MODEL CURRICULUM SECTOR: SUB-SECTOR:
|
|
- Kathryn White
- 5 years ago
- Views:
Transcription
1 MODEL CURRICULUM Tarakasi Jeweller SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY Handmade Gold and Gems-Set Jewellery, Silversmithing Component making/filing/assembling G&J/Q9202, V1.0 5 Tarakasi Jeweller
2 Tarakasi Jeweller
3 TABLE OF CONTENTS. Curriculum Trainer Prerequisites Annexure: Assessment Criteria 05 Tarakasi Jeweller
4 Tarakasi Jeweller CURRICULUM / SYLLABUS This program is aimed at training candidates for the job of a Tarakasi Jeweller, in the Gem & Jewellery Sector/Industry and aims at building the following key competencies amongst the learner Program Name Qualification Pack Name & Reference ID. Tarakasi Jeweller G&J/Q9202, v1.0 Version No. 1.0 Version Update Date Pre-requisites to Training Training Outcomes Basic Literacy After completing this programme, participants will be able to: Assemble and solder precious metal wire/strips: make, assemble and solder strips or wires of precious metal to make final Tarakasi jewellery Coordinate with others: coordinate effectively with the team members and clients for timely completion of work Maintain health and safety at workplace: maintain good health and follow safety measures/rules at workplace Tarakasi Jeweller 1
5 This course encompasses 3 out of 3 National Occupational Standards (NOS) of Tarakasi Jeweller Qualification Pack issued by Gem & Jewellery Skill Council of India. Sr. No. Module 1 Assemble and solder precious metal wire/ strips Theory Duration (hh:mm) 30:00 Practical Duration (hh:mm) 165:00 Corresponding NOS Code G&J/N9202 Key Learning Outcomes Ensure that wires/sheets are properly annealed, cleaned and dried before starting assembly Ensure the thickness and diameter of sheet or wire as per design required Understand to bend and twist the strips or wires with the help of pliers, tweezers and fingers to make outer frame and various design components Understand to dip the assembled frame in borax, water mixture, sprinkle solder powder and solder frame assembly with torch flame Understand to assemble various design components inside the frame as per sketch and follow same procedure of soldering and cleaning Compare the design, shape and flow with the original sketch at intermediate steps and after complete soldering Equipment Required Mandatory White Board/Black Board Marker/ Chalk, Duster, Notepads, Pens, Pencils, Blank Sheets Wooden table/bench Pilers Tweezers Strainer (Galni) Flame Torch Sulphuric Acid Hotplate Copper wire Wooden stick Lighter Flux/ Borax Powder Protective Safety Hand Gloves Fire Extinguisher Safety Shoes First aid kit Protective eyewear Safety Mask 2 Coordinate with others: Theory Duration (hh:mm) 01:00 Practical Duration (hh:mm) 02:00 Corresponding NOS Code G&J/N9901 Coordinate with supervisor to understand the work output requirements Communicate with supervisor about company policies and rules Coordinate with supervisor timely delivery of work and report any anticipated delays Coordinate with colleagues as a team to achieve team goals Resolve conflicts by communicating with colleagues and other departments Understand to multi-task relevant activities Optional Computer or Laptop Attached to LCD Projector Mandatory White Board/Black Board Marker/ Chalk, Duster Notepads, Pens, Pencils, Blank Sheets Optional Computer or Laptop Attached to LCD Projector 3 Maintain health and safety at workplace: Report about potential sources of danger Understand to use of precautionary Mandatory Safety Hand Gloves, Mask, Safety Shoes, Fire Tarakasi Jeweller 2
6 Sr. No. Module Theory Duration (hh:mm) 01:00 Practical Duration (hh:mm) 01:00 Key Learning Outcomes methods and fire extinguisher in case of fire Understand to use of first aid procedure in case of emergencies Understand to use and wear recommended safety gears as per company policies Equipment Required Extinguisher, First Aid Kit Optional Computer or Laptop Attached to LCD Projector Corresponding NOS Code G&J/N9902 Total Duration Theory Duration 32:00 Practical Duration 168:00 Unique Equipment Required: White Board/Black Board Marker/ Chalk, Duster, Notepads, Pens, Pencils, Blank Sheets, Wooden table/bench, Pilers, Tweezers, Strainer (Galni),Flame Torch, Sulphuric Acid, Hotplate, Copper wire, Wooden stick, Lighter,Flux/ Borax Powder, Protective Safety Hand Gloves,Fire Extinguisher, Safety Shoes First aid kit, Protective Eyewear, Safety mask. Optional Computer or Laptop Attached to LCD Projector Grand Total Course Duration: 200 Hours, 0 Minutes Recommended OJT Hours: 600 Hours, 0 Minutes (This syllabus/ curriculum has been approved by Gem & Jewellery Skill Council of India) Tarakasi Jeweller 3
7 Trainer Prerequisites for Job role: Tarakasi Jeweller mapped to Qualification Pack: G&J/Q9202, v1.0 Sr. No. Area Details 1 Job Description To deliver accredited training service, mapping to the curriculum detailed above, in accordance with the Qualification Pack G&J/Q9202, Version Personal Attributes Aptitude for conducting training, and pre/post work to ensure competent, employable candidates at the end of the training. Strong communication skills, interpersonal skills, ability to work as part of a team; a passion for quality and for developing others; well-organised and focused, eager to learn and keep oneself updated with the latest in the mentioned field. 3 Minimum Educational 10 th standard Qualifications 4a Domain Certification Certified for Job Role: Tarakasi Jeweller mapped to QP: G&J/Q9202, v1.0. Minimum accepted score as per SSC guidelines is 80% 4b Platform Certification Certified for the Job Role: Trainer, mapped to the Qualification Pack: MEP/Q0102. Minimum accepted score for the trainers is 80% 5 Experience The minimum experience required is 5years in QC/ trainer/ manager/ team leader/ supervisor. Tarakasi Jeweller 4
8 Annexure: Assessment Criteria Assessment Criteria Job Role Tarakasi Jeweller Qualification Pack G&J/Q9202, v1.0 Sector Skill Council Gem & Jewellery Skill Council of India Sr. No. Guidelines for Assessment 1 Criteria for assessment for each Qualification Pack will be created by the Sector Skill Council. Each Performance Criteria (PC) will be assigned marks proportional to its importance in NOS. SSC will also lay down proportion of marks for Theory and Skills Practical for each PC. 2 The assessment for the theory part will be based on knowledge bank of questions created by the SSC. 3 Assessment will be conducted for all compulsory NOS, and where applicable, on the selected elective/option NOS/set of NOS. 4 Individual assessment agencies will create unique question papers for theory part for each candidate at each examination/training centre (as per assessment criteria below). 5 Individual assessment agencies will create unique evaluations for skill practical for every student at each examination/training centre based on this criterion. 6 To pass the Qualification Pack, every trainee should score a minimum of 70% of aggregate marks to successfully clear the assessment. 7 In case of unsuccessful completion, the trainee may seek reassessment on the Qualification Pack. Tarakasi Jeweller 5
9 Total Marks: 90 Assessment outcomes Compulsory NOS Assessment Criteria for Total Marks outcomes Out Of Marks Allocation Theory Skills Practical 1. G&J/N9202 Assembel and solder precious metal wire/ strips PC1.check and ensure materials are available (i.e. precious metal strips or wires, solder powder, pliers, tweezers, cutters etc.,) as per the requirement of the jewellery pieces PC2. ensure that the precious metal strips or wires are annealed, cleaned and dried before assembly PC3. match the strips or wires to the sketch drawn on the paper and cut it to a desired length PC4. bend and twist the strips or wires with the help pliers, tweezers and fingers to make outer frame and various design components PC5. dip the assembled frame in borax, water mixture, sprinkle solder powder and solder frame assembly with torch flame PC6. pickle and clean frame with sulphuric acid, water and gentle rubbing with brass brush PC7. assemble various design components inside the frame as per sketch and follow same procedure of soldering and cleaning PC8. check soldered joints, compare the design, shape and flow with the original sketch at intermediate steps and after complete soldering PC9. maintain proper records of metal received Tarakasi Jeweller 6
10 Total Marks: 90 Assessment outcomes Assessment outcomes Compulsory NOS Criteria for Total Marks Out Of Marks Allocation Theory Skills Practical and returned prior and post assembly PC10. ensure that the target is achieved as per order Total Tarakasi Jeweller 7
11 Tarakasi Jeweller 8
12 Tarakasi Jeweller 9
MODEL CURRICULUM. Stone Fixer- Imitation Jewellery SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL
MODEL CURRICULUM Stone Fixer- Imitation Jewellery SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEMS & JEWELLERY IMITATION JEWELLERY STONE FIXING G&J/Q1504, V1.0 3 TABLE OF CONTENTS Curriculum Trainer
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.0 3 TABLE OF CONTENTS Curriculum Trainer Prerequisites 01 05 3. Annexure:
More informationModel Curriculum. Wax Setter (Basic) GEM & JEWELLERY CAST AND DIAMONDS -SET JEWELLERY WAX-SETTING G&J/Q2703, VERSION 1.0 3
Model Curriculum Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY CAST AND DIAMONDS -SET JEWELLERY WAX-SETTING G&J/Q2703, VERSION 1.0 3 TABLE OF CONTENTS 1. Curriculum
More informationModel Curriculum. Wax Setter (Basic) Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL:
Model Curriculum Wax Setter (Basic) Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: Gem & Jewellery Cast and diamonds -Set Jewellery Wax-Setting G&J/Q2703, Version 1.0 3 Format:
More informationMODEL CURRICULUM. Jewellery Frame Maker GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0610, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0610, V1.0 4 TABLE OF CONTENTS 1. Curriculum 01
More informationModel Curriculum. Irrigation Service Technician
Model Curriculum Irrigation Service Technician TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites 09 3. Annexure: Assessment Criteria 10 Irrigation Service Technician CURRICULUM / SYLLABUS This
More informationModel Curriculum. Hand Crochet Lace Maker HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3
Model Curriculum Hand Crochet Lace Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3 Hand Crochet Lace Maker
More informationMODEL CURRICULUM. Jewellery Component Maker GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0608, V1.
MODEL CURRICULUM Jewellery Component Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0608, V1.0 3 Jewellery
More informationModel Curriculum. Crochet Lace Tailor SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Crochet Lace Tailor HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE TAILOR HCS/Q7705, V1.0 3 Crochet Lace Tailor 1 SSC Logo
More informationModel Curriculum. Hand Soldering Technician Telecom Board SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Hand Soldering Technician Telecom Board SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: TELECOM HANDSET COMMUNICATION ELECTRONICS TEL/Q2500, V1.0 4 Hand Soldering Technician Telecom
More informationModel Curriculum. Draughtsman SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Model Curriculum Construction Real Estate and Infrastructure Construction Draughting CON/Q1301 4 2 TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites
More informationModel Curriculum. Carpenter Wooden Furniture FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4
Model Curriculum Carpenter Wooden Furniture SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4 TABLE OF CONTENTS 1. Curriculum
More informationModel Curriculum KNITING MACHINE OPERATOR - WARP KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: TEXTILE KNITTING KNITTING TSC/ Q4103 4
Model Curriculum KNITING MACHINE OPERATOR - WARP KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: TEXTILE KNITTING KNITTING TSC/ Q4103 4 Certificate CURRICULUM COMPLIANCE TO QUALIFICATION
More informationModel Curriculum KNITTING MACHINE OPERATOR CIRCULAR KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL:
Model Curriculum KNITTING MACHINE OPERATOR CIRCULAR KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: TEXTILE KNITTING KNITTING TSC/Q 4101, Version 1.0 4 Certificate CURRICULUM COMPLIANCE TO
More informationModel Curriculum. 1. Sewing Machine Operator- Knits APPAREL, MADE-UPS AND HOME FURNISHING APPAREL STITCHING AMH/Q0305 4
Model Curriculum 1. Sewing Machine Operator- Knits SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: APPAREL, MADE-UPS AND HOME FURNISHING APPAREL STITCHING AMH/Q0305 4 Certificate CURRICULUM COMPLIANCE
More informationModel Curriculum. Lathe Operator SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE NON FORMAL AUTO COMPONENTS/AGGREGAT ASC/Q1901, V1.
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE NON FORMAL AUTO COMPONENTS/AGGREGAT ASC/Q1901, V1.0 4 TES REPAIR TABLE OF CONTENTS 1. Curriculum 2. Trainer Prerequisites
More informationModel Curriculum. Engraving Artisan
Model Curriculum SECTOR: HANDICRAFTS AND CARPET SUB-SECTOR: Handicrafts (Bamboo Handicrafts) OCCUPATION: REF ID: HCS/Q 2902, V1.0 NSQF LEVEL: 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More informationDraughtsman-Mechanical
Model Curriculum Draughtsman-Mechanical Draughtsman-Mechanical SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Dies,Moulds and Press tools Plastics Manufacturing Machinery
More informationModel Curriculum. Ikkat Artisan
Model Curriculum Ikkat Artisan SECTOR : TEXTILE SUB-SECTOR: HANDLOOM OCCUPATION: DESIGNING, DYEING AND WEAVING REF ID : TSC/Q7404 Version 1.0 NSQF LEVEL : 4 Ikkat Artisan Certificate CURRICULUM COMPLIANCE
More informationOPERATOR CONVENTIONAL TURNING
Model Curriculum OPERATOR CONVENTIONAL TURNING Operator-Conventional Turning SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Tools Dies and Press tools Plastics Manufacturing
More informationQUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR GEMS & JEWELLERY INDUSTRY. SECTOR: GEMS & JEWELLERY SUB-SECTOR: Handmade gold and gems-set jewellery
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR GEMS & JEWELLERY INDUSTRY Contents What are Occupational Standards(OS)? OS describe what individuals need to do, know and understand in order to carry out
More informationModel Curriculum CNC OPERATOR TURNING SECTOR: SUB-SECTOR:
Model Curriculum CNC OPERATOR TURNING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS DIES, MOULDS AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationModel Curriculum. 1. Sewing Machine Operator- Knits APPAREL, MADE-UPS AND HOME FURNISHING APPAREL STITCHING AMH/Q0305 4
Model Curriculum 1. Sewing Machine Operator- Knits SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: APPAREL, MADE-UPS AND HOME FURNISHING APPAREL STITCHING AMH/Q0305 4 Certificate CURRICULUMCOMPLIANCETO
More informationModel Curriculum. 1. Jute Products Stitching Operator HANDICRAFTS AND CARPET HAND CRAFTED TEXTILES NATURAL FIBRE CRAFTS HCS/Q7403, V1.
Model Curriculum 1. Jute Products Stitching Operator SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: HANDICRAFTS AND CARPET HAND CRAFTED TEXTILES NATURAL FIBRE CRAFTS HCS/Q7403, V1.0 4 Jute Products
More informationModel Curriculum. Grinder-Hand and hand held Power Tools SECTOR: SUB-SECTOR:
Model Curriculum Grinder-Hand and hand held Power Tools Grinder-Hand and hand held Power Tools SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Dies, Moulds and Press Tools
More informationModel Curriculum. Fitter-Mechanical Assembly
Model Curriculum Fitter-Mechanical Assembly SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS TOOLS DIES AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationAPPRENTICESHIP CURRICULUM FOR LASTING OPERATOR. Program
APPRENTICESHIP CURRICULUM FOR LASTING OPERATOR Program SECTOR: Leather BLOCK I (Basic Training): COURSE NAME: Lasting Operator QP Name, QP and Version No., and NSQF Level: Lasting Operator, LSS/Q2701 V1.0,
More informationFitter-Mechanical Assembly
Model Curriculum Fitter-Mechanical Assembly Fitter-Mechanical Assembly SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Tools Dies and Press tools Plastics Manufacturing Machinery
More informationModel Curriculum. Specialized Sewing Machine Operator SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Specialized Sewing Machine Operator SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: APPAREL, MADE-UPS AND HOME FURNISHING APPAREL / MADE-UPS / HOME FURNISHING SPECIALIZED STITCHING
More informationModel Curriculum. 1. Assistant Facade Installer
Model Curriculum 1. SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction Interior & Exterior Finishes CON/Q1104, V1.0 2 TABLE OF CONTENTS 1. Curriculum
More informationCast and diamonds-set jewellery - CAD Operator-G&J/Q2303 (Gems and Jewellery)
Cast and diamonds-set jewellery - CAD Operator- (Gems and ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In
More informationCast and diamonds-set jewellery - Hand Sketch Designer (Basic)-G&J/Q2301 (Gems and Jewellery)
Cast and diamonds-set jewellery - - (Gems and ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required
More informationModel Curriculum. Hand Embroiderer APPAREL, MADE-UPS AND HOME FURNISHING APPAREL / MADE-UPS / HOME FURNISHING EMBROIDERY AMH/Q1001 4
Model Curriculum Hand Embroiderer SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: APPAREL, MADE-UPS AND HOME FURNISHING APPAREL / MADE-UPS / HOME FURNISHING EMBROIDERY AMH/Q1001 4 Certificate CURRICULUM
More informationModel Curriculum. Fitter-Electrical and Electronic Assembly SECTOR: SUB-SECTOR:
Model Curriculum Fitter-Electrical and Electronic Assembly Fitter-Electrical and Electronic Assembly SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Plastics Manufacturing
More informationModel Curriculum Assistant Carpenter-Wooden Furniture
Model Curriculum Assistant Carpenter-Wooden Furniture SECTOR: FURNITURE & FITTINGS SUB-SECTOR: Wooden Furniture OCCUPATION: Production- Wooden Furniture REF ID: FFS/Q0103, V1.0 NSQF LEVEL: 3 ii TABLE OF
More informationModel Curriculum. 1. Assistant Decorative Painter PAINTS AND COATINGS APPLICATION DECORATIVE APPLICATION PCS/Q5006, V1.0 3
Model Curriculum 1. Assistant Decorative Painter SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: PAINTS AND COATINGS APPLICATION DECORATIVE APPLICATION PCS/Q5006, V1.0 3 Assistant Decorative Painter
More informationModel Curriculum. Assistant Shuttering Carpenter (NSQF Level 2) SECTOR: SUB-SECTOR:
Model Curriculum Assistant Shuttering Carpenter (NSQF Level 2) SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CONSTRUCTION REAL ESTATE AND INFRASTRUCTURE CONSTRUCTION SHUTTERING CARPENTER CON/Q0302,
More informationModel Curriculum. Assistant Electrician (NSQF Level 3) SECTOR: SUB-SECTOR:
Model Curriculum Assistant Electrician (NSQF Level 3) SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CONSTRUCTION REAL ESTATE AND INFRASTRUCTURE CONSTRUCTION CONSTRUCTION ELECTRICAL WORKS CON/Q0602
More informationModel Curriculum Assembler Modular Furniture
Model Curriculum SECTOR : FURNITURE & FITTINGS SUB-SECTOR : Modular Furniture OCCUPATION : Production- Modular Furniture REF ID : FFS/Q5101, V1.0 NSQF LEVEL : 3 ii TABLE OF CONTENTS 1. Curriculum 01 2.
More informationQUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR GEMS & JEWELLERY INDUSTRY. SECTOR: GEMS & JEWELLERY SUB-SECTOR: Handmade gold and gems-set jewellery
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR GEMS & JEWELLERY INDUSTRY Contents What are Occupational Standards(OS)? OS describe what individuals need to do, know and understand in order to carry out
More informationModel Curriculum. Machining Technician/CNC Operator L4 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Machining Technician/CNC Operator L4 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE MANUFACTURING MACHINING ASC/Q3503 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More informationModel Curriculum. 1. ShutteriŶg CarpeŶter- Systeŵ. Construction Real Estate and Infrastructure Construction SHUTTERING CARPENTRY CON/Q0304, V1.
Model Curriculum 1. ShutteriŶg CarpeŶter- Systeŵ SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction SHUTTERING CARPENTRY CON/Q0304, V1.0 4 1 2
More informationModel Curriculum. 1. Hand Embroiderer SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: 1. APPAREL, MADE-UP S AND HOME FURNISHING Apparel / MADE-UP S / HOME FURNISHING EMBROIDERY AMH/Q1001 4 Certificate CURRICULUM COMPLIANCE
More informationQUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR GEMS & JEWELLERY INDUSTRY. SUB-SECTOR: Handmade gold and gems-set jewellery
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR GEMS & JEWELLERY INDUSTRY Contents What are Occupational Standards(OS)? OS describe what individuals need to do, know and understand in order to carry out
More informationModel Curriculum. Assistant Construction Painter & Decorator SECTOR: SUB-SECTOR:
Model Curriculum Assistant Construction Painter & Decorator SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CONSTRUCTION REAL ESTATE AND INFRASTRUCTURE CONSTRUCTION CONSTRUCTION PAINTING CON/Q0502,
More informationFinalized & Validated by Industrial Advisory Group (IAG) 13th December National Competency Standards. For SOMUK
Finalized & Validated by Industrial Advisory Group (IAG) 13th December 2013 National Competency Standards For SOMUK Page 1 Introduction The National Competency Standards are written specifications of skill
More informationModel Curriculum Lead Carpenter-Wooden Furniture (Option: Lock Installer)
Model Curriculum (Option: Lock Installer) SECTOR: Furniture & Fittings SUB-SECTOR: Wooden Furniture OCCUPATION: Production- Wooden Furniture REF ID: FFS/Q0104, V1.0 NSQF LEVEL: 4 Lead Carpenter- Wooden
More informationModel Curriculum. Hand Embroiderer
Model Curriculum Hand Embroiderer SECTOR: APPAREL, MADE-UP S AND HOME FURNISHING SUB-SECTOR: Apparel OCCUPATION: EMBROIDERY REF ID: PWD/AMH/Q1001 NSQF LEVEL: 4 Curriculum Aligned for Persons with Hearing
More informationForming and assembling pipework systems
Unit 007 Forming and assembling pipework systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationModel Curriculum. 1. Helper Shuttering carpenter. Construction Real Estate and Infrastructure Construction Shuttering Carpentry CON/Q0301, V1.
Model Curriculum 1. Helper Shuttering carpenter SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction Shuttering Carpentry CON/Q0301, V1.1 1 TABLE
More informationNational Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
More informationModel Curriculum. Lead Assembler Modular Furniture. (Options: Lock Installer)
Model Curriculum Lead Assembler Modular Furniture (Options: Lock Installer) SECTOR: Furniture & Fittings SUB-SECTOR: Modular Furniture OCCUPATION: Production- Modular Furniture REF ID: FFS/Q5103, V1.0
More informationNational Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
More informationSAW-PIERCING. 79. Fig. 29. Placing new blade in saw-frame.
SAW-PIERCING. 79 First make a full-size drawing of the hinge, then by means of transfer paper transfer the design of the butt end to the copper or brass. Then lay out the knuckles as shown in Fig. 28,
More informationLevel 2 Certificate in Design and Craft
Level 2 Certificate in Design and Craft 7716-35 Jewellery Qualification handbook www.cityandguilds.com June 2009 Version 1.0 Candidate name City & Guilds registration number Centre name Centre number Date
More informationModel Curriculum. Cobbler SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Cobbler LEATHER Footwear / Goods and Garments Repairing & Footwear Making LSS/Q4101, V1.0 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Forming and Assembling Pipework Systems T/600/5855 SQA Unit code FT2X 60 SSC Ref Unit 82 History of changes Publication date: March 2012
More informationNATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES WORKSHOP PRACTICE NQF LEVEL 2
NATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES WORKSHOP PRACTICE NQF LEVEL 2 IMPLEMENTATION: JANUARY 2013 INTRODUCTION A. What is Workshop Practice about? Electrical Workshop Practice introduces
More informationContents QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR CONSTRUCTION INDUSTRY. Introduction Qualifications Pack Assistant Shuttering Carpenter
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR CONSTRUCTION INDUSTRY Contents OS describe what individuals need to do, know and understand in order to carry out a particular job role or function OS are
More informationProducing sheet metal components and assemblies
Unit 022 Producing sheet metal components and Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a broad
More informationFURNITURE FINISHING French polish for furniture finishing
1 of 7 level: 5 credit: 20 planned review date: September 2004 sub-field: purpose: entry information: accreditation option: moderation option: Furniture People credited with this unit standard are able
More informationto Precious From Plumbing PROJECT INTERMEDIATE METALS facetjewelry.com FCT-MW
PROJECT INTERMEDIATE METALS From Plumbing to Precious FCT-MW-061217-07 2013 Kalmbach Publishing Co. This material may not be reproduced in any form without permission from the publisher. facetjewelry.com
More informationModel Curriculum. 1. Construction Painter and Decorator
Model Curriculum 1. SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction CONSTRUCTION PAINTING CON/Q0503, V1.0 3 1 2 TABLE OF CONTENTS 1. Curriculum
More informationFitter Mechanical Assembly- CSC/Q0304 (Capital Goods)
- ( ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationNational Certificate: Electrical Engineering: Construction (NQF 2)
National Certificate: Electrical Engineering: Construction (NQF 2) COURSE TITLE SAQA ID NQF CREDITS ETQA National Certificate: Electrical Engineering (Construction) 733313 Level 2 141 1 / 8 CETA Type of
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Higher Certificate in Engineering: NQF Level 5
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Higher Certificate in Engineering: NQF Level 5 Status: Approved by Council Document: E-07-PN Rev 3 26 November
More informationCompetency Based Training (CBT) Curriculum Guide for Embroidery Machine Operator
Competency Based Training (CBT) Curriculum Guide for Embroidery Machine Operator [Market Oriented Short Term (MOST), Modular Curriculum] Developed by Table of Contents 1 INTRODUCTION... 1 2 AIMS... 1 3
More informationFitter Mechanical- Life Sciences-LFS/Q0213 (Life Sciences)
Fitter -LFS/Q0213 (Life ) 1. Minimum qualification for Trainers Sector Job Role / Trade Life Science Fitter Mechanical- Life QP code Minimum qualification of Trainers Minimum years of experience LFS/Q0213
More informationCurriculum For Leather Gloves Stitcher (06 Months) Code:VF53S006
Curriculum For Leather Gloves Stitcher (06 Months) Code:VF53S006 1 Curriculum Template 1. Introduction Template 2. Overview of the course 3. Stitching Practical / Theory - Curriculum Contents (Teaching
More informationSOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Visual Merchandiser
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationQUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR MEDIA AND ENTERTAINMENT INDUSTRY. OCCUPATION: Screen / Script writing REFERENCE ID: MES/ Q 3002
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR MEDIA AND ENTERTAINMENT INDUSTRY OS describe what individuals need to do, know and understand in order to carry out a particular job role or function OS
More information1. Qualification specification
Qualification title: OAL Level 2 NVQ in Woodmachining Qualification number (QN): 603/0213/6 1. Qualification specification 1.1. Qualification purpose This qualification is designed to develop and assess
More informationCNC Operator Turning- CSC/Q0115 (Capital Goods)
- ( ) 1. Minimum qualification for Trainers Sector QP code Job Role / Trade Minimum qualification of Trainers Diploma B.E. B.Tech Minimum Remarks/ Brief Description of the Desired Trainer Profile years
More informationNATIONAL CERTIFICATE (VOCATIONAL)
NATIONAL CERTIFICATE (VOCATIONAL) SUBJECT GUIDELINES ENGINEERING GRAPHICS AND DESIGN (CAD) NQF Level 3 September 2007 ENGINEERING GRAPHICS AND DESIGN (CAD) LEVEL 3 CONTENTS INTRODUCTION 1 DURATION AND
More informationQPEO2/003N Credit Value: 4 QCF Level: 2 GLH: 29 Using and communicating technical information
Performing Engineering Operations QPEO2/003N Credit Value: 4 QCF Level: 2 GLH: 29 Using and communicating technical information Learner Name: EAL Assessment Route Summary This EAL assessment route covers
More informationIPC J-STD-001E TRAINING AND CERTIFICATION PROGRAM LESSON PLAN FOR TRAINING CERTIFIED IPC SPECIALIST (CIS)
Review Questions 1. Minimum end joint width for castellated terminations on a Class 2 product is. A. 100% (W). B. 25% (W). C. 50% (W). D. 75% (W). C, Clause. 7.5.6 Table 7-6, Page 29 2. For Class 3, a
More informationFitter Mechanical- Life Sciences-LFS/Q0213 (Life Sciences)
Mechanical- s- (s) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Mechanical- s Mechanical- s Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required
More informationUNIT Construction Crafts: Bench Joinery (Intermediate 2)
National Unit Specification: general information CODE DX0J 11 COURSE Construction Crafts (Intermediate 2) SUMMARY This Unit is a mandatory Unit within the Intermediate 2 Construction Crafts Course and
More informationForming and Assembling Pipework Systems F/508/4663
Unit Title Ofqual unit reference number (code) Organisation Reference Forming and Assembling Pipework Systems F/508/4663 QU051481 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
More informationFinalized & Validated by Industrial Advisory Group (IAG) 13th December National Competency Standards. For PATWA
Finalized & Validated by Industrial Advisory Group (IAG) 13th December 2013 National Competency Stards For PATWA Page 1 Introduction The National Competency Stards are written specifications of skill knowledge
More informationSKM IN ARCHITECTURAL DRAUGHTING Level 3
2017 SKM IN Level 3 MATRIX TRINITY TECHNOLOGY & CREATIVITY INSTITUTE 10 JALAN SURIA PUCHONG 4, PUSAT PERNIAGAAN SURIA PUCHONG, 47110 PUCHONG, SELANGOR, MALAYSIA TEL: 03-8959 0883/8939 9883 EMAIL: enquiry@mttc.edu.my
More informationGOVERNMENT NOTICE DEPARTMENT OF HIGHER EDUCATION AND TRAINING TRADE TEST REGULATIONS, 2013 SKILLS DEVELOPMENT ACT, 1998
GOVERNMENT NOTICE DEPARTMENT OF HIGHER EDUCATION AND TRAINING No. R Date: TRADE TEST REGULATIONS, 2013 SKILLS DEVELOPMENT ACT, 1998 I, Dr Bonginkosi Emmanuel Nzimande, MP, Minister of Higher Education
More informationContents QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR CONSTRUCTION INDUSTRY. Introduction
QUALIFICATIONS PACK - OCCUPATIONAL STANDARDS FOR CONSTRUCTION INDUSTRY Contents OS describe what individuals need to do, know and understand in order to carry out a particular job role or function OS are
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Using and Communicating Technical Information M/600/5790 SQA Unit code FT2V 60 SSC Ref Unit 80 History of changes Publication date: March
More informationPhoto-Etch Demonstration Notes. Presented at the AMPS Central SC August 11, 2011 Meeting
The basic steps in using PE up-date sets: Photo-Etch Demonstration Notes Presented at the AMPS Central SC August 11, 2011 Meeting 1. Plan Use 2. Cut Part from Fret / Clean up Burrs 3. Bend / Form Part
More informationEntry 3 Skills for Working Life ( )
Entry 3 Skills for Working Life (4807-03) August 2014 Version 1.0 www.cityandguilds.com August 2014 Version 1.0 Unit recording documents for Metalwork (Units 396-400) City & Guilds Believe you can www.cityandguilds.com
More informationFitter Fabrication- CSC/Q0303 (Capital Goods)
1. Minimum qualification for Trainers - ( ) Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Bachelor of Engineering Technology Honours: NQF Level 8
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Bachelor of Engineering Technology Honours: NQF Level 8 Status: Approved by Council Document : E-09-PT Rev
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Bachelor of Engineering Technology: NQF Level 7
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Bachelor of Engineering Technology: NQF Level 7 Status: Approved by Council Document : E-02-PT Rev 3 24 March
More informationCONTEST DESCRIPTION / DESCRIPTION DE CONCOURS PLUMBING PLOMBERIE POST- SECONDARY / NIVEAUX POSTSECONDAIRE
CONTEST DESCRIPTION / DESCRIPTION DE CONCOURS PLUMBING PLOMBERIE POST- SECONDARY / NIVEAUX POSTSECONDAIRE Table of Contents 1 THE ESSENTIAL SKILLS FOR CAREERS IN THE SKILLED TRADES AND TECHNOLOGY... 3
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION. -Module Number Session
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY NATIONAL CERTIFICATE MODULE: UNIT SPECIFICATION GENERAL INFORMATION -Module Number- 8210014 -Session- 1994-95 -Superclass- VF -Title- DRAWING SKILLS: TECHNICAL DRAUGHTING
More informationIt is suitable for a range of candidates with an interest in furniture making and related industries.
National Unit specification: general information Unit code: H3MK 11 Superclass: JP Publication date: April 2013 Source: Scottish Qualifications Authority Version: 02 Summary This Unit has been designed
More informationDESIGN AND TECHNOLOGY
N E W S O U T H W A L E S HIGHER SCHOOL CERTIFICATE EXAMINATION 1997 DESIGN AND TECHNOLOGY 2/3 UNIT (COMMON) (40 Marks) Time allowed One hour and a half (Plus 5 minutes reading time) DIRECTIONS TO CANDIDATES
More informationSAQCC FIRE D&GS TRAINING SUB COMMITTEE COURSE CURRICULUM
SAQCC FIRE D&GS TRAINING SUB COMMITTEE COURSE CURRICULUM COURSE ORIGINATOR Fire Detection - Workshop Practice and Safety Shane Nefdt DATE 09th January 2013 Amendment 1 05th October 2013 Change "student"
More informationProducing mechanical engineering drawings using a CAD system
Unit 804 Producing mechanical engineering drawings using a CAD system UAN: J/600/5794 Level: Level 2 Credit value: 11 GLH: 61 Relationship to NOS: This unit has been derived from national occupational
More informationEngineering Drawing Office Practice; Graphical Engineering Communication Engineering Draughting Skills; Introduction to CAD/CAM or similar Unit
Higher National Unit Specification General information for centres Unit title: Engineering Drawing Unit code: DR1W 34 Unit purpose: This Unit is designed to enable candidates to gain knowledge of current
More informationLevel 2 Awards in Excavation Support Systems ( ) September 2017 Version 1.1
Level 2 Awards in Excavation Support Systems (6146-21) QUALIFICATION HANDBOOK September 2017 Version 1.1 Qualification at a glance Subject area City & Guilds number 6146 Age group approved 18+ Assessment
More informationVCE VET Engineering Studies: Certificate II Engineering Studies Written examination
Introduction VCE VET Engineering Studies: Certificate II Engineering Studies Written examination The following sample examination is provided to demonstrate the format and types of questions which will
More informationNational Certificate in Wood Product Manufacturing (Level 3)
NQF Ref 0815 Version 3 Page 1 of 10 National Certificate in Wood Product (Level 3) Level 3 Credits 80 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose
More informationMetal clay. Skill Set. Whether you want to learn how to bezel-set a cabochon, Step Up Your. earring project.
PROJECT INTERMEDIATE METAL CLAY Step Up Your Metal clay Skill Set Improve your craft à la carte in this technique-packed earring project. by Deb Fitz FCT-CRON0216_ART48 Whether you want to learn how to
More information