National Certificate: Electrical Engineering: Construction (NQF 2)
|
|
- Maximilian Walker
- 6 years ago
- Views:
Transcription
1 National Certificate: Electrical Engineering: Construction (NQF 2) COURSE TITLE SAQA ID NQF CREDITS ETQA National Certificate: Electrical Engineering (Construction) Level / 8
2 CETA Type of Course Occupational qualification offered on a full-time basis in a learnership format. The purpose of the Qualification: Qualifying learners will be able to perform trade-related skills with specific reference to: - Use engineering tools, measuring instruments and electrical technology. - Read, interpret and produce basic electrical engineering drawings and circuits. - Apply hand skills applicable to electrical installation and maintenance. - Understand and apply basic electrical installation assembly techniques to install, maintain, repair, overhaul or recondition designated circuits, electrical machines and sub-components. - Understand basic electrical theory and the application in relation to the maintenance and function of machines. With this understanding, learners will be able to participate in workplace activities. The foundational learning in this Qualification would serve as a basis for further learning where they will engage in more advanced installation, maintenance and repair activities. 2 / 8
3 Course Structure MODULES TOPICS Building a Portfolio of Evidence Credits 6 - Develop a learning plan and a portfolio for assessment Fundamental Communication Credits 20 3 / 8
4 - Access and use information from texts - Maintain and adapt oral/signed communication - Use language and communication in occupational learning programmes - Write/present for a defined context Fundamental Numeracy Credits 16 - Apply basic knowledge of statistics and probability to influence the use of data and procedures in o - Demonstrate understanding of rational and irrational numbers and number systems - Measure, estimate and calculate physical quantities and explore, describe and represent geometric - Use mathematics to investigate and monitor the financial aspects of personal and community life - Work with a range of patterns and functions and solve problems Introduction to Electrical Engineering Credits12 - Explain the individual`s role within business - Understand fundamentals of electricity Engineering Hand ) Skills (Electrical Trade Credits 25 - Identify, inspect, use, maintain and care for engineering hand tools - Mark off basic regular engineering shapes 4 / 8
5 - Select, use and care for power tools - Carry out basic electric arc welding in an electrical environment Electrical Hand Skills Credits 14 - Apply soldering techniques - Select, use and care for electrical measuring and testing instruments - Install, join and terminate Low Voltage cables and conductors Electrical Installation Techniques (Domestic) Credits 30 - Apply and maintain safety in a working environment - Design and construct a single phase circuit - Install electric wire ways - Install luminaires - Install or replace electrical metering units or measuring instrument - Install, maintain or replace Low Voltage distribution boards, protection devices and components Electrical Maintenance Credits 11 - Identify, inspect, clean and maintain electrical rotating machines - Maintain transformers 5 / 8
6 Computer Literacy Credits 7 - Operate a personal computer system - Use a Graphical User Interface (GUI)-based word processor to create and edit documents Upon successful completion of the course, the learner will be proficient in the following key areas: - Handling of job cards. - Keep the work area safe and productive. - Identify engineering materials, their characteristics and applications. - Knowledge of common metal tests used in an engineering environment. - Marking with different marking instruments. - Measuring with vernier calliper and micro-meter. - Shearing, bending and folding of sheet metal. - Filing surfaces in different shapes to size according technical drawings. - Operate and monitor a drilling machine to produce simple components. - Cutting inside and outside threads. - Cutting materials with hand and power tools. - Dismantling and re-assembling of a complex structure with engineering hand tools. Duration 6 / 8
7 Trainee should be able to complete within12 months, inclusive of workplace-based training and assessment. The institutional-based contact training is 105 days over 21 weeks. Normal training day is 6 hours for Practical Modules and 3 hours for Theory Modules. Minimum Entry Requirements A General Education and Training Certificate at NQF Level 1 with Mathematics and Communication. Career Benefits standards which form part of most qualifcations at NQF level 2 in the automotive, electrical and engineering related sectors. By successful completion of the unit Standards the learner will be registered on the NLrD and the credits will be uploaded to it. The learner will achieve a level of skills which enhances his status in a company or will lead to a formal employment. Assessment Method Continuous assessments (formative) are carried out throughout the training (written tests and practical assignments) in order to monitor progress and quality of learning. A summative assessment is conducted at the end of each module that may include a knowledge test and practical test as well as workplace-based evaluation. 7 / 8
8 Costs and Terms of Payment Upon Request 8 / 8
SOUTH AFRICAN QUALIFICATIONS AUTHORITY REGISTERED QUALIFICATION: Occupational Certificate: Visual Merchandiser
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is
More informationGOVERNMENT NOTICE DEPARTMENT OF HIGHER EDUCATION AND TRAINING TRADE TEST REGULATIONS, 2013 SKILLS DEVELOPMENT ACT, 1998
GOVERNMENT NOTICE DEPARTMENT OF HIGHER EDUCATION AND TRAINING No. R Date: TRADE TEST REGULATIONS, 2013 SKILLS DEVELOPMENT ACT, 1998 I, Dr Bonginkosi Emmanuel Nzimande, MP, Minister of Higher Education
More informationNZQF NQ Ref 1262 Version 3 Page 1 of 22
NZQF NQ Ref 1262 Version 3 Page 1 of 22 National Certificate in (Level 4) with strands in Fitting and Machining, General Engineering, Machining, Maintenance Engineering,, and Electricity Supply Level 4
More informationQPEO2/003N Credit Value: 4 QCF Level: 2 GLH: 29 Using and communicating technical information
Performing Engineering Operations QPEO2/003N Credit Value: 4 QCF Level: 2 GLH: 29 Using and communicating technical information Learner Name: EAL Assessment Route Summary This EAL assessment route covers
More informationNATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES WORKSHOP PRACTICE NQF LEVEL 2
NATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES WORKSHOP PRACTICE NQF LEVEL 2 IMPLEMENTATION: JANUARY 2013 INTRODUCTION A. What is Workshop Practice about? Electrical Workshop Practice introduces
More informationThank you for your interest in the Electrical Technician program. Following is the application process:
Thank you for your interest in the Electrical Technician program. Following is the application process: Information Session: Attendance at an Information Session is a prerequisite to acceptance into EHOVE
More informationAPPLICANT GUIDE ENGINEERING OCCUPATIONS
ENGINEERING OCCUPATIONS OCCUPATION: Fitter - General (ANZSCO 323211) QUALIFICATION: MEM30205 - Certificate III in Engineering Mechanical Trade SKILLS ASSESSMENT - Occupational Requirements A person who
More informationCity and Guilds: Permitted Reference Materials (Electrotech) Version 2.3 (October 2013)
City and Guilds: Permitted Reference Materials (Electrotech) Version 2.3 (October 2013) Qualification Unit/Paper Title Description Permitted Reference *Calculator Materials Allowed? 2330 201-203, Level
More informationSEMPEO Unit H4R3 04 Using and communicating technical information
Overview This standard identifies a range of basic competences that you need to make use of text, numerical and graphical information, by interpreting and using technical information extracted from a range
More informationCanadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles
More informationSEMPEO SQA Unit Code FR0V 04 Using and communicating technical information
Overview This standard identifies a broad range of basic competences that you need to make full use of text, numeric and graphical information, by interpreting and using technical information extracted
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Using and Communicating Technical Information M/600/5790 SQA Unit code FT2V 60 SSC Ref Unit 80 History of changes Publication date: March
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This
More informationManufacturing Operations
End of Course (EOC) Bank Blueprints Manufacturing Operations Table of Contents Table of Contents... 1 About Test Blueprints... 2 Gas Metal Arc Welding... 3 Shielded Metal Arc Welding... 4 Flux Cored Arc
More informationNZQA registered unit standard version 2 Page 1 of 8. Demonstrate knowledge of theory for registration of electrical installers
Page 1 of 8 Title Demonstrate knowledge of theory for registration of electrical installers Level 3 Credits 3 Purpose This unit standard covers the theory assessment required for registration as an electrical
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Bachelor of Engineering Technology: NQF Level 7
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Bachelor of Engineering Technology: NQF Level 7 Status: Approved by Council Document : E-02-PT Rev 3 24 March
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Bachelor of Engineering Technology Honours: NQF Level 8
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Bachelor of Engineering Technology Honours: NQF Level 8 Status: Approved by Council Document : E-09-PT Rev
More informationNational Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
More informationNATIONAL CERTIFICATE (VOCATIONAL)
NATIONAL CERTIFICATE (VOCATIONAL) SUBJECT GUIDELINES ENGINEERING GRAPHICS AND DESIGN (CAD) NQF Level 3 September 2007 ENGINEERING GRAPHICS AND DESIGN (CAD) LEVEL 3 CONTENTS INTRODUCTION 1 DURATION AND
More informationABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5)
Purpose Statement ABC Level 2 Certificate in Footwear and Leather (NVQ) (500/6572/5) ABC Awards is at the forefront of developments within the fashion and textiles sector and has a suite of vocational
More informationENGINEERING COUNCIL OF SOUTH AFRICA. Qualification Standard for Higher Certificate in Engineering: NQF Level 5
ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Qualification Standard for Higher Certificate in Engineering: NQF Level 5 Status: Approved by Council Document: E-07-PN Rev 3 26 November
More information1. Qualification specification
Qualification title: OAL Level 2 NVQ in Woodmachining Qualification number (QN): 603/0213/6 1. Qualification specification 1.1. Qualification purpose This qualification is designed to develop and assess
More informationHeating Ventilating Air Conditioning - Refrigeration COURSE SYLLABUS
Heating Ventilating Air Conditioning - Refrigeration COURSE SYLLABUS 2017-2018 Course Description The Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) Technology program provides a balance
More informationUNIT Computer Aided Draughting (CAD) for Engineers (SCQF level 5)
National Unit Specification: general information CODE F5H4 11 SUMMARY This Unit may form part of a National Qualification Group Award or may be offered on a free standing basis. This largely practical
More informationModel Curriculum. Irrigation Service Technician
Model Curriculum Irrigation Service Technician TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites 09 3. Annexure: Assessment Criteria 10 Irrigation Service Technician CURRICULUM / SYLLABUS This
More informationEngineering and Design
End of Course (EOC) Bank Blueprints Engineering and Design Table of Contents Table of Contents... 1 About Test Blueprints... 2 Engineering Design... 3 Engineering Principles... 4 Manufacturing Operations...
More informationE x p l o r a t i o n o f i n t E r a c t i v E D i g i t a l M E D i a
9 0 9 3 E x p l o r a t i o n o f i n t E r a c t i v E D i g i t a l M E D i a 15S/15E/15M 10S/10E/10M An Interactive Digital Media Course 9 0 9 3 : E x p l o r a t i o n o f i n t E r a c t i v E D
More informationApprenticeshipsNI Level 2 Bench Joinery & Level 3 Bench Joinery
Level 2 Bench Joinery & Level 3 Bench Joinery in Bench Joinery combines the practical hands-on experience of the workplace with the knowledge and workshops. What will the student study? NVQ Level 2 Diploma
More informationBRONX COMMUNITY COLLEGE DIVISION OF ACADEMIC AFFAIRS
BRONX COMMUNITY COLLEGE DIVISION OF ACADEMIC AFFAIRS AUTOMOTIVE TECHNOLOGY PROGRAM ASSESSMENT PLANNING TEMPLATE May 15, 2009 Department/Program Physics and Technology Automotive Technology Program Department
More informationLevel 1 Diploma in Plastering
Level 1 Diploma in Plastering The Level 1 Diploma in Plastering offers a good grounding in the practical skills and knowledge designed to prepare the trainee for entry into the trowel trades and the construction
More informationModel Curriculum. Crochet Lace Tailor SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Crochet Lace Tailor HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE TAILOR HCS/Q7705, V1.0 3 Crochet Lace Tailor 1 SSC Logo
More informationPearson BTEC Level 3 National Extended Certificate in Engineering Specification
Pearson BTEC Level 3 National Extended Certificate in Engineering Specification First teaching September 2016 Issue 1 Edexcel, BTEC and LCCI qualifications Edexcel, BTEC and LCCI qualifications are awarded
More informationCurriculum for Industrial Electrician (Assistant) (NVQF level 2)
National Vocational and Technical Training Commission (NAVTTC) Curriculum for Industrial Electrician (Assistant) (NVQF level 2) TVET- GFA Contents 1. Introduction 3 1.1 Overall course objectives 3 1.2
More informationNational Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
More informationDIABLO VALLEY COLLEGE CATALOG
Engineering technology ENGINEERING TECHNOLOGY - ENGTC Tish Young, Dean Physical Sciences and Engineering Division Physical Sciences Building, Room 263 Possible career opportunities Career options in engineering
More informationJOB DESCRIPTION. Coachella Valley Water District October 12, DEPARTMENT: Facilities and Maintenance REPORTING RELATIONSHIP:
Coachella Valley Water District October 12, 2017 TITLE: Electronic Technician II SECTION: Electronics Shop DEPARTMENT: Facilities and Maintenance REPORTING RELATIONSHIP: Reports to: Electronics Supervisor,
More informationQualification Specification. Level 1 Diploma in Providing a Gateway to Smart Engineering
Qualification Specification Level 1 Diploma in Providing a Gateway to Smart Engineering ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Centre requirements 5 Support for candidates 5
More informationOroville Union High School District Industrial Technology
Oroville Union High School District Industrial Technology Industrial Technology - ROP Fabrication ROP Fabrication COURSE TITLE: ROP Fabrication LENGTH OF COURSE: One Year (2 hours per day) GRADE LEVEL:
More informationCURRICULUM FOR ELECTROMECHANICAL TECHNICIAN [EMT]
CURRICULUM FOR ELECTROMECHANICAL TECHNICIAN [EMT] 1989 (A Competency Based Short-term Curriculum) Council for Technical Education and Vocational Training CURRICULUM DEVELOPMENT DIVISION Sanothimi, Bhaktapur
More informationAUTOMOTIVE TECHNICIAN Technical Diploma
AUTOMOTIVE TECHNICIAN Technical Diploma Program Code: 32-404-2 our graduates INDEMAND 2017/2018 mstc.edu automotive technician career pathway AUTOMOTIVE TECHNICIAN Mid-State s Automotive Technician program
More informationClass Title Description Credit Hours Contact Hours Lecture Hours Lab Hours ESU NOTE
2 3 4 AIT 1010 Construction Measurements and Calculations Course covers fundamental measuring and calculation skills essential to the skilled craftsperson working in the construction industry. Provides
More informationNational Certificate in Wood Product Manufacturing (Level 3)
NQF Ref 0815 Version 3 Page 1 of 10 National Certificate in Wood Product (Level 3) Level 3 Credits 80 This qualification is expiring. The last date to meet the requirements is 31 December 2011. Purpose
More informationModel Curriculum. Hand Crochet Lace Maker HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3
Model Curriculum Hand Crochet Lace Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3 Hand Crochet Lace Maker
More informationInsteel Industries, Inc. Job Description
Job Description Insteel Industries, Inc. Job Description Job Title: Department: Location: Reports To: FLSA Status: Maintenance - Electrical (027) Maintenance (075) Insteel Wire Products, St. Joseph, MO
More informationTechnology Service Excellence. Training Overview
Technology Service Excellence Training Overview Background information Overview In an ever -growing economy; power, electricity, telecommunications, construction and transport is the future. TIS provides
More informationProducing components using hand fitting techniques
Unit 005 Producing components using hand fitting techniques Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required
More informationDIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits)
DIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits) SAQA ID: 100951, CHE NUMBER: H16/14237/HEQSF Campus where offered: Arts Campus REMARKS a. Admission requirement(s)
More informationConstruction Building (Wales)
Construction Building (Wales) IMPORTANT NOTIFICATION FOR ALL APPRENTICESHIP STARTS FROM 14 OCTOBER 2016 Modifications to SASW came into effect on 14 October 2016. These changes relate to the Essential
More informationBlueprint Reading
Western Technical College 31420302 Blueprint Reading Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Introduction to ready
More informationProducing sheet metal components and assemblies
Unit 022 Producing sheet metal components and Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a broad
More informationModel Curriculum. Wax Setter (Basic) Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL:
Model Curriculum Wax Setter (Basic) Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: Gem & Jewellery Cast and diamonds -Set Jewellery Wax-Setting G&J/Q2703, Version 1.0 3 Format:
More informationArticulation of Certification for Manufacturing
Paper ID #15889 Articulation of Certification for Manufacturing Dr. Ali Ahmad, Northwestern State University Ali Ahmad is the Head of the Engineering Technology Department at Northwestern State University
More informationM i c r o p r o c e s s o r s ( 1 2 C )
9 0 5 2 M i c r o p r o c e s s o r s ( 1 2 C ) 40S/40E/40M An Electronics Technology Course 9 0 5 2 : M i c r o p r o e s s o r s ( 1 2 C ) 4 0 S / 4 0 E / 4 0 M Course Description This course focuses
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR:
MODEL CURRICULUM Tarakasi Jeweller SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY Handmade Gold and Gems-Set Jewellery, Silversmithing Component making/filing/assembling G&J/Q9202,
More informationCanadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) ELECTRICAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving
More informationNational Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3
NZQF NQ Ref 1336 Version 2 Page 1 of 6 National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3 Credits 74-98 This qualification
More informationAcceptable Work for Registration as a Registered Lifting Machinery Inspector (RegLMI) E C S A
POLICY STATEMENT R2/1J Acceptable Work for Registration as a Registered Lifting Machinery Inspector (RegLMI) 19/05/2011 E C S A ENGINEERING COUNCIL OF SOUTH AFRICA Private Bag X 691 BRUMA 2026 Water View
More informationHIRING COMPANY: Dynomax Inc. INDUSTRY: Aerospace and Defense POSITION: CNC Programmers, Machinists, Operators
CNC Programmers, Machinists, Operators Dynomax is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/cnc milling
More informationContents Introduction Overview about the programme Curriculum for Electrical Equipment Installer & Repairer (Assistant) NVQF Level2
1 2 Contents 1. Introduction 4 1.1 course objectives 4 1.2 Course competencies 4 1.3 Job opportunities 5 1.4 Trainee entry level 5 1.5 Trainer requirements 5 1.6 Teaching strategies in a competency-based
More informationCanadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving
More informationLearners will continue to develop and grow as valued employees and demonstrate skills that contribute to lifelong learning.
NZQF NQ Ref 0231 Version 13 Page 1 of 18 National Certificate in Employment Skills Level 1 Credits 60 Purpose The National Certificate in Employment Skills (NCES) recognises core skills and attributes
More informationMACHINIST (3 Month Course) Revised May, 2009
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,
More informationHigher National Unit specification. General information. Unit title: CAD: Principles (SCQF level 7) Unit code: DW Unit purpose.
Higher National Unit specification General information Unit code: DW16 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (July 2016) Unit purpose This
More informationF u r n i t u r e M a k i n g ( 1 2 A )
9 1 8 2 F u r n i t u r e M a k i n g ( 1 2 A ) 40S/40E/40M A Cabinet and Furniture Making Course 9 1 8 2 : F u r n i t u r e M a k i n g ( 1 2 A ) 4 0 S / 4 0 E / 4 0 M Course Description In this course,
More informationUNIT Construction Crafts: Bench Joinery (Intermediate 2)
National Unit Specification: general information CODE DX0J 11 COURSE Construction Crafts (Intermediate 2) SUMMARY This Unit is a mandatory Unit within the Intermediate 2 Construction Crafts Course and
More informationGallatin College Departmental Assessment Plans
Gallatin College Departmental Assessment Plans Gallatin College started building assessment reports and Program Outcomes Assessment plans Fall 2014, so the reports below are the schedules and samples from
More informationCareer Focus TUCSIN Trades in Namibia - Mechanical Engineering Trades MECHANICAL ENGINEERING TRADES. Dear Students
TUCSIN 2015 Trades in Namibia - Mechanical Engineering Trades Volume3, Issue 3 MARCH 2015 Dear Students Education is one thing that really sets the life of a student as far as his/her career is concerned.
More informationArrangements for: National Progression Award in Food Manufacture (SCQF level 6) Group Award Code: GF4N 46. Validation date: July 2012
Arrangements for: National Progression Award in Manufacture (SCQF level 6) Group Award Code: GF4N 46 Validation date: July 2012 Date of original publication: Version: 03 Acknowledgement SQA acknowledges
More informationCurriculum Document. Name Phone Logo. TETA House 344 Pretoria Avenue Randburg Gauteng. Physical Address. Postal Address
Curriculum Document Occupational Code Qualification Title NQF Level 671301-002 Railway Traction Line Worker 4 Name Email Phone Logo Development Quality Partner Transport Education and Training Authority
More informationCredentials for Career Technical Education Teachers and/or Students
s for Career Technical Education Teachers and/or Students 2012-2013 Concentration - Automotive Technology Engine National Institute for Automotive Performance* Service Excellence () Brakes* Electrical/
More informationBAA ADVANCED JOINERY FRAMEWORK 12
BAA ADVANCED JOINERY FRAMEWORK 12 DISTRICT NAME: Coquitlam DISTRICT NUMBER: SD#43 DEVELOPED BY: Dave Jones DATE DEVELOPED: April 20, 2006 SCHOOL NAME: Dr. Charles Best PRINCIPAL S NAME: Brian Fichter BOARD/AUTHORITY
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationName. Occupational Certificate: Vehicle Damage Quantifier VDQGBSA PORTFOLIO OF EVIDENCE FOR RPL. Recognition of Prior Learning
2 Recognition of Prior Learning Portfolio of Evidence Name Name ID Number 00000000000 Day time contact Area code: 000 telephone number Tel number: 0000000 Email address Qualification or Unit Standard title
More informationCabrillo College Catalog
ENGINEERING TECHNOLOGY Natural and Applied Sciences Division Wanda Garner, Division Dean Division Office, Room 701 Gary Marcoccia, Program Chair, (831) 479-5705 Aptos Counselor: (831) 479-6274 for appointment
More informationCanadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Preamble Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) These CTAC are applicable to programs having titles involving
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationTECHNOLOGY AND ENGINEERING
Technology & Engineering 9 2 semesters Prerequisite: Freshman standing only. (Four, 9 week segments) Every nine weeks the students will experience a different area of technology. They will study metals,
More informationModel Curriculum. Wax Setter (Basic) GEM & JEWELLERY CAST AND DIAMONDS -SET JEWELLERY WAX-SETTING G&J/Q2703, VERSION 1.0 3
Model Curriculum Wax Setter (Basic) SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY CAST AND DIAMONDS -SET JEWELLERY WAX-SETTING G&J/Q2703, VERSION 1.0 3 TABLE OF CONTENTS 1. Curriculum
More informationF u t u r e s i n i n t e r a c t i v e D i g i t a l M e D i a
9 1 0 1 F u t u r e s i n i n t e r a c t i v e D i g i t a l M e D i a 40S/40E/40M An Interactive Digital Media Course 9 1 0 1 : F u t u r e s i n i n t e r a c t i v e D i g i t a l M e D i a 4 0 s
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.0 3 TABLE OF CONTENTS Curriculum Trainer Prerequisites 01 05 3. Annexure:
More informationProducing platework components and assemblies
Unit 823 Producing platework components and assemblies UAN: R/600/5880 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: Endorsement by a sector or regulatory body: Aim: This unit has been derived
More informationMy Career in Welding Engineering
1 My Career in Welding Engineering 2 With a Certificate in Welding Engineering, graduates may have the possible career options of the following: Furniture Maker Welder & Frame Cutter Sheet-Metal Worker
More informationElectronics. Module Descriptor
The Further Education and Training Awards Council (FETAC) was set up as a statutory body on 11 June 2001 by the Minister for Education and Science. Under the Qualifications (Education & Training) Act,
More informationAGRICULTURE COMPETENCIES
STATE OF WYOMING AGRICULTURE &NATURAL RESOURCES CLUSTER AND AGRICULTURAL MECHANICS PATHWAY COMPETENCIES AGRICULTURE COMPETENCIES Cluster Level Core Competencies & Objectives AS1 Students will demonstrate
More informationMetal and Engineering
2007 HIGHER SCHOOL CERTIFICATE EXAMINATION Metal and Engineering Total marks 80 General Instructions Reading time 5 minutes Working time 2 hours Write using black or blue pen Board-approved calculators
More informationNATIONAL CERTIFICATE (VOCATIONAL) ELECTRICAL WORKMANSHIP NQF LEVEL 3 NOVEMBER 2009
NATIONAL CERTIFICATE (VOCATIONAL) ELECTRICAL WORKMANSHIP NQF LEVEL 3 NOVEMBER 2009 (12041013) 3 November (X-Paper) 09:00 12:00 This question paper consists of 5 pages. (12041013) -2- NC740(E)(N3)V TIME:
More informationAutomotive Body and Glass Repairer Career Exploration via a Hands-On Paint Scratch Repair Activity. Edward J. Lazaros. Ball State University
Automotive Body and Glass Repairer Career Exploration via a Hands-On Paint Scratch Repair Activity Edward J. Lazaros Ball State University ejlazaros@bsu.edu Introduction Automotive body and glass repairers
More informationWhile entry is at the discretion of the centre, candidates would normally be expected to have attained one of the following, or equivalent:
National Unit Specification: general information CODE F5J6 12 SUMMARY This Unit introduces candidates to operational amplifiers. Knowledge and understanding will be developed through parameter description,
More informationSample Portfolio. NCFE Level 2 Certificate in Engineering Studies (601/4532/8) Unit 01 Introduction to engineering (J/506/3765)
Engineering and Manufacturing Technologies Sample Portfolio NCFE Level 2 Certificate in Engineering Studies (601/4532/8) 2 Contents Introduction 3 Learner evidence and external moderator commentary 4 Evidence
More informationTechnology Education Classes
Technology Education Classes Skills That Get Jobs! Technology Education at Burnaby North Technology is a dominant force in today's society. Technological literacy is as essential to participation in modern
More informationWORLDSKILLS STANDARD SPECIFICATION
WSC2015_WSSS05 WORLDSKILLS STANDARD SPECIFICATION Skill 05 Mechanical Engineering Design - CAD THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) GENERAL NOTES ON THE WSSS The WSSS specifies the knowledge,
More informationCanadian Technology Accreditation Criteria (CTAC) POWER SYSTEMS ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) POWER SYSTEMS ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving
More informationSEMPEO SQA Unit Code FP2A 04 Carrying out aircraft detail fitting activities
Overview This standard covers a broad range of basic aircraft detail fitting competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression between education
More informationStrands & Standards MACHINING 2
Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill
More informationCertified Electrician Training Program
FINAL CERTIFICATION AWARDED BY IMRTC - USA Certified Electrician Training Program This highly specialized and concentrated Program is ideally suited to following individuals who: A people who would like
More informationThe current choices within Technology are in the following focus areas.
TECHNOLOGY - https://twitter.com/llanishentech Mr M Beckett - Curriculum Leader, GCSE Product Design. Website Link - www.llanishenhighschool.co.uk/subjects/designtechnology There are two very useful short
More informationModel Curriculum. Draughtsman SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Model Curriculum Construction Real Estate and Infrastructure Construction Draughting CON/Q1301 4 2 TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites
More informationProcess Operations: Oil and Gas Separation
National Unit specification: general information Unit code: FM3C 11 Superclass: YC Publication date: May 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is designed for candidates
More informationCurriculum for Electrical & Electronic Assembler (Assistant) (NVQF level 2)
National Vocational and Technical Training Commission (NAVTTC) Curriculum for Electrical & Electronic Assembler (Assistant) (NVQF level 2) TVET-GFA Contents 1. Introduction 3 1.1 Overall course objectives
More informationCNC Lathe Production Technician
Brief Program Description The CNC Lathe Production Technician program is a 9 week online program designed to help students gain the skills and knowledge required for work as entry-level CNC lathe production
More information