 - ( ) 1. Minimum qualification for Trainers Sector QP code Job Role / Trade Minimum qualification of Trainers Diploma B.E. B.Tech Minimum Remarks/ Brief Description of the Desired Trainer Profile years of experience 4 Minimum - Diploma/Degree in Mechanical Engineering/Crafts Instructor Training in related Occupation/Job role. Minimum to 4 years of Minimum - Diploma/Degree in Mechanical Engineering/Crafts Instructor Training in related Occupation/Job role. Minimum to 4 years of Minimum - Diploma/Degree in Mechanical Engineering/Crafts Instructor Training in related Occupation/Job role. Minimum to 4 years of SUNAINA SAMRIDDHI FOUNDATION Page 1
2 - ( ) 2. Minimum required Class room & Lab Size ( in sqft) Sector QP code Job roles/ Trade NSQF level Job role type Manufactur ing Lab Size Remark exception Class room Size Our requirement is based on lab, tools & Equipment ( Not on Square feet area ) No Specific criteria. Minimum Qualification of Trainees 10 th 4. Prescribed Duration of the training & common norms category Theory Practi cal Additional Duration: Entreprene urship and Softskills Additional Duration: Digital Literacy - Not to be counted in total hours - trainee will undergo this on his/her own via online - available in English and Regional Languages at indiaskilsonline.com Training Duration (excluding Digital Literacy) Cont ent Avail able Comm on Norms Catego ry Classification A: Regular Class& lab C: High Capex Training involving Hi capex Manufa cturing / Service yes I A NA Manufa cturing al / Non- al al Industry visit/ojt - Not applicable (NA) 16 SUNAINA SAMRIDDHI FOUNDATION Page 2
3 - ( ) 5. Tools & Equipment required in Lab SSC QPCode Name of the QP NSQF Level Equipment Name Minimum number of Equipment required (per batch of 0 trainees) Unit Type Is this a mandatory Equipment to be available at the Training Center (Yes/No) Dimension/Specification/D escription of the Equipment/ ANY OTHER REMARK Manual Lifter 1 pieces No Projector and screen 1 pieces No Simulator 1 pieces No Integrated CNC skill development software for operators Cnc Lathe (Small size industrial CNC lathe) 1 pieces Yes No. of tool stations: minimum 6 Spindle power:.7kw (continuous rating), 2-Axis. One machine in case of avaialability of simulator else minimum two machines. Cutting Tools 12 pieces Yes Three each of Boring holder insert, Threading holder insert, Grooving holder insert, Centre drill SUNAINA SAMRIDDHI FOUNDATION Page
4 - ( ) Steel Rule 0 Cm Graduated Both In English & Metric Units 10 pieces Yes Micrometre (Outside / Inside/Depth) 10 pieces Yes Vernier Caliper 10 pieces Yes digital, dial; length, depth; protractors Height Gauge 2 pieces Yes Gauges 10 pieces Yes slip, bore/hole, thread, plug, radius/profile surface plate 5 pieces Yes Printer 1 pieces Yes plotter Safety Glasses 0 pieces Yes Safety goggles Grinding Helmet 5 pieces Yes Grinding Helmet Apron 5 pieces Yes Apron safety shoes/covered shoes 0 pieces Yes safety shoes ear plug 0 pieces Yes ear plug Industry hand gloves 0 pieces Yes Industry hand gloves SUNAINA SAMRIDDHI FOUNDATION Page 4
5 - ( ) Face Mask/Mouth mask 0 pieces Yes mouth mask Centre Punch 15 pieces Yes Hammer 10 pieces Yes ball peen, mallet Combination Plier 5 pieces Yes 150 mm Surface Plate 2 pieces Yes Surface Plate 400 mm x 400 mm grade First Aid Kit 1 pieces Yes Vice Mounted Tables 1 pieces Yes Vice Mounted Tables Caliper 6 pieces Yes Outside Caliper and Inside Caliper Number Punch 1 sets Yes Scrap Box 2 boxes Yes Generator Set 1 pieces Yes load of all machines must take at a time (*Tool / Equipment marked not mandatory are optional SUNAINA SAMRIDDHI FOUNDATION Page 5
Fitter Mechanical Assembly- CSC/Q0304 (Capital Goods)
- ( ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationFitter Fabrication- CSC/Q0303 (Capital Goods)
1. Minimum qualification for Trainers - ( ) Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationFitter Mechanical- Life Sciences-LFS/Q0213 (Life Sciences)
Mechanical- s- (s) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Mechanical- s Mechanical- s Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required
More informationCast and diamonds-set jewellery - CAD Operator-G&J/Q2303 (Gems and Jewellery)
Cast and diamonds-set jewellery - CAD Operator- (Gems and ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In
More informationFitter Mechanical- Life Sciences-LFS/Q0213 (Life Sciences)
Fitter -LFS/Q0213 (Life ) 1. Minimum qualification for Trainers Sector Job Role / Trade Life Science Fitter Mechanical- Life QP code Minimum qualification of Trainers Minimum years of experience LFS/Q0213
More informationCast and diamonds-set jewellery - Hand Sketch Designer (Basic)-G&J/Q2301 (Gems and Jewellery)
Cast and diamonds-set jewellery - - (Gems and ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required
More informationJam Jelly & Ketchup Processing Technician-FIC/Q0103 (Food Processing)
- ( ) 1. Minimum qualification for Trainers Sector Job Role / Trade QP code Minimum qualification Minimum years of experience Remarks/ Brief Description of the Desired Trainer Profile of Trainers B.Sc.
More informationSewing Machine Operator - knits- AMH/Q0305 (Apparel)
- (Apparel) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationJam Jelly & Ketchup Processing Technician-FIC/Q0103 (Food Processing)
- ( ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationSelf Employed Tailor - AMH/Q1947- (Apparel)
1. Minimum qualification for Trainers - - (Apparel) Sector QP code Job Role / Trade Minimum qualification of Trainers Minimum years of experience Remarks/ Brief Description of the Desired Trainer Profile
More informationModel Curriculum. Lathe Operator SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE NON FORMAL AUTO COMPONENTS/AGGREGAT ASC/Q1901, V1.
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE NON FORMAL AUTO COMPONENTS/AGGREGAT ASC/Q1901, V1.0 4 TES REPAIR TABLE OF CONTENTS 1. Curriculum 2. Trainer Prerequisites
More informationOPERATOR CONVENTIONAL TURNING
Model Curriculum OPERATOR CONVENTIONAL TURNING Operator-Conventional Turning SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Tools Dies and Press tools Plastics Manufacturing
More informationModel Curriculum CNC OPERATOR TURNING SECTOR: SUB-SECTOR:
Model Curriculum CNC OPERATOR TURNING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS DIES, MOULDS AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationModel Curriculum. Machining Technician/CNC Operator L4 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Machining Technician/CNC Operator L4 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE MANUFACTURING MACHINING ASC/Q3503 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More informationModel Curriculum. Grinder-Hand and hand held Power Tools SECTOR: SUB-SECTOR:
Model Curriculum Grinder-Hand and hand held Power Tools Grinder-Hand and hand held Power Tools SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Dies, Moulds and Press Tools
More informationFitter-Mechanical Assembly
Model Curriculum Fitter-Mechanical Assembly Fitter-Mechanical Assembly SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Tools Dies and Press tools Plastics Manufacturing Machinery
More informationLABORATORY MANUAL W-SHOP TECHNOLOGY LAB ME-105-F
LABORATORY MANUAL W-SHOP TECHNOLOGY LAB ME-105-F ME-105F : WORKSHOP TECHNOLOGY MAHARISHI DAYANAND UNIVERSITY ROHTAK SYLLABUS B.TECH. FIRST YEAR LIST OF EXPERIMENTS S.No. NAME OF EXPERIMENTS PAGE No. FROM
More informationMACHINIST (3 Month Course) Revised May, 2009
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,
More informationSample Test Project. District / Zonal Skill Competitions. Skill- CNC Turning. Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- CNC Turning Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- CNC Turning 1 Table of Contents A. Preface... 3 B.
More informationAPPRENTICESHIP CURRICULUM FOR LASTING OPERATOR. Program
APPRENTICESHIP CURRICULUM FOR LASTING OPERATOR Program SECTOR: Leather BLOCK I (Basic Training): COURSE NAME: Lasting Operator QP Name, QP and Version No., and NSQF Level: Lasting Operator, LSS/Q2701 V1.0,
More informationModel Curriculum. Fitter-Fabrication SECTOR: SUB-SECTOR:
Model Curriculum Fitter-Fabrication SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS DIES, MOULDS AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationModel Curriculum. Fitter-Mechanical Assembly
Model Curriculum Fitter-Mechanical Assembly SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS TOOLS DIES AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationDraughtsman-Mechanical
Model Curriculum Draughtsman-Mechanical Draughtsman-Mechanical SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Dies,Moulds and Press tools Plastics Manufacturing Machinery
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationPreparing and using CNC Machining Centres F/508/4727
Unit Title Ofqual unit reference number (code) Organisation Reference Preparing and using CNC Machining Centres F/508/4727 QU051501 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationCourse Name. List of Experiments/Exercises:
Course code Course Name L-T-P- Credits Year of Introduction ME334 MANUFACTURING TECHNOLOGY LABORATORY II Prerequisite: ME3 Metrology and Instrumentation 0-0-3-06 Course Objectives: To provide programming
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationPRODUCTION & MANUFACTURING
REDESIGNED MODULES FOR THE SECTOR OF PRODUCTION & MANUFACTURING UNDER MODULAR EMPLOYABLE SKILLS (MES) Revised in 2014 By Ministry of Labour & Employment Directorate General of Employment & Training 1 GENERAL
More informationSEMPEO SQA Unit Code FP2J 04 Preparing and using CNC turning machines
Overview This standard covers a broad range of basic computer numerical control (CNC) turning competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression
More informationTECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR FOR MACHINIST (6 Months Course) Revised May, 009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96H, GULBERGII, LAHORE
More informationMODEL CURRICULUM. Jewellery Frame Maker GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0610, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0610, V1.0 4 TABLE OF CONTENTS 1. Curriculum 01
More informationModel Curriculum. Fitter-Electrical and Electronic Assembly SECTOR: SUB-SECTOR:
Model Curriculum Fitter-Electrical and Electronic Assembly Fitter-Electrical and Electronic Assembly SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Plastics Manufacturing
More informationEvaluation Instructions Machining Level II Milling: Precision Locations
Evaluation Instructions Machining Level II Milling: Precision Locations General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the
More informationGeneral Machining, Fitting and Assembly Applications A/508/5164
Unit Title Ofqual unit reference number (code) Organisation Reference General Machining, Fitting and Assembly Applications A/508/5164 QU051773 Unit Level Level 2 Unit Sub Level None GLH 55 Unit Credit
More informationPreparing and using CNC milling machines
Unit 016 Preparing and using CNC milling machines Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
More informationName: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
More informationMODEL CURRICULUM. Jewellery Component Maker GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0608, V1.
MODEL CURRICULUM Jewellery Component Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0608, V1.0 3 Jewellery
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationModel Curriculum. Assistant Shuttering Carpenter (NSQF Level 2) SECTOR: SUB-SECTOR:
Model Curriculum Assistant Shuttering Carpenter (NSQF Level 2) SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CONSTRUCTION REAL ESTATE AND INFRASTRUCTURE CONSTRUCTION SHUTTERING CARPENTER CON/Q0302,
More informationSafety Hazards Material Processing Laboratory Room 232
Safety Hazards Material Processing Laboratory Room 232 HAZARD: Rotating Equipment / Machine Tools Be aware of pinch points and possible entanglement Personal Protective Equipment: Safety Goggles; Standing
More informationSample Test Project. District / Zonal Skill Competitions. Skill- CNC Milling. Category: Manufacturing & Engineering Technology
Sample Test Project District / Zonal Skill Competitions Skill- CNC Milling Category: Manufacturing & Engineering Technology Version 1 Dec 2017 Skill- CNC Milling 1 Table of Contents A. Preface... 3 B.
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.0 3 TABLE OF CONTENTS Curriculum Trainer Prerequisites 01 05 3. Annexure:
More informationSTATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
More informationProducing components using hand fitting techniques
Unit 005 Producing components using hand fitting techniques Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required
More informationMODEL CURRICULUM. Stone Fixer- Imitation Jewellery SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL
MODEL CURRICULUM Stone Fixer- Imitation Jewellery SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEMS & JEWELLERY IMITATION JEWELLERY STONE FIXING G&J/Q1504, V1.0 3 TABLE OF CONTENTS Curriculum Trainer
More informationEvaluation Instructions Machining Level II CNC Milling
Evaluation Instructions Machining Level II CNC Milling General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the criteria for performance
More informationManufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
More informationRegulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title Preparing and Using Lathes for Turning Operations Regulator unit R/616/7332 code SQA unit code FT2P 60 SSC ref Unit 76 History of changes
More informationShuttering Carpenter
Lab Specifications Shuttering Carpenter An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the development
More informationPreparing and using lathes for turning operations
Unit 011 Preparing and using lathes for turning Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationCredit Value 10 QCF Level 3 GLH 75. Learner pack
QETA/047 Advanced turning Credit Value 10 QCF Level 3 GLH 75 Unit purpose/aims Learner pack This unit enables you to acquire the essential background knowledge relating to advanced centre lathe turning
More informationOur clients success is our genuine concern
Our clients success is our genuine concern Overview M/S SEINEN is an associate company of Dawood Engineering. It was established in Year 2006, with an aim to provide customers with comprehensive engineering
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationPreparing and using CNC machining centres
Unit 017 Preparing and using CNC machining centres Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationModule-2 Lecture-1 Angle plate, steel rule, spring calipers. (Refer Slide Time: 00:14)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-2 Lecture-1 Angle plate, steel rule, spring
More informationGeneral machining, fitting and assembly applications
Unit 065 General machining, fitting and assembly Level: 2 Credit value: 12 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationSEMPEO SQA Unit Code FP27 04 Producing components using hand fitting techniques
Producing components using hand fitting techniques Overview This standard covers a broad range of basic hand fitting competences that will prepare you for entry into the engineering or manufacturing sectors,
More informationModel Curriculum. 1. Assistant Facade Installer
Model Curriculum 1. SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction Interior & Exterior Finishes CON/Q1104, V1.0 2 TABLE OF CONTENTS 1. Curriculum
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationPreparing and Using Grinding Machines. Ofqual unit reference number (code) Organisation Reference F/508/4694. Unit Level Level 2.
Unit Title Ofqual unit reference number (code) Organisation Reference Preparing and Using Grinding Machines F/508/4694 QU051493 Unit Level Level 2 Unit Sub Level None GLH 68 Unit Credit Value 15 Sector
More informationCNC Lathe Production Technician
Brief Program Description The CNC Lathe Production Technician program is a 9 week online program designed to help students gain the skills and knowledge required for work as entry-level CNC lathe production
More informationMECH 311. Manufacturing Processes Laboratory Manual. Concordia University Fall Course Instructors: Dr. Packirisamy Dr.
MECH 311 Manufacturing Processes Laboratory Manual Concordia University Fall 2014 Course Instructors: Dr. Packirisamy Dr. Cheung Lab Instructor: Michael Rembacz Table of Contents MECH 311 Manufacturing
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationSTATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF DRAFT SYLLABUS
STATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF 2017 - DRAFT SYLLABUS Subject :GENERAL MACHINIST - Theory Class : XI TOPIC CONTENT 1. Workshop Engineering Introduction; Machinist; Duties; Role
More informationCurriculum Machinist with Green Skills. (Cooperative Vocational Training-CVT)
National Vocational & Technical Training Commission (NAVTTC) Curriculum for Machinist with Green Skills (Cooperative Vocational Training-CVT) December, 2015 Curriculum Machinist with Green Skills NVQF
More informationModel Curriculum. 1. ShutteriŶg CarpeŶter- Systeŵ. Construction Real Estate and Infrastructure Construction SHUTTERING CARPENTRY CON/Q0304, V1.
Model Curriculum 1. ShutteriŶg CarpeŶter- Systeŵ SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction SHUTTERING CARPENTRY CON/Q0304, V1.0 4 1 2
More informationFACILITIES LIST 2014
95D MAINLINE DRIVE P.O. BOX 428 WESTFIELD, MA 01086 PHONE 413-562-0052 FAX 413-568-7902 info@preciseturning.com www.preciseturning.com FACILITIES LIST 2014 TURNING: MILLING: KIA SKT 21B CNC TURNING CENTER
More informationPromotion of TVET Viet Nam. Vietnamese-German Development Cooperation. Mechatronics MODULES
Promotion of TVET Viet Nam Vietnamese-German Development Cooperation Mechatronics MODULES Promotion of TVET Viet Nam Promotion Mechatronics of TVET Viet Nam Vietnamese-German Development Cooperation Module
More informationPreparing and using milling machines. Outcome one
006 UNIT 012 Preparing and using milling machines Learning outcomes 1 2 Know how to prepare and use milling machines Performance evidence must be the main form of evidence gathered. Candidates are required
More informationFence Wire Bender. Description: Tools: Materials: Procedure: Notes: Name: Date:
Fence Wire Bender Name: Date: Description: Small tool used to bend wire around another piece of wire for a fence. Processes used to build a wire bender are drilling, cutting and bending. Practices hot
More informationWorldSkills - Infrastructure Lists. Berufsweltmeisterschaft Calgary - Canada 1. Sep- 6. Sep 2009
Page 1 of 10 WorldSkills Competition Berufsweltmeisterschaft 1. Sep- 6. 06 INFRASTRUCTURE CNC LIST Turning Concours Mondial des Metiers CNC CNC TournageDrehen Position: Contact: Details: Email: Phone:
More informationSkills Canada National Competition. Contest Description. 43- Sheet Metal Work / Post-Secondary May 27-30, Saskatoon
Skills Canada National Competition Contest Description 43- Sheet Metal Work / Post-Secondary May 27-30, 2015 - Saskatoon 1. The Importance of Essential Skills for Careers in the Skilled Trades and Technology
More informationPrecision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.
PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationMeasuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
More informationModel Curriculum. 1. Helper Shuttering carpenter. Construction Real Estate and Infrastructure Construction Shuttering Carpentry CON/Q0301, V1.
Model Curriculum 1. Helper Shuttering carpenter SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction Shuttering Carpentry CON/Q0301, V1.1 1 TABLE
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR:
MODEL CURRICULUM Tarakasi Jeweller SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY Handmade Gold and Gems-Set Jewellery, Silversmithing Component making/filing/assembling G&J/Q9202,
More informationLINEAR MEASUREMENT. Prof.H M Prajapati & Prof. A R Sankhla
LINEAR MEASUREMENT Introduction Classification Based on the type of standard Line measurement End measurement Based on precision Precise Direct: Vernier caliper, Micrometer Indirect: Telescopic gauge,
More informationModel Curriculum. Engraving Artisan
Model Curriculum SECTOR: HANDICRAFTS AND CARPET SUB-SECTOR: Handicrafts (Bamboo Handicrafts) OCCUPATION: REF ID: HCS/Q 2902, V1.0 NSQF LEVEL: 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More informationThe National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The
More informationPage 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
More informationINTRODUCTION. A space, room or building in which goods are manufactured or repaired is know as workshop.
INTRODUCTION A space, room or building in which goods are manufactured or repaired is know as workshop. A workshop may also be defined as a room or building which provides both the area and tools (or machinery
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationPreparing and using milling machines
Unit 012 Preparing and using milling machines Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a broad
More informationPerfect in precision. F1200 No D6000 No , , , , basic equipment includes: basic equipment includes:
Perfect in precision tool holder ISO30 work table 450 x 180 mm F1200 No. 11905 2,249.00 3,309.39 longitudial travel X-axis 260 mm transverse travel Y-axis 150 mm 1.4 kw, 140-3000 RPM main spindle bore
More informationHand Tools MEC072 SAMPLE
Module Resource Manual SECOND EDITION Hand Tools MEC072 This second edition published in December 2002 by Manufacturing and Engineering Division Southern Sydney Institute, NSW TAFE Commission PO Box 218
More informationCOURSE SYLLABUS. Course Title: Manufacturing Machinery Lathe II. Date submitted: Department: Business and Technology. Curriculum: Technology Studies
COURSE SYLLABUS Course Title: Manufacturing Machinery Lathe II Department: Business and Technology Curriculum: Technology Studies Date submitted: 9/26/14 (AAC: 14-117) Course Descriptors: Make certain
More informationEvaluation Instructions Machining Level II CNC Turning
Evaluation Instructions Machining Level II CNC Turning General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the criteria for performance
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationTM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout
TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout Ex GST Inc GST $23,900.00 $27,485.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres
More informationUNIT 9 TOOLS FOR BASIC LAYOUT
UNIT 9 TOOLS FOR BASIC LAYOUT Tools for Basic Structure 9.1 Introduction Objectives 9.2 Tools for Scribing 9.3 Accessories 9.4 Summary 9.5 Key Words 9.1 INTRODUCTION The process of making reference mark
More informationModel Curriculum. Carpenter Wooden Furniture FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4
Model Curriculum Carpenter Wooden Furniture SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4 TABLE OF CONTENTS 1. Curriculum
More informationMACHINES SPECS
MACHINES SPECS 2018-2019 2 CNC Tube Laser Machine Detail Sheet CNC Tube Laser Cutting Trumpf Model: TruLaser Tube 5000 Table Travel : 6500mm Operation : Tube cutting Unit : 1 Max. work piece weight : 20
More informationPrecision Measurement
Precision Measurement Engineering Principles Student Journal Published by ENERGY CONCEPTS, INC. 27201J I COPYRIGHT 2009 BY ENERGY CONCEPTS, INC. All rights reserved. No part of this publication may be
More informationModule-2 Lecture-2 Combination set, Vernier calipers. (Refer Slide Time: 00:16)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-2 Lecture-2 Combination set, Vernier calipers
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR (Trading as Opus Metrology) ccredited to 15 Maylan Road Earlstrees Industrial Estate
More information